Consolidation of multipath logic. Better system separation

include/ZeroTierOne.h

@@ -420,157 +420,6 @@ enum ZT_ResultCode
  */
 #define ZT_ResultCode_isFatal(x) ((((int)(x)) >= 100)&&(((int)(x)) < 1000))
 
-
-/**
- *  Multipath bonding policy
- */
-enum ZT_MultipathBondingPolicy
-{
-	/**
-	 * Normal operation. No fault tolerance, no load balancing
-	 */
-	ZT_BONDING_POLICY_NONE = 0,
-
-	/**
-	 * Sends traffic out on only one path at a time. Configurable immediate
-	 * fail-over.
-	 */
-	ZT_BONDING_POLICY_ACTIVE_BACKUP = 1,
-
-	/**
-	 * Sends traffic out on all paths
-	 */
-	ZT_BONDING_POLICY_BROADCAST = 2,
-
-	/**
-	 * Stripes packets across all paths
-	 */
-	ZT_BONDING_POLICY_BALANCE_RR = 3,
-
-	/**
-	 * Packets destined for specific peers will always be sent over the same
-	 * path.
-	 */
-	ZT_BONDING_POLICY_BALANCE_XOR = 4,
-
-	/**
-	 * Balances flows among all paths according to path performance
-	 */
-	ZT_BONDING_POLICY_BALANCE_AWARE = 5
-};
-
-/**
- * Multipath active re-selection policy (linkSelectMethod)
- */
-enum ZT_MultipathLinkSelectMethod
-{
-	/**
-	 * Primary link regains status as active link whenever it comes back up
-	 * (default when links are explicitly specified)
-	 */
-	ZT_MULTIPATH_RESELECTION_POLICY_ALWAYS = 0,
-
-	/**
-	 * Primary link regains status as active link when it comes back up and
-	 * (if) it is better than the currently-active link.
-	 */
-	ZT_MULTIPATH_RESELECTION_POLICY_BETTER = 1,
-
-	/**
-	 * Primary link regains status as active link only if the currently-active
-	 * link fails.
-	 */
-	ZT_MULTIPATH_RESELECTION_POLICY_FAILURE = 2,
-
-	/**
-	 * The primary link can change if a superior path is detected.
-	 * (default if user provides no fail-over guidance)
-	 */
-	ZT_MULTIPATH_RESELECTION_POLICY_OPTIMIZE = 3
-};
-
-/**
- * Mode of multipath link interface
- */
-enum ZT_MultipathLinkMode
-{
-	ZT_MULTIPATH_SLAVE_MODE_PRIMARY = 0,
-	ZT_MULTIPATH_SLAVE_MODE_SPARE = 1
-};
-
-/**
- * Strategy for path monitoring
- */
-enum ZT_MultipathMonitorStrategy
-{
-	/**
-	 * Use bonding policy's default strategy
-	 */
-	ZT_MULTIPATH_SLAVE_MONITOR_STRATEGY_DEFAULT = 0,
-
-	/**
-	 * Does not actively send probes to judge aliveness, will rely
-	 * on conventional traffic and summary statistics.
-	 */
-	ZT_MULTIPATH_SLAVE_MONITOR_STRATEGY_PASSIVE = 1,
-
-	/**
-	 * Sends probes at a constant rate to judge aliveness.
-	 */
-	ZT_MULTIPATH_SLAVE_MONITOR_STRATEGY_ACTIVE = 2,
-
-	/**
-	 * Sends probes at varying rates which correlate to native
-	 * traffic loads to judge aliveness.
-	 */
-	ZT_MULTIPATH_SLAVE_MONITOR_STRATEGY_DYNAMIC = 3
-};
-
-/**
- * Strategy for re-balancing protocol flows
- */
-enum ZT_MultipathFlowRebalanceStrategy
-{
-	/**
-	 * Flows will only be re-balanced among links during
-	 * assignment or failover. This minimizes the possibility
-	 * of sequence reordering and is thus the default setting.
-	 */
-	ZT_MULTIPATH_FLOW_REBALANCE_STRATEGY_PASSIVE = 0,
-
-	/**
-	 * Flows that are active may be re-assigned to a new more
-	 * suitable link if it can be done without disrupting the flow.
-	 * This setting can sometimes cause sequence re-ordering.
-	 */
-	ZT_MULTIPATH_FLOW_REBALANCE_STRATEGY_OPPORTUNISTIC = 0,
-
-	/**
-	 * Flows will be continuously re-assigned the most suitable link
-	 * in order to maximize "balance". This can often cause sequence
-	 * reordering and is thus only reccomended for protocols like UDP.
-	 */
-	ZT_MULTIPATH_FLOW_REBALANCE_STRATEGY_AGGRESSIVE = 2
-};
-
-/**
- * Indices for the path quality weight vector
- */
-enum ZT_MultipathQualityWeightIndex
-{
-	ZT_QOS_LAT_IDX,
-	ZT_QOS_LTM_IDX,
-	ZT_QOS_PDV_IDX,
-	ZT_QOS_PLR_IDX,
-	ZT_QOS_PER_IDX,
-	ZT_QOS_THR_IDX,
-	ZT_QOS_THM_IDX,
-	ZT_QOS_THV_IDX,
-	ZT_QOS_AGE_IDX,
-	ZT_QOS_SCP_IDX,
-	ZT_QOS_WEIGHT_SIZE
-};
-
 /**
  * Status codes sent to status update callback when things happen
  */