diff --git a/README.md b/README.md
index adcc9db..3406c85 100644
--- a/README.md
+++ b/README.md
@@ -8,9 +8,100 @@ Decentralized WiFi Controller
 |[patches-pending](https://github.com/berlin-open-wireless-lab/patches-pending)|Pending OpenWrt Patches DAWN is depending on|
 |[bowl-feed](https://github.com/berlin-open-wireless-lab/bowl-feed)|Feed for DAWN|
 
-[Install](INSTALL.md)
+## Installation
+
+See [installation](INSTALL.md).
 
 ## Setting up Routers
 
 You can find a good guide to configure your router is [here](https://gist.github.com/braian87b/bba9da3a7ac23c35b7f1eecafecdd47d).
 I setup the OpenWRT Router as dump APs.
+
+## Configuration
+
+
+|Option             |Standard | Meaning |
+|-------------------|---------|---------|
+|ht_support         |  '10'   |If AP and station support high throughput.|
+|vht_support        |  '100'  |If AP and station support very high throughput.|
+|no_ht_support      |  '0'    |If AP and station not supporting high throughput.|
+|no_vht_support     |  '0'    |If AP and station not supporting very high throughput.
+|rssi               |  '10'   |If RSSI is greater equal rssi_val.|
+|low_rssi           |  '-500' |If RSSI is less than low_rssi_val.|
+|freq               |  '100'  |If connection is 5Ghz.|
+|chan_util          |  '0'    |If channel utilization is lower chan_util_val.|
+|max_chan_util      |  '-500' |If channel utilization is greater max_chan_util_val.|
+|rssi_val           |  '-60'  |Threshold for an good RSSI.|
+|low_rssi_val       |  '-80'  |Threshold for an bad RSSI.|
+|chan_util_val      |  '140'  |Threshold for an good channel utilization.|
+|max_chan_util_val  |  '170'  |Threshold for a bad channel utilization.|
+|min_probe_count    |  '2'    |Minimum number of probe requests aftrer calculating if AP is best and sending a probe response.|
+|bandwith_threshold |  '6'    |Threshold for the receiving bit rate indicating if a client is in an active transmission.|
+|use_station_count  |  '1'    |Use station count as metric.|
+|max_station_diff   |  '1'    |Maximal station difference that is allowed.|
+|eval_probe_req     |  '1'    |Evaluate the incoming probe requests.|
+|eval_auth_req      |  '1'    |Evaluate the incomning authentication reqeuests.|
+|eval_assoc_req     |  '1'    |Evaluate the incoming association requests.|
+|deny_auth_reason   |  '1'    |Status code for denying authentications.|
+|deny_assoc_reason  |  '17'   |Status code for denying associations.|
+|use_driver_recog   |  '1'    |Allow drivers to connect after a certain time.|
+
+
+## ubus interface
+To get an overview of all connected Clients sorted by the SSID.
+
+    root@OpenWrt:~# ubus call dawn get_network
+    {
+	    "Free-Cookies": {
+		    "00:27:19:XX:XX:XX": {
+			    "78:02:F8:XX:XX:XX": {
+				    "freq": 2452,
+				    "ht": 1,
+				    "vht": 0,
+				    "collision_count": 4
+			    }
+		    },
+		    "A4:2B:B0:XX:XX:XX": {
+			    "48:27:EA:XX:XX:XX: {
+				    "freq": 2412,
+				    "ht": 1,
+				    "vht": 0,
+				    "collision_count": 4
+			    },
+		    }
+	    },
+	    "Free-Cookies_5G": {
+    		
+	    }
+    }
+To get the hearing map you can use:
+
+    root@OpenWrt:~# ubus call dawn get_hearing_map
+    {
+	    "Free-Cookies": {
+		    "0E:5B:DB:XX:XX:XX": {
+			    "00:27:19:XX:XX:XX": {
+				    "signal": -64,
+				    "freq": 2452,
+				    "ht_support": true,
+				    "vht_support": false,
+				    "channel_utilization": 12,
+				    "num_sta": 1,
+				    "ht": 1,
+				    "vht": 0,
+				    "score": 10
+			    },
+			    "A4:2B:B0:XX:XX:XX": {
+				    "signal": -70,
+				    "freq": 2412,
+				    "ht_support": true,
+				    "vht_support": false,
+				    "channel_utilization": 71,
+				    "num_sta": 3,
+				    "ht": 1,
+				    "vht": 0,
+				    "score": 10
+			    }
+		    }
+	    }
+    }