UNVR-NAS/overlay/filesystem/usr/lib/init/boot/ubnt-init.sh

#!/bin/bash

case "$1" in
    start)
        # Load our kernel modules
        /usr/sbin/modprobe ubnt-mtd-lock # Force our /dev/mtd* as RO
        /usr/sbin/modprobe btrfs

        # Set our kernel panic timeout SUPER short so we reboot on crash
        echo 2 > /proc/sys/kernel/panic

        # Setup bluetooth hci0 device
        /usr/lib/init/boot/ubnt-bt.sh hci0
        ;;
    stop)
        # Tear down BT
        hciconfig hci0 down
        ;;
    *)
        echo "Invalid command $1"
        ;;
esac
fix: tune reboot timeout on panic, improve shutdown ulcmd support * Ensure we have all the right targets for ulcmd-shutdown-hook to show the shutdown message * Move to an init script that we can use for setup commands, like adjusting our kernel panic timeout. 2024-05-27 18:07:51 +00:00			`#!/bin/bash`

feat: initial bluetooth support (#9) * Enable Bluetooth LE radio support * Build our own bccmd which we need to setup/enable this BT chipset sadly * Use our own tool we build to interface with the ubnt eeprom, so we can not rely on their custom kernel module * Also fix HDDs not spinning down on shutdown, doing something similar to how unifi does it but a tad more generic. 2024-06-13 01:38:37 +00:00			`case "$1" in`
			`start)`
			`# Load our kernel modules`
fix: improvements across the board * Update README.md, make sure the disclaimer is seen before install instructions. * update ustorage to have temp readings on some samsung ssds (stupid samsung) * Patch and support ulcmd relying on output from ubnteeprom * Move away from ubnthal FINALLY now that we patched ulcmd (hacky but works!) * added README.md to ubnteeprom, since I expect at somepoint folks will fork/use it for other projects. * Added our own kernel module to force mtd's RO, which does a better job than ubnthal did :) 2024-06-16 18:50:44 +00:00			`/usr/sbin/modprobe ubnt-mtd-lock # Force our /dev/mtd* as RO`
feat: initial bluetooth support (#9) * Enable Bluetooth LE radio support * Build our own bccmd which we need to setup/enable this BT chipset sadly * Use our own tool we build to interface with the ubnt eeprom, so we can not rely on their custom kernel module * Also fix HDDs not spinning down on shutdown, doing something similar to how unifi does it but a tad more generic. 2024-06-13 01:38:37 +00:00			`/usr/sbin/modprobe btrfs`
fix: tune reboot timeout on panic, improve shutdown ulcmd support * Ensure we have all the right targets for ulcmd-shutdown-hook to show the shutdown message * Move to an init script that we can use for setup commands, like adjusting our kernel panic timeout. 2024-05-27 18:07:51 +00:00
feat: initial bluetooth support (#9) * Enable Bluetooth LE radio support * Build our own bccmd which we need to setup/enable this BT chipset sadly * Use our own tool we build to interface with the ubnt eeprom, so we can not rely on their custom kernel module * Also fix HDDs not spinning down on shutdown, doing something similar to how unifi does it but a tad more generic. 2024-06-13 01:38:37 +00:00			`# Set our kernel panic timeout SUPER short so we reboot on crash`
			`echo 2 > /proc/sys/kernel/panic`

			`# Setup bluetooth hci0 device`
			`/usr/lib/init/boot/ubnt-bt.sh hci0`
			`;;`
			`stop)`
			`# Tear down BT`
			`hciconfig hci0 down`
			`;;`
			`*)`
			`echo "Invalid command $1"`
			`;;`
			`esac`