fix: update to 4.0.6 and improved unvr support

* We should hopefully have working fans for the UNVR4 now
* Update to latest pre-release unifi firmware 4.0.6
* Improve hwmon logic in our scripts

overlay/filesystem/etc/systemd/system/unvr-fan-daemon.service

@@ -1,5 +1,5 @@
 [Unit]
-Description=Fan Controller daemon for the UNVR Pro
+Description=Fan Controller daemon for the UNVR/UNVRPRO
 Requires=ubnt-init.service
 
 [Service]

overlay/filesystem/usr/bin/unvr-fan-daemon

@@ -21,9 +21,21 @@ THERMAL_SYS_PATHS = {
             "/sys/class/hwmon/hwmon0/device/pwm3",
         ],
     },
+    "UNVR4": {
+        "thermal": [
+            "/sys/devices/virtual/thermal/thermal_zone0/temp",
+            "/sys/class/hwmon/hwmon0/device/temp1_input",
+            "/sys/class/hwmon/hwmon0/device/temp2_input",
+            "/sys/class/hwmon/hwmon0/device/temp3_input",
+        ],
+        "fan_pwms": [
+            "/sys/class/hwmon/hwmon0/device/pwm1",
+            "/sys/class/hwmon/hwmon0/device/pwm2",
+            "/sys/class/hwmon/hwmon0/device/pwm3",
+        ],
+    },
 }
 
-
 def __get_board_temps():
     # Are we supported?
     if get_ubnt_shortname() not in THERMAL_SYS_PATHS:
@@ -36,10 +48,18 @@ def __get_board_temps():
         try:
             with open(path, "r") as f:
                 board_temps.append(int(f.readline().rstrip("\n")))
+        except FileNotFoundError:
+            # If we are here, either it doesn't exist, OR, we need to change paths from 
+            # /sys/class/hwmon/hwmon0/device/temp*_input to /sys/class/hwmon/hwmon0/temp*_input 
+            # since there could be a different thermal sensor/controller being used on the board
+            try:
+                with open(path.replace('/device',''), "r") as f:
+                    board_temps.append(int(f.readline().rstrip("\n")))
             except FileNotFoundError:
                 print(f"Warning: Unable to open {path}; ignoring and continuing...")
                 continue
 
+
     # Did we get ANY temps?!?
     if len(board_temps) == 0:
         raise Exception(
@@ -99,6 +119,13 @@ def __set_fan_speed(speed: int):
         try:
             with open(fan, "w") as f:
                 f.write(str(speed))
+        except FileNotFoundError:
+            # If we are here, either it doesn't exist, OR, we need to change paths from 
+            # /sys/class/hwmon/hwmon0/device/pwm* to /sys/class/hwmon/hwmon0/pwm* since
+            # there could be a different thermal sensor/controller being used on the board
+            try:
+                with open(fan.replace('/device',''), "w") as f:
+                    f.write(str(speed))
             except FileNotFoundError:
                 print(
                     f"Error: Unable to write to PWM at {fan}! Why can't we set fan speed!?"

overlay/filesystem/usr/lib/systemd/system-shutdown/unifi-shutdown

@@ -1,17 +1,13 @@
 #!/bin/bash
 
-# turn off fans for shutdown
-if [ -d "/sys/class/hwmon/hwmon0/device" ]; then
-	for pwm in `ls /sys/class/hwmon/hwmon0/device/pwm[0-6]`; do
-		echo 0 > ${pwm}
-	done
-fi
-
 # Ensure all mounts in /srv from OMV are cleaned up
 for dir in `ls /srv | grep dev-disk`; do
 	umount -q /srv/${dir};
 done
 
+# Give it a sec...
+sleep 1
+
 # Now for all disks, delete from bus
 for dsk in sd{a..z}; do
 	if [ -d "/sys/block/${dsk}/device" ]; then
@@ -25,5 +21,18 @@ if [ -d "/sys/bus/platform/drivers/ui-hdd-pwrctl-v2" ]; then
 		echo ${bay} > "$(realpath /sys/bus/platform/drivers/ui-hdd-pwrctl-v2/*hdd_pwrctl-v2)/hdd_force_poweroff"
 	done
 fi
+
 # Let the disks spool down a sec...
 sleep 2
+
+# turn off fans for shutdown
+if [ -d "/sys/class/hwmon/hwmon0/device" ]; then
+	for pwm in `ls /sys/class/hwmon/hwmon0/device/pwm[0-6]`; do
+		echo 0 > "${pwm}"
+	done
+elif [ -f "/sys/class/hwmon/hwmon0/pwm1" ]; then
+	# Different hwmon devices may have this path instead
+	for pwm in `ls /sys/class/hwmon/hwmon0/pwm[0-6]`; do
+		echo 0 > "${pwm}"
+	done
+fi

scripts/vars.sh

@@ -7,10 +7,10 @@ build_path="${root_path}/BuildEnv"
 docker_tag=unvr-nas:builder
 
 # Expected UNVR Firmware(s) and hash(s)
-UNVR_firmware_filename="7f7c-UNVR-4.0.5-1d4b9c7d-926b-4ef4-88c6-23978c2455a8.bin"
-UNVR_firmware_md5="3bab9336619125e7fe6e4af7484a79dc"
-UNVRPRO_firmware_filename="b0a3-UNVRPRO-4.0.5-f221e29e-3405-4cb9-8d13-0f117d9cc3a1.bin"
-UNVRPRO_firmware_md5="f6aec555fa79c4e083168ec2aac4a71a"
+UNVR_firmware_filename="62f6-UNVR-4.0.6-19610d35-cd43-4844-ae5e-5420d6ff6279.bin"
+UNVR_firmware_md5="dc2e1693fe44aae8437f8ebcd8f0c6c1"
+UNVRPRO_firmware_filename="19bf-UNVRPRO-4.0.6-6dd303cb-cb6d-4904-a8ee-ef6e5353016d.bin"
+UNVRPRO_firmware_md5="84476cd12b90ab8c5344d4ff66211b1b"
 
 # Render our board out
 fwfnvar="${BOARD}_firmware_filename"

unifi-firmware/README.md

@@ -3,10 +3,10 @@
 Please place the UNVR/UNVR Pro firmware in this directory.
 
 * UNVR:
-  * Name: [7f7c-UNVR-4.0.5-1d4b9c7d-926b-4ef4-88c6-23978c2455a8.bin](https://community.ui.com/releases/UniFi-OS-Network-Video-Recorders-4-0-5/7c734ca2-72e2-4747-96a0-e3a376cf96aa)
-  * MD5Sum: 3bab9336619125e7fe6e4af7484a79dc
+  * Name: [62f6-UNVR-4.0.6-19610d35-cd43-4844-ae5e-5420d6ff6279.bin](https://community.ui.com/releases/UniFi-OS-Network-Video-Recorders-4-0-6/336c3537-cc1c-4049-891d-7d1bd205defd)
+  * MD5Sum: dc2e1693fe44aae8437f8ebcd8f0c6c1
 
 
 * UNVR Pro:
-  * Name: [b0a3-UNVRPRO-4.0.5-f221e29e-3405-4cb9-8d13-0f117d9cc3a1.bin](https://community.ui.com/releases/UniFi-OS-Network-Video-Recorders-4-0-5/7c734ca2-72e2-4747-96a0-e3a376cf96aa)
-  * MD5Sum: f6aec555fa79c4e083168ec2aac4a71a
+  * Name: [19bf-UNVRPRO-4.0.6-6dd303cb-cb6d-4904-a8ee-ef6e5353016d.bin](https://community.ui.com/releases/UniFi-OS-Network-Video-Recorders-4-0-6/336c3537-cc1c-4049-891d-7d1bd205defd)
+  * MD5Sum: 84476cd12b90ab8c5344d4ff66211b1b