A change in FreeBSD 13 now causes extremely long command names to
exit with errno set to E2BIG if the name can't fit in the list of
arguments. This was causing the regression tests for ENAMETOOLONG
to fail on FreeBSD 13 because the exit status for these errors
differ (ENAMETOOLONG uses status 127 while E2BIG uses status 126).
src/cmd/ksh93/tests/path.sh:
- To fix the failing regression tests, the command name has been
shortened to twice the length of NAME_MAX. This length is still
long enough to trigger an ENAMETOOLONG error without causing an
E2BIG failure on FreeBSD 13.
Fixes https://github.com/ksh93/ksh/issues/331
Stéphane Chazelas reported:
> As noted in this austin-group-l discussion[*] (relevant to this
> issue):
>
> $ ksh93u+m -c 'pwd; echo "$?" >&2; echo test; echo "$?" >&2' >&-
> 0
> 1
> /home/chazelas
>
> when stdout is closed, pwd does claim it succeeds (by returning a
> 0 exit status), while echo doesn't (not really relevant to the
> problem here, only to show it doesn't affect all builtins), and
> the output that pwd failed to write earlier ends up being written
> on stderr here instead of stdout upon exit (presumably) because
> of that >&2 redirection.
>
> strace shows ksh93 attempting write(1, "/home/chazelas\n", 15) 6
> times (1, the last one, successful).
>
> It gets even weirder when redirecting to a file:
>
> $ ksh93u+m -c 'pwd; echo "$?" >&2; echo test; echo "$?" > file' >&-
> 0
> $ cat file
> 1
> 1
> ome/chazelas
In my testing, the problem does not occur when closing stdout at
the start of the -c script itself (using redirect >&- or exec >&-);
it only occurs if stdout was closed before initialising the shell.
That made me suspect that the problem had to do with an
inconsistent file descriptor state in the shell. ksh uses internal
sh_open() and sh_close() functions, among others, to maintain that
state.
src/cmd/ksh93/sh/main.c: sh_main():
- If the shell is initialised with stdin, stdout or stderr closed,
then make the shell's file descriptor state tables reflect that
fact by calling sh_close() for the closed file descriptors.
This commit also improves the BUG_PUTIOERR fix from 93e15a30. Error
checking after sfsync() is not sufficient. For instance, on
FreeBSD, the following did not produce a non-zero exit status:
ksh -c 'echo hi' >/dev/full
even though this did:
ksh -c 'echo hi >/dev/full'
Reliable error checking requires not only checking the result of
every SFIO command that writes output, but also synching the buffer
at the end of the operation and checking the result of that.
src/cmd/ksh93/bltins/print.c:
- Make exitval variable global to allow functions called by
b_print() to set a nonzero exit status.
- Check the result of all SFIO output commands that write output.
- b_print(): Always sfsync() at the end, except if the s (history)
flag was given. This allows getting rid of the sfsync() call that
required the workaround introduced in 846ad932.
[*] https://www.mail-archive.com/austin-group-l@opengroup.org/msg08056.html
Resolves: https://github.com/ksh93/ksh/issues/314
Bug 1: POSIX requires numbers used as arguments for all the %d,
%u... in printf to be interpreted as in the C language, so
printf '%d\n' 010
should output 8 when the posix option is on. However, it outputs 10.
This bug was introduced as a side effect of a change introduced in
the 2012-02-07 version of ksh 93u+m, which caused the recognition
of leading-zero numbers as octal in arithmetic expressions to be
disabled outside ((...)) and $((...)). However, POSIX requires
leading-zero octal numbers to be recognised for printf, too.
The change in question introduced a sh.arith flag that is set while
we're processing a POSIX arithmetic expression, i.e., one that
recognises leading-zero octal numbers.
Bug 2: Said flag is not reset in a command substitution used within
an arithmetic expression. A command substitution should be a
completely new context, so the following should both output 10:
$ ksh -c 'integer x; x=010; echo $x'
10 # ok; it's outside ((…)) so octals are not recognised
$ ksh -c 'echo $(( $(integer x; x=010; echo $x) ))'
8 # bad; $(comsub) should create new non-((…)) context
src/cmd/ksh93/bltins/print.c: extend():
- For the u, d, i, o, x, and X conversion modifiers, set the POSIX
arithmetic context flag before calling sh_strnum() to convert the
argument. This fixes bug 1.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- When invoking a command substitution, save and unset the POSIX
arithmetic context flag. Restore it at the end. This fixes bug 2.
Reported-by: @stephane-chazelas
Resolves: https://github.com/ksh93/ksh/issues/326
ksh93 currently has three command substitution mechanisms:
- type 1: old-style backtick comsubs that use a pipe;
- type 3: $(modern) comsubs that use a temp file, currently with
fallback to a pipe if a temp file cannot be created;
- type 2: ${ shared-state; } comsubs; same as type 3, but shares
state with parent environment.
Type 1 is buggy. There are at least two reproducers that make it
hang. The Red Hat patch applied in 4ce486a7 fixed a hang in
backtick comsubs but reintroduced another hang that was fixed in
ksh 93v-. So far, no one has succeeded in making pipe-based comsubs
work properly.
But, modern (type 3) comsubs use temp files. How does it make any
sense to have two different command substitution mechanisms at the
execution level? The specified functionality between backtick and
modern command substitutions is exactly the same; the difference
*should* be purely syntactic.
So this commit removes the type 1 comsub code at the execution
level, treating them all like type 3 (or 2). As a result, the
related bugs vanish while the regression tests all pass.
The only side effect that I can find is that the behaviour of bug
https://github.com/ksh93/ksh/issues/124 changes for backtick
comsubs. But it's broken either way, so that's neutral.
So this commit can now be added to my growing list of ksh93 issues
fixed by simply removing code.
src/cmd/ksh93/sh/xec.c:
- Remove special code for type 1 comsubs from iousepipe(),
sh_iounpipe(), sh_exec() and _sh_fork().
src/cmd/ksh93/include/defs.h,
src/cmd/ksh93/sh/subshell.c:
- Remove pipe support from sh_subtmpfile(). This also removes the
use of a pipe as a fallback for $(modern) comsubs. Instead, panic
and error out if temp file creation fails. If the shell cannot
create a temporary file, there are fatal system problems anyway
and a script should not continue.
- No longer pass comsub type to sh_subtmpfile().
All other changes:
- Update sh_subtmpfile() calls.
src/cmd/ksh93/tests/subshell.sh:
- Add two regression tests based on reproducers from bug reports.
Resolves: https://github.com/ksh93/ksh/issues/305
Resolves: https://github.com/ksh93/ksh/issues/316
Bug: [[ ! ! 1 -eq 1 ]] returns false, but should return true.
This bug was reported for bash, but ksh has it too:
https://lists.gnu.org/archive/html/bug-bash/2021-06/msg00006.html
Op 24-05-21 om 17:47 schreef Chet Ramey:
> On 5/22/21 2:45 PM, Vincent Menegaux wrote:
>> Previously, these commands:
>>
>> [[ ! 1 -eq 1 ]]; echo $?
>> [[ ! ! 1 -eq 1 ]]; echo $?
>>
>> would both result in `1', since parsing `!' set CMD_INVERT_RETURN
>> instead of toggling it.
>
> Interestingly, ksh93 produces the same result as bash. I agree
> that it's more intuitive to toggle it.
Also interesting is that '!' as an argument to the simple
'test'/'[' command does work as expected (on both bash and ksh93):
'test ! ! 1 -eq 1' and '[ ! ! 1 -eq 1 ]' return 0/true.
Even the man page for [[ is identical for bash and ksh93:
| ! expression
| True if expression is false.
This suggests it's supposed to be a logical negation operator, i.e.
'!' is implicitly documented to negate another '!'. Bolsky & Korn's
1995 ksh book, p. 167, is slightly more explicit about it:
"! test-expression. Logical negation of test-expression."
I also note that multiple '!' negators in '[[' work as expected on
mksh, yash and zsh.
src/cmd/ksh93/sh/parse.c: test_primary():
- Fix bitwise logic for '!': xor the TNEGATE bit into tretyp
instead of or'ing it, which has the effect of toggling it.
The memory leak regression tests added in commit 05683ec7 only leak memory
in the C.UTF-8 locale if ksh is compiled with vmalloc. I've ran these
regression tests against ksh93v- and neither fail in that version of
ksh, which indicates the bug causing these tests to fail may be similar to
the one that causes <https://github.com/ksh93/ksh/issues/95>.
Since the memory leak tests work with -D_std_malloc, only set $LANG to
'C' if ksh is compiled with vmalloc enabled.
This regression also exists on ksh 93v- and ksh2020, from which it
was backported.
Reproducer:
$ (fn() { true; }; fn >/dev/null/ne; true) 2>/dev/null; echo $?
1
Expected output: 0 (as on ksh 93u+).
FreeBSD sh and NetBSD sh are the only other known shells that share
this behaviour. POSIX currently allows both behaviours, but may
require the ksh 93u+ behaviour in future. In any case, this causes
an incompatibility with established ksh behaviour that could easily
break existing ksh scripts.
src/cmd/ksh93/sh/xec.c: sh_exec():
- Commit 23f2e23 introduced a check for jmpval > SH_JMPIO (5).
When a function call pushes context for a redirection, this is
done with the jmpval exit value of SH_JMPCMD (6). Change that to
SH_JMPIO to avoid triggering that check.
src/cmd/ksh93/tests/exit.sh:
- Add regression tests for exit behaviour on various kinds of
shell errors as listed in the POSIX standard, including an error
in a redirection of a function call.
Fixes: https://github.com/ksh93/ksh/issues/310
After the last increase from 4 to 6 bytes, there are still
intermittent false leaks.sh failures (different ones on each run)
on the GitHub CI runner on the 1.0 branch, which is compiled with
the OS's malloc (as opposed to ast vmalloc). Increase the byte
tolerance for the leaks test from 6 to 8 bytes on Linux when
compiling with standard malloc.
src/cmd/ksh93/tests/{shtests,_common}:
- When xtrace is active, set SECONDS to the float type so that
the $SECONDS expansion in $PS4 shows fractional seconds.
src/cmd/ksh93/tests/*.sh:
- Various fixes to avoid command substitutions incorporating xtrace
output into their results. Sometimes this is done by avoiding a
preceding assignment on a command that redirects 2>&1 (as that
will also redirect the preceding assignment and its xtrace,
causing the command substitution to capture the xtrace); other
times it was easiest to just turn off xtrace outright within the
command substitution.
src/cmd/ksh93/tests/math.sh:
- Remove an obsolete 'fixme' note.
There are intermittent false failures on the GitHub CI runners on
the 1.0 branch, which is compiled with the OS's malloc (as opposed
to ast vmalloc). Increase the byte tolerance for the leaks test
from 4 to 6 bytes on Linux when compiling with standard malloc.
Since a command substitution no longer forks on non-permanently
redirecting standard output within it for a specific command,
test -t 1, [ -t 1 ], and [[ -t 1 ]] broke as follows:
v=$(test -t 1 >/dev/tty && echo ok) did not assign 'ok' to v.
This is because the assumption in tty_check() that standard output
is never on a terminal in a non-forked command substitution, added
in 55f0f8ce, was made invalid by 090b65e7.
src/cmd/ksh93/edit/edit.c: tty_check():
- Implement a new method. Return false if the file descriptor
stream is of type SF_STRING, which is the case for non-forked
command substitutions -- it means the sfio stream writes directly
into a memory area. This can be checked with the sfset(3)
function (see src/lib/libast/man/sfio.3). To avoid a segfault
when accessing sh.sftable, we need to validate the FD first.
src/cmd/ksh93/tests/pty.sh:
- Add the above reproducer.
The build started failing on Solaris Studio cc when 'noreturn' was
introduced, because the wrappers pass the -xc99 flag which sets the
compiler to C99 mode. 'noreturn' is a C11 feature. The
stdnoreturn.h header was correctly included but the compiler still
threw a syntax error (long path abbreviated below):
".../stk.c", line 124: warning: _Noreturn is a keyword in ISO C11
".../stk.c", line 124: warning: old-style declaration or incorrect
type for: _Noreturn
".../stk.c", line 124: syntax error before or at: static
src/cmd/INIT/cc.sol11.*:
- Pass -std=c11 to cc instead of -xc99. At least on i386-64, this
is sufficient to fix the build.
README.md, src/cmd/ksh93/README.md:
- Remove -xc99 from the Solaris build flags example as that is
incompatible with -std=c11 (and was already redundant with the
-xc99 in the wrappers).
src/cmd/ksh93/tests/basic.sh:
- Don't run a newly backported 93v- regression test on Solaris
because it uses the 'join' command with process subsitutions;
Solaris 11.4's join(1) hangs when trying to read from /dev/fd.
This is not ksh's fault. (re: 59bacfd4)
On Fedora, this regression test failure occurs:
locale.sh[84]: 'read' doesn't skip multibyte input
correctly (ja_JP.ujis, \x95\x5c)
This is a problem with the test; this Shift-JIS specific test
should not be run in a non-Shift-JIS locale. So this commit skips
it unless the locale string ends in '.SJIS' (case insensitive).
It also adds cleanup for the 'chr' variable's special attributes
in case that name is ever going to be used in another test.
src/cmd/ksh93/data/math.tab:
- Added exp10().
- Remove int() as being an alias to floor().
- Created entries for local float() and local int() which are
defined in features/math.sh.
src/cmd/ksh93/features/math.sh:
- Backport floor() and int() related code from ksh93v-.
src/cmd/ksh93/sh.1:
- Sync man page to math.tab's potential functions.
src/cmd/ksh93/tests/builtins.sh:
- An original AT&T test for 'read -s' was disabled and marked
FIXME. Fix the invalid invocation and check that 'read -s'
actually writes to the history file.
- Remove a temporary 'command -p ls' debug test that I accidentally
committed (re: a197b042).
I did not realize that lvalue->nosub and lvalue->sub variables are
not reset when another assignment occurs later down the line.
Example: (( arr[0][1]+=1, arr[2]=7 ))
src/cmd/ksh93/sh/arith.c: arith():
- For assignment operations, reset lvalue's nosub and sub variables
so the target for the next assignment is not redirected.
src/cmd/ksh93/tests/arrays2.sh:
- Add in a few regression tests that utilize compound arithmetic
expressions having at least an assignment operation (+=) followed
by a normal assignment (=).
BUG 1: Though 'command' is specified/documented as a regular
builtin, preceding assignments survive the invocation (as with
special or declaration builtins) if 'command' has no command
arguments in these cases:
$ foo=wrong1 command; echo $foo
wrong1
$ foo=wrong2 command -p; echo $foo
wrong2
$ foo=wrong3 command -x; echo $foo
wrong3
Analysis: sh_exec(), case TCOM (simple command), contains the
following loop that skips over 'command' prefixes, preparsing any
options and remembering the offset in the 'command' variable:
src/cmd/ksh93/sh/xec.c
1059 while(np==SYSCOMMAND || !np && com0
&& nv_search(com0,shp->fun_tree,0)==SYSCOMMAND)
1060 {
1061 register int n = b_command(0,com,&shp->bltindata);
1062 if(n==0)
1063 break;
1064 command += n;
1065 np = 0;
1066 if(!(com0= *(com+=n)))
1067 break;
1068 np = nv_bfsearch(com0, shp->bltin_tree, &nq, &cp);
1069 }
This skipping is not done if the preliminary b_command() call on
line 1061 (with argc==0) returns zero. This is currently the case
for command -v/-V, so that 'command' is treated as a plain and
regular builtin for those options.
The cause of the bug is that this skipping is even done if
'command' has no arguments. So something like 'foo=bar command' is
treated as simply 'foo=bar', which of course survives.
So the fix is for b_command() to return zero if there are no
arguments. Then b_command() itself needs changing to not error out
on the second/main b_command() call if there are no arguments.
src/cmd/ksh93/bltins/whence.c: b_command():
- When called with argc==0, return a zero offset not just for -v
(X_FLAG) or -V (V_FLAG), but also if there are no arguments left
(!*argv) after parsing options.
- When called with argc>0, do not issue a usage error if there are
no arguments, but instead return status 0 (or, if -v/-V was given,
status 2 which was the status of the previous usage message).
This way, 'command -v $emptyvar' now also works as you'd expect.
BUG 2: 'command -p' sometimes failed after executing certain loops.
src/cmd/ksh93/sh/path.c: defpath_init():
- astconf() returns a pointer to memory that may be overwritten
later, so duplicate the string returned. Backported from ksh2020.
(re: f485fe0f, aa4669ad, <https://github.com/att/ast/issues/959>)
src/cmd/ksh93/tests/builtins.sh:
- Update the test for BUG_CMDSPASGN to check every variant of
'command' (all options and none; invoking/querying all kinds of
command and none) with a preceding assignment. (re: fae8862c)
This also covers bug 2 as 'command -p' was failing on macOS prior
to the fix due to a loop executed earlier in another test.
@JohnoKing writes:
> In emacs mode, using Alt+D or Alt+H with a repeat parameter
> results in the deletion of extra characters. Reproducer:
>
> $ set -o emacs
> $ foo bar delete add # <Ctrl+A> <ESC+3+Alt+D>
> $ d # Should be ' add'
>
> $ foo bar delete add # <ESC+3+Alt+H>
> $ f # Should be 'foo '
>
> [...] this bug also affects the Delete and Arrow keys [...].
> Reproducer:
>
> $ test_string <Ctrl+A> <ESC+3+Delete>
> # This will delete all of 'test', which is four characters
> $ test_string <Ctrl+A> <ESC+4+Right Arrow>
> # This should move the cursor to '_', not 's'
src/cmd/ksh93/edit/emacs.c: ed_emacsread():
- Revert part of 29b11bba: once again set 'count' to
'vt220_save_repeat' instead of adding the value.
- do_escape: If the escape() function (which handles both ESC
repeat counts and commands like ESC d and ESC h) returns a repeat
count, do not use the saved repeat count for v220 sequences.
src/cmd/ksh93/tests/pty.sh:
- Test the four reproducers above.
Fixes: https://github.com/ksh93/ksh/issues/292
This PR corrects #168 for indexed arrays having more than one
level. Turns out ksh was only keeping track of the subscript number
for assignment in lvalue's nosub variable. By saving the actual
subscript reference, the result can be assigned to its proper
destination instead of putting the result into the last looked
value or subscript location.
src/cmd/ksh93/include/streval.h: struct lval:
- Create a new pointer named sub to hold the reference that nosub
describes.
src/cmd/ksh93/sh/arith.c: arith():
- Adjust LOOKUP: for lvalue ARITH_ASSIGNOP operations on indexed
arrays to save the np of the destination subscript for later use.
- Adjust ASSIGN: to act when lvalue's nosub > 0 which happens as
the last step in the arithmetic parsing loop for assignment
operations. Only indexed arrays will have a nosub value > 0. All
others have a nosub of 0 unless they are involved in a unary
operation (++, --) which sets nosub to -1. All said in the
context of assignment operations like (( arr[0][1] += 1 )).
src/cmd/ksh93/sh/streval.c:
- Initialize the new sub pointer to 0.
src/cmd/ksh93/tests/arrays2.sh:
- Created a few multidimensional indexed array tests for assignment
operations like += as an example.
Resolves: https://github.com/ksh93/ksh/issues/168
Following the resolution of Austin Group bug 1393[*] that is set to
be included in the next version of the POSIX standard, the
'command' prefix in POSIX mode (set -o posix) no longer disables
the declaration properties of declaration built-ins.
[*] https://austingroupbugs.net/view.php?id=1393
src/cmd/ksh93/sh/parse.c: lex():
- Skip the 'command' prefix even in POSIX mode so that any
declaration commands prefixed by it are treated as such in xec.c
(sh_exec()).
src/cmd/ksh93/sh/xec.c: sh_exec():
- The foregoing change reintroduced a variant of BUG_CMDSPEXIT: the
shell exits on something like 'command export readonlyvar=foo'.
This now fixes that bug for both POSIX and non-POSIX mode. When
calling nv_setlist() to process true shell assignments, and there
is a 'command' prefix, push a shell context and use sigsetjmp to
intercept any errors in assignments and stop the shell exiting.
src/cmd/ksh93/tests/builtins.sh:
- Borrow the BUG_CMDSPEXIT regression test from modernish and adapt
it for ksh. (I'm the author so yes, I can do this.) Original:
ae8fe9c3/lib/modernish/tst/builtin.t (L80-L109)
Tab completion in emacs and vi wrongly parses and executes command
substitutions. Example reproducers:
$ $(~)<Tab> # Result:
$ $(~)ksh[1]: /home/johno: cannot execute [Is a directory]
$ $(~ksh)<Tab> # Result:
$ $(~ksh)ksh: /home/johno/GitRepos/KornShell/ksh: cannot execute [Is a directory]
$ $(echo true)<Tab> # Result:
$ /usr/bin/true # or just 'true' -- it's unpredictable
In addition, backtick command substitutions had the following bug:
$ `echo hi`<Tab> # Result:
$ `echo hi`ksh: line 1: BUG_BRACQUOT_test.sh: not found
(where BUG_BRACQUOT_test.sh happens to be lexically the
first-listed file in my ksh development working directory).
There's also a crash associated with this due to an access beyond
buffer boundaries, which is only triggered on some systems (macOS
included).
src/cmd/ksh93/edit/completion.c:
- find_begin():
* When finding the beginning of a command substitution and the
last character is ')', do not increase the character pointer
cp. Increasing it caused the condition 'if(c && c==endchar)' in
the 'default:' block to be true, causing 'return(xp);' to be
executed, which returns a pointer the beginning of the command
substitution to ed_expand() on line 290, so that ed_expand()
eventually executes the command substitution with the
sh_argbuild() call on line 349. After deleting this 'else
cp++', that statement 'if(c && c==endchar) return(xp);' is not
executed and `find_begin()` returns the null pointer, which
avoids anything being executed. Thanks to @JohnoKing:
https://github.com/ksh93/ksh/issues/268#issuecomment-817249164
* Add code for properly skipping over backtick-style command
substitutions, based on the $( ) code.
- ed_expand(): Avoid out[-1] reading one byte to the left of
outbuff by first checking that out>outbuff. Thanks to @JohnoKing
for using ASan to find the location of the crash:
https://github.com/ksh93/ksh/issues/268#issuecomment-825574885
src/cmd/ksh93/tests/pty.sh:
- Test for the bugs detailed above.
Resolves: https://github.com/ksh93/ksh/issues/268
On slower systems it could fail with an arithmetic syntax error
because the output was verified before it had been written.
Also make another test xtrace-proof.
This applies when ksh is compiled with standard malloc.
Apparently, 1024 iterations is not enough on Gentoo Linux i386, at
least not when running the full test suite. The leak tests fail
intermittently and different tests fail each time, but always with
a leak of exactly 36864 bytes for each failing test. So those
failures are clearly spurious. Doubling the number of iterations
seems to make them go away.
src/cmd/ksh93/tests/{basic.sh,builtins.sh,shtests}:
- Redirect error output from the ulimit builtin to silence irrelevant
errors in the regression tests (these errors may occur when a
command such as 'ulimit -t 4' is run before the regression tests).
- Shellquote the error messages from the getconf regression tests.
src/cmd/ksh93/tests/{arrays,io,variables}.sh:
- Backport the ksh2020 regression tests for the following bugs:
https://github.com/att/ast/issues/23https://github.com/att/ast/issues/203https://github.com/att/ast/issues/472https://github.com/att/ast/issues/492
- Minor fix to POSIX mode regression tests in ksh93v-. In ksh93v-,
[[ -o ?posix ]] doesn't return an error (because it's implemented
in the bash mode). However, 'set -o posix' will fail in ksh93v-
if it's not in bash compatibility mode, which causes this test
script to exit prematurely.
src/cmd/ksh93/tests/{basic,pty}.sh:
- Add test for https://github.com/att/ast/issues/1461
- The ksh2020 fix for [ -t 1 ] in non-forking command substitutions
caused the following bug in interactive shells:
$ ( [ -t 1 ]; echo $? )
1 # Always fails
To avoid introducing this bug, this commit adds a regression
test for it.
src/cmd/ksh93/tests/functions.sh:
- Add test for https://github.com/att/ast/issues/1160
Put the test to the start of functions.sh (if it's at the end
of the script, it refuses to fail under ksh2020). Output from
this regression test when run against ksh2020:
functions.sh[46]: eval'ing function dumps function body to
stdout (got $' { eval "bar() { FAILURE; }"; }\n { FAILURE; }')
This fixes the following:
1. Using $RANDOM in a virtual/non-forked subshell no longer
influences the reproducible $RANDOM sequence in the parent
environment.
2. When invoking a subshell $RANDOM is now re-seeded (as mksh and
bash do) so that invocations in repeated subshells (including
forked subshells) longer produce identical sequences by default.
3. Program flow corruption that occurred in scripts on executing
( ( simple_command & ) ).
src/cmd/ksh93/include/variables.h:
- Move 'struct rand' here as it will be needed in subshell.c. Add
rand_seed member to save the pseudorandom generator seed. Remove
the pointer to the shell state as it's redundant.
src/cmd/ksh93/sh/init.c:
- put_rand(): Store given seed in rand_seed while calling srand().
No longer pointlessly limit the number of possible seeds with the
RANDMASK bitmask (that mask is to limit the values to 0-32767,
it should not limit the number of possible sequences to 32768).
- nget_rand(): Instead of using rand(), use rand_r() to update the
random_seed value. This makes it possible to save/restore the
current seed of the pseudorandom generator.
- Add sh_reseed_rand() function that reseeds the pseudorandom
generator by calling srand() with a bitwise-xor combination of
the current PID, the current time with a granularity of 1/10000
seconds, and a sequence number that is increased on each
invocation.
- nv_init(): Set the initial seed using sh_reseed_rand() here
instead of in sh_main(), as this is where the other struct rand
members are initialised.
src/cmd/ksh93/sh/main.c: sh_main():
- Remove the srand() call that was replaced by the sh_reseed_rand()
call in init.c.
src/cmd/ksh93/sh/subshell.c: sh_subshell():
- Upon entering a virtual subshell, save the current $RANDOM seed
and state, then reseed $RANDOM for the subshell.
- Upon exiting a virtual subshell, restore $RANDOM seed and state
and reseed the generator using srand() with the restored seed.
src/cmd/ksh93/sh/xec.c: sh_exec():
- When optimizing out a subshell that is the last command, still
act like a subshell: reseed $RANDOM and increase ${.sh.subshell}.
- Fix a separate bug discovered while implementing this. Do not
optimize '( simple_command & )' when in a virtual subshell; doing
this causes program flow corruption.
- When optimizing '( simple_command & )', also reseed $RANDOM and
increment ${.sh.subshell}.
src/cmd/ksh93/tests/subshell.sh,
src/cmd/ksh93/tests/variables.sh:
- Add various tests for all of the above.
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Resolves: https://github.com/ksh93/ksh/issues/285
The following problems remained:
$ var=x; echo ${var:-'{}'}
x}
$ var=; echo ${var:+'{}'}
}
src/cmd/ksh93/sh/macro.c: varsub():
- Use the new ST_MOD1 state table to skip over ${var-'foo'}, etc.
instead of ST_QUOTE. In ST_MOD1 the ' is categorised as S_LIT
which causes the single quotes to be skipped over correctly.
See d087b031 for more info.
src/cmd/ksh93/tests/quoting2.sh:
- Add tests for this remaining bug.
- Make the new test xtrace-proof.
Resolves: https://github.com/ksh93/ksh/issues/290 (again)
src/cmd/ksh93/{bltins/typeset,sh/name,sh/nvtree,sh/nvtype}.c:
- Replace more instances of memcmp with strncmp to fix
heap-buffer-overflow errors when running the regression tests
with ASan enabled.
src/cmd/ksh93/edit/vi.c:
- Fix an invalid dereference of the 'p' pointer to fix a crash in
vi mode when entering a comment in the command history. This
bugfix was backported from ksh2020:
https://github.com/att/ast/issues/798
src/cmd/ksh93/tests/pty.sh:
- Add a regression test for the vi mode crash.
The code contains various checks to see if a subshell needs to
fork, like this one in the ulimit builtin:
if(shp->subshell && !shp->subshare)
sh_subfork();
All checks of this form are fatally broken, as each one of them
causes shared-state command substitutions to ignore parent virtual
subshells.
Currently the only feasible way to fix this is to fork a virtual
subshell before executing a shared-state command substitution in
it. In the long term I think shared-state command substitutions
should probably be redesigned to disassociate them completely from
the virtual subshell mechanism.
src/cmd/ksh93/sh/macro.c: comsubst():
- If we're in a non-subshare virtual subshell, fork it before
entering a type 2 (subshare) command substitution.
src/cmd/ksh93/sh/subshell.c:
- sh_assignok(): Remove subshare fix from 911d6b06 as it's
redundant now that the parent of a subshare is never a virtual
subshell. Go back to not doing anything if the current "subshell"
is a subshare.
- sh_subtracktree(), sh_subfuntree(): Similarly, remove the
now-redundant subshare fixes from 13c57e4b.
src/cmd/ksh93/sh/xec.c: sh_exec():
- Fix a separate bug: only fork a virtual subshell before running a
background job if that "subshell" is not a subshare.
src/cmd/ksh93/tests/subshell.sh:
- Add test for bug fixed in xec.c.
- Add tests for 'ulimit', 'builtin' and 'exec' run in subshare
within subshell -- all commands that use checks of the form
'if(sh.subshell && !sh.subshare) sh_subfork();'.
Resolves: https://github.com/ksh93/ksh/issues/289
This avoids splitting on quoted whitespace when extracting words
from the command history using the emacs M-. or vi _ command.
Example: if the prior command is
$ ls Stairway\ To\ Heaven.mp3
then, M-. in Emacs editing mode (and _ in vi mode) now inserts
Stairway\ To\ Heaven.mp3 instead of Heaven.mp3. The behavior is
similar for 'Stairway To Heaven.mp3' and "Stairway To Heaven.mp3".
src/cmd/ksh93/edit/history.c: hist_word():
- Skip over single-quoted and double-quoted strings and
backslash-escaped characters.
src/cmd/ksh93/tests/pty.sh:
- Add regression test for this feature in vi mode. Since emacs and
vi both use the same code for this, that should be good enough.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
The referenced commit introduced the following bug:
> The closing quote does not appear to be registering during the
> parse of the following:
>
> echo ${var:+'{}'}
>
> Within a script, this will result in:
>
> syntax error at line 1: `'' unmatched
src/cmd/ksh93/data/lexstates.c,
src/cmd/ksh93/include/lexstates.h:
- Add new ST_MOD1 state table that is a copy of ST_QUOTE, but adds
a special meaning (ST_LIT) for the single quote (position 39).
src/cmd/ksh93/sh/lex.c: sh_lex():
- For parameter expansion operators with old-style quoting
(S_MOD1), use the new ST_MOD1 state table instead of ST_QUOTE.
This causes single quotes within them to be processed properly.
src/cmd/ksh93/tests/quoting2.sh:
- Add tests.
Thanks to @gkamat for the bug report.
Resolves: https://github.com/ksh93/ksh/issues/290
Previously, command substitutions executed as virtual subshells
were always forked if any command was run within them that
redireceted standard output, even if the redirection was local to
that command.
Commit 500757d7 removed the check for a shared-state command
substitution (subshare), so introduced a bug where even that would
fork, causing it to stop sharing its state.
We can further improve on that fix by only forking if the
redirection is permanent as with `exec` or `redirect`. There should
be no need to do that if the redirection is local to a command run
within the command substitution, as the file descriptor is restored
when that command finishes, which is still within the command
substitution.
src/cmd/ksh93/sh/io.c: sh_redirect():
- Only fork upon redirecting stdout if the virtual subshell is a
command substitution, and if the redirection is permanent
(flag==1 or flag==2).
src/cmd/ksh93/bltins/whence.c:
- The previous commit that fixed 'unset -f' in virtual subshells left
one bug. The type builtin (or 'whence -v') could still find the unset
function in virtual subshells:
$ foo() { echo foo; }
$ (unset -f foo; type foo)
foo is an undefined function
To fix this bug, avoid detecting functions in the whence builtin
unless they have the NV_FUNCTION flag.
src/cmd/ksh93/tests/subshell.sh:
- Add a regression test for using 'type' on a function unset inside of
a virtual subshell.
A bug introduced in the previous commit caused 'unset -f' in a
subshell of a subshell to fail to unset a function created in a
parent subshell. Reproducer:
$ ( f2() { echo WRONG; }; ( unset -f f2; f2 ) )
WRONG
src/cmd/ksh93/bltins/typeset.c: unall():
- Do not nv_search() in sh.fun_base before setting the dummy node
that marks the function as unset in this subshell. That search
only reaches the base tree and not any of its subtrees. Setting
the dummy unconditionally is not harmful; the cost is negligible.
src/cmd/ksh93/tests/subshell.sh:
- Add test for the bug.
This commit implements unsetting functions in virtual subshells,
removing the need for the forking workaround. This is done by
either invalidating the function found in the current subshell
function tree by unsetting its NV_FUNCTION attribute bits (which
will cause sh_exec() to skip it) or, if the function exists in a
parent shell, by creating an empty dummy subshell node in the
current function tree without that attribute.
As a beneficial side effect, it seems that bug 228 (unset -f fails
in forked subshells if a function is defined before forking) is now
also fixed.
src/cmd/ksh93/include/defs.h,
src/cmd/ksh93/sh/init.c:
- Add sh.fun_base for a saved pointer to the main shell's function
tree for checking when in a subshell, analogous to sh.var_base.
src/cmd/ksh93/bltins/typeset.c: unall():
- Remove the fork workaround.
- When unsetting a function found in the current function tree
(troot) and that tree is not sh.var_base (which checks if we're
in a virtual subshell in a way that handles shared-state command
substitutions correctly), then do not delete the function but
invalidate it by unsetting its NV_FUNCTION attribute bits.
- When unsetting a function not found in the current function tree,
search for it in sh.fun_base and if found, add an empty dummy
node to mask the parent shell environment's function. The dummy
node will not have NV_FUNCTION set, so sh_exec() will skip it.
src/cmd/ksh93/sh/subshell.c:
- sh_subfuntree(): For 'unset -f' to work correctly with
shared-state command substitutions (subshares), this function
needs a fix similar to the one applied to sh_assignok() for
variables in commit 911d6b06. Walk up on the subshells tree until
we find a non-subshare.
- sh_subtracktree(): Apply the same fix for the hash table.
- Remove table_unset() and incorporate an updated version of its
code in sh_subshell(). As of ec888867, this function was only
used to clean up the subshell function table as the alias table
no longer exists.
- sh_subshell():
* Simplify the loop to free the subshell hash table.
* Add table_unset() code, slightly refactored for readability.
Treat dummy nodes now created by unall() separately to avoid a
memory leak; they must be nv_delete()d without passing the
NV_FUNCTION bits. For non-dummy nodes, turn on the NV_FUNCTION
attribute in case they were invalidated by unall(); this is
needed for _nv_unset() to free the function definition.
src/cmd/ksh93/tests/subshell.sh:
- Update the test for multiple levels of subshell functions to test
a subshare as well. While we're add it, add a very similar test
for multiple levels of subshell variables that was missing.
- Add @JohnoKing's reproducer from #228.
src/cmd/ksh93/tests/leaks.sh:
- Add leak tests for unsetting functions in a virtual subshell.
Test both the simple unset case (unall() creates a dummy node)
and the define/unset case (unall() invalidates existing node).
Resolves: https://github.com/ksh93/ksh/issues/228
Noteworthy changes:
- The man pages have been updated to fix a ton of instances of
runaway underlining (this was done with `sed -i 's/\\f5/\\f3/g'`
commands). This commit dramatically increased in size because
of this change.
- The documentation for spawnveg(3) has been extended with
information about its usage of posix_spawn(3) and vfork(2).
- The documentation for tmfmt(3) has been updated with the changes
previously made to the man pages for the printf and date builtins
(though the latter builtin is disabled by default).
- The shell's tracked alias tree (hash table) is now documented in
the shell(3) man page.
- Removed the commented out regression test for an ERRNO variable
as the COMPATIBILITY file states it was removed in ksh93.
There is a TODO note in variables.sh that notes the value of LINENO
is wrong after a virtual subshell. The following script should
print '6', but the bug causes it to print '1' instead:
$ cat /tmp/lineno
#!/bin/ksh
(
unset LINENO
:
)
echo $LINENO
This bug started to occur after the bugfix applied in 7b994b6a.
However, that commit is not where the cause of bug was (when that
bugfix is applied to ksh versions 2008-07-25 through 2012-01-01,
$LINENO works fine). Rather, the cause of this bug was introduced
in 93u+ 2012-02-29. In that version, the mp->nvfun pointer was only
copied from np->nvfun if the variable can be freed from memory.
This is what caused 7b994b6a to break $LINENO in subshells, so to
fix this bug the mp->nvfun and np->nvfun must point to the same
object, even when the variable isn't freed from memory.
src/cmd/ksh93/sh/subshell.c: nv_restore():
- Always copy the np->nvfun pointer to mp->nvfun. To prevent
crashes, the value of np->nvfun->nofree is set to the value given
by the nofree variable, which is set before _nv_unset. See also
commit 7e7f1372, which fixed a crash that happened because
_nv_unset discards the NV_NOFREE flag.
src/cmd/ksh93/tests/variables.sh:
- Remove the workaround for LINENO after a virtual subshell.
- Add a regression test for the value of LINENO when unset in a
virtual subshell, then used after the subshell. Note that before
commit 997ad43b LINENO's value was corrupted after being unset in
a subshell, so the test checks for corruption of the LINENO
variable (in prior commits LINENO was set to '49' because of the
previous bug).
The commands within a process substitution used as an argument to a
redirection (e.g. < <(...) or > >(...)) are simply not included in
parse trees dumped by shcomp. This can be verified with a command
like hexdump -C. As a result, these process substitutions do not
work when running a bytecode-compiled shell script.
The fix is surprisingly simple. A process substitution is encoded
as a complete parse tree. When used with a redirection, that parse
tree is used as the file name for the redirection. All we need to
do is treat the "file name" as a parse tree instead of a string if
flags indicate a process substitution.
A process substitution is detected by the struct ionod field
'iofile'. Checking the IOPROCSUB bit flag is not enough. We also
need to exclude the IOLSEEK flag as that form of redirection may
use the IOARITH flag which has the same bit value as IOPROCSUB (see
include/shnodes.h).
src/cmd/ksh93/sh/tdump.c: p_redirect():
- Call p_tree() instead of p_string() for a process substitution.
src/cmd/ksh93/sh/trestore.c: r_redirect():
- Call r_tree() instead of r_string() for a process substitution.
src/cmd/ksh93/include/version.h:
- Bump the shcomp binary header version as this change is not
backwards compatible; previous trestore.c versions don't know how
to read the newly compiled process substitutions and would crash.
src/cmd/ksh93/tests/io.sh:
- Add test.
src/cmd/ksh93/tests/builtins.sh,
src/cmd/ksh93/tests/options.sh:
- Revert shcomp workarounds. (re: 6701bb30)
Resolves: https://github.com/ksh93/ksh/issues/165
Johnothan King writes:
> There are two regressions related to how ksh handles syntax
> errors in the .kshrc file. If ~/.kshrc or the file pointed to by
> $ENV have a syntax error, ksh exits during startup. Additionally,
> the error message printed is incorrect:
>
> $ cat /tmp/synerror
> ((
> echo foo
>
> # ksh93u+m
> $ ENV=/tmp/synerror arch/*/bin/ksh -ic 'echo ${.sh.version}'
> /tmp/synerror: syntax error: `/t/tmp/synerror' unmatched
>
> # ksh93u+
> $ ENV=/tmp/synerror ksh93u -ic 'echo ${.sh.version}'
> /tmp/synerror: syntax error: `(' unmatched
> Version AJM 93u+ 2012-08-01
>
> The regression that causes the incorrect error message was
> introduced by commit cb67a01. The other bug that causes ksh to
> exit on startup was introduced by commit ceb77b1.
src/cmd/ksh93/sh/lex.c: fmttoken():
- Call stakfreeze(0) to terminate a possible unterminated previous
stack item before writing the token string onto the stack. This
fixes the bug with garbage in a syntax error message.
src/cmd/ksh93/sh/main.c: exfile():
- Revert Red Hat's ksh-20140801-diskfull.patch applied in ceb77b13.
This fixes the bug with interactive ksh exiting on syntax error
in a profile script. Testing by @JohnoKing showed the patch is no
longer necessary to fix a login crash on disk full, as commit
970069a6 (which applied Red Hat patches ksh-20120801-macro.patch
and ksh-20120801-fd2lost.patch) also fixes that crash.
src/cmd/ksh93/README:
- Fix typos. (re: fdc08b23)
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Resolves: https://github.com/ksh93/ksh/issues/281
This commit fixes three problems with getconf pathbound builtin:
1. The -l/--lowercase option did not change all variable names to
lower case.
2. The -q/--quote option now quotes all string values. Previously,
it only quoted string values that had a space or other
non-shellsafe character.
3. The -c/--call, -n/--name and -s/--standard options matched all
variable names provided by 'getconf -a', even if none were
actual matches.
Additionally, references to the confstr and sysconf functions have
been updated to reference section 3 of the man pages instead of
section 2.
src/lib/libast/port/astconf.c:
- Previously, only values that had spaces in them were quoted. Change
that behavior to quote all string values by using the FMT_ALWAYS
flag. Bug report: https://github.com/att/ast/issues/1173
- Not all variable names were printed in lowercase by 'getconf -l'.
Fix it by adding a few missing instances of fmtlower.
Bug report: https://github.com/att/ast/issues/1171
- Add the missing code to the '#if _pth_getconf_a' block to handle
-c/-n/-s while parsing the OS's native 'getconf -a' output. This
approach reuses code for name matching from other parts of
astconflist(). Resolves: https://github.com/ksh93/ksh/issues/279
src/lib/libcmd/getconf.c:
- Update the documentation to note the -q flag only quotes strings.
src/cmd/ksh93/tests/bulitins.sh:
- Add regression tests for the getconf bugs fixed in this commit.
Co-authored-by: Martijn Dekker <martijn@inlv.org>
This commit fixes what are hopefully the two final aspects of #153:
1. If the present working directory does not exist (was moved or
deleted) upon entering a virtual subshell, no PWD directory path
is saved. Since restoring the state after exiting a virtual
subshell is contingent on a previous PWD path existing, this
resulted in entire aspects of the virtual subshell, such as the
subshell function tree, not being cleaned up.
2. A separate problem is that 'cd ..' does not update PWD or OLDPWD
when run from a nonexistent directory.
A reproducer exposing both problems is:
$ mkdir test
$ cd test
$ ksh -c '(subfn() { BAD; }; cd ..; echo subPWD==$PWD);
typeset -f subfn; echo mainPWD==$PWD'
subPWD==/usr/local/src/ksh93/ksh/test
subfn() { BAD; };mainPWD==/usr/local/src/ksh93/ksh/test
Expected output:
subPWD==/usr/local/src/ksh93/ksh
mainPWD==/usr/local/src/ksh93/ksh/test
src/cmd/ksh93/bltins/cd_pwd.c:
- If path_pwd() fails to get the PWD (usually it no longer exists),
don't set $OLDPWD to '.' as that is pointless; use $PWD instead.
After cd'ing from a nonexistent directory, 'cd -' *should* fail
and should not be equivalent to 'cd .'.
- Remove a redundant check for (!oldpwd) where it is always set.
- Do not prematurely return without setting PWD or OLDPWD if
pathcanon() fails to canonicalise a nonexistent directory.
Instead, fall back to setting PWD to the result of getcwd(3).
src/cmd/ksh93/sh/subshell.c:
- Minor stylistic adjustment. Some NULL macros sneaked in. This
historic code base does not use them (yet); change to NIL(type*).
- sh_subshell(): Fix logic for determining whether to save/restore
subshell state.
1. When saving, 'if(!comsub || !shp->subshare)' is redundant;
'if(!shp->subshare)' should be enough. If we're not in a
subshare, state should be saved.
2. When restoring, 'if(sp->shpwd)' is just nonsense as there is
no guarantee that the PWD exists upon entering a subshell.
Simply use the same 'if(!shp->subshare)'. Add an extra check
for sp->pwd to avoid a possible segfault. Always restore the
PWD on subshell exit and not only if shp->pwd is set.
- sh_subshell(): Issue fatal errors in libast's "panic" format.
src/cmd/ksh93/tests/builtins.sh:
- Adjust a relevant test to run err_exit() outside of the subshell
so that any error is counted in the main shell.
- Add test for problem 2 described at the top.
src/cmd/ksh93/tests/subshell.sh:
- Add test for problems 1 and 2 based on reproducer above.
Resolves: https://github.com/ksh93/ksh/issues/153
Accessing t->tre.treio for every sh_exec() run is invalid because
't' is of type Shnode_t, which is a union that can contain many
different kinds of structs. As all members of a union occupy the
same address space, only one can be used at a time. Which member is
valid to access depends on the node type sh_exec() was called with.
The invalid access triggered a crash on 32-bit systems when
executing an arithmetic command like ((x=1)).
The t->tre.treio union member should be accessed for a simple
command (case TCOM in sh_exec()). The fix is also needed for
redirections attached to blocks (case TSETIO) in which case the
union member to use is t->fork.forkio.
src/cmd/ksh93/sh/xec.c:
- Add check_exec_optimization() function that checks for all the
conditions where the exec optimisation should not be done. For
redirections we need to loop through the whole list to check for
an IOREWRITE (<>;) one.
- sh_exec(): case TCOM (simple command): Only bother to call
check_exec_optimization() if there are either command arguments
or redirections (IOW: don't bother for bare variable
assignments), so move it to within the if(io||argn) block.
- sh_exec(): case TSETIO: This needs a similar fix. To avoid the
optimization breaking again if the last command is a subshell
with a <>; redirection attached, we need to not only set execflg
to 0 but also clear the SH_NOFORK state bit from the 'flags'
variable which is passed on to the recursive sh_exec() call.
src/cmd/ksh93/tests/io.sh:
- Update and expand tests. Add tests for redirections attached to
simple commands (TCOM) and various kinds of code block (TSETIO).
Co-authored-by: Johnothan King <johnothanking@protonmail.com>
Resolves: https://github.com/ksh93/ksh/issues/278
Immediately after tab-completing the name of a directory, it is
not possible to type digits after the slash; ksh eats them as it
parses them as a menu selection for a nonexistent menu.
Reproducer:
$ mkdir -p emacstest/123abc
$ cd emacste[tab]123abc
Actual results:
$ cd emacstest/abc
Expected results:
$ cd emacstest/123abc
Workarounds are to press a non-numeric key followed by backspace,
or hit [tab] again to get a list of options.
Originally reported by Arnon Weinberg, 2012-12-23 07:15:19 UTC, at:
https://bugzilla.redhat.com/889745
The fix had been partially backported from ksh 93v- by AT&T
(16e4824c), which made things worse, so it was reverted (e8b3274a).
This commit backports a slightly edited version of the complete
fix. Thanks to @JohnoKing for finding the correct code. Discussion:
https://github.com/ksh93/ksh/issues/198#issuecomment-820178514
src/cmd/ksh93/edit/emacs.c: escape():
- Backport the fix for this bug that was implemented in ksh 93v-
alpha 2013-10-10. Immediately after a slash, do not stay in "\"
mode (file name completion) and reset the tab count.
src/cmd/ksh93/tests/pty.sh:
- Test the fix.
Resolves: https://github.com/ksh93/ksh/issues/198
The <>; operator doesn't work correctly if it's used as the last
command of a -c script. Reproducer:
$ echo test > a; ksh -c 'echo x 1<>; a'; cat a
x
st
This bug is caused by ksh running the last command of -c scripts
with execve(2) instead of posix_spawn(3) or fork(2). The <>;
operator is noted by the man page as being incompatible with the
exec builtin (see also the ksh93u+ man page), so it's not
surprising this bug occurs when ksh runs a command using execve:
> <>;word cannot be used with the exec and redirect built-ins.
The ksh2020 fix simply removed the code required for ksh to use
this optimization at all. It's not a performance friendly fix and
only papers over the bug, so this commit provides a better fix.
This bug was first reported at:
https://github.com/att/ast/issues/9
In addition, this commit re-enables the execve(2) optimization for
the last command for scripts loaded from a file. It was enabled in
in older ksh versions, and was only disabled in interactive shells:
https://github.com/ksh93/ast-open-history/blob/2011-06-30/src/cmd/ksh93/sh/main.c#L593-L599
It was changed on 2011-12-24 to only be used for -c scripts:
https://github.com/ksh93/ast-open-history/blob/2011-12-24/src/cmd/ksh93/sh/main.c#L593-L599
We think there is no good reason why scripts loaded from a file
should be optimised less than scripts loaded from a -c argument.
They're both scripts; there's no essential difference between them.
So this commit reverts that change. If there is a bug left in the
optimization after this fix, this revert increases the chance of
exposing it so that it can be fixed.
src/cmd/ksh93/sh/xec.c:
- The IOREWRITE flag is set when handling the <>; operator, so to
fix this bug, avoid exec'ing the last command if it uses <>;. See
also commit 17ebfbf6, which fixed another issue related to the
execve optimization.
src/cmd/ksh93/tests/io.sh:
- Enable a regression test that was failing because of this bug.
- Add the reproducer from https://github.com/att/ast/issues/9 as a
regression test.
src/cmd/ksh93/sh/main.c:
- Only avoid the non-forking optimization in interactive shells.
src/cmd/ksh93/tests/signal.sh:
- Add an extra comment to avoid the non-forking optimization in the
regression test for rhbz#1469624.
- If the regression test for rhbz#1469624 fails, show the incorrect
exit status in the error message.
src/cmd/ksh93/tests/builtins.sh,
src/cmd/ksh93/tests/options.sh:
- This bugfix was causing the options regression test to segfault
when run under shcomp. The cause is the same as
<https://github.com/ksh93/ksh/issues/165>, so as a workaround,
avoid parsing process substitutions with shcomp until that is
fixed. This workaround should also avoid the other problem
detailed in <https://github.com/ksh93/ksh/issues/274>.
Resolves: https://github.com/ksh93/ksh/issues/274
Path-bound builtins on ksh (such as /opt/ast/bin/cat) break some
basic assumptions about paths in the shell that should hold true,
e.g., that a path output by whence -p or command -v should actually
point to an executable command. This commit should fix the
following:
1. Path-bound built-ins (such as /opt/ast/bin/cat) can now be
executed by invoking the canonical path (independently of the
value of $PATH), so the following will now work as expected:
$ /opt/ast/bin/cat --version
version cat (AT&T Research) 2012-05-31
$ (PATH=/opt/ast/bin:$PATH; "$(whence -p cat)" --version)
version cat (AT&T Research) 2012-05-31
In the event an external command by that path exists, the
path-bound builtin will now override it when invoked using the
canonical path. To invoke a possible external command at that
path, you can still use a non-canonical path, e.g.:
/opt//ast/bin/cat or /opt/ast/./bin/cat
2. Path-bound built-ins will now also be found on a PATH set
locally using an assignment preceding the command, so something
like the following will now work as expected:
$ PATH=/opt/ast/bin cat --version
version cat (AT&T Research) 2012-05-31
The builtin is not found by sh_exec() because the search for
builtins happens long before invocation-local preceding
assignments are processsed. This only happens in sh_ntfork(),
before forking, or in sh_fork(), after forking. Both sh_ntfork()
and sh_fork() call path_spawn() to do the actual path search, so
a check there will cover both cases.
This does mean the builtin will be run in the forked child if
sh_fork() is used (which is the case on interactive shells with
job.jobcontrol set, or always after compiling with SHOPT_SPAWN
disabled). Searching for it before forking would mean
fundamentally redesigning that function to be basically like
sh_ntfork(), so this is hard to avoid.
src/cmd/ksh93/sh/path.c: path_spawn():
- Before doing anything else, check if the passed path appears in
the builtins tree as a pathbound builtin. If so, run it. Since a
builtin will only be found if a preceding PATH assignment
temporarily changed the PATH, and that assignment is currently in
effect, we can just sh_run() the builtin so a nested sh_exec()
invocation will find and run it.
- If 'spawn' is not set (i.e. we must return), set errno to 0 and
return -2. See the change to sh_ntfork() below.
src/cmd/ksh93/sh/xec.c:
- sh_exec(): When searching for built-ins and the restricted option
isn't active, also search bltin_tree for names beginning with a
slash.
- sh_ntfork(): Only throw an error if the PID value returned is
exactly -1. This allows path_spawn() to return -2 after running a
built-in to tell sh_ntfork() to do the right things to restore
state.
src/cmd/ksh93/sh/parse.c: simple():
- When searching for built-ins at parse time, only exclude names
containing a slash if the restricted option is active. This
allows finding pointers to built-ins invoked by literal path like
/opt/ast/bin/cat, as long as that does not result from an
expansion. This is not actually necessary as sh_exec() will also
cover this case, but it is an optimisation.
src/lib/libcmd/getconf.c:
- Replace convoluted deferral to external command by a simple
invocation of the path to the native getconf command determined
at compile time (by src/lib/libast/comp/conf.sh). Based on:
https://github.com/ksh93/ksh/issues/138#issuecomment-816384871
If there is ever a system that has /opt/ast/bin/getconf as its
default native external 'getconf', then there would still be an
infinite recursion crash, but this seems extremely unlikely.
Resolves: https://github.com/ksh93/ksh/issues/138
Previous discussion: https://github.com/att/ast/issues/485
If ksh attempts to execute a non-executable command found in the
PATH, in some instances the error message and return status are
incorrect. In the example below, ksh returns with exit status 126
when using the -c execve(2) optimization or when using fork(2) in
an interactive shell. However, using posix_spawn(3) causes the exit
status to change:
$ echo 'print cannot execute' > /tmp/x
# Runs command with spawnveg (i.e., posix_spawn or vfork)
$ ksh -c 'PATH=/tmp; x; echo $?'
ksh: x: not found
127
# Runs command with execve
$ ksh -c 'PATH=/tmp; x'; echo $?
ksh: x: cannot execute [Permission denied]
126
# Runs command with fork
$ ksh -ic 'PATH=/tmp; x; echo $?'
ksh: x: cannot execute [Permission denied]
126
Since 'x' is in the PATH but can't be executed, the correct exit
status is 126, not 127. It's worth noting this bug doesn't cause
the regression tests to fail with ksh93u+m, but it does cause one
test to fail when run under dtksh:
path.sh[706]: Long nonexistent command name: got status 126, ''
This commit backports various fixes for this bug from ksh2020, with
additional fixes applied (since there were still some additional
issues the ksh2020 patch didn't fix). The lacking regression test
for exit status 126 in path.sh has been rewritten to test for more
scenarios where ksh failed to return the correct error message
and/or exit status. I can also confirm with this patch applied the
path.sh regression tests now pass when run under dtksh.
src/cmd/ksh93/sh/path.c:
- Add a comment to path_absolute() describing 'oldpp' is the
current pointer in the while loop and 'pp' is the next pointer.
Backported from:
a6cad450
- The patch from ksh2020 didn't fix this bug in the SHOPT_SPAWN
code (because ksh2020 prefers fork(2)), so issues with the exit
status could still occur when using spawnveg. To fix this, always
set 'noexec' to the value of errno if can_execute fails. Before
this fix, errno was discarded if 'pp' was a null pointer and
can_execute failed.
- If a command couldn't be executed and the error wasn't ENOENT,
save errno in a 'not_executable' variable. If an executable
command couldn't be found in the PATH, exit with status 126 and
set errno to the saved value. This was based on a ksh2020 bugfix,
but it has been reworked a little bit to fix a bug that caused a
mismatch between the error message shown and errno. Example with
a non-executable file in PATH:
$ nonexec
ksh2020: nonexec: cannot execute [No such file or directory]
The ksh2020 patch: <https://github.com/att/ast/pull/493>
- Backport a ksh2020 bugfix for directories in the PATH when
running one of the added regression tests on OpenBSD:
https://github.com/att/ast/pull/767
src/cmd/ksh93/data/msg.c,
src/cmd/ksh93/include/shell.h,
src/cmd/ksh93/sh/{path,xec}.c:
- If a command name is too long (ENAMETOOLONG), then it wasn't
found in the PATH. For that case return exit status 127, like
for ENOENT.
src/cmd/ksh93/tests/path.sh:
- Replace the old test with a new set of more extensive tests.
These tests check the error message and exit status when ksh
attempts to run a command using any of the following:
- execve(2), used with the last command run with -c (*A tests).
- posix_spawn(3)/vfork(2), used in noninteractive scripts (*B tests).
- fork(2), used in interactive shells with job control (*C tests).
- command -x (*D tests).
- exec(1) (*E tests).
- Add a regression test from ksh2020 for attempting to execute a
directory:
https://github.com/att/ast/pull/758
src/lib/libast/include/ast.h,
src/lib/libast/include/wait.h:
- Avoid bitshifts in macros for static error codes. The return
values of command not found and exec related errors are static
values and should not require any macro magic for calculation.
Backported from: c073b102
- Simplify EXIT_* and W* macros to use 8 bits.
