Notable changes:
.github/workflows/ci.yml:
- Run 'bin/package test' on the github runner so we test iffe too.
src/cmd/ksh93/sh/subshell.c:
- sh_assignok was usually called like 'np = sh_assignok(np,0)'. But
the function never changes np, it just returns the np value
passed to it, so the assignment is pointless and that function
can be changed to a void.
src/cmd/ksh93/sh/fault.c: sh_fault():
- Remove check for sh.subshell after sh_isstate(SH_INTERACTIVE). As
of 48ba6964, it is never set in subshells.
This commit backports all of the relevant .sh.match bugfixes from
ksh93v-. Most of the .sh.match rewrite is from versions 2012-08-24
and 2012-10-04, with patches from later releases of 93v- and
ksh2020 also applied. Note that there are still some remaining bugs
in .sh.match, although now the total count of .sh.match bugs should
be less that before.
These are the relevant changes in the ksh93v- changelog that were
backported:
12-08-07 .sh.match no longer gets set for patterns in PS4 during
set -x.
12-08-10 Rewrote .sh.match expansions fixing several bugs and
improving performance.
12-08-22 .sh.match now handles subpatterns that had no matches with
${var//pattern} correctly.
12-08-21 A bug in setting .sh.match after ${var//pattern/string}
when string is empty has been fixed.
12-08-21 A bug in setting .sh.match after [[ string == pattern ]]
has been fixed.
12-08-31 A bug that could cause a core dump after
typeset -m var=.sh.match has been fixed.
12-09-10 Fixed a bug in typeset -m the .sh.match is being renamed.
12-09-07 Fixed a bug in .sh.match code that coud cause the shell
to quitely
13-02-21 The 12-01-16 bug fix prevented .sh.match from being used
in the replacement string. The previous code was restored
and a different fix which prevented .sh.match from being
computed for nested replacement has been used instead.
13-05-28 Fixed two bug for typeset -c and typeset -m for variable
.sh.match.
Changes:
- The SHOPT_2DMATCH option has been removed. This was already the
default behavior previously, and now it's documented in the man
page.
- init.c: Backported the sh_setmatch() rewrite from 93v- 2012-08-24
and 2012-10-04.
- Backported the libast 93v- strngrpmatch() function, as the
.sh.match rewrite requires this API.
- Backported the sh_match regression tests from ksh93v-, with many
other sh_match tests backported from ksh2020. Much of the sh_match
script is based on code from Roland Mainz:
https://marc.info/?l=ast-developers&m=134606574109162&w=2https://marc.info/?l=ast-developers&m=134490505607093
- tests/{substring,treemove}.sh: Backported other relevant .sh.match
fixes, with tests added to the substring and treemove test scripts.
- tests/types.sh: One of the (now reverted) memory leak bugfixes
introduced a CI test failure in this script, so for that test the
error message has been improved.
- string/strmatch.c: The original ksh93v- code for the strngrpmatch()
changes introduced a crash that could occur because strlen would
be used on a null pointer. This has been fixed by avoiding strlen
if the string is null.
One nice side effect of these changes is a considerable performance
improvement in the shbench[1] gsub benchmark (results from 20
iterations with CCFLAGS=-Os):
--------------------------------------------------
name /tmp/ksh-current /tmp/ksh-matchfixes
--------------------------------------------------
gsub.ksh 0.883 [0.822-0.959] 0.457 [0.442-0.505]
--------------------------------------------------
Despite all of the many fixes and improvements in the backported
93v- .sh.match code, there are a few remaining bugs:
- .sh.match is printed with a default [0] subscript (see also
https://github.com/ksh93/ksh/issues/308#issuecomment-1025016088):
$ arch/*/bin/ksh -c 'echo ${!.sh.match}'
.sh.match[0]
This bug appears to have been introduced by the changes from
ksh93v- 2012-08-24.
- The wrong variable name is given for 'parameter not set' errors
(from https://marc.info/?l=ast-developers&m=134489094602596):
$ arch/*/bin/ksh -u
$ x=1234
$ true "${x//~(X)([012])|([345])/}"
$ compound co
$ typeset -m co.array=.sh.match
$ printf "%q\n" "${co.array[2][0]}"
arch/linux.i386-64/bin/ksh: co.array[2][(null)]: parameter not set
- .sh.match leaks out of subshells. Further information and a
reproducer can be found here:
https://marc.info/?l=ast-developers&m=136292897330187
[1]: https://github.com/ksh-community/shbench
Notable changes:
src/cmd/ksh93/include/fault.h:
- Get rid of the superflous sh pointer argument in the
sh_pushcontext() and sh_popcontext() macros. (re: 2d3ec8b6)
src/cmd/ksh93/tests/io.sh:
- Tweak a process substitution test to allow up to a second for
unused process substitution processes to disappear. On the Alpine
Linux console (at least the musl libc version), this is needed to
avoid a test failure as long as no GUI is active. As soon as you
start X11, this phenomenon disappears, even on the console. Very
strange, but also very probably not ksh's fault.
src/cmd/ksh93/tests/shtests:
- Instead of just SIGCONT and SIGPIPE, set all signals to default,
just to be sure to avoid spurious test failures due to signals
that were ignored on entry. (It made no difference to the
aforementioned Alpine Linux test failure, so ignored signals had
nothing to do with that -- but still a good idea.)
.github/workflows/ci.yml:
- On the GitHub CI runs, when testing with SHOPTs disabled, disable
SHOPT_SPAWN as well, which tests that everything still works
correctly with the regular fork(2) method.
COPYRIGHT:
- Remove duplicate of BSD license.
This commit fixes a bug in the 'read' built-in: it did not properly
skip over multibyte characters. The bug never affects UTF-8 locales
because all UTF-8 bytes have the high-order bit set. But Shift-JIS
characters may include a byte corresponding to the ASCII backslash
character, which cauased buggy behaviour when using 'read' without
the '-r' option that disables backslash escape processing.
It also makes the regression tests compatible with Shift-JIS
locales. They failed with syntax errors.
src/cmd/ksh93/bltins/read.c:
- Use the multibyte macros when skipping over word characters.
Based on a patch from the old ast-developers mailing list:
https://www.mail-archive.com/ast-developers@lists.research.att.com/msg01848.html
src/cmd/ksh93/include/defs.h:
- Be a bit smarter about causing the compiler to optimise out
multibyte code when SHOPT_MULTIBYTE is disabled. See the updated
comment for details.
src/cmd/ksh93/tests/locale.sh:
- Put all the supported locales in an array for future tests.
- Add test for the 'read' bug. Include it in a loop that tests
64 SHIFT-JIS character combinations. Only one fails on old ksh:
the one where the final byte corresponds to the ASCII backslash.
It doesn't hurt to test all the others anyway.
src/cmd/ksh93/tests/basic.sh,
src/cmd/ksh93/tests/builtins.sh,
src/cmd/ksh93/tests/quoting2.sh:
- Fix syntax errors that occurred in SHIFT-JIS locales as the
parser was processing literal UTF-8 characters. Not executing
that code is not enough; we need to make sure it never gets
parsed as well. This is done by wrapping the commands containing
literal UTF-8 strings in an 'eval' command as a single-quoted
operand.
.github/workflows/ci.yml:
- Run the tests in the ja_JP.SJIS locale instead of ja_JP.UTF-8.
UTF-8 is already covered by the nl_NL.UTF-8 test run; that should
be good enough.
.github/workflows/ci.yml:
- Go back to wrapping the regression tests in script(1).
src/cmd/ksh93/data/builtins.c:
- Never mind about the stty builtin.
src/cmd/ksh93/tests/pty.sh:
- Refuse to run if there isn't a functioning tty.
- Make sure stty(1) works on /dev/tty by redirecting stdin.
The Mac runner is still broken: intermittent pipe- and
signal-related regressions that do not occur on any real Mac.
https://github.com/ksh93/ksh/runs/1892358749
.github/workflows/ci.yml:
- Remove the macOS runner.
src/cmd/ksh93/tests/pty.sh:
- Do not skip pty tests if there is no tty. (On FreeBSD with no
tty, the tty builtin would need to be enabled in builtins.c.)
src/cmd/ksh93/tests/bracket.sh:
- Don't be noisy when skipping unavailable locales.
It is desirable to be able to run the tests on a system without
a functioning tty. Since this distribution comes with its own
pseudo-tty facility, pty, it should be possible to run the few
tests that require a tty on the pseudo-tty instead. I've verified
that they fail as expected on older ksh93.
Discussion: https://github.com/ksh93/ksh/pull/171
src/cmd/ksh93/tests/basic.sh,
src/cmd/ksh93/tests/bracket.sh:
- Remove tests that require a tty.
src/cmd/ksh93/tests/pty.sh:
- Put them here, adapted to work as interactive pty scripts.
src/cmd/ksh93/tests/shtests:
- No longer refuse to run if there is no functioning tty.
.github/workflows/ci.yml:
- Since the tests no longer require a tty, no longer use script(1)
to get a pseudo-tty. Let's see if this works...
- Re-enable the Mac runner (re: 14632361). Maybe it has improved.
It was easier than expected to fix this one. The many regression
test failures caused by disabling it were all due to one bug:
'typeset -p' output broke when building without this option.
src/cmd/ksh93/sh/nvtree.c: nv_attribute():
- In this function to print the attributes of a name-value pair,
move four lines of code out of #if SHOPT_FIXEDARRAY...#endif that
were inadvertently moved into the #if block in ksh93 2012-05-18.
See the changes to nvtree.c in this multishell repo commit:
https://github.com/multishell/ksh93/commit/aabab56a
src/cmd/ksh93/data/builtins.c:
- Update/rewrite 'typeset -a' documentation.
- Make it adapt to SHOPT_FIXEDARRAY.
- Fix a few typos.
src/cmd/ksh93/tests/arrays2.sh:
- Only one regression test needs a SHOPT_FIXEDARRAY check.
.github/workflows/ci.yml:
- Disable SHOPT_FIXEDARRAY when regression-testing without SHOPTs.
- Enable xtrace, add ':' commands for traced comments. This should
make the CI runner output logs a little more readable.
Many compile-time options were broken so that they could not be
turned off without causing compile errors and/or regression test
failures. This commit now allows the following to be disabled:
SHOPT_2DMATCH # two dimensional ${.sh.match} for ${var//pat/str}
SHOPT_BGX # one SIGCHLD trap per completed job
SHOPT_BRACEPAT # C-shell {...,...} expansions (, required)
SHOPT_ESH # emacs/gmacs edit mode
SHOPT_HISTEXPAND # csh-style history file expansions
SHOPT_MULTIBYTE # multibyte character handling
SHOPT_NAMESPACE # allow namespaces
SHOPT_STATS # add .sh.stats variable
SHOPT_VSH # vi edit mode
The following still break ksh when disabled:
SHOPT_FIXEDARRAY # fixed dimension indexed array
SHOPT_RAWONLY # make viraw the only vi mode
SHOPT_TYPEDEF # enable typeset type definitions
Compiling without SHOPT_RAWONLY just gives four regression test
failures in pty.sh, but turning off SHOPT_FIXEDARRAY and
SHOPT_TYPEDEF causes compilation to fail. I've managed to tweak the
code to make it compile without those two options, but then dozens
of regression test failures occur, often in things nothing directly
to do with those options. It looks like the separation between the
code for these options and the rest was never properly maintained.
Making it possible to disable SHOPT_FIXEDARRAY and SHOPT_TYPEDEF
may involve major refactoring and testing and may not be worth it.
This commit has far too many tweaks to list. Notables fixes are:
src/cmd/ksh93/data/builtins.c,
src/cmd/ksh93/data/options.c:
- Do not compile in the shell options and documentation for
disabled features (braceexpand, emacs/gmacs, vi/viraw), so the
shell is not left with no-op options and inaccurate self-doc.
src/cmd/ksh93/data/lexstates.c:
- Comment the state tables to associte them with their IDs.
- In the ST_MACRO table (sh_lexstate9[]), do not make the S_BRACE
state for position 123 (ASCII for '{') conditional upon
SHOPT_BRACEPAT (brace expansion), otherwise disabling this causes
glob patterns of the form {3}(x) (matching 3 x'es) to stop
working as well -- and that is ksh globbing, not brace expansion.
src/cmd/ksh93/edit/edit.c: ed_read():
- Fixed a bug: SIGWINCH was not handled by the gmacs edit mode.
src/cmd/ksh93/sh/name.c: nv_putval():
- The -L/-R left/right adjustment options to typeset do not count
zero-width characters. This is the behaviour with SHOPT_MULTIBYTE
enabled, regardless of locale. Of course, what a zero-width
character is depends on the locale, but control characters are
always considered zero-width. So, to avoid a regression, add some
fallback code for non-SHOPT_MULTIBYTE builds that skips ASCII
control characters (as per iscntrl(3)) so they are still
considered to have zero width.
src/cmd/ksh93/tests/shtests:
- Export the SHOPT_* macros from SHOPT.sh to the tests as
environment variables, so the tests can check for them and decide
whether or how to run tests based on the compile-time options
that the tested binary was presumably compiled with.
- Do not run the C.UTF-8 tests if SHOPT_MULTIBYTE is not enabled.
src/cmd/ksh93/tests/*.sh:
- Add a bunch of checks for SHOPT_* env vars. Since most should
have a value 0 (off) or 1 (on), the form ((SHOPT_FOO)) is a
convenient way to use them as arithmetic booleans.
.github/workflows/ci.yml:
- Make GitHub do more testing: run two locale tests (Dutch and
Japanese UTF-8 locales), then disable all the SHOPTs that we can
currently disable, recompile ksh, and run the tests again.
Apparently some systems are still configured to use GMT instead of
UTC after all. This included our own GitHub CI runner config.
Oops. This made the previous commit fail to pass the CI test run.
We can't win this one, it's got to be either one or the other.
UTC is the international standard on which civil time is based.
GMT is often taken as synonymous for UTC, but in navigation,
it can differ from UTC by up to 0.9 seconds. Ref.:
https://en.wikipedia.org/w/index.php?title=Greenwich_Mean_Time&oldid=963422787
The more ambiguous term should not be the first preference.
src/cmd/ksh93/tests/builtins.sh:
- Before checking 'printf %T now' output against 'date' output,
change any ' GMT ' in the latter to ' UTC '.
.github/workflows/ci.yml:
- Set time zone to UTC, not GMT.
.github/workflows/ci.yml:
- Disable Mac build as the GitHub runners appear to be broken
(e.g. SIGCHLD fails, unlike on real Macs) and tend to hang.
- For the Linux build:
- Set GMT timezone for 'printf %T' tests in builtins.sh.
- Set the ulimit for open files to 1024 as the subshell.sh tests
need a lot of open files.
- As the runners lack the POSIX standard /dev/tty device, use the
script command to provide a fake /dev/tty for the bracket.sh
tests that use 'test -t $fd'.
Ref.: https://github.com/actions/runner/issues/241
