diff --git a/roles/network/defaults/main.yml b/roles/network/defaults/main.yml
index ff120367e..73f547964 100644
--- a/roles/network/defaults/main.yml
+++ b/roles/network/defaults/main.yml
@@ -9,21 +9,21 @@
 # Ethernet - IF NECESSARY, CUSTOMIZE THESE 4+3 VARS IN /etc/iiab/local_vars.yml
 #
 # See "How do I set a static IP Address?" for Ethernet in http://FAQ.IIAB.IO
-# wan_ip: dhcp         # wan_ip: 192.168.1.99
-# wan_netmask:         # wan_netmask: 255.255.255.0
-# wan_gateway:         # wan_gateway: 192.168.1.1
-# wan_nameserver:      # wan_nameserver: 192.168.1.1
+# wan_ip: dhcp       # wan_ip: 192.168.1.99
+# wan_netmask:       # wan_netmask: 255.255.255.0
+# wan_gateway:       # wan_gateway: 192.168.1.1
+# wan_nameserver:    # wan_nameserver: 192.168.1.1
 #
 # wan_try_dhcp_then_static_ip: True  # Facilitate field updates w/ cablemodems.
-# dhcp_timeout: 10     # Revert to Static IP or 169.254.x.y if DHCP isn't
+# dhcp_timeout: 10    # Revert to Static IP or 169.254.x.y if DHCP isn't
 # detected on the Ethernet network in 10 seconds (dhcpcd default is 30 sec).
-# wan_ipv4ll: False    # Keep this as 'False' to strongly mandate Static IP
-# <wan_ip> for eth0 (and avoid link-local 169.254.x.y if DHCP isn't detected).
+# wan_link_local: False    # Keep this as 'False' to strongly mandate Ethernet
+# Static IP <wan_ip> (and avoid link-local 169.254.x.y if DHCP isn't detected).
 #
-# Change this to 'True' if you want the 3-steps below:
-# 1. Try to set eth0 as Static IP <wan_ip> (if 'arp <wan_gateway>' responds).
-# 2. Try to set eth0 using DHCP, if DHCP responds within 10 seconds.
-# 3. Set eth0 to a link-local address 169.254.x.y if both above fail.
+# Change this to 'True' if you want the 3-steps below: (e.g. for eth0 or eno1)
+# 1. Try to set Ethernet Static IP <wan_ip> (if 'arp <wan_gateway>' responds).
+# 2. Try to set Ethernet IP using DHCP, if DHCP responds within ~10 seconds.
+# 3. Set Ethernet IP to a link-local address 169.254.x.y if both above fail.
 # Details in roles/network/templates/network/dhcpcd.conf.j2 for /etc/dhcpcd.conf
 
 # Wi-Fi - IF NECESSARY, CUSTOMIZE THESE 6 VARIABLES IN /etc/iiab/local_vars.yml