Merge pull request #111 from iiab/master

sync from iiab/iiab

CONTRIBUTING.md

@@ -2,7 +2,9 @@ Contributing to Internet-in-a-Box (IIAB)
 =======================================
 Internet-in-a-Box runs on various GNU/Linux operating systems such as Fedora, Ubuntu, Debian, CentOS and Raspbian.
 
-You can install Internet-in-a-Box on most late model desktop and laptop computers. It also supports Intel NUC, Intel Gigabyte BRIX, OLPC XO-1.5, XO-1.75, XO-4, Raspberry Pi 2 and Raspberry Pi 3. A VirtualBox VM can also used for testing purposes. Using Docker containers however is not recommended as our Ansible provisioning system requires low-level access to the operating system.
+You can install Internet-in-a-Box on x86_64 PCs/laptops and Raspberry Pi 3 (or 3 B+).  Example PC's include Intel NUC and Gigabyte BRIX.  Partial support is also available on OLPC laptops like the XO-1.5, XO-1.75 and XO-4.  A VirtualBox VM can also be used for testing purposes.  Using Docker containers however is not recommended as our Ansible provisioning system requires low-level access to the operating system.
+
+Finally, running Internet-in-a-Box on the Raspberry Pi Zero W is also possible, if you transfer a working IIAB (microSD card) that was built up inside a Raspberry Pi 3 (or 3 B+).
 
 Please refer to [IIAB Platforms](https://github.com/iiab/iiab/wiki/IIAB-Platforms) for more information.
 
@@ -11,12 +13,12 @@ Internet-in-a-Box uses [Ansible](https://www.ansible.com/) infrastructure automa
 ├── roles
 │   ├── 1-prep
 │   │   ├─ defaults
-|   |   |    ├──main.yml (lowest precedence variable definitions, overridden by <repo_root>/vars/default_vars.yml, overridden by ./vars/local_vars.yml.
+|   |   |    ├──main.yml (lowest precedence variable definitions, overridden by <repo_root>/vars/default_vars.yml, overridden by /etc/iiab/local_vars.yml)
 │   │   ├── README.rst
 │   │   ├── tasks
 |   |   |    ├──main.yml (specifies the actions to install this role
 │   │   └── templates
-|   |   |    ├<(text files where ansible variables are substituted, specified via {% <variable> %} containers-(jinja2 language).
+|   |   |    ├──<text files where ansible variables are substituted, specified via {% <variable> %} containers-(jinja2 language)>
 │   ├── 2-common
 │   │   ├── README.rst
 │   │   ├── tasks
@@ -24,11 +26,11 @@ Internet-in-a-Box uses [Ansible](https://www.ansible.com/) infrastructure automa
 ```
 At runtime, Ansible gathers system information and makes it available (called 'facts') and combines this with playbook defined 'variables' to guide the installation process. The execution follows a sequence of cascading steps:
 
-1. Bash script `./runansible` follows instructions in `iiab.yml` in the root directory.
+1. Bash script `./iiab-install` follows instructions in `iiab-stages.yml` in the root directory.
 
-2. `iiab.yml` calls 9 aggregate roles (the numbered directories under `./roles/`).
+2. `iiab-stages.yml` calls 9 aggregate roles (AKA stages, these are the numbered directories under `./roles/`) and then the network role.  (Aside: the network role can also later be run using `./iiab-network`)
 
-3. Each aggregate role has a `<role>/meta/main.yml` which calls the individual named roles.
+3. Each aggregate role AKA stage has a `<role>/meta/main.yml` which calls its needed roles.
 
 Please refer to the [IIAB Architecture](https://github.com/iiab/iiab/wiki/IIAB-Architecture) and [IIAB Variables]( https://github.com/iiab/iiab/wiki/IIAB-Variables) pages for more information.
 

iiab-base.yml

@@ -5,7 +5,7 @@
   vars_files:
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
 
   roles:
       - { role: 0-init, tags: ['0-init'] }

iiab-from-console.yml

@@ -5,7 +5,7 @@
   vars_files:
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
   - /etc/iiab/config_vars.yml
 
   roles:

iiab-install

@@ -14,6 +14,8 @@ MIN_ANSIBLE_VER=2.5.6
 
 export ANSIBLE_LOG_PATH="$CWD/iiab-install.log"
 
+echo -e "\n\n./iiab-install BEGUN IN /opt/iiab/iiab\n"
+
 if [ ! -f /etc/ansible/facts.d/local_facts.fact ]; then
     mkdir -p /etc/ansible/facts.d
 fi
@@ -30,7 +32,7 @@ if [ "$1" != "--debug" ] && [ "$1" != "--reinstall" ] && [ "$1" != "" ]; then
     echo "Use './iiab-install' for regular installs, or to continue an install."
     echo "Use './iiab-install --reinstall' to force running all Stages 0-9."
     echo "Use './iiab-install --debug' to run Stage 0, followed by Stages 3-9."
-    echo "Use './runtags' to run a single Stage or Tag or Role."
+    echo "Use './runrole' to run a single Stage or Role."
     echo "Use './iiab-network' to run Network sections."
     exit 1
 fi
@@ -109,25 +111,25 @@ if [ -f /etc/iiab/iiab.env ]; then
         echo -e "\nEXITING: STAGE (counter) in /etc/iiab/iiab.env shows Stage 9 Is Already Done."
         echo "Use './iiab-install --reinstall' to force running all Stages 0-9."
         echo "Use './iiab-install --debug' to run Stage 0, followed by Stages 3-9."
-        echo "Use './runtags' to run a single Stage or Tag or Role."
-        echo "Use './iiab-network' to run Network sections."
-        exit 1
+        echo "Use './runrole' to run a single Stage or Role."
+        echo -e "Use './iiab-network' to run Network sections.\n\n"
+        exit 0    # allows rerunning http://download.iiab.io/6.6/install.txt
     fi
 fi
 if [ "$STAGE" -lt 2 ] && [ "$1" == "--debug" ]; then
     echo -e "\n'--debug' *ignored* as STAGE (counter) < 2."
 fi
 
-# If vars/local_vars.yml is missing, put a default file in place.
-if [ ! -f ./vars/local_vars.yml ]; then
+# If /etc/iiab/local_vars.yml is missing, put a default file in place.
+if [ ! -f /etc/iiab/local_vars.yml ]; then
     case $OS in
         OLPC | fedora)
-            cp ./vars/local_vars_olpc.yml ./vars/local_vars.yml
-            echo -e "\nvars/local_vars.yml created from local_vars_olpc.yml defaults."
+            cp ./vars/local_vars_olpc.yml /etc/iiab/local_vars.yml
+            echo -e "\n/etc/iiab/local_vars.yml created from /opt/iiab/iiab/vars/local_vars_olpc.yml defaults."
             ;;
         centos | debian | ubuntu | raspbian)
-            cp ./vars/local_vars_medium.yml ./vars/local_vars.yml
-            echo -e "\nvars/local_vars.yml created from local_vars_medium.yml defaults."
+            cp ./vars/local_vars_medium.yml /etc/iiab/local_vars.yml
+            echo -e "\n/etc/iiab/local_vars.yml created from /opt/iiab/iiab/vars/local_vars_medium.yml defaults."
             echo "See MIN/MEDIUM/BIG options @ http://wiki.iiab.io/local_vars.yml"
             ;;
         *)
@@ -142,3 +144,5 @@ echo -e "\nRunning local playbooks....Stage 0 will now run....followed by Stages
 
 ansible -m setup -i $INVENTORY localhost --connection=local >> /dev/null
 ansible-playbook -i $INVENTORY $PLAYBOOK ${ARGS} --connection=local
+
+echo -e "\n./iiab-install COMPLETED IN /opt/iiab/iiab\n\n"

iiab-network.yml

@@ -5,7 +5,7 @@
   vars_files:
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
   - /etc/iiab/config_vars.yml
 
   roles:

iiab-stages.yml

@@ -6,7 +6,7 @@
   - roles/0-init/defaults/main.yml
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
 
   tasks:
 

iiab.yml.deprecated

@@ -5,7 +5,7 @@
   vars_files:
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
   - /etc/iiab/config_vars.yml
 
   roles:

install-support

@@ -14,7 +14,7 @@ then
  exit 1
 fi
 
-sed -i -e "s/openvpn_install: False/openvpn_install: True/" vars/local_vars.yml
-sed -i -e "s/openvpn_enabled: False/openvpn_enabled: True/" vars/local_vars.yml
+sed -i -e "s/openvpn_install: False/openvpn_install: True/" /etc/iiab/local_vars.yml
+sed -i -e "s/openvpn_enabled: False/openvpn_enabled: True/" /etc/iiab/local_vars.yml
 
 ansible-playbook -i $INVENTORY $PLAYBOOK --connection=local

roles/4-server-options/README.rst

@@ -2,7 +2,7 @@
 4-server-options README
 =======================
 
-Whereas 3-base-server installs critical packages needed by all, this 4th stage installs a broad array of *options* -- depending on which server apps will be installed in later stages -- as specified in /opt/iiab/iiab/vars/local_vars.yml
+Whereas 3-base-server installs critical packages needed by all, this 4th stage installs a broad array of *options* -- depending on which server apps will be installed in later stages -- as specified in /etc/iiab/local_vars.yml
 
 This includes some networking fundamentals, before they're configured later on.
 

roles/calibre/defaults/main.yml

@@ -21,5 +21,5 @@ calibre_src_url: "https://raw.githubusercontent.com/kovidgoyal/calibre/master/se
 
 # USE TO TEST debs.yml (RASPBIAN APPROACH!) ON DEBIAN 9.X: (now handled by calibre_via_debs in /opt/iiab/iiab/vars/*)
 #calibre_debs_on_debian: True
-# Enable unstable .deb's, not just testing .deb's: (moved to vars/local_vars.yml & vars/default_vars.yml)
+# Enable unstable .deb's, not just testing .deb's: (moved to /etc/iiab/local_vars.yml & /opt/iiab/iiab/vars/default_vars.yml)
 #calibre_unstable_debs: False

roles/calibre/templates/calibre.conf

@@ -1,4 +1,4 @@
-# http://box/XYZ mnemonic if properly set within /opt/iiab/iiab/vars/local_vars.yml
+# http://box/XYZ mnemonic if properly set within /etc/iiab/local_vars.yml
 ProxyPass /{{ calibre_web_path }}  http://localhost:{{ calibre_port }}
 ProxyPassReverse /{{ calibre_web_path }}  http://localhost:{{ calibre_port }}
 

roles/kalite/defaults/main.yml

@@ -1,5 +1,5 @@
 # The values here are defaults.
-# To override them edit the main var definitions in /opt/iiab/iiab/vars/local_vars.yml
+# To override them edit /etc/iiab/local_vars.yml
 
 kalite_install: True
 kalite_enabled: False

roles/kolibri/defaults/main.yml

@@ -1,5 +1,5 @@
 # The values here are defaults.
-# To override them edit /opt/iiab/iiab/vars/local_vars.yml
+# To override them edit /etc/iiab/local_vars.yml
 
 # Installation Variables
 kolibri_install: False

roles/network/defaults/main.yml

@@ -44,7 +44,7 @@ hostapd_wait: 1
 host_wifi_mode: g
 host_channel: 6
 host_wireless_n: False
-# Below moved to /opt/iiab/iiab/vars/local_vars.yml: (so implementer sets this)
+# Below moved to /etc/iiab/local_vars.yml: (so implementer sets this)
 #host_country_code: US
 hostapd_secure: True
 hostapd_password: "iiab2017"

roles/network/tasks/named.yml

@@ -1,6 +1,7 @@
 - name: Install named packages (debuntu)
-  package: name={{ item }}
-           state=present
+  package:
+    name: "{{ item }}"
+    state: present
   with_items:
    - bind9
    - bind9utils
@@ -9,8 +10,9 @@
     - download
 
 - name: Install named packages (OS's that are not debuntu)
-  package: name={{ item }}
-           state=present
+  package:
+    name: "{{ item }}"
+    state: present
   with_items:
    - bind
    - bind-utils
@@ -20,26 +22,30 @@
 
 # or we have to change the serial number in the config files.
 - name: Stop named before copying files
-  service: name={{ dns_service }} state=stopped
+  service:
+    name: "{{ dns_service }}"
+    state: stopped
   when: first_run and is_debuntu
 
 - name: Set folder permission
-  file: path={{ item }}
-        owner={{ dns_user }}
-        group=root
-        mode=0755
-        state=directory
+  file:
+    path: "{{ item }}"
+    owner: "{{ dns_user }}"
+    group: root
+    mode: 0755
+    state: directory
   with_items:
     - /var/named-iiab
     - /var/named-iiab/data
     - /etc/sysconfig/olpc-scripts/domain_config.d
 
 - name: Configure named
-  template: src={{ item.src }}
-            dest={{ item.dest }}
-            owner={{ item.owner }}
-            group=root
-            mode={{ item.mode }}
+  template:
+    src: "{{ item.src }}"
+    dest: "{{ item.dest }}"
+    owner: "{{ item.owner }}"
+    group: root
+    mode: "{{ item.mode }}"
   with_items:
     - { src: 'roles/network/templates/named/named-iiab.conf.j2', dest: '/etc/named-iiab.conf', owner: "root", mode: '0644' }
     - { src: 'roles/network/templates/named/named.j2', dest: '/etc/sysconfig/named', owner: "root", mode: '0644' }
@@ -65,31 +71,38 @@
     - { src: 'roles/network/templates/named/named.blackhole', dest: '/var/named-iiab/named.blackhole', owner: "{{ dns_user }}", mode: '0644' }
 
 - name: Substitute our unit file which uses $OPTIONS from sysconfig
-  template: src=roles/network/templates/named/{{ dns_service }}.service
-            dest=/etc/systemd/system/{{ dns_service }}.service
-            mode=0644
+  template:
+    src: "roles/network/templates/named/{{ dns_service }}.service"
+    dest: "/etc/systemd/system/{{ dns_service }}.service"
+    mode: 0644
 
 - name: The dns-jail redirect requires the named.blackhole, disabling recursion
 #        in named-iiab.conf, and the redirection of 404 error documents to /
-  template: src=roles/network/templates/named/dns-jail.conf dest=/etc/{{ apache_config_dir }}/
+  template:
+    src: roles/network/templates/named/dns-jail.conf
+    dest: "/etc/{{ apache_config_dir }}/"
   when: dns_jail_enabled
 
-- name: Separate enabling required for debuntu
-  file: src=/etc/{{ apache_config_dir }}/dns-jail.conf
-        path=/etc/{{ apache_service }}/sites-enabled/dns-jail.conf
-        state=link
+- name: Separate enabling required (debuntu)
+  file:
+    src: "/etc/{{ apache_config_dir }}/dns-jail.conf"
+    path: "/etc/{{ apache_service }}/sites-enabled/dns-jail.conf"
+    state: link
   when: is_debuntu and dns_jail_enabled
 
-- name: Separate enabling/disabling required (debuntu)
-  file: src=/etc/{{ apache_config_dir }}/dns-jail.conf
-        path=/etc/{{ apache_service }}/sites-enabled/dns-jail.conf
-        state=absent
+- name: Separate disabling required (debuntu)
+  file: 
+    path: "/etc/{{ apache_service }}/sites-enabled/dns-jail.conf"
+    state: absent
   when: is_debuntu and not dns_jail_enabled
 
 - name: Separate enabling/disabling required (OS's that are not debuntu)
-  file: path=/etc/{{ apache_config_dir }}/dns-jail.conf
-        state=absent
+  file:
+    path: "/etc/{{ apache_config_dir }}/dns-jail.conf"
+    state: absent
   when: not is_debuntu and not dns_jail_enabled
 
 - name: Start named after copying files
-  service: name={{ dns_service }} state=started
+  service:
+    name: "{{ dns_service }}"
+    state: started

roles/rachel/README.rst

@@ -13,7 +13,7 @@ Do the following:
 * cd /library/rachel
 * mv /library/rachelusb_32EN_3.1.4/RACHEL/bin .
 * you should see /library/rachel/bin/www/index.php
-* re-run ansible (making sure that rachel_enabled: True has been set in vars/local_vars.yml
+* re-run ansible (making sure that rachel_enabled: True has been set in /etc/iiab/local_vars.yml
 
 Locations
 ---------

run-one-role.yml

@@ -5,7 +5,7 @@
   vars_files:
   - vars/default_vars.yml
   - vars/{{ ansible_local.local_facts.os_ver }}.yml
-  - vars/local_vars.yml
+  - /etc/iiab/local_vars.yml
   - /etc/iiab/config_vars.yml
 
   roles:

scripts/ansible

@@ -21,7 +21,7 @@ CURR_VER="undefined"
 export DEBIAN_FRONTEND=noninteractive
 
 if [ ! `command -v ansible-playbook` ]; then   # "command -v" is POSIX compliant; also catches built-in commands like "cd"
-    echo "Installing --- Please Wait"
+    echo "scripts/ansible will now try to install Ansible --- Please Wait"
     if [ -f /etc/centos-release ]; then
         yum -y install ca-certificates nss epel-release
         yum -y install git bzip2 file findutils gzip hg svn sudo tar which unzip xz zip libselinux-python
@@ -74,7 +74,7 @@ else
     #if [[ `grep -qi ansible /etc/apt/sources.list` ]] || [ -f /etc/apt/sources.list.d/ansible*.list ]; then
     elif (grep -qi ansible /etc/apt/sources.list) || (ls /etc/apt/sources.list.d/*ansible*.list >/dev/null 2>&1) ; then
         #echo "Ansible repo(s) found within /etc/apt/sources.list*"
-        echo -e 'MANUAL INTERVENTION URGED:\nANSIBLE REPO(S) FOUND WITHIN /etc/apt/sources.list AND/OR /etc/apt/sources.list.d/*ansible*.list -- MUST CONTAIN LINE "deb http://ppa.launchpad.net/ansible/ansible/ubuntu xenial main" IF YOU WANT THE LATEST ANSIBLE -- AND REMOVE ALL SIMILAR LINES TO ENSURE ANSIBLE UPDATES CLEANLY -- then re-run this script.\n'
+        echo -e 'CONSIDER MANUAL INTERVENTION:\nANSIBLE REPO(S) FOUND WITHIN /etc/apt/sources.list AND/OR /etc/apt/sources.list.d/*ansible*.list -- MUST CONTAIN LINE "deb http://ppa.launchpad.net/ansible/ansible/ubuntu xenial main" IF YOU WANT THE LATEST ANSIBLE -- AND REMOVE ALL SIMILAR LINES TO ENSURE ANSIBLE UPDATES CLEANLY -- then re-run this script.\n'
     else
         echo -e 'Upstream ansible source repo not found:\nPLEASE UNINSTALL ANSIBLE (run "apt purge ansible" or "pip uninstall ansible", depending how Ansible was originally installed) THEN RE-RUN THIS SCRIPT.'
         exit 1

scripts/ansible-2.6.x

@@ -21,7 +21,7 @@ CURR_VER="undefined"
 export DEBIAN_FRONTEND=noninteractive
 
 if [ ! `command -v ansible-playbook` ]; then   # "command -v" is POSIX compliant; also catches built-in commands like "cd"
-    echo "Installing --- Please Wait"
+    echo "scripts/ansible-2.6.x will now try to install Ansible --- Please Wait"
     if [ -f /etc/centos-release ]; then
         yum -y install ca-certificates nss epel-release
         yum -y install git bzip2 file findutils gzip hg svn sudo tar which unzip xz zip libselinux-python
@@ -74,7 +74,7 @@ else
     #if [[ `grep -qi ansible /etc/apt/sources.list` ]] || [ -f /etc/apt/sources.list.d/ansible*.list ]; then
     elif (grep -qi ansible /etc/apt/sources.list) || (ls /etc/apt/sources.list.d/*ansible*.list >/dev/null 2>&1) ; then
         #echo "Ansible repo(s) found within /etc/apt/sources.list*"
-        echo -e 'MANUAL INTERVENTION URGED:\nANSIBLE REPO(S) FOUND WITHIN /etc/apt/sources.list AND/OR /etc/apt/sources.list.d/*ansible*.list -- MUST CONTAIN LINE "deb http://ppa.launchpad.net/ansible/ansible-2.6/ubuntu xenial main" IF YOU WANT THE LATEST ANSIBLE 2.6.x -- AND REMOVE ALL SIMILAR LINES TO ENSURE ANSIBLE UPDATES CLEANLY -- then re-run this script.\n'
+        echo -e 'CONSIDER MANUAL INTERVENTION:\nANSIBLE REPO(S) FOUND WITHIN /etc/apt/sources.list AND/OR /etc/apt/sources.list.d/*ansible*.list -- MUST CONTAIN LINE "deb http://ppa.launchpad.net/ansible/ansible-2.6/ubuntu xenial main" IF YOU WANT THE LATEST ANSIBLE 2.6.x -- AND REMOVE ALL SIMILAR LINES TO ENSURE ANSIBLE UPDATES CLEANLY -- then re-run this script.\n'
     else
         echo -e 'Upstream ansible source repo not found:\nPLEASE UNINSTALL ANSIBLE (run "apt purge ansible" or "pip uninstall ansible", depending how Ansible was originally installed) THEN RE-RUN THIS SCRIPT.'
         exit 1

vars/default_vars.yml

@@ -1,7 +1,7 @@
 # WARNING: DO NOT MODIFY THIS FILE.
 # CHANGES WILL BE LOST IF YOU DO A GIT PULL OR FETCH.
-# Instead put changes in local_vars.yml which is not tracked by git:
-# http://wiki.iiab.io/local_vars.yml
+# Instead put changes in your own /etc/iiab/local_vars.yml
+# See http://wiki.iiab.io/local_vars.yml to learn more!
 
 # By convention we use True/False to indicate boolean constants.
 
@@ -22,6 +22,7 @@ download_timeout: 200
 
 # Configuration File(s)
 iiab_config_file: /etc/iiab/iiab.ini
+iiab_local_vars_file: /etc/iiab/local_vars.yml
 service_filelist: "{{ iiab_config_file }}"
 
 # The following variable may be useful in debugging
@@ -64,7 +65,7 @@ lan_netmask: 255.255.224.0
 # Internal Wi-Fi Access Point
 # Values are used if there is an internal Wi-Fi adapter and hostapd is enabled
 # The platform variable adapts install to specific hardware (raspberry pi=rpi2)
-# Raspbian req WiFi country since March 2018.  CHANGE IT IN vars/local_vars.yml
+# Raspbian req WiFi country since March 2018.  CHANGE IT IN /etc/iiab/local_vars.yml
 host_country_code: US
 host_ssid: "Internet in a Box"
 host_wifi_mode: g
@@ -109,6 +110,7 @@ block_DNS: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable in local_vars.yml AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # For @tim-moody's Nodogsplash approach to Captive Portal?  High experimental as of June 2018: github.com/iiab/iiab/issues/608
@@ -193,15 +195,15 @@ openvpn_enabled: False
 # roles/network runs here (MANY SETTINGS ABOVE)
 
 # Homepage
-# Default to the GUI where the selection is made or override in local_vars.yml
 iiab_home_url: /home
 
-# You can change iiab_home_url in local_vars.yml in order to get a different
-# homepage.  For example one of the following: (assuming they are enabled)
+# You can change iiab_home_url in /etc/iiab/local_vars.yml to get a different
+# homepage.  For example one of the following: (if its service is enabled!)
 
 # iiab_home_url: /home
 # iiab_home_url: /wordpress
-# iiab_home_url: /wiki - either dokuwiki or mediawiki
+# iiab_home_url: /wiki      # for dokuwiki
+# iiab_home_url: /mediawiki
 
 # PostgreSQL auto-installed by Moodle &/or Pathagar as nec, no need to touch!
 # roles/1-prep/tasks/computed_vars.yml, roles/4-server-options/tasks/main.yml
@@ -413,9 +415,10 @@ xovis_chart_heading: "My School: Usage Data Visualization"
 # wide to narrow
 is_debuntu: False
 is_ubuntu: False
-is_ubuntu_16: False
 is_ubuntu_18: False
+is_ubuntu_16: False
 is_debian: False
+is_debian_10: False
 is_debian_9: False
 is_debian_8: False
 is_rpi: False

vars/local_vars_big.yml

@@ -1,4 +1,4 @@
-# This is local_vars_big.yml -- copy it to local_vars.yml then...
+# This is local_vars_big.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870

vars/local_vars_big_vpn.yml

@@ -1,4 +1,4 @@
-# This is local_vars_big_vpn.yml -- copy it to local_vars.yml then...
+# This is local_vars_big_vpn.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870

vars/local_vars_medium.yml

@@ -1,4 +1,4 @@
-# This is local_vars_medium.yml -- copy it to local_vars.yml then...
+# This is local_vars_medium.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870

vars/local_vars_medium_vpn.yml

@@ -1,4 +1,4 @@
-# This is local_vars_medium_vpn.yml -- copy it to local_vars.yml then...
+# This is local_vars_medium_vpn.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870

vars/local_vars_min.yml

@@ -1,4 +1,4 @@
-# This is local_vars_min.yml -- copy it to local_vars.yml then...
+# This is local_vars_min.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870

vars/local_vars_min_vpn.yml

@@ -1,4 +1,4 @@
-# This is local_vars_min_vpn.yml -- copy it to local_vars.yml then...
+# This is local_vars_min_vpn.yml -- copy it to /etc/iiab/local_vars.yml then...
 
 # Put variables herein to override /opt/iiab/iiab/vars/default_vars.yml
 
@@ -51,6 +51,7 @@ iiab_gateway_enabled: False
 dnsmasq_install: True
 dnsmasq_enabled: False
 
+# Enable AFTER installing IIAB!  Then run "cd /opt/iiab/iiab; ./iiab-network"
 dns_jail_enabled: False
 
 # Simple python Captive Portal, that @m-anish & @jvonau are experimenting with in July 2018: github.com/iiab/iiab/pull/870