1. When converting RTC to RTMP, it is necessary to synchronize the audio
and video timestamps. When the synchronization status changes, whether
it is unsynchronized or synchronized, print logs to facilitate
troubleshooting of such issues.
2. Chrome uses the STAP-A packet, which means a single RTP packet
contains SPS/PPS information. OBS WHIP, on the other hand, sends SPS and
PPS in separate RTP packets. Therefore, SPS and PPS are in two
independent RTP packets, and SRS needs to cache these two packets.
---------
Co-authored-by: john <hondaxiao@tencent.com>
HLS typically has a delay of around 30 seconds, roughly comprising three
segments, each lasting 10 seconds. We can reduce the delay to about 5
seconds by lowering the segment duration to 2 seconds and starting
playback from the last segment, achieving a stable delay.
Of course, this requires setting the OBS's GOP to 1 second, and the
profile to baseline, preset to fast, and tune to zerolatency.
Additionally, updating a few configurations in the hls.js player is
necessary, such as setting it to start playback from the last segment,
setting the maximum buffer, and initiating accelerated playback to
reduce latency.
---------
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
Co-authored-by: john <hondaxiao@tencent.com>
Checking the HTTPS API or UDP connectivity for WHIP tests can be
difficult. For example, if the UDP port isn't available but the API is
fine, OBS only says it can't connect to the server. It's hard to see the
HTTPS API response or check if the UDP port is available.
This feature lets you set the ice username and password in SRS. You can
then send a STUN request using nc and see the response, making it easier
to check UDP port connectivity.
1. Use curl to test the WHIP API, including ice-frag and ice-pwd
queries.
2. Use nc to send a STUN binding request to test UDP connectivity.
3. If both the API and UDP are working, you should get a STUN response.
---------
Co-authored-by: john <hondaxiao@tencent.com>
When the srs have multiple pps in hevc.the srs can't parse for this.
problem fixed this #3604
---------
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
Co-authored-by: john <hondaxiao@tencent.com>
ISO_IEC_14496-10-AVC-2012.pdf, page 65
7.4.1.1 Encapsulation of an SODB within an RBSP (informative)
... 00 00 03 xx, the 03 byte should be drop where xx represents any 2
bit pattern: 00, 01, 10, or 11.
---------
Co-authored-by: john <hondaxiao@tencent.com>
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
Co-authored-by: winlin <winlin@vip.126.com>
When accessing the SRS Stack, you should log in and use a token for each
request, or utilize the HTTP API with a secret Bearer token included in
every request. The SRS Stack HTTP API proxies both /api/v1 and /rtc/v1
to the SRS HTTP API while ensuring secure authentication. Additionally,
there is a console in the SRS Stack that requires the same token to
request the SRS Stack HTTP API, which is then proxied to the SRS HTTP
API.
The SRS Stack runs SRS with the HTTP API listening at 127.0.0.1:1985 on
the local loopback interface, allowing only the SRS Stack to access it
without authentication. All other users must login and access the SRS
Stack through its interface, rather than directly accessing the SRS HTTP
API within the SRS Stack.
---------
Co-authored-by: panda <542638787@qq.com>
remove unreachable links by python scripts:
```
def is_delete_issue(link):
try:
response = requests.get(link)
except RequestException as e:
print(f"An error occurred while trying to get the link: {e}")
return False
return "This issue has been deleted." in response.text
def remove_unreachable_links(dir):
string_to_search = re.compile(r'// @see https://github\.com/ossrs/srs/issues/.*')
file_list = util.find_files_with_extension(dir, ".cpp", True)
for file in file_list:
lines = []
with open(file, "r", encoding="utf-8") as f:
lines = f.readlines()
with open(file, "w", encoding="utf-8", newline="\n") as f:
for line in lines:
if string_to_search.search(line):
result = re.search(r'https://github\.com/ossrs/srs/issues/\d+', line)
if result:
link = result.group()
if is_delete_issue(link):
print("is_delete_issue link: file: %s, line: %s" % (file, line))
continue
f.write(line)
if __name__ == "__main__":
remove_unreachable_links("srs/trunk/src/")
```
* RTMP: Support enhanced RTMP specification for HEVC, v6.0.42.
* Player: Upgrade mpegts.js to support it.
Enhanced RTMP specification: https://github.com/veovera/enhanced-rtmp
First, start SRS `v6.0.42+` with HTTP-TS support:
```bash
./objs/srs -c conf/http.ts.live.conf
```
Then, you can use [OBS 29.1+](https://github.com/obsproject/obs-studio/releases) to push HEVC via RTMP.
Start OBS with the following settings in the `Settings > Stream` tab:
* Server: `rtmp://localhost/live`
* Stream Key: `livestream`
* Encoder: Please select the HEVC hardware encoder.
Finally, open the player http://localhost:8080/players/srs_player.html?stream=livestream.ts
Or use VLS or ffplay to play `http://localhost:8080/live/livestream.ts`
---------
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
For some use scenario, the publisher is invited when player want to view the stream:
1. Publisher connect to system, but does not publish any stream to SRS yet.
2. Player connect to system and start to request the stream.
3. System notifies publisher to publish stream to SRS.
4. Player play the stream from SRS.
Please notice that `system` means your business system, not SRS.
This is what we called `on-demand-live-streaming`, so when the last player stop to view the stream, what happends?
1. System needs to notify publisher to stop publish.
2. Or, SRS disconnect the publisher when idle(the last player stops playing).
This PR is for the solution 2, so that the cleanup is very simple, your system does not need to notify publisher to stop publish, because SRS has already disconnected the publihser.
---------
Co-authored-by: winlin <winlin@vip.126.com>
Co-authored-by: chundonglinlin <chundonglinlin@163.com>
1. SRT: Fix srt to rtmp crash when sps or pps empty. v5.0.112 (#3323)
2. GB28181: Fix memory overlap for small packets. v5.0.111 (#3315)
3. FLV: Support set default has_av and disable guessing. v5.0.110 (#3311)
4. FLV: Drop packet if header flag is not matched. v5.0.109 (#3306)
5. FLV: Reset has_audio or has_video if only sequence header. (#3310)
1. Ignore audo or video packets if FLV header disable it.
2. Run: Add regression test config and run for IDEA.
3. Test: Refine regression test to allow no audio/video for FLV
4. Config: Whether drop packet if not match header.
* Add utc time utility
* Fix calculate duration in fmp4
* Refine dash code, use segment template timeline
* Shrink m4s file and cleanup
* Support play by dash.js
* Use SegmentTemplate timeline mode with $Number$
Co-authored-by: winlin <winlin@vip.126.com>
* Add utc time utility
* Fix calculate duration in fmp4
* Refine dash code, use segment template timeline
* Shrink m4s file and cleanup
* Support play by dash.js
* Use SegmentTemplate timeline mode with $Number$
Co-authored-by: winlin <winlin@vip.126.com>
1. Parse video codec from PSM packet.
2. Return error and logging if HEVC packet.
3. Ignore invalid AVC NALUs, drop AVC AUD and SEI.
4. Disconnect TCP connection if HEVC.
1. Parse video codec from PSM packet.
2. Return error and logging if HEVC packet.
3. Ignore invalid AVC NALUs, drop AVC AUD and SEI.
4. Disconnect TCP connection if HEVC.
1. Update TS video codec to HEVC during streaming.
2. Return error when HEVC is disabled.
3. Parse HEVC NALU type by SrsHevcNaluTypeParse.
4. Show message when codec change for TS.
Co-authored-by: runner365 <shi.weibd@hotmail.com>
1. Support configure with --h265=on.
2. Parse HEVC(H.265) from FLV or RTMP packet.
3. Support HEVC over RTMP or HTTP-FLV.
Co-authored-by: runner365 <shi.weibd@hotmail.com>
1. Support cygwin by '--cygwin64=on'
2. Detect cygwin automatically.
3. Disalbe sanitizer, srt and srtp with openssl.
4. Disable multiple threads, use single threads.
5. Support utest for cygwin64.
6. Query features for windows by API.
7. Disable stat APIs for cygwin.
8. Use ST select event driver.
Co-authored-by: wenjie.zhao <740936897@qq.com>
* MP4: Fix memory leak when error.
* Kernel: Support free global objects for utest.
* HTTP: Fix memory leak when error.
* MP4: Support more sample rate for audio.
* RTMP: Support free field for utest.
* UTest: Support address sanitizer.
