Remove from luci packages some files that can work without luci interface

luci-app-omr-bypass/Makefile

@@ -7,11 +7,11 @@ include $(TOPDIR)/rules.mk
 
 LUCI_TITLE:=LuCI Interface to bypass domains
 #LUCI_DEPENDS:=+dnsmasq-full +shadowsocks-libev-ss-rules +(LINUX_5_4||LINUX_5_15||TARGET_x86_64):iptables-mod-ndpi +iptables-mod-extra +(LINUX_5_4||LINUX_5_15||TARGET_x86_64):kmod-ipt-ndpi +iptables
-LUCI_DEPENDS:=+dnsmasq-full +shadowsocks-libev-ss-rules +iptables-mod-extra +iptables +sqlite3-cli
-ifneq ($(CONFIG_TARGET_ramips),y)
-	#LUCI_DEPENDS+=+(LINUX_5_4||LINUX_5_15):iptables-mod-ndpi +(LINUX_5_4||LINUX_5_15):kmod-ipt-ndpi
-	LUCI_DEPENDS+=+iptables-mod-ndpi +kmod-ipt-ndpi
-endif
+LUCI_DEPENDS:=+omr-bypass
+#ifneq ($(CONFIG_TARGET_ramips),y)
+#	#LUCI_DEPENDS+=+(LINUX_5_4||LINUX_5_15):iptables-mod-ndpi +(LINUX_5_4||LINUX_5_15):kmod-ipt-ndpi
+#	LUCI_DEPENDS+=+iptables-mod-ndpi +kmod-ipt-ndpi
+#endif
 
 
 PKG_LICENSE:=GPLv3

luci-app-openmptcprouter/Makefile

@@ -6,7 +6,7 @@
 include $(TOPDIR)/rules.mk
 
 LUCI_TITLE:=LuCI Support for OpenMPTCProuter
-LUCI_DEPENDS:=+luci-lib-json +curl +bind-dig +tracebox
+LUCI_DEPENDS:=+luci-lib-json +openmptcprouter-api
 PKG_LICENSE:=GPLv3
 
 #include ../luci/luci.mk

luci-app-sqm-autorate/Makefile

@@ -6,9 +6,9 @@ include $(TOPDIR)/rules.mk
 LUCI_TITLE:=LuCI Support for SQM Scripts with autorate
 LUCI_DESCRIPTION:=Luci interface for the SQM scripts queue management package with SQM autorate
 
-PKG_MAINTAINER:=Toke Høiland-Jørgensen <toke@toke.dk>
+PKG_MAINTAINER:=Yannick Chabanoois <contact@openmptcprouter.com>
 
-LUCI_DEPENDS:=+sqm-scripts +bash +tsping
+LUCI_DEPENDS:=+sqm-scripts +sqm-autorate
 LUCI_PKGARCH:=all
 
 include $(TOPDIR)/feeds/luci/luci.mk

omr-bypass/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2018-2023 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=omr-bypass
+PKG_VERSION:=0.1
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+SECTION:=net
+CATEGORY:=Network
+DEPENDS:=+curl +dnsmasq-full +sqlite3-cli +iptables +iptables-mod-extra
+TITLE:=OMR-ByPass
+endef
+
+define Package/$(PKG_NAME)/description
+OMR-ByPass
+endef
+
+define Build/Compile
+endef
+
+define Package/$(PKG_NAME)/install
+    $(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

openmptcprouter-api/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2018-2023 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=openmptcprouter-api
+PKG_VERSION:=0.1
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+SECTION:=OMR
+CATEGORY:=OpenMPTCProuter
+DEPENDS:=+tracebox +bind-dig +curl
+TITLE:=OpenMPTCProuter API
+endef
+
+define Package/$(PKG_NAME)/description
+OpenMPTCProuter API package
+endef
+
+define Build/Compile
+endef
+
+define Package/$(PKG_NAME)/install
+    $(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

openmptcprouter-api/files/usr/share/luci/menu.d/luci-app-openmptcprouter.json

@@ -0,0 +1,13 @@
+{
+	"admin/system/openmptcprouter": {
+		"title": "OpenMPTCProuter",
+		"order": 1,
+		"action": {
+			"type": "template",
+			"path": "openmptcprouter/wizard"
+		},
+		"depends": {
+			"acl": [ "luci-app-openmptcprouter" ]
+		}
+	}
+}

openmptcprouter-api/files/usr/share/rpcd/acl.d/luci-app-openmptcprouter.json

@@ -0,0 +1,14 @@
+{
+    "luci-app-openmptcprouter": {
+	"description": "Grant UCI access for luci-app-openmptcprouter",
+	"read": {
+	    "uci": [ "*" ],
+	    "ubus": {
+		"openmptcprouter": [ "*" ]
+	    }
+	},
+	"write": {
+	    "uci": [ "*" ]
+	}
+    }
+}

sqm-autorate/Makefile

@@ -0,0 +1,34 @@
+#
+# Copyright (C) 2018-2023 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=sqm-autorate
+PKG_VERSION:=0.1
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/$(PKG_NAME)
+SECTION:=net
+CATEGORY:=Network
+DEPENDS:=+bash +tsping
+TITLE:=SQM Autorate
+endef
+
+define Package/$(PKG_NAME)/description
+SQM Autorate
+endef
+
+define Build/Compile
+endef
+
+define Package/$(PKG_NAME)/install
+    $(CP) ./files/* $(1)/
+endef
+
+$(eval $(call BuildPackage,$(PKG_NAME)))

sqm-autorate/files/usr/share/sqm-autorate/defaults.sh.anc

@@ -0,0 +1,209 @@
+#!/bin/bash
+
+# cake-autorate automatically adjusts bandwidth for CAKE in dependence on detected load and RTT
+
+# cake-autorate_config.sh is a script that sets up defaults for cake-autorate
+
+# Author: @Lynx (OpenWrt forum)
+# Inspiration taken from: @moeller0 (OpenWrt forum)
+
+INTERFACE=""
+
+# *** OUTPUT AND LOGGING OPTIONS ***
+
+output_processing_stats=1 	# enable (1) or disable (0) output monitoring lines showing processing stats
+output_load_stats=1       	# enable (1) or disable (0) output monitoring lines showing achieved loads
+output_reflector_stats=1  	# enable (1) or disable (0) output monitoring lines showing reflector stats
+output_cake_changes=0     	# enable (1) or disable (0) output monitoring lines showing cake bandwidth changes
+debug=1 		  	# enable (1) or disable (0) out of debug lines
+
+# This can generate a LOT of records so be careful:
+log_DEBUG_messages_to_syslog=0	# enable (1) or disable (0) logging of all DEBUG records into the system log. 
+
+# ** Take care with these settings to ensure you won't run into OOM issues on your router ***
+# every write the cumulative write time and bytes associated with each log line are checked
+# and if either exceeds the configured values below, the log log file is rotated
+log_to_file=1              # enable (1) or disable (0) output logging to file (/tmp/cake-autorate.log)
+log_file_max_time_mins=10  # maximum time between log file rotations
+log_file_max_size_KB=2000  # maximum KB (i.e. bytes/1024) worth of log lines between log file rotations
+
+# log file path defaults to /var/log/
+# or, if set below, then ${log_file_path_override}
+log_file_path_override=""
+
+# *** STANDARD CONFIGURATION OPTIONS ***
+
+### For multihomed setups, it is the responsibility of the user to ensure that the probes 
+### sent by this instance of cake-autorate actually travel through these interfaces.
+### See ping_extra_args and ping_prefix_string
+
+dl_if=ifb-wan # download interface
+ul_if=wan     # upload interface
+
+# pinger selection can be any of:
+# fping - round robin pinging (rtts)
+# ping - (iputils-ping) individual pinging (rtts)
+# hping3 - individidual pinging (owds)
+pinger_binary=fping
+
+# list of reflectors to use and number of pingers to initiate
+# pingers will be initiated with reflectors in the order specified in the list 
+# additional reflectors will be used to replace any reflectors that go stale
+# so e.g. if 6 reflectors are specified and the number of pingers is set to 4, the first 4 reflectors will be used initially
+# and the remaining 2 reflectors in the list will be used in the event any of the first 4 go bad
+# a bad reflector will go to the back of the queue on reflector rotation
+reflectors=(
+"1.1.1.1" "1.0.0.1"  # Cloudflare
+"8.8.8.8" "8.8.4.4"  # Google
+"9.9.9.9" "9.9.9.10" "9.9.9.11" # Quad9
+"94.140.14.15" "94.140.14.140" "94.140.14.141" "94.140.15.15" "94.140.15.16" # AdGuard
+"64.6.65.6" "156.154.70.1" "156.154.70.2" "156.154.70.3" "156.154.70.4" "156.154.70.5" "156.154.71.1" "156.154.71.2" "156.154.71.3" "156.154.71.4" "156.154.71.5" # Neustar
+"208.67.220.2" "208.67.220.123" "208.67.220.220" "208.67.222.2" "208.67.222.123" # OpenDNS
+"185.228.168.9" "185.228.168.10" # CleanBrowsing
+)
+
+randomize_reflectors=1 # enable (1) or disable (0) randomization of reflectors on startup
+
+# Think carefully about the following settings
+# to avoid excessive CPU use (proportional with ping interval / number of pingers)
+# and to avoid abusive network activity (excessive ICMP frequency to one reflector)
+# The author has found an ICMP rate of 1/(0.2/4) = 20 Hz to give satisfactory performance on 4G
+no_pingers=6 # number of pingers to maintain
+reflector_ping_interval_s=0.3 # (seconds, e.g. 0.2s or 2s)
+
+# delay threshold in ms is the extent of OWD increase to classify as a delay
+# these are automatically adjusted based on maximum on the wire packet size
+# (adjustment significant at sub 12Mbit/s rates, else negligible)  
+dl_delay_thr_ms=30 # (milliseconds)
+ul_delay_thr_ms=30 # (milliseconds)
+
+# Set either of the below to 0 to adjust one direction only 
+# or alternatively set both to 0 to simply use cake-autorate to monitor a connection
+adjust_dl_shaper_rate=1 # enable (1) or disable (0) actually changing the dl shaper rate
+adjust_ul_shaper_rate=1 # enable (1) or disable (0) actually changing the ul shaper rate
+
+min_dl_shaper_rate_kbps=5000  # minimum bandwidth for download (Kbit/s)
+base_dl_shaper_rate_kbps=20000 # steady state bandwidth for download (Kbit/s)
+max_dl_shaper_rate_kbps=80000  # maximum bandwidth for download (Kbit/s)
+
+min_ul_shaper_rate_kbps=5000  # minimum bandwidth for upload (Kbit/s)
+base_ul_shaper_rate_kbps=20000 # steady state bandwidth for upload (KBit/s)
+max_ul_shaper_rate_kbps=35000  # maximum bandwidth for upload (Kbit/s)
+
+# sleep functionality saves unecessary pings and CPU cycles by
+# pausing all active pingers when connection is not in active use
+enable_sleep_function=1 # enable (1) or disable (0) sleep functonality 
+connection_active_thr_kbps=1000  # threshold in Kbit/s below which dl/ul is considered idle
+sustained_idle_sleep_thr_s=60.0  # time threshold to put pingers to sleep on sustained dl/ul achieved rate < idle_thr (seconds)
+
+min_shaper_rates_enforcement=0 # enable (1) or disable (0) dropping down to minimum shaper rates on connection idle or stall
+
+startup_wait_s=0.0 # number of seconds to wait on startup (e.g. to wait for things to settle on router reboot)
+
+# *** ADVANCED CONFIGURATION OPTIONS ***
+
+log_file_export_compress=1 # compress log file exports using gzip and append .gz to export filename
+
+### In multi-homed setups, it is mandatory to use either ping_extra_args
+### or ping_prefix_string to direct the pings through $dl_if and $ul_if.
+### No universal recommendation exists, because there are multiple
+### policy-routing packages available (e.g. vpn-policy-routing and mwan3).
+### Typically they either react to a firewall mark set on the pings, or
+### provide a convenient wrapper.
+###
+### In a traditional single-homed setup, there is usually no need for these parameters.
+###
+### These arguments can also be used for any other purpose - e.g. for setting a
+### particular QoS mark.
+
+# extra arguments for ping or fping
+# e.g., here is how you can set the correct outgoing interface and
+# the firewall mark for ping:
+# ping_extra_args="-I wwan0 -m $((0x300))"
+# Unfortunately, fping does not offer a command line switch to set
+# the firewall mark.
+# WARNING: no error checking so use at own risk!
+ping_extra_args=""
+
+# a wrapper for ping binary - used as a prefix for the real command
+# e.g., when using mwan3, it is recommended to set it like this:
+# ping_prefix_string="mwan3 use gpon exec"
+# WARNING: the wrapper must exec ping as the final step, not run it as a subprocess.
+# Running ping or fping as a subprocess will lead to problems stopping it.
+# WARNING: no error checking - so use at own risk!
+ping_prefix_string=""
+
+# interval in ms for monitoring achieved rx/tx rates
+# this is automatically adjusted based on maximum on the wire packet size
+# (adjustment significant at sub 12Mbit/s rates, else negligible)  
+monitor_achieved_rates_interval_ms=200 # (milliseconds) 
+
+# bufferbloat is detected when (bufferbloat_detection_thr) samples
+# out of the last (bufferbloat detection window) samples are delayed
+bufferbloat_detection_window=6   # number of samples to retain in detection window
+bufferbloat_detection_thr=3      # number of delayed samples for bufferbloat detection
+
+# OWD baseline against which to measure delays
+# the idea is that the baseline is allowed to increase slowly to allow for path changes
+# and slowly enough such that bufferbloat will be corrected well before the baseline increases,
+# but it will decrease very rapidly to ensure delays are measured against the shortest path
+alpha_baseline_increase=0.001  # how rapidly baseline RTT is allowed to increase
+alpha_baseline_decrease=0.9  # how rapidly baseline RTT is allowed to decrease
+
+# OWD delta from baseline is tracked using ewma with alpha set below
+alpha_delta_ewma=0.095
+
+# rate adjustment parameters 
+# bufferbloat adjustment works with the lower of the adjusted achieved rate and adjusted shaper rate
+# to exploit that transfer rates during bufferbloat provide an indication of line capacity
+# otherwise shaper rate is adjusted up on load high, and down on load idle or low
+achieved_rate_adjust_down_bufferbloat=0.9 # how rapidly to reduce achieved rate upon detection of bufferbloat 
+shaper_rate_adjust_down_bufferbloat=0.9   # how rapidly to reduce shaper rate upon detection of bufferbloat 
+shaper_rate_adjust_up_load_high=1.01      # how rapidly to increase shaper rate upon high load detected 
+shaper_rate_adjust_down_load_low=0.99     # how rapidly to return down to base shaper rate upon idle or low load detected 
+shaper_rate_adjust_up_load_low=1.01       # how rapidly to return up to base shaper rate upon idle or low load detected 
+
+# the load is categoried as low if < high_load_thr and high if > high_load_thr relative to the current shaper rate
+high_load_thr=0.75   # % of currently set bandwidth for detecting high load
+
+# refractory periods between successive bufferbloat/decay rate changes
+# the bufferbloat refractory period should be greater than the 
+# average time it would take to replace the bufferbloat
+# detection window with new samples upon a bufferbloat event
+bufferbloat_refractory_period_ms=300 # (milliseconds)
+decay_refractory_period_ms=1000 # (milliseconds)
+
+# interval for checking reflector health
+reflector_health_check_interval_s=1.0 # (seconds)
+# deadline for reflector response not to be classified as an offence against reflector
+reflector_response_deadline_s=1.0 # (seconds)
+
+# reflector misbehaving is detected when $reflector_misbehaving_detection_thr samples
+# out of the last (reflector misbehaving detection window) samples are offences
+# thus with a 1s interval, window 60 and detection_thr 3, this is tantamount to
+# 3 offences within the last 60s 
+reflector_misbehaving_detection_window=60
+reflector_misbehaving_detection_thr=3
+
+reflector_replacement_interval_mins=60 # how often to replace a random reflector from the present list
+
+reflector_comparison_interval_mins=1		# how often to compare reflectors 
+reflector_sum_owd_baselines_delta_thr_ms=20	# max increase from min sum owd baselines before reflector rotated
+reflector_owd_delta_ewma_delta_thr_ms=10	# max increase from min delta ewma before reflector rotated
+
+# stall is detected when the following two conditions are met:
+# 1) no reflector responses within $stall_detection_thr*$ping_response_interval_us; and
+# 2) either $rx_achieved_rate or $tx_achieved_rate < $connection_stall_thr
+stall_detection_thr=5
+connection_stall_thr_kbps=10
+
+global_ping_response_timeout_s=10 # timeout to set shaper rates to min on no ping response whatsoever (seconds)
+
+if_up_check_interval_s=10.0 # time to wait before re-checking if rx/tx bytes files exist (e.g. from boot state or sleep recovery)
+
+# Starlink satellite switch (sss) compensation options
+sss_compensation=0 # enable (1) or disable (0) Starlink handling
+# satellite switch compensation start times in seconds of each minute
+sss_times_s=("12.0" "27.0" "42.0" "57.0")
+sss_compensation_pre_duration_ms=300
+sss_compensation_post_duration_ms=200