fix

libmbim/Makefile

@@ -1,95 +0,0 @@
-#
-# Copyright (C) 2016 Velocloud Inc.
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libmbim
-PKG_VERSION:=1.26.2
-PKG_RELEASE:=$(AUTORELEASE)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=https://www.freedesktop.org/software/libmbim
-PKG_HASH:=10c77bf5b5eb8c92ba80e9b519923ad9b898362bc8e1928e2bc9a17eeba649af
-
-PKG_MAINTAINER:=Nicholas Smith <nicholas@nbembedded.com>
-
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-CONFIGURE_ARGS += \
-	--disable-static \
-	--disable-gtk-doc \
-	--disable-gtk-doc-html \
-	--disable-gtk-doc-pdf \
-	--disable-silent-rules \
-	--enable-more-warnings=yes
-
-define Package/libmbim
-  SECTION:=libs
-  CATEGORY:=Libraries
-  DEPENDS:=+glib2
-  TITLE:=Helper library and utils to talk to MBIM enabled modems
-  URL:=https://www.freedesktop.org/wiki/Software/libmbim
-  LICENSE:=LGPL-2.0-or-later
-  LICENSE_FILES:=COPYING.LIB
-endef
-
-define Package/libmbim/description
-  Helper library to talk to MBIM enabled modems.
-  Add mbim-utils for extra utilities.
-endef
-
-define Package/mbim-utils
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libmbim
-  TITLE:=Utilities to talk to MBIM enabled modems
-  URL:=https://www.freedesktop.org/wiki/Software/libmbim
-  LICENSE:=GPL-2.0-or-later
-  LICENSE_FILES:=COPYING
-endef
-
-CONFIGURE_ARGS += \
-	--without-udev \
-	--without-udev-base-dir
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/include/libmbim-glib \
-		$(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libmbim*.so* \
-		$(1)/usr/lib/
-
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/pkgconfig/mbim-glib.pc \
-		$(1)/usr/lib/pkgconfig
-endef
-
-define Package/libmbim/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libmbim*.so.* \
-		$(1)/usr/lib/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/mbim-proxy $(1)/usr/lib/
-endef
-
-define Package/mbim-utils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mbimcli $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mbim-network $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,libmbim))
-$(eval $(call BuildPackage,mbim-utils))

libqmi/Config.in

@@ -1,16 +0,0 @@
-menu "Configuration"
-	depends on PACKAGE_libqmi
-
-config LIBQMI_WITH_MBIM_QMUX
-	bool "Include MBIM QMUX service support"
-	default y
-	help
-	  Compile libqmi with QMI-over-MBIM support
-
-config LIBQMI_WITH_QRTR_GLIB
-	bool "Include QRTR support"
-	default y
-	help
-	  Compile libqmi with QRTR support
-
-endmenu

libqmi/Makefile

@@ -1,119 +0,0 @@
-#
-# Copyright (C) 2016 Velocloud Inc.
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=libqmi
-PKG_VERSION:=1.30.4
-PKG_RELEASE:=$(AUTORELEASE)
-
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=https://www.freedesktop.org/software/libqmi
-PKG_HASH:=00d7da30a4f8d1185f37cba289cfaf1dfcd04a58f2f76d6acfdf5b85312d6ed6
-
-PKG_MAINTAINER:=Nicholas Smith <nicholas@nbembedded.com>
-
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-define Package/libqmi/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/libqmi
-  SECTION:=libs
-  CATEGORY:=Libraries
-  DEPENDS:= \
-    +glib2 \
-    +LIBQMI_WITH_MBIM_QMUX:libmbim \
-    +LIBQMI_WITH_QRTR_GLIB:libqrtr-glib
-  TITLE:=Helper library to talk to QMI enabled modems
-  URL:=https://www.freedesktop.org/wiki/Software/libqmi
-  LICENSE:=LGPL-2.0-or-later
-  LICENSE_FILES:=COPYING.LIB
-endef
-
-define Package/libqmi/description
-  Helper library talk to QMI enabled modems.
-  Add qmi-utils for extra utilities.
-endef
-
-define Package/qmi-utils
-  SECTION:=utils
-  CATEGORY:=Utilities
-  DEPENDS:=+libqmi
-  TITLE:=Utilities to talk to QMI enabled modems
-  URL:=https://www.freedesktop.org/wiki/Software/libqmi
-  LICENSE:=GPL-2.0-or-later
-  LICENSE_FILES:=COPYING
-endef
-
-define Package/libqmi-utils/description
-  Utils to talk to QMI enabled modems
-endef
-
-CONFIGURE_ARGS += \
-	--disable-static \
-	--disable-gtk-doc \
-	--disable-gtk-doc-html \
-	--disable-gtk-doc-pdf \
-	--disable-silent-rules \
-	--enable-firmware-update \
-	--enable-more-warnings=yes \
-	--without-udev \
-	--without-udev-base-dir
-
-ifeq ($(CONFIG_LIBQMI_WITH_MBIM_QMUX),y)
-	CONFIGURE_ARGS += --enable-mbim-qmux
-else
-	CONFIGURE_ARGS += --disable-mbim-qmux
-endif
-
-ifeq ($(CONFIG_LIBQMI_WITH_QRTR_GLIB),y)
-	CONFIGURE_ARGS += --enable-qrtr
-else
-	CONFIGURE_ARGS += --disable-qrtr
-endif
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/include/libqmi-glib \
-		$(1)/usr/include/
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libqmi*.so* \
-		$(1)/usr/lib/
-
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/pkgconfig/qmi-glib.pc \
-		$(1)/usr/lib/pkgconfig
-endef
-
-define Package/libqmi/install
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) \
-		$(PKG_INSTALL_DIR)/usr/lib/libqmi*.so.* \
-		$(1)/usr/lib/
-
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/lib/qmi-proxy $(1)/usr/lib/
-endef
-
-define Package/qmi-utils/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/qmicli $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/qmi-network $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/qmi-firmware-update $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,libqmi))
-$(eval $(call BuildPackage,qmi-utils))

luci-proto-mbim/Makefile

@@ -1,14 +0,0 @@
-#
-# Copyright (C) 2008-2014 The LuCI Team <luci@lists.subsignal.org>
-#
-# This is free software, licensed under the Apache License, Version 2.0 .
-#
-
-include $(TOPDIR)/rules.mk
-
-LUCI_TITLE:=Support for MBIM
-LUCI_DEPENDS:=+umbim
-
-include $(TOPDIR)/feeds/luci/luci.mk
-
-# call BuildPackage - OpenWrt buildroot signature

luci-proto-mbim/htdocs/luci-static/resources/protocol/mbim.js

@@ -1,100 +0,0 @@
-'use strict';
-'require rpc';
-'require form';
-'require network';
-
-var callFileList = rpc.declare({
-	object: 'file',
-	method: 'list',
-	params: [ 'path' ],
-	expect: { entries: [] },
-	filter: function(list, params) {
-		var rv = [];
-		for (var i = 0; i < list.length; i++)
-			if (list[i].name.match(/^cdc-wdm/))
-				rv.push(params.path + list[i].name);
-		return rv.sort();
-	}
-});
-
-network.registerPatternVirtual(/^mbim-.+$/);
-
-return network.registerProtocol('mbim', {
-	getI18n: function() {
-		return _('MBIM Cellular');
-	},
-
-	getIfname: function() {
-		return this._ubus('l3_device') || 'mbim-%s'.format(this.sid);
-	},
-
-	getOpkgPackage: function() {
-		return 'umbim';
-	},
-
-	isFloating: function() {
-		return true;
-	},
-
-	isVirtual: function() {
-		return true;
-	},
-
-	getDevices: function() {
-		return null;
-	},
-
-	containsDevice: function(ifname) {
-		return (network.getIfnameOf(ifname) == this.getIfname());
-	},
-
-	renderFormOptions: function(s) {
-		var dev = this.getL3Device() || this.getDevice(), o;
-
-		o = s.taboption('general', form.Value, 'device', _('Modem device'));
-		o.rmempty = false;
-		o.load = function(section_id) {
-			return callFileList('/dev/').then(L.bind(function(devices) {
-				for (var i = 0; i < devices.length; i++)
-					this.value(devices[i]);
-				return form.Value.prototype.load.apply(this, [section_id]);
-			}, this));
-		};
-
-		s.taboption('general', form.Value, 'apn', _('APN'));
-		s.taboption('general', form.Value, 'pincode', _('PIN'));
-
-		o = s.taboption('general', form.ListValue, 'auth', _('Authentication Type'));
-		o.value('both', 'PAP/CHAP');
-		o.value('pap', 'PAP');
-		o.value('chap', 'CHAP');
-		o.value('none', 'NONE');
-		o.default = 'none';
-
-		o = s.taboption('general', form.Value, 'username', _('PAP/CHAP username'));
-		o.depends('auth', 'pap');
-		o.depends('auth', 'chap');
-		o.depends('auth', 'both');
-
-		o = s.taboption('general', form.Value, 'password', _('PAP/CHAP password'));
-		o.depends('auth', 'pap');
-		o.depends('auth', 'chap');
-		o.depends('auth', 'both');
-		o.password = true;
-
-		if (L.hasSystemFeature('ipv6')) {
-			o = s.taboption('advanced', form.Flag, 'ipv6', _('Enable IPv6 negotiation'));
-			o.default = o.disabled;
-		}
-
-		o = s.taboption('advanced', form.Value, 'delay', _('Modem init timeout'), _('Maximum amount of seconds to wait for the modem to become ready'));
-		o.placeholder = '10';
-		o.datatype    = 'min(1)';
-
-		o = s.taboption('general', form.ListValue, 'pdptype', _('PDP Type'));
-		o.value('ipv4v6', 'IPv4/IPv6');
-		o.value('ipv4', 'IPv4');
-		o.value('ipv6', 'IPv6');
-		o.default = 'ipv4v6';
-	}
-});

modemmanager/Config.in

@@ -1,21 +0,0 @@
-menu "Configuration"
-depends on PACKAGE_modemmanager
-
-	config MODEMMANAGER_WITH_MBIM
-		bool "Include MBIM support"
-		default y
-		help
-		  Compile ModemManager with MBIM support
-
-	config MODEMMANAGER_WITH_QMI
-		bool "Include QMI support"
-		default y
-		help
-		  Compile ModemManager with QMI support
-
-        config MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS
-                bool "Allow AT commands via DBus"
-                default n
-                help
-                  Compile ModemManager allowing AT commands without debug flag
-endmenu

modemmanager/Makefile

@@ -1,142 +0,0 @@
-#
-# Copyright (C) 2016 Velocloud Inc.
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-#
-# This is free software, licensed under the GNU General Public License v2.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=modemmanager
-PKG_VERSION:=1.18.6
-PKG_RELEASE:=1
-
-PKG_SOURCE:=ModemManager-$(PKG_VERSION).tar.xz
-PKG_SOURCE_URL:=https://www.freedesktop.org/software/ModemManager
-PKG_HASH:=d4f804b31cf504239c5f1d4973c62095c00cba1ee9abb503718dac6d146a470a
-PKG_BUILD_DIR:=$(BUILD_DIR)/ModemManager-$(PKG_VERSION)
-
-PKG_MAINTAINER:=Nicholas Smith <nicholas.smith@telcoantennas.com.au>
-PKG_LICENSE:=GPL-2.0-or-later
-PKG_LICENSE_FILES:=COPYING
-
-PKG_INSTALL:=1
-PKG_BUILD_PARALLEL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/nls.mk
-
-define Package/modemmanager/config
-  source "$(SOURCE)/Config.in"
-endef
-
-define Package/modemmanager
-  SECTION:=net
-  CATEGORY:=Network
-  TITLE:=Control utility for any kind of mobile broadband modem
-  URL:=https://www.freedesktop.org/wiki/Software/ModemManager
-  DEPENDS:= \
-	$(INTL_DEPENDS) \
-	+glib2 \
-	+dbus \
-	+ppp \
-	+MODEMMANAGER_WITH_MBIM:libmbim \
-	+MODEMMANAGER_WITH_QMI:libqmi
-endef
-
-define Package/modemmanager/description
-  ModemManager is a D-Bus-activated service which allows controlling mobile
-  broadband modems. Add kernel modules for your modems as needed.
-  Select Utilities/usb-modeswitch if needed.
-endef
-
-CONFIGURE_ARGS += \
-	--without-polkit \
-	--without-udev \
-	--without-systemdsystemunitdir \
-	--disable-rpath \
-	--disable-gtk-doc
-
-ifeq ($(CONFIG_MODEMMANAGER_WITH_AT_COMMAND_VIA_DBUS),y)
-  CONFIGURE_ARGS += --with-at-command-via-dbus
-endif
-
-ifdef CONFIG_MODEMMANAGER_WITH_MBIM
-  CONFIGURE_ARGS += --with-mbim
-else
-  CONFIGURE_ARGS += --without-mbim
-endif
-
-ifdef CONFIG_MODEMMANAGER_WITH_QMI
-  CONFIGURE_ARGS += --with-qmi
-else
-  CONFIGURE_ARGS += --without-qmi
-endif
-
-define Build/Prepare
-	$(call Build/Prepare/Default)
-	( cd "$(PKG_BUILD_DIR)"; \
-		printf "all:\ninstall:\n" >po/Makefile.in.in; \
-	)
-endef
-
-define Build/InstallDev
-	$(INSTALL_DIR) $(1)/usr/include/ModemManager
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/ModemManager/*.h $(1)/usr/include/ModemManager
-	$(INSTALL_DIR) $(1)/usr/include/libmm-glib
-	$(CP) $(PKG_INSTALL_DIR)/usr/include/libmm-glib/*.h $(1)/usr/include/libmm-glib
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so* $(1)/usr/lib
-	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/ModemManager.pc $(1)/usr/lib/pkgconfig
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/mm-glib.pc $(1)/usr/lib/pkgconfig
-endef
-
-define Package/modemmanager/install
-	$(INSTALL_DIR) $(1)/lib/udev/rules.d
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/lib/udev/rules.d/*.rules $(1)/lib/udev/rules.d
-
-	$(INSTALL_DIR) $(1)/usr/sbin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/sbin/ModemManager $(1)/usr/sbin
-	$(INSTALL_BIN) ./files/usr/sbin/ModemManager-wrapper $(1)/usr/sbin
-
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/mmcli $(1)/usr/bin
-
-	$(INSTALL_DIR) $(1)/usr/lib
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/libmm-glib.so.* $(1)/usr/lib
-
-	$(INSTALL_DIR) $(1)/usr/lib/ModemManager
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-shared-*.so* $(1)/usr/lib/ModemManager
-	$(CP) $(PKG_INSTALL_DIR)/usr/lib/ModemManager/libmm-plugin-*.so* $(1)/usr/lib/ModemManager
-
-	$(INSTALL_DIR) $(1)/etc/dbus-1/system.d
-	$(INSTALL_CONF) $(PKG_INSTALL_DIR)/etc/dbus-1/system.d/org.freedesktop.ModemManager1.conf $(1)/etc/dbus-1/system.d
-
-	$(INSTALL_DIR) $(1)/usr/share/dbus-1/system-services
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/dbus-1/system-services/org.freedesktop.ModemManager1.service $(1)/usr/share/dbus-1/system-services
-
-	$(INSTALL_DIR) $(1)/usr/share/ModemManager
-	$(INSTALL_DATA) $(PKG_INSTALL_DIR)/usr/share/ModemManager/*.conf $(1)/usr/share/ModemManager
-	$(INSTALL_DATA) ./files/modemmanager.common $(1)/usr/share/ModemManager
-
-	$(INSTALL_DIR) $(1)/etc/init.d
-	$(INSTALL_BIN) ./files/modemmanager.init $(1)/etc/init.d/modemmanager
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/usb
-	$(INSTALL_DATA) ./files/25-modemmanager-usb $(1)/etc/hotplug.d/usb
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/net
-	$(INSTALL_DATA) ./files/25-modemmanager-net $(1)/etc/hotplug.d/net
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/tty
-	$(INSTALL_DATA) ./files/25-modemmanager-tty $(1)/etc/hotplug.d/tty
-
-	$(INSTALL_DIR) $(1)/etc/hotplug.d/wwan
-	$(INSTALL_DATA) ./files/25-modemmanager-wwan $(1)/etc/hotplug.d/wwan
-
-	$(INSTALL_DIR) $(1)/lib/netifd/proto
-	$(INSTALL_BIN) ./files/modemmanager.proto $(1)/lib/netifd/proto/modemmanager.sh
-endef
-
-$(eval $(call BuildPackage,modemmanager))

modemmanager/README.md

@@ -1,40 +0,0 @@
-# OpenWrt ModemManager
-
-## Description
-
-Cellular modem control and connectivity
-
-Optional libraries libmbim and libqmi are available.
-Your modem may require additional kernel modules and/or the usb-modeswitch
-package.
-
-## Usage
-
-Once installed, you can configure the 2G/3G/4G modem connections directly in
-/etc/config/network as in the following example:
-
-    config interface 'broadband'
-        option device      '/sys/devices/platform/soc/20980000.usb/usb1/1-1/1-1.2/1-1.2.1'
-        option proto       'modemmanager'
-        option apn         'ac.vodafone.es'
-        option allowedauth 'pap chap'
-        option username    'vodafone'
-        option password    'vodafone'
-        option pincode     '7423'
-        option iptype      'ipv4'
-        option lowpower    '1'
-        option signalrate  '30'
-
-Only 'device' and 'proto' are mandatory options, the remaining ones are all
-optional.
-
-The 'allowedauth' option allows limiting the list of authentication protocols.
-It is given as a space-separated list of values, including any of the
-following: 'pap', 'chap', 'mschap', 'mschapv2' or 'eap'. It will default to
-allowing all protocols.
-
-The 'iptype' option supports any of these values: 'ipv4', 'ipv6' or 'ipv4v6'.
-It will default to 'ipv4' if not given.
-
-The 'signalrate' option set's the signal refresh rate (in seconds) for the device.
-You can call signal info with command: mmcli -m 0 --signal-get

modemmanager/files/25-modemmanager-net

@@ -1,31 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2016 Velocloud Inc
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-
-# Load common utilities
-. /usr/share/ModemManager/modemmanager.common
-
-# We require a interface name
-[ -n "${INTERFACE}" ] || exit
-
-# Always make sure the rundir exists
-mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
-
-# Report network interface
-mm_log "${ACTION} network interface ${INTERFACE}: event processed"
-mm_report_event "${ACTION}" "${INTERFACE}" "net" "/sys${DEVPATH}"
-
-# Look for an associated cdc-wdm interface
-
-cdcwdm=""
-
-case "${ACTION}" in
-	"add")	  cdcwdm=$(mm_track_cdcwdm "${INTERFACE}") ;;
-	"remove") cdcwdm=$(mm_untrack_cdcwdm "${INTERFACE}") ;;
-esac
-
-# Report cdc-wdm device, if any
-[ -n "${cdcwdm}" ] && {
-	mm_log "${ACTION} cdc interface ${cdcwdm}: custom event processed"
-	mm_report_event "${ACTION}" "${cdcwdm}" "usbmisc" "/sys${DEVPATH}"
-}

modemmanager/files/25-modemmanager-tty

@@ -1,16 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2016 Velocloud Inc
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-
-# Load hotplug common utilities
-. /usr/share/ModemManager/modemmanager.common
-
-# We require a device name
-[ -n "$DEVNAME" ] || exit
-
-# Always make sure the rundir exists
-mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
-
-# Report TTY
-mm_log "${ACTION} serial interface ${DEVNAME}: event processed"
-mm_report_event "${ACTION}" "${DEVNAME}" "tty" "/sys${DEVPATH}"

modemmanager/files/25-modemmanager-usb

@@ -1,13 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2019 Aleksander Morgado <aleksander@aleksander.es>
-
-# We need to process only full USB device removal events, we don't
-# want to process specific interface removal events.
-[ "$ACTION" = remove ] || exit
-[ -z "${INTERFACE}" ] || exit
-
-# Load common utilities
-. /usr/share/ModemManager/modemmanager.common
-
-mm_clear_modem_wait_status "/sys${DEVPATH}"
-mm_cleanup_interface_by_sysfspath "/sys${DEVPATH}"

modemmanager/files/25-modemmanager-wwan

@@ -1,15 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2021 Aleksander Morgado <aleksander@aleksander.es>
-
-# Load hotplug common utilities
-. /usr/share/ModemManager/modemmanager.common
-
-# We require a device name
-[ -n "$DEVNAME" ] || exit
-
-# Always make sure the rundir exists
-mkdir -m 0755 -p "${MODEMMANAGER_RUNDIR}"
-
-# Report wwan
-mm_log "${ACTION} wwan control port ${DEVNAME}: event processed"
-mm_report_event "${ACTION}" "${DEVNAME}" "wwan" "/sys${DEVPATH}"

modemmanager/files/modemmanager.common

@@ -1,341 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2016 Velocloud Inc
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-
-################################################################################
-
-. /lib/functions.sh
-. /lib/netifd/netifd-proto.sh
-
-################################################################################
-# Runtime state
-
-MODEMMANAGER_RUNDIR="/var/run/modemmanager"
-MODEMMANAGER_PID_FILE="${MODEMMANAGER_RUNDIR}/modemmanager.pid"
-MODEMMANAGER_CDCWDM_CACHE="${MODEMMANAGER_RUNDIR}/cdcwdm.cache"
-MODEMMANAGER_SYSFS_CACHE="${MODEMMANAGER_RUNDIR}/sysfs.cache"
-MODEMMANAGER_EVENTS_CACHE="${MODEMMANAGER_RUNDIR}/events.cache"
-
-################################################################################
-# Common logging
-
-mm_log() {
-	[ "$(uci -q get openmptcprouter.settings.debug)" = "true" ] && logger -t "ModemManager" "hotplug: $*"
-}
-
-################################################################################
-# Receives as input argument the full sysfs path of the device
-# Returns the physical device sysfs path
-#
-# NOTE: this method only works when the device exists, i.e. it cannot be used
-# on removal hotplug events
-
-mm_find_physdev_sysfs_path() {
-	local tmp_path="$1"
-
-	while true; do
-		tmp_path=$(dirname "${tmp_path}")
-
-		# avoid infinite loops iterating
-		[ -z "${tmp_path}" ] || [ "${tmp_path}" = "/" ] && return
-
-		# for USB devices, the physical device will be that with a idVendor
-		#  and idProduct pair of files
-		[ -f "${tmp_path}"/idVendor ] && [ -f "${tmp_path}"/idProduct ] && {
-			tmp_path=$(readlink -f "$tmp_path")
-			echo "${tmp_path}"
-			return
-		}
-		
-		# For PCI devices, the physical device will be that with a vendor
-		# and device pair of files
-		[ -f "${tmp_path}"/vendor ] && [ -f "${tmp_path}"/device ] && {
-			tmp_path=$(readlink -f "$tmp_path")
-			echo "${tmp_path}"
-			return
-		}
-	done
-}
-
-################################################################################
-
-# Returns the cdc-wdm name retrieved from sysfs
-mm_track_cdcwdm() {
-	local wwan="$1"
-	local cdcwdm
-
-	cdcwdm=$(ls "/sys/class/net/${wwan}/device/usbmisc/")
-	[ -n "${cdcwdm}" ] || return
-
-	# We have to cache it for later, as we won't be able to get the
-	# associated cdc-wdm device on a remove event
-	echo "${wwan} ${cdcwdm}" >> "${MODEMMANAGER_CDCWDM_CACHE}"
-
-	echo "${cdcwdm}"
-}
-
-# Returns the cdc-wdm name retrieved from the cache
-mm_untrack_cdcwdm() {
-	local wwan="$1"
-	local cdcwdm
-
-	# Look for the cached associated cdc-wdm device
-	[ -f "${MODEMMANAGER_CDCWDM_CACHE}" ] || return
-
-	cdcwdm=$(awk -v wwan="${wwan}" '!/^#/ && $0 ~ wwan { print $2 }' "${MODEMMANAGER_CDCWDM_CACHE}")
-	[ -n "${cdcwdm}" ] || return
-
-	# Remove from cache
-	sed -i "/${wwan} ${cdcwdm}/d" "${MODEMMANAGER_CDCWDM_CACHE}"
-
-	echo "${cdcwdm}"
-}
-
-################################################################################
-# ModemManager needs some time from the ports being added until a modem object
-# is exposed in DBus. With the logic here we do an explicit wait of N seconds
-# for ModemManager to expose the new modem object, making sure that the wait is
-# unique per device (i.e. per physical device sysfs path).
-
-# Gets the modem wait status as retrieved from the cache
-mm_get_modem_wait_status() {
-	local sysfspath="$1"
-
-	# If no sysfs cache file, we're done
-	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] || return
-
-	# Get status of the sysfs path
-	awk -v sysfspath="${sysfspath}" '!/^#/ && $0 ~ sysfspath { print $2 }' "${MODEMMANAGER_SYSFS_CACHE}"
-}
-
-# Clear the modem wait status from the cache, if any
-mm_clear_modem_wait_status() {
-	local sysfspath="$1"
-
-	local escaped_sysfspath
-
-	[ -f "${MODEMMANAGER_SYSFS_CACHE}" ] && {
-		# escape '/', '\' and '&' for sed...
-		escaped_sysfspath=$(echo "$sysfspath" | sed -e 's/[\/&]/\\&/g')
-		sed -i "/${escaped_sysfspath}/d" "${MODEMMANAGER_SYSFS_CACHE}"
-	}
-}
-
-# Sets the modem wait status in the cache
-mm_set_modem_wait_status() {
-	local sysfspath="$1"
-	local status="$2"
-
-	# Remove sysfs line before adding the new one with the new state
-	mm_clear_modem_wait_status "${sysfspath}"
-
-	# Add the new status
-	echo "${sysfspath} ${status}" >> "${MODEMMANAGER_SYSFS_CACHE}"
-}
-
-# Callback for config_foreach()
-mm_get_modem_config_foreach_cb() {
-	local cfg="$1"
-	local sysfspath="$2"
-
-	local proto
-	config_get proto "${cfg}" proto
-	[ "${proto}" = modemmanager ] || return 0
-
-	local dev
-	dev=$(uci_get network "${cfg}" device)
-	[ "${dev}" = "${sysfspath}" ] || return 0
-
-	echo "${cfg}"
-}
-
-# Returns the name of the interface configured for this device
-mm_get_modem_config() {
-	local sysfspath="$1"
-
-	# Look for configuration for the given sysfs path
-	config_load network
-	config_foreach mm_get_modem_config_foreach_cb interface "${sysfspath}"
-}
-
-# Wait for a modem in the specified sysfspath
-mm_wait_for_modem() {
-	local cfg="$1"
-	local sysfspath="$2"
-
-	# TODO: config max wait
-	local n=45
-	local step=5
-
-	while [ $n -ge 0 ]; do
-		[ -d "${sysfspath}" ] || {
-			mm_log "error: ignoring modem detection request: no device at ${sysfspath}"
-			proto_set_available "${cfg}" 0
-			return 1
-		}
-
-		# Check if the modem exists at the given sysfs path
-		if ! mmcli -m "${sysfspath}" > /dev/null 2>&1
-		then
-			mm_log "error: modem not detected at sysfs path"
-		else
-			mm_log "modem exported successfully at ${sysfspath}"
-			mm_log "setting interface '${cfg}' as available"
-			proto_set_available "${cfg}" 1
-			return 0
-		fi
-
-		sleep $step
-		n=$((n-step))
-	done
-
-	mm_log "error: timed out waiting for the modem to get exported at ${sysfspath}"
-	proto_set_available "${cfg}" 0
-	return 2
-}
-
-mm_report_modem_wait() {
-	local sysfspath=$1
-
-	local parent_sysfspath status
-
-	parent_sysfspath=$(mm_find_physdev_sysfs_path "$sysfspath")
-	[ -n "${parent_sysfspath}" ] || {
-		mm_log "error: parent device sysfspath not found"
-		return
-	}
-
-	status=$(mm_get_modem_wait_status "${parent_sysfspath}")
-	case "${status}" in
-		"")
-			local cfg
-
-			cfg=$(mm_get_modem_config "${parent_sysfspath}")
-			if [ -n "${cfg}" ]; then
-				mm_log "interface '${cfg}' is set to configure device '${parent_sysfspath}'"
-				mm_log "now waiting for modem at sysfs path ${parent_sysfspath}"
-				mm_set_modem_wait_status "${parent_sysfspath}" "processed"
-				# Launch subshell for the explicit wait
-				( mm_wait_for_modem "${cfg}" "${parent_sysfspath}" ) > /dev/null 2>&1 &
-			else
-				mm_log "no need to wait for modem at sysfs path ${parent_sysfspath}"
-				mm_set_modem_wait_status "${parent_sysfspath}" "ignored"
-			fi
-			;;
-		"processed")
-			mm_log "already waiting for modem at sysfs path ${parent_sysfspath}"
-			;;
-		"ignored")
-			;;
-		*)
-			mm_log "error: unknown status read for device at sysfs path ${parent_sysfspath}"
-			;;
-	esac
-}
-
-################################################################################
-# Cleanup interfaces
-
-mm_cleanup_interface_cb() {
-	local cfg="$1"
-
-	local proto
-	config_get proto "${cfg}" proto
-	[ "${proto}" = modemmanager ] || return 0
-
-	proto_set_available "${cfg}" 0
-}
-
-mm_cleanup_interfaces() {
-	config_load network
-	config_foreach mm_cleanup_interface_cb interface
-}
-
-mm_cleanup_interface_by_sysfspath() {
-	local dev="$1"
-
-	local cfg
-	cfg=$(mm_get_modem_config "$dev")
-	[ -n "${cfg}" ] || return
-
-	mm_log "setting interface '$cfg' as unavailable"
-	proto_set_available "${cfg}" 0
-}
-
-################################################################################
-# Event reporting
-
-# Receives as input the action, the device name and the subsystem
-mm_report_event() {
-	local action="$1"
-	local name="$2"
-	local subsystem="$3"
-	local sysfspath="$4"
-
-	# Track/untrack events in cache
-	case "${action}" in
-		"add")
-			# On add events, store event details in cache (if not exists yet)
-			grep -qs "${name},${subsystem}" "${MODEMMANAGER_EVENTS_CACHE}" || \
-				echo "${action},${name},${subsystem},${sysfspath}" >> "${MODEMMANAGER_EVENTS_CACHE}"
-			;;
-		"remove")
-			# On remove events, remove old events from cache (match by subsystem+name)
-			sed -i "/${name},${subsystem}/d" "${MODEMMANAGER_EVENTS_CACHE}"
-			;;
-	esac
-
-	# Report the event
-	mm_log "event reported: action=${action}, name=${name}, subsystem=${subsystem}"
-	mmcli --report-kernel-event="action=${action},name=${name},subsystem=${subsystem}" 1>/dev/null 2>&1 &
-
-	# Wait for added modem if a sysfspath is given
-	[ -n "${sysfspath}" ] && [ "$action" = "add" ] && mm_report_modem_wait "${sysfspath}"
-}
-
-mm_report_event_from_cache_line() {
-	local event_line="$1"
-
-	local action name subsystem sysfspath
-	action=$(echo "${event_line}" | awk -F ',' '{ print $1 }')
-	name=$(echo "${event_line}" | awk -F ',' '{ print $2 }')
-	subsystem=$(echo "${event_line}" | awk -F ',' '{ print $3 }')
-	sysfspath=$(echo "${event_line}" | awk -F ',' '{ print $4 }')
-
-	mm_log "cached event found: action=${action}, name=${name}, subsystem=${subsystem}, sysfspath=${sysfspath}"
-	mm_report_event "${action}" "${name}" "${subsystem}" "${sysfspath}"
-}
-
-mm_report_events_from_cache() {
-	# Remove the sysfs cache
-	rm -f "${MODEMMANAGER_SYSFS_CACHE}"
-
-	local n=60
-	local step=1
-	local mmrunning=0
-
-	# Wait for ModemManager to be available in the bus
-	while [ $n -ge 0 ]; do
-		sleep $step
-		mm_log "checking if ModemManager is available..."
-
-		if ! mmcli -L >/dev/null 2>&1
-		then
-			mm_log "ModemManager not yet available"
-		else
-			mmrunning=1
-			break
-		fi
-		n=$((n-step))
-	done
-
-	[ ${mmrunning} -eq 1 ] || {
-		mm_log "error: couldn't report initial kernel events: ModemManager not running"
-		return
-	}
-
-	# Report cached kernel events
-	while IFS= read -r event_line; do
-		mm_report_event_from_cache_line "${event_line}"
-	done < ${MODEMMANAGER_EVENTS_CACHE}
-}

modemmanager/files/modemmanager.init

@@ -1,34 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2016 Aleksander Morgado <aleksander@aleksander.es>
-
-USE_PROCD=1
-START=70
-
-stop_service() {
-	# Load common utils
-	. /usr/share/ModemManager/modemmanager.common
-	# Set all configured interfaces as unavailable
-	mm_cleanup_interfaces
-}
-
-start_service() {
-	# Setup ModemManager service
-	#
-	# We will make sure that the rundir always exists, and we initially cleanup
-	# all interfaces flagging them as unavailable.
-	#
-	# The cached events processing will wait for MM to be available in DBus
-	# and will make sure all ports are re-notified to ModemManager every time
-	# it starts.
-	#
-	# All these commands need to be executed on every MM start, even after
-	# procd-triggered respawns, which is why this is wrapped in a startup
-	# wrapper script called '/usr/sbin/ModemManager-wrapper'.
-	#
-	. /usr/share/ModemManager/modemmanager.common
-	procd_open_instance
-	procd_set_param command /usr/sbin/ModemManager-wrapper
-	procd_set_param respawn "${respawn_threshold:-3600}" "${respawn_timeout:-5}" "${respawn_retry:-5}"
-	procd_set_param pidfile "${MODEMMANAGER_PID_FILE}"
-	procd_close_instance
-}

modemmanager/files/modemmanager.proto

@@ -1,555 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2016-2019 Aleksander Morgado <aleksander@aleksander.es>
-
-[ -x /usr/bin/mmcli ] || exit 0
-[ -x /usr/sbin/pppd ] || exit 0
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. ../netifd-proto.sh
-	. ./ppp.sh
-	init_proto "$@"
-}
-
-cdr2mask ()
-{
-	# Number of args to shift, 255..255, first non-255 byte, zeroes
-	set -- $(( 5 - ($1 / 8) )) 255 255 255 255 $(( (255 << (8 - ($1 % 8))) & 255 )) 0 0 0
-	if [ "$1" -gt 1 ]
-	then
-		shift "$1"
-	else
-		shift
-	fi
-	echo "${1-0}"."${2-0}"."${3-0}"."${4-0}"
-}
-
-# This method expects as first argument a list of key-value pairs, as returned by mmcli --output-keyvalue
-# The second argument must be exactly the name of the field to read
-#
-# Sample output:
-#     $ mmcli -m 0 -K
-#     modem.dbus-path                                 : /org/freedesktop/ModemManager1/Modem/0
-#     modem.generic.device-identifier                 : ed6eff2e3e0f90463da1c2a755b2acacd1335752
-#     modem.generic.manufacturer                      : Dell Inc.
-#     modem.generic.model                             : DW5821e Snapdragon X20 LTE
-#     modem.generic.revision                          : T77W968.F1.0.0.4.0.GC.009\n026
-#     modem.generic.carrier-configuration             : GCF
-#     modem.generic.carrier-configuration-revision    : 08E00009
-#     modem.generic.hardware-revision                 : DW5821e Snapdragon X20 LTE
-#     ....
-modemmanager_get_field() {
-	local list=$1
-	local field=$2
-	local value=""
-
-	[ -z "${list}" ] || [ -z "${field}" ] && return
-
-	# there is always at least a whitespace after each key, and we use that as part of the
-	# key matching we do (e.g. to avoid getting 'modem.generic.state-failed-reason' as a result
-	# when grepping for 'modem.generic.state'.
-	line=$(echo "${list}" | grep "${field} ")
-	value=$(echo ${line#*:})
-
-	# not found?
-	[ -n "${value}" ] || return 2
-
-	# only print value if set
-	[ "${value}" != "--" ] && echo "${value}"
-	return 0
-}
-
-# build a comma-separated list of values from the list
-modemmanager_get_multivalue_field() {
-	local list=$1
-	local field=$2
-	local value=""
-	local length idx item
-
-	[ -z "${list}" ] || [ -z "${field}" ] && return
-
-	length=$(modemmanager_get_field "${list}" "${field}.length")
-	[ -n "${length}" ] || return 0
-	[ "$length" -ge 1 ] || return 0
-
-	idx=1
-	while [ $idx -le "$length" ]; do
-		item=$(modemmanager_get_field "${list}" "${field}.value\[$idx\]")
-		[ -n "${item}" ] && [ "${item}" != "--" ] && {
-			[ -n "${value}" ] && value="${value}, "
-			value="${value}${item}"
-		}
-		idx=$((idx + 1))
-	done
-
-	# nothing built?
-	[ -n "${value}" ] || return 2
-
-	# only print value if set
-	echo "${value}"
-	return 0
-}
-
-modemmanager_cleanup_connection() {
-	local modemstatus="$1"
-
-	local bearercount idx bearerpath
-
-	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
-
-	# do nothing if no bearers reported
-	[ -n "${bearercount}" ] && [ "$bearercount" -ge 1 ] && {
-		# explicitly disconnect just in case
-		mmcli --modem="${device}" --simple-disconnect >/dev/null 2>&1
-		# and remove all bearer objects, if any found
-		idx=1
-		while [ $idx -le "$bearercount" ]; do
-			bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[$idx\]")
-			mmcli --modem "${device}" --delete-bearer="${bearerpath}" >/dev/null 2>&1
-			idx=$((idx + 1))
-		done
-	}
-}
-
-modemmanager_connected_method_ppp_ipv4() {
-	local interface="$1"
-	local ttyname="$2"
-	local username="$3"
-	local password="$4"
-	local allowedauth="$5"
-
-	# all auth types are allowed unless a user given list is given
-	local authopts
-	local pap=1
-	local chap=1
-	local mschap=1
-	local mschapv2=1
-	local eap=1
-
-	[ -n "$allowedauth" ] && {
-		pap=0 chap=0 mschap=0 mschapv2=0 eap=0
-		for auth in $allowedauth; do
-			case $auth in
-				"pap") pap=1 ;;
-				"chap") chap=1 ;;
-				"mschap") mschap=1 ;;
-				"mschapv2") mschapv2=1 ;;
-				"eap") eap=1 ;;
-				*) ;;
-			esac
-		done
-	}
-
-	[ $pap -eq 1 ] || append authopts "refuse-pap"
-	[ $chap -eq 1 ] || append authopts "refuse-chap"
-	[ $mschap -eq 1 ] || append authopts "refuse-mschap"
-	[ $mschapv2 -eq 1 ] || append authopts "refuse-mschap-v2"
-	[ $eap -eq 1 ] || append authopts "refuse-eap"
-
-	proto_run_command "${interface}" /usr/sbin/pppd \
-		"${ttyname}" \
-		115200 \
-		nodetach \
-		noaccomp \
-		nobsdcomp \
-		nopcomp \
-		novj \
-		noauth \
-		$authopts \
-		${username:+ user $username} \
-		${password:+ password $password} \
-		lcp-echo-failure 5 \
-		lcp-echo-interval 15 \
-		lock \
-		crtscts \
-		nodefaultroute \
-		usepeerdns \
-		ipparam "${interface}" \
-		ip-up-script /lib/netifd/ppp-up \
-		ip-down-script /lib/netifd/ppp-down
-}
-
-modemmanager_disconnected_method_ppp_ipv4() {
-	local interface="$1"
-
-	echo "running disconnection (ppp method)"
-
-	[ -n "${ERROR}" ] && {
-		local errorstring
-		errorstring=$(ppp_exitcode_tostring "${ERROR}")
-		case "$ERROR" in
-			0)
-				;;
-			2)
-				proto_notify_error "$interface" "$errorstring"
-				proto_block_restart "$interface"
-				;;
-			*)
-				proto_notify_error "$interface" "$errorstring"
-				;;
-		esac
-	} || echo "pppd result code not given"
-
-	proto_kill_command "$interface"
-}
-
-modemmanager_connected_method_dhcp_ipv4() {
-	local interface="$1"
-	local wwan="$2"
-	local metric="$3"
-	local defaultroute="$4"
-
-	proto_init_update "${wwan}" 1
-	proto_set_keep 1
-	proto_send_update "${interface}"
-
-	json_init
-	json_add_string name "${interface}_4"
-	json_add_string ifname "@${interface}"
-	json_add_string proto "dhcp"
-	proto_add_dynamic_defaults
-	[ -n "$metric" ] && json_add_int metric "${metric}"
-	json_close_object
-	ubus call network add_dynamic "$(json_dump)"
-}
-
-modemmanager_connected_method_static_ipv4() {
-	local interface="$1"
-	local wwan="$2"
-	local address="$3"
-	local prefix="$4"
-	local gateway="$5"
-	local mtu="$6"
-	local dns1="$7"
-	local dns2="$8"
-	local metric="$9"
-	local defaultroute="$10"
-
-	local mask=""
-
-	[ -n "${address}" ] || {
-		proto_notify_error "${interface}" ADDRESS_MISSING
-		return
-	}
-
-	[ -n "${prefix}" ] || {
-		proto_notify_error "${interface}" PREFIX_MISSING
-		return
-	}
-	mask=$(cdr2mask "${prefix}")
-
-	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
-
-	proto_init_update "${wwan}" 1
-	proto_set_keep 1
-	echo "adding IPv4 address ${address}, netmask ${mask}"
-	proto_add_ipv4_address "${address}" "${mask}"
-	[ -n "${gateway}" ] && [ "${defaultroute}" != 0 ] && {
-		echo "adding default IPv4 route via ${gateway}"
-		logger -t "modemmanager.proto" "adding default IPv4 route via ${gateway} ${address}"
-		proto_add_ipv4_route "0.0.0.0" "0" "${gateway}" "${address}"
-	}
-	[ -n "${dns1}" ] && {
-		echo "adding primary DNS at ${dns1}"
-		proto_add_dns_server "${dns1}"
-	}
-	[ -n "${dns2}" ] && {
-		echo "adding secondary DNS at ${dns2}"
-		proto_add_dns_server "${dns2}"
-	}
-	[ -n "$metric" ] && json_add_int metric "${metric}"
-	proto_send_update "${interface}"
-}
-
-modemmanager_connected_method_dhcp_ipv6() {
-	local interface="$1"
-	local wwan="$2"
-	local metric="$3"
-	local defaultroute="$4"
-
-	proto_init_update "${wwan}" 1
-	proto_set_keep 1
-	proto_send_update "${interface}"
-
-	json_init
-	json_add_string name "${interface}_6"
-	json_add_string ifname "@${interface}"
-	json_add_string proto "dhcpv6"
-	proto_add_dynamic_defaults
-	json_add_string extendprefix 1 # RFC 7278: Extend an IPv6 /64 Prefix to LAN
-	[ -n "$metric" ] && json_add_int metric "${metric}"
-	json_close_object
-	ubus call network add_dynamic "$(json_dump)"
-}
-
-modemmanager_connected_method_static_ipv6() {
-	local interface="$1"
-	local wwan="$2"
-	local address="$3"
-	local prefix="$4"
-	local gateway="$5"
-	local mtu="$6"
-	local dns1="$7"
-	local dns2="$8"
-	local metric="$9"
-	local defaultroute="$10"
-
-	[ -n "${address}" ] || {
-		proto_notify_error "${interface}" ADDRESS_MISSING
-		return
-	}
-
-	[ -n "${prefix}" ] || {
-		proto_notify_error "${interface}" PREFIX_MISSING
-		return
-	}
-
-	[ -n "${mtu}" ] && /sbin/ip link set dev "${wwan}" mtu "${mtu}"
-
-	proto_init_update "${wwan}" 1
-	proto_set_keep 1
-	echo "adding IPv6 address ${address}, prefix ${prefix}"
-	proto_add_ipv6_address "${address}" "128"
-	proto_add_ipv6_prefix "${address}/${prefix}"
-	[ -n "${gateway}" ] && [ "$defaultroute" != 0 ] && {
-		echo "adding default IPv6 route via ${gateway}"
-		proto_add_ipv6_route "${gateway}" "128"
-		proto_add_ipv6_route "::0" "0" "${gateway}" "" "" "${address}/${prefix}"
-	}
-	[ -n "${dns1}" ] && {
-		echo "adding primary DNS at ${dns1}"
-		proto_add_dns_server "${dns1}"
-	}
-	[ -n "${dns2}" ] && {
-		echo "adding secondary DNS at ${dns2}"
-		proto_add_dns_server "${dns2}"
-	}
-	[ -n "$metric" ] && json_add_int metric "${metric}"
-	proto_send_update "${interface}"
-}
-
-modemmanager_disconnected_method_common() {
-	local interface="$1"
-
-	echo "running disconnection (common)"
-	proto_notify_error "${interface}" MM_DISCONNECT_IN_PROGRESS
-
-	proto_init_update "*" 0
-	proto_send_update "${interface}"
-}
-
-proto_modemmanager_init_config() {
-	available=1
-	no_device=1
-	proto_config_add_string	 device
-	proto_config_add_string	 apn
-	proto_config_add_string	 'allowedauth:list(string)'
-	proto_config_add_string	 username
-	proto_config_add_string	 password
-	proto_config_add_string	 pincode
-	proto_config_add_string	 iptype
-	proto_config_add_int	 signalrate
-	proto_config_add_boolean lowpower
-	proto_config_add_defaults
-}
-
-proto_modemmanager_setup() {
-	local interface="$1"
-
-	local modempath modemstatus bearercount bearerpath connectargs bearerstatus beareriface
-	local bearermethod_ipv4 bearermethod_ipv6 auth cliauth
-	local operatorname operatorid registration accesstech signalquality
-
-	local device apn allowedauth username password pincode iptype metric signalrate
-
-	local address prefix gateway mtu dns1 dns2 defaultroute
-
-	json_get_vars device apn allowedauth username password pincode iptype metric signalrate defaultroute
-
-	# validate sysfs path given in config
-	[ -n "${device}" ] || {
-		echo "No device specified"
-		proto_notify_error "${interface}" NO_DEVICE
-		proto_set_available "${interface}" 0
-		return 1
-	}
-	[ -e "${device}" ] || {
-		echo "Device not found in sysfs"
-		proto_set_available "${interface}" 0
-		return 1
-	}
-
-	# validate that ModemManager is handling the modem at the sysfs path
-	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
-	modempath=$(modemmanager_get_field "${modemstatus}" "modem.dbus-path")
-	[ -n "${modempath}" ] || {
-		echo "Device not managed by ModemManager"
-		proto_notify_error "${interface}" DEVICE_NOT_MANAGED
-		proto_set_available "${interface}" 0
-		return 1
-	}
-	echo "modem available at ${modempath}"
-
-	# always cleanup before attempting a new connection, just in case
-	modemmanager_cleanup_connection "${modemstatus}"
-
-	# if allowedauth list given, build option string
-	for auth in $allowedauth; do
-		cliauth="${cliauth}${cliauth:+|}$auth"
-	done
-
-	# setup connect args; APN mandatory (even if it may be empty)
-	echo "starting connection with apn '${apn}'..."
-	proto_notify_error "${interface}" MM_CONNECT_IN_PROGRESS
-
-	connectargs="apn=${apn}${iptype:+,ip-type=${iptype}}${cliauth:+,allowed-auth=${cliauth}}${username:+,user=${username}}${password:+,password=${password}}${pincode:+,pin=${pincode}}"
-	mmcli --modem="${device}" --timeout 120 --simple-connect="${connectargs}" || {
-		proto_notify_error "${interface}" MM_CONNECT_FAILED
-		proto_block_restart "${interface}"
-		return 1
-	}
-
-	# check if Signal refresh rate is set
-	if [ -n "${signalrate}" ] && [ "${signalrate}" -eq "${signalrate}" ] 2>/dev/null; then
-		echo "setting signal refresh rate to ${signalrate} seconds"
-		mmcli --modem="${device}" --signal-setup="${signalrate}"
-	else
-		echo "signal refresh rate is not set"
-	fi
-
-	# log additional useful information
-	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
-	operatorname=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-name")
-	[ -n "${operatorname}" ] && echo "network operator name: ${operatorname}"
-	operatorid=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.operator-code")
-	[ -n "${operatorid}" ] && echo "network operator MCCMNC: ${operatorid}"
-	registration=$(modemmanager_get_field "${modemstatus}" "modem.3gpp.registration-state")
-	[ -n "${registration}" ] && echo "registration type: ${registration}"
-	accesstech=$(modemmanager_get_multivalue_field "${modemstatus}" "modem.generic.access-technologies")
-	[ -n "${accesstech}" ] && echo "access technology: ${accesstech}"
-	signalquality=$(modemmanager_get_field "${modemstatus}" "modem.generic.signal-quality.value")
-	[ -n "${signalquality}" ] && echo "signal quality: ${signalquality}%"
-
-	# we won't like it if there are more than one bearers, as that would mean the
-	# user manually created them, and that's unsupported by this proto
-	bearercount=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.length")
-	[ -n "${bearercount}" ] && [ "$bearercount" -eq 1 ] || {
-		proto_notify_error "${interface}" INVALID_BEARER_LIST
-		return 1
-	}
-
-	# load connected bearer information
-	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
-	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
-
-	# load network interface and method information
-	beareriface=$(modemmanager_get_field "${bearerstatus}" "bearer.status.interface")
-	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
-	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
-
-	# setup IPv4
-	[ -n "${bearermethod_ipv4}" ] && {
-		echo "IPv4 connection setup required in interface ${interface}: ${bearermethod_ipv4}"
-		case "${bearermethod_ipv4}" in
-		"dhcp")
-			modemmanager_connected_method_dhcp_ipv4 "${interface}" "${beareriface}" "${metric}" "${defaultroute}"
-			;;
-		"static")
-			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.address")
-			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.prefix")
-			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.gateway")
-			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.mtu")
-			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[1\]")
-			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.dns.value\[2\]")
-			modemmanager_connected_method_static_ipv4 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}" "${defaultroute}"
-			;;
-		"ppp")
-			modemmanager_connected_method_ppp_ipv4 "${interface}" "${beareriface}" "${username}" "${password}" "${allowedauth}"
-			;;
-		*)
-			proto_notify_error "${interface}" UNKNOWN_METHOD
-			return 1
-			;;
-		esac
-	}
-
-	# setup IPv6
-	# note: if using ipv4v6, both IPv4 and IPv6 settings will have the same MTU and metric values reported
-	[ -n "${bearermethod_ipv6}" ] && {
-		echo "IPv6 connection setup required in interface ${interface}: ${bearermethod_ipv6}"
-		case "${bearermethod_ipv6}" in
-		"dhcp")
-			modemmanager_connected_method_dhcp_ipv6 "${interface}" "${beareriface}" "${metric}" "${defaultroute}"
-			;;
-		"static")
-			address=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.address")
-			prefix=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.prefix")
-			gateway=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.gateway")
-			mtu=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.mtu")
-			dns1=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[1\]")
-			dns2=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.dns.value\[2\]")
-			modemmanager_connected_method_static_ipv6 "${interface}" "${beareriface}" "${address}" "${prefix}" "${gateway}" "${mtu}" "${dns1}" "${dns2}" "${metric}" "${defaultroute}"
-			;;
-		"ppp")
-			proto_notify_error "${interface}" "unsupported method"
-			return 1
-			;;
-		*)
-			proto_notify_error "${interface}" UNKNOWN_METHOD
-			return 1
-			;;
-		esac
-	}
-
-	return 0
-}
-
-proto_modemmanager_teardown() {
-	local interface="$1"
-
-	local modemstatus bearerpath errorstring
-	local bearermethod_ipv4 bearermethod_ipv6
-
-	local device lowpower iptype
-	json_get_vars device lowpower iptype
-
-	echo "stopping network"
-	proto_notify_error "${interface}" MM_TEARDOWN_IN_PROGRESS
-
-	# load connected bearer information, just the first one should be ok
-	modemstatus=$(mmcli --modem="${device}" --output-keyvalue)
-	bearerpath=$(modemmanager_get_field "${modemstatus}" "modem.generic.bearers.value\[1\]")
-	[ -n "${bearerpath}" ] || {
-		echo "couldn't load bearer path"
-		return
-	}
-
-	# load bearer connection methods
-	bearerstatus=$(mmcli --bearer "${bearerpath}" --output-keyvalue)
-	bearermethod_ipv4=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv4-config.method")
-	[ -n "${bearermethod_ipv4}" ] &&
-		echo "IPv4 connection teardown required in interface ${interface}: ${bearermethod_ipv4}"
-	bearermethod_ipv6=$(modemmanager_get_field "${bearerstatus}" "bearer.ipv6-config.method")
-	[ -n "${bearermethod_ipv6}" ] &&
-		echo "IPv6 connection teardown required in interface ${interface}: ${bearermethod_ipv6}"
-
-	# disconnection handling only requires special treatment in IPv4/PPP
-	[ "${bearermethod_ipv4}" = "ppp" ] && modemmanager_disconnected_method_ppp_ipv4 "${interface}"
-	modemmanager_disconnected_method_common "${interface}"
-
-	# disconnect
-	mmcli --modem="${device}" --simple-disconnect ||
-		proto_notify_error "${interface}" DISCONNECT_FAILED
-
-	# disable
-	mmcli --modem="${device}" --disable
-	proto_notify_error "${interface}" MM_MODEM_DISABLED
-
-	# low power, only if requested
-	[ "${lowpower:-0}" -lt 1 ] ||
-		mmcli --modem="${device}" --set-power-state-low
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
-	add_protocol modemmanager
-}

modemmanager/files/usr/sbin/ModemManager-wrapper

@@ -1,33 +0,0 @@
-#!/bin/sh
-
-trap_with_arg() {
-	func="$1" ; shift
-	for sig ; do
-		# shellcheck disable=SC2064
-		trap "$func $sig" "$sig"
-	done
-}
-
-func_trap() {
-	logger "ModemManager-wrapper[$$]" "Sending signal ${1}..."
-	kill "-${1}" "$CHILD" 2>/dev/null
-}
-
-main() {
-	. /usr/share/ModemManager/modemmanager.common
-
-	trap_with_arg func_trap INT TERM KILL
-
-	mkdir -p "${MODEMMANAGER_RUNDIR}"
-	chmod 0755 "${MODEMMANAGER_RUNDIR}"
-	mm_cleanup_interfaces
-
-	/usr/sbin/ModemManager "$@" 1>/dev/null 2>/dev/null &
-	CHILD="$!"
-
-	mm_report_events_from_cache
-
-	wait "$CHILD"
-}
-
-main "$@"

openmptcprouter-full/Makefile

@@ -46,7 +46,6 @@ MY_DEPENDS := \
     luci-app-openvpn \
     shadowsocks-libev-ss-server shadowsocks-libev-ss-tunnel \
     omr-6in4 ip6tables-mod-nat luci-proto-ipv6 6to4 6in4 6rd ip6tables \
-    speedtestcpp \
     iftop \
     htop \
     nano \

speedtestcpp/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2021 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=speedtestcpp
-PKG_VERSION:=1.12
-PKG_RELEASE:=2
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_VERSION:=a01ae6eb04c5d3f4847aef73bf77849275ccc6eb
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/fmantz/SpeedTest.git
-
-PKG_MAINTAINER:=Ycarus <ycarus@zugaina.org>
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-
-CMAKE_INSTALL:=1
-
-include $(INCLUDE_DIR)/package.mk
-include $(INCLUDE_DIR)/cmake.mk
-
-define Package/speedtestcpp
-	SECTION:=net
-	CATEGORY:=Network
-	TITLE:=Yet another unofficial speedtest.net client cli interface
-	URL:=https://github.com/fmantz/SpeedTest
-	DEPENDS:=+curl +libstdcpp +libopenssl +libxml2
-endef
-
-define Package/speedtestcpp/install
-	$(INSTALL_DIR) $(1)/usr/bin
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/SpeedTest $(1)/usr/bin/
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/speedtestJson $(1)/usr/bin/
-endef
-
-$(eval $(call BuildPackage,speedtestcpp))

v2ray-core/Config.in

@@ -1,149 +0,0 @@
-menu "V2Ray Configuration"
-	depends on PACKAGE_v2ray-core
-
-choice
-	prompt "JSON Config Support"
-	default V2RAY_JSON_V2CTL
-
-	config V2RAY_JSON_V2CTL
-		bool "Load JSON from V2Ctl"
-
-	config V2RAY_JSON_INTERNAL
-		bool "Load JSON Internally"
-
-	config V2RAY_JSON_NONE
-		bool "None"
-
-endchoice
-
-config V2RAY_EXCLUDE_V2CTL
-	bool "Exclude V2Ctl"
-	depends on V2RAY_JSON_INTERNAL || V2RAY_JSON_NONE
-	default n
-
-config V2RAY_EXCLUDE_ASSETS
-	bool "Exclude geoip.dat & geosite.dat"
-	default n
-
-config V2RAY_COMPRESS_UPX
-	bool "Compress executable files with UPX"
-	default n
-
-choice
-	prompt "Disable Features"
-	default V2RAY_DISABLE_NONE
-
-	config V2RAY_DISABLE_NONE
-		bool "None"
-
-	config V2RAY_DISABLE_CUSTOM
-		bool "Custom"
-
-endchoice
-
-config V2RAY_DISABLE_DNS
-	bool "Disable Internal DNS Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_LOG
-	bool "Disable Log Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_POLICY
-	bool "Disable Local Policy Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_REVERSE
-	bool "Disable Reverse Proxy Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_ROUTING
-	bool "Disable Internal Routing Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_STATISTICS
-	bool "Disable Statistics Support"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_BLACKHOLE_PROTO
-	bool "Disable Blackhole Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_DNS_PROXY
-	bool "Disable DNS Proxy"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_DOKODEMO_PROTO
-	bool "Disable Dokodemo-door Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_FREEDOM_PROTO
-	bool "Disable Freedom Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_MTPROTO_PROXY
-	bool "Disable MTProto Proxy"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_HTTP_PROTO
-	bool "Disable HTTP Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_SHADOWSOCKS_PROTO
-	bool "Disable Shadowsocks Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_SOCKS_PROTO
-	bool "Disable Socks Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_VMESS_PROTO
-	bool "Disable VMess Protocol"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_TCP_TRANS
-	bool "Disable TCP Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_MKCP_TRANS
-	bool "Disable mKCP Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_WEBSOCKET_TRANS
-	bool "Disable WebSocket Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_HTTP2_TRANS
-	bool "Disable HTTP/2 Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_DOMAIN_SOCKET_TRANS
-	bool "Disable Domain Socket Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-config V2RAY_DISABLE_QUIC_TRANS
-	bool "Disable QUIC Transport"
-	depends on V2RAY_DISABLE_CUSTOM
-	default n
-
-endmenu

v2ray-core/LICENSE

@@ -1,21 +0,0 @@
-MIT License
-
-Copyright (c) 2019 Xingwang Liao
-
-Permission is hereby granted, free of charge, to any person obtaining a copy
-of this software and associated documentation files (the "Software"), to deal
-in the Software without restriction, including without limitation the rights
-to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
-copies of the Software, and to permit persons to whom the Software is
-furnished to do so, subject to the following conditions:
-
-The above copyright notice and this permission notice shall be included in all
-copies or substantial portions of the Software.
-
-THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
-AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
-LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
-OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
-SOFTWARE.

v2ray-core/Makefile

@@ -1,308 +0,0 @@
-#
-# Copyright (C) 2019 Xingwang Liao
-# Copyright (C) 2020 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=v2ray-core
-PKG_VERSION:=4.43.0
-PKG_RELEASE:=1
-
-#PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
-PKG_SOURCE:=v$(PKG_VERSION).tar.gz
-PKG_SOURCE_URL:=https://github.com/v2fly/v2ray-core/archive/refs/tags/
-PKG_HASH:=f27b8fe8e1e102b0297339ee368c8b650fde0f949e0d90e1229ff6744f99ba0f
-
-PKG_LICENSE:=MIT
-PKG_LICENSE_FILES:=LICENSE
-PKG_MAINTAINER:=Yannick Chabanois <ycarus@zugaina.org>
-
-PKG_CONFIG_DEPENDS := \
-	CONFIG_V2RAY_JSON_V2CTL \
-	CONFIG_V2RAY_JSON_INTERNAL \
-	CONFIG_V2RAY_JSON_NONE \
-	CONFIG_V2RAY_EXCLUDE_V2CTL \
-	CONFIG_V2RAY_EXCLUDE_ASSETS \
-	CONFIG_V2RAY_COMPRESS_UPX \
-	CONFIG_V2RAY_DISABLE_NONE \
-	CONFIG_V2RAY_DISABLE_CUSTOM \
-	CONFIG_V2RAY_DISABLE_DNS \
-	CONFIG_V2RAY_DISABLE_LOG \
-	CONFIG_V2RAY_DISABLE_POLICY \
-	CONFIG_V2RAY_DISABLE_REVERSE \
-	CONFIG_V2RAY_DISABLE_ROUTING \
-	CONFIG_V2RAY_DISABLE_STATISTICS \
-	CONFIG_V2RAY_DISABLE_BLACKHOLE_PROTO \
-	CONFIG_V2RAY_DISABLE_DNS_PROXY \
-	CONFIG_V2RAY_DISABLE_DOKODEMO_PROTO \
-	CONFIG_V2RAY_DISABLE_FREEDOM_PROTO \
-	CONFIG_V2RAY_DISABLE_MTPROTO_PROXY \
-	CONFIG_V2RAY_DISABLE_HTTP_PROTO \
-	CONFIG_V2RAY_DISABLE_SHADOWSOCKS_PROTO \
-	CONFIG_V2RAY_DISABLE_SOCKS_PROTO \
-	CONFIG_V2RAY_DISABLE_VMESS_PROTO \
-	CONFIG_V2RAY_DISABLE_TCP_TRANS \
-	CONFIG_V2RAY_DISABLE_MKCP_TRANS \
-	CONFIG_V2RAY_DISABLE_WEBSOCKET_TRANS \
-	CONFIG_V2RAY_DISABLE_HTTP2_TRANS \
-	CONFIG_V2RAY_DISABLE_DOMAIN_SOCKET_TRANS \
-	CONFIG_V2RAY_DISABLE_QUIC_TRANS
-
-PKG_BUILD_DEPENDS:=golang/host
-PKG_BUILD_PARALLEL:=1
-PKG_USE_MIPS16:=0
-
-GO_PKG:=github.com/v2fly/v2ray-core/v4
-GO_PKG_LDFLAGS:=-s -w
-
-include $(INCLUDE_DIR)/package.mk
-include $(TOPDIR)/feeds/packages/lang/golang/golang-package.mk
-
-define Package/v2ray-core
-  TITLE:=A platform for building proxies
-  URL:=https://www.v2fly.org
-  SECTION:=net
-  CATEGORY:=Network
-  SUBMENU:=Project V
-  DEPENDS:=$(GO_ARCH_DEPENDS) +ca-bundle +protobuf
-endef
-
-define Package/v2ray-core/config
-	source "$(SOURCE)/Config.in"
-endef
-
-define Package/v2ray-core/description
-Project V is a set of network tools that help you to build your own computer network.
-It secures your network connections and thus protects your privacy.
-
-  This package contains v2ray, v2ctl and v2ray-assets.
-endef
-
-V2RAY_SED_ARGS:=
-
-ifeq ($(CONFIG_V2RAY_JSON_INTERNAL),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/main\/json"/\/\/ &/; \
-	/\/\/ _ "github.com\/v2fly\/v2ray-core\/v4\/main\/jsonem"/s/\/\/ //;
-else ifeq ($(CONFIG_V2RAY_JSON_NONE),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/main\/json"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_CUSTOM),y)
-
-ifeq ($(CONFIG_V2RAY_DISABLE_DNS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/dns"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_LOG),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/log"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/log\/command"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_POLICY),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/policy"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_REVERSE),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/reverse"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_ROUTING),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/router"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_STATISTICS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/stats"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/app\/stats\/command"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_BLACKHOLE_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/blackhole"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_DNS_PROXY),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/dns"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_DOKODEMO_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/dokodemo"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_FREEDOM_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/freedom"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_MTPROTO_PROXY),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/mtproto"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_HTTP_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/http"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_SHADOWSOCKS_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/shadowsocks"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_SOCKS_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/socks"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_VMESS_PROTO),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/vmess\/inbound"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/proxy\/vmess\/outbound"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_TCP_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/tcp"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_MKCP_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/kcp"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_WEBSOCKET_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/websocket"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_HTTP2_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/http"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/http"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_DOMAIN_SOCKET_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/domainsocket"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_QUIC_TRANS),y)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/quic"/\/\/ &/;
-endif
-
-ifeq ($(CONFIG_V2RAY_DISABLE_MKCP_TRANS)$(CONFIG_V2RAY_DISABLE_QUIC_TRANS),yy)
-V2RAY_SED_ARGS += \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/noop"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/srtp"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/tls"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/utp"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/wechat"/\/\/ &/; \
-	s/_ "github.com\/v2fly\/v2ray-core\/v4\/transport\/internet\/headers\/wireguard"/\/\/ &/;
-endif
-
-endif
-
-GEOIP_VER:=latest
-GEOIP_FILE:=geoip-$(GEOIP_VER).dat
-
-define Download/geoip.dat
-  URL:=https://github.com/v2ray/geoip/releases/$(GEOIP_VER)/download
-  URL_FILE:=geoip.dat
-  FILE:=$(GEOIP_FILE)
-  HASH:=skip
-endef
-
-GEOSITE_VER:=latest
-GEOSITE_FILE:=geosite-$(GEOSITE_VER).dat
-
-define Download/geosite.dat
-  URL:=https://github.com/v2ray/domain-list-community/releases/$(GEOSITE_VER)/download
-  URL_FILE:=dlc.dat
-  FILE:=$(GEOSITE_FILE)
-  HASH:=skip
-endef
-
-define Build/Prepare
-	$(Build/Prepare/Default)
-
-ifneq ($(CONFIG_V2RAY_EXCLUDE_ASSETS),y)
-	# move file to make sure download new file every build
-	mv -f $(DL_DIR)/$(GEOIP_FILE) $(PKG_BUILD_DIR)/release/config/geoip.dat
-	mv -f $(DL_DIR)/$(GEOSITE_FILE) $(PKG_BUILD_DIR)/release/config/geosite.dat
-endif
-
-	( \
-		sed -i \
-			's/\(version[[:space:]]*=[[:space:]]*"\).*\("\)/\1$(PKG_VERSION)\2/; \
-			s/\(build[[:space:]]*=[[:space:]]*"\).*\("\)/\1OpenWrt R$(PKG_RELEASE)\2/' \
-			$(PKG_BUILD_DIR)/core.go ; \
-	)
-ifneq ($(V2RAY_SED_ARGS),)
-	( \
-		sed -i \
-			'$(V2RAY_SED_ARGS)' \
-			$(PKG_BUILD_DIR)/main/distro/all/all.go ; \
-	)
-endif
-endef
-
-define Build/Compile
-	$(eval GO_PKG_BUILD_PKG:=$(GO_PKG)/main)
-	$(call GoPackage/Build/Compile)
-	mv -f $(GO_PKG_BUILD_BIN_DIR)/main $(GO_PKG_BUILD_BIN_DIR)/v2ray
-
-ifeq ($(CONFIG_V2RAY_COMPRESS_UPX),y)
-	upx --ultra-brute $(GO_PKG_BUILD_BIN_DIR)/v2ray
-endif
-
-ifneq ($(CONFIG_V2RAY_EXCLUDE_V2CTL),y)
-	$(eval GO_PKG_BUILD_PKG:=$(GO_PKG)/infra/control/main)
-	$(call GoPackage/Build/Compile)
-	mv -f $(GO_PKG_BUILD_BIN_DIR)/main $(GO_PKG_BUILD_BIN_DIR)/v2ctl
-
-ifeq ($(CONFIG_V2RAY_COMPRESS_UPX),y)
-	upx --ultra-brute $(GO_PKG_BUILD_BIN_DIR)/v2ctl
-endif
-endif
-endef
-
-define Package/v2ray-core/install
-	$(call GoPackage/Package/Install/Bin,$(PKG_INSTALL_DIR))
-
-	$(INSTALL_DIR) $(1)/usr/bin
-
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/v2ray $(1)/usr/bin
-	$(CP) ./files/* $(1)/
-
-ifneq ($(CONFIG_V2RAY_EXCLUDE_V2CTL),y)
-	$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/v2ctl $(1)/usr/bin
-endif
-
-ifneq ($(CONFIG_V2RAY_EXCLUDE_ASSETS),y)
-	$(INSTALL_DATA) \
-		$(PKG_BUILD_DIR)/release/config/{geoip,geosite}.dat \
-		$(1)/usr/bin
-endif
-endef
-
-ifneq ($(CONFIG_V2RAY_EXCLUDE_ASSETS),y)
-$(eval $(call Download,geoip.dat))
-$(eval $(call Download,geosite.dat))
-endif
-
-$(eval $(call GoBinPackage,v2ray-core))
-$(eval $(call BuildPackage,v2ray-core))

v2ray-core/files/etc/firewall.v2ray-rules

@@ -1,2 +0,0 @@
-#!/bin/sh
-/etc/init.d/v2ray rules_up

v2ray-core/files/etc/uci-defaults/3010-omr-v2ray

@@ -1,158 +0,0 @@
-#!/bin/sh
-
-if [ -z "$(uci -q get v2ray.main)" ]; then
-	touch /etc/config/v2ray
-	uci batch <<-EOF
-		set v2ray.main=v2ray
-		set v2ray.main.v2ray_file='/usr/bin/v2ray'
-		set v2ray.main.mem_percentage='0'
-		set v2ray.main.loglevel='debug'
-		set v2ray.main.access_log='/dev/null'
-		set v2ray.main.error_log='/dev/null'
-		set v2ray.main.enabled='0'
-		set v2ray.main.outbounds='omrout'
-		set v2ray.main.inbounds='omr'
-		add_list v2ray.main.inbounds='omrtest'
-		set v2ray.main_dns=dns
-		set v2ray.main_dns.hosts='example.com|127.0.0.1'
-		set v2ray.main_dns.enabled='0'
-		set v2ray.main_policy=policy
-		set v2ray.main_policy.enabled='1'
-		set v2ray.main_policy.levels='policy_level_0'
-		set v2ray.policy_level_0=policy_level
-		set v2ray.policy_level_0.level='0'
-		set v2ray.policy_level_0.handshake='4'
-		set v2ray.policy_level_0.conn_idle='1200'
-		set v2ray.policy_level_0.uplink_only='0'
-		set v2ray.policy_level_0.downlink_only='0'
-		set v2ray.policy_level_0.buffer_size='512'
-		set v2ray.main_transparent_proxy=transparent_proxy
-		set v2ray.main_transparent_proxy.proxy_mode='default'
-		set v2ray.main_transparent_proxy.apnic_delegated_mirror='apnic'
-		set v2ray.main_transparent_proxy.gfwlist_mirror='github'
-		set v2ray.main_transparent_proxy.redirect_udp='1'
-		set v2ray.main_transparent_proxy.redirect_port='1897'
-		set v2ray.omrout=outbound
-		set v2ray.omrout.tag='omrout_tunnel'
-		set v2ray.omrout.protocol='vless'
-		set v2ray.omrout.s_vmess_address=''
-		set v2ray.omrout.s_vmess_port='65228'
-		set v2ray.omrout.s_vmess_user_id=''
-		set v2ray.omrout.s_vmess_user_security='none'
-		set v2ray.omrout.s_vmess_user_alter_id='0'
-		set v2ray.omrout.s_vless_address=''
-		set v2ray.omrout.s_vless_port='65228'
-		set v2ray.omrout.s_vless_user_id=''
-		set v2ray.omrout.s_vless_user_security='none'
-		set v2ray.omrout.s_vless_user_encryption='none'
-		set v2ray.omrout.s_vless_user_alter_id='0'
-		set v2ray.omrout.ss_network='tcp'
-		set v2ray.omrout.ss_security='tls'
-		set v2ray.omrout.ss_tls_allow_insecure='1'
-		set v2ray.omrout.ss_tls_disable_system_root='1'
-		set v2ray.omrout.ss_tls_cert_usage='verify'
-		set v2ray.omrout.ss_tls_cert_file='/etc/luci-uploads/client.crt'
-		set v2ray.omrout.ss_tls_key_file='/etc/luci-uploads/client.key'
-		set v2ray.omrout.mux_concurrency='8'
-		set v2ray.omr=inbound
-		set v2ray.omr.tag='omrtunnel'
-		set v2ray.omr.listen='0.0.0.0'
-		set v2ray.omr.port='1897'
-		set v2ray.omr.protocol='dokodemo-door'
-		set v2ray.omr.s_dokodemo_door_network='tcp'
-		add_list v2ray.omr.s_dokodemo_door_network='udp'
-		set v2ray.omr.ss_sockopt_tproxy='redirect'
-		set v2ray.omr.ss_sockopt_tcp_fast_open='1'
-		set v2ray.omr.s_dokodemo_door_follow_redirect='1'
-		set v2ray.omr6=inbound
-		set v2ray.omr6.tag='omrtunnel6'
-		set v2ray.omr6.listen='::'
-		set v2ray.omr6.port='1898'
-		set v2ray.omr6.protocol='dokodemo-door'
-		set v2ray.omr6.s_dokodemo_door_network='tcp'
-		add_list v2ray.omr6.s_dokodemo_door_network='udp'
-		set v2ray.omr6.ss_sockopt_tproxy='tproxy'
-		set v2ray.omr6.ss_sockopt_tcp_fast_open='1'
-		set v2ray.omr6.s_dokodemo_door_follow_redirect='1'
-		set v2ray.omrtest=inbound
-		set v2ray.omrtest.port='1111'
-		set v2ray.omrtest.protocol='socks'
-		set v2ray.omrtest.listen='127.0.0.1'
-		set v2ray.omrtest.s_socks_auth='noauth'
-		set v2ray.omrtest.s_socks_udp='1'
-		set v2ray.omrtest.s_socks_ip='127.0.0.1'
-		set v2ray.omrtest.s_socks_userlevel='0'
-		commit v2ray
-	EOF
-fi
-uci -q batch <<-EOF >/dev/null
-	set v2ray.omr.listen='0.0.0.0'
-	commit v2ray
-EOF
-
-if [ "$(uci -q get firewall.v2ray)" = "" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set firewall.v2ray=include
-		set firewall.v2ray.path=/etc/firewall.v2ray-rules
-		set firewall.v2ray.reload=0
-		commit firewall
-	EOF
-fi
-if [ "$(uci -q get firewall.v2ray.path)" != "/etc/firewall.v2ray-rules" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set firewall.v2ray.path=/etc/firewall.v2ray-rules
-		commit firewall
-	EOF
-fi
-
-if [ "$(uci -q get v2ray.main_reverse.bridges | grep omrbridge)" = "" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set v2ray.main_reverse=reverse
-		set v2ray.main_reverse.enabled=1
-		set v2ray.main_reverse.bridges='omrbridge|omr.lan'
-		commit v2ray
-	EOF
-fi
-if [ "$(uci -q get v2ray.omrrouting)" = "" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set v2ray.omrexit=outbound
-		set v2ray.omrexit.protocol='freedom'
-		set v2ray.omrexit.tag='out'
-		add_list v2ray.main.outbounds=omrexit
-		set v2ray.omrrouting=routing_rule
-		set v2ray.omrrouting.type='field'
-		set v2ray.omrrouting.inbound_tag='omrbridge'
-		set v2ray.omrrouting.outbound_tag='omrout_tunnel'
-		set v2ray.omrrouting.domain='full:omr.lan'
-		set v2ray.omrroutingo=routing_rule
-		set v2ray.omrroutingo.type='field'
-		set v2ray.omrroutingo.inbound_tag='omrbridge'
-		set v2ray.omrroutingo.outbound_tag='out'
-		set v2ray.main_routing=routing
-		set v2ray.main_routing.enabled=1
-		set v2ray.main_routing.rules='omrrouting'
-		add_list v2ray.main_routing.rules='omrroutingo'
-		commit v2ray
-	EOF
-fi
-
-if [ "$(uci -q get v2ray.main.error_log)" != "/dev/null" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set v2ray.main.error_log='/dev/null'
-		commit v2ray
-	EOF
-fi
-#if [ "$(uci -q get v2ray.main.mem_percentage)" = "0" ]; then
-#	uci -q batch <<-EOF >/dev/null
-#		set v2ray.main.mem_percentage='80'
-#		commit v2ray
-#	EOF
-#fi
-if [ "$(uci -q get v2ray.policy_level_0.conn_idle)" = "2400" ]; then
-	uci -q batch <<-EOF >/dev/null
-		set v2ray.policy_level_0.conn_idle='1200'
-		commit v2ray
-	EOF
-fi
-
-exit 0

v2ray-core/files/usr/bin/v2ray-rules

@@ -1,307 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
-# Copyright (C) 2018-2021 Ycarus (Yannick Chabanois) <ycarus@zugaina.org> for OpenMPTCProuter
-#
-# The design idea was derived from ss-rules by Jian Chang <aa65535@live.com>
-#
-# This is free software, licensed under the GNU General Public License v3.
-# See /LICENSE for more information.
-#
-
-v2r_rules_usage() {
-	cat >&2 <<EOF
-Usage: v2ray-rules [options]
-
-	-h, --help      Show this help message then exit
-	-f, --flush     Flush rules, ipset then exit
-	-l <port>       Local port number of ss-redir with TCP mode
-	-L <port>       Local port number of ss-redir with UDP mode
-	-s <ips>        List of ip addresses of remote shadowsocks server
-	--ifnames       Only apply rules on packets from these ifnames
-	--src-bypass <ips|cidr>
-	--src-forward <ips|cidr>
-	--src-checkdst <ips|cidr>
-	--src-default <bypass|forward|checkdst>
-	                Packets will have their src ip checked in order against
-	                bypass, forward, checkdst list and will bypass, forward
-	                through, or continue to have their dst ip checked
-	                respectively on the first match.  Otherwise, --src-default
-	                decide the default action
-	--dst-bypass <ips|cidr>
-	--dst-forward <ips|cidr>
-	--dst-bypass-file <file>
-	--dst-forward-file <file>
-	--dst-default <bypass|forward>
-	                Same as with their --src-xx equivalent
-	--dst-forward-recentrst
-	                Forward those packets whose destinations have recently
-	                sent to us multiple tcp-rst packets
-	--local-default <bypass|forward|checkdst>
-	                Default action for local out TCP traffic
-
-The following ipsets will be created by ss-rules.  They are also intended to be
-populated by other programs like dnsmasq with ipset support
-
-	ss_rules_src_bypass
-	ss_rules_src_forward
-	ss_rules_src_checkdst
-	ss_rules_dst_bypass
-	ss_rules_dst_bypass_all
-	ss_rules_dst_forward
-EOF
-}
-
-o_dst_bypass_="
-	0.0.0.0/8
-	10.0.0.0/8
-	100.64.0.0/10
-	127.0.0.0/8
-	169.254.0.0/16
-	172.16.0.0/12
-	192.0.0.0/24
-	192.0.2.0/24
-	192.31.196.0/24
-	192.52.193.0/24
-	192.88.99.0/24
-	192.168.0.0/16
-	192.175.48.0/24
-	198.18.0.0/15
-	198.51.100.0/24
-	203.0.113.0/24
-	224.0.0.0/4
-	240.0.0.0/4
-	255.255.255.255
-"
-o_src_default=bypass
-o_dst_default=bypass
-o_local_default=bypass
-
-__errmsg() {
-	echo "v2ray-rules: $*" >&2
-}
-
-v2r_rules_parse_args() {
-	while [ "$#" -gt 0 ]; do
-		case "$1" in
-			-h|--help) v2r_rules_usage; exit 0;;
-			-f|--flush) v2r_rules_flush; exit 0;;
-			-l) o_redir_tcp_port="$2"; shift 2;;
-			-L) o_redir_udp_port="$2"; shift 2;;
-			-s) o_remote_servers="$2"; shift 2;;
-			--ifnames) o_ifnames="$2"; shift 2;;
-			--ipt-extra) o_ipt_extra="$2"; shift 2;;
-			--src-default) o_src_default="$2"; shift 2;;
-			--dst-default) o_dst_default="$2"; shift 2;;
-			--local-default) o_local_default="$2"; shift 2;;
-			--src-bypass) o_src_bypass="$2"; shift 2;;
-			--src-forward) o_src_forward="$2"; shift 2;;
-			--src-checkdst) o_src_checkdst="$2"; shift 2;;
-			--dst-bypass) o_dst_bypass="$2"; shift 2;;
-			--dst-bypass_all) o_dst_bypass_all="$2"; shift 2;;
-			--dst-forward) o_dst_forward="$2"; shift 2;;
-			--dst-forward-recentrst) o_dst_forward_recentrst=1; shift 1;;
-			--dst-bypass-file) o_dst_bypass_file="$2"; shift 2;;
-			--dst-forward-file) o_dst_forward_file="$2"; shift 2;;
-			--rule-name) rule="$2"; shift 2;;
-			*) __errmsg "unknown option $1"; return 1;;
-		esac
-	done
-
-	if [ -z "$o_redir_tcp_port" -a -z "$o_redir_udp_port" ]; then
-		__errmsg "Requires at least -l or -L option"
-		return 1
-	fi
-	if [ -n "$o_dst_forward_recentrst" ] && ! iptables -w -m recent -h >/dev/null; then
-		__errmsg "Please install iptables-mod-conntrack-extra with opkg"
-		return 1
-	fi
-	o_remote_servers="$(for s in $o_remote_servers; do resolveip -4 "$s"; done)"
-}
-
-v2r_rules_flush() {
-	local setname
-
-	iptables-save --counters | grep -v v2r_ | iptables-restore -w --counters
-	while ip rule del fwmark 1 lookup 100 2>/dev/null; do true; done
-	ip route flush table 100 || true
-	for setname in $(ipset -n list | grep "ssr_${rule}"); do
-		ipset destroy "$setname" 2>/dev/null || true
-	done
-}
-
-v2r_rules_ipset_init() {
-	ipset --exist restore <<-EOF
-		create ssr_${rule}_src_bypass hash:net hashsize 64
-		create ssr_${rule}_src_forward hash:net hashsize 64
-		create ssr_${rule}_src_checkdst hash:net hashsize 64
-		create ss_rules_dst_bypass_all hash:net hashsize 64
-		create ssr_${rule}_dst_bypass hash:net hashsize 64
-		create ssr_${rule}_dst_bypass_ hash:net hashsize 64
-		create ssr_${rule}_dst_forward hash:net hashsize 64
-		create ss_rules_dst_forward_recentrst_ hash:ip hashsize 64 timeout 3600
-		$(v2r_rules_ipset_mkadd ssr_${rule}_dst_bypass_ "$o_dst_bypass_ $o_remote_servers")
-		$(v2r_rules_ipset_mkadd ss_rules_dst_bypass_all "$o_dst_bypass_all")
-		$(v2r_rules_ipset_mkadd ssr_${rule}_dst_bypass "$o_dst_bypass $(cat "$o_dst_bypass_file" 2>/dev/null | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')")
-		$(v2r_rules_ipset_mkadd ssr_${rule}_src_bypass "$o_src_bypass")
-		$(v2r_rules_ipset_mkadd ssr_${rule}_src_forward "$o_src_forward")
-		$(v2r_rules_ipset_mkadd ssr_${rule}_src_checkdst "$o_src_checkdst")
-		$(v2r_rules_ipset_mkadd ssr_${rule}_dst_forward "$o_dst_forward $(cat "$o_dst_forward_file" 2>/dev/null | grep -o '[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}')")
-	EOF
-}
-
-v2r_rules_ipset_mkadd() {
-	local setname="$1"; shift
-	local i
-
-	for i in $*; do
-		echo "add $setname $i"
-	done
-}
-
-v2r_rules_iptchains_init() {
-	v2r_rules_iptchains_init_mark
-	v2r_rules_iptchains_init_tcp
-	v2r_rules_iptchains_init_udp
-}
-
-v2r_rules_iptchains_init_mark() {
-	if [ "$(iptables -w -t mangle -L PREROUTING | grep ss_rules_dst_bypass_all)" = "" ]; then
-		iptables-restore -w --noflush <<-EOF
-			*mangle
-			-A PREROUTING -m set --match-set ss_rules_dst_bypass_all dst -j MARK --set-mark 0x539
-			COMMIT
-		EOF
-	fi
-}
-
-v2r_rules_iptchains_init_tcp() {
-	local local_target
-
-	[ -n "$o_redir_tcp_port" ] || return 0
-
-	v2r_rules_iptchains_init_ nat tcp
-
-	case "$o_local_default" in
-		checkdst) local_target=v2r_${rule}_dst ;;
-		forward) local_target=v2r_${rule}_forward ;;
-		bypass|*) return 0;;
-	esac
-
-	iptables-restore -w --noflush <<-EOF
-		*nat
-		:v2r_${rule}_local_out -
-		-I OUTPUT 1 -p tcp -j v2r_${rule}_local_out
-		-A v2r_${rule}_local_out -m set --match-set ssr_${rule}_dst_bypass dst -j RETURN
-		-A v2r_${rule}_local_out -m set --match-set ss_rules_dst_bypass_all dst -j RETURN
-		-A v2r_${rule}_local_out -m set --match-set ssr_${rule}_dst_bypass_ dst -j RETURN
-		-A v2r_${rule}_local_out -m mark --mark 0x539 -j RETURN
-		-A v2r_${rule}_local_out -p tcp $o_ipt_extra -j $local_target -m comment --comment "local_default: $o_local_default"
-		COMMIT
-	EOF
-}
-
-v2r_rules_iptchains_init_udp() {
-	[ -n "$o_redir_udp_port" ] || return 0
-	v2r_rules_iptchains_init_ mangle udp
-}
-
-v2r_rules_iptchains_init_() {
-	local table="$1"
-	local proto="$2"
-	local forward_rules
-	local src_default_target dst_default_target
-	local recentrst_mangle_rules recentrst_addset_rules
-
-	case "$proto" in
-		tcp)
-			forward_rules="-A v2r_${rule}_forward -p tcp -j REDIRECT --to-ports $o_redir_tcp_port"
-			if [ -n "$o_dst_forward_recentrst" ]; then
-				recentrst_mangle_rules="
-					*mangle
-					-I PREROUTING 1 -p tcp -m tcp --tcp-flags RST RST -m recent --name v2r_recentrst --set --rsource
-					COMMIT
-				"
-				recentrst_addset_rules="
-					-A v2r_${rule}_dst -m recent --name v2r_recentrst --rcheck --rdest --seconds 3 --hitcount 3 -j SET --add-set ss_rules_dst_forward_recentrst_ dst --exist
-					-A v2r_${rule}_dst -m set --match-set ss_rules_dst_forward_recentrst_ dst -j v2r_${rule}_forward
-				"
-			fi
-			;;
-		udp)
-			ip rule add fwmark 1 lookup 100 || true
-			ip route add local default dev lo table 100 || true
-			forward_rules="-A v2r_${rule}_forward -p udp -j TPROXY --on-port "$o_redir_udp_port" --tproxy-mark 0x01/0x01"
-			;;
-	esac
-	case "$o_src_default" in
-		forward) src_default_target=v2r_${rule}_forward ;;
-		checkdst) src_default_target=v2r_${rule}_dst ;;
-		bypass|*) src_default_target=RETURN ;;
-	esac
-	case "$o_dst_default" in
-		forward) dst_default_target=v2r_${rule}_forward ;;
-		bypass|*) dst_default_target=RETURN ;;
-	esac
-	sed -e '/^\s*$/d' -e 's/^\s\+//' <<-EOF | iptables-restore -w --noflush
-		*$table
-		:v2r_${rule}_pre_src -
-		:v2r_${rule}_src -
-		:v2r_${rule}_dst -
-		:v2r_${rule}_forward -
-		$(v2r_rules_iptchains_mkprerules "$proto")
-		-A v2r_${rule}_pre_src -m set --match-set ssr_${rule}_dst_bypass_ dst -j RETURN
-		-A v2r_${rule}_pre_src -m set --match-set ss_rules_dst_bypass_all dst -j MARK --set-mark 0x539
-		-A v2r_${rule}_pre_src -m set --match-set ss_rules_dst_bypass_all dst -j RETURN
-		-A v2r_${rule}_pre_src -m set --match-set ssr_${rule}_dst_bypass dst -j RETURN
-		-A v2r_${rule}_pre_src -m mark --mark 0x539 -j RETURN
-		-A v2r_${rule}_dst -m set --match-set ss_rules_dst_bypass_all dst -j RETURN
-		-A v2r_${rule}_dst -m set --match-set ssr_${rule}_dst_bypass dst -j RETURN
-		-A v2r_${rule}_pre_src -p $proto $o_ipt_extra -j v2r_${rule}_src
-		-A v2r_${rule}_src -m set --match-set ssr_${rule}_src_bypass src -j RETURN
-		-A v2r_${rule}_src -m set --match-set ssr_${rule}_src_forward src -j v2r_${rule}_forward
-		-A v2r_${rule}_src -m set --match-set ssr_${rule}_src_checkdst src -j v2r_${rule}_dst
-		-A v2r_${rule}_src -j $src_default_target -m comment --comment "src_default: $o_src_default"
-		-A v2r_${rule}_dst -m set --match-set ssr_${rule}_dst_forward dst -j v2r_${rule}_forward
-		$recentrst_addset_rules
-		-A v2r_${rule}_dst -j $dst_default_target -m comment --comment "dst_default: $o_dst_default"
-		$forward_rules
-		COMMIT
-		$recentrst_mangle_rules
-	EOF
-}
-
-v2r_rules_iptchains_mkprerules() {
-	local proto="$1"
-
-	if [ -z "$o_ifnames" ]; then
-		echo "-A PREROUTING -p $proto -j v2r_${rule}_pre_src"
-	else
-		echo $o_ifnames \
-			| tr ' ' '\n' \
-			| sed "s/.*/-I PREROUTING 1 -i \\0 -p $proto -j v2r_${rule}_pre_src/"
-	fi
-}
-
-v2r_rules_fw_drop() {
-	fw3 -4 print 2>/dev/null | awk '/iptables/&&/zone_lan_forward/&&/tcp/&&/-t filter/&&/-j reject/ {for(i=6; i<=NF; i++) { printf "%s ",$i } print "\n" }' |
-	while IFS=$"\n" read -r c; do
-		fwrule=$(echo "$c" | sed 's/reject/REDIRECT --to-ports 65535/')
-		if [ -n "$fwrule" ] && [ -z "$(iptables-save | grep zone_lan_prerouting | grep '${fwrule}')" ]; then
-			eval "iptables -w -t nat -A zone_lan_prerouting ${fwrule} 2>&1 >/dev/null"
-		fi
-	done
-	fw3 -4 print 2>/dev/null | awk '/iptables/&&/zone_lan_forward/&&/tcp/&&/-t filter/&&/-j drop/ {for(i=6; i<=NF; i++) { printf "%s ",$i } print "\n" }' |
-	while IFS=$"\n" read -r c; do
-		fwrule=$(echo "$c" | sed 's/drop/REDIRECT --to-ports 65535/')
-		if [ -n "$fwrule" ] && [ -z "$(iptables-save | grep zone_lan_prerouting | grep '${fwrule}')" ]; then
-			eval "iptables -t nat -A zone_lan_prerouting ${fwrule} 2>&1 >/dev/null"
-		fi
-	done
-}
-
-v2r_rules_parse_args "$@"
-#v2r_rules_flush
-v2r_rules_ipset_init
-v2r_rules_iptchains_init
-v2r_rules_fw_drop

v2ray-core/files/usr/bin/v2ray-rules6

@@ -1,298 +0,0 @@
-#!/bin/sh -e
-#
-# Copyright (C) 2017 Yousong Zhou <yszhou4tech@gmail.com>
-# Copyright (C) 2018-2021 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
-#
-# The design idea was derived from ss-rules by Jian Chang <aa65535@live.com>
-#
-# This is free software, licensed under the GNU General Public License v3.
-# See /LICENSE for more information.
-#
-
-v2ray_rules6_usage() {
-	cat >&2 <<EOF
-Usage: v2ray-rules6 [options]
-
-	-h, --help      Show this help message then exit
-	-f, --flush     Flush rules, ipset then exit
-	-l <port>       Local port number of ss-redir with TCP mode
-	-L <port>       Local port number of ss-redir with UDP mode
-	-s <ips>        List of ip addresses of remote shadowsocks server
-	--ifnames       Only apply rules on packets from these ifnames
-	--src-bypass <ips|cidr>
-	--src-forward <ips|cidr>
-	--src-checkdst <ips|cidr>
-	--src-default <bypass|forward|checkdst>
-	                Packets will have their src ip checked in order against
-	                bypass, forward, checkdst list and will bypass, forward
-	                through, or continue to have their dst ip checked
-	                respectively on the first match.  Otherwise, --src-default
-	                decide the default action
-	--dst-bypass <ips|cidr>
-	--dst-forward <ips|cidr>
-	--dst-bypass-file <file>
-	--dst-forward-file <file>
-	--dst-default <bypass|forward>
-	                Same as with their --src-xx equivalent
-	--dst-forward-recentrst
-	                Forward those packets whose destinations have recently
-	                sent to us multiple tcp-rst packets
-	--local-default <bypass|forward|checkdst>
-	                Default action for local out TCP traffic
-
-The following ipsets will be created by ss-rules.  They are also intended to be
-populated by other programs like dnsmasq with ipset support
-
-	v2ray_rules6_src_bypass
-	v2ray_rules6_src_forward
-	v2ray_rules6_src_checkdst
-	v2ray_rules6_dst_bypass
-	v2ray_rules6_dst_forward
-EOF
-}
-
-o_dst_bypass_="
-	fe80::/10
-	fd00::/8
-	::1
-"
-o_src_default=bypass
-o_dst_default=bypass
-o_local_default=bypass
-
-__errmsg() {
-	echo "ss-rules6: $*" >&2
-}
-
-v2ray_rules6_parse_args() {
-	while [ "$#" -gt 0 ]; do
-		case "$1" in
-			-h|--help) v2ray_rules6_usage; exit 0;;
-			-f|--flush) v2ray_rules6_flush; exit 0;;
-			-l) o_redir_tcp_port="$2"; shift 2;;
-			-L) o_redir_udp_port="$2"; shift 2;;
-			-s) o_remote_servers="$2"; shift 2;;
-			--ifnames) o_ifnames="$2"; shift 2;;
-			--ipt-extra) o_ipt_extra="$2"; shift 2;;
-			--src-default) o_src_default="$2"; shift 2;;
-			--dst-default) o_dst_default="$2"; shift 2;;
-			--local-default) o_local_default="$2"; shift 2;;
-			--src-bypass) o_src_bypass="$2"; shift 2;;
-			--src-forward) o_src_forward="$2"; shift 2;;
-			--src-checkdst) o_src_checkdst="$2"; shift 2;;
-			--dst-bypass) o_dst_bypass="$2"; shift 2;;
-			--dst-bypass_all) o_dst_bypass_all="$2"; shift 2;;
-			--dst-forward) o_dst_forward="$2"; shift 2;;
-			--dst-forward-recentrst) o_dst_forward_recentrst=1; shift 1;;
-			--dst-bypass-file) o_dst_bypass_file="$2"; shift 2;;
-			--dst-forward-file) o_dst_forward_file="$2"; shift 2;;
-			--rule-name) rule="$2"; shift 2;;
-			*) __errmsg "unknown option $1"; return 1;;
-		esac
-	done
-
-	if [ -z "$o_redir_tcp_port" -a -z "$o_redir_udp_port" ]; then
-		__errmsg "Requires at least -l or -L option"
-		return 1
-	fi
-	if [ -n "$o_dst_forward_recentrst" ] && ! ip6tables -w -m recent -h >/dev/null; then
-		__errmsg "Please install ip6tables-mod-conntrack-extra with opkg"
-		return 1
-	fi
-	o_remote_servers="$(for s in $o_remote_servers; do resolveip -6 "$s"; done)"
-}
-
-v2ray_rules6_flush() {
-	local setname
-
-	ip6tables-save --counters | grep -v v2r6_ | ip6tables-restore -w --counters
-	while ip -f inet6 rule del fwmark 1 lookup 100 2>/dev/null; do true; done
-	ip -f inet6 route flush table 100 || true
-	for setname in $(ipset -n list | grep "ssr6_${rule}"); do
-		ipset destroy "$setname" 2>/dev/null || true
-	done
-}
-
-v2ray_rules6_ipset_init() {
-	ipset --exist restore <<-EOF
-		create ssr6_${rule}_src_bypass hash:net family inet6 hashsize 64
-		create ssr6_${rule}_src_forward hash:net family inet6 hashsize 64
-		create ssr6_${rule}_src_checkdst hash:net family inet6 hashsize 64
-		create ssr6_${rule}_dst_bypass hash:net family inet6 hashsize 64
-		create ss_rules6_dst_bypass_all hash:net family inet6 hashsize 64
-		create ssr6_${rule}_dst_bypass_ hash:net family inet6 hashsize 64
-		create ssr6_${rule}_dst_forward hash:net family inet6 hashsize 64
-		create ss_rules6_dst_forward_recrst_ hash:ip family inet6 hashsize 64 timeout 3600
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_dst_bypass_ "$o_dst_bypass_ $o_remote_servers")
-		$(v2ray_rules6_ipset_mkadd ss_rules6_dst_bypass_all "$o_dst_bypass $(cat "$o_dst_bypass_file" 2>/dev/null | grep -o '\([0-9a-fA-F]\{0,4\}:\)\{1,7\}[0-9a-fA-F]\{0,4\}')")
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_dst_bypass "$o_dst_bypass $(cat "$o_dst_bypass_file" 2>/dev/null | grep -o '\([0-9a-fA-F]\{0,4\}:\)\{1,7\}[0-9a-fA-F]\{0,4\}')")
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_src_bypass "$o_src_bypass")
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_src_forward "$o_src_forward")
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_src_checkdst "$o_src_checkdst")
-		$(v2ray_rules6_ipset_mkadd ssr6_${rule}_dst_forward "$o_dst_forward $(cat "$o_dst_forward_file" 2>/dev/null | grep -o '\([0-9a-fA-F]\{0,4\}:\)\{1,7\}[0-9a-fA-F]\{0,4\}')")
-	EOF
-}
-
-v2ray_rules6_ipset_mkadd() {
-	local setname="$1"; shift
-	local i
-
-	for i in $*; do
-		echo "add $setname $i"
-	done
-}
-
-v2ray_rules6_iptchains_init() {
-	v2ray_rules6_iptchains_init_mark
-	v2ray_rules6_iptchains_init_tcp
-	v2ray_rules6_iptchains_init_udp
-}
-
-v2ray_rules6_iptchains_init_mark() {
-	ip6tables-restore -w --noflush <<-EOF
-		*mangle
-		-A PREROUTING -m set --match-set ss_rules6_dst_bypass_all dst -j MARK --set-mark 0x6539
-		COMMIT
-	EOF
-}
-
-
-v2ray_rules6_iptchains_init_tcp() {
-	local local_target
-
-	[ -n "$o_redir_tcp_port" ] || return 0
-
-	#v2ray_rules6_iptchains_init_ nat tcp
-	v2ray_rules6_iptchains_init_ mangle tcp
-
-	case "$o_local_default" in
-		checkdst) local_target=v2r6_${rule}_dst ;;
-		forward) local_target=v2r6_${rule}_forward ;;
-		bypass|*) return 0;;
-	esac
-
-#	echo "tcp mangle"
-#	ip6tables-restore -w --noflush <<-EOF
-#		*mangle
-#		:v2r6_${rule}_local_out -
-#		-I OUTPUT 1 -p tcp -j v2r6_${rule}_local_out
-#		-A v2r6_${rule}_local_out -m set --match-set ss_rules6_dst_bypass dst -j RETURN
-#		-A v2r6_${rule}_local_out -m set --match-set ss_rules6_dst_bypass_all dst -j RETURN
-#		-A v2r6_${rule}_local_out -m set --match-set ss_rules6_dst_bypass_ dst -j RETURN
-#		-A v2r6_${rule}_local_out -m mark --mark 0x6539 -j RETURN
-#		-A v2r6_${rule}_local_out -p tcp $o_ipt_extra -j $local_target -m comment --comment "local_default: $o_local_default"
-#		COMMIT
-#	EOF
-#	echo "done"
-}
-
-v2ray_rules6_iptchains_init_udp() {
-	[ -n "$o_redir_udp_port" ] || return 0
-	v2ray_rules6_iptchains_init_ mangle udp
-}
-
-v2ray_rules6_iptchains_init_() {
-	local table="$1"
-	local proto="$2"
-	local forward_rules
-	local src_default_target dst_default_target
-	local recentrst_mangle_rules recentrst_addset_rules
-
-	case "$proto" in
-		tcp)
-			#forward_rules="-A v2r6_${rule}_forward -p tcp -j REDIRECT --to-ports $o_redir_tcp_port"
-			forward_rules="-A v2r6_${rule}_forward -p tcp -j TPROXY --on-port $o_redir_tcp_port --tproxy-mark 0x01/0x01"
-			if [ -n "$o_dst_forward_recentrst" ]; then
-				recentrst_mangle_rules="
-					*mangle
-					-I PREROUTING 1 -p tcp -m tcp --tcp-flags RST RST -m recent --name ss_rules6_recentrst --set --rsource
-					COMMIT
-				"
-				recentrst_addset_rules="
-					-A v2r6_${rule}_dst -m recent --name ss_rules6_recentrst --rcheck --rdest --seconds 3 --hitcount 3 -j SET --add-set ss_rules6_dst_forward_recrst_ dst --exist
-					-A v2r6_${rule}_dst -m set --match-set ss_rules6_dst_forward_recrst_ dst -j v2r6_${rule}_forward
-				"
-			fi
-			;;
-		udp)
-			ip -f inet6 rule add fwmark 1 lookup 100 || true
-			ip -f inet6 route add local default dev lo table 100 || true
-			forward_rules="
-				-A v2r6_${rule}_forward -p udp -j TPROXY --on-port "$o_redir_udp_port" --tproxy-mark 0x01/0x01
-				-A v2r6_${rule}_forward -p tcp -j TPROXY --on-port "$o_redir_udp_port" --tproxy-mark 0x01/0x01
-			"
-			;;
-	esac
-	case "$o_src_default" in
-		forward) src_default_target=v2r6_${rule}_forward ;;
-		checkdst) src_default_target=v2r6_${rule}_dst ;;
-		bypass|*) src_default_target=RETURN ;;
-	esac
-	case "$o_dst_default" in
-		forward) dst_default_target=v2r6_${rule}_forward ;;
-		bypass|*) dst_default_target=RETURN ;;
-	esac
-	sed -e '/^\s*$/d' -e 's/^\s\+//' <<-EOF | ip6tables-restore -w --noflush
-		*$table
-		:v2r6_${rule}_pre_src -
-		:v2r6_${rule}_src -
-		:v2r6_${rule}_dst -
-		:v2r6_${rule}_forward -
-		$(v2ray_rules6_iptchains_mkprerules "udp")
-		$(v2ray_rules6_iptchains_mkprerules "tcp")
-		-A v2r6_${rule}_pre_src -m set --match-set ssr6_${rule}_dst_bypass_ dst -j RETURN
-		-A v2r6_${rule}_pre_src -m set --match-set ss_rules6_dst_bypass_all dst -j MARK --set-mark 0x6539
-		-A v2r6_${rule}_pre_src -m set --match-set ss_rules6_dst_bypass_all dst -j RETURN
-		-A v2r6_${rule}_pre_src -m set --match-set ssr6_${rule}_dst_bypass dst -j RETURN
-		-A v2r6_${rule}_pre_src -m mark --mark 0x6539 -j RETURN
-		-A v2r6_${rule}_dst -m set --match-set ss_rules6_dst_bypass_all dst -j RETURN
-		-A v2r6_${rule}_dst -m set --match-set ssr6_${rule}_dst_bypass dst -j RETURN
-		-A v2r6_${rule}_pre_src -p tcp $o_ipt_extra -j v2r6_${rule}_src
-		-A v2r6_${rule}_pre_src -p udp $o_ipt_extra -j v2r6_${rule}_src
-		-A v2r6_${rule}_src -m set --match-set ssr6_${rule}_src_bypass src -j RETURN
-		-A v2r6_${rule}_src -m set --match-set ssr6_${rule}_src_forward src -j v2r6_${rule}_forward
-		-A v2r6_${rule}_src -m set --match-set ssr6_${rule}_src_checkdst src -j v2r6_${rule}_dst
-		-A v2r6_${rule}_src -j $src_default_target -m comment --comment "src_default: $o_src_default"
-		-A v2r6_${rule}_dst -m set --match-set ssr6_${rule}_dst_forward dst -j v2r6_${rule}_forward
-		$recentrst_addset_rules
-		-A v2r6_${rule}_dst -j $dst_default_target -m comment --comment "dst_default: $o_dst_default"
-		$forward_rules
-		COMMIT
-		$recentrst_mangle_rules
-	EOF
-}
-
-v2ray_rules6_iptchains_mkprerules() {
-	local proto="$1"
-
-	if [ -z "$o_ifnames" ]; then
-		echo "-A PREROUTING -p $proto -j v2r6_${rule}_pre_src"
-	else
-		echo $o_ifnames \
-			| tr ' ' '\n' \
-			| sed "s/.*/-I PREROUTING 1 -i \\0 -p $proto -j v2r6_${rule}_pre_src/"
-	fi
-}
-
-v2ray_rules6_fw_drop() {
-	fw3 -6 print 2>/dev/null | awk '/iptables/&&/zone_lan_forward/&&/tcp/&&/-t filter/&&/-j reject/ {for(i=6; i<=NF; i++) { printf "%s ",$i } print "\n" }' |
-	while IFS=$"\n" read -r c; do
-		fwrule=$(echo "$c" | sed 's/reject/REDIRECT --to-ports 65535/')
-		if [ -n "$fwrule" ] && [ -z "$(iptables-save | grep zone_lan_prerouting | grep '${fwrule}')" ]; then
-			eval "ip6tables -w -t nat -A zone_lan_prerouting ${fwrule} 2>&1 >/dev/null"
-		fi
-	done
-	fw3 -6 print 2>/dev/null | awk '/iptables/&&/zone_lan_forward/&&/tcp/&&/-t filter/&&/-j drop/ {for(i=6; i<=NF; i++) { printf "%s ",$i } print "\n" }' |
-	while IFS=$"\n" read -r c; do
-		fwrule=$(echo "$c" | sed 's/drop/REDIRECT --to-ports 65535/')
-		if [ -n "$fwrule" ] && [ -z "$(iptables-save | grep zone_lan_prerouting | grep '${fwrule}')" ]; then
-			eval "ip6tables -t nat -A zone_lan_prerouting ${fwrule} 2>&1 >/dev/null"
-		fi
-	done
-}
-
-v2ray_rules6_parse_args "$@"
-v2ray_rules6_flush
-v2ray_rules6_ipset_init
-v2ray_rules6_iptchains_init
-v2ray_rules6_fw_drop

v2ray-ext/Makefile

@@ -1,43 +0,0 @@
-#
-# Copyright (C) 2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=v2ray-ext
-PKG_RELEASE:=1
-
-PKG_SOURCE_PROTO:=git
-PKG_SOURCE_URL:=https://github.com/v2ray/ext.git
-PKG_SOURCE_VERSION:=9eb3057da9bf83f83f4f1bda8528d0567419e709
-PKG_SOURCE_DATE:=20190725
-
-PKG_LICENSE:=BSD-3-Clause
-PKG_LICENSE_FILES:=LICENSE
-
-PKG_BUILD_DEPENDS:=golang/host
-PKG_BUILD_PARALLEL:=1
-
-GO_PKG:=v2ray.com/ext
-GO_PKG_SOURCE_ONLY:=1
-
-include $(INCLUDE_DIR)/package.mk
-include ../golang/golang-package.mk
-
-define Package/v2ray-ext-dev
-$(call GoPackage/GoSubMenu)
-  TITLE:=Go support for Google protocol buffers
-  URL:=https://github.com/golang/protobuf
-  DEPENDS:=$(GO_ARCH_DEPENDS) +protobuf
-  PKGARCH:=all
-endef
-
-define Package/v2ray-ext-dev/description
-Go support for Google protocol buffers
-endef
-
-$(eval $(call GoSrcPackage,v2ray-ext-dev))
-$(eval $(call BuildPackage,v2ray-ext-dev))