<%:Wizard%>

<%:Server settings%> <% nbserver=0 uci:foreach("openmptcprouter","server", function(s) nbserver=nbserver+1 end) uci:foreach("openmptcprouter","server", function(s) servername = s[".name"] %>

<%=servername%>

<%:Server IP%>

" data-optional="false">

<%:Server IP will be set for proxy and VPN%>

<%:Server username%>

" data-optional="false">

<%:API username to retrieve personnalized settings from the server.%>

<%:Server key%>

" data-optional="false">

<%:Key to configure and retrieve others keys from Server and to set server settings from OpenMPTCProuter.%>

<% if nbserver > 1 then %>

<%:Set server as master%>

checked<% end %>/>

<%:Only one server can be master, else all servers are set as backup.%>

<% end %>

<%:Disable server%>

checked<% end %>/>

<% end) %>

<%:Common server settings%>

<%:Advanced settings%>

<%:Retrieve settings from server%>

<%:Force retrieve settings%>

<%:Force retrieve all keys from server.%>

<%:IPv6 settings%>

<%:Enable IPv6%>

checked<% end %> />

<%:You should disable IPv6 here if server doesn't provide IPv6.%>

<%:IPv6 Prefix%>

" />

<%:You can use a public IPv6 prefix only if you set only one server.%>

<%:Proxy settings%>

<%:By default proxy is used for any traffic that is TCP (and UDP for V2Ray).%>

<%:Default Proxy%>

<%:Set the default Proxy used for TCP when ShadowSocks is enabled, for TCP and UDP when V2Ray is enabled.%> <%:Only ShadowSocks is supported with server multiple IPs for now.%>

<%:ShadowSocks key%>

" />

<%:Key is retrieved from server API by default.%> <%:ShadowSocks is used for TCP.%>

<%:V2Ray user id%>

" />

<%:Key is retrieved from server API by default.%> <%:V2Ray is used for TCP and UDP.%>

<%:Encryption%>

<% if ut.trim(sys.exec("cat /proc/cpuinfo | grep aes")) ~= "" then %> <%:An Advanced Encryption Standard (AES) instruction set is integrated in the processor.%> <% else %> <%:There is no Advanced Encryption Standard (AES) instruction set integrated in the processor, you should use chacha20.%> <% end %> <%:Encryption method is used for Shadowsocks, V2Ray, Glorytun and OpenVPN.%>

<%:VPN settings%>

<%:By default VPN is used for any traffic that is not TCP.%>

<% if nixio.fs.access("/usr/sbin/glorytun") or nixio.fs.access("/usr/sbin/glorytun-udp") then %>

<%:Glorytun key%>

<%:Key is retrieved from server API by default.%> <%:Glorytun TCP is used by default for UDP and ICMP%>

<% end %> <% if nixio.fs.access("/usr/sbin/dsvpn") then %>

<%:A Dead Simple VPN key%>

<%:Key is retrieved from server API by default.%> <%:A Dead Simple VPN is a TCP VPN that can replace Glorytun TCP%>

<% end %> <% if nixio.fs.access("/usr/sbin/mlvpn") then %>

<%:MLVPN password%>

<%:Key is retrieved from server API by default.%> <%:MLVPN can replace Glorytun with connections with same latency%>

<% end %> <% if nixio.fs.access("/usr/sbin/ubond") then %>

<%:UBOND password%>

<%:Key is retrieved from server API by default.%> <%:UBOND can replace Glorytun with connections with same latency%>

<% end %>

<%:Default VPN%>

<%:Set the default VPN used for ICMP (and UDP if proxy used is shadowsocks), for all traffic if proxy is disabled.%> <%:All VPN available here can do aggregation over MPTCP or using own internal method.%> <%:OpenVPN can't be used in multi VPS configuration.%>

<%:LAN interfaces settings%> <% for _, iface in ipairs(net:get_networks()) do local ifname = iface:name() local firewall_lan = luci.util.trim(luci.sys.exec("uci -q get firewall.@zone[0].network | grep " .. ifname)) if firewall_lan ~= "" then %>

<%=ifname%>

<%:Label%>

<%:Label for the interface%>

<%:Protocol%>

<% findproto = 0 %>

<%:You can use DHCP if you have multiple real ethernet ports.%>

<% if uci:get("network",ifname,"type") ~= "bridge" then %>

<%:Physical interface%>

<%:Choose physical interface.%>

<% end %>

<%:IPv4 address%>

" data-type="ip4addr">

<%:IPv4 netmask%>

" data-type="ip4addr">

<% end end %>

<%:Interfaces settings%>

<%:You must disable DHCP on your modems and set IP in different networks.%>

<% for _, iface in ipairs(net:get_networks()) do local ifname = iface:name() local firewall_wan = luci.util.trim(luci.sys.exec("uci -q get firewall.@zone[1].network | grep " .. ifname)) if firewall_wan ~= "" then -- local multipath = uci:get("network",ifname,"multipath") -- local multipathvpn = uci:get("openmptcprouter",ifname,"multipathvpn") -- local vpn = uci:get("openmptcprouter",ifname,"vpn") -- if (multipath ~= nil and multipath ~= "off" and vpn ~= "1") or multipathvpn == "1" then %>

<%=ifname%>

<%:Label%>

<%:Label for the interface%>

<%:Type%>

<%:Choose MacVLAN if you want to create a virtual interface based on a physical interface.%>

<%:Physical interface%>

<%:Choose physical interface.%>

<%:Protocol%>

<% findproto = 0 %>

<%:You can use DHCP if you have multiple real ethernet ports. Select other if you want to use another protocol available in Network Interfaces page.%>

<%:Physical interface%>

<%:Choose physical interface.%>

<%:IPv4 address%>

" data-type="ip4addr">

<%:Set an IP in the same network as the modem%>

<%:IPv4 netmask%>

" data-type="ip4addr">

<%:IPv4 gateway%>

" data-type="ip4addr">

<%:Set here IP of the modem%>

<%:Device%>

<%:APN%>

<%:PIN code%>

<%:Service Type%>

<%:Authentication Type%>

<%:PAP/CHAP username%>

<%:PAP/CHAP password%>

<%:Modem init timeout%>

<% if uci:get("openmptcprouter",ifname,"multipathvpn") == "1" then %>

<%:Multipath TCP%>

<% else %>

<%:Multipath TCP%>

<% end %> <% local download = "0" local upload = "0" download = uci:get("network",ifname,"downloadspeed") or "0" upload = uci:get("network",ifname,"uploadspeed") or "0" --if download == "0" or upload == "0" then -- if nixio.fs.access("/etc/init.d/sqm") then -- download = uci:get("sqm",ifname,"download") -- upload = uci:get("sqm",ifname,"upload") -- else -- download = uci:get("qos",ifname,"download") -- upload = uci:get("qos",ifname,"upload") -- end --end %>

<%:MPTCP over VPN%>

checked<% end %> />

<%:You can enable MPTCP over VPN if your provider filter Multipath TCP.%>

<%:Enable SQM%>

checked<% end %> />

<%:You should disable SQM for LTE or any interfaces with variable speed.%>

<%:Download speed (Kb/s)%>

<%:Used by Glorytun UDP and SQM/QoS if enabled. 0 to use default value.%>

<%:Upload speed (Kb/s)%>

<%:Used by Glorytun UDP and SQM/QoS if enabled. 0 to use default value.%>

<% end end %>

<%:Select the device you want to base the interface on.%>