#!/bin/sh /etc/rc.common
# Copyright (C) 2018-2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
# Released under GPL 3. See LICENSE for the full terms.

START=99

USE_PROCD=1

EXTRA_COMMANDS="set_pihole backup_send backup_get backup_list set_vps_firewall get_openvpn_key set_gre_tunnel token"

. /usr/lib/unbound/iptools.sh

if [ -f /usr/sbin/iptables-legacy ]; then
	IPTABLES="/usr/sbin/iptables-legacy"
	IPTABLESRESTORE="/usr/sbin/iptables-legacy-restore"
	IPTABLESSAVE="/usr/sbin/iptables-legacy-save"
	IP6TABLES="/usr/sbin/ip6tables-legacy"
	IP6TABLESRESTORE="/usr/sbin/ip6tables-legacy-restore"
	IP6TABLESSAVE="/usr/sbin/ip6tables-legacy-save"
else
	IPTABLES="/usr/sbin/iptables"
	IPTABLESRESTORE="/usr/sbin/iptables-restore"
	IPTABLESSAVE="/usr/sbin/iptables-save"
	IP6TABLES="/usr/sbin/ip6tables"
	IP6TABLESRESTORE="/usr/sbin/ip6tables-restore"
	IP6TABLESSAVE="/usr/sbin/ip6tables-save"
fi


_parse_result() {
	result=$("echo $1 | jsonfilter -q -e '@.result'")
	echo $result
}

_login() {
	local username password auth
	#server="$(uci -q get openmptcprouter.${servername}.ip)"
	#[ -z "$server" ] && server="$(uci -q get shadowsocks-libev.sss0.server)"
	username="$(uci -q get openmptcprouter.${servername}.username)"
	password="$(uci -q get openmptcprouter.${servername}.password)"
	serverport="$(uci -q get openmptcprouter.${servername}.port)"
	#[ -z "$server" ] && server="$(uci -q get openmptcprouter.${servername}.ip)"
	if [ -z "$token" ]; then
		login_on_server() {
			server=$1
			#auth=`curl --max-time 10 -s -k -H "Content-Type: application/json" -X POST -d '{"username":"'$username'","password":"'$password'"}' https://$server:$serverport/login`
			resolve="$(resolveip $server)"
			valid_ip6=$(valid_subnet6 $server)
			if [ "$resolve" != "$server" ] || [ "$valid_ip6" != "ok" ]; then
				auth=`curl --max-time 10 -s -k -H "accept: application/json" -H "Content-Type: application/x-www-form-urlencoded" -X POST -d 'username='$username'&password='$password https://$server:$serverport/token`
			else
				auth=`curl --max-time 10 -s -k -H "accept: application/json" -H "Content-Type: application/x-www-form-urlencoded" -X POST -d 'username='$username'&password='$password https://[$server]:$serverport/token`
			fi
			[ -z "$auth" ] && return
			token="$(echo "$auth" | jsonfilter -q -e '@.access_token')"
			uci -q set openmptcprouter.${servername}.token="$token"
			[ -n "$token" ] && break
		}
		config_load openmptcprouter
		config_list_foreach ${servername} ip login_on_server
	fi
}

_ping_server() {
	server="$1"
	ret=$(ping -c 3 -w 3 -Q 184 $server 2>&1) && echo "$ret" | grep -sq "bytes from" && return
	false
}

_get_json() {
	local route result
	route=$1
	[ -z "$token" ] && _login
	[ -n "$token" ] && {
		resolve="$(resolveip $server)"
		valid_ip6=$(valid_subnet6 $server)
		if [ "$resolve" != "$server" ] || [ "$valid_ip6" != "ok" ]; then
			result=`curl --max-time 10 -s -k -H "accept: application/json" -H "Authorization: Bearer $token" https://$server:$serverport/$route`
		else
			result=`curl --max-time 10 -s -k -H "accept: application/json" -H "Authorization: Bearer $token" https://[$server]:$serverport/$route`
		fi
		echo $result
	} || {
		echo ''
	}
}

_set_json() {
	local route result settings
	route=$1
	settings="$2"
	[ -z "$token" ] && _login
	[ -n "$token" ] && {
		resolve="$(resolveip $server)"
		valid_ip6=$(valid_subnet6 $server)
		if [ "$resolve" != "$server" ] || [ "$valid_ip6" != "ok" ]; then
			result=`curl --max-time 10 -s -k -H "Authorization: Bearer $token" -H "Content-Type: application/json" -X POST -d "$settings" https://$server:$serverport/$route`
		else
			result=`curl --max-time 10 -s -k -H "Authorization: Bearer $token" -H "Content-Type: application/json" -X POST -d "$settings" https://[$server]:$serverport/$route`
		fi
		echo $result
	} || {
		echo ''
	}
}

_set_glorytun_vps() {
	local enabled port key
	enabled="$(uci -q get glorytun.vpn.enable)"
	[ "$enabled" != "1" ] && echo "Glorytun disabled" && return
	port="$(uci -q get glorytun.vpn.port)"
	key="$(uci -q get glorytun.vpn.key)"
	chacha="$(uci -q get glorytun.vpn.chacha20)"
	if [ "$chacha" = "1" ]; then
		chacha="true"
	else
		chacha="false"
	fi
	[ -z "$key" ] && echo "Glorytun key not set" && return
	local current_port current_key current_chacha
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	current_port="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.port')"
	current_key="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.key')"
	current_chacha="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.chacha')"
	if [ "$current_port" != "$port" ] || [ "$current_key" != "$key" ] || [ "$current_chacha" != "$chacha" ]; then
		local settings
		settings='{"port": '$port',"key":"'$key'", "chacha": "'$chacha'"}'
		echo $(_set_json "glorytun" "$settings")
	else
		echo 1
	fi
}

_set_openvpn_vps() {
	local enabled port key
	enabled="$(uci -q get openvpn.omr.enable)"
	[ "$enabled" != "1" ] && echo "OpenVPN disabled" && return
	port="$(uci -q get openvpn.omr.port)"
	cipher="$(uci -q get openvpn.omr.cipher)"
	key="$(base64 /etc/luci-uploads/client.key | tr -d "\n")"
	local current_port current_cipher current_key
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	current_key="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_key')"
	current_port="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.port')"
	current_cipher="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.cipher')"
	if [ "$current_key" != "$key" ]; then
		uci -q set openmptcprouter.${servername}.get_config="1"
	fi
	if [ "$current_port" != "$port" ] || [ "$current_cipher" != "$cipher" ]; then
		local settings
		settings='{"port": '$port', "cipher": "'$cipher'"}'
		echo $(_set_json "openvpn" "$settings")
	else
		echo 1
	fi
}

_set_mlvpn_vps() {
	local enabled port key
	enabled="$(uci -q get mlvpn.general.enable)"
	[ "$enabled" != "1" ] && echo "MLVPN disabled" && return
	timeout="$(uci -q get mlvpn.general.timeout)"
	reorder_buffer_size="$(uci -q get mlvpn.general.reorder_buffer_size)"
	loss_tolerence="$(uci -q get mlvpn.general.loss_tolerence)"
	password="$(uci -q get mlvpn.general.password)"
	cleartext_data="$(uci -q get mlvpn.general.cleartext_data)"
	local current_timeout current_reorder_buffer_size current_loss_tolerence current_password current_cleartext_data
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	current_timeout="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.timeout')"
	current_reorder_buffer_size="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.reorder_buffer_size')"
	current_loss_tolerence="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.loss_tolerence')"
	current_password="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.key')"
	current_cleartext_data="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.cleartext_data')"
	if [ "$current_timeout" != "$timeout" ] || [ "$current_reorder_buffer_size" != "$reorder_buffer_size" ] || [ "$current_loss_tolerence" != "$loss_tolerence" ] || [ "$current_password" != "$password" ] || [ "$current_cleartext_data" != "$cleartext_data" ]; then
		local settings
		settings='{"timeout": '$timeout', "reorder_buffer_size": "'$reorder_buffer_size'", "loss_tolerence": "'$loss_tolerence'", "password": "'$password'", "cleartext_data": "'$cleartext_data'"}'
		echo $(_set_json "mlvpn" "$settings")
	else
		echo 1
	fi
}

_set_wireguard_vps() {
	local enabled port key
	ipskey=""
	_get_wg_ipskey() {
		local interface=$1
		proto=$(uci -q get network.${interface}.proto)
		if [ "$proto" = "wireguard" ]; then
			ip="$(uci -q get network.${interface}.addresses | cut -d/ -f1)"
			key="$(uci -q get network.${interface}.public_key)"
			if [ -z "$ipskey" ]; then
				ipskey='{"ip": "'$ip'", "key": "'$key'"}'
			else
				ipskey=$ipskey',{"ip": "'$ip'", "key": "'$key'"}'
			fi
		fi
	}
	config_load network
	config_foreach _get_wg_ipskey interface
	local settings
	if [ -n "$ipskey" ]; then
		settings='{"peers": ['$ipskey']}'
		echo $(_set_json "wireguard" "$settings")
	else
		echo 1
	fi
}

get_openvpn_key() {
	servername=$2
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	openvpn_client_key="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_key')"
	[ -n "$openvpn_client_key" ] && {
		echo $openvpn_client_key | base64 -d > /etc/luci-uploads/client.key
	}
	openvpn_client_crt="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_crt')"
	[ -n "$openvpn_client_crt" ] && {
		echo $openvpn_client_crt | base64 -d > /etc/luci-uploads/client.crt
	}
	openvpn_client_ca="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_ca')"
	[ -n "$openvpn_client_ca" ] && {
		echo $openvpn_client_ca | base64 -d > /etc/luci-uploads/ca.crt
	}
	[ -n "$openvpn_client_key" ] && [ -n "$openvpn_client_crt" ] && [ -n "$openvpn_client_ca" ] && {
		/etc/init.d/openvpn restart
	}
}

_get_ss_redir() {
	config_get cf_ebpf $1 ebpf
	[ "$cf_ebpf" = "1" ] && ebpf="true"
	config_get cf_fast_open $1 fast_open
	[ "$cf_fast_open" = "1" ] && fast_open="true"
	config_get cf_no_delay $1 no_delay
	[ "$cf_no_delay" = "1" ] && no_delay="true"
	config_get cf_mptcp $1 mptcp
	[ "$cf_mptcp" = "1" ] && mptcp="true"
}

_get_ss_server() {
	config_get cf_obfs $1 obfs
	[ "$cf_obfs" = "1" ] && obfs="true"
	config_get obfs_plugin $1 obfs_plugin "v2ray"
	config_get obfs_type $1 obfs_type "http"
}

_set_ss_server_vps() {
	local disabled port key method
	config_load shadowsocks-libev
	config_get disabled sss0 disabled
	[ "$disabled" = "1" ] && return
	config_get port sss0 server_port
	#config_get server $1 server
	config_get key sss0 key
	key="$(echo $key | sed 's/+/-/g; s/\//_/g;')"
	[ -z "$key" ] && return
	config_get method sss0 method
	local current_port current_key current_method
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	current_port="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.port')"
	current_key="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.key')"
	current_method="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.method')"
	current_ebpf="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.ebpf')"
	current_obfs="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs')"
	current_obfs_plugin="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs_plugin')"
	current_obfs_type="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs_type')"
	current_fast_open="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.fast_open')"
	current_no_delay="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.no_delay')"
	current_mptcp="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.mptcp')"
	
	ebpf="false"
	fast_open="false"
	no_delay="false"
	mptcp="false"
	obfs="false"
	obfs_plugin="v2ray"
	obfs_type="http"
	config_load shadowsocks-libev
	config_foreach _get_ss_redir ss_redir
	config_foreach _get_ss_server server

	if [ "$current_mptcp" != "$mptcp" ] || [ "$current_obfs_plugin" != "$obfs_plugin" ] || [ "$current_obfs_type" != "$obfs_type" ] || [ "$current_port" != "$port" ] || [ "$current_method" != "$method" ] || [ "$current_key" != "$key" ] || [ "$current_ebpf" != "$ebpf" ] || [ "$current_obfs" != "$obfs" ] || [ "$current_fast_open" != "$fast_open" ] || [ "$current_no_delay" != "$no_delay" ]; then
		local settings
		settings='{"port": '$port',"method":"'$method'","fast_open":'$fast_open',"reuse_port":true,"no_delay":'$no_delay',"mptcp":'$mptcp',"key":"'$key'","ebpf":'$ebpf',"obfs":'$obfs',"obfs_plugin":"'$obfs_plugin'","obfs_type":"'$obfs_type'"}'
		result=$(_set_json "shadowsocks" "$settings")
	fi
}

_set_v2ray_server_vps() {
	enabled=$(uci -q get v2ray.main.enabled)
	[ "$enabled" != "1" ] && return
	userid=$(uci -q get v2ray.omrout.s_vless_user_id)
	[ -z "$userid" ] && return
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	current_userid="$(echo "$vps_config" | jsonfilter -q -e '@.v2ray.config.key')"

	if [ "$current_userid" != "$userid" ]; then
		local settings
		settings='{"userid": "'$userid'"}'
		echo $(_set_json "v2ray" "$settings")
	fi
}

_get_vps_config() {
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	vps_lastchange="$(echo "$vps_config" | jsonfilter -q -e '@.vps.lastchange')"
	if [ -n "$(uci -q get openmptcprouter.${servername}.lastchange)" ] && [ -n "$vps_lastchange" ] && [ "$vps_lastchange" -gt "$(uci -q get openmptcprouter.${servername}.lastchange)" ]; then
		_set_config_from_vps
	fi

	piholeomr="$(uci -q get openmptcprouter.${servername}.pihole)"
	pihole="$(echo "$vps_config" | jsonfilter -q -e '@.pihole.state')"
	if [ "$pihole" = "true" ] && [ "$piholeomr" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.pihole='1'
			commit openmptcprouter
		EOF
	elif [ "$pihole" = "false" ] && [ "$piholeomr" != "0" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.pihole='0'
			commit openmptcprouter
		EOF
	fi

	vpsinternet="$(echo "$vps_config" | jsonfilter -q -e '@.network.internet')"
	if [ "$vpsinternet" = "false" ] && [ "$(uci -q get openmptcprouter.settings.external_check)" != "0" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.settings.external_check='0'
			commit openmptcprouter
		EOF
	fi

	vps_kernel="$(echo "$vps_config" | jsonfilter -q -e '@.vps.kernel')"
	vps_machine="$(echo "$vps_config" | jsonfilter -q -e '@.vps.machine')"
	vps_omr_version="$(echo "$vps_config" | jsonfilter -q -e '@.vps.omr_version')"
	uci -q batch <<-EOF >/dev/null
		set openmptcprouter.${servername}.kernel=$vps_kernel
		set openmptcprouter.${servername}.machine=$vps_machine
		set openmptcprouter.${servername}.omr_version=$vps_omr_version
	EOF
	vpn="$(uci -q get openmptcprouter.settings.vpn)"

	glorytun_state=0
	glorytun_change=0
	if [ "$vpn" = "glorytun_tcp" ]; then
		glorytun_state=1
		uci -q set glorytun.vpn.proto='tcp'
		client_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.tcp.client_ip')"
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.tcp.host_ip')"
		port="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.port')"
		if [ "$(uci -q get glorytun.vpn.port)" != "$port" ] && [ "$port" != "" ]; then
			uci -q batch <<-EOF >/dev/null
				set glorytun.vpn.port=$port
			EOF
			glorytun_change=1
		fi
		if [ "$client_ip" != "dhcp" ] && [ -n "$client_ip" ]; then
			if [ "$host_ip" != "$(uci -q get glorytun.vpn.remoteip)" ] || [ "$client_ip" != "$(uci -q get glorytun.vpn.localip)" ]; then
				uci -q batch <<-EOF >/dev/null
					set glorytun.vpn.localip=$client_ip
					set glorytun.vpn.remoteip=$host_ip
				EOF
				glorytun_change=1
			fi
			if [ "$(uci -q get network.omrvpn.proto)" != 'none' ]; then
				uci -q batch <<-EOF >/dev/null
					set network.omrvpn.proto='none'
					commit network
				EOF
				glorytun_change=1
			fi
		else
			if [ "$(uci -q get glorytun.vpn.remoteip)" != "" ] || [ "$(uci -q get glorytun.vpn.localip)" != "" ]; then
				uci -q batch <<-EOF >/dev/null
					delete glorytun.vpn.localip
					delete glorytun.vpn.remoteip
				EOF
				glorytun_change=1
			fi
			if [ "$(uci -q get network.omrvpn.proto)" != 'dhcp' ]; then
				uci -q batch <<-EOF >/dev/null
					set network.omrvpn.proto='dhcp'
					commit network
				EOF
				glorytun_change=1
			fi
		fi
	fi
	if [ "$vpn" = "glorytun_udp" ]; then
		glorytun_state=1
		#uci -q set glorytun.vpn.proto='udp'
		client_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.udp.client_ip')"
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.udp.host_ip')"
		port="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.port')"
		if [ "$(uci -q get glorytun-udp.vpn.port)" != "$port" ] && [ "$port" != "" ]; then
			uci -q batch <<-EOF >/dev/null
				set glorytun-udp.vpn.port=$port
			EOF
		fi
		if [ "$client_ip" != "dhcp" ] && [ -n "$client_ip" ]; then
			if [ "$host_ip" != "$(uci -q get glorytun-udp.vpn.remoteip)" ] || [ "$client_ip" != "$(uci -q get glorytun-udp.vpn.localip)" ]; then
				uci -q batch <<-EOF >/dev/null
					set glorytun-udp.vpn.localip=$client_ip
					set glorytun-udp.vpn.remoteip=$host_ip
				EOF
				glorytun_change=1
			fi
			if [ "$(uci -q get network.omrvpn.proto)" = "dhcp" ]; then
				uci -q batch <<-EOF >/dev/null
					set network.omrvpn.proto='none'
					commit network
				EOF
				glorytun_change=1
			fi
		else
			if [ "$(uci -q get glorytun-udp.vpn.remoteip)" != "" ] || [ "$(uci -q get glorytun-udp.vpn.localip)" != "" ]; then
				uci -q batch <<-EOF >/dev/null
					delete glorytun-udp.vpn.localip
					delete glorytun-udp.vpn.remoteip
				EOF
				glorytun_change=1
			fi
			if [ "$(uci -q get network.omrvpn.proto)" != "dhcp" ]; then
				uci -q batch <<-EOF >/dev/null
					set network.omrvpn.proto='dhcp'
					commit network
				EOF
				glorytun_change=1
			fi
		fi
	fi
	vpsip="$(uci -q get openmptcprouter.${servername}.ip | awk '{print $1}')"
	if [ "$(uci -q get shadowsocks-libev.sss0.server)" != "127.0.0.1" ] && [ "$(uci -q get shadowsocks-libev.sss0.server)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]; then
		config_foreach _set_ss_server server "server" $vpsip
		uci -q batch <<-EOF >/dev/null
			set shadowsocks-libev.sss0.server="$vpsip"
			commit shadowsocks-libev
		EOF
		if [ "$(uci -q get shadowsocks-libev.sss0.disabled)" = "0" ]; then
			logger -t "OMR-VPS" "Restart shadowsocks..."
			/etc/init.d/shadowsocks-libev restart
		fi
	fi
	if [ "$(uci -q get v2ray.omrout.s_vmess_address)" != "127.0.0.1" ] && [ "$(uci -q get v2ray.omrout.s_vmess_address)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set v2ray.omrout.s_vmess_address="$vpsip"
			set v2ray.omrout.s_vless_address="$vpsip"
			commit v2ray
		EOF
		if [ "$(uci -q get v2ray.main.enabled)" = "1" ]; then
			logger -t "OMR-VPS" "Restart V2Ray..."
			/etc/init.d/v2ray restart
		fi
	fi
	if [ "$(uci -q get openvpn.omr.remote)" != "127.0.0.1" ] && [ "$(uci -q get openvpn.omr.remote)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set openvpn.omr.remote="$vpsip"
			commit openvpn
		EOF
		if [ "$(uci -q get openvpn.omr.enabled)" = "1" ]; then
			logger -t "OMR-VPS" "Restart OpenVPN..."
			/etc/init.d/openvpn restart
		fi
	fi
	port="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.port')"
	localip="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.client_ip')"
	remoteip="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.host_ip')"
	if ([ "$(uci -q get dsvpn.vpn.host)" != "127.0.0.1" ] && [ "$(uci -q get dsvpn.vpn.host)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]) || [ "$(uci -q get dsvpn.vpn.port)" != "$port" ] || [ "$(uci -q get dsvpn.vpn.localip)" != "$localip" ] || [ "$(uci -q get dsvpn.vpn.remoteip)" != "$remoteip" ]; then
		uci -q batch <<-EOF >/dev/null
			set dsvpn.vpn.port=$port
			set dsvpn.vpn.localip=$localip
			set dsvpn.vpn.remoteip=$remoteip
			set dsvpn.vpn.host="$vpsip"
			commit dsvpn
		EOF
		if [ "$(uci -q get dsvpn.vpn.enable)" = "1" ]; then
			logger -t "OMR-VPS" "Restart DSVPN..."
			/etc/init.d/dsvpn restart
		fi
	fi

	if [ "$(uci -q get mlvpn.general.host)" != "127.0.0.1" ] && [ "$(uci -q get mlvpn.general.host)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ] && [ -f /etc/init.d/mlvpn ]; then
		uci -q batch <<-EOF >/dev/null
			set mlvpn.general=mlvpn
			set mlvpn.general.host="$vpsip"
			commit mlvpn
		EOF
		if [ "$(uci -q get mlvpn.general.enable)" = "1" ]; then
			logger -t "OMR-VPS" "Restart MLVPN..."
			/etc/init.d/mlvpn restart
		fi
	fi
	if [ "$(uci -q get glorytun.vpn.host)" != "127.0.0.1" ] && [ "$(uci -q get glorytun.vpn.host)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set glorytun.vpn.host="$vpsip"
		EOF
		glorytun_change=1
	fi
	if [ "$(uci -q get glorytun-udp.vpn.host)" != "127.0.0.1" ] && [ "$(uci -q get glorytun-udp.vpn.host)" != "$vpsip" ] && [ "$(uci -q get openmptcprouter.settings.ha)" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set glorytun-udp.vpn.host="$vpsip"
		EOF
		glorytun_change=1
	fi

	if [ "$glorytun_change" != "0" ]; then
		uci -q batch <<-EOF >/dev/null
			commit glorytun
			commit glorytun-udp
		EOF
		if [ "$(uci -q get glorytun.vpn.enable)" = "1" ]; then
			logger -t "OMR-VPS" "Restart glorytun..."
			/etc/init.d/glorytun restart >/dev/null 2>&1
		fi
		if [ "$(uci -q get glorytun-udp.vpn.enable)" = "1" ]; then
			logger -t "OMR-VPS" "Restart glorytun-udp..."
			/etc/init.d/glorytun-udp restart >/dev/null 2>&1
		fi
	fi
}

_get_gre_tunnel() {
	[ -z "$servername" ] && servername=$1
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	gre_tunnel_state="$(echo "$vps_config" | jsonfilter -q -e '@.gre_tunnel.enabled')"
	vpnip_local="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.remoteip')"
	vpnip_remote="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.localip')"
	if [ "$gre_tunnel_state" = "true" ]; then
		i=0
		echo "$vps_config" | jsonfilter -q -e '@.gre_tunnel.config[*]' |
		while IFS= read -r tunnel; do
			peeraddr="$(echo $tunnel | jsonfilter -q -e '@.remote_ip')"
			ipaddr="$(echo $tunnel | jsonfilter -q -e '@.local_ip')"
			publicaddr="$(echo $tunnel | jsonfilter -q -e '@.public_ip')"
			if [ "$peeraddr" != "" ] && [ "$ipaddr" != "" ] && [ "$publicaddr" != "" ] && [ "$vpnip_local" != "" ] && ([ "$(uci -q get network.oip${i}.ipaddr)" != "$peeraddr" ] || [ "$(uci -q get network.oip${i}.gateway)" != "$ipaddr" ] || [ "$(uci -q get network.oip${i}gre.ipaddr)" != "$vpnip_local" ]); then
				uci -q batch <<-EOF >/dev/null
					set network.oip${i}gre=interface
					set network.oip${i}gre.label="GRE tunnel for $publicaddr"
					set network.oip${i}gre.proto=gre
					set network.oip${i}gre.nohostroute='1'
					set network.oip${i}gre.ipv6='0'
					set network.oip${i}gre.defaultroute='0'
					set network.oip${i}gre.multipath='off'
					set network.oip${i}gre.peerdns='0'
					set network.oip${i}gre.ttl='255'
					set network.oip${i}gre.ip4table='vpn'
					set network.oip${i}gre.peeraddr="$publicaddr"
					set network.oip${i}gre.ipaddr="$vpnip_local"
					set network.oip${i}gre.tunlink='omrvpn'
					set network.oip${i}=interface
					set network.oip${i}.label="Tunnel for $publicaddr"
					set network.oip${i}.proto=static
					set network.oip${i}.nohostroute='1'
					set network.oip${i}.device="@oip${i}gre"
					set network.oip${i}.ipv6='0'
					set network.oip${i}.defaultroute='0'
					set network.oip${i}.multipath='off'
					set network.oip${i}.peerdns='0'
					set network.oip${i}.ip4table='vpn'
					set network.oip${i}.gateway="$ipaddr"
					set network.oip${i}.ipaddr="$peeraddr"
					set network.oip${i}.netmask="255.255.255.252"
					set network.oip${i}.lookup="667${i}"
				EOF
				allintf=$(uci -q get firewall.zone_vpn.network)
				uci -q del firewall.zone_vpn.network
				for intf in $allintf; do
					uci -q add_list firewall.zone_vpn.network=$intf
				done
				[ -z "$(uci -q get firewall.zone_vpn.network | grep oip${i}gre)" ] && {
					uci -q add_list firewall.zone_vpn.network="oip${i}gre"
					uci -q add_list firewall.zone_vpn.network="oip${i}"
				}
				ssport="$(echo $tunnel | jsonfilter -q -e '@.shadowsocks_port')"
				uci -q batch <<-EOF >/dev/null
					set shadowsocks-libev.oip${i}server=server
					set shadowsocks-libev.oip${i}server.label="Server with public IP $publicaddr"
					set shadowsocks-libev.oip${i}server.server_port="$ssport"
					set shadowsocks-libev.oip${i}server.server="$(uci -q get shadowsocks-libev.sss0.server)"
					set shadowsocks-libev.oip${i}server.method="$(uci -q get shadowsocks-libev.sss0.method)"
					set shadowsocks-libev.oip${i}server.key="$(uci -q get shadowsocks-libev.sss0.key)"
					set shadowsocks-libev.oip${i}=ss_redir
					set shadowsocks-libev.oip${i}.label="ss-redir for public IP $publicaddr"
					set shadowsocks-libev.oip${i}.server="oip${i}server"
					set shadowsocks-libev.oip${i}.local_port="230$i"
					set shadowsocks-libev.oip${i}.local_address="$(uci -q get shadowsocks-libev.hi.local_address)"
					set shadowsocks-libev.oip${i}.mode='tcp_and_udp'
					set shadowsocks-libev.oip${i}.reuse_port='1'
					set shadowsocks-libev.oip${i}.mptcp='1'
					set shadowsocks-libev.oip${i}.ipv6_first='1'
					set shadowsocks-libev.oip${i}.timeout="$(uci -q get shadowsocks-libev.hi.timeout)"
					set shadowsocks-libev.oip${i}.fast_open="$(uci -q get shadowsocks-libev.hi.fast_open)"
					set shadowsocks-libev.oip${i}.no_delay="$(uci -q get shadowsocks-libev.hi.no_delay)"
					set shadowsocks-libev.oip${i}_rule=ss_rules
					set shadowsocks-libev.oip${i}_rule.label="Rules for public IP $publicaddr"
					set shadowsocks-libev.oip${i}_rule.server="oip${i}server"
					set shadowsocks-libev.oip${i}_rule.disabled='1'
					set shadowsocks-libev.oip${i}_rule.src_default='bypass'
					set shadowsocks-libev.oip${i}_rule.dst_default='bypass'
					set shadowsocks-libev.oip${i}_rule.local_default='bypass'
					set shadowsocks-libev.oip${i}_rule.redir_tcp="oip${i}"
				EOF
				if [ "$(uci -q get shadowsocks-libev.oip${i}server.disabled)" = "" ]; then
					uci -q set shadowsocks-libev.oip${i}server.disabled="1"
				fi
			fi
			i=$((i+1))
		done
		uci -q batch <<-EOF >/dev/null
			commit network
			commit firewall
			commit shadowsocks-libev
		EOF
	fi
}

set_gre_tunnel() {
	config_load openmptcprouter
	config_foreach _get_gre_tunnel server
}


_get_pihole() {
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	vpn="$(uci -q get openmptcprouter.settings.vpn)"
	piholeomr="$(uci -q get openmptcprouter.${servername}.pihole)"
	pihole="$(echo "$vps_config" | jsonfilter -q -e '@.pihole.state')"
	if [ "$pihole" = "true" ] && [ "$piholeomr" != "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.pihole='1'
			commit openmptcprouter
		EOF
	elif [ "$pihole" = "false" ] && [ "$piholeomr" != "0" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.pihole='0'
			commit openmptcprouter
		EOF
	fi

	if [ "$vpn" = "glorytun_tcp" ]; then
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.tcp.host_ip')"
		if [ "$pihole" = "true" ] && [ -z "$(uci -q get dhcp.@dnsmasq[0].server | grep $host_ip)" ]; then
			uci -q del_list dhcp.@dnsmasq[0].server="$(uci -q get dhcp.@dnsmasq[0].server | tr ' ' '\n' | grep '#53' | grep '10.2')"
			uci -q batch <<-EOF >/dev/null
				del_list dhcp.@dnsmasq[0].server="127.0.0.1#5353"
				add_list dhcp.@dnsmasq[0].server="$host_ip#53"
				set dhcp.@dnsmasq[0].rebind_protection='0'
				commit dhcp
			EOF
			logger -t "OMR-VPS" "Restart dnsmasq..."
			/etc/init.d/dnsmasq restart >/dev/null 2>&1
		fi
	fi
	if [ "$vpn" = "glorytun_udp" ]; then
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.udp.host_ip')"
		if [ "$pihole" = "true" ] && [ -z "$(uci -q get dhcp.@dnsmasq[0].server | grep $host_ip)" ]; then
			uci -q del_list dhcp.@dnsmasq[0].server="$(uci -q get dhcp.@dnsmasq[0].server | tr ' ' '\n' | grep '#53' | grep '10.2')"
			uci -q batch <<-EOF >/dev/null
				del_list dhcp.@dnsmasq[0].server="127.0.0.1#5353"
				add_list dhcp.@dnsmasq[0].server="$host_ip#53"
				set dhcp.@dnsmasq[0].rebind_protection='0'
				commit dhcp
			EOF
			logger -t "OMR-VPS" "Restart dnsmasq..."
			/etc/init.d/dnsmasq restart >/dev/null 2>&1
		fi
	fi
	if [ "$vpn" = "openvpn" ]; then
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.host_ip')"
		if [ "$pihole" = "true" ] && [ -z "$(uci -q get dhcp.@dnsmasq[0].server | grep $host_ip)" ]; then
			uci -q del_list dhcp.@dnsmasq[0].server="$(uci -q get dhcp.@dnsmasq[0].server | tr ' ' '\n' | grep '#53' | grep '10.2')"
			uci -q batch <<-EOF >/dev/null
				del_list dhcp.@dnsmasq[0].server="127.0.0.1#5353"
				add_list dhcp.@dnsmasq[0].server="$host_ip#53"
				set dhcp.@dnsmasq[0].rebind_protection='0'
				commit dhcp
			EOF
			logger -t "OMR-VPS" "Restart dnsmasq..."
			/etc/init.d/dnsmasq restart >/dev/null 2>&1
		fi
	fi
	if [ "$vpn" = "mlvpn" ]; then
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.host_ip')"
		if [ "$pihole" = "true" ] && [ -z "$(uci -q get dhcp.@dnsmasq[0].server | grep $host_ip)" ]; then
			uci -q del_list dhcp.@dnsmasq[0].server="$(uci -q get dhcp.@dnsmasq[0].server | tr ' ' '\n' | grep '#53' | grep '10.2')"
			uci -q batch <<-EOF >/dev/null
				del_list dhcp.@dnsmasq[0].server="127.0.0.1#5353"
				add_list dhcp.@dnsmasq[0].server="$host_ip#53"
				set dhcp.@dnsmasq[0].rebind_protection='0'
				commit dhcp
			EOF
			logger -t "OMR-VPS" "Restart dnsmasq..."
			/etc/init.d/dnsmasq restart >/dev/null 2>&1
		fi
	fi
	if [ "$vpn" = "dsvpn" ]; then
		host_ip="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.host_ip')"
		if [ "$pihole" = "true" ] && [ -z "$(uci -q get dhcp.@dnsmasq[0].server | grep $host_ip)" ]; then
			uci -q del_list dhcp.@dnsmasq[0].server="$(uci -q get dhcp.@dnsmasq[0].server | tr ' ' '\n' | grep '#53' | grep '10.2')"
			uci -q batch <<-EOF >/dev/null
				del_list dhcp.@dnsmasq[0].server="127.0.0.1#5353"
				add_list dhcp.@dnsmasq[0].server="$host_ip#53"
				set dhcp.@dnsmasq[0].rebind_protection='0'
				commit dhcp
			EOF
			logger -t "OMR-VPS" "Restart dnsmasq..."
			/etc/init.d/dnsmasq restart >/dev/null 2>&1
		fi
	fi
}

_set_redirect_ports_from_vps() {
	redirect_ports=$1
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	redirect_ports_current="$(echo "$vps_config" | jsonfilter -q -e '@.shorewall.redirect_ports')"
	[ "$redirect_ports" = "1" ] && redirect_ports_request="enable"
	[ "$redirect_ports" = "0" ] && redirect_ports_request="disable"
	if [ "$redirect_ports_request" != "$redirect_ports_current" ]; then
		settings='{"redirect_ports": "'$redirect_ports_request'"}'
		echo $(_set_json "shorewall" "$settings")
	else
		echo 1
	fi

}

_set_mptcp_vps() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	mptcp_enabled_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.enabled')"
	checksum_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.checksum')"
	path_manager_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.path_manager')"
	scheduler_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.scheduler')"
	syn_retries_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.syn_retries')"
	congestion_control_current="$(echo "$vps_config" | jsonfilter -q -e '@.network.congestion_control')"
	mptcp_version_current="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.version')"
	mptcp_enabled="$(uci -q get network.globals.multipath)"
	if [ "$mptcp_enabled" = "disable" ]; then
		mptcp_enabled="0"
	else
		mptcp_enabled="1"
	fi
	checksum="$(uci -q get network.globals.mptcp_checksum)"
	path_manager="$(uci -q get network.globals.mptcp_path_manager)"
	scheduler="$(uci -q get network.globals.mptcp_scheduler)"
	syn_retries="$(uci -q get network.globals.mptcp_syn_retries)"
	congestion="$(uci -q get network.globals.congestion)"
	mptcp_version="$(uci -q get network.globals.mptcp_version)"
	[ -z "$mptcp_version" ] && mptcp_version="0"
	[ ! -f /proc/sys/net/mptcp/mptcp_enabled ] && mptcp_version="1"
	[ -z "$congestion" ] && congestion="bbr"
	if [ "$mptcp_enabled_current" != "$mptcp_enabled" ] || [ "$checksum_current" != "$checksum" ] || ([ "$path_manager_current" != "" ] && [ "$path_manager_current" != "$path_manager" ]) || ([ "$scheduler_current" != "" ] && [ "$scheduler_current" != "$scheduler" ]) || ([ "$syn_retries_current" != "" ] && [ "$syn_retries_current" != "$syn_retries" ]) || [ "$congestion_control_current" != "$congestion" ] || [ "$mptcp_version_current" != "$mptcp_version" ]; then
		settings='{"enabled" : "'$mptcp_enabled'", "checksum": "'$checksum'","path_manager": "'$path_manager'","scheduler": "'$scheduler'","syn_retries": "'$syn_retries'","congestion_control": "'$congestion'","version": "'$mptcp_version'"}'
		echo $(_set_json "mptcp" "$settings")
	else
		echo 1
	fi
}

_set_vpn_vps() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	vpn_current="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.current')"
	vpn="$(uci -q get openmptcprouter.settings.vpn)"
	if [ "$vpn_current" != "$vpn" ]; then
		settings='{"vpn" : "'$vpn'"}'
		echo $(_set_json "vpn" "$settings")
	else
		echo 1
	fi
}

_set_proxy_vps() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	proxy_current="$(echo "$vps_config" | jsonfilter -q -e '@.proxy.current')"
	proxy="$(uci -q get openmptcprouter.settings.proxy)"
	if [ "$proxy_current" != "$proxy" ]; then
		settings='{"proxy" : "'$proxy'"}'
		echo $(_set_json "proxy" "$settings")
	else
		echo 1
	fi
}

_get_local_wan_ip() {
	wanip="$(uci -q get openmptcprouter.$1.publicip)"
	[ -n "$wanip" ] && {
		[ -z "$wanips" ] && wanips=$wanip || wanips="$wanips"'\n'"$wanip"
	}
}

_set_wan_ip() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	wanip_current="$(echo "$vps_config" | jsonfilter -q -e '@.wan.ips')"
	if [ -n "$wanips" ] && [ "$wanip_current" != "$wanips" ]; then
		settings='{"ips" : "'$wanips'"}'
		result=$(_set_json "wan" "$settings")
		#echo $(_set_json "wan" "$settings")
	#else
	#	echo 1
	fi
}

_get_lan_ip() {
	local intf=$1
	if [ "$(uci -q get firewall.zone_lan.network | grep $intf)" != "" ]; then
		lanip="$(uci -q get network.${intf}.ipaddr)/$(uci -q get network.${intf}.netmask)"
		if [ "$lanip" != "/" ]; then
			if [ -z "$lanips" ]; then
				lanips='"'${lanip}'"'
			else
				lanips='"'$lanips'" "'${lanip}'"'
			fi
		fi
	fi
}

_set_lan_ip() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	#lanip_current="$(echo "$vps_config" | jsonfilter -q -e '@.lan.ips')"
	#if [ "$lanips" != "" ] && [ "$lanip_current" != "$lanips" ]; then
	if [ "$lanips" != "" ]; then
		settings='{"lanips" : ['$lanips']}'
		result=$(_set_json "lan" "$settings")
	fi
}

_set_vpn_ip() {
	local settings
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	vpnifname="$(uci -q get network.omrvpn.device)"
	vpnip_local_current="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.remoteip')"
	vpnip_local=$(ip -4 -br addr ls dev ${vpnifname} | awk -F'[ /]+' '{print $3}')
	vpnip_remote_current="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.localip')"
	vpnip_remote=$(ip -4 r list dev ${vpnifname} | grep via | grep -v default | grep -v / | grep -v metric | awk '{print $1}' | tr -d "\n")
	[ -z "$vpnip_remote" ] && [ -n "$vpnifname" ] && vpnip_remote=$(ip -4 r list dev ${vpnifname} | grep kernel | awk '{print $1}' | tr -d "\n")
	[ -z "$vpnip_remote" ] && [ -n "$vpnifname" ] && vpnip_remote=$(ip -4 r list dev ${vpnifname} | grep "proto static src" | awk '{print $3}' | tr -d "\n")
	[ -z "$vpnip_remote" ] && vpnip_remote=$(ifstatus omrvpn | jsonfilter -e '@.route[0].nexthop')
	[ -z "$vpnip_remote" ] && [ "$vpnifname" = "bonding-omrvpn" ] && vpnip_remote="10.255.248.1"
	ula="$(uci -q get network.globals.ula_prefix)"
	ula_current="$(echo "$vps_config" | jsonfilter -q -e '@.ip6in4.ula')"
	if [ "$vpnip_remote" != "" ] && [ "$vpnip_local" != "" ] && ([ "$vpnip_remote" != "$vpnip_remote_current" ] || [ "$vpnip_local" != "$vpnip_local_current" ] || [ "$ula" != "$ula_current" ]); then
		settings='{"remoteip" : "'$vpnip_local'","localip" : "'$vpnip_remote'","ula" : "'$ula'"}'
		result=$(_set_json "vpnips" "$settings")
	fi
}

_set_sipalg() {
	local settings
	sipalg="$(uci -q get openmptcprouter.settings.sipalg)"
	if [ "$sipalg" = "1" ]; then
		sipalg="true"
	else
		sipalg="false"
	fi
	settings='{"enable" : "'$sipalg'"}'
	result=$(_set_json "sipalg" "$settings")
}


_delete_client2client() {
	if [ -n "$(echo $1 | grep omr_client2client)" ]; then
		uci -q delete network.$1
	fi
}

_set_client2client() {
	local c2cid=0
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	c2cips="$(echo "$vps_config" | jsonfilter -q -e '@.client2client.lanips[0]')"
	vpnifname="$(uci -q get network.omrvpn.device)"
	vpnip_local=$(ip -4 -br addr ls dev ${vpnifname} | awk -F'[ /]+' '{print $3}' | tr -d "\n")
	vpnip_remote=$(ip -4 r list dev ${vpnifname} | grep via | grep -v default | grep -v / | grep -v metric | awk '{print $1}' | tr -d "\n")
	for lanip in $c2cips; do
		c2cid=$((c2cid+1))
		targetip=$(echo $lanip | awk -F '/' '{print $1}' | tr -d "\n")
		netmask=$(echo $lanip | awk -F '/' '{print $2}' | tr -d "\n")
		target=$(ipcalc.sh $targetip $netmask | grep NETWORK | awk -F '=' '{print $2}' | tr -d "\n")
		uci -q batch <<-EOF >/dev/null
			set network.omr_client2client_${c2cid}=route
			set network.omr_client2client_${c2cid}.interface=omrvpn
			set network.omr_client2client_${c2cid}.target="${target}"
			set network.omr_client2client_${c2cid}.netmask="${netmask}"
			set network.omr_client2client_${c2cid}.gateway="${vpnip_remote}"
		EOF
	done
	uci -q commit network
}

_vps_firewall_redirect_port() {
	local src proto src_dport section
	section=$1
	config_get src $1 src
	config_get proto $1 proto "tcp udp"
	config_get src_dport $1 src_dport
	config_get family $1 family "ipv4"
	config_get enabled $1 enabled "1"
	config_get src_dip $1 src_dip
	config_get dest_ip $1 dest_ip
	config_get dest_port $1 dest_port
	config_get src_ip $1 src_ip
	config_get v2ray $1 v2ray "0"
	config_get name $1 name
	config_get dmz $1 dmz "0"
	config_get target $1 target "REDIRECT"
	if [ -z "$src_dport" ] && [ -n "$dest_port" ]; then
		src_dport=$dest_port
	fi
	if [ "$dmz" = "1" ] && [ "$src_dport" != "2-64999" ]; then
		uci -q batch <<-EOF >/dev/null
			set firewall.${section}.src_dport='2-64999'
			commit firewall
		EOF
		src_dport='2-64999'
	fi
	[ -n "$src_dport" ] && src_dport=$(echo $src_dport | sed 's/:/-/')
	if [ -n "$src_dport" ] && [ "$(echo $src_dport | cut -d'-' -f2)" -ge "65000" ]; then
		logger -t "OMR-VPS" "You can't redirect ports >= 65000, they are needed by OpenMPTCProuter Server part"
		enabled="0"
		#uci -q delete firewall.$1
		#return
	fi
	[ "$(uci -q get v2ray.main.enabled)" = "0" ] && v2ray="0"
	[ "$proto" = "all" ] && proto="tcp udp"
	[ "$proto" = "" ] && proto="tcp udp"
	[ "$src" = "vpn" ] && [ -n "$proto" ] && [ -n "$src_dport" ] && [ "$enabled" != "0" ] && [ "$name" != "Allow-DHCP-Request-VPN" ] && {
		for protoi in $proto; do
			if [ "$v2ray" = "0" ]; then
				checkfw=""
				if [ "$family" = "ipv4" ]; then
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						checkfw=$(echo "$vpsfwlist" | grep "$src_dport	# OMR $username redirect router $src_dport port $protoi")
					else
						comment=""
						[ -n "$src_dip" ] && {
							comment=" to $src_dip"
							$IPTABLESSAVE --counters | sed "s:-d $src_dip/32::g" | $IPTABLESRESTORE -w
							[ -f /usr/sbin/nft ] && {
								rule=$(nft -a list table inet fw4 | grep -m1 "ip daddr $src_dip")
								[ -n "$rule" ] && {
									handle=$(echo $rule | awk '{ print $NF }')
									nft replace rule inet fw4 dstnat_lan handle ${handle} $(echo $rule | awk '{ sub(" comment.*$",""); print }' | sed "s/ip daddr ${src_dip}//") 2>&1 >/dev/null
								}
								rule=$(nft -a list table inet fw4 | grep -m1 "ip daddr $src_dip")
								[ -n "$rule" ] && {
									handle=$(echo $rule | awk '{ print $NF }')
									nft replace rule inet fw4 dstnat_vpn handle $handle $(echo $rule | awk '{ sub(" comment.*$",""); print }' | sed "s/ip daddr ${src_dip}/meta nfproto ipv4/") 2>&1 >/dev/null
								}
							}
						}
						[ -n "$src_ip" ] && comment=" from $src_ip"
						if [ "$target" = "ACCEPT" ]; then
							checkfw=$(echo "$vpsfwlist" | grep "# OMR $username open router $src_dport port ${protoi}${comment}")
						else
							checkfw=$(echo "$vpsfwlist" | grep "# OMR $username redirect router $src_dport port ${protoi}${comment}")
						fi
					fi
				else
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						if [ "$target" = "ACCEPT" ]; then
							checkfw=$(echo "$vpsfw6list" | grep "$src_dport	# OMR $username open router $src_dport port $protoi")
						else
							checkfw=$(echo "$vpsfw6list" | grep "$src_dport	# OMR $username redirect router $src_dport port $protoi")
						fi
					else
						comment=""
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						if [ "$target" = "ACCEPT" ]; then
							checkfw=$(echo "$vpsfw6list" | grep "# OMR $username open router $src_dport port ${protoi}${comment}")
						else
							checkfw=$(echo "$vpsfw6list" | grep "# OMR $username redirect router $src_dport port ${protoi}${comment}")
						fi
					fi
				fi
				if [ "$checkfw" = "" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","source_dip" : "'$src_dip'","source_ip" : "'$src_ip'","proto" : "'$protoi'","fwtype" : "'$target'","ipproto" : "'$family'"}'
					result=$(_set_json "shorewallopen" "$settings")
				fi
				if [ "$family" = "ipv4" ]; then
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						if [ "$target" = "ACCEPT" ]; then
							vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR $username open router $src_dport port $protoi$")
							[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR open router $src_dport port $protoi$")
						else
							vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR $username redirect router $src_dport port $protoi$")
							[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR redirect router $src_dport port $protoi$")
						fi
					else
						comment=""
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						if [ "$target" = "ACCEPT" ]; then
							vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR $username open router $src_dport port ${protoi}${comment}$")
							[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR open router $src_dport port ${protoi}${comment}$")
						else
							vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR $username redirect router $src_dport port ${protoi}${comment}")
							[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR redirect router $src_dport port ${protoi}${comment}$")
						fi
					fi
				else
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						if [ "$target" = "ACCEPT" ]; then
							vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR $username open router $src_dport port $protoi$")
							[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR open router $src_dport port $protoi$")
						else
							vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR $username redirect router $src_dport port $protoi$")
							[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR redirect router $src_dport port $protoi$")
						fi
					else
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						if [ "$target" = "ACCEPT" ]; then
							vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR $username open router $src_dport port ${protoi}${comment}$")
							[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR open router $src_dport port ${protoi}${comment}$")
						else
							vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR $username redirect router $src_dport port ${protoi}${comment}$")
							[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR redirect router $src_dport port ${protoi}${comment}$")
						fi
					fi
				fi
			else
				checkfw=""
				if [ "$family" = "ipv4" ]; then
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						checkfw=$(echo "$vpsfwlist" | grep "$src_dport	# OMR $username open router $src_dport port $protoi --- V2Ray to ${dest_ip}:${dest_port}")
					else
						comment=""
						[ -n "$src_dip" ] && {
							comment=" to $src_dip"
							$IPTABLESSAVE --counters | sed "s:-d $src_dip/32::g" | $IPTABLESRESTORE -w
							[ -f /usr/sbin/nft ] && {
								rule=$(nft -a list table inet fw4 | grep -m1 "ip daddr $src_dip")
								[ -n "$rule" ] && {
									handle=$(echo $rule | awk '{ print $NF }')
									nft replace rule inet fw4 dstnat_lan handle ${handle} $(echo $rule | awk '{ sub(" comment.*$",""); print }' | sed "s/ip daddr ${src_dip}//") 2>&1 >/dev/null
								}
								rule=$(nft -a list table inet fw4 | grep -m1 "ip daddr $src_dip")
								[ -n "$rule" ] && {
									handle=$(echo $rule | awk '{ print $NF }')
									nft replace rule inet fw4 dstnat_vpn handle $handle $(echo $rule | awk '{ sub(" comment.*$",""); print }' | sed "s/ip daddr ${src_dip}/meta nfproto ipv4/") 2>&1 >/dev/null
								}
							}
						}
						[ -n "$src_ip" ] && comment=" from $src_ip"
						checkfw=$(echo "$vpsfwlist" | grep "# OMR $username open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}")
					fi
				else
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						checkfw=$(echo "$vpsfw6list" | grep "$src_dport	# OMR $username open router $src_dport port ${protoi} --- V2Ray to ${dest_ip}:${dest_port}")
					else
						comment=""
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						checkfw=$(echo "$vpsfw6list" | grep "# OMR $username open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}")
					fi
				fi
				if [ "$checkfw" = "" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","source_dip" : "'$src_dip'","source_ip" : "'$src_ip'","proto" : "'${protoi}'","fwtype" : "ACCEPT","ipproto" : "'$family'","comment" : "V2Ray to '${dest_ip}':'${dest_port}'"}'
					result=$(_set_json "shorewallopen" "$settings")
					[ -z "$dest_port" ] && dest_port="$src_dport"
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","destip" : "'$dest_ip'","destport" : "'$dest_port'","proto" : "'${protoi}'"}'
					result=$(_set_json "v2rayredirect" "$settings")
				fi
				if [ "$family" = "ipv4" ]; then
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR $username open router $src_dport port ${protoi} --- V2Ray to ${dest_ip}:${dest_port}$")
						[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "$src_dport	# OMR open router $src_dport port ${protoi} --- V2Ray to ${dest_ip}:${dest_port}$")
					else
						comment=""
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR $username open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}$")
						[ "$username" = "openmptcprouter" ] && vpsfwlist=$(echo "$vpsfwlist" | grep -v "# OMR open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}$")
					fi
				else
					if [ "$src_dip" = "" ] && [ "$src_ip" = "" ]; then
						vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR $username open router $src_dport port ${protoi} --- V2Ray to ${dest_ip}:${dest_port}$")
						[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "$src_dport	# OMR open router $src_dport port ${protoi} --- V2Ray to ${dest_ip}:${dest_port}$")
					else
						[ -n "$src_dip" ] && comment=" to $src_dip"
						[ -n "$src_ip" ] && comment=" from $src_ip"
						vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR $username open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}$")
						[ "$username" = "openmptcprouter" ] && vpsfw6list=$(echo "$vpsfw6list" | grep -v "# OMR open router $src_dport port ${protoi}${comment} --- V2Ray to ${dest_ip}:${dest_port}$")
					fi
				fi
			fi
		done
	}
}

_vps_firewall_close_port() {
	[ -n "$vpsfwlist" ] && {
		echo "$vpsfwlist" | while read -r line; do
			[ -n "$line" ] && {
				type=$(echo $line | awk '{print $1}' | tr -d "\n")
				proto=$(echo $line | awk '{print $4}' | tr -d "\n")
				src_dport=$(echo $line | awk '{print $5}' | tr -d "\n")
				source_port=$(echo $line | awk '{print $6}' | tr -d "\n")
				source_dip=$(echo $line | awk '{print $7}' | tr -d "\n")
				comment=$(echo $line | awk -F' --- ' '{print $2}' | tr -d "\n")
				[ "$source_dip" = "#" ] && source_dip=""
				source_ip=$(echo $line | awk '{print $2}' | awk -F ":" '{print $2}' | tr -d "\n")
				if [ "$source_port" = "-" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","source_dip": "'$source_dip'","source_ip": "'$source_ip'","comment" : "'$comment'"}'
				elif [ "$source_ip" != "" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","source_ip": "'$source_ip'","comment" : "'$comment'"}'
				else
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","comment" : "'$comment'"}'
				fi
				result=$(_set_json "shorewallclose" "$settings")
				[ "$type" = "ACCEPT" ] && {
					destip=$(echo $comment | awk '{print $3}' | awk -F: '{print $1}')
					destport=$(echo $comment | awk '{print $3}' | awk -F: '{print $2}')
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","destip" : "'$destip'","destport": "'$destport'"}'
					result=$(_set_json "v2rayunredirect" "$settings")
				}
			}
		done
	}
	[ -n "$vpsfw6list" ] && {
		echo "$vpsfw6list" | while read -r line; do
			[ -n "$line" ] && {
				type=$(echo $line | awk '{print $1}' | tr -d "\n")
				proto=$(echo $line | awk '{print $4}' | tr -d "\n")
				src_dport=$(echo $line | awk '{print $5}' | tr -d "\n")
				source_port=$(echo $line | awk '{print $6}' | tr -d "\n")
				source_dip=$(echo $line | awk '{print $7}' | tr -d "\n")
				comment=$(echo $line | awk -F' --- ' '{print $2}' | tr -d "\n")
				[ "$source_dip" = "#" ] && source_dip=""
				source_ip=$(echo $line | awk '{print $2}' | awk -F ":" '{print $2}' | tr -d "\n")
				if [ "$source_port" = "-" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","ipproto" : "ipv6","source_dip": "'$source_dip'","source_ip": "'$source_ip'","comment" : "'$comment'"}'
				elif [ "$source_ip" != "" ]; then
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","ipproto" : "ipv6","source_dip": "'$source_dip'","source_ip": "'$source_ip'","comment" : "'$comment'"}'
				else
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","fwtype" : "DNAT","ipproto" : "ipv6","comment" : "'$comment'"}'
				fi
				result=$(_set_json "shorewallclose" "$settings")
				[ "$type" = "ACCEPT" ] && {
					settings='{"name" : "router '$src_dport'","port" : "'$src_dport'","proto" : "'$proto'","comment" : "'$comment'"}'
					result=$(_set_json "v2rayunredirect" "$settings")
				}
			}
		done
	}
}

_set_vps_firewall() {
	fw3 -q print | grep 'vpn.* -d' |
	while IFS=$"\n" read -r c; do
		eval $(echo $c | sed 's/iptables/iptables -w/' | sed 's/-A/-D/') 2>&1 >/dev/null
		publicip=$(echo $c | awk -F'-d' '{print $2}' | cut -d '/' -f1 | sed 's/ //g')
		[ -n "$publicip" ] && {
			greintf=$(uci show network | grep "Tunnel for $publicip" | cut -d '.' -f2 | tr -d "\n")
			[ -n "$greintf" ] && greip=$(uci -q get network.${greintf}.ipaddr)
		}
		if [ -z "$greip" ]; then
			newrule=$(echo $c | sed 's/iptables/iptables -w/' | sed -E -e 's/ -d ([^ ])*//' -e 's/ -s ([^ ])*//')
		else
			newrule=$(echo $c | sed 's/iptables/iptables -w/' | sed -E -e "s/ -d ([^ ])*/ -d ${greip}\/255.255.255.252/" -e 's/ -s ([^ ])*//')
		fi
		eval $(echo $newrule | sed 's/-A/-D/') || true
		eval $newrule
	done
	#'

	fwservername=$1
	[ -n "$fwservername" ] && servername=$fwservername
	[ -z "$fwservername" ] && fwservername=$servername
	[ "$(uci -q get openmptcprouter.${fwservername}.nofwredirect)" = "1" ] && return
	[ -z "$(uci -q get openmptcprouter.${fwservername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${fwservername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${fwservername}.port)" ] && return
	token=""
	vps_config=""
	_login
	[ -z "$token" ] && {
		logger -t "OMR-VPS" "Can't get ${fwservername} token, try later"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${fwservername}.admin_error=1
		EOF
		return
	}
	username="$(uci -q get openmptcprouter.${fwservername}.username)"
	settings='{"name" : "redirect router"}'
	fw_list=$(_set_json "shorewalllist" "$settings")
	[ -z "$fw_list" ] && return
	vpsfwlist=$(echo $fw_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')
	settings='{"name" : "open router"}'
	fw_list=$(_set_json "shorewalllist" "$settings")
	[ -z "$fw_list" ] && return
	if [ -n "$vpsfwlist" ]; then
		vpsfwlist="${vpsfwlist}"$'\n'"$(echo $fw_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')"
	else
		vpsfwlist="$(echo $fw_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')"
	fi
	settings='{"name" : "redirect router","ipproto" : "ipv6"}'
	fw6_list=$(_set_json "shorewalllist" "$settings")
	[ -z "$fw6_list" ] && return
	vpsfw6list=$(echo $fw6_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')
	settings='{"name" : "open router","ipproto" : "ipv6"}'
	fw6_list=$(_set_json "shorewalllist" "$settings")
	[ -z "$fw6_list" ] && return
	if [ -n "$vpsfw6list" ]; then
		vpsfw6list="$vpsfw6list\n$(echo $fw6_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')"
	else
		vpsfw6list="$(echo $fw6_list | jsonfilter -q -e '@.list[*]' | sed '/^[[:space:]]*$/d')"
	fi
	config_load firewall
	config_foreach _vps_firewall_redirect_port redirect
	config_foreach _vps_firewall_redirect_port rule
	[ -n "$vpsfwlist" ] || [ -n "$vpsfw6list" ] && {
		logger -t "OMR-VPS" "Remove old firewall rules"
		_vps_firewall_close_port
	}
	uci -q batch <<-EOF >/dev/null
		set openmptcprouter.${fwservername}.set_firewall=0
		commit openmptcprouter
	EOF
}

set_vps_firewall() {
	local server_opt=$2
	if [ -n "$server_opt" ]; then
		_set_vps_firewall $server_opt
	else
		config_load openmptcprouter
		config_foreach _set_vps_firewall server
	fi
}

_set_ss_redir() {
	local option=$2
	local value=$3
	if [ "$value" = "true" ]; then
		value=1
	elif [ "$value" = "false" ]; then
		value=0
	fi
	uci -q set shadowsocks-libev.$1.$option=$value
}

_set_ss_server() {
	local option=$2
	local value=$3
	if [ "$value" = "true" ]; then
		value=1
	elif [ "$value" = "false" ]; then
		value=0
	fi
	if [ "$(echo $1 | grep omr)" != "" ] || [ "$(echo $1 | grep sss)" ]; then 
		uci -q set shadowsocks-libev.$1.$option=$value
	fi
}

_set_config_from_vps() {
	local shadowsocks_disabled vpn glorytun_state redirect shorewall_redirect mlvpn_key openvpn_key dsvpn_key
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return

	logger -t "OMR-VPS" "Get config from server ${servername}..."
	noerror=1
	# get VPS ip
	vpsip="$(uci -q get openmptcprouter.${servername}.ip | awk '{print $1}')"
	vps_lastchange="$(echo "$vps_config" | jsonfilter -q -e '@.vps.lastchange')"
	lastchange="$(uci -q get openmptcprouter.${servername}.lastchange)"
	[ -z "$lastchange" ] && lastchange=0
	#[ -n "$lastchange" ] && [ -n "$vps_lastchange" ] && [ "$lastchange" -gt "$vps_lastchange" ] && return
	user_permission="$(echo "$vps_config" | jsonfilter -q -e '@.user.permission')"
	[ -z "$user_permission" ] && user_permission="rw"

	vpsinternet="$(echo "$vps_config" | jsonfilter -q -e '@.network.internet')"
	if [ "$vpsinternet" = "false" ] && [ "$(uci -q get openmptcprouter.settings.external_check)" != "0" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.settings.external_check='0'
		EOF
		logger -t "OMR-VPS" "OMR-Tracker restart..."
		/etc/init.d/omr-tracker restart
	fi

	ula="$(echo "$vps_config" | jsonfilter -q -e '@.ip6in4.ula')"
	if [ -n "$ula" ] && [[ "$ula" != *" "* ]]; then
		uci -q batch <<-EOF >/dev/null
		set network.globals.ula_prefix=$ula
		EOF
	fi

	# Set current VPN
	current_vpn="$(uci -q get openmptcprouter.settings.vpn)"
	if [ -z "$current_vpn" ] || ([ -n "$vps_lastchange" ] && [ "$vps_lastchange" -gt "$lastchange" ]) || [ "$user_permission" = "ro" ]; then
		current_vpn="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.current')"
		if [ -n "$current_vpn" ]; then
			uci -q batch <<-EOF >/dev/null
			set openmptcprouter.settings.vpn=${current_vpn}
			commit openmptcprouter
			EOF
		fi
	fi

	# Set current Proxy
	current_proxy="$(uci -q get openmptcprouter.settings.proxy)"
	if [ -z "$current_proxy" ] || ([ -n "$vps_lastchange" ] && [ "$vps_lastchange" -gt "$lastchange" ]) || [ "$user_permission" = "ro" ]; then
		current_proxy="$(echo "$vps_config" | jsonfilter -q -e '@.proxy.current')"
		if [ -n "$current_proxy" ]; then
			uci -q batch <<-EOF >/dev/null
			set openmptcprouter.settings.proxy=${current_proxy}
			commit openmptcprouter
			EOF
			if [ "$current_proxy" = "shadowsocks" ]; then
				uci -q batch <<-EOF >/dev/null
					set shadowsocks-libev.sss0.disabled=0
					commit shadowsocks-libev
					set v2ray.main.enabled=0
					commit v2ray
					set openmptcprouter.settings.shadowsocks_disable=0
					commit openmptcprouter
				EOF
			elif [ "$current_proxy" = "v2ray" ]; then
				uci -q batch <<-EOF >/dev/null
					set shadowsocks-libev.sss0.disabled=1
					commit shadowsocks-libev
					set v2ray.main.enabled=1
					commit v2ray
					set openmptcprouter.settings.shadowsocks_disable=1
					commit openmptcprouter
				EOF
			elif [ "$current_proxy" = "none" ]; then
				uci -q batch <<-EOF >/dev/null
					set shadowsocks-libev.sss0.disabled=1
					commit shadowsocks-libev
					set v2ray.main.enabled=0
					commit v2ray
					set openmptcprouter.settings.shadowsocks_disable=1
					commit openmptcprouter
				EOF
			fi
		fi
	fi

	# Shadowsocks settings
	shadowsocks_disabled="$(uci -q get openmptcprouter.settings.shadowsocks_disable)"
	[ -z "$shadowsocks_disabled" ] && shadowsocks_disabled=0
	ss_key="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.key')"
	ss_key="$(echo $ss_key | sed 's/-/+/g; s/_/\//g;')"
	if [ -n "$ss_key" ] && [ "$ss_key" != "$(uci -q get shadowsocks-libev.sss0.key)" ]; then
		ss_method="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.method')"
		ss_port="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.port')"
		ss_ebpf="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.ebpf')"
		if [ "$ss_ebpf" = "true" ] && [ "$ss_method" = "none" ]; then
			ss_ebpf=1
		else
			ss_ebpf=0
		fi
		[ -z "$ss_port" ] && ss_port=65101
		ss_no_delay="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.no_delay')"
		ss_fast_open="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.fast_open')"
		ss_obfs="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs')"
		if [ "$ss_obfs" = "true" ]; then
			ss_obfs=1
		else
			ss_obfs=0
		fi
		ss_obfs_plugin="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs_plugin')"
		ss_obfs_type="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.obfs_type')"
		ss_obfs_host="$(echo "$vps_config" | jsonfilter -q -e '@.network.domain')"
		#ss_reuse_port="$(echo "$vps_config" | jsonfilter -q -e '@.shadowsocks.reuse_port')"
		config_load shadowsocks-libev
		config_foreach _set_ss_redir ss_redir "no_delay" $ss_no_delay
		config_foreach _set_ss_redir ss_redir "fast_open" $ss_fast_open
		config_foreach _set_ss_redir ss_redir "ebpf" $ss_ebpf
		config_foreach _set_ss_redir ss_local "no_delay" $ss_no_delay
		config_foreach _set_ss_redir ss_local "fast_open" $ss_fast_open
		config_foreach _set_ss_redir ss_local "ebpf" $ss_ebpf
		uci -q batch <<-EOF >/dev/null
			set shadowsocks-libev.sss0.key=$ss_key
			set shadowsocks-libev.sss0.server_port=$ss_port
			set shadowsocks-libev.sss0.method=$ss_method
			set shadowsocks-libev.sss0.disabled=$shadowsocks_disabled
			set shadowsocks-libev.sss0.obfs=$ss_obfs
			set shadowsocks-libev.sss0.obfs_plugin=$ss_obfs_plugin
			set shadowsocks-libev.sss0.obfs_type=$ss_obfs_type
			set shadowsocks-libev.sss0.obfs_host=$ss_obfs_host
		EOF
		config_foreach _set_ss_server server "key" $ss_key
		config_foreach _set_ss_server server "method" $ss_method
		config_foreach _set_ss_server server "obfs" $ss_obfs
		config_foreach _set_ss_server server "obfs_plugin" $ss_obfs_plugin
		config_foreach _set_ss_server server "obfs_type" $ss_obfs_type
		config_foreach _set_ss_server server "obfs_host" $ss_obfs_host
		if [ "$(uci -q get shadowsocks-libev.sss0.server)" != "127.0.0.1" ]; then
			config_foreach _set_ss_server server "server" $vpsip
		fi
		uci -q commit shadowsocks-libev
		if [ "$(uci -q get shadowsocks-libev.sss0.disabled)" != "1" ]; then
			logger -t "OMR-VPS" "Shadowsocks restart..."
			/etc/init.d/shadowsocks-libev restart >/dev/null 2>&1
		fi
	fi

	# V2Ray settings
	v2ray_key="$(echo "$vps_config" | jsonfilter -q -e '@.v2ray.config.key')"
	#v2ray_port="$(echo "$vps_config" | jsonfilter -q -e '@.v2ray.config.port')"
	v2ray_port="65228"
	if ([ -n "$v2ray_key" ] && [ "$v2ray_key" != "$(uci -q get v2ray.omrout.s_vmess_user_id)" ]) || ([ -n "$v2ray_port" ] && [ "$v2ray_port" != "$(uci -q get v2ray.omrout.s_vmess.port)" ]); then
		uci -q batch <<-EOF >/dev/null
			set v2ray.omrout.s_vmess_user_id="$v2ray_key"
			set v2ray.omrout.s_vmess_port="$v2ray_port"
			set v2ray.omrout.s_vless_user_id="$v2ray_key"
			set v2ray.omrout.s_vless_port="$v2ray_port"
		EOF
		if [ "$(uci -q get v2ray.omrout.s_vmess_address)" != "127.0.0.1" ]; then
			uci -q set v2ray.omrout.s_vmess_address="$vpsip"
			uci -q set v2ray.omrout.s_vless_address="$vpsip"
		fi
		uci -q commit v2ray
		logger -t "OMR-VPS" "V2ray restart..."
		/etc/init.d/v2ray restart >/dev/null 2>&1
	fi

	# Glorytun settings
	glorytun_key="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.key')"
	glorytun_port="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.port')"
	if ([ -n "$glorytun_key" ] && [ "$glorytun_key" != "$(uci -q get glorytun.vpn.key)" ]) || ([ -n "$glorytun_port" ] || [ "$glorytun_port" != "$(uci -q get glorytun.vpn.port)" ]); then
		vpn="$(uci -q get openmptcprouter.settings.vpn)"
		glorytun_state=0
		if [ "$vpn" = "glorytun_tcp" ]; then
			glorytun_state=1
		fi
		[ -z "$glorytun_port" ] && glorytun_port="65001"
		glorytun_chacha="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.chacha')"
		[ -z "$glorytun_chacha" ] || [ "$glorytun_chacha" = "true" ] && glorytun_chacha=1
		[ "$glorytun_chacha" = "false" ] && glorytun_chacha=0
		uci -q batch <<-EOF >/dev/null
			set glorytun.vpn.port=$glorytun_port
			set glorytun.vpn.key=$glorytun_key
			set glorytun.vpn.enable=$glorytun_state
			set glorytun.vpn.chacha20=$glorytun_chacha
		EOF
		if [ "$(uci -q get glorytun.vpn.host)" != "127.0.0.1" ]; then
			uci -q set glorytun.vpn.host="$vpsip"
		fi
		uci -q commit glorytun
		logger -t "OMR-VPS" "Glorytun restart..."
		/etc/init.d/glorytun restart >/dev/null 2>&1
	fi
	if ([ -n "$glorytun_key" ] && [ "$glorytun_key" != "$(uci -q get glorytun-udp.vpn.key)" ]) || ([ -n "$glorytun_port" ] || [ "$glorytun_port" != "$(uci -q get glorytun-udp.vpn.port)" ]); then
		vpn="$(uci -q get openmptcprouter.settings.vpn)"
		glorytun_state=0
		if [ "$vpn" = "glorytun_udp" ]; then
			glorytun_state=1
		fi
		[ -z "$glorytun_port" ] && glorytun_port="65001"
		glorytun_chacha="$(echo "$vps_config" | jsonfilter -q -e '@.glorytun.chacha')"
		[ -z "$glorytun_chacha" ] || [ "$glorytun_chacha" = "true" ] && glorytun_chacha=1
		[ "$glorytun_chacha" = "false" ] && glorytun_chacha=0
		uci -q batch <<-EOF >/dev/null
			set glorytun-udp.vpn.port=$glorytun_port
			set glorytun-udp.vpn.key=$glorytun_key
			set glorytun-udp.vpn.enable=$glorytun_state
			set glorytun-udp.vpn.chacha=$glorytun_chacha
		EOF
		if [ "$(uci -q get glorytun-udp.vpn.host)" != "127.0.0.1" ]; then
			uci -q set glorytun-udp.vpn.host="$vpsip"
		fi
		uci -q commit glorytun-udp
		logger -t "OMR-VPS" "Glorytun UDP restart..."
		/etc/init.d/glorytun-udp restart >/dev/null 2>&1
	fi

	# OpenVPN settings
	openvpn_key="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.key')"
	[ -n "$openvpn_key" ] && {
		echo $openvpn_key | base64 -d > /etc/luci-uploads/openvpn.key
		openvpn_port="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.port')"
		[ -z "$openvpn_port" ] && openvpn_port="65001"
		vpn="$(uci -q get openmptcprouter.settings.vpn)"
		openvpn_state=0
		if [ "$vpn" = "openvpn" ]; then
			openvpn_state=1
		fi
		uci -q batch <<-EOF >/dev/null
			set openvpn.omr.port=$openvpn_port
			set openvpn.omr.secret="/etc/luci-uploads/openvpn.key"
		EOF
		if [ "$openvpn_state" = "1" ]; then
			uci -q set openvpn.omr.enabled=$openvpn_state
		else
			uci -q del openvpn.omr.enabled
		fi
		if [ "$(uci -q get openvpn.omr.remote)" != "127.0.0.1" ]; then
			uci -q set openvpn.omr.remote="$vpsip"
		fi
		uci -q commit openvpn
		logger -t "OMR-VPS" "OpenVPN restart..."
		/etc/init.d/openvpn restart
	}
	openvpn_client_key="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_key')"
	[ -n "$openvpn_client_key" ] && {
		echo $openvpn_client_key | base64 -d > /etc/luci-uploads/client.key
	}
	openvpn_client_crt="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_crt')"
	[ -n "$openvpn_client_crt" ] && {
		echo $openvpn_client_crt | base64 -d > /etc/luci-uploads/client.crt
	}
	openvpn_client_ca="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.client_ca')"
	[ -n "$openvpn_client_ca" ] && {
		echo $openvpn_client_ca | base64 -d > /etc/luci-uploads/ca.crt
	}
	[ -n "$openvpn_client_key" ] && [ -n "$openvpn_client_crt" ] && [ -n "$openvpn_client_ca" ] && {
		openvpn_port="$(echo "$vps_config" | jsonfilter -q -e '@.openvpn.port')"
		[ -z "$openvpn_port" ] && openvpn_port="65001"
		vpn="$(uci -q get openmptcprouter.settings.vpn)"
		openvpn_state=0
		if [ "$vpn" = "openvpn" ]; then
			openvpn_state=1
		fi
		uci -q batch <<-EOF >/dev/null
			set openvpn.omr.port=$openvpn_port
			set openvpn.omr.key="/etc/luci-uploads/client.key"
			set openvpn.omr.cert="/etc/luci-uploads/client.crt"
			set openvpn.omr.ca="/etc/luci-uploads/ca.crt"
			set openvpn.omr.enabled=$openvpn_state
			set openvpn.omr.tls_client=1
			set openvpn.omr.client=1
			set openvpn.omr.allow_recursive_routing=1
		EOF
		if [ "$(uci -q get openvpn.omr.remote)" != "127.0.0.1" ]; then
			uci -q set openvpn.omr.remote="$vpsip"
		fi
		uci -q commit openvpn
		logger -t "OMR-VPS" "OpenVPN restart..."
		/etc/init.d/openvpn restart
	}

	# MLVPN settings
	mlvpn_key="$(echo "$vps_config" | jsonfilter -q -e '@.mlvpn.key')"
	if [ -n "$mlvpn_key" ] && [ "$mlvpn_key" != "$(uci -q get mlvpn.general.password)" ] && [ -f /etc/init.d/mlvpn ]; then
		vpn="$(uci -q get openmptcprouter.settings.vpn)"
		mlvpn_state=0
		if [ "$vpn" = "mlvpn" ]; then
			mlvpn_state=1
		fi
		uci -q batch <<-EOF >/dev/null
			set mlvpn.general.password=$mlvpn_key
			set mlvpn.general.enable=$mlvpn_state
			commit mlvpn
		EOF
		if [ "$(uci -q get mlvpn.general.host)" != "127.0.0.1" ]; then
			uci -q set mlvpn.general.host="$vpsip"
		fi
		uci -q commit mlvpn
		logger -t "OMR-VPS" "MLVPN restart..."
		/etc/init.d/mlvpn restart
	fi

	# DSVPN settings
	dsvpn_key="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.key')"
	dsvpn_port="$(echo "$vps_config" | jsonfilter -q -e '@.dsvpn.port')"
	if ([ -n "$dsvpn_key" ] && [ "$dsvpn_key" != "$(uci -q get dsvpn.vpn.key)" ]) || ([ -n "$dsvpn_port" ] && [ "$dsvpn_port" != "$(uci -q get dsvpn.vpn.port)" ]); then
		dsvpn_state=0
		if [ "$vpn" = "dsvpn" ]; then
			dsvpn_state=1
		fi
		uci -q batch <<-EOF >/dev/null
			set dsvpn.vpn.key=$dsvpn_key
			set dsvpn.vpn.enable=$dsvpn_state
			set dsvpn.vpn.port=$dsvpn_port
			commit dsvpn
		EOF
		if [ "$(uci -q get dsvpn.vpn.host)" != "127.0.0.1" ]; then
			uci -q set dsvpn.vpn.host="$vpsip"
		fi
		uci -q commit dsvpn
		logger -t "OMR-VPS" "DSVPN restart..."
		/etc/init.d/dsvpn restart
	fi

	# Shorewall settings
	shorewall_redirect="$(echo "$vps_config" | jsonfilter -q -e '@.shorewall.redirect_ports')"
	[ "$shorewall_redirect" = "enable" ] && redirect="1"
	[ "$shorewall_redirect" = "disable" ] && redirect="0"
	uci -q batch <<-EOF >/dev/null
		set openmptcprouter.${servername}.redirect_ports=$redirect
	EOF

	# Wireguard settings
	wireguard_key="$(echo "$vps_config" | jsonfilter -q -e '@.wireguard.key')"
	uci -q batch <<-EOF >/dev/null
		set openmptcprouter.${servername}.wgkey=$wireguard_key
	EOF

	# MPTCP settings
	mptcp_path_manager="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.path_manager')"
	mptcp_scheduler="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.scheduler')"
	mptcp_checksum="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.checksum')"
	mptcp_syn_retries="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.syn_retries')"
	mptcp_enabled="$(echo "$vps_config" | jsonfilter -q -e '@.mptcp.enabled')"
	if [ "$mptcp_enabled" = "0" ]; then
		mptcp_enabled="disable"
	else
		mptcp_enabled="enable"
	fi
	congestion="$(echo "$vps_config" | jsonfilter -q -e '@.network.congestion_control')"
	uci -q batch <<-EOF >/dev/null
		set network.globals.multipath=$mptcp_enabled
		set network.globals.mptcp_checksum=$mptcp_checksum
		set network.globals.congestion=$congestion
		commit network
	EOF
	if [ "$mptcp_path_manager" != "" ] && [ "$mptcp_scheduler" != "" ] && [ "$mptcp_syn_retries" != "" ]; then
		uci -q batch <<-EOF >/dev/null
			set network.globals.mptcp_path_manager=$mptcp_path_manager
			set network.globals.mptcp_scheduler=$mptcp_scheduler
			set network.globals.mptcp_syn_retries=$mptcp_syn_retries
			commit network
		EOF
	fi

	# Check if server get an IPv6, if not disable IPv6 on OMR
	vps_ipv6_addr="$(echo "$vps_config" | jsonfilter -q -e '@.network.ipv6')"
	if [ -z "$vps_ipv6_addr" ]; then
		if [ "$(uci -q get openmptcprouter.settings.disable_ipv6)" = "0" ]; then
			logger -t "OMR-VPS" "No IPv6 support on VPS side. IPv6 disabled."
		fi
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.settings.disable_ipv6=1
		EOF
		#sysctl -qw net.ipv6.conf.all.disable_ipv6=1
	else
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.ipv6=$vps_ipv6_addr
		EOF
	fi

	omr6in4_vps_localip="$(echo "$vps_config" | jsonfilter -q -e '@.ip6in4.localip')"
	omr6in4_vps_remoteip="$(echo "$vps_config" | jsonfilter -q -e '@.ip6in4.remoteip')"
	if ([ -n "$omr6in4_vps_localip" ] && [ "$omr6in4_vps_localip" != "$(uci -q get network.omr6in4.gateway)" ]) || ([ -n "$omr6in4_vps_remoteip" ] && [ "$omr6in4_vps_remoteip" != "$(uci -q get network.omr6in4.ip6addr)" ]); then
		logger -t "OMR-VPS" "Set omr6in4 ip address and gateway"
		uci -q batch <<-EOF >/dev/null
			set network.omr6in4.ip6addr="$omr6in4_vps_remoteip"
			set network.omr6in4.gateway="$omr6in4_vps_localip"
			commit network
		EOF
		/etc/init.d/network restart
		sleep 6
	fi

	# Get VPS iperf config
	iperf_user="$(echo "$vps_config" | jsonfilter -q -e '@.iperf.user')"
	iperf_pass="$(echo "$vps_config" | jsonfilter -q -e '@.iperf.password')"
	iperf_key="$(echo "$vps_config" | jsonfilter -q -e '@.iperf.key')"
	uci -q batch <<-EOF >/dev/null
		del iperf.${servername}
		set iperf.${servername}=server
		set iperf.${servername}.host=$server
		set iperf.${servername}.ports=65400
		set iperf.${servername}.ipv4=1
		set iperf.${servername}.ipv6=0
		set iperf.${servername}.speed=1000
		set iperf.${servername}.tcp=1
		set iperf.${servername}.udp=1
		set iperf.${servername}.user=$iperf_user
		set iperf.${servername}.password=$iperf_pass
		set iperf.${servername}.key="$iperf_key"
		commit iperf
	EOF

	# Get available server
	available_vpn="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.available' | sed -e 's/\[ //' -e 's/ \]//' -e 's/,//g')"
	uci -q batch <<-EOF >/dev/null
		del openmptcprouter.${servername}.available_vpn
	EOF

	if [ "$user_permission" = "ro" ]; then
		current_vpn="$(echo "$vps_config" | jsonfilter -q -e '@.vpn.current')"
		if [ -n "$current_vpn" ]; then
			uci -q batch <<-EOF >/dev/null
				set openmptcprouter.${servername}.available_vpn=${current_vpn}
			EOF
		fi
	
	else
		if [ -n "$available_vpn" ]; then
			for vpn in $available_vpn; do
				uci -q batch <<-EOF >/dev/null
					add_list openmptcprouter.${servername}.available_vpn=$vpn
				EOF
			done
		fi
	fi
	if [ "$noerror" = "1" ]; then
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.get_config=0
			commit openmptcprouter
		EOF
	fi
}

_backup_send() {
	servername=$1
	[ -z "$(uci -q get openmptcprouter.${servername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.port)" ] && return
	token=""
	vps_config=""
	_login
	[ -z "$token" ] && {
		logger -t "OMR-VPS" "Can't get ${servername} token, try later"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.admin_error=1
		EOF
		return
	}
	sysupgrade -k -b /tmp/backup.tar.gz
	backup_data="$(cat /tmp/backup.tar.gz | base64 | tr -d '\n')"
	backup_sha256sum="$(sha256sum /tmp/backup.tar.gz | awk '{print $1}')"
	[ -n "$backup_data" ] && {
		logger -t "OMR-VPS" "Send backup file to server $servername"
		local backupjson
		backupjson='{"data": "'$backup_data'","sha256sum": "'$backup_sha256sum'"}'
		result=$(_set_json "backuppost" "$backupjson")
		uci -q set openmptcprouter.$servername.lastbackup=$(date +%s)
	}
}

backup_send() {
	config_load openmptcprouter
	config_foreach _backup_send server
}


_backup_get() {
	servername=$1
	[ -z "$(uci -q get openmptcprouter.${servername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.port)" ] && return
	[ -z "$lastbackup" ] || [ "$lastbackup" -lt "$(uci -q get openmptcprouter.$servername.lastbackup)" ] && {
		lastbackup="$(uci -q get openmptcprouter.$servername.lastbackup)"
		serverbackup="$servername"
	}
}

_backup_get_and_apply() {
	servername=$1
	token=""
	vps_config=""
	_login
	[ -z "$token" ] && {
		logger -t "OMR-VPS" "Can't get ${servername} token, try later"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.admin_error=1
		EOF
		return
	}
	vps_backup=$(_get_json "backupget")
	[ -z "$vps_backup" ] && return
	backup_data="$(echo "$vps_backup" | jsonfilter -q -e '@.data')"
	backup_sha256sum="$(echo "$vps_backup" | jsonfilter -q -e '@.sha256sum')"
	[ -n "$backup_data" ] && {
		echo $backup_data | base64 -d > /tmp/backup.tar.gz
		sysupgrade -r /tmp/backup.tar.gz
	}
}

backup_get() {
	lastbackup=""
	serverbackup=""
	config_load openmptcprouter
	config_foreach _backup_get server
	[ -n "$serverbackup" ] && _backup_get_and_apply $serverbackup
}

_backup_list() {
	bservername=$1
	[ -z "$servername" ] && servername=$bservername
	[ -z "$(uci -q get openmptcprouter.${servername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.port)" ] && return
	token=""
	vps_config=""
	_login
	[ -z "$token" ] && {
		logger -t "OMR-VPS" "Can't get ${servername} token, try later"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.admin_error=1
		EOF
		return
	}
	vps_backup=$(_get_json "backuplist")
	[ -z "$vps_backup" ] && return
	backup_lastmodif="$(echo "$vps_backup" | jsonfilter -q -e '@.modif')"
	[ -n "$backup_lastmodif" ] && {
		uci -q set openmptcprouter.$servername.lastbackup=$backup_lastmodif
	}
}



backup_list() {
	config_load openmptcprouter
	config_foreach _backup_list server
	uci -q commit openmptcprouter
}


_count_server() {
	local servername=$1
	[ -z "$(uci -q get openmptcprouter.${servername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.port)" ] && return
	serversnb=$((serversnb+1))
}

_get_token() {
	servername=$1
	[ -z "$(uci -q get openmptcprouter.${servername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.port)" ] && return
	[ -z "$(uci -q get openmptcprouter.${servername}.ip)" ] && return
	[ "$(uci -q get openmptcprouter.${servername}.disabled)" = "1" ] && return
	token=""
	_login
	[ -z "$token" ] && {
		reason=""
		test_ping() {
			_ping_server $1
			status=$?
			if $(exit $status); then
				reason="can ping server ${servername} on $1"
			else
				reason="can't ping server ${servername} on $1"
			fi
		}
		config_list_foreach "${servername}" ip test_ping
		port="$(uci -q get openmptcprouter.${servername}.port)"
		api_test() {
			server="$1"
			resolve="$(resolveip $server)"
			valid_ip6=$(valid_subnet6 $server)
			if [ "$resolve" != "$server" ] || [ "$valid_ip6" != "ok" ]; then
				if [ "$(curl -k -m 3 https://${server}:${port}/)" = "" ]; then
					reason="$reason, no server API answer on $1"
				else
					reason="$reason, server API answer on $1"
				fi
			else
				if [ "$(curl -k -m 3 https://[${server}]:${port}/)" = "" ]; then
					reason="$reason, no server API answer on $1"
				else
					reason="$reason, server API answer on $1"
				fi
			fi
		}
		config_list_foreach "${servername}" ip api_test
		if [ "$(uci -q get openmptcprouter.${servername}.username)" != "openmptcprouter" ]; then
			reason="$reason, custom username"
		fi
		logger -t "OMR-VPS" "Can't get ${servername} token, try later ($reason)"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${servername}.admin_error=1
		EOF
	}
	echo "$server:$serverport:$token"
}

_config_service() {
	servername=$1
	vps_config=""
	tokenserver=$(_get_token $servername)
	server="$(echo $tokenserver | cut -f1 -d:)"
	serverport="$(echo $tokenserver | cut -f2 -d:)"
        token="$(echo $tokenserver | cut -f3 -d:)"
	[ -z "$token" ] && return
	error=0
	if [ -n "$serial" ]; then
		[ -z "$vps_config" ] && vps_config=$(_get_json "config?serial=${serial}")
		if [ -n "$vps_config" ] && [ "$( echo "$vps_config" | jsonfilter -q -e '@.error')" = "False serial number" ]; then
			logger -t "OMR-VPS" "Invalid serial number"
			sed -i "s:${server}::g" /etc/config/*
			return
		fi
	fi
	[ "$(uci -q get openmptcprouter.${servername}.get_config)" = "1" ] && [ "$(uci -q get openmptcprouter.${servername}.master)" = "1" ] && {
		_set_config_from_vps
		_get_gre_tunnel
	}

	[ "$(uci -q get openmptcprouter.${servername}.master)" = "1" ] && {
		_get_vps_config
	}
	[ -z "$vps_config" ] && vps_config=$(_get_json "config")
	[ -z "$vps_config" ] && return
	user_permission="$(echo "$vps_config" | jsonfilter -q -e '@.user.permission')"

	if [ "$(uci -q get openmptcprouter.settings.firstboot)" != "0" ]; then
		[ -n "$vps_config" ] && [ -n "$(cat /proc/cpuinfo | grep aes)" ] && {
			vps_aes="$(echo "$vps_config" | jsonfilter -q -e '@.vps.aes')"
			if [ "$vps_aes" != "false" ] && [ "$user_permission" != "ro" ]; then
				logger -t "OMR-VPS" "CPU support AES, set it by default"
				method="$(uci -q get shadowsocks-libev.sss0.method)"
				uci -q batch <<-EOF >/dev/null
					set glorytun.vpn.chacha20="0"
					commit glorytun
					set glorytun-udp.vpn.chacha="0"
					commit glorytun-udp
				EOF
				config_foreach _set_ss_server server "method" "aes-256-gcm"
				uci -q commit shadowsocks-libev
				[ "$method" != "aes-256-gcm" ] && {
					logger -t "OMR-VPS" "Shadowsocks restart"
					/etc/init.d/shadowsocks-libev restart
				}
			fi
		}
	fi
	if [ "$user_permission" != "ro" ]; then
		#config_load shadowsocks-libev
		#config_foreach _set_ss_server_vps server
		_set_ss_server_vps
		_set_v2ray_server_vps
		[ -z "$(_set_glorytun_vps)" ] && error=1
		[ -z "$(_set_openvpn_vps)" ] && error=1
		[ -z "$(_set_mlvpn_vps)" ] && error=1
		_set_vps_firewall
		[ -z "$(_set_wireguard_vps)" ] && error=1
	fi
	_backup_list
	redirect_port="0"
	if [ "$(uci -q get openmptcprouter.${servername}.redirect_ports)" = "1" ] || [ "$(uci -q get upnpd.config.enabled)" = "1" ]; then
		redirect_port="1"
	fi
	if [ "$user_permission" != "ro" ]; then
		[ -z "$(_set_redirect_ports_from_vps $redirect_port)" ] && error=1
		[ -z "$(_set_mptcp_vps)" ] && error=1
		[ -z "$(_set_vpn_vps)" ] && error=1
		[ -z "$(_set_proxy_vps)" ] && error=1
	fi
	[ "$(uci -q get shadowsocks-libev.sss0.key)" = "" ] && uci -q set openmptcprouter.${servername}.get_config=1
	
	#_set_pihole
	[ -n "$wanips" ] && _set_wan_ip
	_set_vpn_ip
	config_load network
	lanips=""
	config_foreach _get_lan_ip interface
	_set_lan_ip
	_set_sipalg
	config_foreach _delete_client2client route
	if [ "$(uci -q get openmptcprouter.settings.vpn)" != "openvpn" ] && [ "$(echo "$vps_config" | jsonfilter -q -e '@.client2client.enabled')" == "true" ]; then
		_set_client2client
	fi
	if [ "$error" = 0 ]; then
		#logger -t "OMR-VPS" "No errors"
		uci -q set openmptcprouter.${servername}.lastchange=$(date "+%s")
		[ -n "$vps_config" ] && uci -q set openmptcprouter.settings.firstboot=0
	else
		logger -t "OMR-VPS" "Setting server config error, try again"
	fi
	#[ "$error" != 0 ] && logger -t "OMR-VPS" "Error !"
	uci -q batch <<-EOF >/dev/null
		set openmptcprouter.${servername}.admin_error=$error
		commit openmptcprouter
	EOF
}

_set_pihole_server() {
	pservername=$1
	[ -z "$servername" ] && servername=$pservername
	[ -z "$(uci -q get openmptcprouter.${pservername}.username)" ] && return
	[ -z "$(uci -q get openmptcprouter.${pservername}.password)" ] && return
	[ -z "$(uci -q get openmptcprouter.${pservername}.port)" ] && return
	token=""
	vps_config=""
	_login
	[ -z "$token" ] && {
		logger -t "OMR-VPS" "Can't get token, try later"
		uci -q batch <<-EOF >/dev/null
			set openmptcprouter.${pservername}.admin_error=1
		EOF
		return
	}
	_get_pihole $pservername
}

set_pihole() {
	config_load openmptcprouter
	config_foreach _set_pihole_server server
}

token() {
	config_load openmptcprouter
	config_foreach _get_token server
}

start_service() {
	serversnb=0
	wanips=""
	serial=$(cat /proc/cpuinfo | grep Serial | awk '{print $3}')
	[ -z "$serial" ] && [ -f "/usr/sbin/dmidecode" ] && serial=$(/usr/sbin/dmidecode -t 1 | egrep 'Serial' | awk '{print $3}')
	uci -q set openmptcprouter.settings.serial=${serial}
	config_load openmptcprouter
	config_foreach _count_server server
	config_foreach _get_local_wan_ip interface
	config_foreach _config_service server

	uci -q batch <<-EOF >/dev/null
		commit openmptcprouter
	EOF
	if [ "$(ps w | grep sysupgrade)" = "" ]; then
		/etc/init.d/sysupgrade restart
	fi
}

service_triggers() {
	#procd_add_reload_trigger openmptcprouter network shadowsocks-libev v2ray glorytun glorytun-udp mlvpn openvpn dsvpn
	procd_add_reload_trigger shadowsocks-libev v2ray glorytun glorytun-udp mlvpn dsvpn
	procd_add_config_trigger "config.change" "firewall" /etc/init.d/openmptcprouter-vps set_vps_firewall
	#procd_add_config_trigger "config.change" "network" /etc/init.d/openmptcprouter-vps set_gre_tunnel
	#procd_add_reload_trigger openmptcprouter shadowsocks-libev network upnpd
}