Fix RUTX support

root/target/linux/ipq40xx/base-files/lib/functions/caldata.sh

@@ -0,0 +1,171 @@
+# Copyright (C) 2019 OpenWrt.org
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+caldata_dd() {
+	local source=$1
+	local target=$2
+	local count=$(($3))
+	local offset=$(($4))
+
+	dd if=$source of=$target iflag=skip_bytes,fullblock bs=$count skip=$offset count=1 2>/dev/null
+	return $?
+}
+
+caldata_die() {
+	echo "caldata: " "$*"
+	exit 1
+}
+
+caldata_extract() {
+	local part=$1
+	local offset=$(($2))
+	local count=$(($3))
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || caldata_die "no mtd device found for partition $part"
+
+	caldata_dd $mtd /lib/firmware/$FIRMWARE $count $offset || \
+		caldata_die "failed to extract calibration data from $mtd"
+}
+
+caldata_extract_ubi() {
+	local part=$1
+	local offset=$(($2))
+	local count=$(($3))
+	local ubidev
+	local ubi
+
+	. /lib/upgrade/nand.sh
+
+	ubidev=$(nand_find_ubi $CI_UBIPART)
+	ubi=$(nand_find_volume $ubidev $part)
+	[ -n "$ubi" ] || caldata_die "no UBI volume found for $part"
+
+	caldata_dd /dev/$ubi /lib/firmware/$FIRMWARE $count $offset || \
+		caldata_die "failed to extract calibration data from $ubi"
+}
+
+caldata_extract_reverse() {
+	local part=$1
+	local offset=$2
+	local count=$(($3))
+	local mtd
+	local reversed
+	local caldata
+
+	mtd=$(find_mtd_chardev "$part")
+	reversed=$(hexdump -v -s $offset -n $count -e '/1 "%02x "' $mtd)
+
+	for byte in $reversed; do
+		caldata="\x${byte}${caldata}"
+	done
+
+	printf "%b" "$caldata" > /lib/firmware/$FIRMWARE
+}
+
+caldata_from_file() {
+	local source=$1
+	local offset=$(($2))
+	local count=$(($3))
+	local target=$4
+
+	[ -n "$target" ] || target=/lib/firmware/$FIRMWARE
+
+	caldata_dd $source $target $count $offset || \
+		caldata_die "failed to extract calibration data from $source"
+}
+
+caldata_sysfsload_from_file() {
+	local source=$1
+	local offset=$(($2))
+	local count=$(($3))
+	local target_dir="/sys/$DEVPATH"
+	local target="$target_dir/data"
+
+	[ -d "$target_dir" ] || \
+		caldata_die "no sysfs dir to write: $target"
+
+	echo 1 > "$target_dir/loading"
+	caldata_dd $source $target $count $offset
+	if [ $? != 0 ]; then
+		echo 1 > "$target_dir/loading"
+		caldata_die "failed to extract calibration data from $source"
+	else
+		echo 0 > "$target_dir/loading"
+	fi
+}
+
+caldata_valid() {
+	local expected="$1"
+	local target=$2
+
+	[ -n "$target" ] || target=/lib/firmware/$FIRMWARE
+
+	magic=$(hexdump -v -n 2 -e '1/1 "%02x"' $target)
+	[ "$magic" = "$expected" ]
+	return $?
+}
+
+caldata_patch_chksum() {
+	local mac=$1
+	local mac_offset=$(($2))
+	local chksum_offset=$(($3))
+	local target=$4
+	local xor_mac
+	local xor_fw_mac
+	local xor_fw_chksum
+
+	xor_mac=${mac//:/}
+	xor_mac="${xor_mac:0:4} ${xor_mac:4:4} ${xor_mac:8:4}"
+
+	xor_fw_mac=$(hexdump -v -n 6 -s $mac_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+	xor_fw_mac="${xor_fw_mac:0:4} ${xor_fw_mac:4:4} ${xor_fw_mac:8:4}"
+
+	xor_fw_chksum=$(hexdump -v -n 2 -s $chksum_offset -e '/1 "%02x"' /lib/firmware/$FIRMWARE)
+	xor_fw_chksum=$(xor $xor_fw_chksum $xor_fw_mac $xor_mac)
+
+	printf "%b" "\x${xor_fw_chksum:0:2}\x${xor_fw_chksum:2:2}" | \
+		dd of=$target conv=notrunc bs=1 seek=$chksum_offset count=2
+}
+
+caldata_patch_mac() {
+	local mac=$1
+	local mac_offset=$(($2))
+	local chksum_offset=$3
+	local target=$4
+
+	[ -z "$mac" -o -z "$mac_offset" ] && return
+
+	[ -n "$target" ] || target=/lib/firmware/$FIRMWARE
+
+	[ -n "$chksum_offset" ] && caldata_patch_chksum "$mac" "$mac_offset" "$chksum_offset" "$target"
+
+	macaddr_2bin $mac | dd of=$target conv=notrunc oflag=seek_bytes bs=6 seek=$mac_offset count=1 || \
+		caldata_die "failed to write MAC address to eeprom file"
+}
+
+ath9k_patch_mac() {
+	local mac=$1
+	local target=$2
+
+	caldata_patch_mac "$mac" 0x2 "" "$target"
+}
+
+ath9k_patch_mac_crc() {
+	local mac=$1
+	local mac_offset=$2
+	local chksum_offset=$((mac_offset - 10))
+	local target=$4
+
+	caldata_patch_mac "$mac" "$mac_offset" "$chksum_offset" "$target"
+}
+
+ath10k_patch_mac() {
+	local mac=$1
+	local target=$2
+
+	caldata_patch_mac "$mac" 0x6 0x2 "$target"
+}