1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00

Add initial Teltonika RUTX support

This commit is contained in:
Ycarus (Yannick Chabanois) 2022-02-22 20:09:37 +01:00
parent b851e590b9
commit 1fa68fe642
15 changed files with 1584 additions and 3 deletions

View file

@ -39,7 +39,8 @@ ALLWIFIBOARDS:= \
linksys_ea8300 \
p2w_r619ac \
mobipromo_cm520-79f \
qxwlan_e2600ac
qxwlan_e2600ac \
teltonika_rutx
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@ -115,5 +116,6 @@ $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
$(eval $(call generate-ipq-wifi-package,teltonika_rutx,Teltonika RUTX))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

View file

@ -31,7 +31,8 @@ ipq40xx_setup_interfaces()
zyxel,wre6606)
ucidef_set_interface_lan "eth0"
;;
aruba,ap-303h)
aruba,ap-303h|\
teltonika,rutx10)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"

View file

@ -134,6 +134,10 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
;;
teltonika,rutx10)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x1000 0x2f20
@ -229,6 +233,10 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
;;
teltonika,rutx10)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x5000 0x2f20

View file

@ -113,6 +113,10 @@ platform_do_upgrade() {
PART_NAME="inactive"
platform_do_upgrade_openmesh "$1"
;;
teltonika,rutx10)
CI_UBIPART="rootfs"
nand_do_upgrade "$1"
;;
zyxel,nbg6617)
zyxel_do_upgrade "$1"
;;

View file

@ -0,0 +1,57 @@
#include "qcom-ipq4018-rutx-common.dtsi"
#include "qcom-ipq4018-rutx-shiftreg.dtsi"
/ {
model = "RUTX08/10";
soc {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <0>;
gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
};
gpio_modem_power {
gpio-export,name = "modem_power";
gpio-export,output = <0>;
gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
};
gpio_sim_select {
gpio-export,name = "sim_sel";
gpio-export,output = <1>;
gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
};
gpio_out_1 {
gpio-export,name = "gpio23";
gpio-export,output = <0>;
gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
};
gpio_in_1 {
gpio-export,name = "gpio24";
gpio-export,input = <0>;
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
led_wifi_24 {
label = "wifi_gen_2";
gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
};
led_wifi_50 {
label = "wifi_gen_5";
gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
};
};
};
};

View file

@ -0,0 +1,122 @@
#include "qcom-ipq4018-rutx-common.dtsi"
#include "qcom-ipq4018-rutx-shiftreg.dtsi"
/ {
model = "RUTX09/11";
soc {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <0>;
gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
};
gpio_modem_power {
gpio-export,name = "modem_power";
gpio-export,output = <0>;
gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
};
gpio_sim_select {
gpio-export,name = "sim_sel";
gpio-export,output = <1>;
gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
};
gpio_out_1 {
gpio-export,name = "gpio23";
gpio-export,output = <0>;
gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
};
gpio_in_1 {
gpio-export,name = "gpio24";
gpio-export,input = <0>;
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
led_wan_sim1 {
label = "wan_sim_1";
gpios = <&shift_io 21 GPIO_ACTIVE_HIGH>;
};
led_wan_sim2 {
label = "wan_sim_2";
gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
};
led_wan_eth {
label = "wan_wifi_4"; // not wan_eth_3 !
gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
};
led_wan_wifi {
label = "wan_eth_3"; // not wan_wifi_4 !
gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
};
led_gen_2 {
label = "mob_gen_2";
gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
};
led_gen_3 {
label = "mob_gen_3";
gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
};
led_gen_4 {
label = "mob_gen_4";
gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
};
led_ssid_1 {
label = "mob_ssid_1";
gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_2 {
label = "mob_ssid_2";
gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_3 {
label = "mob_ssid_3";
gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_4 {
label = "mob_ssid_4";
gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_5 {
label = "mob_ssid_5";
gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_wifi_24 {
label = "wifi_gen_2";
gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
};
led_wifi_50 {
label = "wifi_gen_5";
gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
};
};
};
};

View file

@ -0,0 +1,149 @@
#include "qcom-ipq4018-rutx-common.dtsi"
#include "qcom-ipq4018-rutx-shiftreg.dtsi"
/ {
model = "RUTX12";
soc {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <0>;
gpios = <&shift_io 16 GPIO_ACTIVE_HIGH>;
};
gpio_modem_power {
gpio-export,name = "modem_power";
gpio-export,output = <0>;
gpios = <&shift_io 17 GPIO_ACTIVE_HIGH>;
};
gpio_modem2_reset {
gpio-export,name = "modem2_reset";
gpio-export,output = <0>;
gpios = <&shift_io 18 GPIO_ACTIVE_HIGH>;
};
gpio_modem2_power {
gpio-export,name = "modem2_power";
gpio-export,output = <0>;
gpios = <&shift_io 19 GPIO_ACTIVE_HIGH>;
};
gpio_out_1 {
gpio-export,name = "gpio23";
gpio-export,output = <0>;
gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
};
gpio_in_1 {
gpio-export,name = "gpio24";
gpio-export,input = <0>;
gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
};
};
leds {
compatible = "gpio-leds";
led_wan_sim1 {
label = "wan_sim_1";
gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
};
led_wan_sim2 {
label = "wan_sim_2";
gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
};
led_wan_eth {
label = "wan_wifi_4"; // not wan_eth_3 !
gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
};
led_wan_wifi {
label = "wan_eth_3"; // not wan_wifi_4 !
gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
};
led_gen_2 {
label = "mob_gen_2";
gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
};
led_gen_3 {
label = "mob_gen_3";
gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
};
led_gen_4 {
label = "mob_gen_4";
gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
};
led2_gen_2 {
label = "mob2_gen_2";
gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
};
led2_gen_3 {
label = "mob2_gen_3";
gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
};
led2_gen_4 {
label = "mob2_gen_4";
gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
};
led_ssid_1 {
label = "mob_ssid_1";
gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_3 {
label = "mob_ssid_3";
gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_5 {
label = "mob_ssid_5";
gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_1 {
label = "mob2_ssid_1";
gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_3 {
label = "mob2_ssid_3";
gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_5 {
label = "mob2_ssid_5";
gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_wifi_24 {
label = "wifi_gen_2";
gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
};
led_wifi_50 {
label = "wifi_gen_5";
gpios = <&shift_io 23 GPIO_ACTIVE_HIGH>;
};
};
};
};

View file

@ -0,0 +1,84 @@
#include "qcom-ipq4018-rutx-common.dtsi"
#include "qcom-ipq4018-rutx-shiftreg.dtsi"
#include "qcom-ipq4018-rutx-i2c.dtsi" // SFP
/ {
model = "RUTXR1";
soc {
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <0>;
gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
};
gpio_modem_power {
gpio-export,name = "modem_power";
gpio-export,output = <0>;
gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
};
gpio_sim_select {
gpio-export,name = "sim_sel";
gpio-export,output = <1>;
gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_wan_sim1 {
label = "wan_sim_1";
gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
};
led_wan_sim2 {
label = "wan_sim_2";
gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
};
led_wan_eth {
label = "wan_wifi_4"; // not wan_eth_3 !
gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
};
led_wan_mob {
label = "wan_mob_5";
gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
};
led_gen_3 {
label = "mob_gen_3";
gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
};
led_gen_4 {
label = "mob_gen_4";
gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
};
led_ssid_1 {
label = "mob_ssid_1";
gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_3 {
label = "mob_ssid_3";
gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_5 {
label = "mob_ssid_5";
gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
};
};
};

View file

@ -0,0 +1,188 @@
#include "qcom-ipq4018-rutx-common.dtsi"
#include "qcom-ipq4018-rutx-i2c.dtsi"
/ {
model = "RUTX STM32";
io_expander = "stm32";
soc {
i2c_0: i2c@78b7000 {
stm32_io: stm32@74 {
#gpio-cells = <2>;
compatible = "tlt,stm32v1";
reg = <0x74>;
gpio-controller;
interrupt-parent = <&tlmm>;
interrupts = <5 2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
gpio-export {
compatible = "gpio-export";
#size-cells = <0>;
gpio_modem_reset {
gpio-export,name = "modem_reset";
gpio-export,output = <0>;
gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
};
gpio_modem_power {
gpio-export,name = "modem_power";
gpio-export,output = <0>;
gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
};
gpio_modem2_reset {
gpio-export,name = "modem2_reset";
gpio-export,output = <0>;
gpios = <&stm32_io 13 GPIO_ACTIVE_HIGH>;
};
gpio_modem2_power {
gpio-export,name = "modem2_power";
gpio-export,output = <0>;
gpios = <&stm32_io 14 GPIO_ACTIVE_HIGH>;
};
gpio_sim_select {
gpio-export,name = "sim_sel";
gpio-export,output = <1>;
gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
};
gpio_out_1 {
gpio-export,name = "gpio23";
gpio-export,output = <0>;
gpio-export,direction_may_change;
gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
};
gpio_in_1 {
gpio-export,name = "gpio24";
gpio-export,input = <0>;
gpio-export,direction_may_change;
gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_wan_sim1 {
label = "wan_sim_1";
gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
};
led_wan_sim2 {
label = "wan_sim_2";
gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
};
led_wan_eth {
label = "wan_eth_3";
gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
};
led_wan_wifi {
label = "wan_wifi_4";
gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
};
led_wan_mob {
label = "wan_mob_5";
gpios = <&stm32_io 16 GPIO_ACTIVE_HIGH>;
};
led_gen_2 {
label = "mob_gen_2";
gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
};
led_gen_3 {
label = "mob_gen_3";
gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
};
led_gen_4 {
label = "mob_gen_4";
gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
};
led2_gen_2 {
label = "mob2_gen_2";
gpios = <&stm32_io 32 GPIO_ACTIVE_HIGH>;
};
led2_gen_3 {
label = "mob2_gen_3";
gpios = <&stm32_io 33 GPIO_ACTIVE_HIGH>;
};
led2_gen_4 {
label = "mob2_gen_4";
gpios = <&stm32_io 34 GPIO_ACTIVE_HIGH>;
};
led_ssid_1 {
label = "mob_ssid_1";
gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_2 {
label = "mob_ssid_2";
gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_3 {
label = "mob_ssid_3";
gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_4 {
label = "mob_ssid_4";
gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_ssid_5 {
label = "mob_ssid_5";
gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_1 {
label = "mob2_ssid_1";
gpios = <&stm32_io 31 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_3 {
label = "mob2_ssid_3";
gpios = <&stm32_io 30 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led2_ssid_5 {
label = "mob2_ssid_5";
gpios = <&stm32_io 29 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "timer";
};
led_wifi_24 {
label = "wifi_gen_2";
gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
};
led_wifi_50 {
label = "wifi_gen_5";
gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
};
};
};
};

View file

@ -0,0 +1,84 @@
#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include <dt-bindings/gpio/gpio.h>
//#include "platform_name.dtsi"
/ {
compatible = "teltonika,rutx", "qcom,ap-dk01.1-c2", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x10000000>;
};
soc {
mdio@90000 {
status = "ok";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
phy-reset-gpio = <&tlmm 62 0>;
ethphy4: ethernet-phy@4 {
qcom,fiber-enable;
};
};
pinctrl@1000000 {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio53";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio52";
function = "mdc";
bias-pull-up;
};
};
};
spi_0: spi@78b5000 {
cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
num-cs = <2>;
mx25l25635f@0 {
compatible = "n25q128a11", "mx25l25635f", "jedec,spi-nor";
#address-cells = <1>;
#size-cells = <1>;
reg = <0>;
spi-max-frequency = <24000000>;
};
mt29f@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spi-nand","spinand,mt29f";
reg = <1>;
spi-max-frequency = <24000000>;
};
};
gpio_keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 4 1>;
linux,code = <0x198>;
};
};
usb3: usb3@8af8800 {
dwc3@8a00000 {
snps,dis_u2_susphy_quirk;
snps,dis_u3_susphy_quirk;
};
};
usb2: usb2@60f8800 {
dwc3@6000000 {
snps,dis_u2_susphy_quirk;
};
};
};
};

View file

@ -0,0 +1,20 @@
/ {
soc {
pinctrl@1000000 {
i2c_0_pins: i2c_0_pinmux {
mux {
pins = "gpio58", "gpio59";
function = "blsp_i2c0";
bias-disable;
};
};
};
i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
clock-frequency = <400000>;
status = "ok";
};
};
};

View file

@ -0,0 +1,25 @@
/ {
io_expander = "shiftreg_1";
soc {
ext_io {
compatible = "spi-gpio";
#address-cells = <1>;
#size-cells = <0>;
gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>; // SRCLK
gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>; // SER
cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; // RCLK
num-chipselects = <1>;
shift_io: shift_io@0 {
compatible = "fairchild,74hc595";
reg = <0>;
gpio-controller;
#gpio-cells = <2>;
registers-number = <3>;
spi-max-frequency = <10000000>;
};
};
};
};

View file

@ -0,0 +1,834 @@
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitzImage
KERNEL_SUFFIX := -fit-zImage.itb
KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := zImage
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
IMAGES := nand-factory.ubi nand-sysupgrade.bin
IMAGE/nand-factory.ubi := append-ubi
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
$(call Device/FitzImage)
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
append-rootfs | pad-rootfs | append-metadata | check-size
endef
define Build/append-rootfshdr
mkimage -A $(LINUX_KARCH) \
-O linux -T filesystem \
-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
endef
define Build/append-rutx-metadata
echo \
'{ \
"device_code": [".*"], \
"hwver": [".*"], \
"batch": [".*"], \
"serial": [".*"], \
"supported_devices":["teltonika,rutx"] \
}' | fwtool -I - $@
endef
define Build/mkmylofw_32m
$(eval device_id=$(word 1,$(1)))
$(eval revision=$(word 2,$(1)))
let \
size="$$(stat -c%s $@)" \
pad="$(subst k,* 1024,$(BLOCKSIZE))" \
pad="(pad - (size % pad)) % pad" \
newsize='size + pad'; \
$(STAGING_DIR_HOST)/bin/mkmylofw \
-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
$@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nand-askey
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
askey_kernel $(IMAGE_KERNEL) \
askey_fs $(IMAGE_ROOTFS) \
ubifs $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/SenaoFW
-$(STAGING_DIR_HOST)/bin/mksenaofw \
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
-e $@ \
-o $@.new
@cp $@.new $@
endef
define Build/wrgg-image
mkwrggimg -i $@ \
-o $@.new \
-d "$(WRGG_DEVNAME)" \
-s "$(WRGG_SIGNATURE)" \
-v "" -m "" -B ""
mv $@.new $@
endef
define Device/8dev_habanero-dvk
$(call Device/FitImageLzma)
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Habanero DVK
IMAGE_SIZE := 30976k
SOC := qcom-ipq4019
DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
endef
TARGET_DEVICES += 8dev_habanero-dvk
define Device/8dev_jalapeno-common
$(call Device/FitImage)
$(call Device/UbiFit)
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := qcom-ipq4018
endef
define Device/8dev_jalapeno
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Jalapeno
endef
TARGET_DEVICES += 8dev_jalapeno
define Device/alfa-network_ap120c-ac
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AP120C-AC
SOC := qcom-ipq4018
DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES := nand-factory.bin nand-sysupgrade.bin
IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += alfa-network_ap120c-ac
define Device/aruba_glenmorangie
$(call Device/FitImageLzma)
DEVICE_VENDOR := Aruba
SOC := qcom-ipq4029
DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
endef
define Device/aruba_ap-303
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-303
endef
TARGET_DEVICES += aruba_ap-303
define Device/aruba_ap-303h
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-303H
endef
TARGET_DEVICES += aruba_ap-303h
define Device/aruba_ap-365
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-365
DEVICE_PACKAGES += kmod-hwmon-ad7418
endef
TARGET_DEVICES += aruba_ap-365
define Device/asus_map-ac2200
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := Lyra (MAP-AC2200)
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
endef
TARGET_DEVICES += asus_map-ac2200
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC58U
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
DTB_SIZE := 65536
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
# version in front of the image name \03\00\00\04 => Version 3.0.0.4
# Since u-boot works with strings we either need another fixup step
# to add a version... or we are very careful not to add '\0' into that
# string and call it a day.... Yeah, we do the latter!
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ac58u
define Device/avm_fritzbox-4040
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 4040
SOC := qcom-ipq4018
BOARD_NAME := fritz4040
IMAGE_SIZE := 29056k
UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
UBOOT_PARTITION_SIZE := 524288
IMAGES += eva.bin
IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := fritz-tffs fritz-caldata
endef
TARGET_DEVICES += avm_fritzbox-4040
define Device/avm_fritzbox-7530
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 7530
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzbox-7530
define Device/avm_fritzrepeater-1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 1200
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
endef
TARGET_DEVICES += avm_fritzrepeater-1200
define Device/avm_fritzrepeater-3000
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 3000
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzrepeater-3000
define Device/buffalo_wtr-m2133hp
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WTR-M2133HP
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += buffalo_wtr-m2133hp
define Device/cellc_rtl30vw
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
KERNEL_NAME := Image
KERNEL_IN_UBI :=
IMAGES := nand-factory.bin nand-sysupgrade.bin
IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
DEVICE_VENDOR := Cell C
DEVICE_MODEL := RTL30VW
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@5
KERNEL_INSTALL := 1
KERNEL_SIZE := 4096k
IMAGE_SIZE := 57344k
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
endef
TARGET_DEVICES += cellc_rtl30vw
define Device/cilab_meshpoint-one
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := Crisis Innovation Lab
DEVICE_MODEL := MeshPoint.One
DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
endef
TARGET_DEVICES += cilab_meshpoint-one
define Device/compex_wpj419
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ419
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@12
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
endef
TARGET_DEVICES += compex_wpj419
define Device/compex_wpj428
$(call Device/FitImage)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ428
SOC := qcom-ipq4028
DEVICE_DTS_CONFIG := config@4
BLOCKSIZE := 64k
IMAGE_SIZE := 31232k
KERNEL_SIZE := 4096k
IMAGES += cpximg-6a04.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
DEVICE_PACKAGES := kmod-gpio-beeper
endef
TARGET_DEVICES += compex_wpj428
define Device/devolo_magic-2-wifi-next
$(call Device/FitImage)
DEVICE_VENDOR := devolo
DEVICE_MODEL := Magic 2 WiFi next
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
# it will bootm it, just like we want for the initramfs.
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next
endef
TARGET_DEVICES += devolo_magic-2-wifi-next
define Device/dlink_dap-2610
$(call Device/FitImageLzma)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-2610
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
BLOCKSIZE := 64k
WRGG_DEVNAME := /dev/mtdblock/8
WRGG_SIGNATURE := wapac30_dkbs_dap2610
IMAGE_SIZE := 14080k
IMAGES += factory.bin
# Bootloader expects a special 160 byte header which is added by
# wrgg-image.
# Factory image size must be larger than 6MB, and size in wrgg header must
# match actual factory image size to be flashable from D-Link http server.
# Bootloader verifies checksum of wrgg image before booting, thus jffs2
# cannot be part of the wrgg image. This is solved in the factory image by
# having the rootfs at the end of the image (without pad-rootfs). And in
# the sysupgrade image only the kernel is included in the wrgg checksum,
# but this is not flashable from the D-link http server.
# append-rootfs must start on an erase block boundary.
IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
endef
TARGET_DEVICES += dlink_dap-2610
define Device/edgecore_ecw5211
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := ECW5211
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
endef
TARGET_DEVICES += edgecore_ecw5211
define Device/edgecore_oap100
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := OAP100
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGES := nand-sysupgrade.bin
DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
endef
TARGET_DEVICES += edgecore_oap100
define Device/engenius_eap1300
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP1300
DEVICE_DTS_CONFIG := config@4
BOARD_NAME := eap1300
SOC := qcom-ipq4018
KERNEL_SIZE := 5120k
IMAGE_SIZE := 25344k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += engenius_eap1300
define Device/engenius_eap2200
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP2200
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += engenius_eap2200
define Device/engenius_emd1
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EMD1
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
IMAGE_SIZE := 30720k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
DEVICE_PACKAGES := ipq-wifi-engenius_emd1
endef
TARGET_DEVICES += engenius_emd1
define Device/engenius_emr3500
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EMR3500
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
IMAGE_SIZE := 30720k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
DEVICE_PACKAGES := ipq-wifi-engenius_emr3500
endef
TARGET_DEVICES += engenius_emr3500
define Device/engenius_ens620ext
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENS620EXT
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@4
BLOCKSIZE := 64k
PAGESIZE := 256
BOARD_NAME := ENS620EXT
VENDOR_ID := 0x0101
PRODUCT_ID := 0x79
PRODUCT_ID_NEW := 0xA4
DATECODE := 190507
FW_VER := 3.1.2
FW_VER_NEW := 3.5.6
CW_VER := 1.8.99
IMAGE_SIZE := 21312k
KERNEL_SIZE := 5120k
FILESYSTEMS := squashfs
IMAGES += factory_30.bin factory_35.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
endef
TARGET_DEVICES += engenius_ens620ext
define Device/ezviz_cs-w3-wd1200g-eup
$(call Device/FitImage)
DEVICE_VENDOR := EZVIZ
DEVICE_MODEL := CS-W3-WD1200G
DEVICE_VARIANT := EUP
DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
SOC := qcom-ipq4018
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
ipq-wifi-ezviz_cs-w3-wd1200g-eup
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
define Device/glinet_gl-ap1300
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-AP1300
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 131072k
KERNEL_INSTALL := 1
DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
endef
TARGET_DEVICES += glinet_gl-ap1300
define Device/glinet_gl-b1300
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-B1300
BOARD_NAME := gl-b1300
SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += glinet_gl-b1300
define Device/glinet_gl-s1300
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-S1300
SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
endef
TARGET_DEVICES += glinet_gl-s1300
define Device/linksys_ea6350v3
# The Linksys EA6350v3 has a uboot bootloader that does not
# support either booting lzma kernel images nor booting UBI
# partitions. This uboot, however, supports raw kernel images and
# gzipped images.
#
# As for the time of writing this, the device will boot the kernel
# from a fixed address with a fixed length of 3MiB. Also, the
# device has a hard-coded kernel command line that requieres the
# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
# Oh... and the kernel partition overlaps with the rootfs
# partition (the same for alt_kernel and alt_rootfs).
#
# If you are planing re-partitioning the device, you may want to
# keep those details in mind:
# 1. The kernel adresses you should honor are 0x00000000 and
# 0x02800000 respectively.
# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
# 4. The kernel command line from uboot is harcoded to boot with
# rootfs either in mtd11 or mtd13.
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v3
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 3072k
IMAGE_SIZE := 37888k
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
endef
TARGET_DEVICES += linksys_ea6350v3
define Device/linksys_ea8300
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA8300
SOC := qcom-ipq4019
KERNEL_SIZE := 3072k
IMAGE_SIZE := 87040k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_ea8300
define Device/linksys_mr8300
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := MR8300
SOC := qcom-ipq4019
KERNEL_SIZE := 3072k
IMAGE_SIZE := 87040k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr8300
define Device/luma_wrtq-329acn
$(call Device/FitImage)
DEVICE_VENDOR := Luma Home
DEVICE_MODEL := WRTQ-329ACN
SOC := qcom-ipq4018
DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
IMAGE_SIZE := 76632k
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += luma_wrtq-329acn
define Device/meraki_mr33
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
DEVICE_MODEL := MR33
SOC := qcom-ipq4029
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
endef
TARGET_DEVICES += meraki_mr33
define Device/mobipromo_cm520-79f
$(call Device/FitzImage)
$(call Device/UbiFit)
DEVICE_VENDOR := MobiPromo
DEVICE_MODEL := CM520-79F
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += mobipromo_cm520-79f
define Device/netgear_ex61x0v2
$(call Device/DniImage)
DEVICE_VENDOR := NETGEAR
DEVICE_DTS_CONFIG := config@4
NETGEAR_BOARD_ID := EX6150v2series
NETGEAR_HW_ID := 29765285+16+0+128+2x2
IMAGE_SIZE := 14400k
SOC := qcom-ipq4018
endef
define Device/netgear_ex6100v2
$(call Device/netgear_ex61x0v2)
DEVICE_MODEL := EX6100
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6100v2
define Device/netgear_ex6150v2
$(call Device/netgear_ex61x0v2)
DEVICE_MODEL := EX6150
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6150v2
define Device/openmesh_a42
$(call Device/FitImageLzma)
DEVICE_VENDOR := OpenMesh
DEVICE_MODEL := A42
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@om.a42
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
endef
TARGET_DEVICES += openmesh_a42
define Device/openmesh_a62
$(call Device/FitImageLzma)
DEVICE_VENDOR := OpenMesh
DEVICE_MODEL := A62
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@om.a62
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
endef
TARGET_DEVICES += openmesh_a62
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
DEVICE_MODEL := PA1200
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@pc.pa1200
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ipq-wifi-plasmacloud_pa1200
endef
TARGET_DEVICES += plasmacloud_pa1200
define Device/plasmacloud_pa2200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
DEVICE_MODEL := PA2200
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@pc.pa2200
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud_pa2200
endef
TARGET_DEVICES += plasmacloud_pa2200
define Device/qcom_ap-dk01.1-c1
DEVICE_VENDOR := Qualcomm Atheros
DEVICE_MODEL := AP-DK01.1
DEVICE_VARIANT := C1
BOARD_NAME := ap-dk01.1-c1
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
$(call Device/FitImage)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += qcom_ap-dk01.1-c1
define Device/qcom_ap-dk04.1-c1
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Qualcomm Atheros
DEVICE_MODEL := AP-DK04.1
DEVICE_VARIANT := C1
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4048k
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap-dk04.1-c1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E2600AC
DEVICE_VARIANT := C1
BOARD_NAME := e2600ac-c1
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c1
define Device/qxwlan_e2600ac-c2
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E2600AC
DEVICE_VARIANT := C2
SOC := qcom-ipq4019
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
define Device/teltonika_rutx10
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Teltonika
DEVICE_MODEL := RUTX10
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@5
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
IMAGE/nand-factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
DEVICE_PACKAGES := kmod-bluetooth
# DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth
endef
TARGET_DEVICES += teltonika_rutx10
define Device/unielec_u4019-32m
$(call Device/FitImage)
DEVICE_VENDOR := Unielec
DEVICE_MODEL := U4019
DEVICE_VARIANT := 32M
BOARD_NAME := u4019-32m
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += unielec_u4019-32m
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NBG6617
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
ROOTFS_SIZE := 24960k
RAS_BOARD := NBG6617
RAS_ROOTFS_SIZE := 19840k
RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGES += factory.bin
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
# at least as large as the one of the initial firmware image (not the current
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
# this minimum-size. However, the larger image can be flashed both ways.
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += zyxel_nbg6617
define Device/zyxel_wre6606
$(call Device/FitImage)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WRE6606
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
IMAGE_SIZE := 13184k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += zyxel_wre6606

View file

@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -837,11 +837,52 @@ dtb-$(CONFIG_ARCH_QCOM) += \
@@ -837,11 +837,55 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
@ -30,6 +30,9 @@ Signed-off-by: John Crispin <john@phrozen.org>
+ qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-nbg6617.dtb \
+ qcom-ipq4018-rt-ac58u.dtb \
+ qcom-ipq4018-rutx-08_10.dtb \
+ qcom-ipq4018-rutx-09_11.dtb \
+ qcom-ipq4018-rutx-12.dtb \
+ qcom-ipq4018-wre6606.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \