mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
Update 950-0785-ARM-dts-Add-bcm2711-rpi-cm4.dts.patch
This commit is contained in:
suyuan168
parent
3e32a4fc4b
commit
2e1a48e6d7
1 changed files with 515 additions and 75 deletions
|
|
@ -8,9 +8,9 @@ Add initial DTS file for Compute Module 4.
|
|||
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
||||
---
|
||||
arch/arm/boot/dts/Makefile | 3 +-
|
||||
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 586 ++++++++++++++++++++++++++
|
||||
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 486 ++++++++++++++++++++++++++
|
||||
arch/arm/boot/dts/overlays/README | 6 +
|
||||
3 files changed, 594 insertions(+), 1 deletion(-)
|
||||
3 files changed, 492 insertions(+), 1 deletion(-)
|
||||
create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
||||
|
||||
--- a/arch/arm/boot/dts/Makefile
|
||||
|
|
@ -27,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
alpine-db.dtb
|
||||
--- /dev/null
|
||||
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
|
||||
@@ -0,0 +1,536 @@
|
||||
@@ -0,0 +1,486 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0
|
||||
+/dts-v1/;
|
||||
+#include "bcm2711.dtsi"
|
||||
|
|
@ -49,7 +49,9 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ emmc2bus = &emmc2bus;
|
||||
+ ethernet0 = &genet;
|
||||
+ pcie0 = &pcie0;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
|
|
@ -60,6 +62,8 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ pwr {
|
||||
+ label = "PWR";
|
||||
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
+ default-state = "keep";
|
||||
+ linux,default-trigger = "default-on";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
|
|
@ -173,50 +177,11 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+};
|
||||
+
|
||||
+&vc4 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve2 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve4 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ddc0 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&hdmi1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&ddc1 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+// =============================================
|
||||
+// Downstream rpi- changes
|
||||
+
|
||||
+#include "bcm270x.dtsi"
|
||||
+#include "bcm271x-rpi-bt.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ soc {
|
||||
|
|
@ -226,14 +191,13 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+};
|
||||
+
|
||||
+#include "bcm2711-rpi.dtsi"
|
||||
+#include "bcm283x-rpi-csi1-2lane.dtsi"
|
||||
+#include "bcm283x-rpi-csi0-2lane.dtsi"
|
||||
+#include "bcm283x-rpi-csi1-4lane.dtsi"
|
||||
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
||||
+
|
||||
+/delete-node/ &emmc2;
|
||||
+
|
||||
+/ {
|
||||
+ chosen {
|
||||
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1";
|
||||
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
|
|
@ -247,34 +211,16 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ i2c4 = &i2c4;
|
||||
+ i2c5 = &i2c5;
|
||||
+ i2c6 = &i2c6;
|
||||
+ /delete-property/ ethernet;
|
||||
+ /delete-property/ intc;
|
||||
+ pcie0 = &pcie0;
|
||||
+ emmc2bus = &emmc2bus;
|
||||
+ };
|
||||
+
|
||||
+ emmc2bus: emmc2bus {
|
||||
+ compatible = "simple-bus";
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <1>;
|
||||
+
|
||||
+ ranges = <0x0 0x7e000000 0x0 0xfe000000 0x01800000>;
|
||||
+ dma-ranges = <0x0 0xc0000000 0x0 0x00000000 0x40000000>;
|
||||
+
|
||||
+ emmc2: emmc2@7e340000 {
|
||||
+ compatible = "brcm,bcm2711-emmc2";
|
||||
+ status = "okay";
|
||||
+ interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&clocks BCM2711_CLOCK_EMMC2>;
|
||||
+ reg = <0x0 0x7e340000 0x100>;
|
||||
+ vqmmc-supply = <&sd_io_1v8_reg>;
|
||||
+ broken-cd;
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ /delete-node/ wifi-pwrseq;
|
||||
+};
|
||||
+
|
||||
+&pcie0 {
|
||||
+ brcm,enable-l1ss;
|
||||
+};
|
||||
+
|
||||
+&mmcnr {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdio_pins>;
|
||||
|
|
@ -285,8 +231,6 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+&uart0 {
|
||||
+ pinctrl-0 = <&uart0_pins &bt_pins>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ /delete-node/ bluetooth;
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
|
|
@ -374,6 +318,10 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ clock-frequency = <100000>;
|
||||
+};
|
||||
+
|
||||
+&firmwarekms {
|
||||
+ compatible = "raspberrypi,rpi-firmware-kms-2711";
|
||||
+};
|
||||
+
|
||||
+// =============================================
|
||||
+// Board specific stuff here
|
||||
+
|
||||
|
|
@ -385,10 +333,10 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+
|
||||
+&sdhost {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
|
|
@ -404,8 +352,8 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+
|
||||
+&gpio {
|
||||
+ audio_pins: audio_pins {
|
||||
+ brcm,pins = <40 41>;
|
||||
+ brcm,function = <4>;
|
||||
+ brcm,pins = <>;
|
||||
+ brcm,function = <>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
|
|
@ -425,7 +373,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ wlan2g {
|
||||
+ label = "wlan2g";
|
||||
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+ };6
|
||||
+
|
||||
+ wlan5g {
|
||||
+ label = "wlan5g";
|
||||
|
|
@ -505,6 +453,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+&audio {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&audio_pins>;
|
||||
+ brcm,disable-headphones = <1>;
|
||||
+};
|
||||
+
|
||||
+&vc4 {
|
||||
|
|
@ -560,6 +509,497 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|||
+ eth_led0 = <&phy1>,"led-modes:0";
|
||||
+ eth_led1 = <&phy1>,"led-modes:4";
|
||||
+
|
||||
+ sd_poll_once = <&emmc2>, "non-removable?";
|
||||
+ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
|
||||
+ <&spi0>, "dmas:8=", <&dma40>;
|
||||
+ };
|
||||
+};
|
||||
diff -Naur linux-5.4.194/scripts/dtc/include-prefixes/arm/bcm2711-rpi-cm4.dts linux-5.4.1942/scripts/dtc/include-prefixes/arm/bcm2711-rpi-cm4.dts
|
||||
--- linux-5.4.194/scripts/dtc/include-prefixes/arm/bcm2711-rpi-cm4.dts 1970-01-01 08:00:00.000000000 +0800
|
||||
+++ linux-5.4.1942/scripts/dtc/include-prefixes/arm/bcm2711-rpi-cm4.dts 2022-06-08 15:31:59.330572000 +0800
|
||||
@@ -0,0 +1,486 @@
|
||||
+// SPDX-License-Identifier: GPL-2.0
|
||||
+/dts-v1/;
|
||||
+#include "bcm2711.dtsi"
|
||||
+#include "bcm2835-rpi.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
|
||||
+ model = "openmptcprouter5G_M4";
|
||||
+
|
||||
+ chosen {
|
||||
+ /* 8250 auxiliary UART instead of pl011 */
|
||||
+ stdout-path = "serial1:115200n8";
|
||||
+ };
|
||||
+
|
||||
+ /* Will be filled by the bootloader */
|
||||
+ memory@0 {
|
||||
+ device_type = "memory";
|
||||
+ reg = <0 0 0>;
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ emmc2bus = &emmc2bus;
|
||||
+ ethernet0 = &genet;
|
||||
+ pcie0 = &pcie0;
|
||||
+ };
|
||||
+
|
||||
+ leds {
|
||||
+ act {
|
||||
+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ pwr {
|
||||
+ label = "PWR";
|
||||
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
+ default-state = "keep";
|
||||
+ linux,default-trigger = "default-on";
|
||||
+ };
|
||||
+ };
|
||||
+
|
||||
+ wifi_pwrseq: wifi-pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ sd_io_1v8_reg: sd_io_1v8_reg {
|
||||
+ compatible = "regulator-gpio";
|
||||
+ regulator-name = "vdd-sd-io";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-boot-on;
|
||||
+ regulator-always-on;
|
||||
+ regulator-settling-time-us = <5000>;
|
||||
+ gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
|
||||
+ states = <1800000 0x1
|
||||
+ 3300000 0x0>;
|
||||
+ status = "okay";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&firmware {
|
||||
+ expgpio: gpio {
|
||||
+ compatible = "raspberrypi,firmware-gpio";
|
||||
+ gpio-controller;
|
||||
+ #gpio-cells = <2>;
|
||||
+ gpio-line-names = "BT_ON",
|
||||
+ "WL_ON",
|
||||
+ "PWR_LED_OFF",
|
||||
+ "VDD_SD_IO_SEL",
|
||||
+ "CAM_GPIO",
|
||||
+ "SD_PWR_ON",
|
||||
+ "ANT2";
|
||||
+ status = "okay";
|
||||
+
|
||||
+ ant2: ant2 {
|
||||
+ gpio-hog;
|
||||
+ gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||
+ output-low;
|
||||
+ };
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pwm1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+/* SDHCI is used to control the SDIO for wireless */
|
||||
+&sdhci {
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&emmc_gpio34>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ brcmf: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* EMMC2 is used to drive the SD card */
|
||||
+&emmc2 {
|
||||
+ vqmmc-supply = <&sd_io_1v8_reg>;
|
||||
+ broken-cd;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&genet {
|
||||
+ phy-handle = <&phy1>;
|
||||
+ phy-mode = "rgmii-rxid";
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&genet_mdio {
|
||||
+ phy1: ethernet-phy@1 {
|
||||
+ /* No PHY interrupt */
|
||||
+ reg = <0x1>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* uart0 communicates with the BT module */
|
||||
+&uart0 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
|
||||
+ uart-has-rtscts;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ bluetooth {
|
||||
+ compatible = "brcm,bcm43438-bt";
|
||||
+ max-speed = <2000000>;
|
||||
+ shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+/* uart1 is mapped to the pin header */
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1_gpio14>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&vchiq {
|
||||
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+};
|
||||
+
|
||||
+// =============================================
|
||||
+// Downstream rpi- changes
|
||||
+
|
||||
+#include "bcm270x.dtsi"
|
||||
+#include "bcm271x-rpi-bt.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ soc {
|
||||
+ /delete-node/ pixelvalve@7e807000;
|
||||
+ /delete-node/ hdmi@7e902000;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+#include "bcm2711-rpi.dtsi"
|
||||
+#include "bcm283x-rpi-csi0-2lane.dtsi"
|
||||
+#include "bcm283x-rpi-csi1-4lane.dtsi"
|
||||
+#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
||||
+
|
||||
+/ {
|
||||
+ chosen {
|
||||
+ bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
|
||||
+ };
|
||||
+
|
||||
+ aliases {
|
||||
+ serial0 = &uart1;
|
||||
+ serial1 = &uart0;
|
||||
+ mmc0 = &emmc2;
|
||||
+ mmc1 = &mmcnr;
|
||||
+ mmc2 = &sdhost;
|
||||
+ /delete-property/ i2c2;
|
||||
+ i2c3 = &i2c3;
|
||||
+ i2c4 = &i2c4;
|
||||
+ i2c5 = &i2c5;
|
||||
+ i2c6 = &i2c6;
|
||||
+ /delete-property/ intc;
|
||||
+ };
|
||||
+
|
||||
+ /delete-node/ wifi-pwrseq;
|
||||
+};
|
||||
+
|
||||
+&pcie0 {
|
||||
+ brcm,enable-l1ss;
|
||||
+};
|
||||
+
|
||||
+&mmcnr {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&sdio_pins>;
|
||||
+ bus-width = <4>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart0 {
|
||||
+ pinctrl-0 = <&uart0_pins &bt_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-0 = <&uart1_pins>;
|
||||
+};
|
||||
+
|
||||
+&gpio {
|
||||
+ spi0_cs_pins: spi0_cs_pins {
|
||||
+ brcm,pins = <8 7>;
|
||||
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
+ };
|
||||
+
|
||||
+ spi3_pins: spi3_pins {
|
||||
+ brcm,pins = <1 2>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
+ };
|
||||
+
|
||||
+ spi4_pins: spi4_pins {
|
||||
+ brcm,pins = <5 7>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
+ };
|
||||
+
|
||||
+ spi4_cs_pins: spi4_cs_pins {
|
||||
+ brcm,pins = <4 25>;
|
||||
+ brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
+ };
|
||||
+
|
||||
+ i2c0_pins: i2c0 {
|
||||
+ brcm,pins = <0 1>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
+ brcm,pull = <BCM2835_PUD_UP>;
|
||||
+ };
|
||||
+
|
||||
+ i2c4_pins: i2c4 {
|
||||
+ brcm,pins = <8>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
+ brcm,pull = <BCM2835_PUD_UP>;
|
||||
+ };
|
||||
+
|
||||
+ sdio_pins: sdio_pins {
|
||||
+ brcm,pins = <34 35 36 37 38 39>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
|
||||
+ brcm,pull = <0 2 2 2 2 2>;
|
||||
+ };
|
||||
+
|
||||
+ bt_pins: bt_pins {
|
||||
+ brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
|
||||
+ // to fool pinctrl
|
||||
+ brcm,function = <0>;
|
||||
+ brcm,pull = <2>;
|
||||
+ };
|
||||
+
|
||||
+ uart0_pins: uart0_pins {
|
||||
+ brcm,pins = <32 33>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
+ brcm,pull = <0 2>;
|
||||
+ };
|
||||
+
|
||||
+ uart1_pins: uart1_pins {
|
||||
+ brcm,pins;
|
||||
+ brcm,function;
|
||||
+ brcm,pull;
|
||||
+ };
|
||||
+
|
||||
+ uart2_pins: uart2_pins {
|
||||
+ brcm,pins = <0 1>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
+ brcm,pull = <0 2>;
|
||||
+ };
|
||||
+
|
||||
+ uart3_pins: uart3_pins {
|
||||
+ brcm,pins = <4 5>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
+ brcm,pull = <0 2>;
|
||||
+ };
|
||||
+
|
||||
+ uart4_pins: uart4_pins {
|
||||
+ brcm,pins = <8>;
|
||||
+ brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
+ brcm,pull = <0 2>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&i2c0if {
|
||||
+ clock-frequency = <100000>;
|
||||
+};
|
||||
+
|
||||
+&firmwarekms {
|
||||
+ compatible = "raspberrypi,rpi-firmware-kms-2711";
|
||||
+};
|
||||
+
|
||||
+// =============================================
|
||||
+// Board specific stuff here
|
||||
+
|
||||
+/ {
|
||||
+ sd_vcc_reg: sd_vcc_reg {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ regulator-name = "vcc-sd";
|
||||
+ regulator-min-microvolt = <3300000>;
|
||||
+ regulator-max-microvolt = <3300000>;
|
||||
+ regulator-boot-on;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+
|
||||
+&sdhost {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&emmc2 {
|
||||
+ vmmc-supply = <&sd_vcc_reg>;
|
||||
+ bus-width = <8>;
|
||||
+};
|
||||
+
|
||||
+&phy1 {
|
||||
+ led-modes = <0x00 0x08>; /* link/activity link */
|
||||
+};
|
||||
+
|
||||
+&gpio {
|
||||
+ audio_pins: audio_pins {
|
||||
+ brcm,pins = <>;
|
||||
+ brcm,function = <>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&leds {
|
||||
+ act_led: act {
|
||||
+ label = "led0";
|
||||
+ linux,default-trigger = "mmc0";
|
||||
+ gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ pwr_led: pwr {
|
||||
+ label = "led1";
|
||||
+ linux,default-trigger = "default-on";
|
||||
+ gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
+ };
|
||||
+
|
||||
+ wlan2g {
|
||||
+ label = "wlan2g";
|
||||
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
||||
+ };6
|
||||
+
|
||||
+ wlan5g {
|
||||
+ label = "wlan5g";
|
||||
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "wan";
|
||||
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g1 {
|
||||
+ label = "5g1";
|
||||
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g2 {
|
||||
+ label = "5g2";
|
||||
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g3 {
|
||||
+ label = "5g3";
|
||||
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g4 {
|
||||
+ label = "5g4";
|
||||
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g5 {
|
||||
+ label = "5g5";
|
||||
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g6 {
|
||||
+ label = "5g6";
|
||||
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr1 {
|
||||
+ label = "5gpwr1";
|
||||
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr2 {
|
||||
+ label = "5gpwr2";
|
||||
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr3 {
|
||||
+ label = "5gpwr3";
|
||||
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr4 {
|
||||
+ label = "5gpwr4";
|
||||
+ gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr5 {
|
||||
+ label = "5gpwr5";
|
||||
+ gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr6 {
|
||||
+ label = "5gpwr6";
|
||||
+ gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&pwm1 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&audio {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&audio_pins>;
|
||||
+ brcm,disable-headphones = <1>;
|
||||
+};
|
||||
+
|
||||
+&vc4 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve0 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve1 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve2 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve3 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&pixelvalve4 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&hdmi0 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&ddc0 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&hdmi1 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+&ddc1 {
|
||||
+ status = "disabled";
|
||||
+};
|
||||
+
|
||||
+/ {
|
||||
+ __overrides__ {
|
||||
+ act_led_gpio = <&act_led>,"gpios:4";
|
||||
+ act_led_activelow = <&act_led>,"gpios:8";
|
||||
+ act_led_trigger = <&act_led>,"linux,default-trigger";
|
||||
+
|
||||
+ pwr_led_gpio = <&pwr_led>,"gpios:4";
|
||||
+ pwr_led_activelow = <&pwr_led>,"gpios:8";
|
||||
+ pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
|
||||
+
|
||||
+ eth_led0 = <&phy1>,"led-modes:0";
|
||||
+ eth_led1 = <&phy1>,"led-modes:4";
|
||||
+
|
||||
+ sd_poll_once = <&emmc2>, "non-removable?";
|
||||
+ spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
|
||||
+ <&spi0>, "dmas:8=", <&dma40>;
|
||||
+ };
|
||||
|
|
|
|||
Loading…
Add table
Add a link
Reference in a new issue