diff --git a/6.1/target/linux/mediatek/dts/mt7981b-zbt-z8102ax.dts b/6.1/target/linux/mediatek/dts/mt7981b-zbt-z8102ax.dts
new file mode 100644
index 00000000..29193c9f
--- /dev/null
+++ b/6.1/target/linux/mediatek/dts/mt7981b-zbt-z8102ax.dts
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "mt7981.dtsi"
+
+/ {
+	model = "ZBT Z8102AX";
+	compatible = "z8102ax", "mediatek,mt7981";
+
+	aliases {
+		serial0 = &uart0;
+		led-boot = &led_status_red;
+		led-failsafe = &led_status_red;
+		led-running = &led_status_green;
+		led-upgrade = &led_status_green;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&pio 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wps {
+			label = "wps";
+			linux,code = <KEY_WPS_BUTTON>;
+			gpios = <&pio 0 GPIO_ACTIVE_LOW>;
+		};
+		
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: red {
+			label = "red:status";
+			gpios = <&pio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		led_status_green: green {
+			label = "green:status";
+			gpios = <&pio 10 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_status_blue: blue {
+			label = "blue:status";
+			gpios = <&pio 11 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_status_4g: 4g {
+			label = "4g:status";
+			gpios = <&pio 8 GPIO_ACTIVE_LOW>;
+		};
+		
+		led_status_4g2: 4g2 {
+			label = "4g2:status";
+			gpios = <&pio 13 GPIO_ACTIVE_LOW>;
+		};
+
+	};
+	
+	usb_vbus: regulator-usb-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-boot-on;
+	};
+};
+
+&eth {
+	status = "okay";
+
+	gmac0: mac@0 {
+		compatible = "mediatek,eth-mac";
+		reg = <0>;
+		phy-mode = "2500base-x";
+		nvmem-cell-names = "mac-address";
+		nvmem-cells = <&macaddr_factory_004>;
+
+		fixed-link {
+			speed = <2500>;
+			full-duplex;
+			pause;
+		};
+	};
+	
+	gmac1: mac@1 {
+		compatible = "mediatek,eth-mac";
+		reg = <1>;
+		phy-mode = "gmii";
+		phy-handle = <&int_gbe_phy>;
+	};
+};
+
+&mdio_bus {
+	switch: switch@0 {
+		compatible = "mediatek,mt7531";
+		reg = <31>;
+		reset-gpios = <&pio 39 GPIO_ACTIVE_HIGH>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_flash_pins>;
+	status = "okay";
+
+	spi_nand@0 {
+		compatible = "spi-nand";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+
+		spi-max-frequency = <52000000>;
+		spi-tx-buswidth = <4>;
+		spi-rx-buswidth = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "bl2";
+				reg = <0x0000000 0x0100000>;
+				read-only;
+			};
+
+			partition@100000 {
+				label = "u-boot-env";
+				reg = <0x0100000 0x0080000>;
+			};
+
+			factory: partition@180000 {
+				label = "Factory";
+				reg = <0x0180000 0x0200000>;
+				read-only;
+			};
+
+			partition@380000 {
+				label = "fip";
+				reg = <0x0380000 0x0200000>;
+				read-only;
+			};
+
+			partition@580000 {
+				label = "ubi";
+				reg = <0x0580000 0x4000000>;
+			};
+		};
+	};
+};
+
+&switch {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			label = "lan1";
+			nvmem-cell-names = "mac-address";
+			nvmem-cells = <&macaddr_factory_004>;
+			mac-address-increment = <2>;
+		};
+
+		port@1 {
+			reg = <1>;
+			label = "lan2";
+			nvmem-cell-names = "mac-address";
+			nvmem-cells = <&macaddr_factory_004>;
+			mac-address-increment = <2>;
+		};
+
+		port@2 {
+			reg = <2>;
+			label = "lan3";
+			nvmem-cell-names = "mac-address";
+			nvmem-cells = <&macaddr_factory_004>;
+			mac-address-increment = <2>;
+		};
+
+		port@3 {
+			reg = <3>;
+			label = "lan4";
+			nvmem-cell-names = "mac-address";
+			nvmem-cells = <&macaddr_factory_004>;
+			mac-address-increment = <2>;
+		};
+
+		port@6 {
+			reg = <6>;
+			ethernet = <&gmac0>;
+			phy-mode = "2500base-x";
+
+			fixed-link {
+				speed = <2500>;
+				full-duplex;
+				pause;
+			};
+		};
+	};
+};
+
+&pio {
+	spi0_flash_pins: spi0-pins {
+		mux {
+			function = "spi";
+			groups = "spi0", "spi0_wp_hold";
+		};
+
+		conf-pu {
+			pins = "SPI0_CS", "SPI0_HOLD", "SPI0_WP";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+
+		conf-pd {
+			pins = "SPI0_CLK", "SPI0_MOSI", "SPI0_MISO";
+			drive-strength = <8>;
+			mediatek,pull-up-adv = <0>; /* bias-disable */
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	mediatek,mtd-eeprom = <&factory 0x0>;
+};
+
+&usb_phy {
+	status = "okay";
+};
+
+&xhci {
+	vbus-supply = <&usb_vbus>;
+
+	status = "okay";
+};
+
+&factory {
+	compatible = "nvmem-cells";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	macaddr_factory_004: macaddr@004 {
+		reg = <0x004 0x6>;
+	};
+};
\ No newline at end of file
diff --git a/6.1/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds b/6.1/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
new file mode 100644
index 00000000..83194ec6
--- /dev/null
+++ b/6.1/target/linux/mediatek/filogic/base-files/etc/board.d/01_leds
@@ -0,0 +1,40 @@
+. /lib/functions/leds.sh
+. /lib/functions/uci-defaults.sh
+
+board=$(board_name)
+
+board_config_update
+
+case $board in
+cudy,wr3000-v1)
+	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan"
+	;;
+mercusys,mr90x-v1)
+	ucidef_set_led_netdev "lan0" "lan0" "green:lan0" "lan0" "link tx rx"
+	ucidef_set_led_netdev "lan1" "lan2" "green:lan1" "lan1" "link tx rx"
+	ucidef_set_led_netdev "lan2" "lan2" "green:lan2" "lan2" "link tx rx"
+	ucidef_set_led_netdev "wan" "wan" "green:wan" "eth1" "link tx rx"
+	;;
+netgear,wax220)
+	ucidef_set_led_netdev "eth0" "LAN" "green:lan" "eth0"
+	ucidef_set_led_netdev "wlan2g" "WLAN2G" "blue:wlan2g" "phy0-ap0"
+	ucidef_set_led_netdev "wlan5g" "WLAN5G" "blue:wlan5g" "phy1-ap0"
+	;;
+xiaomi,mi-router-wr30u-112m-nmbm|\
+xiaomi,mi-router-wr30u-stock|\
+xiaomi,mi-router-wr30u-ubootmod)
+	ucidef_set_led_netdev "wan" "wan" "blue:network" "wan"
+	;;
+xiaomi,redmi-router-ax6000-stock|\
+xiaomi,redmi-router-ax6000-ubootmod)
+	ucidef_set_led_netdev "wan" "wan" "rgb:network" "wan"
+	;;
+z8102axx)
+	ucidef_set_led_netdev "4g" "4g" "4g:status" "wwan0"
+	ucidef_set_led_netdev "4g2" "4g2" "4g2:status" "wwan1"
+	;;
+esac
+
+board_config_flush
+
+exit 0
diff --git a/6.1/target/linux/mediatek/image/filogic.mk b/6.1/target/linux/mediatek/image/filogic.mk
new file mode 100644
index 00000000..97d08ea7
--- /dev/null
+++ b/6.1/target/linux/mediatek/image/filogic.mk
@@ -0,0 +1,711 @@
+DTS_DIR := $(DTS_DIR)/mediatek
+
+define Image/Prepare
+	# For UBI we want only one extra block
+	rm -f $(KDIR)/ubi_mark
+	echo -ne '\xde\xad\xc0\xde' > $(KDIR)/ubi_mark
+endef
+
+define Build/mt7981-bl2
+	cat $(STAGING_DIR_IMAGE)/mt7981-$1-bl2.img >> $@
+endef
+
+define Build/mt7981-bl31-uboot
+	cat $(STAGING_DIR_IMAGE)/mt7981_$1-u-boot.fip >> $@
+endef
+
+define Build/mt7986-bl2
+	cat $(STAGING_DIR_IMAGE)/mt7986-$1-bl2.img >> $@
+endef
+
+define Build/mt7986-bl31-uboot
+	cat $(STAGING_DIR_IMAGE)/mt7986_$1-u-boot.fip >> $@
+endef
+
+define Build/mt7988-bl2
+	cat $(STAGING_DIR_IMAGE)/mt7988-$1-bl2.img >> $@
+endef
+
+define Build/mt7988-bl31-uboot
+	cat $(STAGING_DIR_IMAGE)/mt7988_$1-u-boot.fip >> $@
+endef
+
+define Build/mt798x-gpt
+	cp $@ $@.tmp 2>/dev/null || true
+	ptgen -g -o $@.tmp -a 1 -l 1024 \
+		$(if $(findstring sdmmc,$1), \
+			-H \
+			-t 0x83	-N bl2		-r	-p 4079k@17k \
+		) \
+			-t 0x83	-N ubootenv	-r	-p 512k@4M \
+			-t 0x83	-N factory	-r	-p 2M@4608k \
+			-t 0xef	-N fip		-r	-p 4M@6656k \
+				-N recovery	-r	-p 32M@12M \
+		$(if $(findstring sdmmc,$1), \
+				-N install	-r	-p 20M@44M \
+			-t 0x2e -N production		-p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
+		) \
+		$(if $(findstring emmc,$1), \
+			-t 0x2e -N production		-p $(CONFIG_TARGET_ROOTFS_PARTSIZE)M@64M \
+		)
+	cat $@.tmp >> $@
+	rm $@.tmp
+endef
+
+metadata_gl_json = \
+	'{ $(if $(IMAGE_METADATA),$(IMAGE_METADATA)$(comma)) \
+		"metadata_version": "1.1", \
+		"compat_version": "$(call json_quote,$(compat_version))", \
+		$(if $(DEVICE_COMPAT_MESSAGE),"compat_message": "$(call json_quote,$(DEVICE_COMPAT_MESSAGE))"$(comma)) \
+		$(if $(filter-out 1.0,$(compat_version)),"new_supported_devices": \
+			[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma) \
+			"supported_devices": ["$(call json_quote,$(legacy_supported_message))"]$(comma)) \
+		$(if $(filter 1.0,$(compat_version)),"supported_devices":[$(call metadata_devices,$(SUPPORTED_DEVICES))]$(comma)) \
+		"version": { \
+			"release": "$(call json_quote,$(VERSION_NUMBER))", \
+			"date": "$(shell TZ='Asia/Chongqing' date '+%Y%m%d%H%M%S')", \
+			"dist": "$(call json_quote,$(VERSION_DIST))", \
+			"version": "$(call json_quote,$(VERSION_NUMBER))", \
+			"revision": "$(call json_quote,$(REVISION))", \
+			"target": "$(call json_quote,$(TARGETID))", \
+			"board": "$(call json_quote,$(if $(BOARD_NAME),$(BOARD_NAME),$(DEVICE_NAME)))" \
+		} \
+	}'
+
+define Build/append-gl-metadata
+	$(if $(SUPPORTED_DEVICES),-echo $(call metadata_gl_json,$(SUPPORTED_DEVICES)) | fwtool -I - $@)
+	sha256sum "$@" | cut -d" " -f1 > "$@.sha256sum"
+	[ ! -s "$(BUILD_KEY)" -o ! -s "$(BUILD_KEY).ucert" -o ! -s "$@" ] || { \
+		cp "$(BUILD_KEY).ucert" "$@.ucert" ;\
+		usign -S -m "$@" -s "$(BUILD_KEY)" -x "$@.sig" ;\
+		ucert -A -c "$@.ucert" -x "$@.sig" ;\
+		fwtool -S "$@.ucert" "$@" ;\
+	}
+endef
+
+define Build/zyxel-nwa-fit-filogic
+	$(TOPDIR)/scripts/mkits-zyxel-fit-filogic.sh \
+		$@.its $@ "80 e1 ff ff ff ff ff ff ff ff"
+	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+	@mv $@.new $@
+endef
+
+define Build/cetron-header
+	$(eval magic=$(word 1,$(1)))
+	$(eval model=$(word 2,$(1)))
+	( \
+		dd if=/dev/zero bs=856 count=1 2>/dev/null; \
+		printf "$(model)," | dd bs=128 count=1 conv=sync 2>/dev/null; \
+		md5sum $@ | cut -f1 -d" " | dd bs=32 count=1 2>/dev/null; \
+		printf "$(magic)" | dd bs=4 count=1 conv=sync 2>/dev/null; \
+		cat $@; \
+	) > $@.tmp
+	fw_crc=$$(gzip -c $@.tmp | tail -c 8 | od -An -N4 -tx4 --endian little | tr -d ' \n'); \
+	printf "$$(echo $$fw_crc | sed 's/../\\x&/g')" | cat - $@.tmp > $@
+	rm $@.tmp
+endef
+
+define Device/asus_tuf-ax4200
+  DEVICE_VENDOR := ASUS
+  DEVICE_MODEL := TUF-AX4200
+  DEVICE_DTS := mt7986a-asus-tuf-ax4200
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += asus_tuf-ax4200
+
+define Device/acer_predator-w6
+  DEVICE_VENDOR := Acer
+  DEVICE_MODEL := Predator W6
+  DEVICE_DTS := mt7986a-acer-predator-w6
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware kmod-mt7916-firmware mt7986-wo-firmware e2fsprogs f2fsck mkf2fs
+  IMAGES := sysupgrade.bin
+  KERNEL := kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += acer_predator-w6
+
+define Device/bananapi_bpi-r3
+  DEVICE_VENDOR := Bananapi
+  DEVICE_MODEL := BPi-R3
+  DEVICE_DTS := mt7986a-bananapi-bpi-r3
+  DEVICE_DTS_CONFIG := config-mt7986a-bananapi-bpi-r3
+  DEVICE_DTS_OVERLAY:= mt7986a-bananapi-bpi-r3-emmc mt7986a-bananapi-bpi-r3-nand mt7986a-bananapi-bpi-r3-nor mt7986a-bananapi-bpi-r3-sd
+  DEVICE_DTS_DIR := $(DTS_DIR)/
+  DEVICE_DTS_LOADADDR := 0x43f00000
+  DEVICE_PACKAGES := kmod-hwmon-pwmfan kmod-i2c-gpio kmod-mt7986-firmware kmod-sfp kmod-usb3 e2fsprogs f2fsck mkf2fs mt7986-wo-firmware
+  IMAGES := sysupgrade.itb
+  KERNEL_LOADADDR := 0x44000000
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  ARTIFACTS := \
+	       emmc-preloader.bin emmc-bl31-uboot.fip \
+	       nor-preloader.bin nor-bl31-uboot.fip \
+	       sdcard.img.gz \
+	       snand-preloader.bin snand-bl31-uboot.fip
+  ARTIFACT/emmc-preloader.bin	:= mt7986-bl2 emmc-ddr4
+  ARTIFACT/emmc-bl31-uboot.fip	:= mt7986-bl31-uboot bananapi_bpi-r3-emmc
+  ARTIFACT/nor-preloader.bin	:= mt7986-bl2 nor-ddr4
+  ARTIFACT/nor-bl31-uboot.fip	:= mt7986-bl31-uboot bananapi_bpi-r3-nor
+  ARTIFACT/snand-preloader.bin	:= mt7986-bl2 spim-nand-ddr4
+  ARTIFACT/snand-bl31-uboot.fip	:= mt7986-bl31-uboot bananapi_bpi-r3-snand
+  ARTIFACT/sdcard.img.gz	:= mt798x-gpt sdmmc |\
+				   pad-to 17k | mt7986-bl2 sdmmc-ddr4 |\
+				   pad-to 6656k | mt7986-bl31-uboot bananapi_bpi-r3-sdmmc |\
+				$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+				   pad-to 12M | append-image-stage initramfs-recovery.itb | check-size 44m |\
+				) \
+				   pad-to 44M | mt7986-bl2 spim-nand-ddr4 |\
+				   pad-to 45M | mt7986-bl31-uboot bananapi_bpi-r3-snand |\
+				   pad-to 49M | mt7986-bl2 nor-ddr4 |\
+				   pad-to 50M | mt7986-bl31-uboot bananapi_bpi-r3-nor |\
+				   pad-to 51M | mt7986-bl2 emmc-ddr4 |\
+				   pad-to 52M | mt7986-bl31-uboot bananapi_bpi-r3-emmc |\
+				   pad-to 56M | mt798x-gpt emmc |\
+				$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+				   pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+				) \
+				  gzip
+  IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+  KERNEL			:= kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | pad-rootfs | append-metadata
+  DEVICE_DTC_FLAGS := --pad 4096
+  DEVICE_COMPAT_VERSION := 1.1
+  DEVICE_COMPAT_MESSAGE := Device tree overlay mechanism needs bootloader update
+endef
+TARGET_DEVICES += bananapi_bpi-r3
+
+define Device/cetron_ct3003
+  DEVICE_VENDOR := Cetron
+  DEVICE_MODEL := CT3003
+  DEVICE_DTS := mt7981b-cetron-ct3003
+  DEVICE_DTS_DIR := ../dts
+  SUPPORTED_DEVICES += mediatek,mt7981-spim-snand-rfb
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGES += factory.bin
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | cetron-header rd30 CT3003
+endef
+TARGET_DEVICES += cetron_ct3003
+
+define Device/cudy_wr3000-v1
+  DEVICE_VENDOR := Cudy
+  DEVICE_MODEL := WR3000
+  DEVICE_VARIANT := v1
+  DEVICE_DTS := mt7981b-cudy-wr3000-v1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_DTS_LOADADDR := 0x47000000
+  IMAGES := sysupgrade.bin
+  IMAGE_SIZE := 15424k
+  SUPPORTED_DEVICES += R31
+  KERNEL := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.bin := append-kernel | pad-to 128k | append-rootfs | pad-rootfs | check-size | append-metadata
+  DEVICE_PACKAGES := kmod-mt7981-firmware
+endef
+TARGET_DEVICES += cudy_wr3000-v1
+
+define Device/glinet_gl-mt3000
+  DEVICE_VENDOR := GL.iNet
+  DEVICE_MODEL := GL-MT3000
+  DEVICE_DTS := mt7981b-glinet-gl-mt3000
+  DEVICE_DTS_DIR := ../dts
+  SUPPORTED_DEVICES += glinet,mt3000-snand
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware kmod-hwmon-pwmfan kmod-usb3
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 246272k
+  KERNEL_IN_UBI := 1
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-gl-metadata
+endef
+TARGET_DEVICES += glinet_gl-mt3000
+
+define Device/h3c_magic-nx30-pro
+  DEVICE_VENDOR := H3C
+  DEVICE_MODEL := Magic NX30 Pro
+  DEVICE_DTS := mt7981b-h3c-magic-nx30-pro
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGE_SIZE := 65536k
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+  ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot h3c_magic-nx30-pro
+endef
+TARGET_DEVICES += h3c_magic-nx30-pro
+
+define Device/netgear_wax220
+  DEVICE_VENDOR := NETGEAR
+  DEVICE_MODEL := WAX220
+  DEVICE_DTS := mt7986b-netgear-wax220
+  DEVICE_DTS_DIR := ../dts
+  NETGEAR_ENC_MODEL := WAX220
+  NETGEAR_ENC_REGION := US
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  IMAGE_SIZE := 32768k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  IMAGES += factory.img
+  # Padding to 10M seems to be required by OEM web interface
+  IMAGE/factory.img := sysupgrade-tar | \
+	  pad-to 10M | check-size | netgear-encrypted-factory
+endef
+TARGET_DEVICES += netgear_wax220
+
+define Device/mediatek_mt7981-rfb
+  DEVICE_VENDOR := MediaTek
+  DEVICE_MODEL := MT7981 rfb
+  DEVICE_DTS := mt7981-rfb
+  DEVICE_DTS_OVERLAY:= \
+	mt7981-rfb-spim-nand \
+	mt7981-rfb-mxl-2p5g-phy-eth1 \
+	mt7981-rfb-mxl-2p5g-phy-swp5
+  DEVICE_DTS_DIR := $(DTS_DIR)/
+  DEVICE_DTC_FLAGS := --pad 4096
+  DEVICE_DTS_LOADADDR := 0x43f00000
+  DEVICE_PACKAGES := kmod-mt7981-firmware kmod-usb3 e2fsprogs f2fsck mkf2fs mt7981-wo-firmware
+  KERNEL_LOADADDR := 0x44000000
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  KERNEL_INITRAMFS_SUFFIX := .itb
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+  IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+  ARTIFACTS := \
+	emmc-preloader.bin emmc-bl31-uboot.fip \
+	nor-preloader.bin nor-bl31-uboot.fip \
+	sdcard.img.gz \
+	snfi-nand-preloader.bin snfi-nand-bl31-uboot.fip \
+	spim-nand-preloader.bin spim-nand-bl31-uboot.fip
+  ARTIFACT/emmc-preloader.bin		:= mt7981-bl2 emmc-ddr3
+  ARTIFACT/emmc-bl31-uboot.fip		:= mt7981-bl31-uboot rfb-emmc
+  ARTIFACT/nor-preloader.bin		:= mt7981-bl2 nor-ddr3
+  ARTIFACT/nor-bl31-uboot.fip		:= mt7981-bl31-uboot rfb-emmc
+  ARTIFACT/snfi-nand-preloader.bin	:= mt7981-bl2 snand-ddr3
+  ARTIFACT/snfi-nand-bl31-uboot.fip	:= mt7981-bl31-uboot rfb-snfi
+  ARTIFACT/spim-nand-preloader.bin	:= mt7981-bl2 spim-nand-ddr3
+  ARTIFACT/spim-nand-bl31-uboot.fip	:= mt7981-bl31-uboot rfb-spim-nand
+  ARTIFACT/sdcard.img.gz	:= mt798x-gpt sdmmc |\
+				   pad-to 17k | mt7981-bl2 sdmmc-ddr3 |\
+				   pad-to 6656k | mt7981-bl31-uboot rfb-sd |\
+				$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+				   pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
+				) \
+				   pad-to 44M | mt7981-bl2 spim-nand-ddr3 |\
+				   pad-to 45M | mt7981-bl31-uboot rfb-spim-nand |\
+				   pad-to 49M | mt7981-bl2 nor-ddr3 |\
+				   pad-to 50M | mt7981-bl31-uboot rfb-nor |\
+				   pad-to 51M | mt7981-bl2 snand-ddr3 |\
+				   pad-to 53M | mt7981-bl31-uboot rfb-snfi |\
+				$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+				   pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+				) \
+				  gzip
+endef
+TARGET_DEVICES += mediatek_mt7981-rfb
+
+define Device/mediatek_mt7986a-rfb-nand
+  DEVICE_VENDOR := MediaTek
+  DEVICE_MODEL := MT7986 rfba AP (NAND)
+  DEVICE_DTS := mt7986a-rfb-spim-nand
+  DEVICE_DTS_DIR := $(DTS_DIR)/
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  KERNEL = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+endef
+TARGET_DEVICES += mediatek_mt7986a-rfb-nand
+
+define Device/mediatek_mt7986b-rfb
+  DEVICE_VENDOR := MediaTek
+  DEVICE_MODEL := MTK7986 rfbb AP
+  DEVICE_DTS := mt7986b-rfb
+  DEVICE_DTS_DIR := $(DTS_DIR)/
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  SUPPORTED_DEVICES := mediatek,mt7986b-rfb
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += mediatek_mt7986b-rfb
+
+define Device/mediatek_mt7988a-rfb
+  DEVICE_VENDOR := MediaTek
+  DEVICE_MODEL := MT7988A rfb
+  DEVICE_DTS := mt7988a-rfb
+  DEVICE_DTS_OVERLAY:= \
+	mt7988a-rfb-emmc \
+	mt7988a-rfb-sd \
+	mt7988a-rfb-snfi-nand \
+	mt7988a-rfb-spim-nand \
+	mt7988a-rfb-spim-nor \
+	mt7988a-rfb-eth1-aqr \
+	mt7988a-rfb-eth1-i2p5g-phy \
+	mt7988a-rfb-eth1-mxl \
+	mt7988a-rfb-eth1-sfp \
+	mt7988a-rfb-eth2-aqr \
+	mt7988a-rfb-eth2-mxl \
+	mt7988a-rfb-eth2-sfp
+  DEVICE_DTS_DIR := $(DTS_DIR)/
+  DEVICE_DTC_FLAGS := --pad 4096
+  DEVICE_DTS_LOADADDR := 0x45f00000
+  DEVICE_PACKAGES := kmod-sfp
+  KERNEL_LOADADDR := 0x46000000
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  KERNEL_INITRAMFS_SUFFIX := .itb
+  KERNEL_IN_UBI := 1
+  IMAGE_SIZE := $$(shell expr 64 + $$(CONFIG_TARGET_ROOTFS_PARTSIZE))m
+  IMAGES := sysupgrade.itb
+  IMAGE/sysupgrade.itb := append-kernel | fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | pad-rootfs | append-metadata
+  ARTIFACTS := \
+	       emmc-gpt.bin emmc-preloader.bin emmc-bl31-uboot.fip \
+	       nor-preloader.bin nor-bl31-uboot.fip \
+	       sdcard.img.gz \
+	       snand-preloader.bin snand-bl31-uboot.fip
+  ARTIFACT/emmc-gpt.bin		:= mt798x-gpt emmc
+  ARTIFACT/emmc-preloader.bin	:= mt7988-bl2 emmc-comb
+  ARTIFACT/emmc-bl31-uboot.fip	:= mt7988-bl31-uboot rfb-emmc
+  ARTIFACT/nor-preloader.bin	:= mt7988-bl2 nor-comb
+  ARTIFACT/nor-bl31-uboot.fip	:= mt7988-bl31-uboot rfb-nor
+  ARTIFACT/snand-preloader.bin	:= mt7988-bl2 spim-nand-comb
+  ARTIFACT/snand-bl31-uboot.fip	:= mt7988-bl31-uboot rfb-snand
+  ARTIFACT/sdcard.img.gz	:= mt798x-gpt sdmmc |\
+				   pad-to 17k | mt7988-bl2 sdmmc-comb |\
+				   pad-to 6656k | mt7988-bl31-uboot rfb-sd |\
+				$(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),\
+				   pad-to 12M | append-image-stage initramfs.itb | check-size 44m |\
+				) \
+				   pad-to 44M | mt7988-bl2 spim-nand-comb |\
+				   pad-to 45M | mt7988-bl31-uboot rfb-snand |\
+				   pad-to 51M | mt7988-bl2 nor-comb |\
+				   pad-to 51M | mt7988-bl31-uboot rfb-nor |\
+				   pad-to 55M | mt7988-bl2 emmc-comb |\
+				   pad-to 56M | mt7988-bl31-uboot rfb-emmc |\
+				   pad-to 62M | mt798x-gpt emmc |\
+				$(if $(CONFIG_TARGET_ROOTFS_SQUASHFS),\
+				   pad-to 64M | append-image squashfs-sysupgrade.itb | check-size |\
+				) \
+				  gzip
+endef
+TARGET_DEVICES += mediatek_mt7988a-rfb
+
+define Device/mercusys_mr90x-v1
+  DEVICE_VENDOR := Mercusys
+  DEVICE_MODEL := MR90X v1
+  DEVICE_DTS := mt7986b-mercusys-mr90x-v1
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 51200k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += mercusys_mr90x-v1
+
+define Device/qihoo_360t7
+  DEVICE_VENDOR := Qihoo
+  DEVICE_MODEL := 360T7
+  DEVICE_DTS := mt7981b-qihoo-360t7
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+  ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot qihoo_360t7
+endef
+TARGET_DEVICES += qihoo_360t7
+
+define Device/tplink_tl-xdr-common
+  DEVICE_VENDOR := TP-Link
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-with-rootfs | append-metadata
+  DEVICE_PACKAGES := kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr3
+endef
+
+define Device/tplink_tl-xdr4288
+  DEVICE_MODEL := TL-XDR4288
+  DEVICE_DTS := mt7986a-tplink-tl-xdr4288
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr4288
+  $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr4288
+
+define Device/tplink_tl-xdr6086
+  DEVICE_MODEL := TL-XDR6086
+  DEVICE_DTS := mt7986a-tplink-tl-xdr6086
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6086
+  $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr6086
+
+define Device/tplink_tl-xdr6088
+  DEVICE_MODEL := TL-XDR6088
+  DEVICE_DTS := mt7986a-tplink-tl-xdr6088
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot tplink_tl-xdr6088
+  $(call Device/tplink_tl-xdr-common)
+endef
+TARGET_DEVICES += tplink_tl-xdr6088
+
+define Device/ubnt_unifi-6-plus
+  DEVICE_VENDOR := Ubiquiti
+  DEVICE_MODEL := UniFi 6 Plus
+  DEVICE_DTS := mt7981a-ubnt-unifi-6-plus
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware e2fsprogs f2fsck mkf2fs fdisk partx-utils
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += ubnt_unifi-6-plus
+
+define Device/xiaomi_mi-router-wr30u-112m-nmbm
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Mi Router WR30U (112M UBI with NMBM-Enabled layout)
+  DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-112m-nmbm
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS := initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-112m-nmbm
+
+define Device/xiaomi_mi-router-wr30u-stock
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Mi Router WR30U (stock layout)
+  DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-stock
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS := initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-stock
+
+define Device/xiaomi_mi-router-wr30u-ubootmod
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Mi Router WR30U (OpenWrt U-Boot layout)
+  DEVICE_DTS := mt7981b-xiaomi-mi-router-wr30u-ubootmod
+  DEVICE_DTS_DIR := ../dts
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  IMAGES := sysupgrade.itb
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7981-bl2 spim-nand-ddr3
+  ARTIFACT/bl31-uboot.fip := mt7981-bl31-uboot xiaomi_mi-router-wr30u
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS += initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_mi-router-wr30u-ubootmod
+
+define Device/xiaomi_redmi-router-ax6000-stock
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Redmi Router AX6000 (stock layout)
+  DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-stock
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS := initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += xiaomi_redmi-router-ax6000-stock
+
+define Device/xiaomi_redmi-router-ax6000-ubootmod
+  DEVICE_VENDOR := Xiaomi
+  DEVICE_MODEL := Redmi Router AX6000 (OpenWrt U-Boot layout)
+  DEVICE_DTS := mt7986a-xiaomi-redmi-router-ax6000-ubootmod
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-leds-ws2812b kmod-mt7986-firmware mt7986-wo-firmware
+  KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+  IMAGES := sysupgrade.itb
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  KERNEL_IN_UBI := 1
+  UBOOTENV_IN_UBI := 1
+  KERNEL := kernel-bin | gzip
+  KERNEL_INITRAMFS := kernel-bin | lzma | \
+        fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd | pad-to 64k
+  IMAGE/sysupgrade.itb := append-kernel | \
+        fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb external-static-with-rootfs | append-metadata
+  ARTIFACTS := preloader.bin bl31-uboot.fip
+  ARTIFACT/preloader.bin := mt7986-bl2 spim-nand-ddr4
+  ARTIFACT/bl31-uboot.fip := mt7986-bl31-uboot xiaomi_redmi-router-ax6000
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS += initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-recovery.itb | ubinize-kernel
+endif
+endef
+TARGET_DEVICES += xiaomi_redmi-router-ax6000-ubootmod
+
+define Device/zyxel_ex5601-t0-stock
+  DEVICE_VENDOR := Zyxel
+  DEVICE_MODEL := EX5601-T0  (stock layout)
+  DEVICE_DTS := mt7986a-zyxel-ex5601-t0-stock
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7986-firmware mt7986-wo-firmware
+  SUPPORTED_DEVICES := mediatek,mt7986a-rfb-snand
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 256k
+  PAGESIZE := 4096
+  IMAGE_SIZE := 65536k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE)
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+  KERNEL = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
+  KERNEL_INITRAMFS = kernel-bin | lzma | \
+	fit lzma $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb with-initrd
+endef
+TARGET_DEVICES += zyxel_ex5601-t0-stock
+
+define Device/zyxel_ex5700-telenor
+  DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := EX5700 (Telenor)
+  DEVICE_DTS := mt7986a-zyxel-ex5700-telenor
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7916-firmware kmod-ubootenv-nvram kmod-usb3 kmod-mt7986-firmware mt7986-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 65536k
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_ex5700-telenor
+
+define Device/zyxel_nwa50ax-pro
+  DEVICE_VENDOR := ZyXEL
+  DEVICE_MODEL := NWA50AX Pro
+  DEVICE_DTS := mt7981b-zyxel-nwa50ax-pro
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware zyxel-bootconfig
+  DEVICE_DTS_LOADADDR := 0x44000000
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 51200k
+  KERNEL_IN_UBI := 1
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-ubi | check-size $$$$(IMAGE_SIZE) | zyxel-nwa-fit-filogic
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += zyxel_nwa50ax-pro
+
+define Device/z8102ax
+  DEVICE_VENDOR := ZBT
+  DEVICE_MODEL := Z8102AX
+  DEVICE_DTS := mt7981b-zbt-z8102ax
+  DEVICE_DTS_DIR := ../dts
+  DEVICE_PACKAGES := kmod-mt7981-firmware mt7981-wo-firmware
+  UBINIZE_OPTS := -E 5
+  BLOCKSIZE := 128k
+  PAGESIZE := 2048
+  IMAGE_SIZE := 51200k
+ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
+  ARTIFACTS := initramfs-factory.ubi
+  ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-kernel.bin | ubinize-kernel
+endif
+  IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+TARGET_DEVICES += z8102ax
\ No newline at end of file
diff --git a/config-z8102ax b/config-z8102ax
new file mode 100644
index 00000000..99d10c0c
--- /dev/null
+++ b/config-z8102ax
@@ -0,0 +1,6 @@
+CONFIG_TARGET_mediatek=y
+CONFIG_TARGET_mediatek_filogic=y
+CONFIG_TARGET_mediatek_filogic_DEVICE_z8102ax=y
+CONFIG_KERNEL_ARM64_MODULE_PLTS=y
+CONFIG_KERNEL_TCP_CONG_BBR2=y
+CONFIG_PACKAGE_z8102=y