Add tools for RUTX platform on 6.1 kernel

6.1/target/linux/ipq40xx/base-files/etc/init.d/boot

@@ -0,0 +1,70 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=10
+STOP=90
+
+uci_apply_defaults() {
+	. /lib/functions/system.sh
+
+	cd /etc/uci-defaults || return 0
+	files="$(find . -type f | sort)"
+	[ -z "$files" ] && return 0
+	mkdir -p /tmp/.uci
+	for file in $files; do
+		( . "./$file" ) && rm -f "$file"
+	done
+	uci commit
+}
+
+boot() {
+	[ -f /proc/mounts ] || /sbin/mount_root
+	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
+
+	mkdir -p /var/run
+	mkdir -p /var/log
+	mkdir -p /var/lock
+	mkdir -p /var/state
+	mkdir -p /var/tmp
+	mkdir -p /tmp/.uci
+	chmod 0700 /tmp/.uci
+	touch /var/log/wtmp
+	touch /var/log/lastlog
+	mkdir -p /tmp/resolv.conf.d
+	touch /tmp/resolv.conf.d/resolv.conf.auto
+	ln -sf /tmp/resolv.conf.d/resolv.conf.auto /tmp/resolv.conf
+	grep -q debugfs /proc/filesystems && /bin/mount -o noatime -t debugfs debugfs /sys/kernel/debug
+	grep -q bpf /proc/filesystems && /bin/mount -o nosuid,nodev,noexec,noatime,mode=0700 -t bpf bpffs /sys/fs/bpf
+	grep -q pstore /proc/filesystems && /bin/mount -o noatime -t pstore pstore /sys/fs/pstore
+
+	# mount all entries in fstab
+	/bin/mount -a &
+
+	# /log directory might be created on preinit
+	# symlink /storage to /log on TRB14X devices
+	[ -d /storage -a ! -h /log ] && {
+		rm -rf /log
+		ln -sf /storage /log
+	}
+
+	# Wifi ---
+	param=$(/sbin/mnf_info "--name")
+	router_name=${param:0:6}
+	if [ $router_name == "RUTX08" ] || [ $router_name == "RUTX09" ]; then
+		rm /etc/modules.d/ath10k
+	fi
+
+	/bin/board_detect
+
+	/sbin/kmodloader
+
+	/bin/config_generate
+	uci_apply_defaults
+
+	[ -f "/etc/config/teltonika" ] && rm /etc/config/teltonika
+
+	# temporary hack until configd exists
+	/sbin/reload_config
+	# leave finished boot script indication
+	touch /var/run/boot-done
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/done

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=95
+boot() {
+	mount_root done
+	rm -f /sysupgrade.tgz && sync
+
+	# process user commands
+	[ -f /etc/rc.local ] && {
+		sh /etc/rc.local
+	}
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/gpio_switch

@@ -0,0 +1,66 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2015 OpenWrt.org
+
+START=94
+STOP=10
+USE_PROCD=1
+
+
+load_gpio_switch()
+{
+	local name
+	local gpio_pin
+	local value
+
+	config_get gpio_pin "$1" gpio_pin
+	config_get name "$1" name
+	config_get value "$1" value 0
+
+	[ -z "$gpio_pin" ] && {
+		echo >&2 "Skipping gpio_switch '$name' due to missing gpio_pin"
+		return 1
+	}
+
+	local gpio_path
+	if [ -n "$(echo "$gpio_pin" | grep -E "^[0-9]+$")" ]; then
+		gpio_path="/sys/class/gpio/gpio${gpio_pin}"
+
+		# export GPIO pin for access
+		[ -d "$gpio_path" ] || {
+			echo "$gpio_pin" >/sys/class/gpio/export
+			# we need to wait a bit until the GPIO appears
+			[ -d "$gpio_path" ] || sleep 1
+		}
+
+		# direction attribute only exists if the kernel supports changing the
+		# direction of a GPIO
+		if [ -e "${gpio_path}/direction" ]; then
+			# set the pin to output with high or low pin value
+			{ [ "$value" = "0" ] && echo "low" || echo "high"; } \
+				>"$gpio_path/direction"
+		else
+			{ [ "$value" = "0" ] && echo "0" || echo "1"; } \
+				>"$gpio_path/value"
+		fi
+	else
+		gpio_path="/sys/class/gpio/${gpio_pin}"
+
+		[ -d "$gpio_path" ] && {
+			{ [ "$value" = "0" ] && echo "0" || echo "1"; } \
+				>"$gpio_path/value"
+		}
+	fi
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "system"
+}
+
+start_service()
+{
+	[ -e /sys/class/gpio/ ] && {
+		config_load system
+		config_foreach load_gpio_switch gpio_switch
+	}
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/led

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008 OpenWrt.org
+
+START=96
+
+load_led() {
+	local name
+	local sysfs
+	local trigger
+	local dev
+	local ports
+	local mode
+	local default
+	local delayon
+	local delayoff
+	local interval
+
+	config_get sysfs $1 sysfs
+	config_get name $1 name "$sysfs"
+	config_get trigger $1 trigger "none"
+	config_get dev $1 dev
+	config_get ports $1 port
+	config_get mode $1 mode
+	config_get_bool default $1 default "0"
+	config_get delayon $1 delayon
+	config_get delayoff $1 delayoff
+	config_get interval $1 interval "50"
+	config_get port_state $1 port_state
+	config_get delay $1 delay "150"
+	config_get message $1 message ""
+	config_get gpio $1 gpio "0"
+	config_get inverted $1 inverted "0"
+
+	if [ "$trigger" = "rssi" ]; then
+		# handled by rssileds userspace process
+		return
+	fi
+
+	[ "$trigger" = "usbdev" ] && {
+		# Backward compatibility: translate to the new trigger
+		trigger="usbport"
+		# Translate port of root hub, e.g. 4-1 -> usb4-port1
+		ports=$(echo "$dev" | sed -n 's/^\([0-9]*\)-\([0-9]*\)$/usb\1-port\2/p')
+		# Translate port of extra hub, e.g. 2-2.4 -> 2-2-port4
+		[ -z "$ports" ] && ports=$(echo "$dev" | sed -n 's/\./-port/p')
+	}
+
+	[ -e /sys/class/leds/${sysfs}/brightness ] && {
+		echo "setting up led ${name}"
+
+		printf "%s %s %d\n" \
+			"$sysfs" \
+			"$(sed -ne 's/^.*\[\(.*\)\].*$/\1/p' /sys/class/leds/${sysfs}/trigger)" \
+			"$(cat /sys/class/leds/${sysfs}/brightness)" \
+				>> /var/run/led.state
+
+		[ "$default" = 0 ] &&
+			echo 0 >/sys/class/leds/${sysfs}/brightness
+
+		echo $trigger > /sys/class/leds/${sysfs}/trigger 2> /dev/null
+		ret="$?"
+
+		[ $default = 1 ] &&
+			cat /sys/class/leds/${sysfs}/max_brightness > /sys/class/leds/${sysfs}/brightness
+
+		[ $ret = 0 ] || {
+			echo >&2 "Skipping trigger '$trigger' for led '$name' due to missing kernel module"
+			return 1
+		}
+		case "$trigger" in
+		"netdev")
+			[ -n "$dev" ] && {
+				echo $dev > /sys/class/leds/${sysfs}/device_name
+				for m in $mode; do
+					[ -e "/sys/class/leds/${sysfs}/$m" ] && \
+						echo 1 > /sys/class/leds/${sysfs}/$m
+				done
+				echo $interval > /sys/class/leds/${sysfs}/interval
+			}
+			;;
+
+		"timer"|"oneshot")
+			[ -n "$delayon" ] && \
+				echo $delayon > /sys/class/leds/${sysfs}/delay_on
+			[ -n "$delayoff" ] && \
+				echo $delayoff > /sys/class/leds/${sysfs}/delay_off
+			;;
+
+		"usbport")
+			local p
+
+			for p in $ports; do
+				echo 1 > /sys/class/leds/${sysfs}/ports/$p
+			done
+			;;
+
+		"port_state")
+			[ -n "$port_state" ] && \
+				echo $port_state > /sys/class/leds/${sysfs}/port_state
+			;;
+
+		"gpio")
+			echo $gpio > /sys/class/leds/${sysfs}/gpio
+			echo $inverted > /sys/class/leds/${sysfs}/inverted
+			;;
+
+		switch[0-9]*)
+			local port_mask speed_mask
+
+			config_get port_mask $1 port_mask
+			[ -n "$port_mask" ] && \
+				echo $port_mask > /sys/class/leds/${sysfs}/port_mask
+			config_get speed_mask $1 speed_mask
+			[ -n "$speed_mask" ] && \
+				echo $speed_mask > /sys/class/leds/${sysfs}/speed_mask
+			[ -n "$mode" ] && \
+				echo "$mode" > /sys/class/leds/${sysfs}/mode
+			;;
+		esac
+	}
+}
+
+start() {
+	[ -e /sys/class/leds/ ] && {
+		[ -s /var/run/led.state ] && {
+			local led trigger brightness
+			while read led trigger brightness; do
+				[ -e "/sys/class/leds/$led/trigger" ] && \
+					echo "$trigger" > "/sys/class/leds/$led/trigger"
+
+				[ -e "/sys/class/leds/$led/brightness" ] && \
+					echo "$brightness" > "/sys/class/leds/$led/brightness"
+			done < /var/run/led.state
+			rm /var/run/led.state
+		}
+
+		config_load system
+		config_foreach load_led led
+	}
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/modem_tracker

@@ -0,0 +1,37 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2021 Teltonika Networks
+# Copyright (C) 2022 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
+
+START=2
+
+USE_PROCD=1
+
+PROG=/bin/board_track
+NAME=board_track
+PIDCOUNT=1
+
+start_service() {
+	. /lib/functions
+	
+	[ "$(board_name)" != "teltonika,rutx" ] && return 0
+	local pid_file="/var/run/${NAME}.${PIDCOUNT}.pid"
+
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param file /etc/config/system
+
+	procd_set_param respawn
+
+	procd_set_param stdout 1
+	procd_set_param pidfile $pid_file
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger "system"
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/ntpserver

@@ -0,0 +1,28 @@
+#!/bin/sh /etc/rc.common
+
+# Copyright (C) 2021 Teltonika
+
+START=50
+STOP=51
+USE_PROCD=1
+
+service_triggers()
+{
+	procd_add_reload_trigger "ntpserver"
+}
+
+start_service() {
+	. /lib/functions.sh
+	local enabled
+
+	config_load ntpserver
+	config_get enabled general enabled "0"
+
+	[ "$enabled" -gt 0 ] || return
+
+	logger -t "ntpd" "Starting NTP server"
+	procd_open_instance
+	procd_set_param respawn 0
+	procd_set_param command "ntpd" -ln
+	procd_close_instance
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/powerctl

@@ -0,0 +1,32 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+
+ipq40xx_power_auto() {
+	# change scaling governor as ondemand to enable clock scaling based on system load
+	echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+
+	# set scaling min freq as 200 MHz
+	echo "716000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+
+	# Change sampling rate for frequency scaling decisions to 1s, from 10 ms
+	#echo "1000000" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+
+	# Change sampling rate for frequency down scaling decision to 10s
+	#echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+
+	# Change the CPU load threshold above which frequency is up-scaled to
+	# turbo frequency,to 50%
+	#echo 50 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+}
+
+start() {
+	. /lib/functions.sh
+
+	local board=$(board_name)
+	case "$board" in
+	teltonika,rutx | ap-dk01.1-c1 | ap-dk01.1-c2 | ap-dk04.1-c1 | ap-dk04.1-c2 | ap-dk04.1-c3 | \
+	ap-dk04.1-c4   | ap-dk04.1-c5 | ap-dk05.1-c1 | ap-dk06.1-c1 | ap-dk07.1-c1 | ap-dk07.1-c2 | ap-dk07.1-c3)
+		ipq40xx_power_auto ;;
+	esac
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/sysctl

@@ -0,0 +1,46 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=11
+
+apply_defaults() {
+	local mem="$(awk '/^MemTotal:/ {print $2}' /proc/meminfo)"
+	local min_free frag_low_thresh frag_high_thresh
+
+	if [ "$mem" -gt 65536 ]; then # 128M
+		min_free=16384
+	elif [ "$mem" -gt 32768 ]; then # 64M
+		#Too high for RUT3 device, lets make 2048
+		#min_free=8192
+		min_free=2048
+	else
+		min_free=1024
+		frag_low_thresh=393216
+		frag_high_thresh=524288
+	fi
+
+	sysctl -qw vm.min_free_kbytes="$min_free"
+
+	[ "$frag_low_thresh" ] && sysctl -qw \
+		net.ipv4.ipfrag_low_thresh="$frag_low_thresh" \
+		net.ipv4.ipfrag_high_thresh="$frag_high_thresh" \
+		net.ipv6.ip6frag_low_thresh="$frag_low_thresh" \
+		net.ipv6.ip6frag_high_thresh="$frag_high_thresh" \
+		net.netfilter.nf_conntrack_frag6_low_thresh="$frag_low_thresh" \
+		net.netfilter.nf_conntrack_frag6_high_thresh="$frag_high_thresh"
+
+	# first set default, then all interfaces to avoid races with appearing interfaces
+	if [ -d /proc/sys/net/ipv6/conf ]; then
+		echo 0 > /proc/sys/net/ipv6/conf/default/accept_ra
+		for iface in /proc/sys/net/ipv6/conf/*/accept_ra; do
+			echo 0 > "$iface"
+		done
+	fi
+}
+
+start() {
+	apply_defaults
+	for CONF in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		[ -f "$CONF" ] && sysctl -e -p "$CONF" >&-
+	done
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/sysfixtime

@@ -0,0 +1,34 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2013-2014 OpenWrt.org
+
+START=00
+STOP=90
+
+RTC_DEV=/dev/rtc0
+HWCLOCK=/sbin/hwclock
+
+boot() {
+#	start && exit 0
+
+	local maxtime="$(maxtime)"
+	local curtime="$(date +%s)"
+	[ $curtime -lt $maxtime ] && date -s @$maxtime
+}
+
+start() {
+	boot
+}
+
+stop() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -w -u -f $RTC_DEV && \
+		logger -t sysfixtime "saved '$(date)' to $RTC_DEV"
+}
+
+maxtime() {
+	local file newest
+
+	for file in $( find /etc -type f ) ; do
+		[ -z "$newest" -o "$newest" -ot "$file" ] && newest=$file
+	done
+	[ "$newest" ] && date -r "$newest" +%s
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/system

@@ -0,0 +1,45 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2014 OpenWrt.org
+
+START=10
+USE_PROCD=1
+
+validate_system_section() {
+	uci_load_validate system system "$1" "$2" \
+		'hostname:string:%%NAME%%' \
+		'conloglevel:uinteger' \
+		'buffersize:uinteger' \
+		'timezone:string:UTC' \
+		'zonename:string'
+}
+
+system_config() {
+	[ "$2" = 0 ] || {
+		echo "validation failed"
+		return 1
+	}
+
+	echo "$hostname" > /proc/sys/kernel/hostname
+	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
+	echo "$timezone" > /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
+
+	# apply timezone to kernel
+	hwclock -u --systz
+}
+
+reload_service() {
+	config_load system
+	config_foreach validate_system_section system system_config
+}
+
+service_triggers() {
+	procd_add_reload_trigger "system"
+	procd_add_validation validate_system_section
+}
+
+start_service() {
+	reload_service
+}

6.1/target/linux/ipq40xx/base-files/etc/init.d/umount

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+STOP=90
+
+restart() {
+	:
+}
+
+stop() {
+	sync
+	/bin/umount -a -d -r
+}