Add a directory by kernel instead of a common root, add qnap-301w and rpi4 kernel 6.1 suppport

5.4/target/linux/ipq807x/base-files/etc/board.d/01_leds

@@ -0,0 +1,28 @@
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+edgecore,eap102)
+	ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
+	;;
+redmi,ax6|\
+xiaomi,ax3600)
+	ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
+	;;
+qnap,301w)
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
+	ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
+	ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
+	ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
+	ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
+	;;
+esac
+
+board_config_flush
+
+exit 0

5.4/target/linux/ipq807x/base-files/etc/board.d/02_network

@@ -0,0 +1,46 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq807x_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	buffalo,wxr-5950ax12|\
+	dynalink,dl-wrx36|\
+	xiaomi,ax9000)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	edgecore,eap102)
+		ucidef_set_interfaces_lan_wan "lan" "wan"
+		;;
+	edimax,cax1800)
+		ucidef_set_interfaces_lan_wan "lan"
+		;;
+	qnap,301w)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
+		;;
+	redmi,ax6|\
+	xiaomi,ax3600)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	zyxel,nbg7815)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+board_config_update
+board=$(board_name)
+ipq807x_setup_interfaces $board
+board_config_flush
+
+exit 0

5.4/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata

@@ -0,0 +1,35 @@
+#!/bin/sh
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions/caldata.sh
+
+board=$(board_name)
+
+case "$FIRMWARE" in
+"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
+	case "$board" in
+	buffalo,wxr-5950ax12|\
+	edgecore,eap102|\
+	edimax,cax1800|\
+	dynalink,dl-wrx36|\
+	qnap,301w|\
+	redmi,ax6|\
+	xiaomi,ax3600|\
+	xiaomi,ax9000|\
+	zyxel,nbg7815)
+		caldata_extract "0:art" 0x1000 0x20000
+		;;
+	esac
+	;;
+"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	xiaomi,ax9000)
+		caldata_extract "0:art" 0x26800 0x20000
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

5.4/target/linux/ipq807x/base-files/etc/init.d/bootcount

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+
+START=99
+
+boot() {
+	case $(board_name) in
+	edgecore,eap102)
+		fw_setenv upgrade_available 0
+		# Unset changed flag after sysupgrade complete
+		fw_setenv changed
+	;;
+	esac
+}