Add a directory by kernel instead of a common root, add qnap-301w and rpi4 kernel 6.1 suppport

common/package/utils/sysupgrade-helper/src/board/sbc8548/Makefile

@@ -0,0 +1,50 @@
+#
+# (C) Copyright 2004-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# (C) Copyright 2007 Wind River Systems Inc <www.windriver.com>.
+# Added support for Wind River SBC8548 board
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS-y	+= $(BOARD).o
+COBJS-y	+= law.o
+COBJS-y	+= tlb.o
+COBJS-$(CONFIG_FSL_DDR2) += ddr.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################

common/package/utils/sysupgrade-helper/src/board/sbc8548/ddr.c

@@ -0,0 +1,133 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	/*
+	 * Factors to consider for clock adjust:
+	 *	- number of chips on bus
+	 *	- position of slot
+	 *	- DDR1 vs. DDR2?
+	 *	- ???
+	 *
+	 * This needs to be determined on a board-by-board basis.
+	 *	0110	3/4 cycle late
+	 *	0111	7/8 cycle late
+	 */
+	popts->clk_adjust = 7;
+
+	/*
+	 * Factors to consider for CPO:
+	 *	- frequency
+	 *	- ddr1 vs. ddr2
+	 */
+	popts->cpo_override = 10;
+
+	/*
+	 * Factors to consider for write data delay:
+	 *	- number of DIMMs
+	 *
+	 * 1 = 1/4 clock delay
+	 * 2 = 1/2 clock delay
+	 * 3 = 3/4 clock delay
+	 * 4 = 1   clock delay
+	 * 5 = 5/4 clock delay
+	 * 6 = 3/2 clock delay
+	 */
+	popts->write_data_delay = 3;
+
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+}
+
+#ifdef CONFIG_SPD_EEPROM
+/*
+ * Workaround for hardware errata.  An i2c address conflict
+ * existed on earlier boards; the workaround moved the DDR
+ * SPD from 0x51 to 0x53.  So we try and read 0x53 1st, and
+ * if that fails, then fall back to reading at 0x51.
+ */
+void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
+{
+	int ret;
+
+#ifdef ALT_SPD_EEPROM_ADDRESS
+	if (i2c_address == SPD_EEPROM_ADDRESS) {
+		ret = i2c_read(ALT_SPD_EEPROM_ADDRESS, 0, 1, (uchar *)spd,
+				sizeof(generic_spd_eeprom_t));
+		if (ret == 0)
+			return;		/* Good data at 0x53 */
+		memset(spd, 0, sizeof(generic_spd_eeprom_t));
+	}
+#endif
+	ret = i2c_read(i2c_address, 0, 1, (uchar *)spd,
+				sizeof(generic_spd_eeprom_t));
+	if (ret) {
+		printf("DDR: failed to read SPD from addr %u\n", i2c_address);
+		memset(spd, 0, sizeof(generic_spd_eeprom_t));
+	}
+}
+
+#else
+/*
+ *  fixed_sdram init -- doesn't use serial presence detect.
+ *  Assumes 256MB DDR2 SDRAM SODIMM, without ECC, running at DDR400 speed.
+ */
+phys_size_t fixed_sdram(void)
+{
+	volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+
+	out_be32(&ddr->cs0_bnds,	0x0000007f);
+	out_be32(&ddr->cs1_bnds,	0x008000ff);
+	out_be32(&ddr->cs2_bnds,	0x00000000);
+	out_be32(&ddr->cs3_bnds,	0x00000000);
+
+	out_be32(&ddr->cs0_config,	0x80010101);
+	out_be32(&ddr->cs1_config,	0x80010101);
+	out_be32(&ddr->cs2_config,	0x00000000);
+	out_be32(&ddr->cs3_config,	0x00000000);
+
+	out_be32(&ddr->timing_cfg_3,	0x00000000);
+	out_be32(&ddr->timing_cfg_0,	0x00220802);
+	out_be32(&ddr->timing_cfg_1,	0x38377322);
+	out_be32(&ddr->timing_cfg_2,	0x0fa044C7);
+
+	out_be32(&ddr->sdram_cfg,	0x4300C000);
+	out_be32(&ddr->sdram_cfg_2,	0x24401000);
+
+	out_be32(&ddr->sdram_mode,	0x23C00542);
+	out_be32(&ddr->sdram_mode_2,	0x00000000);
+
+	out_be32(&ddr->sdram_interval,	0x05080100);
+	out_be32(&ddr->sdram_md_cntl,	0x00000000);
+	out_be32(&ddr->sdram_data_init,	0x00000000);
+	out_be32(&ddr->sdram_clk_cntl,	0x03800000);
+	asm("sync;isync;msync");
+	udelay(500);
+
+	#ifdef CONFIG_DDR_ECC
+	  /* Enable ECC checking */
+	  out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL | 0x20000000);
+	#else
+	  out_be32(&ddr->sdram_cfg, CONFIG_SYS_DDR_CONTROL);
+	#endif
+
+	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+}
+#endif

common/package/utils/sysupgrade-helper/src/board/sbc8548/law.c

@@ -0,0 +1,71 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+/*
+ * LAW(Local Access Window) configuration:
+ *
+ * 0x0000_0000	0x0fff_ffff	DDR			256M
+ * 0x8000_0000	0x9fff_ffff	PCI1 MEM		512M
+ * 0xa000_0000	0xbfff_ffff	PCIe MEM		512M
+ * 0xe000_0000	0xe000_ffff	CCSR			1M
+ * 0xe200_0000	0xe27f_ffff	PCI1 IO			8M
+ * 0xe280_0000	0xe2ff_ffff	PCIe IO			8M
+ * 0xec00_0000	0xefff_ffff	FLASH (2nd bank)	64M
+ * 0xf000_0000	0xf7ff_ffff	SDRAM			128M
+ * 0xf8b0_0000	0xf80f_ffff	EEPROM			1M
+ * 0xff80_0000	0xffff_ffff	FLASH (boot bank)	8M
+ *
+ * If swapped CS0/CS6 via JP12+SW2.8:
+ * 0xef80_0000	0xefff_ffff	FLASH (2nd bank)	8M
+ * 0xfc00_0000	0xffff_ffff	FLASH (boot bank)	64M
+ *
+ * Notes:
+ *	CCSRBAR and L2-as-SRAM don't need a configured Local Access Window.
+ *	If flash is 8M at default position (last 8M), no LAW needed.
+ */
+
+struct law_entry law_table[] = {
+#ifdef CONFIG_SYS_ALT_BOOT
+	SET_LAW(CONFIG_SYS_ALT_FLASH, LAW_SIZE_8M, LAW_TRGT_IF_LBC),
+#else
+	SET_LAW(CONFIG_SYS_ALT_FLASH, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
+#endif
+#ifndef CONFIG_SPD_EEPROM
+	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_DDR),
+#endif
+#ifdef CONFIG_SYS_LBC_SDRAM_BASE
+	/* LBC window - maps 256M 0xf0000000 -> 0xffffffff */
+	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_256M, LAW_TRGT_IF_LBC),
+#else
+	/* LBC window - maps 128M 0xf8000000 -> 0xffffffff */
+	SET_LAW(CONFIG_SYS_EPLD_BASE, LAW_SIZE_128M, LAW_TRGT_IF_LBC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);

common/package/utils/sysupgrade-helper/src/board/sbc8548/sbc8548.c

@@ -0,0 +1,328 @@
+/*
+ * Copyright 2007,2009 Wind River Systems, Inc. <www.windriver.com>
+ *
+ * Copyright 2007 Embedded Specialties, Inc.
+ *
+ * Copyright 2004, 2007 Freescale Semiconductor.
+ *
+ * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <pci.h>
+#include <asm/processor.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <spd_sdram.h>
+#include <netdev.h>
+#include <tsec.h>
+#include <miiphy.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void local_bus_init(void);
+
+int board_early_init_f (void)
+{
+	return 0;
+}
+
+int checkboard (void)
+{
+	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
+	volatile u_char *rev= (void *)CONFIG_SYS_BD_REV;
+
+	printf ("Board: Wind River SBC8548 Rev. 0x%01x\n",
+			in_8(rev) >> 4);
+
+	/*
+	 * Initialize local bus.
+	 */
+	local_bus_init ();
+
+	out_be32(&ecm->eedr, 0xffffffff);	/* clear ecm errors */
+	out_be32(&ecm->eeer, 0xffffffff);	/* enable ecm errors */
+	return 0;
+}
+
+/*
+ * Initialize Local Bus
+ */
+void
+local_bus_init(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+
+	uint clkdiv, lbc_mhz, lcrr = CONFIG_SYS_LBC_LCRR;
+	sys_info_t sysinfo;
+
+	get_sys_info(&sysinfo);
+
+	lbc_mhz = sysinfo.freqLocalBus / 1000000;
+	clkdiv = sysinfo.freqSystemBus / sysinfo.freqLocalBus;
+
+	debug("LCRR=0x%x, CD=%d, MHz=%d\n", lcrr, clkdiv, lbc_mhz);
+
+	out_be32(&gur->lbiuiplldcr1, 0x00078080);
+	if (clkdiv == 16) {
+		out_be32(&gur->lbiuiplldcr0, 0x7c0f1bf0);
+	} else if (clkdiv == 8) {
+		out_be32(&gur->lbiuiplldcr0, 0x6c0f1bf0);
+	} else if (clkdiv == 4) {
+		out_be32(&gur->lbiuiplldcr0, 0x5c0f1bf0);
+	}
+
+	/*
+	 * Local Bus Clock > 83.3 MHz. According to timing
+	 * specifications set LCRR[EADC] to 2 delay cycles.
+	 */
+	if (lbc_mhz > 83) {
+		lcrr &= ~LCRR_EADC;
+		lcrr |= LCRR_EADC_2;
+	}
+
+	/*
+	 * According to MPC8548ERMAD Rev. 1.3, 13.3.1.16, 13-30
+	 * disable PLL bypass for Local Bus Clock > 83 MHz.
+	 */
+	if (lbc_mhz >= 66)
+		lcrr &= (~LCRR_DBYP);	/* DLL Enabled */
+
+	else
+		lcrr |= LCRR_DBYP;	/* DLL Bypass */
+
+	out_be32(&lbc->lcrr, lcrr);
+	asm("sync;isync;msync");
+
+	 /*
+	 * According to MPC8548ERMAD Rev.1.3 read back LCRR
+	 * and terminate with isync
+	 */
+	lcrr = in_be32(&lbc->lcrr);
+	asm ("isync;");
+
+	/* let DLL stabilize */
+	udelay(500);
+
+	out_be32(&lbc->ltesr, 0xffffffff);	/* Clear LBC error IRQs */
+	out_be32(&lbc->lteir, 0xffffffff);	/* Enable LBC error IRQs */
+}
+
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+void lbc_sdram_init(void)
+{
+#if defined(CONFIG_SYS_LBC_SDRAM_SIZE)
+
+	uint idx;
+	const unsigned long size = CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024;
+	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
+	uint *sdram_addr2 = (uint *)(CONFIG_SYS_LBC_SDRAM_BASE + size/2);
+
+	puts("    SDRAM: ");
+
+	print_size(size, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers
+	 */
+	set_lbc_or(3, CONFIG_SYS_OR3_PRELIM);
+	set_lbc_br(3, CONFIG_SYS_BR3_PRELIM);
+	set_lbc_or(4, CONFIG_SYS_OR4_PRELIM);
+	set_lbc_br(4, CONFIG_SYS_BR4_PRELIM);
+
+	out_be32(&lbc->lbcr, CONFIG_SYS_LBC_LBCR);
+	asm("msync");
+
+	out_be32(&lbc->lsrt,  CONFIG_SYS_LBC_LSRT);
+	out_be32(&lbc->mrtpr, CONFIG_SYS_LBC_MRTPR);
+	asm("msync");
+
+	/*
+	 * Issue PRECHARGE ALL command.
+	 */
+	out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_PCHALL);
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	*sdram_addr2 = 0xff;
+	ppcDcbf((unsigned long) sdram_addr2);
+	udelay(100);
+
+	/*
+	 * Issue 8 AUTO REFRESH commands.
+	 */
+	for (idx = 0; idx < 8; idx++) {
+		out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_ARFRSH);
+		asm("sync;msync");
+		*sdram_addr = 0xff;
+		ppcDcbf((unsigned long) sdram_addr);
+		*sdram_addr2 = 0xff;
+		ppcDcbf((unsigned long) sdram_addr2);
+		udelay(100);
+	}
+
+	/*
+	 * Issue 8 MODE-set command.
+	 */
+	out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_MRW);
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	*sdram_addr2 = 0xff;
+	ppcDcbf((unsigned long) sdram_addr2);
+	udelay(100);
+
+	/*
+	 * Issue RFEN command.
+	 */
+	out_be32(&lbc->lsdmr, CONFIG_SYS_LBC_LSDMR_RFEN);
+	asm("sync;msync");
+	*sdram_addr = 0xff;
+	ppcDcbf((unsigned long) sdram_addr);
+	*sdram_addr2 = 0xff;
+	ppcDcbf((unsigned long) sdram_addr2);
+	udelay(200);    /* Overkill. Must wait > 200 bus cycles */
+
+#endif	/* enable SDRAM init */
+}
+
+#if defined(CONFIG_SYS_DRAM_TEST)
+int
+testdram(void)
+{
+	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
+	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
+	uint *p;
+
+	printf("Testing DRAM from 0x%08x to 0x%08x\n",
+	       CONFIG_SYS_MEMTEST_START,
+	       CONFIG_SYS_MEMTEST_END);
+
+	printf("DRAM test phase 1:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0xaaaaaaaa;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0xaaaaaaaa) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test phase 2:\n");
+	for (p = pstart; p < pend; p++)
+		*p = 0x55555555;
+
+	for (p = pstart; p < pend; p++) {
+		if (*p != 0x55555555) {
+			printf ("DRAM test fails at: %08x\n", (uint) p);
+			return 1;
+		}
+	}
+
+	printf("DRAM test passed.\n");
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PCI1
+static struct pci_controller pci1_hose;
+#endif	/* CONFIG_PCI1 */
+
+#ifdef CONFIG_PCI
+void
+pci_init_board(void)
+{
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	int first_free_busno = 0;
+
+#ifdef CONFIG_PCI1
+	struct fsl_pci_info pci_info;
+	u32 devdisr = in_be32(&gur->devdisr);
+	u32 pordevsr = in_be32(&gur->pordevsr);
+	u32 porpllsr = in_be32(&gur->porpllsr);
+
+	if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+		uint pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32;
+		uint pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+		uint pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+		uint pci_speed = CONFIG_SYS_CLK_FREQ;	/* get_clock_freq() */
+
+		printf("PCI: Host, %d bit, %s MHz, %s, %s\n",
+			(pci_32) ? 32 : 64,
+			(pci_speed == 33000000) ? "33" :
+			(pci_speed == 66000000) ? "66" : "unknown",
+			pci_clk_sel ? "sync" : "async",
+			pci_arb ? "arbiter" : "external-arbiter");
+
+		SET_STD_PCI_INFO(pci_info, 1);
+		set_next_law(pci_info.mem_phys,
+			law_size_bits(pci_info.mem_size), pci_info.law);
+		set_next_law(pci_info.io_phys,
+			law_size_bits(pci_info.io_size), pci_info.law);
+
+		first_free_busno = fsl_pci_init_port(&pci_info,
+					&pci1_hose, first_free_busno);
+	} else {
+		printf("PCI: disabled\n");
+	}
+
+	puts("\n");
+#else
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
+#endif
+
+	setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable PCI2 */
+
+	fsl_pcie_init_board(first_free_busno);
+}
+#endif
+
+int board_eth_init(bd_t *bis)
+{
+	tsec_standard_init(bis);
+	pci_eth_init(bis);
+	return 0;	/* otherwise cpu_eth_init gets run */
+}
+
+int last_stage_init(void)
+{
+	return 0;
+}
+
+#if defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	ft_cpu_setup(blob, bd);
+
+#ifdef CONFIG_FSL_PCI_INIT
+	FT_FSL_PCI_SETUP;
+#endif
+}
+#endif

common/package/utils/sysupgrade-helper/src/board/sbc8548/tlb.c

@@ -0,0 +1,138 @@
+/*
+ * Copyright 2008 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/*
+	 * TLB 0:	64M	Non-cacheable, guarded
+	 * 0xfc000000	56M	unused
+	 * 0xff800000	8M	boot FLASH
+	 *	.... or ....
+	 * 0xfc000000	64M	user flash
+	 *
+	 * Out of reset this entry is only 4K.
+	 */
+	SET_TLB_ENTRY(1, 0xfc000000, 0xfc000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 1:	1G	Non-cacheable, guarded
+	 * 0x80000000	512M	PCI1 MEM
+	 * 0xa0000000	512M	PCIe MEM
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCI1_MEM_VIRT, CONFIG_SYS_PCI1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_1G, 1),
+
+	/*
+	 * TLB 2:	64M	Non-cacheable, guarded
+	 * 0xe0000000	1M	CCSRBAR
+	 * 0xe2000000	8M	PCI1 IO
+	 * 0xe2800000	8M	PCIe IO
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_64M, 1),
+
+#ifdef CONFIG_SYS_LBC_SDRAM_BASE
+	/*
+	 * TLB 3:	64M	Cacheable, non-guarded
+	 * 0xf0000000	64M	LBC SDRAM First half
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE, CONFIG_SYS_LBC_SDRAM_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 3, BOOKE_PAGESZ_64M, 1),
+
+	/*
+	 * TLB 4:	64M	Cacheable, non-guarded
+	 * 0xf4000000	64M	LBC SDRAM Second half
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
+		      CONFIG_SYS_LBC_SDRAM_BASE + 0x4000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 4, BOOKE_PAGESZ_64M, 1),
+#endif
+
+	/*
+	 * TLB 5:	16M	Cacheable, non-guarded
+	 * 0xf8000000	1M	7-segment LED display
+	 * 0xf8100000	1M	User switches
+	 * 0xf8300000	1M	Board revision
+	 * 0xf8b00000	1M	EEPROM
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_EPLD_BASE, CONFIG_SYS_EPLD_BASE,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_16M, 1),
+
+#ifndef CONFIG_SYS_ALT_BOOT
+	/*
+	 * TLB 6:	64M	Non-cacheable, guarded
+	 * 0xec000000	64M	64MB user FLASH
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_64M, 1),
+#else
+	/*
+	 * TLB 6:	4M	Non-cacheable, guarded
+	 * 0xef800000	4M	1st 1/2 8MB soldered FLASH
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH, CONFIG_SYS_ALT_FLASH,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_4M, 1),
+
+	/*
+	 * TLB 7:	4M	Non-cacheable, guarded
+	 * 0xefc00000	4M	2nd half 8MB soldered FLASH
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_ALT_FLASH + 0x400000,
+		      CONFIG_SYS_ALT_FLASH + 0x400000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 7, BOOKE_PAGESZ_4M, 1),
+#endif
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);