mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00
Code Issues Releases Wiki Activity

Add kernel 6.1 support for BPI-R64

Browse source
This commit is contained in:
Ycarus (Yannick Chabanois) 2023-05-17 20:06:36 +02:00
parent 91028220c3
commit 49e5717c77
73 changed files with 7015 additions and 10 deletions
Download patch file Download diff file Expand all files Collapse all files

107
6.1/target/linux/mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch Normal file
View file

@ -0,0 +1,107 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -1,7 +1,6 @@
/*
- * Copyright (c) 2017 MediaTek Inc.
- * Author: Ming Huang <ming.huang@mediatek.com>
- * Sean Wang <sean.wang@mediatek.com>
+ * Copyright (c) 2018 MediaTek Inc.
+ * Author: Ryder Lee <ryder.lee@mediatek.com>
*
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
*/
@@ -23,7 +22,7 @@
chosen {
stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
};
cpus {
@@ -44,18 +43,18 @@
key-factory {
label = "factory";
linux,code = <BTN_0>;
- gpios = <&pio 0 0>;
+ gpios = <&pio 0 GPIO_ACTIVE_LOW>;
};
key-wps {
label = "wps";
linux,code = <KEY_WPS_BUTTON>;
- gpios = <&pio 102 0>;
+ gpios = <&pio 102 GPIO_ACTIVE_LOW>;
};
};
memory {
- reg = <0 0x40000000 0 0x20000000>;
+ reg = <0 0x40000000 0 0x40000000>;
};
reg_1p8v: regulator-1p8v {
@@ -131,22 +130,22 @@
port@0 {
reg = <0>;
- label = "lan0";
+ label = "lan1";
};
port@1 {
reg = <1>;
- label = "lan1";
+ label = "lan2";
};
port@2 {
reg = <2>;
- label = "lan2";
+ label = "lan3";
};
port@3 {
reg = <3>;
- label = "lan3";
+ label = "lan4";
};
port@4 {
@@ -239,7 +238,22 @@
status = "okay";
};
+&pcie1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie1_pins>;
+ status = "okay";
+};
+
&pio {
+ /* Attention: GPIO 90 is used to switch between PCIe@1,0 and
+ * SATA functions. i.e. output-high: PCIe, output-low: SATA
+ */
+ asm_sel {
+ gpio-hog;
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
/* eMMC is shared pin with parallel NAND */
emmc_pins_default: emmc-pins-default {
mux {
@@ -516,11 +530,11 @@
};
&sata {
- status = "okay";
+ status = "disabled";
};
&sata_phy {
- status = "okay";
+ status = "disabled";
};
&spi0 {

60
6.1/target/linux/mediatek/patches-6.1/101-dts-update-mt7629-rfb.patch Normal file
View file

@ -0,0 +1,60 @@
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -18,6 +18,7 @@
chosen {
stdout-path = "serial0:115200n8";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8";
};
gpio-keys {
@@ -70,6 +71,10 @@
compatible = "mediatek,eth-mac";
reg = <0>;
phy-mode = "2500base-x";
+
+ nvmem-cells = <&macaddr_factory_2a>;
+ nvmem-cell-names = "mac-address";
+
fixed-link {
speed = <2500>;
full-duplex;
@@ -82,6 +87,9 @@
reg = <1>;
phy-mode = "gmii";
phy-handle = <&phy0>;
+
+ nvmem-cells = <&macaddr_factory_24>;
+ nvmem-cell-names = "mac-address";
};
mdio: mdio-bus {
@@ -133,8 +141,9 @@
};
partition@b0000 {
- label = "kernel";
+ label = "firmware";
reg = <0xb0000 0xb50000>;
+ compatible = "denx,fit";
};
};
};
@@ -272,3 +281,17 @@
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
+
+&factory {
+ compatible = "nvmem-cells";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_factory_24: macaddr@24 {
+ reg = <0x24 0x6>;
+ };
+
+ macaddr_factory_2a: macaddr@2a {
+ reg = <0x2a 0x6>;
+ };
+};

20
6.1/target/linux/mediatek/patches-6.1/103-mt7623-enable-arch-timer.patch Normal file
View file

@ -0,0 +1,20 @@
From d6a596012150960f0f3a214d31bbac4b607dbd1e Mon Sep 17 00:00:00 2001
From: Chuanhong Guo <gch981213@gmail.com>
Date: Fri, 29 Apr 2022 10:40:56 +0800
Subject: [PATCH] arm: mediatek: select arch timer for mt7623
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
---
arch/arm/mach-mediatek/Kconfig | 1 +
1 file changed, 1 insertion(+)
--- a/arch/arm/mach-mediatek/Kconfig
+++ b/arch/arm/mach-mediatek/Kconfig
@@ -26,6 +26,7 @@ config MACH_MT6592
config MACH_MT7623
bool "MediaTek MT7623 SoCs support"
default ARCH_MEDIATEK
+ select HAVE_ARM_ARCH_TIMER
config MACH_MT7629
bool "MediaTek MT7629 SoCs support"

10
6.1/target/linux/mediatek/patches-6.1/104-mt7622-add-snor-irq.patch Normal file
View file

@ -0,0 +1,10 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -558,6 +558,7 @@
compatible = "mediatek,mt7622-nor",
"mediatek,mt8173-nor";
reg = <0 0x11014000 0 0xe0>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
clocks = <&pericfg CLK_PERI_FLASH_PD>,
<&topckgen CLK_TOP_FLASH_SEL>;
clock-names = "spi", "sf";

25
6.1/target/linux/mediatek/patches-6.1/105-dts-mt7622-enable-pstore.patch Normal file
View file

@ -0,0 +1,25 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -118,7 +118,7 @@
};
psci {
- compatible = "arm,psci-0.2";
+ compatible = "arm,psci-1.0";
method = "smc";
};
@@ -134,6 +134,13 @@
#size-cells = <2>;
ranges;
+ /* 64 KiB reserved for ramoops/pstore */
+ ramoops@42ff0000 {
+ compatible = "ramoops";
+ reg = <0 0x42ff0000 0 0x10000>;
+ record-size = <0x1000>;
+ };
+
/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
secmon_reserved: secmon@43000000 {
reg = <0 0x43000000 0 0x30000>;

10
6.1/target/linux/mediatek/patches-6.1/110-dts-fix-bpi2-console.patch Normal file
View file

@ -0,0 +1,10 @@
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -19,6 +19,7 @@
chosen {
stdout-path = "serial2:115200n8";
+ bootargs = "console=ttyS2,115200n8 console=tty1";
};
connector {

11
6.1/target/linux/mediatek/patches-6.1/111-dts-fix-bpi64-console.patch Normal file
View file

@ -0,0 +1,11 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -22,7 +22,7 @@
chosen {
stdout-path = "serial0:115200n8";
- bootargs = "earlycon=uart8250,mmio32,0x11002000 swiotlb=512";
+ bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n1 swiotlb=512";
};
cpus {

37
6.1/target/linux/mediatek/patches-6.1/112-dts-fix-bpi64-lan-names.patch Normal file
View file

@ -0,0 +1,37 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -18,6 +18,7 @@
aliases {
serial0 = &uart0;
+ ethernet0 = &gmac0;
};
chosen {
@@ -160,22 +161,22 @@
port@1 {
reg = <1>;
- label = "lan0";
+ label = "lan1";
};
port@2 {
reg = <2>;
- label = "lan1";
+ label = "lan2";
};
port@3 {
reg = <3>;
- label = "lan2";
+ label = "lan3";
};
port@4 {
reg = <4>;
- label = "lan3";
+ label = "lan4";
};
port@6 {

58
6.1/target/linux/mediatek/patches-6.1/113-dts-fix-bpi64-leds-and-buttons.patch Normal file
View file

@ -0,0 +1,58 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -20,6 +20,10 @@
aliases {
serial0 = &uart0;
ethernet0 = &gmac0;
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_blue;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_blue;
};
chosen {
@@ -43,8 +47,8 @@
compatible = "gpio-keys";
factory-key {
- label = "factory";
- linux,code = <BTN_0>;
+ label = "reset";
+ linux,code = <KEY_RESTART>;
gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
};
@@ -58,19 +62,25 @@
leds {
compatible = "gpio-leds";
- led-0 {
- label = "bpi-r64:pio:green";
- color = <LED_COLOR_ID_GREEN>;
- gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
+ led_system_blue: blue {
+ label = "bpi-r64:pio:blue";
+ gpios = <&pio 85 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- led-1 {
- label = "bpi-r64:pio:red";
- color = <LED_COLOR_ID_RED>;
- gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+ led_system_green: green {
+ label = "bpi-r64:pio:green";
+ gpios = <&pio 89 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
+
+/*
+ * red {
+ * label = "bpi-r64:pio:red";
+ * gpios = <&pio 88 GPIO_ACTIVE_HIGH>;
+ * default-state = "off";
+ * };
+ */
};
memory {

21
6.1/target/linux/mediatek/patches-6.1/114-dts-bpi64-disable-rtc.patch Normal file
View file

@ -0,0 +1,21 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -564,12 +564,16 @@
status = "okay";
};
+&rtc {
+ status = "disabled";
+};
+
&sata {
- status = "disable";
+ status = "disabled";
};
&sata_phy {
- status = "disable";
+ status = "disabled";
};
&spi0 {

50
6.1/target/linux/mediatek/patches-6.1/115-dts-bpi64-add-snand-support.patch Normal file
View file

@ -0,0 +1,50 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -259,14 +259,42 @@
status = "disabled";
};
-&nor_flash {
- pinctrl-names = "default";
- pinctrl-0 = <&spi_nor_pins>;
- status = "disabled";
+&bch {
+ status = "okay";
+};
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
flash@0 {
- compatible = "jedec,spi-nor";
+ compatible = "spi-nand";
reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ nand-ecc-engine = <&snfi>;
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "bl2";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "fip";
+ reg = <0x80000 0x200000>;
+ read-only;
+ };
+
+ partition@280000 {
+ label = "ubi";
+ reg = <0x280000 0x7d80000>;
+ };
+ };
};
};

20
6.1/target/linux/mediatek/patches-6.1/121-hack-spi-nand-1b-bbm.patch Normal file
View file

@ -0,0 +1,20 @@
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -714,7 +714,7 @@ static int spinand_mtd_write(struct mtd_
static bool spinand_isbad(struct nand_device *nand, const struct nand_pos *pos)
{
struct spinand_device *spinand = nand_to_spinand(nand);
- u8 marker[2] = { };
+ u8 marker[1] = { };
struct nand_page_io_req req = {
.pos = *pos,
.ooblen = sizeof(marker),
@@ -725,7 +725,7 @@ static bool spinand_isbad(struct nand_de
spinand_select_target(spinand, pos->target);
spinand_read_page(spinand, &req);
- if (marker[0] != 0xff || marker[1] != 0xff)
+ if (marker[0] != 0xff)
return true;
return false;

94
6.1/target/linux/mediatek/patches-6.1/130-dts-mt7629-add-snand-support.patch Normal file
View file

@ -0,0 +1,94 @@
From c813fbe806257c574240770ef716fbee19f7dbfa Mon Sep 17 00:00:00 2001
From: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
Date: Thu, 6 Jun 2019 16:29:04 +0800
Subject: [PATCH] spi: spi-mem: Mediatek: Add SPI Nand support for MT7629
Signed-off-by: Xiangsheng Hou <xiangsheng.hou@mediatek.com>
---
arch/arm/boot/dts/mt7629-rfb.dts | 45 ++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7629.dtsi | 22 ++++++++++++++++
3 files changed, 79 insertions(+)
--- a/arch/arm/boot/dts/mt7629.dtsi
+++ b/arch/arm/boot/dts/mt7629.dtsi
@@ -272,6 +272,27 @@
status = "disabled";
};
+ snfi: spi@1100d000 {
+ compatible = "mediatek,mt7629-snand";
+ reg = <0x1100d000 0x1000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
+ clock-names = "nfi_clk", "pad_clk";
+ nand-ecc-engine = <&bch>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ bch: ecc@1100e000 {
+ compatible = "mediatek,mt7622-ecc";
+ reg = <0x1100e000 0x1000>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&pericfg CLK_PERI_NFIECC_PD>;
+ clock-names = "nfiecc_clk";
+ status = "disabled";
+ };
+
spi: spi@1100a000 {
compatible = "mediatek,mt7629-spi",
"mediatek,mt7622-spi";
--- a/arch/arm/boot/dts/mt7629-rfb.dts
+++ b/arch/arm/boot/dts/mt7629-rfb.dts
@@ -254,6 +254,50 @@
};
};
+&bch {
+ status = "okay";
+};
+
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ nand-ecc-engine = <&snfi>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x00000 0x0100000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "Config";
+ reg = <0x100000 0x0040000>;
+ };
+
+ partition@140000 {
+ label = "factory";
+ reg = <0x140000 0x0080000>;
+ };
+
+ partition@1c0000 {
+ label = "firmware";
+ reg = <0x1c0000 0x1000000>;
+ };
+ };
+ };
+};
+
&spi {
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>;

68
6.1/target/linux/mediatek/patches-6.1/131-dts-mt7622-add-snand-support.patch Normal file
View file

@ -0,0 +1,68 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -539,6 +539,65 @@
status = "disabled";
};
+&bch {
+ status = "okay";
+};
+
+&snfi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&serial_nand_pins>;
+ status = "okay";
+ flash@0 {
+ compatible = "spi-nand";
+ reg = <0>;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ nand-ecc-engine = <&snfi>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Preloader";
+ reg = <0x00000 0x0080000>;
+ read-only;
+ };
+
+ partition@80000 {
+ label = "ATF";
+ reg = <0x80000 0x0040000>;
+ };
+
+ partition@c0000 {
+ label = "Bootloader";
+ reg = <0xc0000 0x0080000>;
+ };
+
+ partition@140000 {
+ label = "Config";
+ reg = <0x140000 0x0080000>;
+ };
+
+ partition@1c0000 {
+ label = "Factory";
+ reg = <0x1c0000 0x0100000>;
+ };
+
+ partition@200000 {
+ label = "firmware";
+ reg = <0x2c0000 0x2000000>;
+ };
+
+ partition@2200000 {
+ label = "User_data";
+ reg = <0x22c0000 0x4000000>;
+ };
+ };
+ };
+};
+
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spic0_pins>;

18
6.1/target/linux/mediatek/patches-6.1/140-dts-fix-wmac-support-for-mt7622-rfb1.patch Normal file
View file

@ -0,0 +1,18 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -580,7 +580,7 @@
reg = <0x140000 0x0080000>;
};
- partition@1c0000 {
+ factory: partition@1c0000 {
label = "Factory";
reg = <0x1c0000 0x0100000>;
};
@@ -641,5 +641,6 @@
&wmac {
pinctrl-names = "default";
pinctrl-0 = <&wmac_pins>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
status = "okay";
};

24
6.1/target/linux/mediatek/patches-6.1/150-dts-mt7623-eip97-inside-secure-support.patch Normal file
View file

@ -0,0 +1,24 @@
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -951,17 +951,15 @@
};
crypto: crypto@1b240000 {
- compatible = "mediatek,eip97-crypto";
+ compatible = "inside-secure,safexcel-eip97";
reg = <0 0x1b240000 0 0x20000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>,
<GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>,
- <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>;
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "ring0", "ring1", "ring2", "ring3";
clocks = <&ethsys CLK_ETHSYS_CRYPTO>;
- clock-names = "cryp";
- power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>;
- status = "disabled";
+ status = "okay";
};
bdpsys: syscon@1c000000 {

11
6.1/target/linux/mediatek/patches-6.1/160-dts-mt7623-bpi-r2-earlycon.patch Normal file
View file

@ -0,0 +1,11 @@
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -19,7 +19,7 @@
chosen {
stdout-path = "serial2:115200n8";
- bootargs = "console=ttyS2,115200n8 console=tty1";
+ bootargs = "earlycon=uart8250,mmio32,0x11004000 console=ttyS2,115200n8 console=tty1";
};
connector {

11
6.1/target/linux/mediatek/patches-6.1/161-dts-mt7623-bpi-r2-mmc-device-order.patch Normal file
View file

@ -0,0 +1,11 @@
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -15,6 +15,8 @@
aliases {
serial2 = &uart2;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
};
chosen {

29
6.1/target/linux/mediatek/patches-6.1/162-dts-mt7623-bpi-r2-led-aliases.patch Normal file
View file

@ -0,0 +1,29 @@
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -17,6 +17,10 @@
serial2 = &uart2;
mmc0 = &mmc0;
mmc1 = &mmc1;
+ led-boot = &led_system_green;
+ led-failsafe = &led_system_blue;
+ led-running = &led_system_green;
+ led-upgrade = &led_system_blue;
};
chosen {
@@ -112,13 +116,13 @@
pinctrl-names = "default";
pinctrl-0 = <&led_pins_a>;
- blue {
+ led_system_blue: blue {
label = "bpi-r2:pio:blue";
gpios = <&pio 240 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- green {
+ led_system_green: green {
label = "bpi-r2:pio:green";
gpios = <&pio 241 GPIO_ACTIVE_LOW>;
default-state = "off";

10
6.1/target/linux/mediatek/patches-6.1/163-dts-mt7623-bpi-r2-ethernet-alias.patch Normal file
View file

@ -0,0 +1,10 @@
--- a/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
+++ b/arch/arm/boot/dts/mt7623n-bananapi-bpi-r2.dts
@@ -15,6 +15,7 @@
aliases {
serial2 = &uart2;
+ ethernet0 = &gmac0;
mmc0 = &mmc0;
mmc1 = &mmc1;
led-boot = &led_system_green;

69
6.1/target/linux/mediatek/patches-6.1/173-arm-dts-mt7623-add-musb-device-nodes.patch Normal file
View file

@ -0,0 +1,69 @@
From 21d106f15262f5a2ef7531636e0703ee61c33c61 Mon Sep 17 00:00:00 2001
From: Sungbo Eo <mans0n@gorani.run>
Date: Sun, 8 Aug 2021 21:38:40 +0900
Subject: [PATCH 2/2] arm: dts: mt7623: add musb device nodes
MT7623 has an musb controller that is compatible with the one from MT2701.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
---
arch/arm/boot/dts/mt7623.dtsi | 34 ++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/mt7623a.dtsi | 4 ++++
2 files changed, 38 insertions(+)
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -585,6 +585,40 @@
status = "disabled";
};
+ usb0: usb@11200000 {
+ compatible = "mediatek,mt7623-musb",
+ "mediatek,mtk-musb";
+ reg = <0 0x11200000 0 0x1000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-names = "mc";
+ phys = <&u2port2 PHY_TYPE_USB2>;
+ dr_mode = "otg";
+ clocks = <&pericfg CLK_PERI_USB0>,
+ <&pericfg CLK_PERI_USB0_MCU>,
+ <&pericfg CLK_PERI_USB_SLV>;
+ clock-names = "main","mcu","univpll";
+ power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+ status = "disabled";
+ };
+
+ u2phy1: t-phy@11210000 {
+ compatible = "mediatek,mt7623-tphy",
+ "mediatek,generic-tphy-v1";
+ reg = <0 0x11210000 0 0x0800>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ u2port2: usb-phy@11210800 {
+ reg = <0 0x11210800 0 0x0100>;
+ clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ status = "okay";
+ };
+ };
+
audsys: clock-controller@11220000 {
compatible = "mediatek,mt7623-audsys",
"mediatek,mt2701-audsys",
--- a/arch/arm/boot/dts/mt7623a.dtsi
+++ b/arch/arm/boot/dts/mt7623a.dtsi
@@ -35,6 +35,10 @@
clock-names = "ethif";
};
+&usb0 {
+ power-domains = <&scpsys MT7623A_POWER_DOMAIN_IFR_MSC>;
+};
+
&usb1 {
power-domains = <&scpsys MT7623A_POWER_DOMAIN_HIF>;
};

13
6.1/target/linux/mediatek/patches-6.1/180-dts-mt7622-bpi-r64-add-mt7531-irq.patch Normal file
View file

@ -0,0 +1,13 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -160,6 +160,10 @@
switch@0 {
compatible = "mediatek,mt7531";
reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&pio>;
+ interrupts = <53 IRQ_TYPE_LEVEL_HIGH>;
reset-gpios = <&pio 54 0>;
ports {

106
6.1/target/linux/mediatek/patches-6.1/190-arm64-dts-mediatek-mt7622-fix-GICv2-range.patch Normal file
View file

@ -0,0 +1,106 @@
From patchwork Tue Apr 26 19:51:36 2022
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
X-Patchwork-Submitter: Daniel Golle <daniel@makrotopia.org>
X-Patchwork-Id: 12827872
Return-Path:
<linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org>
X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on
aws-us-west-2-korg-lkml-1.web.codeaurora.org
Received: from bombadil.infradead.org (bombadil.infradead.org
[198.137.202.133])
(using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits))
(No client certificate requested)
by smtp.lore.kernel.org (Postfix) with ESMTPS id BACF3C433EF
for <linux-arm-kernel@archiver.kernel.org>;
Tue, 26 Apr 2022 19:53:05 +0000 (UTC)
DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed;
d=lists.infradead.org; s=bombadil.20210309; h=Sender:
Content-Transfer-Encoding:Content-Type:List-Subscribe:List-Help:List-Post:
List-Archive:List-Unsubscribe:List-Id:MIME-Version:Message-ID:Subject:Cc:To:
From:Date:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From:
Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:In-Reply-To:References:
List-Owner; bh=OWGSxvlKoyPWz6b629RNINucULo6oOdFssAIiJETWRg=; b=T0HEjee0FX3hlb
x5jl7xLK5sKM0pkE2oRgwzthbFlNg8ST1j/2GkgcgT0S2Bi0vRfFxHeu/RKzS9RmiVnKJnPGL8ctg
WoBLyO5i+NcmosGoy6MmoOjGTNhj/+3q3Z1jRLBSJ4ySSP22X77YeuJTmVzySPUllQhWvDhjMVCR9
QBRmQdc6gCAg3IYGEbWwS2TG+UHveDCeZRWxMzrwI8UPadNCRFROwugmiQ3mdU41lHCTDpnlfuRJh
o1igLKfMBLz+D8rFYvDh7FfkcKkY6lNoswA2HKUun1MEzgoyQKmITPnG2maX/BvJJuj/B3ZJShh4k
AZHmXoQxq1mrsm2FxfnQ==;
Received: from localhost ([::1] helo=bombadil.infradead.org)
by bombadil.infradead.org with esmtp (Exim 4.94.2 #2 (Red Hat Linux))
id 1njRE5-00G05D-9z; Tue, 26 Apr 2022 19:51:57 +0000
Received: from fudo.makrotopia.org ([2a07:2ec0:3002::71])
by bombadil.infradead.org with esmtps (Exim 4.94.2 #2 (Red Hat Linux))
id 1njRE1-00G03h-9H; Tue, 26 Apr 2022 19:51:55 +0000
Received: from local
by fudo.makrotopia.org with esmtpsa (TLS1.3:TLS_AES_256_GCM_SHA384:256)
(Exim 4.94.2) (envelope-from <daniel@makrotopia.org>)
id 1njRDu-0006aF-4F; Tue, 26 Apr 2022 21:51:46 +0200
Date: Tue, 26 Apr 2022 20:51:36 +0100
From: Daniel Golle <daniel@makrotopia.org>
To: devicetree@vger.kernel.org, linux-mediatek@lists.infradead.org,
linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Subject: [PATCH] arm64: dts: mediatek: mt7622: fix GICv2 range
Message-ID: <YmhNSLgp/yg8Vr1F@makrotopia.org>
MIME-Version: 1.0
Content-Disposition: inline
X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3
X-CRM114-CacheID: sfid-20220426_125153_359242_EA3D452C
X-CRM114-Status: GOOD ( 12.45 )
X-BeenThere: linux-arm-kernel@lists.infradead.org
X-Mailman-Version: 2.1.34
Precedence: list
List-Id: <linux-arm-kernel.lists.infradead.org>
List-Unsubscribe:
<http://lists.infradead.org/mailman/options/linux-arm-kernel>,
<mailto:linux-arm-kernel-request@lists.infradead.org?subject=unsubscribe>
List-Archive: <http://lists.infradead.org/pipermail/linux-arm-kernel/>
List-Post: <mailto:linux-arm-kernel@lists.infradead.org>
List-Help: <mailto:linux-arm-kernel-request@lists.infradead.org?subject=help>
List-Subscribe:
<http://lists.infradead.org/mailman/listinfo/linux-arm-kernel>,
<mailto:linux-arm-kernel-request@lists.infradead.org?subject=subscribe>
Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org>
Errors-To:
linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
With the current range specified for the CPU interface there is an
error message at boot:
GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set
Setting irqchip.gicv2_force_probe=1 in bootargs results in:
GIC: Aliased GICv2 at 0x0000000010320000, trying to find the canonical range over 128kB
GIC: Adjusting CPU interface base to 0x000000001032f000
GIC: Using split EOI/Deactivate mode
Using the adjusted CPU interface base and 8K size results in only the
final line remaining and fully working system as well as /proc/interrupts
showing additional IPI3,4,5,6:
IPI3: 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 Timer broadcast interrupts
IPI5: 0 0 IRQ work interrupts
IPI6: 0 0 CPU wake-up interrupts
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -339,7 +339,7 @@
#interrupt-cells = <3>;
interrupt-parent = <&gic>;
reg = <0 0x10310000 0 0x1000>,
- <0 0x10320000 0 0x1000>,
+ <0 0x1032f000 0 0x2000>,
<0 0x10340000 0 0x2000>,
<0 0x10360000 0 0x2000>;
};

48
6.1/target/linux/mediatek/patches-6.1/193-dts-mt7623-thermal_zone_fix.patch Normal file
View file

@ -0,0 +1,48 @@
From 824d56e753a588fcfd650db1822e34a02a48bb77 Mon Sep 17 00:00:00 2001
From: Bruno Umuarama <anonimou_eu@hotmail.com>
Date: Thu, 13 Oct 2022 21:18:21 +0000
Subject: [PATCH] mediatek: mt7623: fix thermal zone
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Raising the temperatures for passive and active trips. @VA1DER
proposed at issue 9396 to remove passive trip. This commit relates to
his suggestion.
Without this patch. the CPU will be throttled all the way down to 98MHz
if the temperature rises even a degree above the trip point, and it was
further discovered that if the internal temperature of the device is
above the first trip point temperature when it boots then it will start
in a throttled state and even
$ echo disabled > /sys/class/thermal/thermal_zone0/mode
will have no effect.
The patch increases the passive trip point and active cooling map. The
throttling temperature will then be at 77°C and 82°C, which is still a
low enough temperature for ARM devices to not be in the real danger
zone, and gives some operational headroom.
Signed-off-by: Bruno Umuarama <anonimou_eu@hotmail.com>
---
arch/arm/boot/dts/mt7623.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -160,13 +160,13 @@
trips {
cpu_passive: cpu-passive {
- temperature = <57000>;
+ temperature = <77000>;
hysteresis = <2000>;
type = "passive";
};
cpu_active: cpu-active {
- temperature = <67000>;
+ temperature = <82000>;
hysteresis = <2000>;
type = "active";
};

66
6.1/target/linux/mediatek/patches-6.1/200-phy-phy-mtk-tphy-Add-hifsys-support.patch Normal file
View file

@ -0,0 +1,66 @@
From 28f9a5e2a3f5441ab5594669ed82da11e32277a9 Mon Sep 17 00:00:00 2001
From: Kristian Evensen <kristian.evensen@gmail.com>
Date: Mon, 30 Apr 2018 14:38:01 +0200
Subject: [PATCH] phy: phy-mtk-tphy: Add hifsys-support
---
drivers/phy/mediatek/phy-mtk-tphy.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -17,6 +17,8 @@
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
#include "phy-mtk-io.h"
@@ -264,6 +266,9 @@
#define TPHY_CLKS_CNT 2
+#define HIF_SYSCFG1 0x14
+#define HIF_SYSCFG1_PHY2_MASK (0x3 << 20)
+
enum mtk_phy_version {
MTK_PHY_V1 = 1,
MTK_PHY_V2,
@@ -331,6 +336,7 @@ struct mtk_tphy {
void __iomem *sif_base; /* only shared sif */
const struct mtk_phy_pdata *pdata;
struct mtk_phy_instance **phys;
+ struct regmap *hif;
int nphys;
int src_ref_clk; /* MHZ, reference clock for slew rate calibrate */
int src_coef; /* coefficient for slew rate calibrate */
@@ -596,6 +602,10 @@ static void pcie_phy_instance_init(struc
if (tphy->pdata->version != MTK_PHY_V1)
return;
+ if (tphy->hif)
+ regmap_update_bits(tphy->hif, HIF_SYSCFG1,
+ HIF_SYSCFG1_PHY2_MASK, 0);
+
mtk_phy_update_bits(phya + U3P_U3_PHYA_DA_REG0,
P3A_RG_XTAL_EXT_PE1H | P3A_RG_XTAL_EXT_PE2H,
FIELD_PREP(P3A_RG_XTAL_EXT_PE1H, 0x2) |
@@ -1241,6 +1251,16 @@ static int mtk_tphy_probe(struct platfor
&tphy->src_coef);
}
+ if (of_find_property(np, "mediatek,phy-switch", NULL)) {
+ tphy->hif = syscon_regmap_lookup_by_phandle(np,
+ "mediatek,phy-switch");
+ if (IS_ERR(tphy->hif)) {
+ dev_err(&pdev->dev,
+ "missing \"mediatek,phy-switch\" phandle\n");
+ return PTR_ERR(tphy->hif);
+ }
+ }
+
port = 0;
for_each_child_of_node(np, child_np) {
struct mtk_phy_instance *instance;

44
6.1/target/linux/mediatek/patches-6.1/320-mmc-mediatek-add-support-for-MT7986-SoC.patch Normal file
View file

@ -0,0 +1,44 @@
From 1a7963e9843f6f1e4b02a30926d20b314c03e4df Mon Sep 17 00:00:00 2001
From: Sam Shih <sam.shih@mediatek.com>
Date: Sat, 25 Jun 2022 02:10:13 +0800
Subject: [PATCH] mmc: mediatek: add support for MT7986 SoC
Adding mt7986 own characteristics and of_device_id to have support
of MT7986 SoC.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Change-Id: I07cf8406cbe8c1a7114b304f35fc3e689e512e5a
---
drivers/mmc/host/mtk-sd.c | 14 ++++++++++++++
1 file changed, 14 insertions(+)
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -591,6 +591,19 @@ static const struct mtk_mmc_compatible m
.support_64g = true,
};
+static const struct mtk_mmc_compatible mt7986_compat = {
+ .clk_div_bits = 12,
+ .recheck_sdio_irq = true,
+ .hs400_tune = false,
+ .pad_tune_reg = MSDC_PAD_TUNE0,
+ .async_fifo = true,
+ .data_tune = true,
+ .busy_check = true,
+ .stop_clk_fix = true,
+ .enhance_rx = true,
+ .support_64g = true,
+};
+
static const struct mtk_mmc_compatible mt8516_compat = {
.clk_div_bits = 12,
.recheck_sdio_irq = true,
@@ -609,6 +622,7 @@ static const struct of_device_id msdc_of
{ .compatible = "mediatek,mt6795-mmc", .data = &mt6795_compat},
{ .compatible = "mediatek,mt7620-mmc", .data = &mt7620_compat},
{ .compatible = "mediatek,mt7622-mmc", .data = &mt7622_compat},
+ { .compatible = "mediatek,mt7986-mmc", .data = &mt7986_compat},
{ .compatible = "mediatek,mt8135-mmc", .data = &mt8135_compat},
{ .compatible = "mediatek,mt8173-mmc", .data = &mt8173_compat},
{ .compatible = "mediatek,mt8183-mmc", .data = &mt8183_compat},

34
6.1/target/linux/mediatek/patches-6.1/330-snand-mtk-bmt-support.patch Normal file
View file

@ -0,0 +1,34 @@
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -19,6 +19,7 @@
#include <linux/string.h>
#include <linux/spi/spi.h>
#include <linux/spi/spi-mem.h>
+#include <linux/mtd/mtk_bmt.h>
static int spinand_read_reg_op(struct spinand_device *spinand, u8 reg, u8 *val)
{
@@ -1333,6 +1334,7 @@ static int spinand_probe(struct spi_mem
if (ret)
return ret;
+ mtk_bmt_attach(mtd);
ret = mtd_device_register(mtd, NULL, 0);
if (ret)
goto err_spinand_cleanup;
@@ -1340,6 +1342,7 @@ static int spinand_probe(struct spi_mem
return 0;
err_spinand_cleanup:
+ mtk_bmt_detach(mtd);
spinand_cleanup(spinand);
return ret;
@@ -1358,6 +1361,7 @@ static int spinand_remove(struct spi_mem
if (ret)
return ret;
+ mtk_bmt_detach(mtd);
spinand_cleanup(spinand);
return 0;

10
6.1/target/linux/mediatek/patches-6.1/331-mt7622-rfb1-enable-bmt.patch Normal file
View file

@ -0,0 +1,10 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-rfb1.dts
@@ -553,6 +553,7 @@
spi-tx-bus-width = <4>;
spi-rx-bus-width = <4>;
nand-ecc-engine = <&snfi>;
+ mediatek,bmt-v2;
partitions {
compatible = "fixed-partitions";

122
6.1/target/linux/mediatek/patches-6.1/340-mtd-spinand-Add-support-for-the-Fidelix-FM35X1GA.patch Normal file
View file

@ -0,0 +1,122 @@
From 5f49a5c9b16330e0df8f639310e4715dcad71947 Mon Sep 17 00:00:00 2001
From: Davide Fioravanti <pantanastyle@gmail.com>
Date: Fri, 8 Jan 2021 15:35:24 +0100
Subject: [PATCH] mtd: spinand: Add support for the Fidelix FM35X1GA
Datasheet: http://www.hobos.com.cn/upload/datasheet/DS35X1GAXXX_100_rev00.pdf
Signed-off-by: Davide Fioravanti <pantanastyle@gmail.com>
---
drivers/mtd/nand/spi/Makefile | 2 +-
drivers/mtd/nand/spi/core.c | 1 +
drivers/mtd/nand/spi/fidelix.c | 76 ++++++++++++++++++++++++++++++++++
include/linux/mtd/spinand.h | 1 +
4 files changed, 79 insertions(+), 1 deletion(-)
create mode 100644 drivers/mtd/nand/spi/fidelix.c
--- a/drivers/mtd/nand/spi/Makefile
+++ b/drivers/mtd/nand/spi/Makefile
@@ -1,3 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-spinand-objs := core.o ato.o esmt.o etron.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
+spinand-objs := core.o ato.o esmt.o etron.o fidelix.o gigadevice.o macronix.o micron.o paragon.o toshiba.o winbond.o xtx.o
obj-$(CONFIG_MTD_SPI_NAND) += spinand.o
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -940,6 +940,7 @@ static const struct nand_ops spinand_ops
static const struct spinand_manufacturer *spinand_manufacturers[] = {
&ato_spinand_manufacturer,
&esmt_c8_spinand_manufacturer,
+ &fidelix_spinand_manufacturer,
&etron_spinand_manufacturer,
&gigadevice_spinand_manufacturer,
&macronix_spinand_manufacturer,
--- /dev/null
+++ b/drivers/mtd/nand/spi/fidelix.c
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Davide Fioravanti <pantanastyle@gmail.com>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_FIDELIX 0xE5
+#define FIDELIX_ECCSR_MASK 0x0F
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+ SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+ SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+ SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+ SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+ SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+ SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int fm35x1ga_ooblayout_ecc(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 8;
+ region->length = 8;
+
+ return 0;
+}
+
+static int fm35x1ga_ooblayout_free(struct mtd_info *mtd, int section,
+ struct mtd_oob_region *region)
+{
+ if (section > 3)
+ return -ERANGE;
+
+ region->offset = (16 * section) + 2;
+ region->length = 6;
+
+ return 0;
+}
+
+static const struct mtd_ooblayout_ops fm35x1ga_ooblayout = {
+ .ecc = fm35x1ga_ooblayout_ecc,
+ .free = fm35x1ga_ooblayout_free,
+};
+
+static const struct spinand_info fidelix_spinand_table[] = {
+ SPINAND_INFO("FM35X1GA",
+ SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x71),
+ NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+ NAND_ECCREQ(4, 512),
+ SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+ &write_cache_variants,
+ &update_cache_variants),
+ SPINAND_HAS_QE_BIT,
+ SPINAND_ECCINFO(&fm35x1ga_ooblayout, NULL)),
+};
+
+static const struct spinand_manufacturer_ops fidelix_spinand_manuf_ops = {
+};
+
+const struct spinand_manufacturer fidelix_spinand_manufacturer = {
+ .id = SPINAND_MFR_FIDELIX,
+ .name = "Fidelix",
+ .chips = fidelix_spinand_table,
+ .nchips = ARRAY_SIZE(fidelix_spinand_table),
+ .ops = &fidelix_spinand_manuf_ops,
+};
--- a/include/linux/mtd/spinand.h
+++ b/include/linux/mtd/spinand.h
@@ -263,6 +263,7 @@ struct spinand_manufacturer {
extern const struct spinand_manufacturer ato_spinand_manufacturer;
extern const struct spinand_manufacturer esmt_c8_spinand_manufacturer;
extern const struct spinand_manufacturer etron_spinand_manufacturer;
+extern const struct spinand_manufacturer fidelix_spinand_manufacturer;
extern const struct spinand_manufacturer gigadevice_spinand_manufacturer;
extern const struct spinand_manufacturer macronix_spinand_manufacturer;
extern const struct spinand_manufacturer micron_spinand_manufacturer;

27
6.1/target/linux/mediatek/patches-6.1/400-crypto-add-eip97-inside-secure-support.patch Normal file
View file

@ -0,0 +1,27 @@
--- a/drivers/crypto/inside-secure/safexcel.c
+++ b/drivers/crypto/inside-secure/safexcel.c
@@ -600,6 +600,14 @@ static int safexcel_hw_init(struct safex
val |= EIP197_MST_CTRL_TX_MAX_CMD(5);
writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
}
+ /*
+ * Set maximum number of TX commands to 2^4 = 16 for EIP97 HW2.1/HW2.3
+ */
+ else {
+ val = 0;
+ val |= EIP97_MST_CTRL_TX_MAX_CMD(4);
+ writel(val, EIP197_HIA_AIC(priv) + EIP197_HIA_MST_CTRL);
+ }
/* Configure wr/rd cache values */
writel(EIP197_MST_CTRL_RD_CACHE(RD_CACHE_4BITS) |
--- a/drivers/crypto/inside-secure/safexcel.h
+++ b/drivers/crypto/inside-secure/safexcel.h
@@ -315,6 +315,7 @@
#define EIP197_MST_CTRL_RD_CACHE(n) (((n) & 0xf) << 0)
#define EIP197_MST_CTRL_WD_CACHE(n) (((n) & 0xf) << 4)
#define EIP197_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 20)
+#define EIP97_MST_CTRL_TX_MAX_CMD(n) (((n) & 0xf) << 4)
#define EIP197_MST_CTRL_BYTE_SWAP BIT(24)
#define EIP197_MST_CTRL_NO_BYTE_SWAP BIT(25)
#define EIP197_MST_CTRL_BYTE_SWAP_BITS GENMASK(25, 24)

26
6.1/target/linux/mediatek/patches-6.1/401-crypto-fix-eip97-cache-incoherent.patch Normal file
View file

@ -0,0 +1,26 @@
--- a/drivers/crypto/inside-secure/safexcel.h
+++ b/drivers/crypto/inside-secure/safexcel.h
@@ -737,6 +737,9 @@ enum safexcel_eip_version {
/* Priority we use for advertising our algorithms */
#define SAFEXCEL_CRA_PRIORITY 300
+/* System cache line size */
+#define SYSTEM_CACHELINE_SIZE 64
+
/* SM3 digest result for zero length message */
#define EIP197_SM3_ZEROM_HASH "\x1A\xB2\x1D\x83\x55\xCF\xA1\x7F" \
"\x8E\x61\x19\x48\x31\xE8\x1A\x8F" \
--- a/drivers/crypto/inside-secure/safexcel_hash.c
+++ b/drivers/crypto/inside-secure/safexcel_hash.c
@@ -55,9 +55,9 @@ struct safexcel_ahash_req {
u8 block_sz; /* block size, only set once */
u8 digest_sz; /* output digest size, only set once */
__le32 state[SHA3_512_BLOCK_SIZE /
- sizeof(__le32)] __aligned(sizeof(__le32));
+ sizeof(__le32)] __aligned(SYSTEM_CACHELINE_SIZE);
- u64 len;
+ u64 len __aligned(SYSTEM_CACHELINE_SIZE);
u64 processed;
u8 cache[HASH_CACHE_SIZE] __aligned(sizeof(u32));

41
6.1/target/linux/mediatek/patches-6.1/405-mt7986-trng-add-rng-support.patch Normal file
View file

@ -0,0 +1,41 @@
From f6ba5e17bee38f8ffe118c47fbfef3cf90eb87ff Mon Sep 17 00:00:00 2001
From: "Mingming.Su" <Mingming.Su@mediatek.com>
Date: Wed, 30 Jun 2021 16:59:32 +0800
Subject: [PATCH] mt7986: trng: add rng support
1. Add trng compatible name for MT7986
2. Fix mtk_rng_wait_ready() function
Signed-off-by: Mingming.Su <Mingming.Su@mediatek.com>
---
drivers/char/hw_random/mtk-rng.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
--- a/drivers/char/hw_random/mtk-rng.c
+++ b/drivers/char/hw_random/mtk-rng.c
@@ -22,7 +22,7 @@
#define RNG_AUTOSUSPEND_TIMEOUT 100
#define USEC_POLL 2
-#define TIMEOUT_POLL 20
+#define TIMEOUT_POLL 60
#define RNG_CTRL 0x00
#define RNG_EN BIT(0)
@@ -77,7 +77,7 @@ static bool mtk_rng_wait_ready(struct hw
readl_poll_timeout_atomic(priv->base + RNG_CTRL, ready,
ready & RNG_READY, USEC_POLL,
TIMEOUT_POLL);
- return !!ready;
+ return !!(ready & RNG_READY);
}
static int mtk_rng_read(struct hwrng *rng, void *buf, size_t max, bool wait)
@@ -179,6 +179,7 @@ static const struct dev_pm_ops mtk_rng_p
#endif /* CONFIG_PM */
static const struct of_device_id mtk_rng_match[] = {
+ { .compatible = "mediatek,mt7986-rng" },
{ .compatible = "mediatek,mt7623-rng" },
{},
};

33
6.1/target/linux/mediatek/patches-6.1/410-bt-mtk-serial-fix.patch Normal file
View file

@ -0,0 +1,33 @@
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -85,6 +85,7 @@ struct serial8250_config {
#define UART_CAP_MINI BIT(17) /* Mini UART on BCM283X family lacks:
* STOP PARITY EPAR SPAR WLEN5 WLEN6
*/
+#define UART_CAP_NMOD (1 << 18) /* UART doesn't do termios */
#define UART_CAP_NOTEMT BIT(18) /* UART without interrupt on TEMT available */
#define UART_BUG_QUOT BIT(0) /* UART has buggy quot LSB */
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -286,7 +286,7 @@ static const struct serial8250_config ua
.tx_loadsz = 16,
.fcr = UART_FCR_ENABLE_FIFO |
UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
- .flags = UART_CAP_FIFO,
+ .flags = UART_CAP_FIFO | UART_CAP_NMOD,
},
[PORT_NPCM] = {
.name = "Nuvoton 16550",
@@ -2754,6 +2754,11 @@ serial8250_do_set_termios(struct uart_po
unsigned long flags;
unsigned int baud, quot, frac = 0;
+ if (up->capabilities & UART_CAP_NMOD) {
+ termios->c_cflag = 0;
+ return;
+ }
+
if (up->capabilities & UART_CAP_MINI) {
termios->c_cflag &= ~(CSTOPB | PARENB | PARODD | CMSPAR);
if ((termios->c_cflag & CSIZE) == CS5 ||

27
6.1/target/linux/mediatek/patches-6.1/420-mtd-spi-nor-add-support-for-Winbond-W25Q512JV.patch Normal file
View file

@ -0,0 +1,27 @@
From: David Bauer <mail@david-bauer.net>
To: linux-mtd@lists.infradead.org
Subject: [PATCH] mtd: spi-nor: add support for Winbond W25Q512JV
Date: Sat, 13 Feb 2021 16:10:47 +0100
The Winbond W25Q512JV is a 512mb SPI-NOR chip. It supports 4K
sectors as well as block protection and Dual-/Quad-read.
Tested on: Ubiquiti UniFi 6 LR
Signed-off-by: David Bauer <mail@david-bauer.net>
---
drivers/mtd/spi-nor/winbond.c | 4 ++++
1 file changed, 4 insertions(+)
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -130,6 +130,9 @@ static const struct flash_info winbond_n
{ "w25q256jw", INFO(0xef6019, 0, 64 * 1024, 512)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ |
SPI_NOR_QUAD_READ) },
+ { "w25q512jv", INFO(0xef4020, 0, 64 * 1024, 1024)
+ FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6 | SPI_NOR_4BIT_BP)
+ NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
{ "w25m512jv", INFO(0xef7119, 0, 64 * 1024, 1024)
NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ |
SPI_NOR_DUAL_READ) },

25
6.1/target/linux/mediatek/patches-6.1/500-gsw-rtl8367s-mt7622-support.patch Normal file
View file

@ -0,0 +1,25 @@
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -366,6 +366,12 @@ config ROCKCHIP_PHY
help
Currently supports the integrated Ethernet PHY.
+config RTL8367S_GSW
+ tristate "rtl8367 Gigabit Switch support for mt7622"
+ depends on NET_VENDOR_MEDIATEK
+ help
+ This driver supports rtl8367s in mt7622
+
config SMSC_PHY
tristate "SMSC PHYs"
help
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o
obj-$(CONFIG_REALTEK_PHY) += realtek.o
obj-$(CONFIG_RENESAS_PHY) += uPD60620.o
obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o
+obj-$(CONFIG_RTL8367S_GSW) += rtk/
obj-$(CONFIG_SMSC_PHY) += smsc.o
obj-$(CONFIG_STE10XP) += ste10Xp.o
obj-$(CONFIG_TERANETICS_PHY) += teranetics.o

34
6.1/target/linux/mediatek/patches-6.1/601-PCI-mediatek-Assert-PERST-for-100ms-for-power-and-cl.patch Normal file
View file

@ -0,0 +1,34 @@
From: qizhong cheng <qizhong.cheng@mediatek.com>
Date: Mon, 27 Dec 2021 21:31:10 +0800
Subject: [PATCH] PCI: mediatek: Assert PERST# for 100ms for power and clock to
stabilize
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
be delayed 100ms (TPVPERL) for the power and clock to become stable.
Link: https://lore.kernel.org/r/20211227133110.14500-1-qizhong.cheng@mediatek.com
Signed-off-by: qizhong cheng <qizhong.cheng@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Pali Rohár <pali@kernel.org>
---
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -702,6 +702,13 @@ static int mtk_pcie_startup_port_v2(stru
*/
writel(PCIE_LINKDOWN_RST_EN, port->base + PCIE_RST_CTRL);
+ /*
+ * Described in PCIe CEM specification sections 2.2 (PERST# Signal) and
+ * 2.2.1 (Initial Power-Up (G3 to S0)). The deassertion of PERST# should
+ * be delayed 100ms (TPVPERL) for the power and clock to become stable.
+ */
+ msleep(100);
+
/* De-assert PHY, PE, PIPE, MAC and configuration reset */
val = readl(port->base + PCIE_RST_CTRL);
val |= PCIE_PHY_RSTB | PCIE_PERSTB | PCIE_PIPE_SRSTB |

28
6.1/target/linux/mediatek/patches-6.1/602-arm64-dts-mediatek-add-mt7622-pcie-slot-node.patch Normal file
View file

@ -0,0 +1,28 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -848,6 +848,12 @@
#address-cells = <0>;
#interrupt-cells = <1>;
};
+
+ slot0: pcie@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ };
};
pcie1: pcie@1a145000 {
@@ -886,6 +892,12 @@
#address-cells = <0>;
#interrupt-cells = <1>;
};
+
+ slot1: pcie@1,0 {
+ reg = <0x0800 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ };
};
sata: sata@1a200000 {

23
6.1/target/linux/mediatek/patches-6.1/610-pcie-mediatek-fix-clearing-interrupt-status.patch Normal file
View file

@ -0,0 +1,23 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 4 Sep 2020 18:33:27 +0200
Subject: [PATCH] pcie-mediatek: fix clearing interrupt status
Clearing the status needs to happen after running the handler, otherwise
we will get an extra spurious interrupt after the cause has been cleared
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -614,9 +614,9 @@ static void mtk_pcie_intr_handler(struct
if (status & INTX_MASK) {
for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
/* Clear the INTx */
- writel(1 << bit, port->base + PCIE_INT_STATUS);
generic_handle_domain_irq(port->irq_domain,
bit - INTX_SHIFT);
+ writel(1 << bit, port->base + PCIE_INT_STATUS);
}
}

82
6.1/target/linux/mediatek/patches-6.1/710-pci-pcie-mediatek-add-support-for-coherent-DMA.patch Normal file
View file

@ -0,0 +1,82 @@
From: Felix Fietkau <nbd@nbd.name>
Date: Fri, 4 Sep 2020 18:42:42 +0200
Subject: [PATCH] pci: pcie-mediatek: add support for coherent DMA
It improves performance by eliminating the need for a cache flush for DMA on
attached devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
---
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -836,6 +836,9 @@
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x8000000>;
status = "disabled";
+ dma-coherent;
+ mediatek,hifsys = <&hifsys>;
+ mediatek,cci-control = <&cci_control2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
@@ -880,6 +883,9 @@
bus-range = <0x00 0xff>;
ranges = <0x82000000 0 0x28000000 0x0 0x28000000 0 0x8000000>;
status = "disabled";
+ dma-coherent;
+ mediatek,hifsys = <&hifsys>;
+ mediatek,cci-control = <&cci_control2>;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 7>;
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -20,6 +20,7 @@
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_platform.h>
+#include <linux/of_address.h>
#include <linux/pci.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
@@ -139,6 +140,11 @@
#define PCIE_LINK_STATUS_V2 0x804
#define PCIE_PORT_LINKUP_V2 BIT(10)
+/* DMA channel mapping */
+#define HIFSYS_DMA_AG_MAP 0x008
+#define HIFSYS_DMA_AG_MAP_PCIE0 BIT(0)
+#define HIFSYS_DMA_AG_MAP_PCIE1 BIT(1)
+
struct mtk_pcie_port;
/**
@@ -1054,6 +1060,27 @@ static int mtk_pcie_setup(struct mtk_pci
struct mtk_pcie_port *port, *tmp;
int err, slot;
+ if (of_dma_is_coherent(node)) {
+ struct regmap *con;
+ u32 mask;
+
+ con = syscon_regmap_lookup_by_phandle(node,
+ "mediatek,cci-control");
+ /* enable CPU/bus coherency */
+ if (!IS_ERR(con))
+ regmap_write(con, 0, 3);
+
+ con = syscon_regmap_lookup_by_phandle(node,
+ "mediatek,hifsys");
+ if (IS_ERR(con)) {
+ dev_err(dev, "missing hifsys node\n");
+ return PTR_ERR(con);
+ }
+
+ mask = HIFSYS_DMA_AG_MAP_PCIE0 | HIFSYS_DMA_AG_MAP_PCIE1;
+ regmap_update_bits(con, HIFSYS_DMA_AG_MAP, mask, mask);
+ }
+
slot = of_get_pci_domain_nr(dev->of_node);
if (slot < 0) {
for_each_available_child_of_node(node, child) {

27
6.1/target/linux/mediatek/patches-6.1/721-dts-mt7622-mediatek-fix-300mhz.patch Normal file
View file

@ -0,0 +1,27 @@
From: Jip de Beer <gpk6x3591g0l@opayq.com>
Date: Sun, 9 Jan 2022 13:14:04 +0100
Subject: [PATCH] mediatek mt7622: fix 300mhz typo in dts
The lowest frequency should be 300MHz, since that is the label
assigned to the OPP in the mt7622.dtsi device tree, while there is one
missing zero in the actual value.
To be clear, the lowest frequency should be 300MHz instead of 30MHz.
As mentioned @dangowrt on the OpenWrt forum there is no benefit in
leaving 30MHz as the lowest frequency.
Signed-off-by: Jip de Beer <gpk6x3591g0l@opayq.com>
Signed-off-by: Fritz D. Ansel <fdansel@yandex.ru>
---
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -24,7 +24,7 @@
compatible = "operating-points-v2";
opp-shared;
opp-300000000 {
- opp-hz = /bits/ 64 <30000000>;
+ opp-hz = /bits/ 64 <300000000>;
opp-microvolt = <950000>;
};

25
6.1/target/linux/mediatek/patches-6.1/722-remove-300Hz-to-prevent-freeze.patch Normal file
View file

@ -0,0 +1,25 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
@@ -23,11 +23,17 @@
cpu_opp_table: opp-table {
compatible = "operating-points-v2";
opp-shared;
- opp-300000000 {
- opp-hz = /bits/ 64 <300000000>;
- opp-microvolt = <950000>;
- };
-
+ /* Due to the bug described at the link below, remove the 300 MHz clock to avoid a low
+ * voltage condition that can cause a hang when rebooting the RT3200/E8450.
+ *
+ * https://forum.openwrt.org/t/belkin-rt3200-linksys-e8450-wifi-ax-discussion/94302/1490
+ *
+ * opp-300000000 {
+ * opp-hz = /bits/ 64 <300000000>;
+ * opp-microvolt = <950000>;
+ * };
+ *
+ */
opp-437500000 {
opp-hz = /bits/ 64 <437500000>;
opp-microvolt = <1000000>;

30
6.1/target/linux/mediatek/patches-6.1/803-i2c-busses-add-mt7986-support.patch Normal file
View file

@ -0,0 +1,30 @@
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -431,6 +431,19 @@ static const struct mtk_i2c_compatible m
.max_dma_support = 33,
};
+static const struct mtk_i2c_compatible mt7986_compat = {
+ .quirks = &mt7622_i2c_quirks,
+ .regs = mt_i2c_regs_v1,
+ .pmic_i2c = 0,
+ .dcm = 1,
+ .auto_restart = 1,
+ .aux_len_reg = 1,
+ .max_dma_support = 32,
+ .timing_adjust = 0,
+ .dma_sync = 1,
+ .ltiming_adjust = 0,
+};
+
static const struct mtk_i2c_compatible mt8173_compat = {
.regs = mt_i2c_regs_v1,
.pmic_i2c = 0,
@@ -503,6 +516,7 @@ static const struct of_device_id mtk_i2c
{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
+ { .compatible = "mediatek,mt7986-i2c", .data = &mt7986_compat },
{ .compatible = "mediatek,mt8168-i2c", .data = &mt8168_compat },
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },

23
6.1/target/linux/mediatek/patches-6.1/804-pwm-add-mt7986-support.patch Normal file
View file

@ -0,0 +1,23 @@
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -302,6 +302,12 @@ static const struct pwm_mediatek_of_data
.has_ck_26m_sel = true,
};
+static const struct pwm_mediatek_of_data mt7986_pwm_data = {
+ .num_pwms = 2,
+ .pwm45_fixup = false,
+ .has_ck_26m_sel = true,
+};
+
static const struct pwm_mediatek_of_data mt8516_pwm_data = {
.num_pwms = 5,
.pwm45_fixup = false,
@@ -314,6 +320,7 @@ static const struct of_device_id pwm_med
{ .compatible = "mediatek,mt7623-pwm", .data = &mt7623_pwm_data },
{ .compatible = "mediatek,mt7628-pwm", .data = &mt7628_pwm_data },
{ .compatible = "mediatek,mt7629-pwm", .data = &mt7629_pwm_data },
+ { .compatible = "mediatek,mt7986-pwm", .data = &mt7986_pwm_data },
{ .compatible = "mediatek,mt8183-pwm", .data = &mt8183_pwm_data },
{ .compatible = "mediatek,mt8516-pwm", .data = &mt8516_pwm_data },
{ },

223
6.1/target/linux/mediatek/patches-6.1/805-thermal-drivers-mediatek-add-support-for-MT7986-and-.patch Normal file
View file

@ -0,0 +1,223 @@
From cd47d86ab09f1f3ec5c86441d4fe95e0cf597c06 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Tue, 13 Sep 2022 00:56:24 +0100
Subject: [PATCH] thermal/drivers/mediatek: add support for MT7986 and MT7981
Add support for V3 generation thermal found in MT7986 and MT7981 SoCs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
drivers/thermal/mtk_thermal.c | 202 +++++++++++++++++++++++++++++++++-
1 file changed, 198 insertions(+), 4 deletions(-)
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -150,6 +150,21 @@
#define CALIB_BUF1_VALID_V2(x) (((x) >> 4) & 0x1)
#define CALIB_BUF1_O_SLOPE_SIGN_V2(x) (((x) >> 3) & 0x1)
+/*
+ * Layout of the fuses providing the calibration data
+ * These macros could be used for MT7981 and MT7986.
+ */
+#define CALIB_BUF0_ADC_GE_V3(x) (((x) >> 0) & 0x3ff)
+#define CALIB_BUF0_ADC_OE_V3(x) (((x) >> 10) & 0x3ff)
+#define CALIB_BUF0_DEGC_CALI_V3(x) (((x) >> 20) & 0x3f)
+#define CALIB_BUF0_O_SLOPE_V3(x) (((x) >> 26) & 0x3f)
+#define CALIB_BUF1_VTS_TS1_V3(x) (((x) >> 0) & 0x1ff)
+#define CALIB_BUF1_VTS_TS2_V3(x) (((x) >> 21) & 0x1ff)
+#define CALIB_BUF1_VTS_TSABB_V3(x) (((x) >> 9) & 0x1ff)
+#define CALIB_BUF1_VALID_V3(x) (((x) >> 18) & 0x1)
+#define CALIB_BUF1_O_SLOPE_SIGN_V3(x) (((x) >> 19) & 0x1)
+#define CALIB_BUF1_ID_V3(x) (((x) >> 20) & 0x1)
+
enum {
VTS1,
VTS2,
@@ -163,6 +178,7 @@ enum {
enum mtk_thermal_version {
MTK_THERMAL_V1 = 1,
MTK_THERMAL_V2,
+ MTK_THERMAL_V3,
};
/* MT2701 thermal sensors */
@@ -245,6 +261,27 @@ enum mtk_thermal_version {
/* The calibration coefficient of sensor */
#define MT8183_CALIBRATION 153
+/* AUXADC channel 11 is used for the temperature sensors */
+#define MT7986_TEMP_AUXADC_CHANNEL 11
+
+/* The total number of temperature sensors in the MT7986 */
+#define MT7986_NUM_SENSORS 1
+
+/* The number of banks in the MT7986 */
+#define MT7986_NUM_ZONES 1
+
+/* The number of sensing points per bank */
+#define MT7986_NUM_SENSORS_PER_ZONE 1
+
+/* MT7986 thermal sensors */
+#define MT7986_TS1 0
+
+/* The number of controller in the MT7986 */
+#define MT7986_NUM_CONTROLLER 1
+
+/* The calibration coefficient of sensor */
+#define MT7986_CALIBRATION 165
+
struct mtk_thermal;
struct thermal_bank_cfg {
@@ -386,6 +423,14 @@ static const int mt7622_mux_values[MT762
static const int mt7622_vts_index[MT7622_NUM_SENSORS] = { VTS1 };
static const int mt7622_tc_offset[MT7622_NUM_CONTROLLER] = { 0x0, };
+/* MT7986 thermal sensor data */
+static const int mt7986_bank_data[MT7986_NUM_SENSORS] = { MT7986_TS1, };
+static const int mt7986_msr[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_MSR0, };
+static const int mt7986_adcpnp[MT7986_NUM_SENSORS_PER_ZONE] = { TEMP_ADCPNP0, };
+static const int mt7986_mux_values[MT7986_NUM_SENSORS] = { 0, };
+static const int mt7986_vts_index[MT7986_NUM_SENSORS] = { VTS1 };
+static const int mt7986_tc_offset[MT7986_NUM_CONTROLLER] = { 0x0, };
+
/*
* The MT8173 thermal controller has four banks. Each bank can read up to
* four temperature sensors simultaneously. The MT8173 has a total of 5
@@ -549,6 +594,30 @@ static const struct mtk_thermal_data mt8
.version = MTK_THERMAL_V1,
};
+/*
+ * MT7986 uses AUXADC Channel 11 for raw data access.
+ */
+static const struct mtk_thermal_data mt7986_thermal_data = {
+ .auxadc_channel = MT7986_TEMP_AUXADC_CHANNEL,
+ .num_banks = MT7986_NUM_ZONES,
+ .num_sensors = MT7986_NUM_SENSORS,
+ .vts_index = mt7986_vts_index,
+ .cali_val = MT7986_CALIBRATION,
+ .num_controller = MT7986_NUM_CONTROLLER,
+ .controller_offset = mt7986_tc_offset,
+ .need_switch_bank = true,
+ .bank_data = {
+ {
+ .num_sensors = 1,
+ .sensors = mt7986_bank_data,
+ },
+ },
+ .msr = mt7986_msr,
+ .adcpnp = mt7986_adcpnp,
+ .sensor_mux_values = mt7986_mux_values,
+ .version = MTK_THERMAL_V3,
+};
+
/**
* raw_to_mcelsius - convert a raw ADC value to mcelsius
* @mt: The thermal controller
@@ -603,6 +672,22 @@ static int raw_to_mcelsius_v2(struct mtk
return (format_2 - tmp) * 100;
}
+static int raw_to_mcelsius_v3(struct mtk_thermal *mt, int sensno, s32 raw)
+{
+ s32 tmp;
+
+ if (raw == 0)
+ return 0;
+
+ raw &= 0xfff;
+ tmp = 100000 * 15 / 16 * 10000;
+ tmp /= 4096 - 512 + mt->adc_ge;
+ tmp /= 1490;
+ tmp *= raw - mt->vts[sensno] - 2900 - mt->adc_oe + 512;
+
+ return mt->degc_cali * 500 - tmp;
+}
+
/**
* mtk_thermal_get_bank - get bank
* @bank: The bank
@@ -659,9 +744,12 @@ static int mtk_thermal_bank_temperature(
if (mt->conf->version == MTK_THERMAL_V1) {
temp = raw_to_mcelsius_v1(
mt, conf->bank_data[bank->id].sensors[i], raw);
- } else {
+ } else if (mt->conf->version == MTK_THERMAL_V2) {
temp = raw_to_mcelsius_v2(
mt, conf->bank_data[bank->id].sensors[i], raw);
+ } else {
+ temp = raw_to_mcelsius_v3(
+ mt, conf->bank_data[bank->id].sensors[i], raw);
}
/*
@@ -887,6 +975,26 @@ static int mtk_thermal_extract_efuse_v2(
return 0;
}
+static int mtk_thermal_extract_efuse_v3(struct mtk_thermal *mt, u32 *buf)
+{
+ if (!CALIB_BUF1_VALID_V3(buf[1]))
+ return -EINVAL;
+
+ mt->adc_oe = CALIB_BUF0_ADC_OE_V3(buf[0]);
+ mt->adc_ge = CALIB_BUF0_ADC_GE_V3(buf[0]);
+ mt->degc_cali = CALIB_BUF0_DEGC_CALI_V3(buf[0]);
+ mt->o_slope = CALIB_BUF0_O_SLOPE_V3(buf[0]);
+ mt->vts[VTS1] = CALIB_BUF1_VTS_TS1_V3(buf[1]);
+ mt->vts[VTS2] = CALIB_BUF1_VTS_TS2_V3(buf[1]);
+ mt->vts[VTSABB] = CALIB_BUF1_VTS_TSABB_V3(buf[1]);
+ mt->o_slope_sign = CALIB_BUF1_O_SLOPE_SIGN_V3(buf[1]);
+
+ if (CALIB_BUF1_ID_V3(buf[1]) == 0)
+ mt->o_slope = 0;
+
+ return 0;
+}
+
static int mtk_thermal_get_calibration_data(struct device *dev,
struct mtk_thermal *mt)
{
@@ -897,6 +1005,7 @@ static int mtk_thermal_get_calibration_d
/* Start with default values */
mt->adc_ge = 512;
+ mt->adc_oe = 512;
for (i = 0; i < mt->conf->num_sensors; i++)
mt->vts[i] = 260;
mt->degc_cali = 40;
@@ -924,8 +1033,10 @@ static int mtk_thermal_get_calibration_d
if (mt->conf->version == MTK_THERMAL_V1)
ret = mtk_thermal_extract_efuse_v1(mt, buf);
- else
+ else if (mt->conf->version == MTK_THERMAL_V2)
ret = mtk_thermal_extract_efuse_v2(mt, buf);
+ else
+ ret = mtk_thermal_extract_efuse_v3(mt, buf);
if (ret) {
dev_info(dev, "Device not calibrated, using default calibration values\n");
@@ -956,6 +1067,10 @@ static const struct of_device_id mtk_the
.data = (void *)&mt7622_thermal_data,
},
{
+ .compatible = "mediatek,mt7986-thermal",
+ .data = (void *)&mt7986_thermal_data,
+ },
+ {
.compatible = "mediatek,mt8183-thermal",
.data = (void *)&mt8183_thermal_data,
}, {
@@ -1070,7 +1185,8 @@ static int mtk_thermal_probe(struct plat
goto err_disable_clk_auxadc;
}
- if (mt->conf->version == MTK_THERMAL_V2) {
+ if (mt->conf->version == MTK_THERMAL_V2 ||
+ mt->conf->version == MTK_THERMAL_V3) {
mtk_thermal_turn_on_buffer(apmixed_base);
mtk_thermal_release_periodic_ts(mt, auxadc_base);
}

65
6.1/target/linux/mediatek/patches-6.1/900-dts-mt7622-bpi-r64-aliases-for-dtoverlay.patch Normal file
View file

@ -0,0 +1,65 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -318,7 +318,7 @@
/* Attention: GPIO 90 is used to switch between PCIe@1,0 and
* SATA functions. i.e. output-high: PCIe, output-low: SATA
*/
- asm_sel {
+ asmsel: asm_sel {
gpio-hog;
gpios = <90 GPIO_ACTIVE_HIGH>;
output-high;
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-sata.dts
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+ fragment@0 {
+ target = <&asmsel>;
+ __overlay__ {
+ gpios = <90 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ fragment@1 {
+ target = <&sata>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+
+ fragment@2 {
+ target = <&sata_phy>;
+ __overlay__ {
+ status = "okay";
+ };
+ };
+};
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64-pcie1.dts
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR MIT) */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/dts-v1/;
+/plugin/;
+
+/ {
+ compatible = "bananapi,bpi-r64", "mediatek,mt7622";
+
+ fragment@0 {
+ target = <&asmsel>;
+ __overlay__ {
+ gpios = <90 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};

37
6.1/target/linux/mediatek/patches-6.1/901-arm-add-cmdline-override.patch Normal file
View file

@ -0,0 +1,37 @@
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1729,6 +1729,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
endchoice
+config CMDLINE_OVERRIDE
+ bool "Use alternative cmdline from device tree"
+ help
+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can
+ be used, this is not a good option for kernels that are shared across
+ devices. This setting enables using "chosen/cmdline-override" as the
+ cmdline if it exists in the device tree.
+
config CMDLINE
string "Default kernel command string"
default ""
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -1162,6 +1162,17 @@ int __init early_init_dt_scan_chosen(uns
if (p != NULL && l > 0)
strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE));
+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different
+ * device tree option of chosen/bootargs-override. This is
+ * helpful on boards where u-boot sets bootargs, and is unable
+ * to be modified.
+ */
+#ifdef CONFIG_CMDLINE_OVERRIDE
+ p = of_get_flat_dt_prop(node, "bootargs-override", &l);
+ if (p != NULL && l > 0)
+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE));
+#endif
+
/*
* CONFIG_CMDLINE is meant to be a default in case nothing else
* managed to set the command line, unless CONFIG_CMDLINE_FORCE

31
6.1/target/linux/mediatek/patches-6.1/910-dts-mt7622-bpi-r64-wifi-eeprom.patch Normal file
View file

@ -0,0 +1,31 @@
--- a/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7622-bananapi-bpi-r64.dts
@@ -645,5 +645,28 @@
};
&wmac {
+ mediatek,eeprom-data = <0x22760500 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x44000020 0x0 0x10002000
+ 0x4400 0x4000000 0x0 0x0
+ 0x200000b3 0x40b6c3c3 0x26000000 0x41c42600
+ 0x41c4 0x26000000 0xc0c52600 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0xc6c6
+ 0xc3c3c2c1 0xc300c3 0x818181 0x83c1c182
+ 0x83838382 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x84002e00 0x90000087 0x8a000000 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0xb000009 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x0
+ 0x0 0x0 0x0 0x7707>;
+
status = "okay";
};

240
6.1/target/linux/mediatek/patches-6.1/920-Revert-cpufreq-mediatek-Refine-mtk_cpufreq_voltage_t.patch Normal file
View file

@ -0,0 +1,240 @@
From 71fd1c93f34b21e79ef18e83ce8fd40566fd7a71 Mon Sep 17 00:00:00 2001
From: Nick Hainke <vincent@systemli.org>
Date: Mon, 7 Nov 2022 13:09:29 +0100
Subject: [PATCH] Revert "cpufreq: mediatek: Refine
mtk_cpufreq_voltage_tracking()"
This reverts commit 6a17b3876bc8303612d7ad59ecf7cbc0db418bcd.
---
drivers/cpufreq/mediatek-cpufreq.c | 147 +++++++++++++++++++----------
1 file changed, 96 insertions(+), 51 deletions(-)
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 7f2680bc9a0f..4466d0c91a6a 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -8,7 +8,6 @@
#include <linux/cpu.h>
#include <linux/cpufreq.h>
#include <linux/cpumask.h>
-#include <linux/minmax.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -16,6 +15,8 @@
#include <linux/pm_opp.h>
#include <linux/regulator/consumer.h>
+#define VOLT_TOL (10000)
+
struct mtk_cpufreq_platform_data {
int min_volt_shift;
int max_volt_shift;
@@ -55,7 +56,6 @@ struct mtk_cpu_dvfs_info {
unsigned int opp_cpu;
unsigned long current_freq;
const struct mtk_cpufreq_platform_data *soc_data;
- int vtrack_max;
bool ccifreq_bound;
};
@@ -82,7 +82,6 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
struct regulator *proc_reg = info->proc_reg;
struct regulator *sram_reg = info->sram_reg;
int pre_vproc, pre_vsram, new_vsram, vsram, vproc, ret;
- int retry = info->vtrack_max;
pre_vproc = regulator_get_voltage(proc_reg);
if (pre_vproc < 0) {
@@ -90,44 +89,91 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
"invalid Vproc value: %d\n", pre_vproc);
return pre_vproc;
}
+ /* Vsram should not exceed the maximum allowed voltage of SoC. */
+ new_vsram = min(new_vproc + soc_data->min_volt_shift,
+ soc_data->sram_max_volt);
+
+ if (pre_vproc < new_vproc) {
+ /*
+ * When scaling up voltages, Vsram and Vproc scale up step
+ * by step. At each step, set Vsram to (Vproc + 200mV) first,
+ * then set Vproc to (Vsram - 100mV).
+ * Keep doing it until Vsram and Vproc hit target voltages.
+ */
+ do {
+ pre_vsram = regulator_get_voltage(sram_reg);
+ if (pre_vsram < 0) {
+ dev_err(info->cpu_dev,
+ "invalid Vsram value: %d\n", pre_vsram);
+ return pre_vsram;
+ }
+ pre_vproc = regulator_get_voltage(proc_reg);
+ if (pre_vproc < 0) {
+ dev_err(info->cpu_dev,
+ "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
+ }
- pre_vsram = regulator_get_voltage(sram_reg);
- if (pre_vsram < 0) {
- dev_err(info->cpu_dev, "invalid Vsram value: %d\n", pre_vsram);
- return pre_vsram;
- }
+ vsram = min(new_vsram,
+ pre_vproc + soc_data->min_volt_shift);
- new_vsram = clamp(new_vproc + soc_data->min_volt_shift,
- soc_data->sram_min_volt, soc_data->sram_max_volt);
+ if (vsram + VOLT_TOL >= soc_data->sram_max_volt) {
+ vsram = soc_data->sram_max_volt;
- do {
- if (pre_vproc <= new_vproc) {
- vsram = clamp(pre_vproc + soc_data->max_volt_shift,
- soc_data->sram_min_volt, new_vsram);
- ret = regulator_set_voltage(sram_reg, vsram,
- soc_data->sram_max_volt);
+ /*
+ * If the target Vsram hits the maximum voltage,
+ * try to set the exact voltage value first.
+ */
+ ret = regulator_set_voltage(sram_reg, vsram,
+ vsram);
+ if (ret)
+ ret = regulator_set_voltage(sram_reg,
+ vsram - VOLT_TOL,
+ vsram);
- if (ret)
- return ret;
-
- if (vsram == soc_data->sram_max_volt ||
- new_vsram == soc_data->sram_min_volt)
vproc = new_vproc;
- else
+ } else {
+ ret = regulator_set_voltage(sram_reg, vsram,
+ vsram + VOLT_TOL);
+
vproc = vsram - soc_data->min_volt_shift;
+ }
+ if (ret)
+ return ret;
ret = regulator_set_voltage(proc_reg, vproc,
- soc_data->proc_max_volt);
+ vproc + VOLT_TOL);
if (ret) {
regulator_set_voltage(sram_reg, pre_vsram,
- soc_data->sram_max_volt);
+ pre_vsram);
return ret;
}
- } else if (pre_vproc > new_vproc) {
+ } while (vproc < new_vproc || vsram < new_vsram);
+ } else if (pre_vproc > new_vproc) {
+ /*
+ * When scaling down voltages, Vsram and Vproc scale down step
+ * by step. At each step, set Vproc to (Vsram - 200mV) first,
+ * then set Vproc to (Vproc + 100mV).
+ * Keep doing it until Vsram and Vproc hit target voltages.
+ */
+ do {
+ pre_vproc = regulator_get_voltage(proc_reg);
+ if (pre_vproc < 0) {
+ dev_err(info->cpu_dev,
+ "invalid Vproc value: %d\n", pre_vproc);
+ return pre_vproc;
+ }
+ pre_vsram = regulator_get_voltage(sram_reg);
+ if (pre_vsram < 0) {
+ dev_err(info->cpu_dev,
+ "invalid Vsram value: %d\n", pre_vsram);
+ return pre_vsram;
+ }
+
vproc = max(new_vproc,
pre_vsram - soc_data->max_volt_shift);
ret = regulator_set_voltage(proc_reg, vproc,
- soc_data->proc_max_volt);
+ vproc + VOLT_TOL);
if (ret)
return ret;
@@ -137,24 +183,32 @@ static int mtk_cpufreq_voltage_tracking(struct mtk_cpu_dvfs_info *info,
vsram = max(new_vsram,
vproc + soc_data->min_volt_shift);
- ret = regulator_set_voltage(sram_reg, vsram,
- soc_data->sram_max_volt);
+ if (vsram + VOLT_TOL >= soc_data->sram_max_volt) {
+ vsram = soc_data->sram_max_volt;
+
+ /*
+ * If the target Vsram hits the maximum voltage,
+ * try to set the exact voltage value first.
+ */
+ ret = regulator_set_voltage(sram_reg, vsram,
+ vsram);
+ if (ret)
+ ret = regulator_set_voltage(sram_reg,
+ vsram - VOLT_TOL,
+ vsram);
+ } else {
+ ret = regulator_set_voltage(sram_reg, vsram,
+ vsram + VOLT_TOL);
+ }
+
if (ret) {
regulator_set_voltage(proc_reg, pre_vproc,
- soc_data->proc_max_volt);
+ pre_vproc);
return ret;
}
- }
-
- pre_vproc = vproc;
- pre_vsram = vsram;
-
- if (--retry < 0) {
- dev_err(info->cpu_dev,
- "over loop count, failed to set voltage\n");
- return -EINVAL;
- }
- } while (vproc != new_vproc || vsram != new_vsram);
+ } while (vproc > new_vproc + VOLT_TOL ||
+ vsram > new_vsram + VOLT_TOL);
+ }
return 0;
}
@@ -250,8 +304,8 @@ static int mtk_cpufreq_set_target(struct cpufreq_policy *policy,
* If the new voltage or the intermediate voltage is higher than the
* current voltage, scale up voltage first.
*/
- target_vproc = max(inter_vproc, vproc);
- if (pre_vproc <= target_vproc) {
+ target_vproc = (inter_vproc > vproc) ? inter_vproc : vproc;
+ if (pre_vproc < target_vproc) {
ret = mtk_cpufreq_set_voltage(info, target_vproc);
if (ret) {
dev_err(cpu_dev,
@@ -513,15 +567,6 @@ static int mtk_cpu_dvfs_info_init(struct mtk_cpu_dvfs_info *info, int cpu)
*/
info->need_voltage_tracking = (info->sram_reg != NULL);
- /*
- * We assume min voltage is 0 and tracking target voltage using
- * min_volt_shift for each iteration.
- * The vtrack_max is 3 times of expeted iteration count.
- */
- info->vtrack_max = 3 * DIV_ROUND_UP(max(info->soc_data->sram_max_volt,
- info->soc_data->proc_max_volt),
- info->soc_data->min_volt_shift);
-
return 0;
out_disable_inter_clock:
--
2.38.1