mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
Update kernel and OpenWrt
This commit is contained in:
Ycarus (Yannick Chabanois)
parent
32af00ff63
commit
4db21fc111
35 changed files with 4925 additions and 491 deletions
|
|
@ -5,14 +5,14 @@
|
|||
/ {
|
||||
model = "P&W R619AC 128M";
|
||||
compatible = "p2w,r619ac-128m";
|
||||
|
||||
chosen {
|
||||
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
|
||||
};
|
||||
};
|
||||
|
||||
&rootfs_part1 {
|
||||
&nand_rootfs {
|
||||
/*
|
||||
* Watch out: stock MIBIB is set up for a 64MiB chip.
|
||||
* If a 128MiB flash chip is used, make sure to have
|
||||
* the right values in MIBIB or the device might not
|
||||
* boot.
|
||||
*/
|
||||
reg = <0x0 0x8000000>;
|
||||
};
|
||||
|
||||
/delete-node/ &rootfs_part2;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,12 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq4019-r619ac.dtsi"
|
||||
|
||||
/ {
|
||||
model = "P&W R619AC 64M";
|
||||
compatible = "p2w,r619ac-64m";
|
||||
};
|
||||
|
||||
&nand_rootfs {
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
|
@ -1,12 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
|
||||
#include "qcom-ipq4019-r619ac.dtsi"
|
||||
|
||||
/ {
|
||||
model = "P&W R619AC";
|
||||
compatible = "p2w,r619ac";
|
||||
|
||||
chosen {
|
||||
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
|
||||
};
|
||||
};
|
||||
|
|
@ -4,8 +4,13 @@
|
|||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
aliases {
|
||||
led-boot = &led_sys;
|
||||
led-failsafe = &led_sys;
|
||||
|
|
@ -80,24 +85,30 @@
|
|||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&led_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
led_sys: sys {
|
||||
label = "r619ac:blue:sys";
|
||||
led_sys: led-0 {
|
||||
label = "blue:sys";
|
||||
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_POWER;
|
||||
};
|
||||
|
||||
wlan2g {
|
||||
label = "r619ac:blue:wlan2g";
|
||||
led-1 {
|
||||
label = "blue:wlan2g";
|
||||
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy0tpt";
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <0>;
|
||||
};
|
||||
|
||||
wlan5g {
|
||||
label = "r619ac:blue:wlan5g";
|
||||
led-2 {
|
||||
label = "blue:wlan5g";
|
||||
gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "phy1tpt";
|
||||
color = <LED_COLOR_ID_BLUE>;
|
||||
function = LED_FUNCTION_WLAN;
|
||||
function-enumerator = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -171,21 +182,38 @@
|
|||
read-only;
|
||||
};
|
||||
|
||||
partition@1 {
|
||||
label = "Bootloader";
|
||||
reg = <0x0 0x170000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@170000 {
|
||||
label = "ART";
|
||||
reg = <0x170000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@180000 {
|
||||
label = "unused";
|
||||
reg = <0x180000 0xe80000>;
|
||||
precal_art_1000: precal@1000 {
|
||||
reg = <0x1000 0x2f20>;
|
||||
};
|
||||
|
||||
precal_art_5000: precal@5000 {
|
||||
reg = <0x5000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
nand_rootfs: partition@0 {
|
||||
label = "ubi";
|
||||
/* reg defined in 64M/128M variant dts. */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -201,25 +229,19 @@
|
|||
status = "okay";
|
||||
};
|
||||
|
||||
&nand {
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pcie_pins>;
|
||||
perst-gpio = <&tlmm 4 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 40 GPIO_ACTIVE_HIGH>;
|
||||
|
||||
nand@0 {
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
rootfs_part1: partition@0 {
|
||||
label = "rootfs";
|
||||
reg = <0x0 0x4000000>;
|
||||
};
|
||||
|
||||
rootfs_part2: partition@4000000 {
|
||||
label = "unused1";
|
||||
reg = <0x4000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
/* Free slot for use */
|
||||
bridge@0,0 {
|
||||
reg = <0x00000000 0 0 0 0>;
|
||||
#address-cells = <3>;
|
||||
#size-cells = <2>;
|
||||
ranges;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -235,6 +257,15 @@
|
|||
};
|
||||
|
||||
&tlmm {
|
||||
pcie_pins: pcie_pinmux {
|
||||
mux {
|
||||
pins = "gpio2";
|
||||
function = "gpio";
|
||||
output-low;
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
mdio_pins: mdio_pinmux {
|
||||
mux_1 {
|
||||
pins = "gpio6";
|
||||
|
|
@ -270,29 +301,36 @@
|
|||
bias-disable;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
led_pins: led_pinmux {
|
||||
mux {
|
||||
pins = "gpio32", "gpio39", "gpio50";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
output-low;
|
||||
};
|
||||
ðphy0 {
|
||||
qcom,single-led-1000;
|
||||
qcom,single-led-100;
|
||||
qcom,single-led-10;
|
||||
};
|
||||
|
||||
mux_1 {
|
||||
pins = "gpio52";
|
||||
function = "gpio";
|
||||
bias-pull-up;
|
||||
output-high;
|
||||
};
|
||||
ðphy1 {
|
||||
qcom,single-led-1000;
|
||||
qcom,single-led-100;
|
||||
qcom,single-led-10;
|
||||
};
|
||||
|
||||
mux_2 {
|
||||
pins = "gpio61";
|
||||
function = "gpio";
|
||||
bias-pull-down;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
ðphy2 {
|
||||
qcom,single-led-1000;
|
||||
qcom,single-led-100;
|
||||
qcom,single-led-10;
|
||||
};
|
||||
|
||||
ðphy3 {
|
||||
qcom,single-led-1000;
|
||||
qcom,single-led-100;
|
||||
qcom,single-led-10;
|
||||
};
|
||||
|
||||
ðphy4 {
|
||||
qcom,single-led-1000;
|
||||
qcom,single-led-100;
|
||||
qcom,single-led-10;
|
||||
};
|
||||
|
||||
&usb3_ss_phy {
|
||||
|
|
@ -313,10 +351,14 @@
|
|||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "R619AC";
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
nvmem-cells = <&precal_art_1000>;
|
||||
qcom,ath10k-calibration-variant = "P&W R619AC";
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
qcom,ath10k-calibration-variant = "R619AC";
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
nvmem-cells = <&precal_art_5000>;
|
||||
qcom,ath10k-calibration-variant = "P&W R619AC";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,400 @@
|
|||
/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2019, Nguyen Dinh Phi <phi_nguyen@compex.com.sg>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include "qcom-ipq4019.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/soc/qcom,tcsr.h>
|
||||
|
||||
/ {
|
||||
model = "Compex WPJ419";
|
||||
compatible = "compex,wpj419", "qcom,ipq4019";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
ranges;
|
||||
rsvd1@87000000 {
|
||||
/* Reserved for other subsystem */
|
||||
reg = <0x87000000 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
wifi_dump@87500000 {
|
||||
reg = <0x87500000 0x600000>;
|
||||
no-map;
|
||||
};
|
||||
|
||||
rsvd2@87B00000 {
|
||||
/* Reserved for other subsystem */
|
||||
reg = <0x87B00000 0x500000>;
|
||||
no-map;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs-append = " ubi.mtd=ubi root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
soc {
|
||||
pinctrl@1000000 {
|
||||
mdio_pins: mdio_pinmux {
|
||||
mux_1 {
|
||||
pins = "gpio6";
|
||||
function = "mdio";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mux_2 {
|
||||
pins = "gpio7";
|
||||
function = "mdc";
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
serial_0_pins: serial_pinmux {
|
||||
mux {
|
||||
pins = "gpio16", "gpio17";
|
||||
function = "blsp_uart0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
serial_1_pins: serial1_pinmux {
|
||||
mux {
|
||||
pins = "gpio8", "gpio9", "gpio10", "gpio11";
|
||||
function = "blsp_uart1";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
spi_0_pins: spi_0_pinmux {
|
||||
pinmux {
|
||||
function = "blsp_spi0";
|
||||
pins = "gpio13", "gpio14", "gpio15";
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
pinmux_cs {
|
||||
function = "gpio";
|
||||
pins = "gpio12";
|
||||
bias-disable;
|
||||
output-high;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_0_pins: i2c_0_pinmux {
|
||||
mux {
|
||||
pins = "gpio20", "gpio21";
|
||||
function = "blsp_i2c0";
|
||||
bias-disable;
|
||||
};
|
||||
};
|
||||
|
||||
nand_pins: nand_pins {
|
||||
pullups {
|
||||
pins = "gpio52", "gpio53", "gpio58", "gpio59";
|
||||
function = "qpic";
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
pulldowns {
|
||||
pins = "gpio54", "gpio55", "gpio56",
|
||||
"gpio57", "gpio60", "gpio61",
|
||||
"gpio62", "gpio63", "gpio64",
|
||||
"gpio65", "gpio66", "gpio67",
|
||||
"gpio68", "gpio69";
|
||||
function = "qpic";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
|
||||
led_0_pins: led0_pinmux {
|
||||
mux_1 {
|
||||
pins = "gpio36";
|
||||
function = "led0";
|
||||
bias-pull-down;
|
||||
};
|
||||
mux_2 {
|
||||
pins = "gpio40";
|
||||
function = "led4";
|
||||
bias-pull-down;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
blsp_dma: dma@7884000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
spi_0: spi@78b5000 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>, <&tlmm 41 GPIO_ACTIVE_HIGH>;
|
||||
num-cs = <2>;
|
||||
|
||||
flash0@0 {
|
||||
reg = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <24000000>;
|
||||
broken-flash-reset;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:SBL1";
|
||||
reg = <0x000000 0x040000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@40000 {
|
||||
label = "0:MIBIB";
|
||||
reg = <0x040000 0x020000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "0:QSEE";
|
||||
reg = <0x060000 0x060000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c0000 {
|
||||
label = "0:CDT";
|
||||
reg = <0x0c0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@d0000 {
|
||||
label = "0:DDRPARAMS";
|
||||
reg = <0x0d0000 0x010000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@e0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x0e0000 0x010000>;
|
||||
};
|
||||
|
||||
partition@f0000 {
|
||||
label = "u-boot";
|
||||
reg = <0x0f0000 0x080000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@170000 {
|
||||
label = "0:ART";
|
||||
reg = <0x170000 0x010000>;
|
||||
read-only;
|
||||
compatible = "nvmem-cells";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
precal_art_1000: precal@1000 {
|
||||
reg = <0x1000 0x2f20>;
|
||||
};
|
||||
|
||||
precal_art_5000: precal@5000 {
|
||||
reg = <0x5000 0x2f20>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
nand@1 {
|
||||
reg = <1>;
|
||||
status = "okay";
|
||||
compatible = "spi-nand";
|
||||
spi-max-frequency = <24000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
/* The device has 128MB, but we can only address
|
||||
* 64MB because of the bootloader's default settings.
|
||||
* This is due to the old mt29f driver,
|
||||
* which detected the deivce with only 64MB
|
||||
*/
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x0000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mdio@90000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <5000>;
|
||||
};
|
||||
|
||||
ess-psgmii@98000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tcsr@194b000 {
|
||||
/* select hostmode */
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x194b000 0x100>;
|
||||
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
tcsr@1949000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1949000 0x100>;
|
||||
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
|
||||
};
|
||||
|
||||
ess_tcsr@1953000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1953000 0x1000>;
|
||||
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
|
||||
};
|
||||
|
||||
tcsr@1957000 {
|
||||
compatible = "qcom,tcsr";
|
||||
reg = <0x1957000 0x100>;
|
||||
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
|
||||
};
|
||||
|
||||
i2c_0: i2c@78b7000 {
|
||||
pinctrl-0 = <&i2c_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@78af000 {
|
||||
pinctrl-0 = <&serial_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
serial@78b0000 {
|
||||
pinctrl-0 = <&serial_1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3_ss_phy: ssphy@9a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3_hs_phy: hsphy@a6000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3: usb3@8af8800 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2_hs_phy: hsphy@a8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb2: usb2@60f8800 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
cryptobam: dma@8e04000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
crypto@8e3a000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
watchdog@b017000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
ess-switch@c000000 {
|
||||
switch_lan_bmp = <0x1e>;
|
||||
switch_wan_bmp = <0x20>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
edma@c080000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
qpic_bam: dma@7984000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pcie0: pci@40000000 {
|
||||
status = "okay";
|
||||
perst-gpio = <&tlmm 38 GPIO_ACTIVE_LOW>;
|
||||
wake-gpio = <&tlmm 50 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
nand: nand-controller@79b0000 {
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gmac0 {
|
||||
qcom,phy_mdio_addr = <4>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,forced_speed = <1000>;
|
||||
qcom,forced_duplex = <1>;
|
||||
vlan_tag = <2 0x20>;
|
||||
};
|
||||
|
||||
&gmac1 {
|
||||
qcom,phy_mdio_addr = <3>;
|
||||
qcom,poll_required = <1>;
|
||||
qcom,forced_speed = <1000>;
|
||||
qcom,forced_duplex = <1>;
|
||||
vlan_tag = <1 0x10>;
|
||||
};
|
||||
|
||||
&wifi0 {
|
||||
status = "okay";
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
nvmem-cells = <&precal_art_1000>;
|
||||
};
|
||||
|
||||
&wifi1 {
|
||||
status = "okay";
|
||||
nvmem-cell-names = "pre-calibration";
|
||||
nvmem-cells = <&precal_art_5000>;
|
||||
};
|
||||
Loading…
Add table
Add a link
Reference in a new issue