Add DTS for all RUTX devices

6.1/target/linux/ipq40xx/dts/platform_name.dtsi

@@ -0,0 +1 @@
+/ { platform = "RUTX"; }; 

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-08.dts

@@ -0,0 +1,24 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX08";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-08_STM32.dts

@@ -0,0 +1,26 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX08 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-09.dts

@@ -0,0 +1,106 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX09";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-09_STM32.dts

@@ -0,0 +1,108 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX09 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-10.dts

@@ -0,0 +1,38 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX10";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-10_STM32.dts

@@ -0,0 +1,40 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX10 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-11.dts

@@ -0,0 +1,121 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX11";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-11_STM32.dts

@@ -0,0 +1,123 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX11 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-12.dts

@@ -0,0 +1,148 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX12";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 16 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 17 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_reset {
+				gpio-export,name = "modem2_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 18 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_power {
+				gpio-export,name = "modem2_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_2 {
+				label = "mob2_gen_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_3 {
+				label = "mob2_gen_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_4 {
+				label = "mob2_gen_4";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_1 {
+				label = "mob2_ssid_1";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_3 {
+				label = "mob2_ssid_3";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_5 {
+				label = "mob2_ssid_5";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 23 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-12_STM32.dts

@@ -0,0 +1,150 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX12 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_reset {
+				gpio-export,name = "modem2_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_power {
+				gpio-export,name = "modem2_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_2 {
+				label = "mob2_gen_2";
+				gpios = <&stm32_io 32 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_3 {
+				label = "mob2_gen_3";
+				gpios = <&stm32_io 33 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_4 {
+				label = "mob2_gen_4";
+				gpios = <&stm32_io 34 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_1 {
+				label = "mob2_ssid_1";
+				gpios = <&stm32_io 31 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_3 {
+				label = "mob2_ssid_3";
+				gpios = <&stm32_io 30 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_5 {
+				label = "mob2_ssid_5";
+				gpios = <&stm32_io 29 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-14.dts

@@ -0,0 +1,98 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX14";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-14_STM32.dts

@@ -0,0 +1,100 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX14 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-50.dts

@@ -0,0 +1,110 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX50";
+
+	soc {
+		
+		ext_io {
+			shift_io: shift_io@0 {
+				registers-number = <2>;
+			};
+		};
+
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_5 {
+				label = "mob_gen_5";
+				gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-R1.dts

@@ -0,0 +1,83 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+#include "qcom-ipq4018-rutx-i2c.dtsi" // SFP
+
+/ {
+	model = "RUTXR1";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_mob {
+				label = "wan_mob_5";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-R1_STM32.dts

@@ -0,0 +1,82 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTXR1 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_mob {
+				label = "wan_mob_5";
+				gpios = <&stm32_io 16 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-STM32.dtsi

@@ -0,0 +1,21 @@
+#include "qcom-ipq4018-rutx-common.dtsi"
+#include "qcom-ipq4018-rutx-i2c.dtsi"
+
+/ {
+	io_expander = "stm32";
+
+	soc {
+		i2c_0: i2c@78b7000 {
+			stm32_io: stm32@74 {
+				#gpio-cells = <2>;
+				compatible = "tlt,stm32v1";
+				reg = <0x74>;
+				gpio-controller;
+				interrupt-parent = <&tlmm>;
+				interrupts = <5 2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-common.dtsi

@@ -0,0 +1,84 @@
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "platform_name.dtsi"
+
+/ {
+	compatible = "teltonika,rutx", "qcom,ap-dk01.1-c2", "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	soc {
+		mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 62 0>;
+
+			ethphy4: ethernet-phy@4 {
+				qcom,fiber-enable;
+			};
+		};
+
+		pinctrl@1000000 {
+			mdio_pins: mdio_pinmux {
+				mux_1 {
+					pins = "gpio53";
+					function = "mdio";
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio52";
+					function = "mdc";
+					bias-pull-up;
+				};
+			};
+		};
+
+		spi_0: spi@78b5000 {
+			cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
+			num-cs = <2>;
+
+			mx25l25635f@0 {
+				compatible = "n25q128a11", "mx25l25635f", "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				spi-max-frequency = <24000000>;
+			};
+
+			mt29f@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spi-nand","spinand,mt29f";
+				reg = <1>;
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+
+			reset {
+				label = "reset";
+				gpios = <&tlmm 4 1>;
+				linux,code = <0x198>;
+			};
+		};
+
+		usb3: usb3@8af8800 {
+			dwc3@8a00000 {
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usb2: usb2@60f8800 {
+			dwc3@6000000 {
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-i2c.dtsi

@@ -0,0 +1,20 @@
+/ {
+	soc {
+		pinctrl@1000000 {
+			i2c_0_pins: i2c_0_pinmux {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "blsp_i2c0";
+					bias-disable;
+				};
+			};
+		};
+
+		i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			clock-frequency = <400000>;
+			status = "ok";
+		};
+	};
+};

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-shiftreg.dtsi

@@ -0,0 +1,27 @@
+#include "qcom-ipq4018-rutx-common.dtsi"
+
+/ {
+	io_expander = "shiftreg_1";
+
+	soc {
+		ext_io {
+			compatible = "spi-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>;  // SRCLK
+			gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>; // SER
+			cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;  // RCLK
+			num-chipselects = <1>;
+
+			shift_io: shift_io@0 {
+				compatible = "fairchild,74hc595";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				registers-number = <3>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+	};
+};

6.1/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx.dtsi

@@ -1,287 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-ap.dk01.1.dtsi"
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x10000000>;
-	};
-
-	soc {
-		pinctrl@1000000 {
-			mdio_pins: mdio_pinmux {
-				mux_1 {
-					pins = "gpio53";
-					function = "mdio";
-					bias-pull-up;
-				};
-				mux_2 {
-					pins = "gpio52";
-					function = "mdc";
-					bias-pull-up;
-				};
-			};
-
-			i2c_0_pins: i2c_0_pinmux {
-				mux {
-					pins = "gpio58", "gpio59";
-					function = "blsp_i2c0";
-					bias-disable;
-				};
-			};
-		};
-
-		keys {
-			compatible = "gpio-keys";
-
-			reset {
-				label = "reset";
-				gpios = <&tlmm 4 1>;
-				linux,code = <KEY_RESTART>;
-			};
-		};
-
-		gpio_export {
-			compatible = "gpio-export";
-			#size-cells = <0>;
-
-			gpio_out {
-				gpio-export,name = "gpio_out";
-				gpio-export,output = <0>;
-				gpio-export,direction_may_change = <0>;
-				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
-			};
-
-			gpio_in {
-				gpio-export,name = "gpio_in";
-				gpio-export,input = <0>;
-				gpio-export,direction_may_change = <0>;
-				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
-			};
-		};
-	};
-};
-
-&blsp1_i2c3 {
-	status = "okay";
-	pinctrl-0 = <&i2c_0_pins>;
-	pinctrl-names = "default";
-	clock-frequency = <400000>;
-
-	stm32_io: stm32@74 {
-		compatible = "tlt,stm32v1";
-		#gpio-cells = <2>;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		interrupt-controller;
-		interrupt-parent = <&tlmm>;
-		interrupts = <5 2>;
-		reg = <0x74>;
-	};
-};
-
-&blsp1_spi1 {
-	cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
-	num-cs = <2>;
-
-	xt25f128b@0 {
-		/*
-		 * Factory U-boot looks in 0:BOOTCONFIG partition for active
-		 * partitions settings and mangles the partition config so
-		 * 0:QSEE/0:QSEE_1, 0:CDT/0:CDT_1 and  0:APPSBL/0:APPSBL_1 pairs
-		 * can be swaped. It isn't a problem but we never can be sure where
-		 * OFW put factory images. "n25q128a11" is required for proper nor
-		 * recognition in u-boot.
-		 */
-		compatible = "jedec,spi-nor", "n25q128a11";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "0:SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "0:MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "0:BOOTCONFIG";
-				reg = <0x60000 0x20000>;
-				read-only;
-			};
-
-			partition@80000 {
-				label = "0:BOOTCONFIG1";
-				reg = <0x80000 0x20000>;
-				read-only;
-			};
-
-			partition@a0000 {
-				label = "0:QSEE";
-				reg = <0xa0000 0x60000>;
-				read-only;
-			};
-
-			partition@100000 {
-				label = "0:QSEE_1";
-				reg = <0x100000 0x60000>;
-				read-only;
-			};
-
-			partition@160000 {
-				label = "0:CDT";
-				reg = <0x160000 0x10000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "0:CDT_1";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "0:DDRPARAMS";
-				reg = <0x180000 0x10000>;
-				read-only;
-			};
-
-			partition@190000 {
-				label = "0:APPSBLENV";
-				reg = <0x190000 0x10000>;
-				read-only;
-			};
-
-			partition@1a0000 {
-				label = "0:APPSBL";
-				reg = <0x1a0000 0xa0000>;
-				read-only;
-			};
-
-			partition@240000 {
-				label = "0:APPSBL_1";
-				reg = <0x240000 0xa0000>;
-				read-only;
-			};
-
-			partition@2e0000 {
-				label = "0:ART";
-				reg = <0x2e0000 0x10000>;
-				read-only;
-			};
-
-			config: partition@2f0000 {
-				label = "0:CONFIG";
-				reg = <0x2f0000 0x10000>;
-				read-only;
-			};
-
-			partition@300000 {
-				label = "0:CONFIG_RW";
-				reg = <0x300000 0x10000>;
-				read-only;
-			};
-
-			partition@310000 {
-				label = "0:EVENTSLOG";
-				reg = <0x310000 0x90000>;
-				read-only;
-			};
-		};
-	};
-
-	xt26g02a@1 {
-		/*
-		 * Factory U-boot looks in 0:BOOTCONFIG partition for active
-		 * partitions settings and mangles the partition config so
-		 * rootfs/rootfs_1 pairs can be swaped.
-		 * It isn't a problem but we never can be sure where OFW put
-		 * factory images. "spinand,mt29f" value is required for proper
-		 * nand recognition in u-boot.
-		 */
-		compatible = "spi-nand", "spinand,mt29f";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <1>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "rootfs_1";
-				reg = <0x00000000 0x08000000>;
-			};
-
-			partition@8000000 {
-				label = "rootfs";
-				reg = <0x08000000 0x08000000>;
-			};
-		};
-	};
-};
-
-&mdio {
-	status = "okay";
-	pinctrl-0 = <&mdio_pins>;
-	pinctrl-names = "default";
-	phy-reset-gpio = <&tlmm 62 0>;
-};
-
-&wifi0 {
-	nvmem-cell-names = "pre-calibration", "mac-address";
-	nvmem-cells = <&precal_art_1000>, <&macaddr_config_0>;
-	mac-address-increment = <2>;
-};
-
-&wifi1 {
-	nvmem-cell-names = "pre-calibration", "mac-address";
-	nvmem-cells = <&precal_art_5000>, <&macaddr_config_0>;
-	mac-address-increment = <3>;
-};
-
-&gmac {
-	status = "okay";
-};
-
-&switch {
-	status = "okay";
-};
-
-&swport2 {
-	status = "okay";
-	label = "lan1";
-};
-
-&swport3 {
-	status = "okay";
-	label = "lan2";
-};
-
-&swport4 {
-	status = "okay";
-	label = "lan3";
-};
-
-&swport5 {
-	status = "okay";
-	label = "wan";
-};

6.1/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-rutx12.dts

@@ -1,36 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4018-rutx.dtsi"
-
-/ {
-	model = "Teltonika RUTX12";
-	compatible = "teltonika,rutx12";
-
-	soc {
-		leds {
-			compatible = "gpio-leds";
-
-			wifi2g {
-				label = "green:wifi2g";
-				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy0tpt";
-			};
-
-			wifi5g {
-				label = "green:wifi5g";
-				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
-				linux,default-trigger = "phy1tpt";
-			};
-		};
-	};
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Teltonika-RUTX12";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "Teltonika-RUTX12";
-};

6.1/target/linux/ipq40xx/image/generic.mk

@@ -58,6 +58,19 @@ define Build/append-rutx-metadata
 		}' | fwtool -I - $@
 endef
 
+define Build/fit-rutx
+	$(TOPDIR)/scripts/mkits-rutx.sh \
+                -D $(DEVICE_NAME) -o $@.its -k $@ \
+                $(if $(word 2,$(1)),-d $(word 2,$(1))) -C $(word 1,$(1)) \
+                -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+                $(if $(DEVICE_FDT_NUM),-n $(DEVICE_FDT_NUM)) \
+                -c $(if $(DEVICE_DTS_CONFIG),$(DEVICE_DTS_CONFIG),"config@1") \
+                -A $(LINUX_KARCH) -v $(LINUX_VERSION)
+	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+	@mv $@.new $@
+endef
+
+
 define Build/copy-file
 	cat "$(1)" > "$@"
 endef
@@ -1089,7 +1102,31 @@ define Device/teltonika_rutx12
 	DEVICE_PACKAGES := kmod-bluetooth
 endef
 # Missing DSA Setup
-TARGET_DEVICES += teltonika_rutx12
+#TARGET_DEVICES += teltonika_rutx12
+
+define Device/teltonika_rutx
+        $(call Device/FitImage)
+        $(call Device/UbiFit)
+        DEVICE_VENDOR := Teltonika
+        DEVICE_MODEL := RUTX
+        BOARD_NAME := rutx
+        SOC := qcom-ipq4018
+        DEVICE_DTS_DIR := ../dts
+        DEVICE_DTS := $(foreach dts,$(notdir $(wildcard $(PLATFORM_DIR)/dts/*.dts)),$(patsubst %.dts,%,$(dts)))
+        DEVICE_DTS_CONFIG := config@5
+        KERNEL = kernel-bin | gzip | fit-rutx gzip "$$(KDIR)/{$$(subst $$(space),$$(comma),$$(addprefix image-,$$(addsuffix .dtb,$$(DEVICE_DTS))))}"
+        KERNEL_INSTALL := 1
+        BLOCKSIZE := 128k
+        PAGESIZE := 2048
+        FILESYSTEMS := squashfs
+        KERNEL_IN_UBI := 1
+        IMAGES := sysupgrade.bin
+        IMAGE/sysupgrade.bin := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+        #DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth kmod-r2ec sysupgrade-helper
+        DEVICE_PACKAGES := ipq-wifi-teltonika_rutx kmod-bluetooth sysupgrade-helper
+        HW_SUPPORT := io_expander%stm32:shiftreg_1
+endef
+TARGET_DEVICES += teltonika_rutx
 
 define Device/tel_x1pro
 	$(call Device/FitImage)

6.1/target/linux/ipq40xx/patches-6.1/708-arm-dts-ipq4019-QCA807x-properties.patch

@@ -20,7 +20,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
  
  / {
  	#address-cells = <1>;
-@@ -726,22 +727,38 @@
+@@ -598,22 +599,39 @@
  
  			ethphy0: ethernet-phy@0 {
  				reg = <0>;
@@ -56,6 +56,7 @@ Signed-off-by: Robert Marko <robert.marko@sartura.hr>
 +				reg = <5>;
 +
 +				qcom,tx-driver-strength = <PSGMII_QSGMII_TX_DRIVER_300MV>;
++				qcom,psgmii-az;
  			};
  		};
  

6.1/target/linux/ipq40xx/patches-6.1/900-dts-ipq4019-ap-dk01.1.patch

@@ -0,0 +1,158 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -15,6 +15,7 @@
+  */
+ 
+ #include "qcom-ipq4019.dtsi"
++#include <dt-bindings/soc/qcom,tcsr.h>
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK01.1";
+@@ -29,6 +30,32 @@
+ 	};
+ 
+ 	soc {
++		tcsr@194b000 {
++			/* select hostmode */
++			compatible = "qcom,tcsr";
++			reg = <0x194b000 0x100>;
++			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
++			status = "okay";
++		};
++
++		ess_tcsr@1953000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1953000 0x1000>;
++			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
++		};
++
++		tcsr@1949000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1949000 0x100>;
++			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
++		};
++
++		tcsr@1957000 {
++			compatible = "qcom,tcsr";
++			reg = <0x1957000 0x100>;
++			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
++		};
++
+ 		rng@22000 {
+ 			status = "ok";
+ 		};
+@@ -74,14 +101,6 @@
+ 			pinctrl-names = "default";
+ 			status = "okay";
+ 			cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+-
+-			mx25l25635e@0 {
+-				#address-cells = <1>;
+-				#size-cells = <1>;
+-				reg = <0>;
+-				compatible = "mx25l25635e";
+-				spi-max-frequency = <24000000>;
+-			};
+ 		};
+ 
+ 		serial@78af000 {
+@@ -109,5 +128,22 @@
+ 		wifi@a800000 {
+ 			status = "ok";
+ 		};
++
++		mdio@90000 {
++			status = "okay";
++		};
++
++		ess-switch@c000000 {
++			status = "okay";
++		};
++
++		ess-psgmii@98000 {
++			status = "okay";
++		};
++
++		edma@c080000 {
++			status = "okay";
++		};
++
+ 	};
+ };
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -18,5 +18,73 @@
+ 
+ / {
+ 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
+-	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019";
++	compatible = "qcom,ipq4019-ap-dk01.1-c1", "qcom,ipq4019", "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1";
++
++	memory {
++		device_type = "memory";
++		reg = <0x80000000 0x10000000>;
++	};
++};
++
++&blsp1_spi1 {
++	mx25l25635f@0 {
++		compatible = "mx25l25635f", "jedec,spi-nor";
++		#address-cells = <1>;
++		#size-cells = <1>;
++		reg = <0>;
++		spi-max-frequency = <24000000>;
++
++		SBL1@0 {
++			label = "SBL1";
++			reg = <0x0 0x40000>;
++			read-only;
++		};
++		MIBIB@40000 {
++			label = "MIBIB";
++			reg = <0x40000 0x20000>;
++			read-only;
++		};
++		QSEE@60000 {
++			label = "QSEE";
++			reg = <0x60000 0x60000>;
++			read-only;
++		};
++		CDT@c0000 {
++			label = "CDT";
++			reg = <0xc0000 0x10000>;
++			read-only;
++		};
++		DDRPARAMS@d0000 {
++			label = "DDRPARAMS";
++			reg = <0xd0000 0x10000>;
++			read-only;
++		};
++		APPSBLENV@e0000 {
++			label = "APPSBLENV";
++			reg = <0xe0000 0x10000>;
++			read-only;
++		};
++		APPSBL@f0000 {
++			label = "APPSBL";
++			reg = <0xf0000 0x80000>;
++			read-only;
++		};
++		ART@170000 {
++			label = "ART";
++			reg = <0x170000 0x10000>;
++			read-only;
++		};
++		kernel@180000 {
++			label = "kernel";
++			reg = <0x180000 0x400000>;
++		};
++		rootfs@580000 {
++			label = "rootfs";
++			reg = <0x580000 0x1600000>;
++		};
++		firmware@180000 {
++			label = "firmware";
++			reg = <0x180000 0x1a00000>;
++		};
++	};
+ };

6.1/target/linux/ipq40xx/patches-6.1/902-dts-ipq4019-ap-dk04.1.patch

@@ -0,0 +1,129 @@
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+@@ -17,53 +17,79 @@
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
+-	memory {
+-		device_type = "memory";
+-		reg = <0x80000000 0x10000000>; /* 256MB */
+-	};
+-
+ 	soc {
++		rng@22000 {
++			status = "okay";
++		};
++
+ 		pinctrl@1000000 {
+ 			serial_0_pins: serial0-pinmux {
+-				pins = "gpio16", "gpio17";
+-				function = "blsp_uart0";
+-				bias-disable;
++				mux {
++					pins = "gpio16", "gpio17";
++					function = "blsp_uart0";
++					bias-disable;
++				};
+ 			};
+ 
+ 			serial_1_pins: serial1-pinmux {
+-				pins = "gpio8", "gpio9",
+-					"gpio10", "gpio11";
+-				function = "blsp_uart1";
+-				bias-disable;
++				mux {
++					pins = "gpio8", "gpio9";
++					function = "blsp_uart1";
++					bias-disable;
++				};
+ 			};
+ 
+ 			spi_0_pins: spi-0-pinmux {
+ 				pinmux {
+ 					function = "blsp_spi0";
+ 					pins = "gpio13", "gpio14", "gpio15";
+-					bias-disable;
+ 				};
+ 				pinmux_cs {
+ 					function = "gpio";
+ 					pins = "gpio12";
++				};
++				pinconf {
++					pins = "gpio13", "gpio14", "gpio15";
++					drive-strength = <12>;
++					bias-disable;
++				};
++				pinconf_cs {
++					pins = "gpio12";
++					drive-strength = <2>;
+ 					bias-disable;
+ 					output-high;
+ 				};
+ 			};
+ 
+ 			i2c_0_pins: i2c-0-pinmux {
+-				pins = "gpio20", "gpio21";
+-				function = "blsp_i2c0";
+-				bias-disable;
++				pinmux {
++					function = "blsp_i2c0";
++					pins = "gpio10", "gpio11";
++				};
++				pinconf {
++					pins = "gpio10", "gpio11";
++					drive-strength = <16>;
++					bias-disable;
++				};
+ 			};
+ 
+ 			nand_pins: nand-pins {
+-				pins = "gpio53", "gpio55", "gpio56",
+-					"gpio57", "gpio58", "gpio59",
+-					"gpio60", "gpio62", "gpio63",
+-					"gpio64", "gpio65", "gpio66",
+-					"gpio67", "gpio68", "gpio69";
+-				function = "qpic";
++				pullups {
++					pins = "gpio52", "gpio53", "gpio58",
++						"gpio59";
++					function = "qpic";
++					bias-pull-up;
++				};
++
++				pulldowns {
++					pins = "gpio54", "gpio55", "gpio56",
++						"gpio57", "gpio60", "gpio61",
++						"gpio62", "gpio63", "gpio64",
++						"gpio65", "gpio66", "gpio67",
++						"gpio68", "gpio69";
++					function = "qpic";
++					bias-pull-down;
++				};
+ 			};
+ 		};
+ 
+@@ -103,9 +129,24 @@
+ 			perst-gpio = <&tlmm 38 0x1>;
+ 		};
+ 
++		i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
++			pinctrl-0 = <&i2c_0_pins>;
++			pinctrl-names = "default";
++
++			status = "okay";
++		};
++
+ 		qpic-nand@79b0000 {
+ 			pinctrl-0 = <&nand_pins>;
+ 			pinctrl-names = "default";
+ 		};
++
++		crypto@8e3a000 {
++			status = "okay";
++		};
++
++		watchdog@b017000 {
++			status = "okay";
++		};
+ 	};
+ };