Add DTS for all RUTX devices

6.1/target/linux/ipq40xx/dts/qcom-ipq4018-rutx-common.dtsi

@@ -0,0 +1,84 @@
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "platform_name.dtsi"
+
+/ {
+	compatible = "teltonika,rutx", "qcom,ap-dk01.1-c2", "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	soc {
+		mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 62 0>;
+
+			ethphy4: ethernet-phy@4 {
+				qcom,fiber-enable;
+			};
+		};
+
+		pinctrl@1000000 {
+			mdio_pins: mdio_pinmux {
+				mux_1 {
+					pins = "gpio53";
+					function = "mdio";
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio52";
+					function = "mdc";
+					bias-pull-up;
+				};
+			};
+		};
+
+		spi_0: spi@78b5000 {
+			cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
+			num-cs = <2>;
+
+			mx25l25635f@0 {
+				compatible = "n25q128a11", "mx25l25635f", "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				spi-max-frequency = <24000000>;
+			};
+
+			mt29f@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spi-nand","spinand,mt29f";
+				reg = <1>;
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+
+			reset {
+				label = "reset";
+				gpios = <&tlmm 4 1>;
+				linux,code = <0x198>;
+			};
+		};
+
+		usb3: usb3@8af8800 {
+			dwc3@8a00000 {
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usb2: usb2@60f8800 {
+			dwc3@6000000 {
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+	};
+};