fixx

config-rpi2

@@ -6,4 +6,3 @@ CONFIG_PACKAGE_kmod-ath9k=y
 CONFIG_PACKAGE_bcm27xx-eeprom=y
 CONFIG_PACKAGE_bcm27xx-userland=y
 CONFIG_KERNEL_ARM_MODULE_PLTS=y
-CONFIG_KERNEL_TCP_CONG_BBR=y

root/include/netfilter.mk

@@ -157,7 +157,7 @@ $(eval $(if $(NF_KMOD),$(call nf_add,NF_CONNTRACK,CONFIG_NF_DEFRAG_IPV6, $(P_V6)
 
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_FILTER, $(P_V6)ip6table_filter),))
 $(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_MANGLE, $(P_V6)ip6table_mangle),))
-$(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_NF_LOG_IPV6, $(P_V6)nf_log_ipv6),lt 5.13))
+$(eval $(if $(NF_KMOD),$(call nf_add,IPT_IPV6,CONFIG_NF_LOG_IPV6, $(P_V6)nf_log_ipv6,lt 5.13),))
 
 $(eval $(if $(NF_KMOD),,$(call nf_add,IPT_IPV6,CONFIG_IP6_NF_IPTABLES, ip6t_icmp6)))
 

root/package/Makefile

@@ -0,0 +1,114 @@
+#
+# Copyright (C) 2006-2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+curdir:=package
+
+include $(INCLUDE_DIR)/feeds.mk
+include $(INCLUDE_DIR)/rootfs.mk
+
+-include $(TMP_DIR)/.packagedeps
+package-y += kernel/linux
+$(curdir)/autoremove:=1
+$(curdir)/builddirs:=$(sort $(package-) $(package-y) $(package-m))
+$(curdir)/builddirs-default:=. $(sort $(package-y) $(package-m))
+$(curdir)/builddirs-prereq:=. $(sort $(prereq-y) $(prereq-m))
+ifdef CHECK_ALL
+$(curdir)/builddirs-check:=$($(curdir)/builddirs)
+$(curdir)/builddirs-download:=$($(curdir)/builddirs)
+endif
+ifneq ($(IGNORE_ERRORS),)
+  package-y-filter := $(package-y)
+  package-m-filter := $(filter-out $(package-y),$(package-m))
+  package-n-filter := $(filter-out $(package-y) $(package-m),$(package-))
+  package-ignore-errors := $(filter n m y,$(IGNORE_ERRORS))
+  package-ignore-errors := $(if $(package-ignore-errors),$(package-ignore-errors),n m)
+  package-ignore-subdirs := $(sort $(foreach m,$(package-ignore-errors),$(package-$(m)-filter)))
+  $(curdir)/builddirs-ignore-download := $(package-ignore-subdirs)
+  $(curdir)/builddirs-ignore-compile := $(package-ignore-subdirs)
+  $(curdir)/builddirs-ignore-host-download := $(package-ignore-subdirs)
+  $(curdir)/builddirs-ignore-host-compile := $(package-ignore-subdirs)
+endif
+
+PACKAGE_INSTALL_FILES:= \
+	$(foreach pkg,$(sort $(package-y)), \
+		$(foreach variant, \
+			$(if $(strip $(package/$(pkg)/variants)), \
+				$(package/$(pkg)/variants), \
+				$(if $(package/$(pkg)/default-variant), \
+					$(package/$(pkg)/default-variant), \
+					default \
+				) \
+			), \
+			$(PKG_INFO_DIR)/$(lastword $(subst /,$(space),$(pkg))).$(variant).install \
+		) \
+	)
+
+$(curdir)/cleanup: $(TMP_DIR)/.build
+	rm -rf $(STAGING_DIR_ROOT)
+
+$(curdir)/merge:
+	rm -rf $(PACKAGE_DIR_ALL)
+	mkdir -p $(PACKAGE_DIR_ALL)
+	-$(foreach pdir,$(PACKAGE_SUBDIRS),$(if $(wildcard $(pdir)/*.ipk),ln -s $(pdir)/*.ipk $(PACKAGE_DIR_ALL);))
+
+$(curdir)/merge-index: $(curdir)/merge
+	(cd $(PACKAGE_DIR_ALL) && $(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages; )
+
+ifndef SDK
+  $(curdir)/compile: $(curdir)/system/opkg/host/compile
+endif
+
+$(curdir)/install: $(TMP_DIR)/.build $(curdir)/merge $(if $(CONFIG_TARGET_PER_DEVICE_ROOTFS),$(curdir)/merge-index)
+	- find $(STAGING_DIR_ROOT) -type d | $(XARGS) chmod 0755
+	rm -rf $(TARGET_DIR) $(TARGET_DIR_ORIG)
+	mkdir -p $(TARGET_DIR)/tmp
+	$(file >$(TMP_DIR)/opkg_install_list,\
+	  $(call opkg_package_files,\
+	    $(foreach pkg,$(shell cat $(PACKAGE_INSTALL_FILES) 2>/dev/null),$(pkg)$(call GetABISuffix,$(pkg)))))
+	$(call opkg,$(TARGET_DIR)) install $$(cat $(TMP_DIR)/opkg_install_list)
+	@for file in $(PACKAGE_INSTALL_FILES); do \
+		[ -s $$file.flags ] || continue; \
+		for flag in `cat $$file.flags`; do \
+			$(call opkg,$(TARGET_DIR)) flag $$flag `cat $$file`; \
+		done; \
+	done || true
+
+	$(CP) $(TARGET_DIR) $(TARGET_DIR_ORIG)
+
+	$(call prepare_rootfs,$(TARGET_DIR),$(TOPDIR)/files)
+
+$(curdir)/index: FORCE
+	@echo Generating package index...
+	@for d in $(PACKAGE_SUBDIRS); do ( \
+		mkdir -p $$d; \
+		cd $$d || continue; \
+		$(SCRIPT_DIR)/ipkg-make-index.sh . 2>&1 > Packages.manifest; \
+		grep -vE '^(Maintainer|LicenseFiles|Source|SourceName|Require|SourceDateEpoch)' Packages.manifest > Packages; \
+		case "$$(((64 + $$(stat -L -c%s Packages)) % 128))" in 110|111) \
+			$(call ERROR_MESSAGE,WARNING: Applying padding in $$d/Packages to workaround usign SHA-512 bug!); \
+			{ echo ""; echo ""; } >> Packages;; \
+		esac; \
+		gzip -9nc Packages > Packages.gz; \
+	); done
+ifdef CONFIG_SIGNED_PACKAGES
+	@echo Signing package index...
+	@for d in $(PACKAGE_SUBDIRS); do ( \
+		[ -d $$d ] && \
+			cd $$d || continue; \
+		$(STAGING_DIR_HOST)/bin/usign -S -m Packages -s $(BUILD_KEY); \
+	); done
+endif
+
+$(curdir)/flags-install:= -j1
+
+$(eval $(call stampfile,$(curdir),package,prereq,.config))
+$(eval $(call stampfile,$(curdir),package,cleanup,$(TMP_DIR)/.build))
+$(eval $(call stampfile,$(curdir),package,compile,$(TMP_DIR)/.build))
+$(eval $(call stampfile,$(curdir),package,install,$(TMP_DIR)/.build))
+$(eval $(call stampfile,$(curdir),package,check,$(TMP_DIR)/.build))
+
+$(eval $(call subdir,$(curdir)))

root/package/base-files/files/bin/config_generate

@@ -7,58 +7,25 @@ CFG=/etc/board.json
 [ -s $CFG ] || /bin/board_detect || exit 1
 [ -s /etc/config/network -a -s /etc/config/system ] && exit 0
 
-generate_bridge() {
-	local name=$1
-	local macaddr=$2
-	uci -q batch <<-EOF
-		set network.$name=device
-		set network.$name.name=$name
-		set network.$name.type=bridge
-	EOF
-	if [ -n "$macaddr" ]; then
-		uci -q batch <<-EOF
-			set network.$name.macaddr=$macaddr
-		EOF
-	fi
-}
-
-bridge_vlan_id=0
-generate_bridge_vlan() {
-	local name=$1_vlan
-	local device=$2
-	local ports="$3"
-	local vlan="$4"
-	uci -q batch <<-EOF
-		set network.$name=bridge-vlan
-		set network.$name.device='$device'
-		set network.$name.vlan='$vlan'
-		set network.$name.ports='$ports'
-	EOF
-}
-
 generate_static_network() {
 	uci -q batch <<-EOF
 		delete network.loopback
 		set network.loopback='interface'
-		set network.loopback.device='lo'
+		set network.loopback.ifname='lo'
 		set network.loopback.proto='static'
 		set network.loopback.ipaddr='127.0.0.1'
 		set network.loopback.netmask='255.0.0.0'
+		delete network.globals
+		set network.globals='globals'
+		set network.globals.ula_prefix='auto'
 	EOF
-		[ -e /proc/sys/net/ipv6 ] && {
-			uci -q batch <<-EOF
-				delete network.globals
-				set network.globals='globals'
-				set network.globals.ula_prefix='auto'
-			EOF
-		}
 
 	if json_is_a dsl object; then
 		json_select dsl
 			if json_is_a atmbridge object; then
 				json_select atmbridge
-					local vpi vci encaps payload nameprefix
-					json_get_vars vpi vci encaps payload nameprefix
+					local vpi vci encaps payload
+					json_get_vars vpi vci encaps payload
 					uci -q batch <<-EOF
 						delete network.atm
 						set network.atm='atm-bridge'
@@ -66,7 +33,6 @@ generate_static_network() {
 						set network.atm.vci='$vci'
 						set network.atm.encaps='$encaps'
 						set network.atm.payload='$payload'
-						set network.atm.nameprefix='$nameprefix'
 					EOF
 				json_select ..
 			fi
@@ -91,69 +57,41 @@ generate_static_network() {
 
 addr_offset=2
 generate_network() {
-	local ports device macaddr protocol type ipaddr netmask vlan
-	local bridge=$2
+	local ifname macaddr protocol type ipaddr netmask
 
 	json_select network
 		json_select "$1"
-			json_get_vars device macaddr protocol ipaddr netmask vlan
-			json_get_values ports ports
+			json_get_vars ifname macaddr protocol ipaddr netmask
 		json_select ..
 	json_select ..
 
-	[ -n "$device" -o -n "$ports" ] || return
+	[ -n "$ifname" ] || return
 
-	# Force bridge for "lan" as it may have other devices (e.g. wireless)
-	# bridged
-	[ "$1" = "lan" -a -z "$ports" ] && {
-		ports="$device"
-	}
-
-	[ -n "$ports" -a -z "$bridge" ] && {
-		uci -q batch <<-EOF
-			add network device
-			set network.@device[-1].name='br-$1'
-			set network.@device[-1].type='bridge'
-		EOF
-		for port in $ports; do uci add_list network.@device[-1].ports="$port"; done
-		[ -n "$macaddr" ] && {
-			for port in $ports; do
-				uci -q batch <<-EOF
-					add network device
-					set network.@device[-1].name='$port'
-					set network.@device[-1].macaddr='$macaddr'
-				EOF
-			done
-		}
-		device=br-$1
-		type=
-		macaddr=""
-	}
-
-	[ -n "$bridge" ] && {
-		[ -z "$ports" ] && ports="$device"
-		if [ -z "$vlan" ]; then
-			bridge_vlan_id=$((bridge_vlan_id + 1))
-			vlan=$bridge_vlan_id
-		fi
-		generate_bridge_vlan $1 $bridge "$ports" $vlan
-		device=$bridge.$vlan
-		type=""
-	}
+	case "$1" in
+		# hack (see /etc/board.d/02_network)
+		none) return ;;
+		lan*) proto=${proto:-static} ;;
+		wan*) proto=${proto:-dhcp} ;;
+	esac
 
 	if [ -n "$macaddr" ]; then
+		type=macvlan # useless, only for legacy
 		uci -q batch <<-EOF
-			add network device
-			set network.@device[-1].name='$device'
-			set network.@device[-1].macaddr='$macaddr'
+			delete network.${1}_dev
+			set network.${1}_dev='device'
+			set network.${1}_dev.name='$1'
+			set network.${1}_dev.type='$type'
+			set network.${1}_dev.ifname='$ifname'
+			set network.${1}_dev.macaddr='$macaddr'
 		EOF
+		ifname=$1
 	fi
 
 	uci -q batch <<-EOF
 		delete network.$1
 		set network.$1='interface'
 		set network.$1.type='$type'
-		set network.$1.device='$device'
+		set network.$1.ifname='$ifname'
 		set network.$1.proto='none'
 	EOF
 
@@ -171,23 +109,17 @@ generate_network() {
 				set network.$1.proto='static'
 				set network.$1.ipaddr='$ipad'
 				set network.$1.netmask='$netm'
+				set network.$1.ip6assign='60'
 			EOF
-			[ -e /proc/sys/net/ipv6 ] && uci set network.$1.ip6assign='60'
 		;;
 
 		dhcp)
 			# fixup IPv6 slave interface if parent is a bridge
-			[ "$type" = "bridge" ] && device="br-$1"
+			[ "$type" = "bridge" ] && ifname="br-$1"
 
-			uci set network.$1.proto='dhcp'
-			[ -e /proc/sys/net/ipv6 ] && {
-				uci -q batch <<-EOF
-					delete network.${1}6
-					set network.${1}6='interface'
-					set network.${1}6.device='$device'
-					set network.${1}6.proto='dhcpv6'
-				EOF
-			}
+			uci -q batch <<-EOF
+				set network.$1.proto='dhcp'
+			EOF
 		;;
 
 		pppoe)
@@ -195,16 +127,12 @@ generate_network() {
 				set network.$1.proto='pppoe'
 				set network.$1.username='username'
 				set network.$1.password='password'
+				set network.$1.ipv6='1'
+				delete network.${1}6
+				set network.${1}6='interface'
+				set network.${1}6.ifname='@${1}'
+				set network.${1}6.proto='dhcpv6'
 			EOF
-			[ -e /proc/sys/net/ipv6 ] && {
-				uci -q batch <<-EOF
-					set network.$1.ipv6='1'
-					delete network.${1}6
-					set network.${1}6='interface'
-					set network.${1}6.device='@${1}'
-					set network.${1}6.proto='dhcpv6'
-				EOF
-			}
 		;;
 	esac
 }
@@ -278,8 +206,7 @@ generate_switch() {
 
 	json_select switch
 	json_select "$key"
-	json_get_vars enable reset blinkrate cpu_port \
-		ar8xxx_mib_type ar8xxx_mib_poll_interval
+	json_get_vars enable reset blinkrate cpu_port
 
 	uci -q batch <<-EOF
 		add network switch
@@ -287,8 +214,6 @@ generate_switch() {
 		set network.@switch[-1].reset='$reset'
 		set network.@switch[-1].enable_vlan='$enable'
 		set network.@switch[-1].blinkrate='$blinkrate'
-		set network.@switch[-1].ar8xxx_mib_type='$ar8xxx_mib_type'
-		set network.@switch[-1].ar8xxx_mib_poll_interval='$ar8xxx_mib_poll_interval'
 	EOF
 
 	generate_switch_vlans_ports "$1"
@@ -297,11 +222,12 @@ generate_switch() {
 	json_select ..
 }
 
+
 generate_static_system() {
 	uci -q batch <<-EOF
 		delete system.@system[0]
 		add system system
-		set system.@system[-1].hostname='antrouter'
+		set system.@system[-1].hostname='OpenMPTCProuter'
 		set system.@system[-1].timezone='UTC'
 		set system.@system[-1].ttylogin='0'
 		set system.@system[-1].log_size='64'
@@ -311,10 +237,10 @@ generate_static_system() {
 		set system.ntp='timeserver'
 		set system.ntp.enabled='1'
 		set system.ntp.enable_server='0'
-		add_list system.ntp.server='ntp.aliyun.com'
-		add_list system.ntp.server='time1.cloud.tencent.com'
-		add_list system.ntp.server='time.ustc.edu.cn'
-		add_list system.ntp.server='cn.pool.ntp.org'
+		add_list system.ntp.server='0.openwrt.pool.ntp.org'
+		add_list system.ntp.server='1.openwrt.pool.ntp.org'
+		add_list system.ntp.server='2.openwrt.pool.ntp.org'
+		add_list system.ntp.server='3.openwrt.pool.ntp.org'
 	EOF
 
 	if json_is_a system object; then
@@ -324,13 +250,6 @@ generate_static_system() {
 				uci -q set "system.@system[-1].hostname=$hostname"
 			fi
 
-			local compat_version
-			if json_get_var compat_version compat_version; then
-				uci -q set "system.@system[-1].compat_version=$compat_version"
-			else
-				uci -q set "system.@system[-1].compat_version=1.0"
-			fi
-
 			if json_is_a ntpserver array; then
 				local keys key
 				json_get_keys keys ntpserver
@@ -440,12 +359,11 @@ generate_led() {
 		;;
 
 		switch)
-			local port_mask speed_mask mode
-			json_get_vars port_mask speed_mask mode
+			local port_mask speed_mask
+			json_get_vars port_mask speed_mask
 			uci -q batch <<-EOF
 				set system.$cfg.port_mask='$port_mask'
 				set system.$cfg.speed_mask='$speed_mask'
-				set system.$cfg.mode='$mode'
 			EOF
 		;;
 
@@ -493,24 +411,12 @@ generate_gpioswitch() {
 json_init
 json_load "$(cat ${CFG})"
 
-umask 077
-
 if [ ! -s /etc/config/network ]; then
-	bridge_name=""
 	touch /etc/config/network
 	generate_static_network
 
-	json_get_vars bridge
-	[ -n "$bridge" ] && {
-		json_select bridge
-		json_get_vars name macaddr
-		generate_bridge "$name" "$macaddr"
-		json_select ..
-		bridge_name=$name
-	}
-
 	json_get_keys keys network
-	for key in $keys; do generate_network $key $bridge_name; done
+	for key in $keys; do generate_network $key; done
 
 	json_get_keys keys switch
 	for key in $keys; do generate_switch $key; done

root/package/base-files/files/etc/board.d/99-default_network

@@ -0,0 +1,16 @@
+#!/bin/sh
+#
+# Copyright (C) 2013-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+json_is_a network object && exit 0
+
+ucidef_set_interface_lan 'eth0'
+
+board_config_flush
+
+exit 0

root/package/base-files/files/sbin/sysupgrade

@@ -0,0 +1,397 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+. /usr/share/libubox/jshn.sh
+
+# initialize defaults
+export MTD_ARGS=""
+export MTD_CONFIG_ARGS=""
+export INTERACTIVE=0
+export VERBOSE=1
+export SAVE_CONFIG=1
+export SAVE_OVERLAY=0
+export SAVE_OVERLAY_PATH=
+export SAVE_PARTITIONS=1
+export SAVE_INSTALLED_PKGS=1
+export SKIP_UNCHANGED=0
+export CONF_IMAGE=
+export CONF_BACKUP_LIST=0
+export CONF_BACKUP=
+export CONF_RESTORE=
+export NEED_IMAGE=
+export HELP=0
+export FORCE=0
+export TEST=0
+export UMOUNT_ETCBACKUP_DIR=0
+
+# parse options
+while [ -n "$1" ]; do
+	case "$1" in
+		-i) export INTERACTIVE=1;;
+		-v) export VERBOSE="$(($VERBOSE + 1))";;
+		-q) export VERBOSE="$(($VERBOSE - 1))";;
+		-n) export SAVE_CONFIG=0;;
+		-c) export SAVE_OVERLAY=1 SAVE_OVERLAY_PATH=/etc;;
+		-o) export SAVE_OVERLAY=1 SAVE_OVERLAY_PATH=/;;
+		-p) export SAVE_PARTITIONS=0;;
+		-k) export SAVE_INSTALLED_PKGS=1;;
+		-u) export SKIP_UNCHANGED=1;;
+		-b|--create-backup) export CONF_BACKUP="$2" NEED_IMAGE=1; shift;;
+		-r|--restore-backup) export CONF_RESTORE="$2" NEED_IMAGE=1; shift;;
+		-l|--list-backup) export CONF_BACKUP_LIST=1;;
+		-f) export CONF_IMAGE="$2"; shift;;
+		-F|--force) export FORCE=1;;
+		-T|--test) export TEST=1;;
+		-h|--help) export HELP=1; break;;
+		-*)
+			echo "Invalid option: $1" >&2
+			exit 1
+		;;
+		*) break;;
+	esac
+	shift;
+done
+
+export CONFFILES=/tmp/sysupgrade.conffiles
+export CONF_TAR=/tmp/sysupgrade.tgz
+export ETCBACKUP_DIR=/etc/backup
+export INSTALLED_PACKAGES=${ETCBACKUP_DIR}/installed_packages.txt
+
+IMAGE="$1"
+
+[ -z "$IMAGE" -a -z "$NEED_IMAGE" -a $CONF_BACKUP_LIST -eq 0 -o $HELP -gt 0 ] && {
+	cat <<EOF
+Usage: $0 [<upgrade-option>...] <image file or URL>
+       $0 [-q] [-i] [-c] [-u] [-o] [-k] <backup-command> <file>
+
+upgrade-option:
+	-f <config>  restore configuration from .tar.gz (file or url)
+	-i           interactive mode
+	-c           attempt to preserve all changed files in /etc/
+	-o           attempt to preserve all changed files in /, except those
+	             from packages but including changed confs.
+	-u           skip from backup files that are equal to those in /rom
+	-n           do not save configuration over reflash
+	-p           do not attempt to restore the partition table after flash.
+	-k           include in backup a list of current installed packages at
+	             $INSTALLED_PACKAGES
+	-T | --test
+	             Verify image and config .tar.gz but do not actually flash.
+	-F | --force
+	             Flash image even if image checks fail, this is dangerous!
+	-q           less verbose
+	-v           more verbose
+	-h | --help  display this help
+
+backup-command:
+	-b | --create-backup <file>
+	             create .tar.gz of files specified in sysupgrade.conf
+	             then exit. Does not flash an image. If file is '-',
+	             i.e. stdout, verbosity is set to 0 (i.e. quiet).
+	-r | --restore-backup <file>
+	             restore a .tar.gz created with sysupgrade -b
+	             then exit. Does not flash an image. If file is '-',
+	             the archive is read from stdin.
+	-l | --list-backup
+	             list the files that would be backed up when calling
+	             sysupgrade -b. Does not create a backup file.
+
+EOF
+	exit 1
+}
+
+[ -n "$IMAGE" -a -n "$NEED_IMAGE" ] && {
+	cat <<-EOF
+		-b|--create-backup and -r|--restore-backup do not perform a firmware upgrade.
+		Do not specify both -b|-r and a firmware image.
+	EOF
+	exit 1
+}
+
+# prevent messages from clobbering the tarball when using stdout
+[ "$CONF_BACKUP" = "-" ] && export VERBOSE=0
+
+missing_lines() {
+	local file1 file2 line
+	file1="$1"
+	file2="$2"
+	oIFS="$IFS"
+	IFS=":"
+	while read line; do
+		set -- $line
+		grep -q "^$1:" "$file2" || echo "$*"
+	done < "$file1"
+	IFS="$oIFS"
+}
+
+list_conffiles() {
+	awk '
+		BEGIN { conffiles = 0 }
+		/^Conffiles:/ { conffiles = 1; next }
+		!/^ / { conffiles = 0; next }
+		conffiles == 1 { print }
+	' /usr/lib/opkg/status
+}
+
+list_changed_conffiles() {
+	# Cannot handle spaces in filenames - but opkg cannot either...
+	list_conffiles | while read file csum; do
+		[ -r "$file" ] || continue
+
+		echo "${csum}  ${file}" | busybox sha256sum -sc - || echo "$file"
+	done
+}
+
+list_static_conffiles() {
+	local filter=$1
+
+	find $(sed -ne '/^[[:space:]]*$/d; /^#/d; p' \
+		/etc/sysupgrade.conf /lib/upgrade/keep.d/* 2>/dev/null) \
+		\( -type f -o -type l \) $filter 2>/dev/null
+}
+
+add_conffiles() {
+	local file="$1"
+
+	( list_static_conffiles "$find_filter"; list_changed_conffiles ) |
+		sort -u > "$file"
+	return 0
+}
+
+add_overlayfiles() {
+	local file="$1"
+
+	local packagesfiles=$1.packagesfiles
+	touch "$packagesfiles"
+
+	if [ "$SAVE_OVERLAY_PATH" = / ]; then
+		local conffiles=$1.conffiles
+		local keepfiles=$1.keepfiles
+
+		list_conffiles | cut -f2 -d ' ' | sort -u > "$conffiles"
+
+		# backup files from /etc/sysupgrade.conf and /lib/upgrade/keep.d, but
+		# ignore those aready controlled by opkg conffiles
+		list_static_conffiles | sort -u |
+			grep -h -v -x -F -f $conffiles > "$keepfiles"
+
+		# backup conffiles, but only those changed if '-u'
+		[ $SKIP_UNCHANGED = 1 ] &&
+			list_changed_conffiles | sort -u > "$conffiles"
+
+		# do not backup files from packages, except those listed
+		# in conffiles and keep.d
+		{
+			find /usr/lib/opkg/info -type f -name "*.list" -exec cat {} \;
+			find /usr/lib/opkg/info -type f -name "*.control" -exec sed \
+				-ne '/^Alternatives/{s/^Alternatives: //;s/, /\n/g;p}' {} \; |
+				cut -f2 -d:
+		} |  grep -v -x -F -f $conffiles |
+		     grep -v -x -F -f $keepfiles | sort -u > "$packagesfiles"
+		rm -f "$keepfiles" "$conffiles"
+	fi
+
+	# busybox grep bug when file is empty
+	[ -s "$packagesfiles" ] || echo > $packagesfiles
+
+	( cd /overlay/upper/; find .$SAVE_OVERLAY_PATH \( -type f -o -type l \) $find_filter | sed \
+		-e 's,^\.,,' \
+		-e '\,^/etc/board.json$,d' \
+		-e '\,/[^/]*-opkg$,d' \
+		-e '\,^/etc/urandom.seed$,d' \
+		-e "\,^$INSTALLED_PACKAGES$,d" \
+		-e '\,^/usr/lib/opkg/.*,d' \
+	) | grep -v -x -F -f $packagesfiles > "$file"
+
+	rm -f "$packagesfiles"
+
+	return 0
+}
+
+if [ $SAVE_OVERLAY = 1 ]; then
+	[ ! -d /overlay/upper/etc ] && {
+		echo "Cannot find '/overlay/upper/etc', required for '-c'" >&2
+		exit 1
+	}
+	sysupgrade_init_conffiles="add_overlayfiles"
+else
+	sysupgrade_init_conffiles="add_conffiles"
+fi
+
+find_filter=""
+if [ $SKIP_UNCHANGED = 1 ]; then
+	[ ! -d /rom/ ] && {
+		echo "'/rom/' is required by '-u'"
+		exit 1
+	}
+	find_filter='( ( -exec test -e /rom/{} ; -exec cmp -s /{} /rom/{} ; ) -o -print )'
+fi
+
+include /lib/upgrade
+
+do_save_conffiles() {
+	local conf_tar="$1"
+
+	[ "$(rootfs_type)" = "tmpfs" ] && {
+		echo "Cannot save config while running from ramdisk." >&2
+		ask_bool 0 "Abort" && exit
+		rm -f "$conf_tar"
+		return 0
+	}
+	run_hooks "$CONFFILES" $sysupgrade_init_conffiles
+	ask_bool 0 "Edit config file list" && vi "$CONFFILES"
+
+	if [ "$SAVE_INSTALLED_PKGS" -eq 1 ]; then
+		echo "${INSTALLED_PACKAGES}" >> "$CONFFILES"
+		mkdir -p "$ETCBACKUP_DIR"
+		# Avoid touching filesystem on each backup
+		RAMFS="$(mktemp -d -t sysupgrade.XXXXXX)"
+		mkdir -p "$RAMFS/upper" "$RAMFS/work"
+		mount -t overlay overlay -o lowerdir=$ETCBACKUP_DIR,upperdir=$RAMFS/upper,workdir=$RAMFS/work $ETCBACKUP_DIR &&
+			UMOUNT_ETCBACKUP_DIR=1 || {
+				echo "Cannot mount '$ETCBACKUP_DIR' as tmpfs to avoid touching disk while saving the list of installed packages." >&2
+				ask_bool 0 "Abort" && exit
+			}
+
+		# Format: pkg-name<TAB>{rom,overlay,unkown}
+		# rom is used for pkgs in /rom, even if updated later
+		find /usr/lib/opkg/info -name "*.control" \( \
+			\( -exec test -f /rom/{} \; -exec echo {} rom \; \) -o \
+			\( -exec test -f /overlay/upper/{} \; -exec echo {} overlay \; \) -o \
+			\( -exec echo {} unknown \; \) \
+			\) | sed -e 's,.*/,,;s/\.control /\t/' > ${INSTALLED_PACKAGES}
+	fi
+
+	v "Saving config files..."
+	[ "$VERBOSE" -gt 1 ] && TAR_V="v" || TAR_V=""
+	tar c${TAR_V}zf "$conf_tar" -T "$CONFFILES" 2>/dev/null
+	if [ "$?" -ne 0 ]; then
+		echo "Failed to create the configuration backup."
+		rm -f "$conf_tar"
+		exit 1
+	fi
+
+	[ "$UMOUNT_ETCBACKUP_DIR" -eq 1 ] && {
+		umount "$ETCBACKUP_DIR"
+		rm -rf "$RAMFS"
+	}
+	rm -f "$CONFFILES"
+}
+
+if [ $CONF_BACKUP_LIST -eq 1 ]; then
+	run_hooks "$CONFFILES" $sysupgrade_init_conffiles
+	[ "$SAVE_INSTALLED_PKGS" -eq 1 ] && echo ${INSTALLED_PACKAGES} >> "$CONFFILES"
+	cat "$CONFFILES"
+	rm -f "$CONFFILES"
+	exit 0
+fi
+
+if [ -n "$CONF_BACKUP" ]; then
+	do_save_conffiles "$CONF_BACKUP"
+	exit $?
+fi
+
+if [ -n "$CONF_RESTORE" ]; then
+	if [ "$CONF_RESTORE" != "-" ] && [ ! -f "$CONF_RESTORE" ]; then
+		echo "Backup archive '$CONF_RESTORE' not found." >&2
+		exit 1
+	fi
+
+	[ "$VERBOSE" -gt 1 ] && TAR_V="v" || TAR_V=""
+	cp /etc/passwd /etc/group /etc/shadow /tmp
+	tar -C / -x${TAR_V}zf "$CONF_RESTORE"
+	missing_lines /tmp/passwd /etc/passwd >> /etc/passwd
+	missing_lines /tmp/group /etc/group >> /etc/group
+	missing_lines /tmp/shadow /etc/shadow >> /etc/shadow
+	rm /tmp/passwd /tmp/group /tmp/shadow
+
+	exit $?
+fi
+
+type platform_check_image >/dev/null 2>/dev/null || {
+	echo "Firmware upgrade is not implemented for this platform." >&2
+	exit 1
+}
+
+case "$IMAGE" in
+	http://*|\
+	https://*)
+		wget -O/tmp/sysupgrade.img "$IMAGE" || exit 1
+		IMAGE=/tmp/sysupgrade.img
+		;;
+esac
+
+IMAGE="$(readlink -f "$IMAGE")"
+
+case "$IMAGE" in
+	'')
+		echo "Image file not found." >&2
+		exit 1
+		;;
+	/tmp/*)	;;
+	*)
+		v "Image not in /tmp, copying..."
+		cp -f "$IMAGE" /tmp/sysupgrade.img
+		IMAGE=/tmp/sysupgrade.img
+		;;
+esac
+
+json_load "$(/usr/libexec/validate_firmware_image "$IMAGE")" || {
+	echo "Failed to check image"
+	exit 1
+}
+json_get_var valid "valid"
+[ "$valid" -eq 0 ] && {
+	if [ $FORCE -eq 1 ]; then
+		echo "Image check failed but --force given - will update anyway!" >&2
+	else
+		echo "Image check failed." >&2
+		exit 1
+	fi
+}
+
+if [ -n "$CONF_IMAGE" ]; then
+	case "$(get_magic_word $CONF_IMAGE cat)" in
+		# .gz files
+		1f8b) ;;
+		*)
+			echo "Invalid config file. Please use only .tar.gz files" >&2
+			exit 1
+		;;
+	esac
+	get_image "$CONF_IMAGE" "cat" > "$CONF_TAR"
+	export SAVE_CONFIG=1
+elif ask_bool $SAVE_CONFIG "Keep config files over reflash"; then
+	[ $TEST -eq 1 ] || do_save_conffiles "$CONF_TAR"
+	export SAVE_CONFIG=1
+else
+	[ $TEST -eq 1 ] || rm -f "$CONF_TAR"
+	export SAVE_CONFIG=0
+fi
+
+if [ $TEST -eq 1 ]; then
+	exit 0
+fi
+
+install_bin /sbin/upgraded
+v "Commencing upgrade. Closing all shell sessions."
+
+COMMAND='/lib/upgrade/do_stage2'
+
+if [ -n "$FAILSAFE" ]; then
+	printf '%s\x00%s\x00%s' "$RAM_ROOT" "$IMAGE" "$COMMAND" >/tmp/sysupgrade
+	lock -u /tmp/.failsafe
+else
+	json_init
+	json_add_string prefix "$RAM_ROOT"
+	json_add_string path "$IMAGE"
+	[ $FORCE -eq 1 ] && json_add_boolean force 1
+	[ $SAVE_CONFIG -eq 1 ] && json_add_string backup "$CONF_TAR"
+	json_add_string command "$COMMAND"
+	json_add_object options
+	json_add_int save_partitions "$SAVE_PARTITIONS"
+	json_close_object
+
+	ubus call system sysupgrade "$(json_dump)"
+fi

root/package/network/ipv6/6in4/Makefile

@@ -0,0 +1,45 @@
+#
+# Copyright (C) 2010-2015 OpenWrt.org
+# Copyright (C) 2018-2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
+# - Added gateway setting
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=6in4
+PKG_VERSION:=270
+PKG_RELEASE:=2
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define Package/6in4
+  SECTION:=net
+  CATEGORY:=Network
+  DEPENDS:=@IPV6 +kmod-sit +uclient-fetch
+  TITLE:=IPv6-in-IPv4 configuration support
+  MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
+  PKGARCH:=all
+endef
+
+define Package/6in4/description
+Provides support for 6in4 tunnels in /etc/config/network.
+Refer to http://wiki.openwrt.org/doc/uci/network for
+configuration details.
+endef
+
+define Build/Compile
+endef
+
+define Build/Configure
+endef
+
+define Package/6in4/install
+	$(INSTALL_DIR) $(1)/lib/netifd/proto
+	$(INSTALL_BIN) ./files/6in4.sh $(1)/lib/netifd/proto/6in4.sh
+endef
+
+$(eval $(call BuildPackage,6in4))

root/package/network/ipv6/6in4/files/6in4.sh

@@ -0,0 +1,149 @@
+#!/bin/sh
+# 6in4.sh - IPv6-in-IPv4 tunnel backend
+# Copyright (c) 2010-2015 OpenWrt.org
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. /lib/functions/network.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+proto_6in4_update() {
+	sh -c '
+		timeout=5
+
+		(while [ $((timeout--)) -gt 0 ]; do
+			sleep 1
+			kill -0 $$ || exit 0
+		done; kill -9 $$) 2>/dev/null &
+
+		exec "$@"
+	' "$1" "$@"
+}
+
+proto_6in4_add_prefix() {
+	append "$3" "$1"
+}
+
+proto_6in4_setup() {
+	local cfg="$1"
+	local iface="$2"
+	local link="6in4-$cfg"
+
+	local mtu ttl tos ipaddr peeraddr ip6addr ip6prefix ip6prefixes tunlink tunnelid username password updatekey gateway
+	json_get_vars mtu ttl tos ipaddr peeraddr ip6addr tunlink tunnelid username password updatekey gateway
+	json_for_each_item proto_6in4_add_prefix ip6prefix ip6prefixes
+
+	[ -z "$peeraddr" ] && {
+		proto_notify_error "$cfg" "MISSING_ADDRESS"
+		proto_block_restart "$cfg"
+		return
+	}
+
+	[ -n "$tunlink" ] && ( proto_add_host_dependency "$cfg" "$peeraddr" "$tunlink" )
+
+	[ -z "$ipaddr" ] && {
+		local wanif="$tunlink"
+		if [ -z "$wanif" ] && ! network_find_wan wanif; then
+			proto_notify_error "$cfg" "NO_WAN_LINK"
+			return
+		fi
+
+		if ! network_get_ipaddr ipaddr "$wanif"; then
+			proto_notify_error "$cfg" "NO_WAN_LINK"
+			return
+		fi
+	}
+
+	proto_init_update "$link" 1
+
+	[ -n "$ip6addr" ] && {
+		local local6="${ip6addr%%/*}"
+		local mask6="${ip6addr##*/}"
+		[[ "$local6" = "$mask6" ]] && mask6=
+		proto_add_ipv6_address "$local6" "$mask6"
+		proto_add_ipv6_route "::" 0 "" "" "" "$local6/$mask6"
+	}
+
+	[ -n "$gateway" ] && {
+		proto_add_ipv6_route "::" 0 "$gateway"
+	}
+
+	for ip6prefix in $ip6prefixes; do
+		proto_add_ipv6_prefix "$ip6prefix"
+		proto_add_ipv6_route "::" 0 "" "" "" "$ip6prefix"
+	done
+
+	proto_add_tunnel
+	json_add_string mode sit
+	json_add_int mtu "${mtu:-1280}"
+	json_add_int ttl "${ttl:-64}"
+	[ -n "$tos" ] && json_add_string tos "$tos"
+	json_add_string local "$ipaddr"
+	json_add_string remote "$peeraddr"
+	[ -n "$tunlink" ] && json_add_string link "$tunlink"
+	proto_close_tunnel
+
+	proto_send_update "$cfg"
+
+	[ -n "$tunnelid" -a -n "$username" -a \( -n "$password" -o -n "$updatekey" \) ] && {
+		[ -n "$updatekey" ] && password="$updatekey"
+
+		local http="http"
+		local urlget="uclient-fetch"
+		local urlget_opts="-qO-"
+		local ca_path="${SSL_CERT_DIR:-/etc/ssl/certs}"
+
+		[ -f /lib/libustream-ssl.so ] && http=https
+		[ "$http" = "https" -a -z "$(find $ca_path -name "*.0" 2>/dev/null)" ] && {
+			urlget_opts="$urlget_opts --no-check-certificate"
+		}
+
+		local url="$http://ipv4.tunnelbroker.net/nic/update?hostname=$tunnelid"
+		local try=0
+		local max=3
+
+		(
+			set -o pipefail
+			while [ $((++try)) -le $max ]; do
+				if proto_6in4_update $urlget $urlget_opts --user="$username" --password="$password" "$url" 2>&1 | \
+					sed -e 's,^Killed$,timeout,' -e "s,^,update $try/$max: ," | \
+					logger -t "$link";
+				then
+					logger -t "$link" "updated"
+					return 0
+				fi
+				sleep 5
+			done
+			logger -t "$link" "update failed"
+		)
+	}
+}
+
+proto_6in4_teardown() {
+	local cfg="$1"
+}
+
+proto_6in4_init_config() {
+	no_device=1
+	available=1
+
+	proto_config_add_string "ipaddr"
+	proto_config_add_string "ip6addr"
+	proto_config_add_array "ip6prefix"
+	proto_config_add_string "peeraddr"
+	proto_config_add_string "tunlink"
+	proto_config_add_string "tunnelid"
+	proto_config_add_string "username"
+	proto_config_add_string "password"
+	proto_config_add_string "updatekey"
+	proto_config_add_string "gateway"
+	proto_config_add_int "mtu"
+	proto_config_add_int "ttl"
+	proto_config_add_string "tos"
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol 6in4
+}

root/target/linux/bcm27xx/bcm2711/config-5.15

@@ -445,6 +445,7 @@ CONFIG_USB_COMMON=y
 CONFIG_USB_DWCOTG=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_LAN78XX=y
+CONFIG_USB_NET_DRIVERS=y
 CONFIG_USB_PCI=y
 CONFIG_USB_PHY=y
 CONFIG_USB_STORAGE=y

root/target/linux/bcm27xx/bcm2711/config-5.4

@@ -1,467 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_AIO is not set
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM64=y
-CONFIG_ARM64_4K_PAGES=y
-CONFIG_ARM64_CNP=y
-CONFIG_ARM64_CONT_SHIFT=4
-CONFIG_ARM64_ERRATUM_1165522=y
-CONFIG_ARM64_ERRATUM_1286807=y
-CONFIG_ARM64_ERRATUM_819472=y
-CONFIG_ARM64_ERRATUM_824069=y
-CONFIG_ARM64_ERRATUM_826319=y
-CONFIG_ARM64_ERRATUM_827319=y
-CONFIG_ARM64_ERRATUM_832075=y
-CONFIG_ARM64_ERRATUM_843419=y
-CONFIG_ARM64_HW_AFDBM=y
-CONFIG_ARM64_MODULE_PLTS=y
-CONFIG_ARM64_PAGE_SHIFT=12
-CONFIG_ARM64_PAN=y
-CONFIG_ARM64_PA_BITS=48
-CONFIG_ARM64_PA_BITS_48=y
-CONFIG_ARM64_PTR_AUTH=y
-CONFIG_ARM64_SSBD=y
-CONFIG_ARM64_SVE=y
-CONFIG_ARM64_TAGGED_ADDR_ABI=y
-CONFIG_ARM64_UAO=y
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-CONFIG_ARM64_VHE=y
-CONFIG_ARM64_WORKAROUND_CLEAN_CACHE=y
-CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
-# CONFIG_ARM_BCM2835_CPUFREQ is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-CONFIG_ARM_GIC_V3_ITS_PCI=y
-CONFIG_ARM_PSCI_FW=y
-CONFIG_ARM_RASPBERRYPI_CPUFREQ=y
-# CONFIG_ARM_SCMI_PROTOCOL is not set
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-CONFIG_BCM2708_VCMEM=y
-CONFIG_BCM2711_THERMAL=y
-CONFIG_BCM2835_DEVGPIOMEM=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_BCM2835_POWER=y
-# CONFIG_BCM2835_SMI is not set
-# CONFIG_BCM2835_THERMAL is not set
-CONFIG_BCM2835_VCHIQ=y
-# CONFIG_BCM2835_VCHIQ_MMAL is not set
-CONFIG_BCM2835_WDT=y
-CONFIG_BCM7XXX_PHY=y
-CONFIG_BCMGENET=y
-CONFIG_BCM_NET_PHYLIB=y
-CONFIG_BCM_VCIO=y
-# CONFIG_BCM_VC_SM is not set
-# CONFIG_BCM_VC_SM_CMA is not set
-CONFIG_BCM_VIDEOCORE=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=16
-CONFIG_BLK_DEV_RAM_SIZE=4096
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-CONFIG_BRCM_CHAR_DRIVERS=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_CAVIUM_ERRATUM_22375=y
-CONFIG_CAVIUM_ERRATUM_23154=y
-CONFIG_CAVIUM_ERRATUM_27456=y
-CONFIG_CAVIUM_TX2_ERRATUM_219=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLK_BCM2835=y
-CONFIG_CLK_RASPBERRYPI=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMA=y
-CONFIG_CMA_ALIGNMENT=8
-CONFIG_CMA_AREAS=7
-# CONFIG_CMA_DEBUG is not set
-# CONFIG_CMA_DEBUGFS is not set
-CONFIG_CMA_SIZE_MBYTES=5
-# CONFIG_CMA_SIZE_SEL_MAX is not set
-CONFIG_CMA_SIZE_SEL_MBYTES=y
-# CONFIG_CMA_SIZE_SEL_MIN is not set
-# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_XGENE=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CONSOLE_TRANSLATIONS=y
-CONFIG_CONTIG_ALLOC=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CRC16=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DIMLIB=y
-CONFIG_DMABUF_HEAPS=y
-CONFIG_DMABUF_HEAPS_CMA=y
-CONFIG_DMABUF_HEAPS_SYSTEM=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2708=y
-CONFIG_DMA_BCM2835=y
-CONFIG_DMA_CMA=y
-CONFIG_DMA_DIRECT_REMAP=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_SHARED_BUFFER=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DNOTIFY=y
-CONFIG_DRM_RCAR_WRITEBACK=y
-CONFIG_DTC=y
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENABLE_MUST_CHECK=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_F2FS_FS=y
-CONFIG_FB=y
-CONFIG_FB_BCM2708=y
-CONFIG_FB_CFB_COPYAREA=y
-CONFIG_FB_CFB_FILLRECT=y
-CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_CMDLINE=y
-# CONFIG_FB_RPISENSE is not set
-CONFIG_FB_SIMPLE=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-# CONFIG_FLATMEM_MANUAL is not set
-CONFIG_FONT_8x16=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_FRAME_POINTER=y
-CONFIG_FREEZER=y
-CONFIG_FSL_ERRATUM_A008585=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FUJITSU_ERRATUM_010001=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_CPU_VULNERABILITIES=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_GETTIMEOFDAY=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_BCM_VIRT=y
-# CONFIG_GPIO_FSM is not set
-CONFIG_GPIO_RASPBERRYPI_EXP=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HOLES_IN_ZONE=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HW_CONSOLE=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_BCM2835 is not set
-CONFIG_HW_RANDOM_IPROC_RNG200=y
-CONFIG_I2C=y
-# CONFIG_I2C_BCM2708 is not set
-CONFIG_I2C_BOARDINFO=y
-# CONFIG_I2C_BRCMSTB is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_INPUT=y
-CONFIG_INPUT_MOUSEDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KEYS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_ACTPWR=y
-CONFIG_LEDS_TRIGGER_INPUT=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LOGO=y
-CONFIG_LOGO_LINUX_CLUT224=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_MAC_PARTITION=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MAX_RAW_DEVS=256
-CONFIG_MDIO_BCM_UNIMAC=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MEMORY_ISOLATION=y
-CONFIG_MFD_CORE=y
-# CONFIG_MFD_RPISENSE_CORE is not set
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_BCM2835_DMA=y
-CONFIG_MMC_BCM2835_MMC=y
-CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
-CONFIG_MMC_BCM2835_SDHOST=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_IO_ACCESSORS=y
-CONFIG_MMC_SDHCI_IPROC=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_RELA=y
-# CONFIG_MTD is not set
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NLS=y
-CONFIG_NLS_ASCII=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_CONFIGFS=y
-CONFIG_OF_DYNAMIC=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_OVERLAY=y
-CONFIG_OF_RESOLVE=y
-CONFIG_PADATA=y
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_BRCMSTB=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYLIB=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_BCM2835=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PRINTK_TIME=y
-CONFIG_QUEUED_RWLOCKS=y
-CONFIG_QUEUED_SPINLOCKS=y
-CONFIG_RAS=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_RATIONAL=y
-# CONFIG_RAVE_SP_CORE is not set
-CONFIG_RAW_DRIVER=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_SIMPLE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
-# CONFIG_RPIVID_MEM is not set
-CONFIG_RPS=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-# CONFIG_SCSI_LOWLEVEL is not set
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_SERIAL_8250_BCM2835AUX=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=0
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_DEV_BUS=y
-# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SRCU=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-# CONFIG_TEXTSEARCH is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_THERMAL_WRITABLE_TRIPS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_DWCOTG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_LAN78XX=y
-CONFIG_USB_NET_DRIVERS=y
-CONFIG_USB_PCI=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_UAS=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_VMAP_STACK=y
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_VT_CONSOLE_SLEEP=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZONE_DMA32=y