synca

build.sh

@@ -42,7 +42,7 @@ OMR_KERNEL=${OMR_KERNEL:-5.4}
 OMR_RELEASE=${OMR_RELEASE:-$(git describe --tags `git rev-list --tags --max-count=1` | tail -1 | cut -d '-' -f1)}
 OMR_REPO=${OMR_REPO:-http://$OMR_HOST:$OMR_PORT/release/$OMR_RELEASE/$OMR_TARGET}
 
-OMR_FEED_URL="${OMR_FEED_URL:-https://github.com/ysurac/openmptcprouter-feeds}"
+OMR_FEED_URL="${OMR_FEED_URL:-https://github.com/suyuan168/openmptcprouter-feeds}"
 OMR_FEED_SRC="${OMR_FEED_SRC:-develop}"
 
 CUSTOM_FEED_URL="${CUSTOM_FEED_URL}"
@@ -62,10 +62,14 @@ elif [ "$OMR_TARGET" = "rpi4" ]; then
 	OMR_REAL_TARGET="aarch64_cortex-a72"
 elif [ "$OMR_TARGET" = "rpi2" ]; then
 	OMR_REAL_TARGET="arm_cortex-a7_neon-vfpv4"
+elif [ "$OMR_TARGET" = "4018" ]; then
+	OMR_REAL_TARGET="arm_cortex-a7_neon-vfpv4"
+elif [ "$OMR_TARGET" = "4019" ]; then
+	OMR_REAL_TARGET="arm_cortex-a7_neon-vfpv4"
 elif [ "$OMR_TARGET" = "wrt3200acm" ]; then
-	OMR_REAL_TARGET="arm_cortex-a9_vfpv3"
+	OMR_REAL_TARGET="arm_cortex-a9_vfpv3-d16"
 elif [ "$OMR_TARGET" = "wrt32x" ]; then
-	OMR_REAL_TARGET="arm_cortex-a9_vfpv3"
+	OMR_REAL_TARGET="arm_cortex-a9_vfpv3-d16"
 elif [ "$OMR_TARGET" = "bpi-r1" ]; then
 	OMR_REAL_TARGET="arm_cortex-a7_neon-vfpv4"
 elif [ "$OMR_TARGET" = "bpi-r2" ]; then
@@ -82,9 +86,9 @@ fi
 
 #_get_repo source https://github.com/ysurac/openmptcprouter-source "master"
 if [ "$OMR_OPENWRT" = "default" ]; then
-	_get_repo "$OMR_TARGET/source" https://github.com/openwrt/openwrt "81edc842f6277bc9c12a86f295caab70ad519d27"
+	_get_repo "$OMR_TARGET/source" https://github.com/openwrt/openwrt "b36068d35d9edbd8ed6aaeed6f4c863bfe4cfbee"
-	_get_repo feeds/packages https://github.com/openwrt/packages "1677e5fcd7a701e881612729400c03084328a69f"
+	_get_repo feeds/packages https://github.com/openwrt/packages "1e3c22d81dec069893fec04784d4ce48a6b883cd"
-	_get_repo feeds/luci https://github.com/openwrt/luci "1dc16d9d3ffeee30d072c569e9a3c693d303e9fc"
+	_get_repo feeds/luci https://github.com/openwrt/luci "c615dd1387883faa76c0455c45db03438ea05e59"
 elif [ "$OMR_OPENWRT" = "master" ]; then
 	_get_repo "$OMR_TARGET/source" https://github.com/openwrt/openwrt "master"
 	_get_repo feeds/packages https://github.com/openwrt/packages "master"
@@ -203,6 +207,9 @@ fi
 if [ "$OMR_PACKAGES" = "mini" ]; then
 	echo "CONFIG_PACKAGE_${OMR_DIST}-mini=y" >> "$OMR_TARGET/source/.config"
 fi
+if [ "$OMR_PACKAGES" = "zuixiao" ]; then
+	echo "CONFIG_PACKAGE_${OMR_DIST}-zuixiao=y" >> "$OMR_TARGET/source/.config"
+fi
 
 if [ "$OMR_TARGET" = "bpi-r1" -a "$OMR_OPENWRT" = "master" ]; then
 	# We disable mc in master, because it leads to unknown compilation errors on bpi-r1 target
@@ -420,6 +427,9 @@ if [ "$OMR_KERNEL" = "5.4" ]; then
 	echo "Set to kernel 5.4 for mediatek arch (BPI-R2)"
 	find target/linux/mediatek -type f -name Makefile -exec sed -i 's%KERNEL_PATCHVER:=4.19%KERNEL_PATCHVER:=5.4%g' {} \;
 	echo "Done"
+	echo "Set to kernel 5.4 for IPQ (4019)"
+	find target/linux/ipq40xx -type f -name Makefile -exec sed -i 's%KERNEL_PATCHVER:=4.19%KERNEL_PATCHVER:=5.4%g' {} \;
+	echo "Done"
 fi
 
 #rm -rf feeds/packages/libs/libwebp
@@ -472,4 +482,4 @@ fi
 echo "Building $OMR_DIST for the target $OMR_TARGET"
 make defconfig
 make IGNORE_ERRORS=m "$@"
-echo "Done"
+echo "Done"

config

@@ -40,7 +40,7 @@ CONFIG_BUSYBOX_CONFIG_WATCH=y
 # CONFIG_GDB is not set
 CONFIG_GRUB_SERIAL=""
 CONFIG_GRUB_TIMEOUT="0"
-CONFIG_GRUB_TITLE="antrouter"
+CONFIG_GRUB_TITLE="OpenMPTCProuter"
 CONFIG_KERNEL_AIO=y
 CONFIG_KERNEL_DEBUG_GPIO=y
 # CONFIG_KERNEL_DEBUG_INFO is not set
@@ -211,9 +211,40 @@ CONFIG_KERNEL_MPTCP_REDUNDANT=y
 CONFIG_KERNEL_DEFAULT_SCHEDULER=y
 CONFIG_KERNEL_MPTCP=y
 CONFIG_KERNEL_CRYPTO_SHA256=y
+CONFIG_LUCI_LANG_hu=y
+CONFIG_LUCI_LANG_pt=y
+CONFIG_LUCI_LANG_sk=y
+CONFIG_LUCI_LANG_ro=y
 CONFIG_LUCI_LANG_en=y
+CONFIG_LUCI_LANG_pl=y
+CONFIG_LUCI_LANG_uk=y
+CONFIG_LUCI_LANG_ja=y
+CONFIG_LUCI_LANG_vi=y
+CONFIG_LUCI_LANG_de=y
+CONFIG_LUCI_LANG_no=y
+CONFIG_LUCI_LANG_ms=y
 CONFIG_LUCI_LANG_zh_Hans=y
 CONFIG_LUCI_LANG_zh_Hant=y
+CONFIG_LUCI_LANG_ko=y
+CONFIG_LUCI_LANG_he=y
+CONFIG_LUCI_LANG_zh-tw=y
+CONFIG_LUCI_LANG_tr=y
+CONFIG_LUCI_LANG_sv=y
+CONFIG_LUCI_LANG_ru=y
+CONFIG_LUCI_LANG_el=y
+CONFIG_LUCI_LANG_ca=y
+CONFIG_LUCI_LANG_es=y
+CONFIG_LUCI_LANG_pt_BR=y
+CONFIG_LUCI_LANG_cs=y
+CONFIG_LUCI_LANG_fr=y
+CONFIG_LUCI_LANG_it=y
+CONFIG_LUCI_LANG_ar=y
+CONFIG_LUCI_LANG_bg=y
+CONFIG_LUCI_LANG_bn_BD=y
+CONFIG_LUCI_LANG_fi=y
+CONFIG_LUCI_LANG_hi=y
+CONFIG_LUCI_LANG_mr=y
+CONFIG_LUCI_LANG_nb_NO=y
 CONFIG_TARGET_ROOTFS_PARTSIZE=512
 CONFIG_TARGET_KERNEL_PARTSIZE=64
 CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
@@ -222,15 +253,4 @@ CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
 # CONFIG_PACKAGE_libustream-wolfssl is not set
 CONFIG_KERNEL_DEVMEM=y
 CONFIG_KERNEL_DEVKMEM=y
-CONFIG_AUTOREMOVE=y
+CONFIG_AUTOREMOVE=y
-CONFIG_PACKAGE_luci-theme-argon=y
-CONFIG_PACKAGE_luci-theme-bootstrap=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-# CONFIG_PACKAGE_luci-theme-argon is not set
-CONFIG_PACKAGE_luci-app-status=m
-CONFIG_PACKAGE_luci-mod-status=y
-CONFIG_PACKAGE_frpc=y
-CONFIG_PACKAGE_rtty-nossl=y
-CONFIG_PACKAGE_minicom=y
-CONFIG_PACKAGE_irqbalance=y
-CONFIG_PACKAGE_mtr=y

config-bpi-r1

@@ -0,0 +1,60 @@
+CONFIG_TARGET_BOARD="sunxi"
+CONFIG_TARGET_sunxi=y
+CONFIG_TARGET_sunxi_cortexa7=y
+CONFIG_TARGET_sunxi_cortexa7_DEVICE_lamobo_lamobo-r1=y
+CONFIG_TARGET_SUBTARGET="cortexa7"
+CONFIG_TARGET_PROFILE="DEVICE_lamobo_lamobo-r1"
+CONFIG_TARGET_ROOTFS_EXT4FS=y
+CONFIG_TARGET_ROOTFS_SQUASHFS=y
+CONFIG_PACKAGE_u-boot-Lamobo_R1=y
+CONFIG_PACKAGE_uboot-envtools=y
+CONFIG_PACKAGE_attr=y
+CONFIG_PACKAGE_f2fs-tools=y
+CONFIG_PACKAGE_f2fsck=y
+CONFIG_PACKAGE_mkf2fs=y
+CONFIG_PACKAGE_rtl8188eu-firmware=y
+CONFIG_PACKAGE_ath9k-htc-firmware=y
+CONFIG_PACKAGE_mt7601u-firmware=y
+CONFIG_PACKAGE_rt2800-usb-firmware=y
+CONFIG_PACKAGE_rtl8192cu-firmware=y
+CONFIG_PACKAGE_rtl8192su-firmware=y
+CONFIG_PACKAGE_kmod-switch-bcm53xx=y
+CONFIG_PACKAGE_kmod-switch-bcm53xx-mdio=y
+CONFIG_PACKAGE_ip-bridge=y
+CONFIG_PACKAGE_swconfig=y
+CONFIG_PACKAGE_kmod-swconfig=y
+CONFIG_PACKAGE_kmod-ste10xp=y
+CONFIG_PACKAGE_kmod-can-bcm=y
+CONFIG_PACKAGE_kmod-ata-sunxi=y
+CONFIG_PACKAGE_kmod-rtl8192cu=y
+CONFIG_PACKAGE_kmod-ath9k-common=y
+CONFIG_PACKAGE_kmod-ath9k-htc=y
+CONFIG_PACKAGE_kmod-net-rtl8192su=y
+CONFIG_PACKAGE_kmod-rtl8192c-common=y
+CONFIG_PACKAGE_kmod-rtl8192cu=y
+CONFIG_PACKAGE_kmod-rtl8xxxu=y
+CONFIG_PACKAGE_kmod-sunxi-ir=y
+CONFIG_PACKAGE_kmod-sound-soc-sunxi=y
+CONFIG_PACKAGE_kmod-rtlwifi-usb=y
+CONFIG_PACKAGE_kmod-rtlwifi=y
+CONFIG_PACKAGE_kmod-scsi-core=y
+CONFIG_PACKAGE_kmod-slhc=y
+CONFIG_PACKAGE_kmod-usb-core=y
+CONFIG_PACKAGE_kmod-leds-gpio=y
+CONFIG_PACKAGE_kmod-ledtrig-activity=y
+CONFIG_PACKAGE_kmod-ledtrig-gpio=y
+CONFIG_PACKAGE_kmod-ledtrig-oneshot=y
+CONFIG_PACKAGE_kmod-ledtrig-transient=y
+CONFIG_PACKAGE_kmod-ledtrig-disk=y
+CONFIG_PACKAGE_kmod-ledtrig-mtd=y
+CONFIG_PACKAGE_kmod-ledtrig-heartbeat=y
+CONFIG_PACKAGE_kmod-ledtrig-backlight=y
+CONFIG_PACKAGE_kmod-ledtrig-cpu=y
+CONFIG_PACKAGE_kmod-ledtrig-panic=y
+CONFIG_PACKAGE_kmod-ledtrig-netdev=y
+CONFIG_PACKAGE_kmod-ledtrig-pattern=y
+CONFIG_PACKAGE_kmod-ledtrig-audio=y
+CONFIG_PACKAGE_kmod-ipt-led=y
+CONFIG_PACKAGE_kmod-usb-ledtrig-usbport=y
+# CONFIG_PACKAGE_kmod-r8125 is not set
+CONFIG_KERNEL_ARM_MODULE_PLTS=y

config-cm520-79f

@@ -1,16 +0,0 @@
-CONFIG_TARGET_ipq40xx=y
-CONFIG_TARGET_ipq40xx_generic=y
-CONFIG_TARGET_ipq40xx_generic_DEVICE_mobipromo_cm520-79f=y
-CONFIG_TARGET_BOARD="ipq40xx"
-CONFIG_TARGET_SUBTARGET="generic"
-CONFIG_TARGET_PROFILE="DEVICE_mobipromo_cm520-79f"
-CONFIG_CPU_TYPE="cortex-a7+neon-vfpv4"
-CONFIG_DEFAULT_ath10k-firmware-qca4019-ct=y
-CONFIG_DEFAULT_ipq-wifi-mobipromo_cm520-79f=y
-CONFIG_DEFAULT_kmod-ath10k-ct=y
-CONFIG_PACKAGE_ath10k-board-qca4019=y
-CONFIG_PACKAGE_ath10k-firmware-qca4019-ct=y
-CONFIG_PACKAGE_kmod-ath10k-ct=y
-CONFIG_ATH10K-CT_LEDS=y
-CONFIG_KERNEL_ARM_MODULE_PLTS=y
-CONFIG_KERNEL_TCP_CONG_BBR2=y

config-espressobin1

@@ -1,12 +0,0 @@
-CONFIG_TARGET_ipq40xx=y
-CONFIG_TARGET_ipq40xx_generic=y
-CONFIG_TARGET_ipq40xx_generic_DEVICE_8dev_jalapeno=y
-CONFIG_TARGET_BOARD="ipq40xx"
-CONFIG_TARGET_SUBTARGET="generic"
-CONFIG_TARGET_PROFILE="DEVICE_8dev_jalapeno"
-CONFIG_TARGET_ARCH_PACKAGES="arm_cortex-a7_neon-vfpv4"
-CONFIG_PACKAGE_ath10k-board-qca4019=y
-CONFIG_PACKAGE_ath10k-firmware-qca4019-ct-htt=y
-CONFIG_PACKAGE_kmod-ath10k-ct-smallbuffers=y
-CONFIG_KERNEL_ARM_MODULE_PLTS=y
-CONFIG_KERNEL_TCP_CONG_BBR2=y

config-nanopi_neo

@@ -1,71 +0,0 @@
-CONFIG_MODULES=y
-CONFIG_HAVE_DOT_CONFIG=y
-CONFIG_TARGET_sunxi=y
-CONFIG_TARGET_sunxi_cortexa7=y
-CONFIG_TARGET_sunxi_cortexa7_DEVICE_friendlyarm_nanopi-neo=y
-CONFIG_PACKAGE_kmod-6lowpan=y
-CONFIG_HAS_SUBTARGETS=y
-CONFIG_HAS_DEVICES=y
-CONFIG_TARGET_BOARD="sunxi"
-CONFIG_TARGET_SUBTARGET="cortexa7"
-CONFIG_TARGET_PROFILE="DEVICE_friendlyarm_nanopi-neo"
-CONFIG_TARGET_ARCH_PACKAGES="arm_cortex-a7_neon-vfpv4"
-CONFIG_DEFAULT_TARGET_OPTIMIZATION="-Os -pipe"
-CONFIG_CPU_TYPE="cortex-a7+neon-vfpv4"
-CONFIG_LINUX_5_4=y
-CONFIG_DEFAULT_base-files=y
-CONFIG_DEFAULT_busybox=y
-CONFIG_DEFAULT_ca-bundle=y
-CONFIG_DEFAULT_dnsmasq=y
-CONFIG_DEFAULT_dropbear=y
-CONFIG_DEFAULT_e2fsprogs=y
-CONFIG_DEFAULT_firewall=y
-CONFIG_DEFAULT_fstools=y
-CONFIG_DEFAULT_ip6tables=y
-CONFIG_DEFAULT_iptables=y
-CONFIG_DEFAULT_kmod-ipt-offload=y
-CONFIG_DEFAULT_libc=y
-CONFIG_DEFAULT_libgcc=y
-CONFIG_DEFAULT_libustream-wolfssl=y
-CONFIG_DEFAULT_logd=y
-CONFIG_DEFAULT_mkf2fs=y
-CONFIG_DEFAULT_mtd=y
-CONFIG_DEFAULT_netifd=y
-CONFIG_DEFAULT_odhcp6c=y
-CONFIG_DEFAULT_odhcpd-ipv6only=y
-CONFIG_DEFAULT_opkg=y
-CONFIG_DEFAULT_partx-utils=y
-CONFIG_DEFAULT_ppp=y
-CONFIG_DEFAULT_ppp-mod-pppoe=y
-CONFIG_DEFAULT_uboot-envtools=y
-CONFIG_DEFAULT_uci=y
-CONFIG_DEFAULT_uclient-fetch=y
-CONFIG_DEFAULT_urandom-seed=y
-CONFIG_DEFAULT_urngd=y
-CONFIG_HAS_FPU=y
-CONFIG_AUDIO_SUPPORT=y
-CONFIG_GPIO_SUPPORT=y
-CONFIG_USB_SUPPORT=y
-CONFIG_RTC_SUPPORT=y
-CONFIG_USES_DEVICETREE=y
-CONFIG_USES_SQUASHFS=y
-CONFIG_USES_EXT4=y
-CONFIG_arm=y
-CONFIG_arm_v7=y
-CONFIG_ARCH="arm"
-CONFIG_KERNEL_ARM_MODULE_PLTS=y
-# CONFIG_PACKAGE_libustream-wolfssl is not set
-CONFIG_KERNEL_DEVMEM=y
-CONFIG_KERNEL_DEVKMEM=y
-# CONFIG_PACKAGE_luci-theme-argon=y
-CONFIG_PACKAGE_luci-theme-bootstrap=y
-CONFIG_PACKAGE_luci-theme-openwrt-2020=y
-# CONFIG_PACKAGE_luci-theme-argon is not set
-CONFIG_PACKAGE_luci-app-status=m
-CONFIG_PACKAGE_luci-mod-status=y
-CONFIG_PACKAGE_frpc=y
-CONFIG_PACKAGE_rtty-nossl=y
-CONFIG_PACKAGE_minicom=y
-CONFIG_PACKAGE_irqbalance=y
-CONFIG_PACKAGE_mtr=y
-CONFIG_KERNEL_ARM_MODULE_PLTS=y 

config-p2w_r619ac

@@ -0,0 +1,13 @@
+CONFIG_TARGET_ipq40xx=y
+CONFIG_TARGET_ipq40xx_generic=y
+CONFIG_TARGET_ipq40xx_generic_DEVICE_p2w_r619ac-128m=y
+CONFIG_PACKAGE_kmod-6lowpan=y
+# CONFIG_KERNEL_CC_OPTIMIZE_FOR_PERFORMANCE is not set
+CONFIG_KERNEL_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_PACKAGE_ipq-wifi-p2w_r619ac=y
+CONFIG_DEFAULT_ath10k-firmware-qca4019-ct=y
+CONFIG_DEFAULT_kmod-ath10k-ct=y
+CONFIG_PACKAGE_kmod-ath10k-ct=y
+CONFIG_ATH10K-CT_LEDS=y
+CONFIG_PACKAGE_ath10k-firmware-qca4019-ct=y
+CONFIG_KERNEL_ARM_MODULE_PLTS=y 

contributors/welterrocks.md

@@ -0,0 +1,9 @@
+2021-03-05
+
+I hereby agree to the terms of the "OpenMPTCProuter Individual Contributor License Agreement", with MD5 checksum bc827a07eb93611d793ddb7c75083c00.
+
+I furthermore declare that I am authorized and able to make this agreement and sign this declaration.
+
+Signed,
+
+Oliver Welter https://github.com/welterrocks

root/package/base-files/files/bin/config_generate

@@ -508,4 +508,4 @@ if [ ! -s /etc/config/system ]; then
 	json_get_keys keys led
 	for key in $keys; do generate_led $key; done
 fi
-uci commit
+uci commit

root/package/base-files/files/etc/banner

@@ -1,8 +1,39 @@
-   ___                 __  __ ___ _____ ___ ___              _           
+
-  / _ \ _ __  ___ _ _ |  \/  | _ \_   _/ __| _ \_ _ ___ _  _| |_ ___ _ _ 
+/***
- | (_) | '_ \/ -_) ' \| |\/| |  _/ | || (__|  _/ '_/ _ \ || |  _/ -_) '_|
+ *                                         ,s555SB@@&                          
-  \___/| .__/\___|_||_|_|  |_|_|   |_| \___|_| |_| \___/\_,_|\__\___|_|  
+ *                                      :9H####@@@@@Xi                        
-       |_|                                                               
+ *                                     1@@@@@@@@@@@@@@8                       
+ *                                   ,8@@@@@@@@@B@@@@@@8                      
+ *                                  :B@@@@X3hi8Bs;B@@@@@Ah,                   
+ *             ,8i                  r@@@B:     1S ,M@@@@@@#8;                 
+ *            1AB35.i:               X@@8 .   SGhr ,A@@@@@@@@S                
+ *            1@h31MX8                18Hhh3i .i3r ,A@@@@@@@@@5               
+ *            ;@&i,58r5                 rGSS:     :B@@@@@@@@@@A               
+ *             1#i  . 9i                 hX.  .: .5@@@@@@@@@@@1               
+ *              sG1,  ,G53s.              9#Xi;hS5 3B@@@@@@@B1                
+ *               .h8h.,A@@@MXSs,           #@H1:    3ssSSX@1                  
+ *               s ,@@@@@@@@@@@@Xhi,       r#@@X1s9M8    .GA981               
+ *               ,. rS8H#@@@@@@@@@@#HG51;.  .h31i;9@r    .8@@@@BS;i;          
+ *                .19AXXXAB@@@@@@@@@@@@@@#MHXG893hrX#XGGXM@@@@@@@@@@MS        
+ *                s@@MM@@@hsX#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&,      
+ *              :GB@#3G@@Brs ,1GM@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@B,     
+ *            .hM@@@#@@#MX 51  r;iSGAM@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@8     
+ *          :3B@@@@@@@@@@@&9@h :Gs   .;sSXH@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@:    
+ *      s&HA#@@@@@@@@@@@@@@M89A;.8S.       ,r3@@@@@@@@@@@@@@@@@@@@@@@@@@@r    
+ *   ,13B@@@@@@@@@@@@@@@@@@@5 5B3 ;.         ;@@@@@@@@@@@@@@@@@@@@@@@@@@@i    
+ *  5#@@#&@@@@@@@@@@@@@@@@@@9  .39:          ;@@@@@@@@@@@@@@@@@@@@@@@@@@@;    
+ *  9@@@X:MM@@@@@@@@@@@@@@@#;    ;31.         H@@@@@@@@@@@@@@@@@@@@@@@@@@:    
+ *   SH#@B9.rM@@@@@@@@@@@@@B       :.         3@@@@@@@@@@@@@@@@@@@@@@@@@@5    
+ *     ,:.   9@@@@@@@@@@@#HB5                 .M@@@@@@@@@@@@@@@@@@@@@@@@@B    
+ *           ,ssirhSM@&1;i19911i,.             s@@@@@@@@@@@@@@@@@@@@@@@@@@S   
+ *              ,,,rHAri1h1rh&@#353Sh:          8@@@@@@@@@@@@@@@@@@@@@@@@@#:  
+ *            .A3hH@#5S553&@@#h   i:i9S          #@@@@@@@@@@@@@@@@@@@@@@@@@A.
+ *
+ *
+ *    又看源码，看你妹妹呀！
+ */
+
 ------------------------------------------------------------------------------
-   (%C)
+55860.com   QQ 175338181 weixin:xinyangla
+(%C)
 ------------------------------------------------------------------------------

root/package/base-files/files/etc/board.d/99-default_network

@@ -1,16 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-json_is_a network object && exit 0
-
-ucidef_set_interface_lan 'eth0'
-
-board_config_flush
-
-exit 0

root/package/base-files/files/etc/shadow

@@ -0,0 +1,5 @@
+root:$1$ie.8vTnt$7EzhI1ZYiwp8hSAC4eSId0:18473:0:99999:7:::
+daemon:*:0:0:99999:7:::
+ftp:*:0:0:99999:7:::
+network:*:0:0:99999:7:::
+nobody:*:0:0:99999:7:::

root/package/base-files/files/sbin/sysupgrade

@@ -1,397 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/system.sh
-. /usr/share/libubox/jshn.sh
-
-# initialize defaults
-export MTD_ARGS=""
-export MTD_CONFIG_ARGS=""
-export INTERACTIVE=0
-export VERBOSE=1
-export SAVE_CONFIG=1
-export SAVE_OVERLAY=0
-export SAVE_OVERLAY_PATH=
-export SAVE_PARTITIONS=1
-export SAVE_INSTALLED_PKGS=1
-export SKIP_UNCHANGED=0
-export CONF_IMAGE=
-export CONF_BACKUP_LIST=0
-export CONF_BACKUP=
-export CONF_RESTORE=
-export NEED_IMAGE=
-export HELP=0
-export FORCE=0
-export TEST=0
-export UMOUNT_ETCBACKUP_DIR=0
-
-# parse options
-while [ -n "$1" ]; do
-	case "$1" in
-		-i) export INTERACTIVE=1;;
-		-v) export VERBOSE="$(($VERBOSE + 1))";;
-		-q) export VERBOSE="$(($VERBOSE - 1))";;
-		-n) export SAVE_CONFIG=0;;
-		-c) export SAVE_OVERLAY=1 SAVE_OVERLAY_PATH=/etc;;
-		-o) export SAVE_OVERLAY=1 SAVE_OVERLAY_PATH=/;;
-		-p) export SAVE_PARTITIONS=0;;
-		-k) export SAVE_INSTALLED_PKGS=1;;
-		-u) export SKIP_UNCHANGED=1;;
-		-b|--create-backup) export CONF_BACKUP="$2" NEED_IMAGE=1; shift;;
-		-r|--restore-backup) export CONF_RESTORE="$2" NEED_IMAGE=1; shift;;
-		-l|--list-backup) export CONF_BACKUP_LIST=1;;
-		-f) export CONF_IMAGE="$2"; shift;;
-		-F|--force) export FORCE=1;;
-		-T|--test) export TEST=1;;
-		-h|--help) export HELP=1; break;;
-		-*)
-			echo "Invalid option: $1" >&2
-			exit 1
-		;;
-		*) break;;
-	esac
-	shift;
-done
-
-export CONFFILES=/tmp/sysupgrade.conffiles
-export CONF_TAR=/tmp/sysupgrade.tgz
-export ETCBACKUP_DIR=/etc/backup
-export INSTALLED_PACKAGES=${ETCBACKUP_DIR}/installed_packages.txt
-
-IMAGE="$1"
-
-[ -z "$IMAGE" -a -z "$NEED_IMAGE" -a $CONF_BACKUP_LIST -eq 0 -o $HELP -gt 0 ] && {
-	cat <<EOF
-Usage: $0 [<upgrade-option>...] <image file or URL>
-       $0 [-q] [-i] [-c] [-u] [-o] [-k] <backup-command> <file>
-
-upgrade-option:
-	-f <config>  restore configuration from .tar.gz (file or url)
-	-i           interactive mode
-	-c           attempt to preserve all changed files in /etc/
-	-o           attempt to preserve all changed files in /, except those
-	             from packages but including changed confs.
-	-u           skip from backup files that are equal to those in /rom
-	-n           do not save configuration over reflash
-	-p           do not attempt to restore the partition table after flash.
-	-k           include in backup a list of current installed packages at
-	             $INSTALLED_PACKAGES
-	-T | --test
-	             Verify image and config .tar.gz but do not actually flash.
-	-F | --force
-	             Flash image even if image checks fail, this is dangerous!
-	-q           less verbose
-	-v           more verbose
-	-h | --help  display this help
-
-backup-command:
-	-b | --create-backup <file>
-	             create .tar.gz of files specified in sysupgrade.conf
-	             then exit. Does not flash an image. If file is '-',
-	             i.e. stdout, verbosity is set to 0 (i.e. quiet).
-	-r | --restore-backup <file>
-	             restore a .tar.gz created with sysupgrade -b
-	             then exit. Does not flash an image. If file is '-',
-	             the archive is read from stdin.
-	-l | --list-backup
-	             list the files that would be backed up when calling
-	             sysupgrade -b. Does not create a backup file.
-
-EOF
-	exit 1
-}
-
-[ -n "$IMAGE" -a -n "$NEED_IMAGE" ] && {
-	cat <<-EOF
-		-b|--create-backup and -r|--restore-backup do not perform a firmware upgrade.
-		Do not specify both -b|-r and a firmware image.
-	EOF
-	exit 1
-}
-
-# prevent messages from clobbering the tarball when using stdout
-[ "$CONF_BACKUP" = "-" ] && export VERBOSE=0
-
-missing_lines() {
-	local file1 file2 line
-	file1="$1"
-	file2="$2"
-	oIFS="$IFS"
-	IFS=":"
-	while read line; do
-		set -- $line
-		grep -q "^$1:" "$file2" || echo "$*"
-	done < "$file1"
-	IFS="$oIFS"
-}
-
-list_conffiles() {
-	awk '
-		BEGIN { conffiles = 0 }
-		/^Conffiles:/ { conffiles = 1; next }
-		!/^ / { conffiles = 0; next }
-		conffiles == 1 { print }
-	' /usr/lib/opkg/status
-}
-
-list_changed_conffiles() {
-	# Cannot handle spaces in filenames - but opkg cannot either...
-	list_conffiles | while read file csum; do
-		[ -r "$file" ] || continue
-
-		echo "${csum}  ${file}" | busybox sha256sum -sc - || echo "$file"
-	done
-}
-
-list_static_conffiles() {
-	local filter=$1
-
-	find $(sed -ne '/^[[:space:]]*$/d; /^#/d; p' \
-		/etc/sysupgrade.conf /lib/upgrade/keep.d/* 2>/dev/null) \
-		\( -type f -o -type l \) $filter 2>/dev/null
-}
-
-add_conffiles() {
-	local file="$1"
-
-	( list_static_conffiles "$find_filter"; list_changed_conffiles ) |
-		sort -u > "$file"
-	return 0
-}
-
-add_overlayfiles() {
-	local file="$1"
-
-	local packagesfiles=$1.packagesfiles
-	touch "$packagesfiles"
-
-	if [ "$SAVE_OVERLAY_PATH" = / ]; then
-		local conffiles=$1.conffiles
-		local keepfiles=$1.keepfiles
-
-		list_conffiles | cut -f2 -d ' ' | sort -u > "$conffiles"
-
-		# backup files from /etc/sysupgrade.conf and /lib/upgrade/keep.d, but
-		# ignore those aready controlled by opkg conffiles
-		list_static_conffiles | sort -u |
-			grep -h -v -x -F -f $conffiles > "$keepfiles"
-
-		# backup conffiles, but only those changed if '-u'
-		[ $SKIP_UNCHANGED = 1 ] &&
-			list_changed_conffiles | sort -u > "$conffiles"
-
-		# do not backup files from packages, except those listed
-		# in conffiles and keep.d
-		{
-			find /usr/lib/opkg/info -type f -name "*.list" -exec cat {} \;
-			find /usr/lib/opkg/info -type f -name "*.control" -exec sed \
-				-ne '/^Alternatives/{s/^Alternatives: //;s/, /\n/g;p}' {} \; |
-				cut -f2 -d:
-		} |  grep -v -x -F -f $conffiles |
-		     grep -v -x -F -f $keepfiles | sort -u > "$packagesfiles"
-		rm -f "$keepfiles" "$conffiles"
-	fi
-
-	# busybox grep bug when file is empty
-	[ -s "$packagesfiles" ] || echo > $packagesfiles
-
-	( cd /overlay/upper/; find .$SAVE_OVERLAY_PATH \( -type f -o -type l \) $find_filter | sed \
-		-e 's,^\.,,' \
-		-e '\,^/etc/board.json$,d' \
-		-e '\,/[^/]*-opkg$,d' \
-		-e '\,^/etc/urandom.seed$,d' \
-		-e "\,^$INSTALLED_PACKAGES$,d" \
-		-e '\,^/usr/lib/opkg/.*,d' \
-	) | grep -v -x -F -f $packagesfiles > "$file"
-
-	rm -f "$packagesfiles"
-
-	return 0
-}
-
-if [ $SAVE_OVERLAY = 1 ]; then
-	[ ! -d /overlay/upper/etc ] && {
-		echo "Cannot find '/overlay/upper/etc', required for '-c'" >&2
-		exit 1
-	}
-	sysupgrade_init_conffiles="add_overlayfiles"
-else
-	sysupgrade_init_conffiles="add_conffiles"
-fi
-
-find_filter=""
-if [ $SKIP_UNCHANGED = 1 ]; then
-	[ ! -d /rom/ ] && {
-		echo "'/rom/' is required by '-u'"
-		exit 1
-	}
-	find_filter='( ( -exec test -e /rom/{} ; -exec cmp -s /{} /rom/{} ; ) -o -print )'
-fi
-
-include /lib/upgrade
-
-do_save_conffiles() {
-	local conf_tar="$1"
-
-	[ "$(rootfs_type)" = "tmpfs" ] && {
-		echo "Cannot save config while running from ramdisk." >&2
-		ask_bool 0 "Abort" && exit
-		rm -f "$conf_tar"
-		return 0
-	}
-	run_hooks "$CONFFILES" $sysupgrade_init_conffiles
-	ask_bool 0 "Edit config file list" && vi "$CONFFILES"
-
-	if [ "$SAVE_INSTALLED_PKGS" -eq 1 ]; then
-		echo "${INSTALLED_PACKAGES}" >> "$CONFFILES"
-		mkdir -p "$ETCBACKUP_DIR"
-		# Avoid touching filesystem on each backup
-		RAMFS="$(mktemp -d -t sysupgrade.XXXXXX)"
-		mkdir -p "$RAMFS/upper" "$RAMFS/work"
-		mount -t overlay overlay -o lowerdir=$ETCBACKUP_DIR,upperdir=$RAMFS/upper,workdir=$RAMFS/work $ETCBACKUP_DIR &&
-			UMOUNT_ETCBACKUP_DIR=1 || {
-				echo "Cannot mount '$ETCBACKUP_DIR' as tmpfs to avoid touching disk while saving the list of installed packages." >&2
-				ask_bool 0 "Abort" && exit
-			}
-
-		# Format: pkg-name<TAB>{rom,overlay,unkown}
-		# rom is used for pkgs in /rom, even if updated later
-		find /usr/lib/opkg/info -name "*.control" \( \
-			\( -exec test -f /rom/{} \; -exec echo {} rom \; \) -o \
-			\( -exec test -f /overlay/upper/{} \; -exec echo {} overlay \; \) -o \
-			\( -exec echo {} unknown \; \) \
-			\) | sed -e 's,.*/,,;s/\.control /\t/' > ${INSTALLED_PACKAGES}
-	fi
-
-	v "Saving config files..."
-	[ "$VERBOSE" -gt 1 ] && TAR_V="v" || TAR_V=""
-	tar c${TAR_V}zf "$conf_tar" -T "$CONFFILES" 2>/dev/null
-	if [ "$?" -ne 0 ]; then
-		echo "Failed to create the configuration backup."
-		rm -f "$conf_tar"
-		exit 1
-	fi
-
-	[ "$UMOUNT_ETCBACKUP_DIR" -eq 1 ] && {
-		umount "$ETCBACKUP_DIR"
-		rm -rf "$RAMFS"
-	}
-	rm -f "$CONFFILES"
-}
-
-if [ $CONF_BACKUP_LIST -eq 1 ]; then
-	run_hooks "$CONFFILES" $sysupgrade_init_conffiles
-	[ "$SAVE_INSTALLED_PKGS" -eq 1 ] && echo ${INSTALLED_PACKAGES} >> "$CONFFILES"
-	cat "$CONFFILES"
-	rm -f "$CONFFILES"
-	exit 0
-fi
-
-if [ -n "$CONF_BACKUP" ]; then
-	do_save_conffiles "$CONF_BACKUP"
-	exit $?
-fi
-
-if [ -n "$CONF_RESTORE" ]; then
-	if [ "$CONF_RESTORE" != "-" ] && [ ! -f "$CONF_RESTORE" ]; then
-		echo "Backup archive '$CONF_RESTORE' not found." >&2
-		exit 1
-	fi
-
-	[ "$VERBOSE" -gt 1 ] && TAR_V="v" || TAR_V=""
-	cp /etc/passwd /etc/group /etc/shadow /tmp
-	tar -C / -x${TAR_V}zf "$CONF_RESTORE"
-	missing_lines /tmp/passwd /etc/passwd >> /etc/passwd
-	missing_lines /tmp/group /etc/group >> /etc/group
-	missing_lines /tmp/shadow /etc/shadow >> /etc/shadow
-	rm /tmp/passwd /tmp/group /tmp/shadow
-
-	exit $?
-fi
-
-type platform_check_image >/dev/null 2>/dev/null || {
-	echo "Firmware upgrade is not implemented for this platform." >&2
-	exit 1
-}
-
-case "$IMAGE" in
-	http://*|\
-	https://*)
-		wget -O/tmp/sysupgrade.img "$IMAGE" || exit 1
-		IMAGE=/tmp/sysupgrade.img
-		;;
-esac
-
-IMAGE="$(readlink -f "$IMAGE")"
-
-case "$IMAGE" in
-	'')
-		echo "Image file not found." >&2
-		exit 1
-		;;
-	/tmp/*)	;;
-	*)
-		v "Image not in /tmp, copying..."
-		cp -f "$IMAGE" /tmp/sysupgrade.img
-		IMAGE=/tmp/sysupgrade.img
-		;;
-esac
-
-json_load "$(/usr/libexec/validate_firmware_image "$IMAGE")" || {
-	echo "Failed to check image"
-	exit 1
-}
-json_get_var valid "valid"
-[ "$valid" -eq 0 ] && {
-	if [ $FORCE -eq 1 ]; then
-		echo "Image check failed but --force given - will update anyway!" >&2
-	else
-		echo "Image check failed." >&2
-		exit 1
-	fi
-}
-
-if [ -n "$CONF_IMAGE" ]; then
-	case "$(get_magic_word $CONF_IMAGE cat)" in
-		# .gz files
-		1f8b) ;;
-		*)
-			echo "Invalid config file. Please use only .tar.gz files" >&2
-			exit 1
-		;;
-	esac
-	get_image "$CONF_IMAGE" "cat" > "$CONF_TAR"
-	export SAVE_CONFIG=1
-elif ask_bool $SAVE_CONFIG "Keep config files over reflash"; then
-	[ $TEST -eq 1 ] || do_save_conffiles "$CONF_TAR"
-	export SAVE_CONFIG=1
-else
-	[ $TEST -eq 1 ] || rm -f "$CONF_TAR"
-	export SAVE_CONFIG=0
-fi
-
-if [ $TEST -eq 1 ]; then
-	exit 0
-fi
-
-install_bin /sbin/upgraded
-v "Commencing upgrade. Closing all shell sessions."
-
-COMMAND='/lib/upgrade/do_stage2'
-
-if [ -n "$FAILSAFE" ]; then
-	printf '%s\x00%s\x00%s' "$RAM_ROOT" "$IMAGE" "$COMMAND" >/tmp/sysupgrade
-	lock -u /tmp/.failsafe
-else
-	json_init
-	json_add_string prefix "$RAM_ROOT"
-	json_add_string path "$IMAGE"
-	[ $FORCE -eq 1 ] && json_add_boolean force 1
-	[ $SAVE_CONFIG -eq 1 ] && json_add_string backup "$CONF_TAR"
-	json_add_string command "$COMMAND"
-	json_add_object options
-	json_add_int save_partitions "$SAVE_PARTITIONS"
-	json_close_object
-
-	ubus call system sysupgrade "$(json_dump)"
-fi

root/package/firmware/ipq-wifi/Makefile

@@ -30,20 +30,24 @@ ALLWIFIBOARDS:= \
 	avm_fritzrepeater-1200 \
 	buffalo_wtr-m2133hp \
 	cellc_rtl30vw \
+	devolo_magic-2-wifi-next \
 	dlink_dap2610 \
+	edgecore_ecw5410 \
+	edgecore_oap100 \
 	engenius_eap2200 \
 	engenius_emd1 \
 	engenius_emr3500 \
 	ezviz_cs-w3-wd1200g-eup \
+	glinet_gl-ap1300 \
 	glinet_gl-s1300 \
 	linksys_ea8300 \
-	p2w_r619ac \
+	linksys_mr8300-v0 \
+	luma_wrtq-329acn \
 	mobipromo_cm520-79f \
 	nec_wg2600hp3 \
 	plasmacloud_pa1200 \
 	plasmacloud_pa2200 \
   pangu_l1000 \
-  p2w_r619ac \
 	qxwlan_e2600ac
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@@ -52,7 +56,7 @@ define Package/ipq-wifi-default
   SUBMENU:=ath10k Board-Specific Overrides
   SECTION:=firmware
   CATEGORY:=Firmware
-  DEPENDS:=@TARGET_ipq40xx
+  DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
   TITLE:=Custom Board
 endef
 
@@ -110,16 +114,24 @@ $(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
 $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
 $(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
 $(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
 $(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
 $(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
 $(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
 $(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
 $(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
 $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
+$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
 $(eval $(call generate-ipq-wifi-package,pangu_l1000,PANGU L1000))
-$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
 
-$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
+$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

root/package/network/ipv6/6in4/Makefile

@@ -1,45 +0,0 @@
-#
-# Copyright (C) 2010-2015 OpenWrt.org
-# Copyright (C) 2018-2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
-# - Added gateway setting
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=6in4
-PKG_VERSION:=270
-PKG_RELEASE:=2
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/6in4
-  SECTION:=net
-  CATEGORY:=Network
-  DEPENDS:=@IPV6 +kmod-sit +uclient-fetch
-  TITLE:=IPv6-in-IPv4 configuration support
-  MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
-  PKGARCH:=all
-endef
-
-define Package/6in4/description
-Provides support for 6in4 tunnels in /etc/config/network.
-Refer to http://wiki.openwrt.org/doc/uci/network for
-configuration details.
-endef
-
-define Build/Compile
-endef
-
-define Build/Configure
-endef
-
-define Package/6in4/install
-	$(INSTALL_DIR) $(1)/lib/netifd/proto
-	$(INSTALL_BIN) ./files/6in4.sh $(1)/lib/netifd/proto/6in4.sh
-endef
-
-$(eval $(call BuildPackage,6in4))

root/package/network/ipv6/6in4/files/6in4.sh

@@ -1,149 +0,0 @@
-#!/bin/sh
-# 6in4.sh - IPv6-in-IPv4 tunnel backend
-# Copyright (c) 2010-2015 OpenWrt.org
-
-[ -n "$INCLUDE_ONLY" ] || {
-	. /lib/functions.sh
-	. /lib/functions/network.sh
-	. ../netifd-proto.sh
-	init_proto "$@"
-}
-
-proto_6in4_update() {
-	sh -c '
-		timeout=5
-
-		(while [ $((timeout--)) -gt 0 ]; do
-			sleep 1
-			kill -0 $$ || exit 0
-		done; kill -9 $$) 2>/dev/null &
-
-		exec "$@"
-	' "$1" "$@"
-}
-
-proto_6in4_add_prefix() {
-	append "$3" "$1"
-}
-
-proto_6in4_setup() {
-	local cfg="$1"
-	local iface="$2"
-	local link="6in4-$cfg"
-
-	local mtu ttl tos ipaddr peeraddr ip6addr ip6prefix ip6prefixes tunlink tunnelid username password updatekey gateway
-	json_get_vars mtu ttl tos ipaddr peeraddr ip6addr tunlink tunnelid username password updatekey gateway
-	json_for_each_item proto_6in4_add_prefix ip6prefix ip6prefixes
-
-	[ -z "$peeraddr" ] && {
-		proto_notify_error "$cfg" "MISSING_ADDRESS"
-		proto_block_restart "$cfg"
-		return
-	}
-
-	[ -n "$tunlink" ] && ( proto_add_host_dependency "$cfg" "$peeraddr" "$tunlink" )
-
-	[ -z "$ipaddr" ] && {
-		local wanif="$tunlink"
-		if [ -z "$wanif" ] && ! network_find_wan wanif; then
-			proto_notify_error "$cfg" "NO_WAN_LINK"
-			return
-		fi
-
-		if ! network_get_ipaddr ipaddr "$wanif"; then
-			proto_notify_error "$cfg" "NO_WAN_LINK"
-			return
-		fi
-	}
-
-	proto_init_update "$link" 1
-
-	[ -n "$ip6addr" ] && {
-		local local6="${ip6addr%%/*}"
-		local mask6="${ip6addr##*/}"
-		[[ "$local6" = "$mask6" ]] && mask6=
-		proto_add_ipv6_address "$local6" "$mask6"
-		proto_add_ipv6_route "::" 0 "" "" "" "$local6/$mask6"
-	}
-
-	[ -n "$gateway" ] && {
-		proto_add_ipv6_route "::" 0 "$gateway"
-	}
-
-	for ip6prefix in $ip6prefixes; do
-		proto_add_ipv6_prefix "$ip6prefix"
-		proto_add_ipv6_route "::" 0 "" "" "" "$ip6prefix"
-	done
-
-	proto_add_tunnel
-	json_add_string mode sit
-	json_add_int mtu "${mtu:-1280}"
-	json_add_int ttl "${ttl:-64}"
-	[ -n "$tos" ] && json_add_string tos "$tos"
-	json_add_string local "$ipaddr"
-	json_add_string remote "$peeraddr"
-	[ -n "$tunlink" ] && json_add_string link "$tunlink"
-	proto_close_tunnel
-
-	proto_send_update "$cfg"
-
-	[ -n "$tunnelid" -a -n "$username" -a \( -n "$password" -o -n "$updatekey" \) ] && {
-		[ -n "$updatekey" ] && password="$updatekey"
-
-		local http="http"
-		local urlget="uclient-fetch"
-		local urlget_opts="-qO-"
-		local ca_path="${SSL_CERT_DIR:-/etc/ssl/certs}"
-
-		[ -f /lib/libustream-ssl.so ] && http=https
-		[ "$http" = "https" -a -z "$(find $ca_path -name "*.0" 2>/dev/null)" ] && {
-			urlget_opts="$urlget_opts --no-check-certificate"
-		}
-
-		local url="$http://ipv4.tunnelbroker.net/nic/update?hostname=$tunnelid"
-		local try=0
-		local max=3
-
-		(
-			set -o pipefail
-			while [ $((++try)) -le $max ]; do
-				if proto_6in4_update $urlget $urlget_opts --user="$username" --password="$password" "$url" 2>&1 | \
-					sed -e 's,^Killed$,timeout,' -e "s,^,update $try/$max: ," | \
-					logger -t "$link";
-				then
-					logger -t "$link" "updated"
-					return 0
-				fi
-				sleep 5
-			done
-			logger -t "$link" "update failed"
-		)
-	}
-}
-
-proto_6in4_teardown() {
-	local cfg="$1"
-}
-
-proto_6in4_init_config() {
-	no_device=1
-	available=1
-
-	proto_config_add_string "ipaddr"
-	proto_config_add_string "ip6addr"
-	proto_config_add_array "ip6prefix"
-	proto_config_add_string "peeraddr"
-	proto_config_add_string "tunlink"
-	proto_config_add_string "tunnelid"
-	proto_config_add_string "username"
-	proto_config_add_string "password"
-	proto_config_add_string "updatekey"
-	proto_config_add_string "gateway"
-	proto_config_add_int "mtu"
-	proto_config_add_int "ttl"
-	proto_config_add_string "tos"
-}
-
-[ -n "$INCLUDE_ONLY" ] || {
-	add_protocol 6in4
-}

root/rules.mk

@@ -1,432 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-# Copyright (C) 2016 LEDE Project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-ifneq ($(__rules_inc),1)
-__rules_inc=1
-
-ifeq ($(DUMP),)
-  -include $(TOPDIR)/.config
-endif
-include $(TOPDIR)/include/debug.mk
-include $(TOPDIR)/include/verbose.mk
-
-ifneq ($(filter check,$(MAKECMDGOALS)),)
-CHECK:=1
-DUMP:=1
-endif
-
-export TMP_DIR:=$(TOPDIR)/tmp
-export TMPDIR:=$(TMP_DIR)
-
-qstrip=$(strip $(subst ",,$(1)))
-#"))
-
-empty:=
-space:= $(empty) $(empty)
-comma:=,
-merge=$(subst $(space),,$(1))
-confvar=$(shell echo '$(foreach v,$(1),$(v)=$(subst ','\'',$($(v))))' | $(STAGING_DIR_HOST)/bin/mkhash md5)
-strip_last=$(patsubst %.$(lastword $(subst .,$(space),$(1))),%,$(1))
-
-paren_left = (
-paren_right = )
-chars_lower = a b c d e f g h i j k l m n o p q r s t u v w x y z
-chars_upper = A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
-
-define sep
-
-endef
-
-define newline
-
-
-endef
-
-__tr_list = $(join $(join $(1),$(foreach char,$(1),$(comma))),$(2))
-__tr_head_stripped = $(subst $(space),,$(foreach cv,$(call __tr_list,$(1),$(2)),$$$(paren_left)subst$(cv)$(comma)))
-__tr_head = $(subst $(paren_left)subst,$(paren_left)subst$(space),$(__tr_head_stripped))
-__tr_tail = $(subst $(space),,$(foreach cv,$(1),$(paren_right)))
-__tr_template = $(__tr_head)$$(1)$(__tr_tail)
-
-$(eval toupper = $(call __tr_template,$(chars_lower),$(chars_upper)))
-$(eval tolower = $(call __tr_template,$(chars_upper),$(chars_lower)))
-
-version_abbrev = $(if $(if $(CHECK),,$(DUMP)),$(1),$(shell printf '%.8s' $(1)))
-
-_SINGLE=export MAKEFLAGS=$(space);
-CFLAGS:=
-ARCH:=$(subst i486,i386,$(subst i586,i386,$(subst i686,i386,$(call qstrip,$(CONFIG_ARCH)))))
-ARCH_PACKAGES:=$(call qstrip,$(CONFIG_TARGET_ARCH_PACKAGES))
-BOARD:=$(call qstrip,$(CONFIG_TARGET_BOARD))
-SUBTARGET:=$(call qstrip,$(CONFIG_TARGET_SUBTARGET))
-TARGET_OPTIMIZATION:=$(call qstrip,$(CONFIG_TARGET_OPTIMIZATION))
-export EXTRA_OPTIMIZATION:=$(filter-out -fno-plt,$(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION)))
-TARGET_SUFFIX=$(call qstrip,$(CONFIG_TARGET_SUFFIX))
-BUILD_SUFFIX:=$(call qstrip,$(CONFIG_BUILD_SUFFIX))
-SUBDIR:=$(patsubst $(TOPDIR)/%,%,${CURDIR})
-BUILD_SUBDIR:=$(patsubst $(TOPDIR)/%,%,${CURDIR})
-NPROC:=$(shell sysctl -n hw.ncpu 2>/dev/null || nproc)
-export SHELL:=/usr/bin/env bash
-
-IS_PACKAGE_BUILD := $(if $(filter package/%,$(BUILD_SUBDIR)),1)
-
-OPTIMIZE_FOR_CPU=$(subst i386,i486,$(ARCH))
-
-ifneq (,$(findstring $(ARCH) , aarch64 aarch64_be powerpc ))
-  FPIC:=-fPIC
-else
-  FPIC:=-fpic
-endif
-
-HOST_FPIC:=-fPIC
-
-ARCH_SUFFIX:=$(call qstrip,$(CONFIG_CPU_TYPE))
-GCC_ARCH:=
-
-ifneq ($(ARCH_SUFFIX),)
-  ARCH_SUFFIX:=_$(ARCH_SUFFIX)
-endif
-ifneq ($(filter -march=armv%,$(TARGET_OPTIMIZATION)),)
-  GCC_ARCH:=$(patsubst -march=%,%,$(filter -march=armv%,$(TARGET_OPTIMIZATION)))
-endif
-ifdef CONFIG_HAS_SPE_FPU
-  TARGET_SUFFIX:=$(TARGET_SUFFIX)spe
-endif
-ifdef CONFIG_MIPS64_ABI
-  ifneq ($(CONFIG_MIPS64_ABI_O32),y)
-     ARCH_SUFFIX:=$(ARCH_SUFFIX)_$(call qstrip,$(CONFIG_MIPS64_ABI))
-  endif
-endif
-
-DEFAULT_SUBDIR_TARGETS:=clean download prepare compile update refresh prereq dist distcheck configure check check-depends
-
-define DefaultTargets
-$(foreach t,$(DEFAULT_SUBDIR_TARGETS) $(1),
-  .$(t):
-  $(t): .$(t)
-  .PHONY: $(t) .$(t)
-)
-endef
-
-DL_DIR:=$(if $(call qstrip,$(CONFIG_DOWNLOAD_FOLDER)),$(call qstrip,$(CONFIG_DOWNLOAD_FOLDER)),$(TOPDIR)/dl)
-OUTPUT_DIR:=$(if $(call qstrip,$(CONFIG_BINARY_FOLDER)),$(call qstrip,$(CONFIG_BINARY_FOLDER)),$(TOPDIR)/bin)
-BIN_DIR:=$(OUTPUT_DIR)/targets/$(BOARD)/$(SUBTARGET)
-INCLUDE_DIR:=$(TOPDIR)/include
-SCRIPT_DIR:=$(TOPDIR)/scripts
-BUILD_DIR_BASE:=$(TOPDIR)/build_dir
-ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
-  GCCV:=$(call qstrip,$(CONFIG_GCC_VERSION))
-  LIBC:=$(call qstrip,$(CONFIG_LIBC))
-  REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-openwrt-linux$(if $(TARGET_SUFFIX),-$(TARGET_SUFFIX))
-  GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-openwrt-linux
-  DIR_SUFFIX:=_$(LIBC)$(if $(CONFIG_arm),_eabi)
-  BIN_DIR:=$(BIN_DIR)$(if $(CONFIG_USE_MUSL),,-$(LIBC))
-  TARGET_DIR_NAME = target-$(ARCH)$(ARCH_SUFFIX)$(DIR_SUFFIX)$(if $(BUILD_SUFFIX),_$(BUILD_SUFFIX))
-  TOOLCHAIN_DIR_NAME = toolchain-$(ARCH)$(ARCH_SUFFIX)_gcc-$(GCCV)$(DIR_SUFFIX)
-else
-  ifeq ($(CONFIG_NATIVE_TOOLCHAIN),)
-    GNU_TARGET_NAME=$(call qstrip,$(CONFIG_TARGET_NAME))
-  else
-    GNU_TARGET_NAME=$(shell gcc -dumpmachine)
-  endif
-  REAL_GNU_TARGET_NAME=$(GNU_TARGET_NAME)
-  LIBC:=$(call qstrip,$(CONFIG_LIBC))
-  TARGET_DIR_NAME:=target-$(GNU_TARGET_NAME)_$(LIBC)$(if $(BUILD_SUFFIX),_$(BUILD_SUFFIX))
-  TOOLCHAIN_DIR_NAME:=toolchain-$(GNU_TARGET_NAME)
-endif
-
-ifeq ($(or $(CONFIG_EXTERNAL_TOOLCHAIN),$(CONFIG_TARGET_uml)),)
-  ifeq ($(CONFIG_GCC_USE_IREMAP),y)
-    iremap = -iremap$(1):$(2)
-  else
-    iremap = -f$(if $(CONFIG_REPRODUCIBLE_DEBUG_INFO),file,macro)-prefix-map=$(1)=$(2)
-  endif
-endif
-
-PACKAGE_DIR:=$(BIN_DIR)/packages
-PACKAGE_DIR_ALL:=$(TOPDIR)/staging_dir/packages/$(BOARD)
-BUILD_DIR:=$(BUILD_DIR_BASE)/$(TARGET_DIR_NAME)
-STAGING_DIR:=$(TOPDIR)/staging_dir/$(TARGET_DIR_NAME)
-BUILD_DIR_TOOLCHAIN:=$(BUILD_DIR_BASE)/$(TOOLCHAIN_DIR_NAME)
-TOOLCHAIN_DIR:=$(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME)
-STAMP_DIR:=$(BUILD_DIR)/stamp
-STAMP_DIR_HOST=$(BUILD_DIR_HOST)/stamp
-TARGET_ROOTFS_DIR?=$(if $(call qstrip,$(CONFIG_TARGET_ROOTFS_DIR)),$(call qstrip,$(CONFIG_TARGET_ROOTFS_DIR)),$(BUILD_DIR))
-TARGET_DIR:=$(TARGET_ROOTFS_DIR)/root-$(BOARD)
-STAGING_DIR_ROOT:=$(STAGING_DIR)/root-$(BOARD)
-STAGING_DIR_IMAGE:=$(STAGING_DIR)/image
-BUILD_LOG_DIR:=$(if $(call qstrip,$(CONFIG_BUILD_LOG_DIR)),$(call qstrip,$(CONFIG_BUILD_LOG_DIR)),$(TOPDIR)/logs)
-PKG_INFO_DIR := $(STAGING_DIR)/pkginfo
-
-BUILD_DIR_HOST:=$(if $(IS_PACKAGE_BUILD),$(BUILD_DIR_BASE)/hostpkg,$(BUILD_DIR_BASE)/host)
-STAGING_DIR_HOST:=$(TOPDIR)/staging_dir/host
-STAGING_DIR_HOSTPKG:=$(TOPDIR)/staging_dir/hostpkg
-
-TARGET_PATH:=$(subst $(space),:,$(filter-out .,$(filter-out ./,$(subst :,$(space),$(PATH)))))
-TARGET_INIT_PATH:=$(call qstrip,$(CONFIG_TARGET_INIT_PATH))
-TARGET_INIT_PATH:=$(if $(TARGET_INIT_PATH),$(TARGET_INIT_PATH),/usr/sbin:/sbin:/usr/bin:/bin)
-TARGET_CFLAGS:=$(TARGET_OPTIMIZATION)$(if $(CONFIG_DEBUG), -g3) $(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION))
-TARGET_CXXFLAGS = $(TARGET_CFLAGS)
-TARGET_ASFLAGS_DEFAULT = $(TARGET_CFLAGS)
-TARGET_ASFLAGS = $(TARGET_ASFLAGS_DEFAULT)
-TARGET_CPPFLAGS:=-I$(STAGING_DIR)/usr/include
-TARGET_LDFLAGS:=-L$(STAGING_DIR)/usr/lib -L$(STAGING_DIR)/lib
-ifneq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
-LIBGCC_S_PATH=$(realpath $(wildcard $(call qstrip,$(CONFIG_LIBGCC_ROOT_DIR))/$(call qstrip,$(CONFIG_LIBGCC_FILE_SPEC))))
-LIBGCC_S=$(if $(LIBGCC_S_PATH),-L$(dir $(LIBGCC_S_PATH)) -lgcc_s)
-LIBGCC_A=$(realpath $(lastword $(wildcard $(dir $(LIBGCC_S_PATH))/gcc/*/*/libgcc.a)))
-else
-LIBGCC_A=$(lastword $(wildcard $(TOOLCHAIN_DIR)/lib/gcc/*/*/libgcc.a))
-LIBGCC_S=$(if $(wildcard $(TOOLCHAIN_DIR)/lib/libgcc_s.so),-L$(TOOLCHAIN_DIR)/lib -lgcc_s,$(LIBGCC_A))
-endif
-
-ifeq ($(CONFIG_ARCH_64BIT),y)
-  LIB_SUFFIX:=64
-endif
-
-ifndef DUMP
-  ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
-    -include $(TOOLCHAIN_DIR)/info.mk
-    export GCC_HONOUR_COPTS:=0
-    TARGET_CROSS:=$(if $(TARGET_CROSS),$(TARGET_CROSS),$(OPTIMIZE_FOR_CPU)-openwrt-linux$(if $(TARGET_SUFFIX),-$(TARGET_SUFFIX))-)
-    TARGET_CFLAGS+= -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result
-    TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/usr/include
-    ifeq ($(CONFIG_USE_MUSL),y)
-      TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/include/fortify
-    endif
-    TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/include
-    TARGET_LDFLAGS+= -L$(TOOLCHAIN_DIR)/usr/lib -L$(TOOLCHAIN_DIR)/lib
-    TARGET_PATH:=$(TOOLCHAIN_DIR)/bin:$(TARGET_PATH)
-  else
-    ifeq ($(CONFIG_NATIVE_TOOLCHAIN),)
-      TARGET_CROSS:=$(call qstrip,$(CONFIG_TOOLCHAIN_PREFIX))
-      TOOLCHAIN_ROOT_DIR:=$(call qstrip,$(CONFIG_TOOLCHAIN_ROOT))
-      TOOLCHAIN_BIN_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_BIN_PATH)))
-      TOOLCHAIN_INC_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_INC_PATH)))
-      TOOLCHAIN_LIB_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_LIB_PATH)))
-      ifneq ($(TOOLCHAIN_BIN_DIRS),)
-        TARGET_PATH:=$(subst $(space),:,$(TOOLCHAIN_BIN_DIRS)):$(TARGET_PATH)
-      endif
-      ifneq ($(TOOLCHAIN_INC_DIRS),)
-        TARGET_CPPFLAGS+= $(patsubst %,-I%,$(TOOLCHAIN_INC_DIRS))
-      endif
-      ifneq ($(TOOLCHAIN_LIB_DIRS),)
-        TARGET_LDFLAGS+= $(patsubst %,-L%,$(TOOLCHAIN_LIB_DIRS))
-      endif
-      TARGET_PATH:=$(TOOLCHAIN_DIR)/bin:$(TARGET_PATH)
-    endif
-  endif
-endif
-TARGET_PATH_PKG:=$(STAGING_DIR)/host/bin:$(STAGING_DIR_HOSTPKG)/bin:$(TARGET_PATH)
-
-ifeq ($(CONFIG_SOFT_FLOAT),y)
-  SOFT_FLOAT_CONFIG_OPTION:=--with-float=soft
-  ifeq ($(CONFIG_arm),y)
-    TARGET_CFLAGS+= -mfloat-abi=soft
-  else
-    TARGET_CFLAGS+= -msoft-float
-  endif
-else
-  SOFT_FLOAT_CONFIG_OPTION:=
-  ifeq ($(CONFIG_arm),y)
-    TARGET_CFLAGS+= -mfloat-abi=hard
-  endif
-endif
-
-export PATH:=$(TARGET_PATH)
-export STAGING_DIR STAGING_DIR_HOST STAGING_DIR_HOSTPKG
-export SH_FUNC:=. $(INCLUDE_DIR)/shell.sh;
-
-PKG_CONFIG:=$(STAGING_DIR_HOST)/bin/pkg-config
-
-export PKG_CONFIG
-
-HOSTCC:=gcc
-HOSTCXX:=g++
-HOST_CPPFLAGS:=-I$(STAGING_DIR_HOST)/include $(if $(IS_PACKAGE_BUILD),-I$(STAGING_DIR_HOSTPKG)/include -I$(STAGING_DIR)/host/include)
-HOST_CFLAGS:=-O2 $(HOST_CPPFLAGS)
-HOST_LDFLAGS:=-L$(STAGING_DIR_HOST)/lib $(if $(IS_PACKAGE_BUILD),-L$(STAGING_DIR_HOSTPKG)/lib -L$(STAGING_DIR)/host/lib)
-
-ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
-  TARGET_AR:=$(TARGET_CROSS)gcc-ar
-  TARGET_RANLIB:=$(TARGET_CROSS)gcc-ranlib
-  TARGET_NM:=$(TARGET_CROSS)gcc-nm
-else
-  TARGET_AR:=$(TARGET_CROSS)ar
-  TARGET_RANLIB:=$(TARGET_CROSS)ranlib
-  TARGET_NM:=$(TARGET_CROSS)nm
-endif
-
-BUILD_KEY=$(TOPDIR)/key-build
-
-FAKEROOT:=$(STAGING_DIR_HOST)/bin/fakeroot
-
-TARGET_CC:=$(TARGET_CROSS)gcc
-TARGET_CXX:=$(TARGET_CROSS)g++
-KPATCH:=$(SCRIPT_DIR)/patch-kernel.sh
-SED:=$(STAGING_DIR_HOST)/bin/sed -i -e
-ESED:=$(STAGING_DIR_HOST)/bin/sed -E -i -e
-CP:=cp -fpR
-LN:=ln -sf
-XARGS:=xargs -r
-
-BASH:=bash
-TAR:=tar
-FIND:=find
-PATCH:=patch
-PYTHON:=python
-
-INSTALL_BIN:=install -m0755
-INSTALL_SUID:=install -m4755
-INSTALL_DIR:=install -d -m0755
-INSTALL_DATA:=install -m0644
-INSTALL_CONF:=install -m0600
-
-TARGET_CC_NOCACHE:=$(TARGET_CC)
-TARGET_CXX_NOCACHE:=$(TARGET_CXX)
-HOSTCC_NOCACHE:=$(HOSTCC)
-HOSTCXX_NOCACHE:=$(HOSTCXX)
-export TARGET_CC_NOCACHE
-export TARGET_CXX_NOCACHE
-export HOSTCC_NOCACHE
-export HOSTCXX_NOCACHE
-
-ifneq ($(CONFIG_CCACHE),)
-  TARGET_CC:= ccache_cc
-  TARGET_CXX:= ccache_cxx
-  HOSTCC:= ccache $(HOSTCC)
-  HOSTCXX:= ccache $(HOSTCXX)
-  export CCACHE_BASEDIR:=$(TOPDIR)
-  export CCACHE_DIR:=$(if $(call qstrip,$(CONFIG_CCACHE_DIR)),$(call qstrip,$(CONFIG_CCACHE_DIR)),$(TOPDIR)/.ccache)
-  export CCACHE_COMPILERCHECK:=%compiler% -dumpmachine; %compiler% -dumpversion
-endif
-
-TARGET_CONFIGURE_OPTS = \
-  AR="$(TARGET_AR)" \
-  AS="$(TARGET_CC) -c $(TARGET_ASFLAGS)" \
-  LD=$(TARGET_CROSS)ld \
-  NM="$(TARGET_NM)" \
-  CC="$(TARGET_CC)" \
-  GCC="$(TARGET_CC)" \
-  CXX="$(TARGET_CXX)" \
-  RANLIB="$(TARGET_RANLIB)" \
-  STRIP=$(TARGET_CROSS)strip \
-  OBJCOPY=$(TARGET_CROSS)objcopy \
-  OBJDUMP=$(TARGET_CROSS)objdump \
-  SIZE=$(TARGET_CROSS)size
-
-# strip an entire directory
-ifneq ($(CONFIG_NO_STRIP),)
-  RSTRIP:=:
-  STRIP:=:
-else
-  ifneq ($(CONFIG_USE_STRIP),)
-    STRIP:=$(TARGET_CROSS)strip $(call qstrip,$(CONFIG_STRIP_ARGS))
-  else
-    ifneq ($(CONFIG_USE_SSTRIP),)
-      STRIP:=$(STAGING_DIR_HOST)/bin/sstrip $(call qstrip,$(CONFIG_SSTRIP_ARGS))
-    endif
-  endif
-  RSTRIP= \
-    export CROSS="$(TARGET_CROSS)" \
-		$(if $(PKG_BUILD_ID),KEEP_BUILD_ID=1) \
-		$(if $(CONFIG_KERNEL_KALLSYMS),NO_RENAME=1) \
-		$(if $(CONFIG_KERNEL_PROFILING),KEEP_SYMBOLS=1); \
-    NM="$(TARGET_CROSS)nm" \
-    STRIP="$(STRIP)" \
-    STRIP_KMOD="$(SCRIPT_DIR)/strip-kmod.sh" \
-    PATCHELF="$(STAGING_DIR_HOST)/bin/patchelf" \
-    $(SCRIPT_DIR)/rstrip.sh
-endif
-
-ifeq ($(CONFIG_IPV6),y)
-  DISABLE_IPV6:=
-else
-  DISABLE_IPV6:=--disable-ipv6
-endif
-
-TAR_OPTIONS:=-xf -
-
-ifeq ($(CONFIG_BUILD_LOG),y)
-  BUILD_LOG:=1
-endif
-
-export BISON_PKGDATADIR:=$(STAGING_DIR_HOST)/share/bison
-export M4:=$(STAGING_DIR_HOST)/bin/m4
-
-define shvar
-V_$(subst .,_,$(subst -,_,$(subst /,_,$(1))))
-endef
-
-define shexport
-export $(call shvar,$(1))=$$(call $(1))
-endef
-
-# Execute commands under flock
-# $(1) => The shell expression.
-# $(2) => The lock name. If not given, the global lock will be used.
-ifneq ($(wildcard $(STAGING_DIR_HOST)/bin/flock),)
-  define locked
-	SHELL= \
-	flock \
-		$(TMP_DIR)/.$(if $(2),$(strip $(2)),global).flock \
-		-c '$(subst ','\'',$(1))'
-  endef
-else
-  locked=$(1)
-endif
-
-# Recursively copy paths into another directory, purge dangling
-# symlinks before.
-# $(1) => File glob expression
-# $(2) => Destination directory
-define file_copy
-	for src_dir in $(sort $(foreach d,$(wildcard $(1)),$(dir $(d)))); do \
-		( cd $$src_dir; find -type f -or -type d ) | \
-			( cd $(2); while :; do \
-				read FILE; \
-				[ -z "$$FILE" ] && break; \
-				[ -L "$$FILE" ] || continue; \
-				echo "Removing symlink $(2)/$$FILE"; \
-				rm -f "$$FILE"; \
-			done; ); \
-	done; \
-	$(CP) $(1) $(2)
-endef
-
-# Calculate sha256sum of any plain file within a given directory
-# $(1) => Input directory
-# $(2) => If set, recurse into subdirectories
-define sha256sums
-	(cd $(1); find . $(if $(2),,-maxdepth 1) -type f -not -name 'sha256sums' -printf "%P\n" | sort | \
-		xargs -r $(STAGING_DIR_HOST)/bin/mkhash -n sha256 | sed -ne 's!^\(.*\) \(.*\)$$!\1 *\2!p' > sha256sums)
-endef
-
-# file extension
-ext=$(word $(words $(subst ., ,$(1))),$(subst ., ,$(1)))
-
-all:
-FORCE: ;
-.PHONY: FORCE
-
-check: FORCE
-	@true
-
-val.%:
-	@$(if $(filter undefined,$(origin $*)),\
-		echo "$* undefined" >&2, \
-		echo '$(subst ','"'"',$($*))' \
-	)
-
-var.%:
-	@$(if $(filter undefined,$(origin $*)),\
-		echo "$* undefined" >&2, \
-		echo "$*='"'$(subst ','"'\"'\"'"',$($*))'"'" \
-	)
-
-endif #__rules_inc

root/target/linux/bcm27xx/bcm2708/config-4.14

@@ -0,0 +1,431 @@
+# CONFIG_AIO is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_ERRATA_411920=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_ARM_UNWIND=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2835_DEVGPIOMEM is not set
+CONFIG_BCM2835_FAST_MEMCPY=y
+CONFIG_BCM2835_MBOX=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_TIMER=y
+CONFIG_BCM2835_VCHIQ=y
+# CONFIG_BCM2835_VCHIQ_SUPPORT_MEMDUMP is not set
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM_VCIO=y
+CONFIG_BCM_VC_SM=y
+CONFIG_BCM_VIDEOCORE=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BUILD_BIN2C=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPU_32v6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_ABRT_EV6=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_PM=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_V6K=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+# CONFIG_DMA_NOOP_OPS is not set
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+# CONFIG_DMA_VIRT_OPS is not set
+CONFIG_DNOTIFY=y
+# CONFIG_DRM_LIB_RANDOM is not set
+# CONFIG_DRM_PANEL_LVDS is not set
+# CONFIG_DRM_PANEL_INNOLUX_P079ZCA is not set
+# CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2 is not set
+# CONFIG_DRM_PANEL_SITRONIX_ST7789V is not set
+# CONFIG_DRM_VC4_HDMI_CEC is not set
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXPORTFS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIQ=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FUTEX_PI=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+# CONFIG_GPIO_BCM_EXP is not set
+# CONFIG_GPIO_BCM_VIRT is not set
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+# CONFIG_HAVE_ARCH_BITREVERSE is not set
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HZ_FIXED=0
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOMMU_HELPER=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_MDIO_BUS is not set
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_RPISENSE_CORE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_PER_CPU_KM=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_OABI_COMPAT=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+# CONFIG_RCU_NEED_SEGCBLIST is not set
+# CONFIG_RCU_STALL_COMMON is not set
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+# CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD is not set
+# CONFIG_SND_BCM2708_SOC_RPI_CIRRUS is not set
+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=m
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=m
+CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=m
+# CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC is not set
+# CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD is not set
+CONFIG_SND_SOC_ICS43432=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THIN_ARCHIVES=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TINY_SRCU=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_UID16 is not set
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_LAN78XX=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0

root/target/linux/bcm27xx/bcm2709/config-4.14

@@ -0,0 +1,472 @@
+# CONFIG_AIO is not set
+CONFIG_ALIGNMENT_TRAP=y
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MMAP_RND_BITS_MAX=15
+CONFIG_ARCH_MULTIPLATFORM=y
+# CONFIG_ARCH_MULTI_CPU_AUTO is not set
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2835_DEVGPIOMEM is not set
+CONFIG_BCM2835_MBOX=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_TIMER=y
+CONFIG_BCM2835_VCHIQ=y
+# CONFIG_BCM2835_VCHIQ_SUPPORT_MEMDUMP is not set
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM_VCIO=y
+CONFIG_BCM_VC_SM=y
+CONFIG_BCM_VIDEOCORE=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BUILD_BIN2C=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_UART_8250 is not set
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+# CONFIG_DMA_NOOP_OPS is not set
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+# CONFIG_DMA_VIRT_OPS is not set
+CONFIG_DNOTIFY=y
+# CONFIG_DRM_LIB_RANDOM is not set
+CONFIG_DRM_PANEL_LVDS=n
+CONFIG_DRM_PANEL_INNOLUX_P079ZCA=n
+CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=n
+CONFIG_DRM_PANEL_SITRONIX_ST7789V=n
+CONFIG_DRM_VC4_HDMI_CEC=n
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXPORTFS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIQ=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FUTEX_PI=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_ARIZONA=y
+CONFIG_GPIO_BCM_EXP=y
+CONFIG_GPIO_BCM_VIRT=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HAVE_ARM_SMCCC=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_HW_CONSOLE=y
+CONFIG_HZ_FIXED=0
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOMMU_HELPER=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+# CONFIG_MDIO_BUS is not set
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_ARIZONA=y
+CONFIG_MFD_SYSCON=y
+# CONFIG_MFD_RPISENSE_CORE is not set
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MTD is not set
+CONFIG_MULTI_IRQ_HANDLER=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_OABI_COMPAT=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0x80000000
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD=n
+CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=n
+CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=n
+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=n
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=n
+CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=n
+CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=n
+# CONFIG_SND_SOC_ICS43432 is not set
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+# CONFIG_TEE is not set
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THIN_ARCHIVES=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_UID16 is not set
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_LAN78XX=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+CONFIG_USE_OF=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_VMSPLIT_2G=y
+# CONFIG_VMSPLIT_3G is not set
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0

root/target/linux/bcm27xx/bcm2709/config-4.19

@@ -0,0 +1,568 @@
+# CONFIG_AIO is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_AXXIA is not set
+CONFIG_ARCH_BCM=y
+CONFIG_ARCH_BCM2835=y
+# CONFIG_ARCH_BCM_HR2 is not set
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
+CONFIG_ARCH_HAS_PHYS_TO_DMA=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_BUILTIN_BSWAP=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
+CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
+CONFIG_ARGON_MEM=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_CPU_SUSPEND=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_ERRATA_643719=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_MODULE_PLTS=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_AX88796B_PHY is not set
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+CONFIG_BCM2835_DEVGPIOMEM=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_BCM2835_POWER=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_TIMER=y
+CONFIG_BCM2835_VCHIQ=y
+CONFIG_BCM2835_VCHIQ_MMAL=y
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM7XXX_PHY=y
+CONFIG_BCMGENET=y
+CONFIG_BCM_NET_PHYLIB=y
+CONFIG_BCM_VCIO=y
+CONFIG_BCM_VC_SM=y
+CONFIG_BCM_VC_SM_CMA=y
+CONFIG_BCM_VIDEOCORE=y
+CONFIG_BLK_DEBUG_FS=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_DM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BOUNCE=y
+CONFIG_BRCMSTB_THERMAL=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CC_HAS_ASM_GOTO=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=5
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPUFREQ_DT is not set
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_AES_ARM_CE=y
+CONFIG_CRYPTO_CHACHA20=y
+CONFIG_CRYPTO_CHACHA20_NEON=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32_ARM_CE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_GHASH_ARM_CE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM=y
+CONFIG_CRYPTO_SHA1_ARM_CE=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA2_ARM_CE=y
+CONFIG_CRYPTO_SHA512_ARM=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_ALIGN_RODATA=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_MPTCP_PM="fullmesh"
+CONFIG_DEVMEM=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIQ=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_FPE_NWFPE is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FREEZER=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_BCM_VIRT=y
+CONFIG_GPIO_RASPBERRYPI_EXP=y
+CONFIG_GPIO_STMPE=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARM_ARCH_TIMER=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_OPTPROBES=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SMP=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
+CONFIG_HW_RANDOM_IPROC_RNG200=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+# CONFIG_I2C_BCM2708 is not set
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_XZ is not set
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MD=y
+CONFIG_MDIO_BCM_UNIMAC=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_RPISENSE_CORE is not set
+CONFIG_MFD_STMPE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICROCHIP_PHY=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGHT_HAVE_PCI=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_IPROC=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_OABI_COMPAT=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_BRCMSTB=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+# CONFIG_PCI_V3_SEMI is not set
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+# CONFIG_PL310_ERRATA_588369 is not set
+# CONFIG_PL310_ERRATA_727915 is not set
+# CONFIG_PL310_ERRATA_753970 is not set
+# CONFIG_PL310_ERRATA_769419 is not set
+CONFIG_PLUGIN_HOSTCC="g++"
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+# CONFIG_PWM_STMPE is not set
+CONFIG_PWM_SYSFS=y
+CONFIG_RAS=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+# CONFIG_RPIVID_MEM is not set
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCSI=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+CONFIG_SCSI_MQ_DEFAULT=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_BCM2835AUX is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_SLAVE=y
+# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
+# CONFIG_SPI_SLAVE_TIME is not set
+CONFIG_SRCU=y
+CONFIG_STMPE_I2C=y
+CONFIG_STMPE_SPI=y
+CONFIG_STREAM_PARSER=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_TTY_PRINTK=y
+CONFIG_UEVENT_HELPER_PATH=""
+# CONFIG_UID16 is not set
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB=y
+CONFIG_USB_PCI=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_LAN78XX=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USE_OF=y
+CONFIG_VDSO=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_ZBOOT_ROM_TEXT=0

root/target/linux/bcm27xx/bcm2710/config-4.14

@@ -0,0 +1,492 @@
+CONFIG_64BIT=y
+# CONFIG_AIO is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
+# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
+CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+# CONFIG_ARCH_WANTS_THP_SWAP is not set
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARM64=y
+# CONFIG_ARM64_16K_PAGES is not set
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_64K_PAGES is not set
+CONFIG_ARM64_CONT_SHIFT=4
+# CONFIG_ARM64_CRYPTO is not set
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_ERRATUM_1024718=y
+CONFIG_ARM64_HW_AFDBM=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_MODULE_CMODEL_LARGE=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+# CONFIG_ARM64_PMEM is not set
+# CONFIG_ARM64_PTDUMP_CORE is not set
+# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+# CONFIG_ARM64_SW_TTBR0_PAN is not set
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+# CONFIG_ARM64_VA_BITS_48 is not set
+CONFIG_ARM64_VHE=y
+CONFIG_ARM64_SSBD=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_TIMER_SP804=y
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2835_DEVGPIOMEM is not set
+CONFIG_BCM2835_MBOX=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_VCHIQ=y
+# CONFIG_BCM2835_VCHIQ_SUPPORT_MEMDUMP is not set
+CONFIG_BCM2835_WDT=y
+# CONFIG_BCM_FLEXRM_MBOX is not set
+# CONFIG_BCM_VCIO is not set
+# CONFIG_BCM_VC_SM is not set
+CONFIG_BCM_VIDEOCORE=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BOUNCE=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+# CONFIG_COMMON_CLK_VERSATILE is not set
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMPAT is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPUFREQ_DT is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_FREQ=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEFAULT_DUMMY=y
+CONFIG_DEFAULT_SCHEDULER=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_ENGINE=y
+# CONFIG_DMA_NOOP_OPS is not set
+CONFIG_DMA_OF=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+# CONFIG_DMA_VIRT_OPS is not set
+CONFIG_DNOTIFY=y
+# CONFIG_DRM_LIB_RANDOM is not set
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXPORTFS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_PROVIDE_GET_FB_UNMAPPED_AREA is not set
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FREEZER=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_FUTEX_PI=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IO=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_BCM_EXP=y
+CONFIG_GPIO_BCM_VIRT=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_GRO_CELLS is not set
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_HAVE_ARM_SMCCC=y
+# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
+CONFIG_HAVE_CC_STACKPROTECTOR=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOMMU_HELPER=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICROCHIP_PHY=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MTD is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_IOPORT_MAP=y
+CONFIG_NR_CPUS=4
+# CONFIG_NUMA is not set
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_PADATA=y
+CONFIG_PARTITION_PERCPU=y
+# CONFIG_PCI_DOMAINS is not set
+# CONFIG_PCI_DOMAINS_GENERIC is not set
+# CONFIG_PCI_SYSCALL is not set
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+# CONFIG_PHY_XGENE is not set
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
+# CONFIG_RANDOMIZE_BASE is not set
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+# CONFIG_SCHED_INFO is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THIN_ARCHIVES=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+CONFIG_USB_LAN78XX=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+CONFIG_VMAP_STACK=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_MFD_RPISENSE_CORE=n
+CONFIG_DRM_PANEL_LVDS=n
+CONFIG_DRM_PANEL_INNOLUX_P079ZCA=n
+CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2=n
+CONFIG_DRM_PANEL_SITRONIX_ST7789V=n
+CONFIG_DRM_VC4_HDMI_CEC=n
+CONFIG_SND_BCM2708_SOC_GOOGLEVOICEHAT_SOUNDCARD=n
+CONFIG_SND_BCM2708_SOC_RPI_CIRRUS=n
+CONFIG_SND_AUDIOINJECTOR_OCTO_SOUNDCARD=n
+CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC_PLUS=n
+CONFIG_SND_BCM2708_SOC_ALLO_BOSS_DAC=n
+CONFIG_SND_BCM2708_SOC_ALLO_DIGIONE=n
+CONFIG_SND_BCM2708_SOC_ALLO_KATANA_DAC=n
+CONFIG_SND_SOC_ICS43432=n

root/target/linux/bcm27xx/bcm2710/config-4.19

@@ -0,0 +1,545 @@
+CONFIG_64BIT=y
+# CONFIG_AIO is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_INLINE_READ_LOCK=y
+CONFIG_ARCH_INLINE_READ_LOCK_BH=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_READ_UNLOCK=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_SPIN_LOCK=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_WRITE_LOCK=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_INT128=y
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARM64=y
+# CONFIG_ARM64_16K_PAGES is not set
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_64K_PAGES is not set
+CONFIG_ARM64_CONT_SHIFT=4
+# CONFIG_ARM64_CRYPTO is not set
+CONFIG_ARM64_ERRATUM_1024718=y
+CONFIG_ARM64_ERRATUM_1463225=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_HW_AFDBM=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_MODULE_PLTS=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+# CONFIG_ARM64_PMEM is not set
+# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+CONFIG_ARM64_SSBD=y
+CONFIG_ARM64_SVE=y
+# CONFIG_ARM64_SW_TTBR0_PAN is not set
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+# CONFIG_ARM64_VA_BITS_48 is not set
+CONFIG_ARM64_VHE=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_PSCI_FW=y
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_AX88796B_PHY is not set
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+# CONFIG_BCM2835_DEVGPIOMEM is not set
+CONFIG_BCM2835_MBOX=y
+CONFIG_BCM2835_POWER=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_VCHIQ=y
+CONFIG_BCM2835_VCHIQ_MMAL=y
+CONFIG_BCM2835_WDT=y
+# CONFIG_BCM_VCIO is not set
+# CONFIG_BCM_VC_SM is not set
+CONFIG_BCM_VIDEOCORE=y
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BRCMSTB_THERMAL=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=16
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_XGENE=y
+# CONFIG_COMPAT is not set
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CPUFREQ_DT is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEFAULT_MPTCP_PM="fullmesh"
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=m
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+# CONFIG_F2FS_CHECK_FS is not set
+CONFIG_F2FS_FS=y
+# CONFIG_F2FS_FS_SECURITY is not set
+CONFIG_F2FS_FS_XATTR=y
+CONFIG_F2FS_STAT_FS=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FREEZER=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_BCM_VIRT=y
+CONFIG_GPIO_RASPBERRYPI_EXP=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_INLINE_READ_LOCK=y
+CONFIG_INLINE_READ_LOCK_BH=y
+CONFIG_INLINE_READ_LOCK_IRQ=y
+CONFIG_INLINE_READ_LOCK_IRQSAVE=y
+CONFIG_INLINE_READ_UNLOCK_BH=y
+CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
+CONFIG_INLINE_SPIN_LOCK=y
+CONFIG_INLINE_SPIN_LOCK_BH=y
+CONFIG_INLINE_SPIN_LOCK_IRQ=y
+CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
+CONFIG_INLINE_SPIN_TRYLOCK=y
+CONFIG_INLINE_SPIN_TRYLOCK_BH=y
+CONFIG_INLINE_SPIN_UNLOCK_BH=y
+CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
+CONFIG_INLINE_WRITE_LOCK=y
+CONFIG_INLINE_WRITE_LOCK_BH=y
+CONFIG_INLINE_WRITE_LOCK_IRQ=y
+CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
+CONFIG_INLINE_WRITE_UNLOCK_BH=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+# CONFIG_MFD_RPISENSE_CORE is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MICROCHIP_PHY=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_RELA=y
+# CONFIG_MTD is not set
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NO_IOPORT_MAP=y
+CONFIG_NR_CPUS=4
+# CONFIG_NUMA is not set
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_PADATA=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PLUGIN_HOSTCC="g++"
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+CONFIG_PWM_SYSFS=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+# CONFIG_RANDOMIZE_BASE is not set
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RFS_ACCEL=y
+# CONFIG_RPIVID_MEM is not set
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCSI=y
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_PROC_FS is not set
+# CONFIG_SENSORS_RASPBERRYPI_HWMON is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+# CONFIG_SND_AUDIOSENSE_PI is not set
+# CONFIG_SND_BCM2708_SOC_HIFIBERRY_DACPLUSADC is not set
+# CONFIG_SND_BCM2708_SOC_I_SABRE_Q2M is not set
+# CONFIG_SND_RPI_SIMPLE_SOUNDCARD is not set
+# CONFIG_SND_RPI_WM8804_SOUNDCARD is not set
+# CONFIG_SND_SOC_AD193X_SPI is not set
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SRCU=y
+CONFIG_STREAM_PARSER=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_TOUCHSCREEN_RPI_FT5406 is not set
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_LAN78XX=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+# CONFIG_VIDEO_CODEC_BCM2835 is not set
+CONFIG_VMAP_STACK=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZONE_DMA32=y

root/target/linux/bcm27xx/bcm2711/config-4.19

@@ -0,0 +1,667 @@
+CONFIG_64BIT=y
+# CONFIG_AIO is not set
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
+CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
+CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
+CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
+CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
+CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
+CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
+CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
+CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
+CONFIG_ARCH_HAS_KCOV=y
+CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
+CONFIG_ARCH_HAS_PHYS_TO_DMA=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
+CONFIG_ARCH_HAS_SET_MEMORY=y
+CONFIG_ARCH_HAS_SG_CHAIN=y
+CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
+CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
+CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y
+CONFIG_ARCH_HAS_TICK_BROADCAST=y
+CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_INLINE_READ_LOCK=y
+CONFIG_ARCH_INLINE_READ_LOCK_BH=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_READ_UNLOCK=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_SPIN_LOCK=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y
+CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_INLINE_WRITE_LOCK=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y
+CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y
+CONFIG_ARCH_MMAP_RND_BITS=18
+CONFIG_ARCH_MMAP_RND_BITS_MAX=24
+CONFIG_ARCH_MMAP_RND_BITS_MIN=18
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS=11
+CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
+CONFIG_ARCH_PROC_KCORE_TEXT=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
+CONFIG_ARCH_SUPPORTS_INT128=y
+CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
+CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
+CONFIG_ARCH_SUPPORTS_UPROBES=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
+CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
+CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
+CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
+CONFIG_ARCH_WANT_FRAME_POINTERS=y
+CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
+CONFIG_ARGON_MEM=y
+CONFIG_ARM64=y
+# CONFIG_ARM64_16K_PAGES is not set
+CONFIG_ARM64_4K_PAGES=y
+# CONFIG_ARM64_64K_PAGES is not set
+CONFIG_ARM64_CONT_SHIFT=4
+CONFIG_ARM64_CRYPTO=y
+CONFIG_ARM64_ERRATUM_1024718=y
+CONFIG_ARM64_ERRATUM_1463225=y
+CONFIG_ARM64_ERRATUM_819472=y
+CONFIG_ARM64_ERRATUM_824069=y
+CONFIG_ARM64_ERRATUM_826319=y
+CONFIG_ARM64_ERRATUM_827319=y
+CONFIG_ARM64_ERRATUM_832075=y
+CONFIG_ARM64_ERRATUM_843419=y
+CONFIG_ARM64_HW_AFDBM=y
+# CONFIG_ARM64_LSE_ATOMICS is not set
+CONFIG_ARM64_MODULE_PLTS=y
+CONFIG_ARM64_PAGE_SHIFT=12
+CONFIG_ARM64_PAN=y
+CONFIG_ARM64_PA_BITS=48
+CONFIG_ARM64_PA_BITS_48=y
+# CONFIG_ARM64_PMEM is not set
+# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
+# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
+CONFIG_ARM64_SSBD=y
+CONFIG_ARM64_SVE=y
+# CONFIG_ARM64_SW_TTBR0_PAN is not set
+CONFIG_ARM64_UAO=y
+CONFIG_ARM64_VA_BITS=39
+CONFIG_ARM64_VA_BITS_39=y
+# CONFIG_ARM64_VA_BITS_48 is not set
+CONFIG_ARM64_VHE=y
+CONFIG_ARMV8_DEPRECATED=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND=y
+CONFIG_ARM_BCM2835_CPUFREQ=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_GIC_V2M=y
+CONFIG_ARM_GIC_V3=y
+CONFIG_ARM_GIC_V3_ITS=y
+CONFIG_ARM_GIC_V3_ITS_PCI=y
+CONFIG_ARM_HEAVY_MB=y
+CONFIG_ARM_LPAE=y
+CONFIG_ARM_PSCI_FW=y
+CONFIG_ARM_MODULE_PLTS=y
+# CONFIG_ARM_SCMI_PROTOCOL is not set
+# CONFIG_ARM_SP805_WATCHDOG is not set
+CONFIG_ARM_TIMER_SP804=y
+# CONFIG_AX88796B_PHY is not set
+CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
+# CONFIG_BACKLIGHT_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BCM2708_VCMEM=y
+CONFIG_BCM2835_DEVGPIOMEM=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_BCM2835_POWER=y
+# CONFIG_BCM2835_SMI is not set
+CONFIG_BCM2835_THERMAL=y
+CONFIG_BCM2835_VCHIQ=y
+CONFIG_BCM2835_VCHIQ_MMAL=y
+CONFIG_BCM2835_WDT=y
+CONFIG_BCM7XXX_PHY=y
+CONFIG_BCMGENET=y
+CONFIG_BCM_NET_PHYLIB=y
+CONFIG_BCM_VCIO=y
+# CONFIG_BCM_VC_SM is not set
+CONFIG_BCM_VC_SM_CMA=y
+CONFIG_BCM_VIDEOCORE=y
+CONFIG_BLK_DEBUG_FS=y
+CONFIG_BLK_DEV_BSG=y
+CONFIG_BLK_DEV_BSGLIB=y
+# CONFIG_BLK_DEV_DM is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_MD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=4096
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BLK_SCSI_REQUEST=y
+CONFIG_BLOCK_COMPAT=y
+CONFIG_BOUNCE=y
+CONFIG_BRCMSTB_THERMAL=y
+CONFIG_BRCM_CHAR_DRIVERS=y
+CONFIG_BROADCOM_PHY=y
+CONFIG_BUILD_BIN2C=y
+CONFIG_CACHE_L2X0=y
+CONFIG_CAVIUM_ERRATUM_22375=y
+CONFIG_CAVIUM_ERRATUM_23154=y
+CONFIG_CAVIUM_ERRATUM_27456=y
+CONFIG_CC_HAS_ASM_GOTO=y
+CONFIG_CLKDEV_LOOKUP=y
+CONFIG_CLKSRC_MMIO=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMA=y
+CONFIG_CMA_ALIGNMENT=8
+CONFIG_CMA_AREAS=7
+# CONFIG_CMA_DEBUG is not set
+# CONFIG_CMA_DEBUGFS is not set
+CONFIG_CMA_SIZE_MBYTES=5
+# CONFIG_CMA_SIZE_SEL_MAX is not set
+CONFIG_CMA_SIZE_SEL_MBYTES=y
+# CONFIG_CMA_SIZE_SEL_MIN is not set
+# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_XGENE=y
+CONFIG_COMPAT=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_COMPAT_BINFMT_ELF=y
+CONFIG_COMPAT_NETLINK_MESSAGES=y
+CONFIG_COMPAT_OLD_SIGACTION=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_CP15_BARRIER_EMULATION=y
+# CONFIG_CPUFREQ_DT is not set
+# CONFIG_CPU_BIG_ENDIAN is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+# CONFIG_CPU_THERMAL is not set
+CONFIG_CRC16=y
+CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AES_ARM64=y
+CONFIG_CRYPTO_AES_ARM64_BS=y
+CONFIG_CRYPTO_AES_ARM64_CE=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=y
+CONFIG_CRYPTO_CHACHA20=y
+CONFIG_CRYPTO_CHACHA20_NEON=y
+CONFIG_CRYPTO_CRC32=y
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_CRC32_ARM64_CE=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_NULL2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA256_ARM64=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_SHA3=y
+CONFIG_CRYPTO_SHA3_ARM64=y
+CONFIG_CRYPTO_SHA512_ARM64=y
+CONFIG_CRYPTO_SHA512_ARM64_CE=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_SM3=y
+CONFIG_CRYPTO_SM3_ARM64_CE=y
+CONFIG_CRYPTO_SM4=y
+CONFIG_CRYPTO_SM4_ARM64_CE=y
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_MPTCP_PM="fullmesh"
+CONFIG_DEVMEM=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2708=y
+CONFIG_DMA_BCM2835=y
+CONFIG_DMA_CMA=y
+CONFIG_DMA_DIRECT_OPS=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DNOTIFY=y
+CONFIG_DTC=y
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FB=y
+CONFIG_FB_BCM2708=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+CONFIG_FB_CMDLINE=y
+# CONFIG_FB_RPISENSE is not set
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x16=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+CONFIG_FRAME_POINTER=y
+CONFIG_FREEZER=y
+CONFIG_FIXED_PHY=y
+CONFIG_FSL_ERRATUM_A008585=y
+CONFIG_FS_IOMAP=y
+CONFIG_FS_MBCACHE=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_ARCH_TOPOLOGY=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CSUM=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MIGRATION=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_BCM_VIRT=y
+CONFIG_GPIO_RASPBERRYPI_EXP=y
+CONFIG_GPIO_STMPE=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
+CONFIG_HAVE_ARCH_AUDITSYSCALL=y
+CONFIG_HAVE_ARCH_BITREVERSE=y
+CONFIG_HAVE_ARCH_HUGE_VMAP=y
+CONFIG_HAVE_ARCH_JUMP_LABEL=y
+CONFIG_HAVE_ARCH_KASAN=y
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
+CONFIG_HAVE_ARCH_PFN_VALID=y
+CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
+CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
+CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
+CONFIG_HAVE_ARCH_VMAP_STACK=y
+CONFIG_HAVE_ARM_SMCCC=y
+CONFIG_HAVE_CLK=y
+CONFIG_HAVE_CLK_PREPARE=y
+CONFIG_HAVE_CMPXCHG_DOUBLE=y
+CONFIG_HAVE_CMPXCHG_LOCAL=y
+CONFIG_HAVE_CONTEXT_TRACKING=y
+CONFIG_HAVE_C_RECORDMCOUNT=y
+CONFIG_HAVE_DEBUG_BUGVERBOSE=y
+CONFIG_HAVE_DEBUG_KMEMLEAK=y
+CONFIG_HAVE_DMA_CONTIGUOUS=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_EBPF_JIT=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_GUP=y
+CONFIG_HAVE_IDE=y
+CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
+CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
+CONFIG_HAVE_MEMBLOCK=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
+CONFIG_HAVE_NET_DSA=y
+CONFIG_HAVE_PATA_PLATFORM=y
+CONFIG_HAVE_PERF_EVENTS=y
+CONFIG_HAVE_PERF_REGS=y
+CONFIG_HAVE_PERF_USER_STACK_DUMP=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
+CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
+CONFIG_HAVE_RSEQ=y
+CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
+CONFIG_HAVE_UID16=y
+CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_BCM2835=y
+CONFIG_HW_RANDOM_IPROC_RNG200=y
+CONFIG_HOLES_IN_ZONE=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_HUGETLBFS is not set
+CONFIG_HW_CONSOLE=y
+CONFIG_I2C=y
+# CONFIG_I2C_BCM2708 is not set
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_HELPER_AUTO=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
+CONFIG_INLINE_READ_LOCK=y
+CONFIG_INLINE_READ_LOCK_BH=y
+CONFIG_INLINE_READ_LOCK_IRQ=y
+CONFIG_INLINE_READ_LOCK_IRQSAVE=y
+CONFIG_INLINE_READ_UNLOCK_BH=y
+CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y
+CONFIG_INLINE_SPIN_LOCK=y
+CONFIG_INLINE_SPIN_LOCK_BH=y
+CONFIG_INLINE_SPIN_LOCK_IRQ=y
+CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y
+CONFIG_INLINE_SPIN_TRYLOCK=y
+CONFIG_INLINE_SPIN_TRYLOCK_BH=y
+CONFIG_INLINE_SPIN_UNLOCK_BH=y
+CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y
+CONFIG_INLINE_WRITE_LOCK=y
+CONFIG_INLINE_WRITE_LOCK_BH=y
+CONFIG_INLINE_WRITE_LOCK_IRQ=y
+CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y
+CONFIG_INLINE_WRITE_UNLOCK_BH=y
+CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y
+CONFIG_INPUT=y
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_IOSCHED_CFQ=y
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_JBD2=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGER_INPUT=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_CLUT224=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_MAC_PARTITION=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_MAILBOX=y
+# CONFIG_MAILBOX_TEST is not set
+CONFIG_MAX_RAW_DEVS=256
+CONFIG_MD=y
+CONFIG_MDIO_BCM_UNIMAC=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MEMFD_CREATE=y
+CONFIG_MEMORY_ISOLATION=y
+CONFIG_MFD_CORE=y
+# CONFIG_MFD_RPISENSE_CORE is not set
+CONFIG_MFD_STMPE=y
+CONFIG_MFD_SYSCON=y
+CONFIG_MICROCHIP_PHY=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+# CONFIG_MMC_BCM2835 is not set
+CONFIG_MMC_BCM2835_DMA=y
+CONFIG_MMC_BCM2835_MMC=y
+CONFIG_MMC_BCM2835_PIO_DMA_BARRIER=2
+CONFIG_MMC_BCM2835_SDHOST=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_IPROC=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+# CONFIG_MMC_TIFM_SD is not set
+CONFIG_MODULES_USE_ELF_RELA=y
+CONFIG_MTD_BLOCK2MTD=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+# CONFIG_MTD_UBI_BLOCK is not set
+# CONFIG_MTD_UBI_FASTMAP is not set
+# CONFIG_MTD_UBI_GLUEBI is not set
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEED_SG_DMA_LENGTH=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NLS=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NO_BOOTMEM=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+# CONFIG_NUMA is not set
+CONFIG_NVMEM=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_CONFIGFS=y
+CONFIG_OF_DYNAMIC=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OF_NET=y
+CONFIG_OF_OVERLAY=y
+CONFIG_OF_RESERVED_MEM=y
+CONFIG_OF_RESOLVE=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_PADATA=y
+CONFIG_PARTITION_PERCPU=y
+CONFIG_OUTER_CACHE=y
+CONFIG_OUTER_CACHE_SYNC=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_BRCMSTB=y
+CONFIG_PCIE_PME=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PHYLIB=y
+CONFIG_PHYS_ADDR_T_64BIT=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_BCM2835=y
+CONFIG_PLUGIN_HOSTCC="g++"
+CONFIG_PM=y
+CONFIG_PM_CLK=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_GENERIC_DOMAINS=y
+CONFIG_PM_GENERIC_DOMAINS_OF=y
+CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
+CONFIG_PM_SLEEP=y
+CONFIG_PM_SLEEP_SMP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=y
+# CONFIG_PWM_STMPE is not set
+CONFIG_PWM_SYSFS=y
+CONFIG_QUEUED_RWLOCKS=y
+CONFIG_QUEUED_SPINLOCKS=y
+# CONFIG_RANDOMIZE_BASE is not set
+CONFIG_RAS=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_RATIONAL=y
+CONFIG_RAW_DRIVER=y
+CONFIG_RCU_NEED_SEGCBLIST=y
+CONFIG_RCU_STALL_COMMON=y
+CONFIG_REFCOUNT_FULL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_RESET_CONTROLLER=y
+CONFIG_RFS_ACCEL=y
+# CONFIG_RPIVID_MEM is not set
+CONFIG_RPS=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_SCSI=y
+CONFIG_SCSI_ISCSI_ATTRS=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_SCSI_MQ_DEFAULT=y
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_SERIAL_8250_BCM2835AUX=y
+# CONFIG_SERIAL_8250_DMA is not set
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=0
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+# CONFIG_SERIAL_DEV_CTRL_TTYPORT is not set
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SETEND_EMULATION=y
+CONFIG_SG_POOL=y
+CONFIG_SMP=y
+CONFIG_SPARSEMEM=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM_VMEMMAP=y
+CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+# CONFIG_SPI_BCM2835AUX is not set
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_SLAVE=y
+# CONFIG_SPI_SLAVE_SYSTEM_CONTROL is not set
+# CONFIG_SPI_SLAVE_TIME is not set
+CONFIG_SRCU=y
+CONFIG_STMPE_I2C=y
+CONFIG_STMPE_SPI=y
+CONFIG_STREAM_PARSER=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_SWIOTLB=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATION=y
+CONFIG_SYSCTL_EXCEPTION_TRACE=y
+CONFIG_SYSVIPC_COMPAT=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
+# CONFIG_TEXTSEARCH is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_THREAD_INFO_IN_TASK=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TI_ST=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_UBIFS_FS is not set
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNMAP_KERNEL_AT_EL0=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_DWCOTG=y
+# CONFIG_USB_EHCI_HCD is not set
+CONFIG_USB_LAN78XX=y
+CONFIG_USB_NET_DRIVERS=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_PCI=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_UAS=y
+CONFIG_USB_USBNET=y
+# CONFIG_USB_UHCI_HCD is not set
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PCI=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_VMAP_STACK=y
+CONFIG_VDSO=y
+CONFIG_VT=y
+CONFIG_VT_CONSOLE=y
+CONFIG_VT_CONSOLE_SLEEP=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZONE_DMA32=y

root/target/linux/ipq40xx/base-files/etc/board.d/01_leds

@@ -0,0 +1,81 @@
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+alfa-network,ap120c-ac)
+	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
+	;;
+asus,rt-ac58u)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
+	;;
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
+	;;
+avm,fritzbox-7530 |\
+glinet,gl-b1300)
+	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
+	;;
+edgecore,oap100)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
+	;;
+engenius,eap1300)
+	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
+	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
+	;;
+engenius,eap2200)
+	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
+	;;
+engenius,ens620ext)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
+	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
+	;;
+mobipromo,cm520-79f)
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
+	ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
+	;;
+pangu,l1000)
+	ucidef_set_led_default "power" "POWER" "blue:power" "1"
+    ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_netdev "4g1" "4g1" "blue:4g1" "4g1"
+	ucidef_set_led_netdev "4g2" "4g2" "blue:4g2" "4g2"
+	ucidef_set_led_netdev "4g3" "4g3" "blue:4g3" "4g3"
+    ;;
+netgear,ex6100v2 |\
+netgear,ex6150v2)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
+	;;
+qxwlan,e2600ac-c1 |\
+qxwlan,e2600ac-c2)
+	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
+	;;
+zyxel,nbg6617 |\
+zyxel,wre6606)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
+	;;
+esac
+
+board_config_flush
+
+exit 0

root/target/linux/ipq40xx/base-files/etc/board.d/02_network

@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
 # Copyright (c) 2011-2015 OpenWrt.org
@@ -16,7 +15,10 @@ ipq40xx_setup_interfaces()
 	8dev,jalapeno|\
 	alfa-network,ap120c-ac|\
 	engenius,emr3500|\
-	engenius,ens620ext)
+	engenius,ens620ext|\
+	luma,wrtq-329acn|\
+	plasmacloud,pa1200|\
+	plasmacloud,pa2200)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
 	aruba,ap-303|\
@@ -38,13 +40,13 @@ ipq40xx_setup_interfaces()
 		;;
 	asus,map-ac2200|\
 	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	edgecore,oap100|\
 	openmesh,a42|\
 	openmesh,a62)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	asus,rt-ac58u|\
-	p2w,r619ac-128m|\
-	p2w,r619ac|\
 	zyxel,nbg6617)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
@@ -52,7 +54,9 @@ ipq40xx_setup_interfaces()
 		;;
 	avm,fritzbox-4040|\
 	linksys,ea6350v3|\
-	linksys,ea8300)
+    pangu,l1000|\
+	linksys,ea8300|\
+	linksys,mr8300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
@@ -61,7 +65,10 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
 		;;
-	avm,fritzrepeater-3000|\
+	avm,fritzrepeater-3000)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "4:lan:1" "5:lan:2"
+		;;
 	compex,wpj419|\
 	compex,wpj428|\
 	engenius,eap2200)
@@ -77,11 +84,15 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan"
 		;;
+	devolo,magic-2-wifi-next)
+		ucidef_set_interface_lan "eth0 eth1 eth2"
+		;;
 	ezviz,cs-w3-wd1200g-eup)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
 		;;
+	glinet,gl-ap1300 |\
 	glinet,gl-b1300 |\
 	glinet,gl-s1300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -121,9 +132,7 @@ ipq40xx_setup_macs()
 	8dev,habanero-dvk)
 		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 		;;
-	asus,rt-ac58u|\
+	asus,rt-ac58u)
-	p2w,r619ac-128m|\
-	p2w,r619ac)
 		CI_UBIPART=UBI_DEV
 		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
 		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
@@ -132,6 +141,10 @@ ipq40xx_setup_macs()
 	cilab,meshpoint-one)
 		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
 		;;
+	devolo,magic-2-wifi-next)
+		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+		label_mac=$lan_mac
+		;;
 	dlink,dap-2610)
 		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
 		label_mac=$lan_mac
@@ -170,4 +183,4 @@ ipq40xx_setup_interfaces $board
 ipq40xx_setup_macs $board
 board_config_flush
 
-exit 0
+exit 0

root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches

@@ -0,0 +1,24 @@
+. /lib/functions/uci-defaults.sh
+
+board_config_update
+
+board=$(board_name)
+
+case "$board" in
+cellc,rtl30vw)
+	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
+	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
+	ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
+	ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
+	;;
+cilab,meshpoint-one)
+	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
+	;;
+compex,wpj428)
+	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
+	;;
+esac
+
+board_config_flush
+
+exit 0

root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -36,10 +36,12 @@ case "$FIRMWARE" in
 		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
 		;;
 	engenius,eap2200 |\
-	openmesh,a62)
+	openmesh,a62 |\
+	plasmacloud,pa2200)
 		caldata_extract "0:ART" 0x9000 0x2f20
 		;;
-	linksys,ea8300)
+	linksys,ea8300 |\
+	linksys,mr8300)
 		caldata_extract "ART" 0x9000 0x2f20
 		# OEM assigns 4 sequential MACs
 		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
@@ -53,12 +55,11 @@ case "$FIRMWARE" in
 	alfa-network,ap120c-ac |\
 	cilab,meshpoint-one |\
 	ezviz,cs-w3-wd1200g-eup |\
+	glinet,gl-ap1300 |\
 	glinet,gl-b1300 |\
 	glinet,gl-s1300 |\
 	linksys,ea6350v3 |\
 	mobipromo,cm520-79f |\
-	p2w,r619ac-128m |\
-	p2w,r619ac |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x1000 0x2f20
 		;;
@@ -95,15 +96,24 @@ case "$FIRMWARE" in
 	cellc,rtl30vw |\
 	compex,wpj419 |\
 	compex,wpj428 |\
+	edgecore,ecw5211 |\
+	edgecore,oap100 |\
 	engenius,eap1300 |\
 	engenius,eap2200 |\
+	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200 |\
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2 |\
 	unielec,u4019-32m)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+		;;
 	dlink,dap-2610)
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
@@ -120,7 +130,12 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
 		;;
-	linksys,ea8300)
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		;;
+    pangu,l1000)
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
 		;;
@@ -148,12 +163,11 @@ case "$FIRMWARE" in
 	alfa-network,ap120c-ac |\
 	cilab,meshpoint-one |\
 	ezviz,cs-w3-wd1200g-eup |\
+	glinet,gl-ap1300 |\
 	glinet,gl-b1300 |\
 	glinet,gl-s1300 |\
 	linksys,ea6350v3 |\
 	mobipromo,cm520-79f |\
-	p2w,r619ac-128m |\
-	p2w,r619ac |\
 	qcom,ap-dk01.1-c1)
 		caldata_extract "ART" 0x5000 0x2f20
 		;;
@@ -190,15 +204,24 @@ case "$FIRMWARE" in
 	cellc,rtl30vw |\
 	compex,wpj419 |\
 	compex,wpj428 |\
+	edgecore,ecw5211 |\
+	edgecore,oap100 |\
 	engenius,eap1300 |\
 	engenius,eap2200 |\
+	luma,wrtq-329acn|\
 	openmesh,a42 |\
 	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200 |\
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2 |\
 	unielec,u4019-32m)
 		caldata_extract "0:ART" 0x5000 0x2f20
 		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+		;;
 	dlink,dap-2610)
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
@@ -215,7 +238,12 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
 		;;
-	linksys,ea8300)
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
+    pangu,l1000)
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 		;;
@@ -239,4 +267,4 @@ case "$FIRMWARE" in
 *)
 	exit 1
 	;;
-esac
+esac

root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network

@@ -0,0 +1,205 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=99
+STOP=98
+
+rps_flow_cnt=4096
+core_count=$(grep -c processor /proc/cpuinfo)
+rps_sock_flow_ent=`expr $core_count \* $rps_flow_cnt`
+queue_cores="0 1 2"
+queue_irq_cores="1 2"
+wifi_core="3"
+usb_core="0"
+
+############### util functions ###############
+
+to_hex_list() {
+	local cores=$1
+	local converted=""
+	for core in $(echo $cores | awk '{print}')
+	do
+		local hex="$(gen_hex_mask "$core")"
+		converted="$converted $hex"
+	done
+	echo `echo $converted | sed 's/^ *//'`
+}
+
+gen_hex_mask() {
+	local cores=$1
+	local mask=0
+	for core in $(echo $cores | awk '{print}')
+	do
+		local bit="$((1 << $core))"
+		let "mask = mask + bit"
+	done
+	local hex="$(printf %x "$mask")"
+	echo "$hex"
+}
+
+val_at_index() {
+	local values=$1
+	local idx=$2
+	echo `echo $values | awk -v i=$idx '{print $i}'`
+}
+
+size_of_list() {
+	local list=$1
+	local spaces=`echo $list | grep -o ' ' | wc -l`
+	echo `expr $spaces + 1`
+}
+
+set_core_mask() {
+	local file=$1
+	local cores=$2
+	local mask="$(gen_hex_mask "$cores")"
+	echo $mask > $file
+}
+
+set_core_mask_round() {
+	local files=$1
+	local cores=$2
+	local step_size=$3
+	[ ! -n "$3" ] && step_size=1
+	
+	local core_count="$(size_of_list "$cores")"
+	local counter=0
+	local idx=1
+	local roof=`expr $core_count \* $step_size`
+	for file in $(echo $files | awk '{print}')
+	do
+		let "idx = counter / step_size + 1"
+		local core="$(val_at_index "$cores" $idx)"
+		set_core_mask $file $core
+		let "counter = counter + 1"
+		[ $counter -ge $roof ] && counter=0
+	done
+}
+
+############### assign network queues ###############
+
+set_interface_round() {
+	local interface=$1
+	local cores=$2
+	local step_size=$3
+	[ ! -n "$3" ] && step_size=1
+	
+	echo "using round mask for interface: $interface, step size: $step_size"
+	set_core_mask_round "$(ls /sys/class/net/$interface/queues/tx-*/xps_cpus)" "$cores" $step_size
+	set_core_mask_round "$(ls /sys/class/net/$interface/queues/rx-*/rps_cpus)" "$cores" $step_size
+	
+	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_flow_cnt
+	do
+		echo $rps_flow_cnt > $file
+	done
+}
+
+set_interface() {
+	local interface=$1
+	local cores=$2
+	
+	echo "using cores: $cores for interface: $interface"
+	
+	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_cpus
+	do
+		set_core_mask $file "$cores"
+		echo $rps_flow_cnt > `dirname $file`/rps_flow_cnt
+	done
+
+	for file in /sys/class/net/$interface/queues/tx-[0-9]*/xps_cpus
+	do
+		set_core_mask $file "$cores"
+	done
+}
+
+set_interface_queues() {
+	echo "using cpu: $queue_cores for network queues"
+	for dev in /sys/class/net/eth*
+	do
+		[ -d "$dev" ] || continue
+		
+		local interface=`basename $dev`
+		
+		set_interface $interface "$queue_cores"
+	done
+
+	for dev in /sys/class/net/wlan*
+	do
+		[ -d "$dev" ] || continue
+		
+		local interface=`basename $dev`
+		
+		set_interface $interface "$queue_cores"
+	done
+	
+	for dev in /sys/class/net/eth*
+	do
+		local eth=`basename $dev`
+		echo "enabling offload on $eth"
+		ethtool -K $eth rx-checksum on >/dev/null 2>&1
+		ethtool -K $eth tx-checksum-ip-generic on >/dev/null 2>&1 || (
+		ethtool -K $eth tx-checksum-ipv4 on >/dev/null 2>&1
+		ethtool -K $eth tx-checksum-ipv6 on >/dev/null 2>&1)
+		ethtool -K $eth tx-scatter-gather on >/dev/null 2>&1
+		ethtool -K $eth gso on >/dev/null 2>&1
+		ethtool -K $eth gro on >/dev/null 2>&1
+		ethtool -K $eth lro on >/dev/null 2>&1
+		ethtool -K $eth tso on >/dev/null 2>&1
+		ethtool -K $eth ufo on >/dev/null 2>&1
+	done
+	
+	echo $rps_sock_flow_ent > /proc/sys/net/core/rps_sock_flow_entries
+	sysctl -w net.core.rps_sock_flow_entries=$rps_sock_flow_ent
+}
+
+############### assign interrupts ###############
+set_irq_cores() {
+	local mask="$(gen_hex_mask "$2")"
+	echo "set mask $mask for irq: $1"
+	echo $mask > "/proc/irq/$1/smp_affinity"
+}
+
+set_irq_pattern() {
+	local name_pattern="$1"
+	local cores="$2"
+	
+	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
+	do
+		set_irq_cores $irq "$cores"
+	done
+}
+
+set_irq_interleave() {
+	local name_pattern=$1
+	local cores=$2
+	local step_size=$3
+	
+	local files=""
+	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
+	do
+		files="$files\
+		/proc/irq/$irq/smp_affinity"
+	done
+	
+	set_core_mask_round "$files" "$cores" "$step_size"
+}
+
+set_irqs() {
+	#dma
+	set_irq_pattern bam_dma "$usb_core"
+
+	#ethernet
+	set_irq_interleave eth_tx "$queue_irq_cores" 4
+	set_irq_interleave eth_rx "$queue_irq_cores" 1
+
+	#pcie
+	set_irq_pattern pcie "$wifi_core"
+
+	#usb
+	set_irq_pattern usb "$usb_core"
+}
+
+start() {
+	set_interface_queues
+	set_irqs
+}

root/target/linux/ipq40xx/base-files/lib/adjust_network.sh

@@ -0,0 +1,86 @@
+#!/bin/sh
+# this scripts is used for adjust cpu's choice of interrupts.
+#
+
+################################################
+# Adjust smp_affinity of edma
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    execute only once on start-up.
+################################################
+adjust_edma_smp_affinity() {
+	grep -q edma_eth_ /proc/interrupts || return 0
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local cpu=0
+	local tx_irq_num
+
+	for tx_num in `seq 0 1 15` ; do
+		cpu=`printf "%x" $((1<<((tx_num/4+3)%nr)))`
+		tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
+	done
+
+	for rx_num in `seq 0 1 7` ; do
+		cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
+		rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
+	done
+}
+
+################################################
+# Adjust smp_affinity of ath10k for 2G and 5G
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    execute only once on start-up.
+################################################
+adjust_radio_smp_affinity() {
+	local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local idx=2
+
+	for irq in $irqs; do
+		cpu=`printf "%x" $((1<<((idx)%nr)))`
+		echo $cpu > /proc/irq/$irq/smp_affinity
+		idx=$((idx+1))
+	done
+}
+
+################################################
+# Adjust queue of eth
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    Each network reboot needs to be executed.
+################################################
+adjust_eth_queue() {
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local cpu=`printf "%x" $(((1<<nr)-1))`
+
+	for epath in /sys/class/net/eth[0-9]*; do
+		test -e $epath || break
+		echo $epath | grep -q "\." && continue
+		eth=`basename $epath`
+		for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
+			test -e $exps || break
+			echo $cpu > $exps
+			echo 256 > `dirname $exps`/rps_flow_cnt
+		done
+		which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
+	done
+
+	echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
+}

root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh

@@ -0,0 +1,122 @@
+linksys_get_target_firmware() {
+	local cur_boot_part mtd_ubi0
+
+	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
+	if [ -z "${cur_boot_part}" ]; then
+		mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
+		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
+		kernel|rootfs)
+			cur_boot_part=1
+			;;
+		alt_kernel|alt_rootfs)
+			cur_boot_part=2
+			;;
+		esac
+		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
+			"${cur_boot_part}" "${mtd_ubi0}"
+	fi
+
+	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
+	#  if test $auto_recovery = no;
+	#      then bootipq;
+	#  elif test $boot_part = 1;
+	#      then run bootpart1;
+	#      else run bootpart2;
+	#  fi
+
+	case "$cur_boot_part" in
+	1)
+		fw_setenv -s - <<-EOF
+			boot_part 2
+			auto_recovery yes
+		EOF
+		printf "alt_kernel"
+		return
+		;;
+	2)
+		fw_setenv -s - <<-EOF
+			boot_part 1
+			auto_recovery yes
+		EOF
+		printf "kernel"
+		return
+		;;
+	*)
+		return
+		;;
+	esac
+}
+
+linksys_get_root_magic() {
+	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
+platform_do_upgrade_linksys() {
+	local magic_long="$(get_magic_long "$1")"
+
+	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
+	local vol
+
+	mkdir -p /var/lock
+	local part_label="$(linksys_get_target_firmware)"
+	touch /var/lock/fw_printenv.lock
+
+	if [ -z "$part_label" ]; then
+		echo "cannot find target partition"
+		exit 1
+	fi
+
+	local target_mtd=$(find_mtd_part "$part_label")
+
+	[ "$magic_long" = "73797375" ] && {
+		CI_KERNPART="$part_label"
+		if [ "$part_label" = "kernel" ]; then
+			CI_UBIPART="rootfs"
+		else
+			CI_UBIPART="alt_rootfs"
+		fi
+
+		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
+		if [ ! "$mtdnum" ]; then
+			echo "cannot find ubi mtd partition $CI_UBIPART"
+			return 1
+		fi
+
+		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		if [ ! "$ubidev" ]; then
+			ubiattach -m "$mtdnum"
+			sync
+			ubidev="$(nand_find_ubi "$CI_UBIPART")"
+		fi
+
+		if [ "$ubidev" ]; then
+			for vol in $rm_oem_fw_vols; do
+				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
+			done
+		fi
+
+		# complete std upgrade
+		nand_upgrade_tar "$1"
+	}
+
+	[ "$magic_long" = "27051956" ] && {
+		# This magic is for a uImage (which is a sysupgrade image)
+		# check firmwares' rootfs types
+		local oldroot="$(linksys_get_root_magic "$target_mtd")"
+		local newroot="$(linksys_get_root_magic "$1")"
+
+		if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
+			# we're upgrading from a firmware with UBI to one with UBI
+			# erase everything to be safe
+			# - Is that really needed? Won't remove (or comment) the if,
+			#   because it may be needed in a future device.
+			#mtd erase $part_label
+			#get_image "$1" | mtd -n write - $part_label
+			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
+			get_image "$1" | mtd write - "$part_label"
+		else
+			echo "writing \"$1\" image to \"$part_label\""
+			get_image "$1" | mtd write - "$part_label"
+		fi
+	}
+}

root/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh

@@ -0,0 +1,106 @@
+# The U-Boot loader of the OpenMesh devices requires image sizes and
+# checksums to be provided in the U-Boot environment.
+# The OpenMesh devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_do_upgrade_openmesh() {
+	local tar_file="$1"
+	local restore_backup
+	local primary_kernel_mtd
+
+	local setenv_script="/tmp/fw_env_upgrade"
+
+	local kernel_mtd="$(find_mtd_index $PART_NAME)"
+	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
+	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
+
+	# detect to which flash region the new image is written to.
+	#
+	# 1. check what is the mtd index for the first flash region on this
+	#    device
+	# 2. check if the target partition ("inactive") has the mtd index of
+	#    the first flash region
+	#
+	#    - when it is: the new bootseq will be 1,2 and the first region is
+	#      modified
+	#    - when it isnt: bootseq will be 2,1 and the second region is
+	#      modified
+	#
+	# The detection has to be done via the hardcoded mtd partition because
+	# the current boot might be done with the fallback region. Let us
+	# assume that the current bootseq is 1,2. The bootloader detected that
+	# the image in flash region 1 is corrupt and thus switches to flash
+	# region 2. The bootseq in the u-boot-env is now still the same and
+	# the sysupgrade code can now only rely on the actual mtd indexes and
+	# not the bootseq variable to detect the currently booted flash
+	# region/image.
+	#
+	# In the above example, an implementation which uses bootseq ("1,2") to
+	# detect the currently booted image would assume that region 1 is booted
+	# and then overwrite the variables for the wrong flash region (aka the
+	# one which isn't modified). This could result in a device which doesn't
+	# boot anymore to Linux until it was reflashed with ap51-flash.
+	local next_boot_part="1"
+	case "$(board_name)" in
+	openmesh,a42)
+		primary_kernel_mtd=8
+		;;
+	openmesh,a62)
+		primary_kernel_mtd=10
+		;;
+	*)
+		echo "failed to detect primary kernel mtd partition for board"
+		return 1
+		;;
+	esac
+	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
+	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
+	# rootfs without EOF marker
+	rootfs_length=$((rootfs_length-4))
+
+	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
+	# md5 checksum of rootfs with EOF marker
+	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
+
+	#
+	# add tar support to get_image() to use default_do_upgrade() instead?
+	#
+
+	# take care of restoring a saved config
+	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
+
+	mtd -q erase inactive
+	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
+	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
+
+	# prepare new u-boot env
+	if [ "$next_boot_part" = "1" ]; then
+		echo "bootseq 1,2" > $setenv_script
+	else
+		echo "bootseq 2,1" > $setenv_script
+	fi
+
+	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
+	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
+	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
+	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
+
+	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
+	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
+	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
+	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
+
+	# store u-boot env changes
+	mkdir -p /var/lock
+	fw_setenv -s $setenv_script || {
+		echo "failed to update U-Boot environment"
+		return 1
+	}
+}

root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh

@@ -59,6 +59,7 @@ platform_do_upgrade() {
 	case "$(board_name)" in
 	8dev,jalapeno |\
 	aruba,ap-303 |\
+    pangu,l1000 |\
 	aruba,ap-303h |\
 	aruba,ap-365 |\
 	avm,fritzbox-7530 |\
@@ -66,8 +67,14 @@ platform_do_upgrade() {
 	avm,fritzrepeater-3000 |\
 	buffalo,wtr-m2133hp |\
 	cilab,meshpoint-one |\
+	edgecore,ecw5211 |\
+	edgecore,oap100 |\
 	engenius,eap2200 |\
+	glinet,gl-ap1300 |\
+	luma,wrtq-329acn |\
 	mobipromo,cm520-79f |\
+    p2w,r619ac-64m |\
+ 	p2w,r619ac-128m |\
 	qxwlan,e2600ac-c2)
 		nand_do_upgrade "$1"
 		;;
@@ -95,13 +102,12 @@ platform_do_upgrade() {
 		CI_UBIPART="ubifs"
 		askey_do_upgrade "$1"
 		;;
-	compex,wpj419|\
+	compex,wpj419)
-	p2w,r619ac-128m|\
-	p2w,r619ac)
 		nand_do_upgrade "$1"
 		;;
 	linksys,ea6350v3 |\
-	linksys,ea8300)
+	linksys,ea8300 |\
+	linksys,mr8300)
 		platform_do_upgrade_linksys "$1"
 		;;
 	meraki,mr33)
@@ -109,9 +115,11 @@ platform_do_upgrade() {
 		nand_do_upgrade "$1"
 		;;
 	openmesh,a42 |\
-	openmesh,a62)
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200)
 		PART_NAME="inactive"
-		platform_do_upgrade_openmesh "$1"
+		platform_do_upgrade_dualboot_datachk "$1"
 		;;
 	zyxel,nbg6617)
 		zyxel_do_upgrade "$1"
@@ -120,4 +128,4 @@ platform_do_upgrade() {
 		default_do_upgrade "$1"
 		;;
 	esac
-}
+}

root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts

@@ -1,4 +1,8 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+ *
+ * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
+ *
+ */
 
 #include "qcom-ipq4019.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -6,12 +10,26 @@
 #include <dt-bindings/soc/qcom,tcsr.h>
 
 / {
-	aliases {
+
-		led-boot = &led_sys;
+	model = "GZ841902_55860.com";
-		led-failsafe = &led_sys;
+	compatible = "pangu,l1000", "qcom,ipq4019";
-		led-running = &led_sys;
+
-		led-upgrade = &led_sys;
+	
-		label-mac-device = &gmac0;
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>; /* 512MB */
+	};
+
+        aliases {
+		sdhc1 = &sdhci;
+		led-boot = &power;
+		led-failsafe = &power;
+		led-running = &power;
+		led-upgrade = &power;
+        };
+
+	chosen {
+		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
 	};
 
 	soc {
@@ -23,6 +41,8 @@
 			status = "okay";
 			pinctrl-0 = <&mdio_pins>;
 			pinctrl-names = "default";
+ 			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
+			reset-delay-us = <2000>;
 		};
 
 		ess-psgmii@98000 {
@@ -36,9 +56,11 @@
 		};
 
 		tcsr@194b000 {
+			/* select hostmode */
 			compatible = "qcom,tcsr";
 			reg = <0x194b000 0x100>;
 			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+			status = "okay";
 		};
 
 		ess_tcsr@1953000 {
@@ -71,6 +93,15 @@
 
 		ess-switch@c000000 {
 			status = "okay";
+			switch_lan_bmp = <0x18>;
+			switch_wan_bmp = <0x20>;
+		};
+
+		i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+
+			status = "okay";
 		};
 
 		edma@c080000 {
@@ -78,29 +109,6 @@
 		};
 	};
 
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_sys: sys {
-			label = "r619ac:blue:sys";
-			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "r619ac:blue:wlan2g";
-			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "r619ac:blue:wlan5g";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
 	keys {
 		compatible = "gpio-keys";
 
@@ -110,90 +118,63 @@
 			linux,code = <KEY_RESTART>;
 		};
 	};
-};
 
-&blsp_dma {
+	leds {
-	status = "okay";
+		compatible = "gpio-leds";
-};
 
-&blsp1_spi1 {
+		power: status {
-	status = "okay";
+			label = "blue:status";
-
+			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "Bootloader";
-				reg = <0x0 0x170000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "unused";
-				reg = <0x180000 0xe80000>;
-			};
 		};
+
+		wlan2g {
+			label = "blue:wlan2g";
+			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
+		};
+
+		wlan5g {
+			label = "bule:wlan5g";
+			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wan {
+			label = "bule:wan";
+			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+		};     
+		4g1 {
+			label = "bule:4g1";
+			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+		};     
+		4g2 {
+			label = "bule:4g2";
+			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+		};     
+		4g3 {
+			label = "bule:4g3";
+			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+		};     
+	    usb {
+			label = "bule:usb";
+			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+			trigger-sources = <&usb2>, <&usb3>;
+			linux,default-trigger = "usbport";
+		};   
 	};
 };
 
-&blsp1_uart1 {
+&vqmmc {
-	pinctrl-0 = <&serial_0_pins>;
+	status = "okay";
+};
+
+&sdhci {
+	status = "okay";
+	pinctrl-0 = <&sd_pins>;
 	pinctrl-names = "default";
+	cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+	vqmmc-supply = <&vqmmc>;
+};
+
+&blsp_dma {
 	status = "okay";
 };
 
@@ -201,7 +182,72 @@
 	status = "okay";
 };
 
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			SBL1@0 {
+				label = "SBL1";
+				reg = <0x0 0x40000>;
+				read-only;
+			};
+
+			MIBIB@40000 {
+				label = "MIBIB";
+				reg = <0x40000 0x20000>;
+			};
+
+			QSEE@60000 {
+				label = "QSEE";
+				reg = <0x60000 0x60000>;
+				read-only;
+			};
+
+			CDT@c0000 {
+				label = "CDT";
+				reg = <0xc0000 0x10000>;
+				read-only;
+			};
+
+			DDRPARAMS@d0000 {
+				label = "DDRPARAMS";
+				reg = <0xd0000 0x10000>;
+				read-only;
+			};
+
+			APPSBLENV@e0000 {
+				label = "APPSBLENV";
+				reg = <0xe0000 0x10000>;
+			};
+
+			APPSBL@f0000 {
+				label = "APPSBL";
+				reg = <0xf0000 0x80000>;
+			};
+
+			ART@170000 {
+				label = "ART";
+				reg = <0x170000 0x10000>;
+			};
+		};
+	};
+};
+
 &nand {
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
 	status = "okay";
 
 	nand@0 {
@@ -210,14 +256,9 @@
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			rootfs_part1: partition@0 {
+			rootfs@0 {
 				label = "rootfs";
-				reg = <0x0 0x4000000>;
+				reg = <0x0 0x8000000>;
-			};
-
-			rootfs_part2: partition@4000000 {
-				label = "unused1";
-				reg = <0x4000000 0x4000000>;
 			};
 		};
 	};
@@ -227,43 +268,20 @@
 	status = "okay";
 };
 
-&sdhci {
+&blsp1_uart1 {
-	pinctrl-0 = <&sd_0_pins>;
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&blsp1_uart2 {
+	pinctrl-0 = <&serial_1_pins>;
 	pinctrl-names = "default";
-	vqmmc-supply = <&vqmmc>;
 	status = "okay";
 };
 
 &tlmm {
-	mdio_pins: mdio_pinmux {
+	serial_pins: serial_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	sd_0_pins: sd_0_pinmux {
-		mux_1 {
-			pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28";
-			function = "sdio";
-			drive-strength = <10>;
-		};
-
-		mux_2 {
-			pins = "gpio27";
-			function = "sdio";
-			drive-strength = <16>;
-		};
-	};
-
-	serial_0_pins: serial0-pinmux {
 		mux {
 			pins = "gpio16", "gpio17";
 			function = "blsp_uart0";
@@ -271,31 +289,101 @@
 		};
 	};
 
-	led_pins: led_pinmux {
+	mdio_pins: mdio_pinmux {
-		mux {
-			pins = "gpio32", "gpio39", "gpio50";
-			function = "gpio";
-			bias-pull-up;
-			output-low;
-		};
-
 		mux_1 {
-			pins = "gpio52";
+			pins = "gpio6";
-			function = "gpio";
+			function = "mdio";
 			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio7";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	serial_1_pins: serial1_pinmux {
+		mux {
+			pins = "gpio8", "gpio9",
+				"gpio10", "gpio11";
+			function = "blsp_uart1";
+			bias-disable;
+		};
+	};
+
+	i2c_0_pins: i2c-0-pinmux {
+		mux {
+			pins = "gpio20", "gpio21";
+			function = "blsp_i2c0";
+			bias-disable;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pinmux {
+			function = "blsp_spi0";
+			pins = "gpio13", "gpio14", "gpio15";
+		};
+		pinmux_cs {
+			function = "gpio";
+			pins = "gpio12";
+		};
+		pinconf {
+			pins = "gpio13", "gpio14", "gpio15";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pinconf_cs {
+			pins = "gpio12";
+			drive-strength = <2>;
+			bias-disable;
 			output-high;
 		};
+	};
 
-		mux_2 {
+	nand_pins: nand_pins {
-			pins = "gpio61";
+		pullups {
-			function = "gpio";
+			pins = "gpio52", "gpio53", "gpio58",
+				"gpio59";
+			function = "qpic";
+			bias-pull-up;
+		};
+
+		pulldowns {
+			pins = "gpio54", "gpio55", "gpio56",
+				"gpio57", "gpio60", "gpio61",
+				"gpio62", "gpio63", "gpio64",
+				"gpio65", "gpio66", "gpio67",
+				"gpio68", "gpio69";
+			function = "qpic";
 			bias-pull-down;
-			output-high;
+		};
+	};
+
+	sd_pins: sd_pins {
+		pinmux {
+			function = "sdio";
+			pins = "gpio23", "gpio24", "gpio25", "gpio26",
+				"gpio28", "gpio29", "gpio30", "gpio31";
+			drive-strength = <10>;
+		};
+
+		pinmux_sd_clk {
+			function = "sdio";
+			pins = "gpio27";
+			drive-strength = <16>;
+		};
+
+		pinmux_sd7 {
+			function = "sdio";
+			pins = "gpio32";
+			drive-strength = <10>;
+			bias-disable;
 		};
 	};
 };
 
-&usb3_ss_phy {
+&usb2_hs_phy {
 	status = "okay";
 };
 
@@ -303,20 +391,16 @@
 	status = "okay";
 };
 
-&usb2_hs_phy {
+&usb3_ss_phy {
-	status = "okay";
-};
-
-&vqmmc {
 	status = "okay";
 };
 
 &wifi0 {
 	status = "okay";
-	qcom,ath10k-calibration-variant = "R619AC";
+	qcom,ath10k-calibration-variant = "PANGU-L1000";
 };
 
 &wifi1 {
 	status = "okay";
-	qcom,ath10k-calibration-variant = "R619AC";
+	qcom,ath10k-calibration-variant = "PANGU-L1000";
-};
+};

root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts

@@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC 128M";
-	compatible = "p2w,r619ac-128m";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};
-
-&rootfs_part1 {
-	reg = <0x0 0x8000000>;
-};
-
-/delete-node/ &rootfs_part2;

root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts

@@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC";
-	compatible = "p2w,r619ac";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};

root/target/linux/ipq40xx/image/generic.mk

@@ -1,23 +1,8 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
 
 DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
 DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
 DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
 
-define Device/Default
-	PROFILES := Default
-	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
-	KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
-	KERNEL_PREFIX := $$(IMAGE_PREFIX)
-	KERNEL_LOADADDR := 0x80208000
-	DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
-	SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
-	IMAGE/sysupgrade.bin/squashfs :=
-endef
-
 define Device/FitImage
 	KERNEL_SUFFIX := -fit-uImage.itb
 	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
@@ -130,6 +115,21 @@ define Device/8dev_jalapeno
 endef
 TARGET_DEVICES += 8dev_jalapeno
 
+define Device/pangu_l1000
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := PANGU
+	DEVICE_MODEL := L1000
+	SOC := qcom-ipq4019
+	DEVICE_DTS := qcom-ipq4019-l1000
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := l1000
+	DEVICE_PACKAGES := ipq-wifi-pangu_l1000
+endef
+TARGET_DEVICES += pangu_l1000
+
 define Device/alfa-network_ap120c-ac
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -156,6 +156,7 @@ endef
 define Device/aruba_ap-303
 	$(call Device/aruba_glenmorangie)
 	DEVICE_MODEL := AP-303
+	DEVICE_PACKAGES += uboot-envtools
 endef
 TARGET_DEVICES += aruba_ap-303
 
@@ -168,7 +169,7 @@ TARGET_DEVICES += aruba_ap-303h
 define Device/aruba_ap-365
 	$(call Device/aruba_glenmorangie)
 	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES += kmod-hwmon-ad7418
+	DEVICE_PACKAGES += kmod-hwmon-ad7418 uboot-envtools
 endef
 TARGET_DEVICES += aruba_ap-365
 
@@ -317,6 +318,25 @@ define Device/compex_wpj428
 endef
 TARGET_DEVICES += compex_wpj428
 
+define Device/devolo_magic-2-wifi-next
+	$(call Device/FitImage)
+	DEVICE_VENDOR := devolo
+	DEVICE_MODEL := Magic 2 WiFi next
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+
+	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
+	# it will bootm it, just like we want for the initramfs.
+	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
+		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
+
+	IMAGE_SIZE := 26624k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
+endef
+TARGET_DEVICES += devolo_magic-2-wifi-next
+
 define Device/dlink_dap-2610
 	$(call Device/FitImageLzma)
 	DEVICE_VENDOR := D-Link
@@ -344,6 +364,32 @@ define Device/dlink_dap-2610
 endef
 TARGET_DEVICES += dlink_dap-2610
 
+define Device/edgecore_ecw5211
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := ECW5211
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
+endef
+TARGET_DEVICES += edgecore_ecw5211
+
+define Device/edgecore_oap100
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := OAP100
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGES := nand-sysupgrade.bin
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+endef
+TARGET_DEVICES += edgecore_oap100
+
 define Device/engenius_eap1300
 	$(call Device/FitImage)
 	DEVICE_VENDOR := EnGenius
@@ -437,6 +483,21 @@ define Device/ezviz_cs-w3-wd1200g-eup
 endef
 TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
 
+define Device/glinet_gl-ap1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-AP1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+	KERNEL_INSTALL := 1
+	DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+endef
+TARGET_DEVICES += glinet_gl-ap1300
+
 define Device/glinet_gl-b1300
 	$(call Device/FitImage)
 	DEVICE_VENDOR := GL.iNet
@@ -515,6 +576,34 @@ define Device/linksys_ea8300
 endef
 TARGET_DEVICES += linksys_ea8300
 
+define Device/linksys_mr8300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MR8300
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 3072k
+	IMAGE_SIZE := 87040k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
+	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_mr8300
+
+define Device/luma_wrtq-329acn
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Luma Home
+	DEVICE_MODEL := WRTQ-329ACN
+	SOC := qcom-ipq4018
+	DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
+	IMAGE_SIZE := 76632k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += luma_wrtq-329acn
+
 define Device/meraki_mr33
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Cisco Meraki
@@ -540,6 +629,7 @@ TARGET_DEVICES += mobipromo_cm520-79f
 
 define Device/netgear_ex61x0v2
 	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
 	DEVICE_DTS_CONFIG := config@4
 	NETGEAR_BOARD_ID := EX6150v2series
 	NETGEAR_HW_ID := 29765285+16+0+128+2x2
@@ -549,7 +639,6 @@ endef
 
 define Device/netgear_ex6100v2
 	$(call Device/netgear_ex61x0v2)
-	DEVICE_VENDOR := Netgear
 	DEVICE_MODEL := EX6100
 	DEVICE_VARIANT := v2
 endef
@@ -557,7 +646,6 @@ TARGET_DEVICES += netgear_ex6100v2
 
 define Device/netgear_ex6150v2
 	$(call Device/netgear_ex61x0v2)
-	DEVICE_VENDOR := Netgear
 	DEVICE_MODEL := EX6150
 	DEVICE_VARIANT := v2
 endef
@@ -593,9 +681,40 @@ define Device/openmesh_a62
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
 endef
-
 TARGET_DEVICES += openmesh_a62
 
+define Device/plasmacloud_pa1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA1200
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@pc.pa1200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15616k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
+endef
+TARGET_DEVICES += plasmacloud_pa1200
+
+define Device/plasmacloud_pa2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA2200
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@pc.pa2200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
+endef
+TARGET_DEVICES += plasmacloud_pa2200
+
 define Device/qcom_ap-dk01.1-c1
 	DEVICE_VENDOR := Qualcomm Atheros
 	DEVICE_MODEL := AP-DK01.1
@@ -627,35 +746,6 @@ define Device/qcom_ap-dk04.1-c1
 endef
 TARGET_DEVICES += qcom_ap-dk04.1-c1
 
-define Device/p2w_r619ac
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := P&W
-	DEVICE_MODEL := R619AC
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGES += nand-factory.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
-endef
-TARGET_DEVICES += p2w_r619ac
-
-define Device/p2w_r619ac-128m
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := P&W
-	DEVICE_MODEL := R619AC
-	DEVICE_VARIANT := 128M
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
-endef
-TARGET_DEVICES += p2w_r619ac-128m
-
 define Device/qxwlan_e2600ac-c1
 	$(call Device/FitImage)
 	DEVICE_VENDOR := Qxwlan
@@ -729,6 +819,4 @@ define Device/zyxel_wre6606
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
-TARGET_DEVICES += zyxel_wre6606
+TARGET_DEVICES += zyxel_wre6606
-
-$(eval $(call BuildImage))

root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch

@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
@@ -18,19 +18,25 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4018-ap120c-ac.dtb \
 +	qcom-ipq4018-dap-2610.dtb \
 +	qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
++	qcom-ipq4018-magic-2-wifi-next.dtb \
 +	qcom-ipq4018-ea6350v3.dtb \
 +	qcom-ipq4018-eap1300.dtb \
++	qcom-ipq4018-ecw5211.dtb \
 +	qcom-ipq4018-emd1.dtb \
 +	qcom-ipq4018-emr3500.dtb \
 +	qcom-ipq4018-ens620ext.dtb \
 +	qcom-ipq4018-ex6100v2.dtb \
 +	qcom-ipq4018-ex6150v2.dtb \
 +	qcom-ipq4018-fritzbox-4040.dtb \
++	qcom-ipq4018-gl-ap1300.dtb \
 +	qcom-ipq4018-jalapeno.dtb \
 +	qcom-ipq4018-meshpoint-one.dtb \
 +	qcom-ipq4018-nbg6617.dtb \
++	qcom-ipq4019-oap100.dtb \
++	qcom-ipq4018-pa1200.dtb \
 +	qcom-ipq4018-rt-ac58u.dtb \
 +	qcom-ipq4018-wre6606.dtb \
++	qcom-ipq4018-wrtq-329acn.dtb \
  	qcom-ipq4019-ap.dk01.1-c1.dtb \
  	qcom-ipq4019-ap.dk04.1-c1.dtb \
  	qcom-ipq4019-ap.dk04.1-c3.dtb \
@@ -43,12 +49,12 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4019-fritzbox-7530.dtb \
 +	qcom-ipq4019-fritzrepeater-1200.dtb \
 +	qcom-ipq4019-fritzrepeater-3000.dtb \
-+	qcom-ipq4019-r619ac.dtb \
-+	qcom-ipq4019-r619ac-128m.dtb \
 +	qcom-ipq4019-map-ac2200.dtb \
++	qcom-ipq4019-mr8300.dtb \
 +	qcom-ipq4019-e2600ac-c1.dtb \
 +	qcom-ipq4019-e2600ac-c2.dtb \
 +	qcom-ipq4019-habanero-dvk.dtb \
++	qcom-ipq4019-pa2200.dtb \
 +	qcom-ipq4019-rtl30vw.dtb \
 +	qcom-ipq4019-u4019-32m.dtb \
 +	qcom-ipq4019-wpj419.dtb \
@@ -60,6 +66,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4029-gl-b1300.dtb \
 +	qcom-ipq4029-gl-s1300.dtb \
 +	qcom-ipq4029-mr33.dtb \
++	qcom-ipq4019-l1000.dtb \
  	qcom-ipq8064-ap148.dtb \
  	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8960-cdp.dtb \

root/target/linux/ipq40xx/patches-5.4/999-ipq40xx-unlock-cpu-frequency.patch

@@ -0,0 +1,53 @@
+From: William <gw826943555@qq.com>
+Subject: [PATCH] ipq40xx: improve CPU clock
+Date: Tue, 15 Dec 2020 15:26:35 +0800
+
+This patch will match the clock-latency-ns values in the device tree 
+for those found inside the OEM device tree and kernel source code and 
+unlock 896Mhz CPU operating points.
+
+Signed-off-by: William <gw826943555@qq.com>
+---
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -114,20 +114,24 @@
+ 
+ 		opp-48000000 {
+ 			opp-hz = /bits/ 64 <48000000>;
+-			clock-latency-ns = <256000>;
++			clock-latency-ns = <100000>;
+ 		};
+ 		opp-200000000 {
+ 			opp-hz = /bits/ 64 <200000000>;
+-			clock-latency-ns = <256000>;
++			clock-latency-ns = <100000>;
+ 		};
+ 		opp-500000000 {
+ 			opp-hz = /bits/ 64 <500000000>;
+-			clock-latency-ns = <256000>;
++			clock-latency-ns = <100000>;
+ 		};
+ 		opp-716000000 {
+ 			opp-hz = /bits/ 64 <716000000>;
+-			clock-latency-ns = <256000>;
++			clock-latency-ns = <100000>;
+  		};
++		opp-896000000 {
++			opp-hz = /bits/ 64 <896000000>;
++			clock-latency-ns = <100000>;
++		};
+ 	};
+ 
+ 	memory {
+--- a/drivers/clk/qcom/gcc-ipq4019.c
++++ b/drivers/clk/qcom/gcc-ipq4019.c
+@@ -579,6 +579,9 @@ static const struct freq_tbl ftbl_gcc_ap
+ 	F(632000000, P_DDRPLLAPSS, 1, 0, 0),
+ 	F(672000000, P_DDRPLLAPSS, 1, 0, 0),
+ 	F(716000000, P_DDRPLLAPSS, 1, 0, 0),
++	F(768000000, P_DDRPLLAPSS, 1, 0, 0),
++	F(823000000, P_DDRPLLAPSS, 1, 0, 0),
++	F(896000000, P_DDRPLLAPSS, 1, 0, 0),
+ 	{ }
+ };
+ 

root/target/linux/mediatek/base-files/etc/uci-defaults/99-net-ps

@@ -1,6 +1,7 @@
-uci set network.globals.default_rps_val=14
+#!/bin/sh
-uci set network.globals.default_rps_flow_cnt=256
+uci -q set network.globals.default_rps_val=14
-uci set network.globals.default_xps_val=14
+uci -q set network.globals.default_rps_flow_cnt=256
-uci set network.globals.default_ps=1
+uci -q set network.globals.default_xps_val=14
-uci commit
+uci -q set network.globals.default_ps=1
+uci -q commit
 exit 0

root/target/linux/mediatek/base-files/lib/preinit/06_set_rps_sock_flow

@@ -1,8 +0,0 @@
-#!/bin/sh
-
-set_rps_sock_flow() {
-	echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
-}
-
-boot_hook_add preinit_main set_rps_sock_flow
-

root/target/linux/mediatek/base-files/lib/preinit/07_set_iface_mac

@@ -1,48 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2018 OpenWrt.org
-
-RECOVERY_PART=/dev/mmcblk0p1
-
-preinit_set_mac_address() {
-	local mac
-
-	. /lib/functions.sh
-	. /lib/functions/system.sh
-
-	case $(board_name) in
-	'bananapi,bpi-r2'|\
-	"unielec,u7623"*)
-		if [ -b $RECOVERY_PART ]; then
-			insmod nls_cp437
-			insmod nls_iso8859-1
-			insmod fat
-			insmod vfat
-			mkdir -p /tmp/recovery
-			mount -o rw,noatime $RECOVERY_PART /tmp/recovery
-
-			if [ -f "/tmp/recovery/mac_addr" ];
-			then
-				mac=$(cat /tmp/recovery/mac_addr)
-			else
-				mac=$(cat /sys/class/net/eth0/address)
-				echo "$mac" > /tmp/recovery/mac_addr
-			fi
-
-			sync
-			umount /tmp/recovery
-			rm -rf /tmp/recovery
-		fi
-
-		ip link set dev lan address $mac 2> /dev/null
-
-		mac=$(macaddr_add $mac 1)
-
-		ip link set dev wan1 address $mac 2>/dev/null
-		ip link set dev wan2 address $mac 2>/dev/null
-		ip link set dev wan3 address $mac 2>/dev/null
-		ip link set dev wan4 address $mac 2>/dev/null
-		;;
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address

root/target/linux/mediatek/base-files/lib/preinit/79_move_config

@@ -1,19 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2015 OpenWrt.org
-
-RECOVERY_PART=/dev/mmcblk0p1
-
-move_config() {
-	if [ -b $RECOVERY_PART ]; then
-		insmod nls_cp437
-		insmod nls_iso8859-1
-		insmod fat
-		insmod vfat
-		mkdir -p /recovery
-		mount -o rw,noatime $RECOVERY_PART /recovery
-		[ -f /recovery/sysupgrade.tgz ] && mv -f /recovery/sysupgrade.tgz /
-		umount /recovery
-	fi
-}
-
-boot_hook_add preinit_mount_root move_config

root/target/linux/mediatek/base-files/lib/preinit/90_init_jffs2

@@ -1,7 +0,0 @@
-#!/bin/sh
-do_firstboot() {
-	if [ "$(mount | grep jffs2)" = "" ]; then
-		/sbin/firstboot -y
-	fi
-}
-boot_hook_add preinit_main do_firstboot

root/target/linux/mediatek/mt7623/config-4.19

@@ -1,6 +1,8 @@
 # CONFIG_AIO is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_ARCH_AXXIA is not set
 CONFIG_ARCH_CLOCKSOURCE_DATA=y
+CONFIG_ARCH_DMA_ADDR_T_64BIT=y
 CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
 CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
 CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
@@ -8,6 +10,7 @@ CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
 CONFIG_ARCH_HAS_KCOV=y
 CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
 CONFIG_ARCH_HAS_PHYS_TO_DMA=y
+CONFIG_ARCH_HAS_PTE_SPECIAL=y
 CONFIG_ARCH_HAS_SET_MEMORY=y
 CONFIG_ARCH_HAS_SG_CHAIN=y
 CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
@@ -34,14 +37,16 @@ CONFIG_ARM=y
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ARCH_TIMER=y
 CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
+# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
 CONFIG_ARM_CPU_SUSPEND=y
 # CONFIG_ARM_CPU_TOPOLOGY is not set
 CONFIG_ARM_GIC=y
 CONFIG_ARM_HAS_SG_CHAIN=y
 CONFIG_ARM_L1_CACHE_SHIFT=6
 CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
+CONFIG_ARM_LPAE=y
 CONFIG_ARM_MEDIATEK_CPUFREQ=y
 CONFIG_ARM_PATCH_IDIV=y
 CONFIG_ARM_PATCH_PHYS_VIRT=y
@@ -50,31 +55,35 @@ CONFIG_ARM_THUMB=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_ARM_UNWIND=y
 CONFIG_ARM_VIRT_EXT=y
+CONFIG_ASN1=y
+CONFIG_ASSOCIATIVE_ARRAY=y
 CONFIG_ATAGS=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_BCM84881_PHY is not set
 CONFIG_BLK_MQ_PCI=y
-CONFIG_BOUNCE=y
 # CONFIG_CACHE_L2X0 is not set
 CONFIG_CLEANCACHE=y
 CONFIG_CLKDEV_LOOKUP=y
 CONFIG_CLKSRC_MMIO=y
 CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 rootfstype=squashfs,jffs2"
+CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 vmalloc=256M"
+CONFIG_CMDLINE_EXTEND=y
 CONFIG_COMMON_CLK=y
 CONFIG_COMMON_CLK_MEDIATEK=y
 CONFIG_COMMON_CLK_MT2701=y
-# CONFIG_COMMON_CLK_MT2701_AUDSYS is not set
+CONFIG_COMMON_CLK_MT2701_AUDSYS=y
 CONFIG_COMMON_CLK_MT2701_BDPSYS=y
 CONFIG_COMMON_CLK_MT2701_ETHSYS=y
-# CONFIG_COMMON_CLK_MT2701_G3DSYS is not set
+CONFIG_COMMON_CLK_MT2701_G3DSYS=y
 CONFIG_COMMON_CLK_MT2701_HIFSYS=y
 CONFIG_COMMON_CLK_MT2701_IMGSYS=y
 CONFIG_COMMON_CLK_MT2701_MMSYS=y
 CONFIG_COMMON_CLK_MT2701_VDECSYS=y
 # CONFIG_COMMON_CLK_MT7622 is not set
-# CONFIG_COMMON_CLK_MT7629 is not set
+CONFIG_COMMON_CLK_MT7629=y
+# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
+# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
 # CONFIG_COMMON_CLK_MT8135 is not set
 # CONFIG_COMMON_CLK_MT8173 is not set
 CONFIG_COREDUMP=y
@@ -109,6 +118,7 @@ CONFIG_CPU_SPECTRE=y
 CONFIG_CPU_THUMB_CAPABLE=y
 CONFIG_CPU_TLB_V7=y
 CONFIG_CPU_V7=y
+CONFIG_CRASH_CORE=y
 CONFIG_CRC16=y
 # CONFIG_CRC32_SARWATE is not set
 CONFIG_CRC32_SLICEBY8=y
@@ -116,18 +126,18 @@ CONFIG_CROSS_MEMORY_ATTACH=y
 CONFIG_CRYPTO_ACOMP2=y
 CONFIG_CRYPTO_AEAD=y
 CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_AKCIPHER=y
+CONFIG_CRYPTO_AKCIPHER2=y
 CONFIG_CRYPTO_CRC32=y
 CONFIG_CRYPTO_CRC32C=y
 CONFIG_CRYPTO_CTR=y
 CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_MEDIATEK=y
 CONFIG_CRYPTO_DRBG=y
 CONFIG_CRYPTO_DRBG_HMAC=y
 CONFIG_CRYPTO_DRBG_MENU=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
 CONFIG_CRYPTO_JITTERENTROPY=y
 CONFIG_CRYPTO_LZO=y
 CONFIG_CRYPTO_MANAGER=y
@@ -137,6 +147,7 @@ CONFIG_CRYPTO_NULL2=y
 CONFIG_CRYPTO_RNG=y
 CONFIG_CRYPTO_RNG2=y
 CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_RSA=y
 CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_SHA1=y
 CONFIG_CRYPTO_SHA256=y
@@ -161,7 +172,7 @@ CONFIG_DEBUG_UART_PHYS=0x11004000
 CONFIG_DEBUG_UART_VIRT=0xf1004000
 CONFIG_DEBUG_UNCOMPRESS=y
 # CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_MPTCP_PM="fullmesh"
+CONFIG_DEFAULT_NETLINK=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_ENGINE=y
 CONFIG_DMA_OF=y
@@ -209,7 +220,7 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_SYSFS=y
 # CONFIG_GPS is not set
 CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
+# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
@@ -222,6 +233,7 @@ CONFIG_HAVE_ARCH_PFN_VALID=y
 CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
 CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
 CONFIG_HAVE_ARM_ARCH_TIMER=y
 CONFIG_HAVE_ARM_SMCCC=y
 CONFIG_HAVE_CLK=y
@@ -238,6 +250,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_HAVE_GENERIC_GUP=y
 CONFIG_HAVE_IDE=y
 CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
 CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
@@ -250,19 +263,20 @@ CONFIG_HAVE_PERF_EVENTS=y
 CONFIG_HAVE_PERF_REGS=y
 CONFIG_HAVE_PERF_USER_STACK_DUMP=y
 CONFIG_HAVE_PROC_CPU=y
+CONFIG_HAVE_RCU_TABLE_FREE=y
 CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
 CONFIG_HAVE_RSEQ=y
 CONFIG_HAVE_SMP=y
 CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
 CONFIG_HAVE_UID16=y
 CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
 CONFIG_HOTPLUG_CPU=y
+# CONFIG_HUGETLBFS is not set
 CONFIG_HWMON=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_MTK=y
 CONFIG_HZ_FIXED=0
+CONFIG_HZ_PERIODIC=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
@@ -271,7 +285,11 @@ CONFIG_ICPLUS_PHY=y
 CONFIG_IIO=y
 # CONFIG_IIO_BUFFER is not set
 # CONFIG_IIO_TRIGGER is not set
-CONFIG_INITRAMFS_SOURCE=""
+CONFIG_INITRAMFS_COMPRESSION=""
+# CONFIG_INITRAMFS_FORCE is not set
+CONFIG_INITRAMFS_ROOT_GID=1000
+CONFIG_INITRAMFS_ROOT_UID=1000
+CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-arm_cortex-a7_musl-1.1.14_eabi/root-mediatek /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
 # CONFIG_IOMMU_DEBUGFS is not set
 # CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
 # CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
@@ -283,6 +301,9 @@ CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 CONFIG_JBD2=y
 CONFIG_KALLSYMS=y
+CONFIG_KEXEC=y
+CONFIG_KEXEC_CORE=y
+CONFIG_KEYS=y
 CONFIG_LEDS_MT6323=y
 CONFIG_LIBFDT=y
 CONFIG_LOCK_DEBUGGING_SUPPORT=y
@@ -294,7 +315,7 @@ CONFIG_LZO_DECOMPRESS=y
 # CONFIG_MACH_MT6589 is not set
 # CONFIG_MACH_MT6592 is not set
 CONFIG_MACH_MT7623=y
-# CONFIG_MACH_MT7629 is not set
+CONFIG_MACH_MT7629=y
 # CONFIG_MACH_MT8127 is not set
 # CONFIG_MACH_MT8135 is not set
 CONFIG_MAGIC_SYSRQ=y
@@ -319,6 +340,12 @@ CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MODULES_USE_ELF_REL=y
+CONFIG_MPILIB=y
+# CONFIG_MPTCP_BINDER is not set
+# CONFIG_MPTCP_FULLMESH is not set
+# CONFIG_MPTCP_NDIFFPORTS is not set
+# CONFIG_MPTCP_REDUNDANT is not set
+# CONFIG_MPTCP_ROUNDROBIN is not set
 # CONFIG_MT753X_GSW is not set
 CONFIG_MTD_BLOCK2MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -346,7 +373,7 @@ CONFIG_MTK_EFUSE=y
 CONFIG_MTK_INFRACFG=y
 # CONFIG_MTK_IOMMU is not set
 # CONFIG_MTK_IOMMU_V1 is not set
-CONFIG_MTK_PLATFORM=""
+CONFIG_MTK_PLATFORM="mt7623"
 CONFIG_MTK_PMIC_WRAP=y
 CONFIG_MTK_SCPSYS=y
 CONFIG_MTK_THERMAL=y
@@ -355,6 +382,7 @@ CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_NEED_DMA_MAP_STATE=y
 CONFIG_NEON=y
 CONFIG_NET_DSA=y
+CONFIG_NET_DSA_LEGACY=y
 CONFIG_NET_DSA_MT7530=y
 CONFIG_NET_DSA_TAG_MTK=y
 CONFIG_NET_FLOW_LIMIT=y
@@ -365,9 +393,6 @@ CONFIG_NET_VENDOR_MEDIATEK=y
 # CONFIG_NET_VENDOR_WIZNET is not set
 CONFIG_NLS=y
 CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
 CONFIG_NR_CPUS=4
 CONFIG_NVMEM=y
 CONFIG_OF=y
@@ -395,15 +420,18 @@ CONFIG_PCI_MSI=y
 CONFIG_PCI_MSI_IRQ_DOMAIN=y
 # CONFIG_PCI_V3_SEMI is not set
 CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
+CONFIG_PGTABLE_LEVELS=3
+CONFIG_PGTABLE_MAPPING=y
 CONFIG_PHYLIB=y
 CONFIG_PHYLINK=y
+CONFIG_PHYS_ADDR_T_64BIT=y
 CONFIG_PHY_MTK_TPHY=y
 # CONFIG_PHY_MTK_XSPHY is not set
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_MT2701=y
 CONFIG_PINCTRL_MT6397=y
 CONFIG_PINCTRL_MT7623=y
+CONFIG_PINCTRL_MT7629=y
 CONFIG_PINCTRL_MTK=y
 CONFIG_PINCTRL_MTK_MOORE=y
 CONFIG_PLUGIN_HOSTCC="g++"
@@ -472,6 +500,7 @@ CONFIG_SPI_MEM=y
 CONFIG_SPI_MT65XX=y
 # CONFIG_SPI_MTK_SNFI is not set
 CONFIG_SPMI=y
+# CONFIG_SPS30 is not set
 CONFIG_SRCU=y
 CONFIG_STREAM_PARSER=y
 # CONFIG_STRIP_ASM_SYMS is not set
@@ -481,6 +510,7 @@ CONFIG_SWCONFIG=y
 CONFIG_SWPHY=y
 CONFIG_SWP_EMULATE=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_SYS_SUPPORTS_HUGETLBFS=y
 CONFIG_TASKS_RCU=y
 # CONFIG_TCP_CONG_NANQINLANG is not set
 CONFIG_THERMAL=y
@@ -512,6 +542,8 @@ CONFIG_VFP=y
 CONFIG_VFPv3=y
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_WATCHDOG_CORE=y
+# CONFIG_WIRELESS is not set
+# CONFIG_WLAN is not set
 CONFIG_XPS=y
 CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
@@ -519,3 +551,5 @@ CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_ZBOOT_ROM_TEXT=0
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSMALLOC=y
+# CONFIG_ZSMALLOC_STAT is not set