diff --git a/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index 39278959..0de9f1b5 100755
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -56,6 +56,9 @@ pangu,l1000)
     ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_netdev "4g1" "4g1" "blue:4g1" "4g1"
+	ucidef_set_led_netdev "4g2" "4g2" "blue:4g2" "4g2"
+	ucidef_set_led_netdev "4g3" "4g3" "blue:4g3" "4g3"
     ;;
 netgear,ex6100v2 |\
 netgear,ex6150v2)
diff --git a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 08ce456e..370cefa1 100755
--- a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -247,15 +247,15 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
 		;;
+    pangu,l1000)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x5000 0x2f20
 		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
 		;;
-    pangu,l1000)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
-		;;
 	netgear,ex6100v2 |\
 	netgear,ex6150v2)
 		caldata_extract "ART" 0x5000 0x2f20
diff --git a/root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network b/root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network
new file mode 100755
index 00000000..02af8198
--- /dev/null
+++ b/root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network
@@ -0,0 +1,19 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=11
+STOP=98
+
+adjust_smp_affinity() {
+	test -f /lib/adjust_network.sh && {
+		. /lib/adjust_network.sh
+
+		adjust_eth_queue
+		adjust_edma_smp_affinity
+		adjust_radio_smp_affinity
+	}
+}
+
+boot() {
+	adjust_smp_affinity
+}
diff --git a/root/target/linux/ipq40xx/base-files/etc/init.d/set_smp_affinity b/root/target/linux/ipq40xx/base-files/etc/init.d/set_smp_affinity
deleted file mode 100755
index 4ce4bf4f..00000000
--- a/root/target/linux/ipq40xx/base-files/etc/init.d/set_smp_affinity
+++ /dev/null
@@ -1,205 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2011 OpenWrt.org
-
-START=99
-STOP=98
-
-rps_flow_cnt=4096
-core_count=$(grep -c processor /proc/cpuinfo)
-rps_sock_flow_ent=`expr $core_count \* $rps_flow_cnt`
-queue_cores="0 1 2"
-queue_irq_cores="1 2"
-wifi_core="3"
-usb_core="0"
-
-############### util functions ###############
-
-to_hex_list() {
-	local cores=$1
-	local converted=""
-	for core in $(echo $cores | awk '{print}')
-	do
-		local hex="$(gen_hex_mask "$core")"
-		converted="$converted $hex"
-	done
-	echo `echo $converted | sed 's/^ *//'`
-}
-
-gen_hex_mask() {
-	local cores=$1
-	local mask=0
-	for core in $(echo $cores | awk '{print}')
-	do
-		local bit="$((1 << $core))"
-		let "mask = mask + bit"
-	done
-	local hex="$(printf %x "$mask")"
-	echo "$hex"
-}
-
-val_at_index() {
-	local values=$1
-	local idx=$2
-	echo `echo $values | awk -v i=$idx '{print $i}'`
-}
-
-size_of_list() {
-	local list=$1
-	local spaces=`echo $list | grep -o ' ' | wc -l`
-	echo `expr $spaces + 1`
-}
-
-set_core_mask() {
-	local file=$1
-	local cores=$2
-	local mask="$(gen_hex_mask "$cores")"
-	echo $mask > $file
-}
-
-set_core_mask_round() {
-	local files=$1
-	local cores=$2
-	local step_size=$3
-	[ ! -n "$3" ] && step_size=1
-	
-	local core_count="$(size_of_list "$cores")"
-	local counter=0
-	local idx=1
-	local roof=`expr $core_count \* $step_size`
-	for file in $(echo $files | awk '{print}')
-	do
-		let "idx = counter / step_size + 1"
-		local core="$(val_at_index "$cores" $idx)"
-		set_core_mask $file $core
-		let "counter = counter + 1"
-		[ $counter -ge $roof ] && counter=0
-	done
-}
-
-############### assign network queues ###############
-
-set_interface_round() {
-	local interface=$1
-	local cores=$2
-	local step_size=$3
-	[ ! -n "$3" ] && step_size=1
-	
-	echo "using round mask for interface: $interface, step size: $step_size"
-	set_core_mask_round "$(ls /sys/class/net/$interface/queues/tx-*/xps_cpus)" "$cores" $step_size
-	set_core_mask_round "$(ls /sys/class/net/$interface/queues/rx-*/rps_cpus)" "$cores" $step_size
-	
-	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_flow_cnt
-	do
-		echo $rps_flow_cnt > $file
-	done
-}
-
-set_interface() {
-	local interface=$1
-	local cores=$2
-	
-	echo "using cores: $cores for interface: $interface"
-	
-	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_cpus
-	do
-		set_core_mask $file "$cores"
-		echo $rps_flow_cnt > `dirname $file`/rps_flow_cnt
-	done
-
-	for file in /sys/class/net/$interface/queues/tx-[0-9]*/xps_cpus
-	do
-		set_core_mask $file "$cores"
-	done
-}
-
-set_interface_queues() {
-	echo "using cpu: $queue_cores for network queues"
-	for dev in /sys/class/net/eth*
-	do
-		[ -d "$dev" ] || continue
-		
-		local interface=`basename $dev`
-		
-		set_interface $interface "$queue_cores"
-	done
-
-	for dev in /sys/class/net/wlan*
-	do
-		[ -d "$dev" ] || continue
-		
-		local interface=`basename $dev`
-		
-		set_interface $interface "$queue_cores"
-	done
-	
-	for dev in /sys/class/net/eth*
-	do
-		local eth=`basename $dev`
-		echo "enabling offload on $eth"
-		ethtool -K $eth rx-checksum on >/dev/null 2>&1
-		ethtool -K $eth tx-checksum-ip-generic on >/dev/null 2>&1 || (
-		ethtool -K $eth tx-checksum-ipv4 on >/dev/null 2>&1
-		ethtool -K $eth tx-checksum-ipv6 on >/dev/null 2>&1)
-		ethtool -K $eth tx-scatter-gather on >/dev/null 2>&1
-		ethtool -K $eth gso on >/dev/null 2>&1
-		ethtool -K $eth gro on >/dev/null 2>&1
-		ethtool -K $eth lro on >/dev/null 2>&1
-		ethtool -K $eth tso on >/dev/null 2>&1
-		ethtool -K $eth ufo on >/dev/null 2>&1
-	done
-	
-	echo $rps_sock_flow_ent > /proc/sys/net/core/rps_sock_flow_entries
-	sysctl -w net.core.rps_sock_flow_entries=$rps_sock_flow_ent
-}
-
-############### assign interrupts ###############
-set_irq_cores() {
-	local mask="$(gen_hex_mask "$2")"
-	echo "set mask $mask for irq: $1"
-	echo $mask > "/proc/irq/$1/smp_affinity"
-}
-
-set_irq_pattern() {
-	local name_pattern="$1"
-	local cores="$2"
-	
-	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
-	do
-		set_irq_cores $irq "$cores"
-	done
-}
-
-set_irq_interleave() {
-	local name_pattern=$1
-	local cores=$2
-	local step_size=$3
-	
-	local files=""
-	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
-	do
-		files="$files\
-		/proc/irq/$irq/smp_affinity"
-	done
-	
-	set_core_mask_round "$files" "$cores" "$step_size"
-}
-
-set_irqs() {
-	#dma
-	set_irq_pattern bam_dma "$usb_core"
-
-	#ethernet
-	set_irq_interleave eth_tx "$queue_irq_cores" 4
-	set_irq_interleave eth_rx "$queue_irq_cores" 1
-
-	#pcie
-	set_irq_pattern pcie "$wifi_core"
-
-	#usb
-	set_irq_pattern usb "$usb_core"
-}
-
-start() {
-	set_interface_queues
-	set_irqs
-}
diff --git a/root/target/linux/ipq40xx/base-files/lib/adjust_network.sh b/root/target/linux/ipq40xx/base-files/lib/adjust_network.sh
new file mode 100755
index 00000000..99423022
--- /dev/null
+++ b/root/target/linux/ipq40xx/base-files/lib/adjust_network.sh
@@ -0,0 +1,89 @@
+#!/bin/sh
+# this scripts is used for adjust cpu's choice of interrupts.
+#
+
+################################################
+# Adjust smp_affinity of edma
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    execute only once on start-up.
+################################################
+adjust_edma_smp_affinity() {
+	grep -q edma_eth_ /proc/interrupts || return 0
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local cpu=0
+	local tx_irq_num
+
+	for tx_num in `seq 0 1 15` ; do
+		cpu=`printf "%x" $((1<<((tx_num/4+0)%nr)))`
+		tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
+	done
+
+	for rx_num in `seq 0 1 7` ; do
+		cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
+		rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
+		[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
+	done
+}
+
+################################################
+# Adjust smp_affinity of ath10k for 2G and 5G
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    execute only once on start-up.
+################################################
+adjust_radio_smp_affinity() {
+	local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local idx=2
+
+	for irq in $irqs; do
+		cpu=`printf "%x" $((1<<((idx)%nr)))`
+		echo $cpu > /proc/irq/$irq/smp_affinity
+		idx=$((idx+1))
+	done
+}
+
+################################################
+# Adjust queue of eth
+# Globals:
+#    None
+# Arguments:
+#    None
+# Returns:
+#    None
+# Remark:
+#    Each network reboot needs to be executed.
+################################################
+adjust_eth_queue() {
+	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
+	local idx=0
+
+	for epath in /sys/class/net/eth[0-9]*; do
+		test -e $epath || break
+		echo $epath | grep -q "\." && continue
+		eth=`basename $epath`
+		idx=0
+		for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
+			test -e $exps || break
+			cpu=`printf "%x" $((1<<((idx+1)%nr)))`
+			idx=$((idx+1))
+			echo $cpu > $exps
+			echo 256 > `dirname $exps`/rps_flow_cnt
+		done
+		which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
+	done
+
+	echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
+}
diff --git a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
index a782706a..9a6059a9 100755
--- a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
+++ b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
@@ -11,7 +11,7 @@
 
 / {
 
-	model = "ANTROUTERGZ1000";
+	model = "GZ841902_55860.com";
 	compatible = "pangu,l1000", "qcom,ipq4019";
 
 
@@ -141,8 +141,20 @@
 			label = "bule:wan";
 			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
 		};     
+		4g1 {
+			label = "bule:4g1";
+			gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
+		};     
+		4g2 {
+			label = "bule:4g2";
+			gpios = <&tlmm 45 GPIO_ACTIVE_LOW>;
+		};     
+		4g3 {
+			label = "bule:4g3";
+			gpios = <&tlmm 46 GPIO_ACTIVE_LOW>;
+		};     
 	    usb {
-			label = "bule::usb";
+			label = "bule:usb";
 			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
 			trigger-sources = <&usb2>, <&usb3>;
 			linux,default-trigger = "usbport";
diff --git a/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index fe3cd88d..42faa353 100755
--- a/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,59 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,61 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
@@ -18,6 +18,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4018-ap120c-ac.dtb \
 +	qcom-ipq4018-dap-2610.dtb \
 +	qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
++	qcom-ipq4018-magic-2-wifi-next.dtb \
 +	qcom-ipq4018-ea6350v3.dtb \
 +	qcom-ipq4018-eap1300.dtb \
 +	qcom-ipq4018-ecw5211.dtb \
@@ -27,6 +28,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4018-ex6100v2.dtb \
 +	qcom-ipq4018-ex6150v2.dtb \
 +	qcom-ipq4018-fritzbox-4040.dtb \
++	qcom-ipq4018-gl-ap1300.dtb \
 +	qcom-ipq4018-jalapeno.dtb \
 +	qcom-ipq4018-meshpoint-one.dtb \
 +	qcom-ipq4018-nbg6617.dtb \
diff --git a/root/target/linux/ipq40xx/patches-5.4/999-ipq40xx-unlock-cpu-frequency.patch b/root/target/linux/ipq40xx/patches-5.4/999-ipq40xx-unlock-cpu-frequency.patch
old mode 100644
new mode 100755