mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00
Code Issues Releases Wiki Activity

Fix for BPI-R64

Browse source
This commit is contained in:
Ycarus (Yannick Chabanois) 2022-05-04 16:52:37 +02:00
parent eab67d3811
commit 78cbf848f8
195 changed files with 116008 additions and 80 deletions
Download patch file Download diff file Expand all files Collapse all files

350
root/target/linux/mediatek/dts/mt7622-buffalo-wsr-2533dhp2.dts Normal file
View file

@ -0,0 +1,350 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/dts-v1/;
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include "mt7622.dtsi"
#include "mt6380.dtsi"
/ {
model = "Buffalo WSR-2533DHP2";
compatible = "buffalo,wsr-2533dhp2", "mediatek,mt7622";
aliases {
serial0 = &uart0;
led-boot = &power_green;
led-failsafe = &power_amber;
led-running = &power_green;
led-upgrade = &power_green;
};
chosen {
bootargs = "earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8 swiotlb=512";
};
memory {
reg = <0 0x40000000 0 0x0F000000>;
};
leds {
compatible = "gpio-leds";
wireless_amber {
label = "amber:wireless";
gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
};
power_amber: power_amber {
label = "amber:power";
gpios = <&pio 3 GPIO_ACTIVE_LOW>;
};
power_green: power_green {
label = "green:power";
gpios = <&pio 4 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wireless_green {
label = "green:wireless";
gpios = <&pio 15 GPIO_ACTIVE_HIGH>;
};
internet {
label = "green:internet";
gpios = <&pio 19 GPIO_ACTIVE_HIGH>;
};
router {
label = "green:router";
gpios = <&pio 20 GPIO_ACTIVE_HIGH>;
};
};
keys {
compatible = "gpio-keys";
poll-interval = <100>;
reset {
label = "reset";
gpios = <&pio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
/* GPIO 1 and 16 are a tri-state switch button with
* ROUTER / AP / WB.
*/
router {
label = "router";
gpios = <&pio 1 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
bridge {
label = "wb";
gpios = <&pio 16 GPIO_ACTIVE_LOW>;
linux,code = <BTN_1>;
linux,input-type = <EV_SW>;
};
/* GPIO 18 is a switch button with AUTO / MANUAL. */
manual {
label = "manual";
gpios = <&pio 18 GPIO_ACTIVE_LOW>;
linux,code = <BTN_2>;
linux,input-type = <EV_SW>;
};
wps {
label = "wps";
gpios = <&pio 102 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
rtkgsw: rtkgsw@0 {
compatible = "mediatek,rtk-gsw";
mediatek,ethsys = <&ethsys>;
mediatek,mdio = <&mdio>;
mediatek,reset-pin = <&pio 54 GPIO_ACTIVE_HIGH>;
};
};
&cpu0 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
&cpu1 {
proc-supply = <&mt6380_vcpu_reg>;
sram-supply = <&mt6380_vm_reg>;
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pcie0_pins>;
status = "okay";
};
&slot0 {
status = "okay";
wifi@0,0 {
compatible = "mediatek,mt76";
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x5000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pio {
eth_pins: eth-pins {
mux {
function = "eth";
groups = "mdc_mdio", "rgmii_via_gmac2";
};
};
/* Parallel nand is shared pin with eMMC */
parallel_nand_pins: parallel-nand-pins {
mux {
function = "flash";
groups = "par_nand";
};
conf-cmd-dat {
pins = "NCEB", "NWEB", "NREB",
"NDL4", "NDL5", "NDL6",
"NDL7", "NRB", "NCLE",
"NALE", "NDL0", "NDL1",
"NDL2", "NDL3";
input-enable;
drive-strength = <8>;
bias-pull-up;
};
};
pcie0_pins: pcie0-pins {
mux {
function = "pcie";
groups = "pcie0_pad_perst",
"pcie0_1_waken",
"pcie0_1_clkreq";
};
};
pmic_bus_pins: pmic-bus-pins {
mux {
function = "pmic";
groups = "pmic_bus";
};
};
pwm7_pins: pwm1-2-pins {
mux {
function = "pwm";
groups = "pwm_ch7_2";
};
};
uart0_pins: uart0-pins {
mux {
function = "uart";
groups = "uart0_0_tx_rx" ;
};
};
watchdog_pins: watchdog-pins {
mux {
function = "watchdog";
groups = "watchdog";
};
};
};
&bch {
status = "okay";
};
&eth {
pinctrl-names = "default";
pinctrl-0 = <&eth_pins>;
status = "okay";
gmac0: mac@0 {
compatible = "mediatek,eth-mac";
reg = <0>;
phy-connection-type = "2500base-x";
nvmem-cells = <&macaddr_factory_4>;
nvmem-cell-names = "mac-address";
mac-address-increment = <(-1)>;
fixed-link {
speed = <2500>;
full-duplex;
pause;
};
};
mdio: mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
};
};
&nandc {
pinctrl-names = "default";
pinctrl-0 = <&parallel_nand_pins>;
status = "okay";
nand@0 {
reg = <0>;
nand-ecc-mode = "hw";
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Preloader";
reg = <0x0 0x80000>;
read-only;
};
partition@80000 {
label = "ATF";
reg = <0x80000 0x40000>;
read-only;
};
partition@c0000 {
label = "Bootloader";
reg = <0xc0000 0x80000>;
read-only;
};
partition@140000 {
label = "Config";
reg = <0x140000 0x80000>;
};
factory: partition@1c0000 {
label = "factory";
reg = <0x1c0000 0x40000>;
read-only;
};
partition@200000 {
compatible = "brcm,trx";
brcm,trx-magic = <0x32504844>;
label = "firmware";
reg = <0x200000 0x3a00000>;
};
partition@3C00000 {
label = "Kernel2";
reg = <0x3c00000 0x3a00000>;
};
partition@7600000 {
label = "glbcfg";
reg = <0x7600000 0x200000>;
read-only;
};
partition@7800000 {
label = "board_data";
reg = <0x7800000 0x200000>;
read-only;
};
};
};
};
&pwm {
pinctrl-names = "default";
pinctrl-0 = <&pwm7_pins>;
status = "okay";
};
&pwrap {
pinctrl-names = "default";
pinctrl-0 = <&pmic_bus_pins>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pins>;
status = "okay";
};
&watchdog {
pinctrl-names = "default";
pinctrl-0 = <&watchdog_pins>;
status = "okay";
};
&wmac {
status = "okay";
mediatek,mtd-eeprom = <&factory 0x0>;
};
&rtc {
status = "disabled";
};
&factory {
compatible = "nvmem-cells";
#address-cells = <1>;
#size-cells = <1>;
macaddr_factory_4: macaddr@4 {
reg = <0x4 0x6>;
};
};