diff --git a/root/target/linux/generic/config-5.15 b/root/target/linux/generic/config-5.15
index 055ec32e..cfaa61f2 100644
--- a/root/target/linux/generic/config-5.15
+++ b/root/target/linux/generic/config-5.15
@@ -5226,6 +5226,7 @@ CONFIG_SELECT_MEMORY_MODEL=y
 # CONFIG_SENSORS_DS620 is not set
 # CONFIG_SENSORS_EMC1403 is not set
 # CONFIG_SENSORS_EMC2103 is not set
+# CONFIG_SENSORS_EMC2305 is not set
 # CONFIG_SENSORS_EMC6W201 is not set
 # CONFIG_SENSORS_F71805F is not set
 # CONFIG_SENSORS_F71882FG is not set
diff --git a/root/target/linux/mvebu/patches-5.15/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch b/root/target/linux/mvebu/patches-5.15/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
deleted file mode 100644
index 2240d0b3..00000000
--- a/root/target/linux/mvebu/patches-5.15/314-arm64-dts-uDPU-switch-PHY-operation-mode-to-2500base.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-Certain SFP modules (most notably Nokia GPON ones) first check
-connectivity on 1000base-x, and switch to 2500base-x afterwards. This
-is considered a quirk so the phylink switches the interface to
-2500base-x as well.
-
-However, after power-cycling the uDPU device, network interface/SFP module
-will not work correctly until the module is re-seated. This patch
-resolves this issue by forcing the interface to be brought up in
-2500base-x mode by default.
-
-Signed-off-by: Jakov Petrina <jakov.petrina@sartura.hr>
-Signed-off-by: Vladimir Vid <vladimir.vid@sartura.hr>
-Cc: Luka Perkov <luka.perkov@sartura.hr>
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
-@@ -162,7 +162,7 @@
- };
- 
- &eth0 {
--	phy-mode = "sgmii";
-+	phy-mode = "2500base-x";
- 	status = "okay";
- 	managed = "in-band-status";
- 	phys = <&comphy1 0>;
-@@ -170,7 +170,7 @@
- };
- 
- &eth1 {
--	phy-mode = "sgmii";
-+	phy-mode = "2500base-x";
- 	status = "okay";
- 	managed = "in-band-status";
- 	phys = <&comphy0 1>;