Add kernel 6.10 patches for filogic

6.10/target/linux/mediatek/files-6.10/drivers/net/phy/mediatek-2p5ge.c

@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/firmware.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/phy.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+
+#define MT7988_2P5GE_PMB "mediatek/mt7988/i2p5ge-phy-pmb.bin"
+
+#define MD32_EN					BIT(0)
+#define PMEM_PRIORITY				BIT(8)
+#define DMEM_PRIORITY				BIT(16)
+
+#define BASE100T_STATUS_EXTEND			0x10
+#define BASE1000T_STATUS_EXTEND			0x11
+#define EXTEND_CTRL_AND_STATUS			0x16
+
+#define PHY_AUX_CTRL_STATUS			0x1d
+#define   PHY_AUX_DPX_MASK			GENMASK(5, 5)
+#define   PHY_AUX_SPEED_MASK			GENMASK(4, 2)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_LINK_STATUS_MISC		0xa2
+#define   MTK_PHY_FDX_ENABLE			BIT(5)
+
+#define MTK_PHY_LPI_PCS_DSP_CTRL		0x121
+#define   MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK	GENMASK(12, 8)
+
+/* Registers on MDIO_MMD_VEND2 */
+#define MTK_PHY_LED0_ON_CTRL			0x24
+#define   MTK_PHY_LED0_ON_LINK1000		BIT(0)
+#define   MTK_PHY_LED0_ON_LINK100		BIT(1)
+#define   MTK_PHY_LED0_ON_LINK10		BIT(2)
+#define   MTK_PHY_LED0_ON_LINK2500		BIT(7)
+#define   MTK_PHY_LED0_POLARITY			BIT(14)
+
+#define MTK_PHY_LED1_ON_CTRL			0x26
+#define   MTK_PHY_LED1_ON_FDX			BIT(4)
+#define   MTK_PHY_LED1_ON_HDX			BIT(5)
+#define   MTK_PHY_LED1_POLARITY			BIT(14)
+
+#define MTK_EXT_PAGE_ACCESS			0x1f
+#define MTK_PHY_PAGE_STANDARD			0x0000
+#define MTK_PHY_PAGE_EXTENDED_52B5		0x52b5
+
+struct mtk_i2p5ge_phy_priv {
+	bool fw_loaded;
+};
+
+enum {
+	PHY_AUX_SPD_10 = 0,
+	PHY_AUX_SPD_100,
+	PHY_AUX_SPD_1000,
+	PHY_AUX_SPD_2500,
+};
+
+static int mtk_2p5ge_phy_read_page(struct phy_device *phydev)
+{
+	return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+
+static int mtk_2p5ge_phy_write_page(struct phy_device *phydev, int page)
+{
+	return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+
+static int mt7988_2p5ge_phy_probe(struct phy_device *phydev)
+{
+	struct mtk_i2p5ge_phy_priv *phy_priv;
+
+	phy_priv = devm_kzalloc(&phydev->mdio.dev,
+				sizeof(struct mtk_i2p5ge_phy_priv), GFP_KERNEL);
+	if (!phy_priv)
+		return -ENOMEM;
+
+	phydev->priv = phy_priv;
+
+	return 0;
+}
+
+static int mt7988_2p5ge_phy_config_init(struct phy_device *phydev)
+{
+	int ret, i;
+	const struct firmware *fw;
+	struct device *dev = &phydev->mdio.dev;
+	struct device_node *np;
+	void __iomem *pmb_addr;
+	void __iomem *md32_en_cfg_base;
+	struct mtk_i2p5ge_phy_priv *phy_priv = phydev->priv;
+	u16 reg;
+	struct pinctrl *pinctrl;
+
+	if (!phy_priv->fw_loaded) {
+		np = of_find_compatible_node(NULL, NULL, "mediatek,2p5gphy-fw");
+		if (!np)
+			return -ENOENT;
+		pmb_addr = of_iomap(np, 0);
+		if (!pmb_addr)
+			return -ENOMEM;
+		md32_en_cfg_base = of_iomap(np, 1);
+		if (!md32_en_cfg_base)
+			return -ENOMEM;
+
+		ret = request_firmware(&fw, MT7988_2P5GE_PMB, dev);
+		if (ret) {
+			dev_err(dev, "failed to load firmware: %s, ret: %d\n",
+				MT7988_2P5GE_PMB, ret);
+			return ret;
+		}
+
+		reg = readw(md32_en_cfg_base);
+		if (reg & MD32_EN) {
+			phy_set_bits(phydev, 0, BIT(15));
+			usleep_range(10000, 11000);
+		}
+		phy_set_bits(phydev, 0, BIT(11));
+
+		/* Write magic number to safely stall MCU */
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800e, 0x1100);
+		phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x800f, 0x00df);
+
+		for (i = 0; i < fw->size - 1; i += 4)
+			writel(*((uint32_t *)(fw->data + i)), pmb_addr + i);
+		release_firmware(fw);
+
+		writew(reg & ~MD32_EN, md32_en_cfg_base);
+		writew(reg | MD32_EN, md32_en_cfg_base);
+		phy_set_bits(phydev, 0, BIT(15));
+		dev_info(dev, "Firmware loading/trigger ok.\n");
+
+		phy_priv->fw_loaded = true;
+	}
+
+	/* Setup LED */
+
+	/* Set polarity of led0 to active-high for BPI-R4 */
+	phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+			 MTK_PHY_LED0_POLARITY);
+
+	phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL,
+			 MTK_PHY_LED0_ON_LINK10 |
+			 MTK_PHY_LED0_ON_LINK100 |
+			 MTK_PHY_LED0_ON_LINK1000 |
+			 MTK_PHY_LED0_ON_LINK2500);
+	phy_set_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED1_ON_CTRL,
+			 MTK_PHY_LED1_ON_FDX | MTK_PHY_LED1_ON_HDX);
+
+	pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "i2p5gbe-led");
+	if (IS_ERR(pinctrl)) {
+		dev_err(&phydev->mdio.dev, "Fail to set LED pins!\n");
+		return PTR_ERR(pinctrl);
+	}
+
+	phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LPI_PCS_DSP_CTRL,
+		       MTK_PHY_LPI_SIG_EN_LO_THRESH100_MASK, 0);
+
+	/* Enable 16-bit next page exchange bit if 1000-BT isn't advertizing */
+	phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+	__phy_write(phydev, 0x11, 0xfbfa);
+	__phy_write(phydev, 0x12, 0xc3);
+	__phy_write(phydev, 0x10, 0x87f8);
+	phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+	return 0;
+}
+
+static int mt7988_2p5ge_phy_config_aneg(struct phy_device *phydev)
+{
+	bool changed = false;
+	u32 adv;
+	int ret;
+
+	if (phydev->autoneg == AUTONEG_DISABLE) {
+		/* Configure half duplex with genphy_setup_forced,
+		 * because genphy_c45_pma_setup_forced does not support.
+		 */
+		return phydev->duplex != DUPLEX_FULL
+			? genphy_setup_forced(phydev)
+			: genphy_c45_pma_setup_forced(phydev);
+	}
+
+	ret = genphy_c45_an_config_aneg(phydev);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	adv = linkmode_adv_to_mii_ctrl1000_t(phydev->advertising);
+	ret = phy_modify_changed(phydev, MII_CTRL1000,
+				 ADVERTISE_1000FULL | ADVERTISE_1000HALF,
+				 adv);
+	if (ret < 0)
+		return ret;
+	if (ret > 0)
+		changed = true;
+
+	return genphy_c45_check_and_restart_aneg(phydev, changed);
+}
+
+static int mt7988_2p5ge_phy_get_features(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_read_abilities(phydev);
+	if (ret)
+		return ret;
+
+	/* We don't support HDX at MAC layer on mt7988.
+	 * So mask phy's HDX capabilities, too.
+	 */
+	linkmode_set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
+			 phydev->supported);
+	linkmode_set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, phydev->supported);
+
+	return 0;
+}
+
+static int mt7988_2p5ge_phy_read_status(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = genphy_update_link(phydev);
+	if (ret)
+		return ret;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+		ret = genphy_c45_read_lpa(phydev);
+		if (ret < 0)
+			return ret;
+
+		/* Read the link partner's 1G advertisement */
+		ret = phy_read(phydev, MII_STAT1000);
+		if (ret < 0)
+			return ret;
+		mii_stat1000_mod_linkmode_lpa_t(phydev->lp_advertising, ret);
+	} else if (phydev->autoneg == AUTONEG_DISABLE) {
+		linkmode_zero(phydev->lp_advertising);
+	}
+
+	ret = phy_read(phydev, PHY_AUX_CTRL_STATUS);
+	if (ret < 0)
+		return ret;
+
+	switch (FIELD_GET(PHY_AUX_SPEED_MASK, ret)) {
+	case PHY_AUX_SPD_10:
+		phydev->speed = SPEED_10;
+		break;
+	case PHY_AUX_SPD_100:
+		phydev->speed = SPEED_100;
+		break;
+	case PHY_AUX_SPD_1000:
+		phydev->speed = SPEED_1000;
+		break;
+	case PHY_AUX_SPD_2500:
+		phydev->speed = SPEED_2500;
+		break;
+	}
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LINK_STATUS_MISC);
+	if (ret < 0)
+		return ret;
+
+	phydev->duplex = (ret & MTK_PHY_FDX_ENABLE) ? DUPLEX_FULL : DUPLEX_HALF;
+	/* FIXME: The current firmware always enables rate adaptation mode. */
+	phydev->rate_matching = RATE_MATCH_PAUSE;
+
+	return 0;
+}
+
+static int mt7988_2p5ge_phy_get_rate_matching(struct phy_device *phydev,
+					      phy_interface_t iface)
+{
+	return RATE_MATCH_PAUSE;
+}
+
+static struct phy_driver mtk_gephy_driver[] = {
+	{
+		PHY_ID_MATCH_MODEL(0x00339c11),
+		.name		= "MediaTek MT798x 2.5GbE PHY",
+		.probe		= mt7988_2p5ge_phy_probe,
+		.config_init	= mt7988_2p5ge_phy_config_init,
+		.config_aneg    = mt7988_2p5ge_phy_config_aneg,
+		.get_features	= mt7988_2p5ge_phy_get_features,
+		.read_status	= mt7988_2p5ge_phy_read_status,
+		.get_rate_matching	= mt7988_2p5ge_phy_get_rate_matching,
+		.suspend	= genphy_suspend,
+		.resume		= genphy_resume,
+		.read_page	= mtk_2p5ge_phy_read_page,
+		.write_page	= mtk_2p5ge_phy_write_page,
+	},
+};
+
+module_phy_driver(mtk_gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_2p5ge_phy_tbl[] = {
+	{ PHY_ID_MATCH_VENDOR(0x00339c00) },
+	{ }
+};
+
+MODULE_DESCRIPTION("MediaTek 2.5Gb Ethernet PHY driver");
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_2p5ge_phy_tbl);
+MODULE_FIRMWARE(MT7988_2P5GE_PMB);