Update rockchip 5.15 patches

root/target/linux/rockchip/patches-5.15/103-arm64-rockchip-add-OF-node-for-USB-eth-on-NanoPi-R2S.patch

@@ -10,19 +10,14 @@ register to match the blink behavior of the other port on the device.
 Signed-off-by: David Bauer <mail@david-bauer.net>
 ---
  arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts | 7 +++++++
- 1 file changed, 7 insertions(+)
+ 1 file changed, 1 insertions(+)
 
 --- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
 +++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
-@@ -403,4 +403,11 @@
- &usbdrd_dwc3 {
- 	dr_mode = "host";
- 	status = "okay";
-+
-+	usb-eth@2 {
-+		compatible = "realtek,rtl8153";
-+		reg = <2>;
-+
+@@ -404,6 +404,7 @@
+ 	rtl8153: device@2 {
+ 		compatible = "usbbda,8153";
+ 		reg = <2>;
 +		realtek,led-data = <0x87>;
-+	};
+ 	};
  };

root/target/linux/rockchip/patches-5.15/105-nanopi-r4s-sd-signalling.patch

@@ -0,0 +1,26 @@
+From: David Bauer <mail@david-bauer.net>
+Subject: arm64: dts: rockchip: disable UHS modes for NanoPi R4S
+
+The NanoPi R4S leaves the SD card in 1.8V signalling when rebooting
+while U-Boot requires the card to be in 3.3V mode.
+
+Remove UHS support from the SD controller so the card remains in 3.3V
+mode. This reduces transfer speeds but ensures a reboot whether from
+userspace or following a kernel panic is always working.
+
+Signed-off-by: David Bauer <mail@david-bauer.net>
+
+--- a/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
++++ b/arch/arm64/boot/dts/rockchip/rk3399-nanopi-r4s.dts
+@@ -121,6 +121,11 @@
+ 	status = "disabled";
+ };
+ 
++&sdmmc {
++	/delete-property/ sd-uhs-sdr104;
++	cap-sd-highspeed;
++};
++
+ &u2phy0_host {
+ 	phy-supply = <&vdd_5v>;
+ };