update 4019

root/target/linux/ipq40xx/base-files/etc/board.d/01_leds

@@ -45,6 +45,14 @@ engenius,ens620ext)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
 	;;
+mikrotik,sxtsq-5-ac)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
+	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
+	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
+	;;
 mobipromo,cm520-79f)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"

root/target/linux/ipq40xx/base-files/etc/board.d/02_network

@@ -17,6 +17,7 @@ ipq40xx_setup_interfaces()
 	engenius,emr3500|\
 	engenius,ens620ext|\
 	luma,wrtq-329acn|\
+	netgear,wac510|\
 	plasmacloud,pa1200|\
 	plasmacloud,pa2200)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -28,6 +29,7 @@ ipq40xx_setup_interfaces()
 	engenius,eap1300|\
 	engenius,emd1|\
 	meraki,mr33|\
+	mikrotik,sxtsq-5-ac|\
 	netgear,ex6100v2|\
 	netgear,ex6150v2|\
 	zyxel,wre6606)
@@ -47,6 +49,7 @@ ipq40xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	asus,rt-ac58u|\
+	mikrotik,hap-ac2|\
 	zyxel,nbg6617)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
@@ -63,7 +66,7 @@ ipq40xx_setup_interfaces()
 		;;
 	avm,fritzbox-7530)
 		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
 		;;
 	avm,fritzrepeater-3000)
 		ucidef_add_switch "switch0" \
@@ -104,6 +107,14 @@ ipq40xx_setup_interfaces()
 			"0u@eth0" "3:lan:2" "4:lan:1"
 		ucidef_set_interface_wan "eth1"
 		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan" "3:lan" "4:lan"
+		ucidef_set_interface_wan "eth1"
+		;;
 	qxwlan,e2600ac-c1 |\
 	qxwlan,e2600ac-c2)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -179,6 +190,15 @@ ipq40xx_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
+	mikrotik,hap-ac2)
+		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		lan_mac=$(macaddr_add $wan_mac 1)
+		label_mac="$wan_mac"
+		;;
+	mikrotik,sxtsq-5-ac)
+		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		label_mac="$lan_mac"
+		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac

root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches

@@ -1,3 +1,4 @@
+
 . /lib/functions/uci-defaults.sh
 
 board_config_update