diff --git a/6.1/target/linux/ipq40xx/config-6.1 b/6.1/target/linux/ipq40xx/config-6.1
index c758aeed..38fc0569 100644
--- a/6.1/target/linux/ipq40xx/config-6.1
+++ b/6.1/target/linux/ipq40xx/config-6.1
@@ -8,12 +8,16 @@ CONFIG_ARCH_IPQ40XX=y
 CONFIG_ARCH_KEEP_MEMBLOCK=y
 # CONFIG_ARCH_MDM9615 is not set
 CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MOXART is not set
 # CONFIG_ARCH_MSM8909 is not set
 # CONFIG_ARCH_MSM8916 is not set
 # CONFIG_ARCH_MSM8960 is not set
 # CONFIG_ARCH_MSM8974 is not set
 # CONFIG_ARCH_MSM8X60 is not set
 CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V4=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_NR_GPIO=0
@@ -64,11 +68,13 @@ CONFIG_CPUFREQ_DT_PLATDEV=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
@@ -356,6 +362,7 @@ CONFIG_PHY_QCOM_IPQ4019_USB=y
 # CONFIG_PHY_QCOM_USB_HS_28NM is not set
 # CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
 # CONFIG_PHY_QCOM_USB_SS is not set
+CONFIG_PHYS_OFFSET=0
 CONFIG_PINCTRL=y
 # CONFIG_PINCTRL_APQ8064 is not set
 # CONFIG_PINCTRL_APQ8084 is not set
@@ -525,8 +532,8 @@ CONFIG_XPS=y
 CONFIG_XXHASH=y
 CONFIG_XZ_DEC_ARM=y
 CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZSTD_COMPRESS=y
diff --git a/6.1/target/linux/ipq40xx/image/generic.mk b/6.1/target/linux/ipq40xx/image/generic.mk
new file mode 100644
index 00000000..45ada9d0
--- /dev/null
+++ b/6.1/target/linux/ipq40xx/image/generic.mk
@@ -0,0 +1,1206 @@
+
+DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
+DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
+DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
+
+define Device/FitImage
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL_NAME := Image
+endef
+
+define Device/FitImageLzma
+	KERNEL_SUFFIX := -uImage.itb
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL_NAME := Image
+endef
+
+define Device/FitzImage
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL_NAME := zImage
+endef
+
+define Device/UbiFit
+	KERNEL_IN_UBI := 1
+	IMAGES := factory.ubi sysupgrade.bin
+	IMAGE/factory.ubi := append-ubi
+	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+endef
+
+define Device/DniImage
+	$(call Device/FitzImage)
+	NETGEAR_BOARD_ID :=
+	NETGEAR_HW_ID :=
+	IMAGES += factory.img
+	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
+	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
+		append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+
+define Build/append-rootfshdr
+	mkimage -A $(LINUX_KARCH) \
+		-O linux -T filesystem \
+		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
+		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
+	cat $(IMAGE_KERNEL) > $@.$1
+	dd if=$@.new bs=64 count=1 >> $@.$1
+endef
+
+define Build/append-rutx-metadata
+	echo \
+		'{ \
+			"device_code": [".*"], \
+			"hwver": [".*"], \
+			"batch": [".*"], \
+			"serial": [".*"], \
+			"supported_devices":["teltonika,rutx"] \
+		}' | fwtool -I - $@
+endef
+
+define Build/copy-file
+	cat "$(1)" > "$@"
+endef
+
+define Build/mkmylofw_32m
+	$(eval device_id=$(word 1,$(1)))
+	$(eval revision=$(word 2,$(1)))
+
+	let \
+		size="$$(stat -c%s $@)" \
+		pad="$(subst k,* 1024,$(BLOCKSIZE))" \
+		pad="(pad - (size % pad)) % pad" \
+		newsize='size + pad'; \
+		$(STAGING_DIR_HOST)/bin/mkmylofw \
+		-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
+		-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
+		$@.new
+	@mv $@.new $@
+endef
+
+define Build/wac5xx-netgear-tar
+	mkdir $@.tmp
+	mv $@ $@.tmp/wac5xx-ubifs-root.img
+	md5sum $@.tmp/wac5xx-ubifs-root.img > $@.tmp/wac5xx-ubifs-root.md5sum
+	echo "WAC505 WAC510" > $@.tmp/metadata.txt
+	echo "WAC505_V9.9.9.9" > $@.tmp/version
+	tar -C $@.tmp/ -cf $@ .
+	rm -rf $@.tmp
+endef
+
+define Build/qsdk-ipq-factory-nand-askey
+	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
+		askey_kernel $@.$1 \
+		askey_fs $(IMAGE_ROOTFS) \
+		ubifs $@
+	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
+	@mv $@.new $@
+endef
+
+define Build/qsdk-ipq-app-gpt
+	cp $@ $@.tmp 2>/dev/null || true
+	ptgen -g -o $@.tmp -a 1 -l 1024 \
+			-t 0x2e -N 0:HLOS -r -p 32M \
+			-t 0x83 -N rootfs -r -p 128M \
+				-N rootfs_data -p 512M
+	cat $@.tmp >> $@
+	rm $@.tmp
+endef
+
+define Build/SenaoFW
+	-$(STAGING_DIR_HOST)/bin/mksenaofw \
+		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
+		-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
+		-e $@ \
+		-o $@.new
+	@cp $@.new $@
+endef
+
+define Build/wrgg-image
+	mkwrggimg -i $@ \
+	-o $@.new \
+	-d "$(WRGG_DEVNAME)" \
+	-s "$(WRGG_SIGNATURE)" \
+	-v "" -m "" -B ""
+	mv $@.new $@
+endef
+
+define Device/8dev_habanero-dvk
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := 8devices
+	DEVICE_MODEL := Habanero DVK
+	IMAGE_SIZE := 30976k
+	SOC := qcom-ipq4019
+	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += 8dev_habanero-dvk
+
+define Device/8dev_jalapeno-common
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	SOC := qcom-ipq4018
+endef
+
+define Device/8dev_jalapeno
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_VENDOR := 8devices
+	DEVICE_MODEL := Jalapeno
+endef
+TARGET_DEVICES += 8dev_jalapeno
+
+define Device/alfa-network_ap120c-ac
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := ALFA Network
+	DEVICE_MODEL := AP120C-AC
+	SOC := qcom-ipq4018
+	DEVICE_PACKAGES := kmod-usb-acm kmod-tpm-i2c-atmel
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 65536k
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += alfa-network_ap120c-ac
+
+define Device/aruba_glenmorangie
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Aruba
+	SOC := qcom-ipq4029
+endef
+
+define Device/aruba_ap-303
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-303
+endef
+TARGET_DEVICES += aruba_ap-303
+
+define Device/aruba_ap-303h
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-303H
+endef
+TARGET_DEVICES += aruba_ap-303h
+
+define Device/aruba_ap-365
+	$(call Device/aruba_glenmorangie)
+	DEVICE_MODEL := AP-365
+	DEVICE_PACKAGES := kmod-hwmon-ad7418
+endef
+TARGET_DEVICES += aruba_ap-365
+
+define Device/asus_map-ac2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := Lyra (MAP-AC2200)
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
+endef
+TARGET_DEVICES += asus_map-ac2200
+
+# WARNING: this is an initramfs image that gets you half of the way there
+#          you need to delete the jffs2 ubi volume and sysupgrade to the final image
+# to get a "trx" you can flash via web UI for ac42u/ac58u:
+# - change call Device/FitImageLzma to Device/FitImage
+# - add the following below UIMAGE_NAME
+#   UIMAGE_MAGIC := 0x27051956
+#   IMAGES += factory.trx
+#   IMAGE/factory.trx := copy-file $(KDIR)/tmp/$$(KERNEL_INITRAMFS_IMAGE) | uImage none
+define Device/asus_rt-ac42u
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := RT-AC42U
+	DEVICE_ALT0_VENDOR := ASUS
+	DEVICE_ALT0_MODEL := RT-ACRH17
+	DEVICE_ALT1_VENDOR := ASUS
+	DEVICE_ALT1_MODEL := RT-AC2200
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+#	RT-AC82U is nowhere to be found online
+#	Rather, this device is a/k/a RT-AC42U
+#	But we'll go with what the vendor firmware has...
+	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC82U')
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac42u
+
+define Device/asus_rt-ac58u
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ASUS
+	DEVICE_MODEL := RT-AC58U
+	DEVICE_ALT0_VENDOR := ASUS
+	DEVICE_ALT0_MODEL := RT-ACRH13
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 20439364
+	FILESYSTEMS := squashfs
+#	Someone - in their infinite wisdom - decided to put the firmware
+#	version in front of the image name \03\00\00\04 => Version 3.0.0.4
+#	Since u-boot works with strings we either need another fixup step
+#	to add a version... or we are very careful not to add '\0' into that
+#	string and call it a day.... Yeah, we do the latter!
+	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
+		kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += asus_rt-ac58u
+
+define Device/avm_fritzbox-4040
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 4040
+	SOC := qcom-ipq4018
+	BOARD_NAME := fritz4040
+	IMAGE_SIZE := 29056k
+	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
+	UBOOT_PARTITION_SIZE := 524288
+	IMAGES += eva.bin
+	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+	DEVICE_PACKAGES := fritz-tffs fritz-caldata
+endef
+TARGET_DEVICES += avm_fritzbox-4040
+
+define Device/avm_fritzbox-7530
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Box 7530
+	DEVICE_ALT0_VENDOR := AVM
+	DEVICE_ALT0_MODEL := FRITZ!Box 7520
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ltq-vdsl-vr11-app
+endef
+TARGET_DEVICES += avm_fritzbox-7530
+
+define Device/avm_fritzrepeater-1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 1200
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
+endef
+TARGET_DEVICES += avm_fritzrepeater-1200
+
+define Device/avm_fritzrepeater-3000
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := AVM
+	DEVICE_MODEL := FRITZ!Repeater 3000
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
+endef
+TARGET_DEVICES += avm_fritzrepeater-3000
+
+define Device/buffalo_wtr-m2133hp
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Buffalo
+	DEVICE_MODEL := WTR-M2133HP
+	SOC := qcom-ipq4019
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += buffalo_wtr-m2133hp
+
+define Device/cellc_rtl30vw
+	KERNEL_SUFFIX := -zImage.itb
+	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
+	KERNEL = kernel-bin | fit none $$(KDIR)/image-$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
+	KERNEL_NAME := zImage
+	KERNEL_IN_UBI :=
+	IMAGES := factory.bin sysupgrade.bin
+	IMAGE/factory.bin := append-rootfshdr kernel | append-ubi | qsdk-ipq-factory-nand-askey kernel
+	IMAGE/sysupgrade.bin := append-rootfshdr kernel | sysupgrade-tar kernel=$$$$@.kernel | append-metadata
+	DEVICE_VENDOR := Cell C
+	DEVICE_MODEL := RTL30VW
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 57344k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += cellc_rtl30vw
+
+define Device/cilab_meshpoint-one
+	$(call Device/8dev_jalapeno-common)
+	DEVICE_VENDOR := Crisis Innovation Lab
+	DEVICE_MODEL := MeshPoint.One
+	DEVICE_PACKAGES += kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += cilab_meshpoint-one
+
+define Device/compex_wpj419
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ419
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@12
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += compex_wpj419
+
+define Device/compex_wpj428
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Compex
+	DEVICE_MODEL := WPJ428
+	SOC := qcom-ipq4028
+	DEVICE_DTS_CONFIG := config@4
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 31232k
+	KERNEL_SIZE := 4096k
+	IMAGES += cpximg-6a04.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
+	DEVICE_PACKAGES := kmod-gpio-beeper
+	DEFAULT := n
+endef
+TARGET_DEVICES += compex_wpj428
+
+define Device/devolo_magic-2-wifi-next
+	$(call Device/FitImage)
+	DEVICE_VENDOR := devolo
+	DEVICE_MODEL := Magic 2 WiFi next
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+
+	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
+	# it will bootm it, just like we want for the initramfs.
+	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to 64k |\
+		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
+
+	IMAGE_SIZE := 26624k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += devolo_magic-2-wifi-next
+
+define Device/dlink_dap-2610
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := D-Link
+	DEVICE_MODEL := DAP-2610
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+	BLOCKSIZE := 64k
+	WRGG_DEVNAME := /dev/mtdblock/8
+	WRGG_SIGNATURE := wapac30_dkbs_dap2610
+	IMAGE_SIZE := 14080k
+	IMAGES += factory.bin
+	# Bootloader expects a special 160 byte header which is added by
+	# wrgg-image.
+	# Factory image size must be larger than 6MB, and size in wrgg header must
+	# match actual factory image size to be flashable from D-Link http server.
+	# Bootloader verifies checksum of wrgg image before booting, thus jffs2
+	# cannot be part of the wrgg image. This is solved in the factory image by
+	# having the rootfs at the end of the image (without pad-rootfs). And in
+	# the sysupgrade image only the kernel is included in the wrgg checksum,
+	# but this is not flashable from the D-link http server.
+	# append-rootfs must start on an erase block boundary.
+	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
+	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += dlink_dap-2610
+
+define Device/edgecore_ecw5211
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := ECW5211
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm
+endef
+TARGET_DEVICES += edgecore_ecw5211
+
+define Device/edgecore_oap100
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Edgecore
+	DEVICE_MODEL := OAP100
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGES := sysupgrade.bin
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	DEVICE_PACKAGES := kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += edgecore_oap100
+
+define Device/engenius_eap1300
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EAP1300
+	DEVICE_DTS_CONFIG := config@4
+	BOARD_NAME := eap1300
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 25344k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap1300
+
+define Device/engenius_eap2200
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EAP2200
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_eap2200
+
+define Device/engenius_emd1
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EMD1
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	IMAGE_SIZE := 30720k
+	IMAGES += factory.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emd1
+
+define Device/engenius_emr3500
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := EMR3500
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 30720k
+	IMAGES += factory.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
+	DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_emr3500
+
+define Device/engenius_ens620ext
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EnGenius
+	DEVICE_MODEL := ENS620EXT
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@4
+	BLOCKSIZE := 64k
+	PAGESIZE := 256
+	BOARD_NAME := ENS620EXT
+	VENDOR_ID := 0x0101
+	PRODUCT_ID := 0x79
+	PRODUCT_ID_NEW := 0xA4
+	DATECODE := 190507
+	FW_VER := 3.1.2
+	FW_VER_NEW := 3.5.6
+	CW_VER := 1.8.99
+	IMAGE_SIZE := 21312k
+	KERNEL_SIZE := 5120k
+	FILESYSTEMS := squashfs
+	IMAGES += factory_30.bin factory_35.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
+	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += engenius_ens620ext
+
+define Device/extreme-networks_ws-ap3915i
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Extreme Networks
+	DEVICE_MODEL := WS-AP3915i
+	IMAGE_SIZE := 30080k
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3915i
+
+define Device/ezviz_cs-w3-wd1200g-eup
+	$(call Device/FitImage)
+	DEVICE_VENDOR := EZVIZ
+	DEVICE_MODEL := CS-W3-WD1200G
+	DEVICE_VARIANT := EUP
+	IMAGE_SIZE := 14848k
+	KERNEL_SIZE = 6m
+	SOC := qcom-ipq4018
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
+		append-metadata
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+	DEVICE_COMPAT_VERSION := 2.0
+	DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \
+		Upgrade via sysupgrade mechanism is not possible.
+endef
+TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+
+define Device/glinet_gl-a1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-A1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+endef
+TARGET_DEVICES += glinet_gl-a1300
+
+define Device/glinet_gl-ap1300
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-AP1300
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGE_SIZE := 131072k
+	KERNEL_INSTALL := 1
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+TARGET_DEVICES += glinet_gl-ap1300
+
+define Device/glinet_gl-b1300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B1300
+	BOARD_NAME := gl-b1300
+	SOC := qcom-ipq4029
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-b1300
+
+define Device/glinet_gl-b2200
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B2200
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c3
+	KERNEL_INITRAMFS_SUFFIX := -recovery.itb
+	IMAGES := emmc.img.gz sysupgrade.bin
+	IMAGE/emmc.img.gz := qsdk-ipq-app-gpt |\
+		pad-to 1024k | append-kernel |\
+		pad-to 33792k | append-rootfs |\
+		append-metadata | gzip
+	IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct \
+		kmod-fs-ext4 kmod-mmc kmod-spi-dev mkf2fs e2fsprogs kmod-fs-f2fs
+endef
+TARGET_DEVICES += glinet_gl-b2200
+
+define Device/glinet_gl-s1300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-S1300
+	SOC := qcom-ipq4029
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	IMAGES := sysupgrade.bin
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := kmod-fs-ext4 kmod-mmc kmod-spi-dev
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += glinet_gl-s1300
+
+define Device/kernel-size-6350-8300
+	DEVICE_COMPAT_VERSION := 2.0
+	DEVICE_COMPAT_MESSAGE := Kernel partition size must be increased for \
+	this OpenWrt version. Before continuing, you MUST issue either the \
+	command "fw_setenv kernsize 500000" from the OpenWrt command line, \
+	or "setenv kernsize 500000 ; saveenv" from the U-Boot serial console. \
+	Instead of the sysupgrade image, you must then install the OpenWrt \
+	factory image, setting the force flag and wiping the configuration. \
+	(e.g. "sysupgrade -n -F openwrt-squashfs-factory.bin" on command line)
+endef
+
+define Device/linksys_ea6350v3
+	# The Linksys EA6350v3 has a uboot bootloader that does not
+	# support either booting lzma kernel images nor booting UBI
+	# partitions. This uboot, however, supports raw kernel images and
+	# gzipped images.
+	#
+	# As configured by the OEM factory, the device will boot the kernel
+	# from a fixed address with a fixed length of 3 MiB. Also, the
+	# device has a hard-coded kernel command line that requires the
+	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
+	# Oh... and the kernel partition overlaps with the rootfs
+	# partition (the same for alt_kernel and alt_rootfs).
+	#
+	# If you are planing re-partitioning the device, you may want to
+	# keep these details in mind:
+	# 1. The kernel addresses you should honor are 0x00000000 and
+	#    0x02800000 respectively.
+	# 2. The kernel size (plus the dtb) cannot exceed 3 MiB in size
+	#    unless the uboot environment variable "kernsize" is increased.
+	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
+	# 4. The kernel command line from uboot is harcoded to boot with
+	#    rootfs either in mtd11 or mtd13.
+	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA6350
+	DEVICE_VARIANT := v3
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 35840k
+	UBINIZE_OPTS := -E 5
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
+endef
+TARGET_DEVICES += linksys_ea6350v3
+
+define Device/linksys_ea8300
+	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := EA8300
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_ea8300
+
+define Device/linksys_mr8300
+	$(call Device/FitzImage)
+	$(call Device/kernel-size-6350-8300)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := MR8300
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 5120k
+	IMAGE_SIZE := 84992k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += linksys_mr8300
+
+define Device/linksys_whw03v2
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW03
+	DEVICE_VARIANT := V2
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 158720k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW03v2
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-leds-pca963x kmod-spi-dev kmod-bluetooth
+endef
+TARGET_DEVICES += linksys_whw03v2
+
+define Device/linksys_whw01
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := Linksys
+	DEVICE_MODEL := WHW01
+	KERNEL_SIZE := 6144k
+	IMAGE_SIZE := 75776K
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=WHW01
+	DEVICE_PACKAGES := uboot-envtools kmod-leds-pca963x
+endef
+TARGET_DEVICES += linksys_whw01
+
+define Device/luma_wrtq-329acn
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Luma Home
+	DEVICE_MODEL := WRTQ-329ACN
+	SOC := qcom-ipq4018
+	DEVICE_PACKAGES := kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio
+	IMAGE_SIZE := 76632k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += luma_wrtq-329acn
+
+define Device/meraki_mr33
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR33
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+endef
+TARGET_DEVICES += meraki_mr33
+
+define Device/meraki_mr74
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Cisco Meraki
+	DEVICE_MODEL := MR74
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
+	DEVICE_DTS_CONFIG := config@3
+endef
+TARGET_DEVICES += meraki_mr74
+
+define Device/mobipromo_cm520-79f
+	$(call Device/FitzImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := MobiPromo
+	DEVICE_MODEL := CM520-79F
+	SOC := qcom-ipq4019
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += mobipromo_cm520-79f
+
+define Device/netgear_ex61x0v2
+	$(call Device/DniImage)
+	DEVICE_VENDOR := NETGEAR
+	DEVICE_DTS_CONFIG := config@4
+	NETGEAR_BOARD_ID := EX6150v2series
+	NETGEAR_HW_ID := 29765285+16+0+128+2x2
+	IMAGE_SIZE := 14400k
+	SOC := qcom-ipq4018
+endef
+
+define Device/netgear_ex6100v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_MODEL := EX6100
+	DEVICE_VARIANT := v2
+endef
+TARGET_DEVICES += netgear_ex6100v2
+
+define Device/netgear_ex6150v2
+	$(call Device/netgear_ex61x0v2)
+	DEVICE_MODEL := EX6150
+	DEVICE_VARIANT := v2
+endef
+TARGET_DEVICES += netgear_ex6150v2
+
+define Device/netgear_orbi
+	$(call Device/DniImage)
+	SOC := qcom-ipq4019
+	DEVICE_VENDOR := NETGEAR
+	IMAGE/factory.img := append-kernel | pad-offset 128k 64 | \
+		append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | \
+		append-rootfs | pad-rootfs | netgear-dni
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | \
+		sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct e2fsprogs kmod-fs-ext4 losetup
+endef
+
+define Device/netgear_rbx50
+	$(call Device/netgear_orbi)
+	NETGEAR_HW_ID := 29765352+0+4000+512+2x2+2x2+4x4
+	KERNEL_SIZE := 3932160
+	ROOTFS_SIZE := 32243712
+	IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_rbr50
+	$(call Device/netgear_rbx50)
+	DEVICE_MODEL := RBR50
+	DEVICE_VARIANT := v1
+	NETGEAR_BOARD_ID := RBR50
+endef
+TARGET_DEVICES += netgear_rbr50
+
+define Device/netgear_rbs50
+	$(call Device/netgear_rbx50)
+	DEVICE_MODEL := RBS50
+	DEVICE_VARIANT := v1
+	NETGEAR_BOARD_ID := RBS50
+endef
+TARGET_DEVICES += netgear_rbs50
+
+define Device/netgear_srx60
+	$(call Device/netgear_orbi)
+	NETGEAR_HW_ID := 29765352+0+4096+512+2x2+2x2+4x4
+	KERNEL_SIZE := 3932160
+	ROOTFS_SIZE := 32243712
+	IMAGE_SIZE := 36175872
+endef
+
+define Device/netgear_srr60
+	$(call Device/netgear_srx60)
+	DEVICE_MODEL := SRR60
+	NETGEAR_BOARD_ID := SRR60
+endef
+TARGET_DEVICES += netgear_srr60
+
+define Device/netgear_srs60
+	$(call Device/netgear_srx60)
+	DEVICE_MODEL := SRS60
+	NETGEAR_BOARD_ID := SRS60
+endef
+TARGET_DEVICES += netgear_srs60
+
+define Device/netgear_wac510
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Netgear
+	DEVICE_MODEL := WAC510
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	IMAGES += factory.tar
+	IMAGE/factory.tar := append-ubi | wac5xx-netgear-tar
+	DEVICE_PACKAGES := uboot-envtools
+endef
+TARGET_DEVICES += netgear_wac510
+
+define Device/openmesh_a42
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A42
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@om.a42
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15616k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+TARGET_DEVICES += openmesh_a42
+
+define Device/openmesh_a62
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := OpenMesh
+	DEVICE_MODEL := A62
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@om.a62
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
+endef
+TARGET_DEVICES += openmesh_a62
+
+define Device/p2w_r619ac
+	$(call Device/FitzImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := P&W
+	DEVICE_MODEL := R619AC
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@10
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+
+define Device/p2w_r619ac-64m
+	$(call Device/p2w_r619ac)
+	DEVICE_VARIANT := 64M NAND
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+	$(call Device/p2w_r619ac)
+	DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
+define Device/pakedge_wr-1
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Pakedge
+	DEVICE_MODEL := WR-1
+	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
+	SOC := qcom-ipq4018
+	BLOCKSIZE := 64k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += pakedge_wr-1
+
+define Device/plasmacloud_pa1200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA1200
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@pc.pa1200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15616k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+endef
+TARGET_DEVICES += plasmacloud_pa1200
+
+define Device/plasmacloud_pa2200
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := Plasma Cloud
+	DEVICE_MODEL := PA2200
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@pc.pa2200
+	BLOCKSIZE := 64k
+	KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
+	IMAGE_SIZE := 15552k
+	IMAGES += factory.bin
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct
+endef
+TARGET_DEVICES += plasmacloud_pa2200
+
+define Device/qcom_ap-dk01.1-c1
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK01.1
+	DEVICE_VARIANT := C1
+	BOARD_NAME := ap-dk01.1-c1
+	SOC := qcom-ipq4019
+	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	$(call Device/FitImage)
+	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
+	DEFAULT := n
+endef
+TARGET_DEVICES += qcom_ap-dk01.1-c1
+
+define Device/qcom_ap-dk04.1-c1
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qualcomm Atheros
+	DEVICE_MODEL := AP-DK04.1
+	DEVICE_VARIANT := C1
+	SOC := qcom-ipq4019
+	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
+	KERNEL_INSTALL := 1
+	KERNEL_SIZE := 4048k
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	BOARD_NAME := ap-dk04.1-c1
+	DEFAULT := n
+endef
+TARGET_DEVICES += qcom_ap-dk04.1-c1
+
+define Device/qxwlan_e2600ac-c1
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C1
+	BOARD_NAME := e2600ac-c1
+	SOC := qcom-ipq4019
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c1
+
+define Device/qxwlan_e2600ac-c2
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Qxwlan
+	DEVICE_MODEL := E2600AC
+	DEVICE_VARIANT := C2
+	SOC := qcom-ipq4019
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+endef
+TARGET_DEVICES += qxwlan_e2600ac-c2
+
+define Device/sony_ncp-hg100-cellular
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Sony
+	DEVICE_MODEL := NCP-HG100/Cellular
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c4
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 8192k
+	IMAGE_SIZE := 128m
+	DEVICE_PACKAGES := e2fsprogs kmod-fs-ext4 uqmi
+endef
+TARGET_DEVICES += sony_ncp-hg100-cellular
+
+define Device/teltonika_rutx10
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX10
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+	DEVICE_PACKAGES := kmod-bluetooth
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += teltonika_rutx10
+
+define Device/teltonika_rutx12
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Teltonika
+	DEVICE_MODEL := RUTX12
+	SOC := qcom-ipq4018
+	DEVICE_DTS_CONFIG := config@5
+	KERNEL_INSTALL := 1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	FILESYSTEMS := squashfs
+	IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand | append-rutx-metadata
+	DEVICE_PACKAGES := kmod-bluetooth
+endef
+# Missing DSA Setup
+TARGET_DEVICES += teltonika_rutx12
+
+define Device/tel_x1pro
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Telco
+	DEVICE_MODEL := X1 Pro
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+	DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += tel_x1pro
+
+define Device/unielec_u4019-32m
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Unielec
+	DEVICE_MODEL := U4019
+	DEVICE_VARIANT := 32M
+	BOARD_NAME := u4019-32m
+	SOC := qcom-ipq4019
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 31232k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	DEFAULT := n
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += unielec_u4019-32m
+
+define Device/wallys_dr40x9
+	$(call Device/FitImage)
+	$(call Device/UbiFit)
+	DEVICE_VENDOR := Wallys
+	DEVICE_MODEL := DR40X9
+	SOC := qcom-ipq40x9
+	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	DEVICE_PACKAGES := ipq-wifi-wallys_dr40x9
+endef
+TARGET_DEVICES += wallys_dr40x9
+
+define Device/zte_mf18a
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZTE
+	DEVICE_MODEL := MF18A
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct
+endef
+TARGET_DEVICES += zte_mf18a
+
+define Device/zte_mf28x_common
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := ZTE
+	SOC := qcom-ipq4019
+	DEVICE_DTS_CONFIG := config@ap.dk04.1-c1
+	BLOCKSIZE := 128k
+	PAGESIZE := 2048
+	KERNEL_IN_UBI := 1
+	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi
+endef
+
+define Device/zte_mf286d
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF286D
+endef
+TARGET_DEVICES += zte_mf286d
+
+define Device/zte_mf289f
+	$(call Device/zte_mf28x_common)
+	DEVICE_MODEL := MF289F
+	DEVICE_PACKAGES += ath10k-firmware-qca9984-ct
+endef
+TARGET_DEVICES += zte_mf289f
+
+define Device/zyxel_nbg6617
+	$(call Device/FitImageLzma)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := NBG6617
+	SOC := qcom-ipq4018
+	KERNEL_SIZE := 4096k
+	ROOTFS_SIZE := 24960k
+	RAS_BOARD := NBG6617
+	RAS_ROOTFS_SIZE := 19840k
+	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
+	IMAGES += factory.bin
+#	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
+#	at least as large as the one of the initial firmware image (not the current
+#	one on the device). This only applies to the Web-UI, the bootlaoder ignores
+#	this minimum-size. However, the larger image can be flashed both ways.
+	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
+	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
+	DEVICE_PACKAGES := kmod-usb-ledtrig-usbport
+endef
+TARGET_DEVICES += zyxel_nbg6617
+
+define Device/zyxel_wre6606
+	$(call Device/FitImage)
+	DEVICE_VENDOR := ZyXEL
+	DEVICE_MODEL := WRE6606
+	DEVICE_DTS_CONFIG := config@4
+	SOC := qcom-ipq4018
+	IMAGE_SIZE := 13184k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
+endef
+# Missing DSA Setup
+#TARGET_DEVICES += zyxel_wre6606