mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00
Code Issues Releases Wiki Activity

Update 950-0785-ARM-dts-Add-bcm2711-rpi-cm4antrouter5g.dts.patch

Browse source
This commit is contained in:
suyuan168 2022-01-05 20:15:10 +08:00
parent 78feccdb09
commit a45cae25d8
1 changed files with 27 additions and 20 deletions
Download patch file Download diff file Expand all files Collapse all files

47
root/target/linux/bcm27xx/patches-5.15/950-0785-ARM-dts-Add-bcm2711-rpi-cm4antrouter5g.dts.patch
View file

@ -1,19 +1,26 @@
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts 2022-01-04 02:51:16.000000000 +0800 --- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts 2022-01-04 02:51:16.000000000 +0800
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts 2022-01-04 03:10:34.000000000 +0800 +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts 2022-01-04 03:10:34.000000000 +0800
@@ -74,12 +74,6 @@ @@ -91,19 +91,12 @@
"SD_PWR_ON", gpio-line-names = "BT_ON",
"ANT2"; "WL_ON",
"PWR_LED_OFF",
- "ANT1",
"VDD_SD_IO_SEL",
"CAM_GPIO",
"SD_PWR_ON",
"ANT2";
status = "okay";
- ant1: ant1 { - ant1: ant1 {
- gpio-hog; - gpio-hog;
- gpios = <3 GPIO_ACTIVE_HIGH>; - gpios = <3 GPIO_ACTIVE_HIGH>;
- output-high; - output-high;
- }; - };
- -
ant2: ant2 { ant2: ant2 {
gpio-hog; gpio-hog;
gpios = <7 GPIO_ACTIVE_HIGH>; gpios = <7 GPIO_ACTIVE_HIGH>;
@@ -108,23 +102,10 @@ @@ -138,23 +131,10 @@
"SPI_MISO", "SPI_MISO",
"SPI_MOSI", "SPI_MOSI",
"SPI_SCLK", "SPI_SCLK",
@ -37,7 +44,7 @@
"RGMII_MDIO", "RGMII_MDIO",
"RGMIO_MDC", "RGMIO_MDC",
/* Used by BT module */ /* Used by BT module */
@@ -311,14 +292,9 @@ @@ -368,14 +348,9 @@
mmc2 = &sdhost; mmc2 = &sdhost;
i2c3 = &i2c3; i2c3 = &i2c3;
i2c4 = &i2c4; i2c4 = &i2c4;
@ -52,7 +59,7 @@
/delete-property/ intc; /delete-property/ intc;
}; };
@@ -341,49 +317,7 @@ @@ -398,49 +373,7 @@
pinctrl-0 = <&uart1_pins>; pinctrl-0 = <&uart1_pins>;
}; };
@ -102,7 +109,7 @@
spi4_pins: spi4_pins { spi4_pins: spi4_pins {
brcm,pins = <5 6 7>; brcm,pins = <5 6 7>;
brcm,function = <BCM2835_FSEL_ALT3>; brcm,function = <BCM2835_FSEL_ALT3>;
@@ -394,38 +328,12 @@ @@ -451,38 +384,12 @@
brcm,function = <BCM2835_FSEL_GPIO_OUT>; brcm,function = <BCM2835_FSEL_GPIO_OUT>;
}; };
@ -141,7 +148,7 @@
i2c3_pins: i2c3 { i2c3_pins: i2c3 {
brcm,pins = <4 5>; brcm,pins = <4 5>;
brcm,function = <BCM2835_FSEL_ALT5>; brcm,function = <BCM2835_FSEL_ALT5>;
@@ -438,23 +346,6 @@ @@ -495,23 +402,6 @@
brcm,pull = <BCM2835_PUD_UP>; brcm,pull = <BCM2835_PUD_UP>;
}; };
@ -165,7 +172,7 @@
sdio_pins: sdio_pins { sdio_pins: sdio_pins {
brcm,pins = <34 35 36 37 38 39>; brcm,pins = <34 35 36 37 38 39>;
brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1 brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
@@ -497,29 +388,12 @@ @@ -554,29 +444,12 @@
brcm,function = <BCM2835_FSEL_ALT4>; brcm,function = <BCM2835_FSEL_ALT4>;
brcm,pull = <0 2>; brcm,pull = <0 2>;
}; };
@ -195,10 +202,11 @@
// ============================================= // =============================================
// Board specific stuff here // Board specific stuff here
@@ -554,6 +428,80 @@ @@ -611,6 +484,81 @@
linux,default-trigger = "default-on"; linux,default-trigger = "default-on";
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>; gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
}; };
+
+ wlan2g { + wlan2g {
+ label = "wlan2g"; + label = "wlan2g";
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
@ -276,7 +284,7 @@
}; };
&pwm1 { &pwm1 {
@@ -583,21 +531,6 @@ @@ -640,21 +588,6 @@
eth_led0 = <&phy1>,"led-modes:0"; eth_led0 = <&phy1>,"led-modes:0";
eth_led1 = <&phy1>,"led-modes:4"; eth_led1 = <&phy1>,"led-modes:4";
@ -298,4 +306,3 @@
- <&spi0>, "dmas:8=", <&dma40>; - <&spi0>, "dmas:8=", <&dma40>;
}; };
}; };
\ No newline at end of file