Add kernel 6.6 x86_64 support (without modemmanager and wifi)

6.6/include/kernel-6.6

@@ -0,0 +1,2 @@
+LINUX_VERSION-6.6 = -rc3
+LINUX_KERNEL_HASH-6.6-rc3 = 0044724ea1991ff1592f5959ea113aa6a9fcd3ac415d5c48e65e592dae864f91

6.6/package/firmware/linux-firmware/intel.mk

@@ -0,0 +1,303 @@
+Package/ibt-firmware = $(call Package/firmware-default,Intel bluetooth firmware)
+define Package/ibt-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/intel
+	$(CP) \
+		$(PKG_BUILD_DIR)/intel/*.bseq \
+		$(1)/lib/firmware/intel
+endef
+$(eval $(call BuildPackage,ibt-firmware))
+
+Package/iwl3945-firmware = $(call Package/firmware-default,Intel IWL3945 firmware)
+define Package/iwl3945-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-3945-2.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwl3945-firmware))
+
+Package/iwl4965-firmware = $(call Package/firmware-default,Intel IWL4965 firmware)
+define Package/iwl4965-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-4965-2.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwl4965-firmware))
+
+Package/iwlwifi-firmware-iwl100 = $(call Package/firmware-default,Intel Centrino Wireless-N 100 firmware)
+define Package/iwlwifi-firmware-iwl100/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-100-5.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl100))
+
+Package/iwlwifi-firmware-iwl1000 = $(call Package/firmware-default,Intel Centrino Wireless-N 1000 firmware)
+define Package/iwlwifi-firmware-iwl1000/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-1000-5.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl1000))
+
+Package/iwlwifi-firmware-iwl105 = $(call Package/firmware-default,Intel Centrino Wireless-N 105 firmware)
+define Package/iwlwifi-firmware-iwl105/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-105-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl105))
+
+Package/iwlwifi-firmware-iwl135 = $(call Package/firmware-default,Intel Centrino Wireless-N 135 firmware)
+define Package/iwlwifi-firmware-iwl135/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-135-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl135))
+
+Package/iwlwifi-firmware-iwl2000 = $(call Package/firmware-default,Intel Centrino Wireless-N 2200 firmware)
+define Package/iwlwifi-firmware-iwl2000/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-2000-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl2000))
+
+Package/iwlwifi-firmware-iwl2030 = $(call Package/firmware-default,Intel Centrino Wireless-N 2230 firmware)
+define Package/iwlwifi-firmware-iwl2030/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-2030-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl2030))
+
+Package/iwlwifi-firmware-iwl3160 = $(call Package/firmware-default,Intel Wireless 3160 firmware)
+define Package/iwlwifi-firmware-iwl3160/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-3160-17.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl3160))
+
+Package/iwlwifi-firmware-iwl3168 = $(call Package/firmware-default,Intel Wireless 3168 firmware)
+define Package/iwlwifi-firmware-iwl3168/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-3168-29.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl3168))
+
+Package/iwlwifi-firmware-iwl5000 = $(call Package/firmware-default,Intel Wireless 5100AGN 5300AGN and 5350AGN firmware)
+define Package/iwlwifi-firmware-iwl5000/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-5000-5.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl5000))
+
+Package/iwlwifi-firmware-iwl5150 = $(call Package/firmware-default,Intel Wireless Wi-Fi 5150AGN firmware)
+define Package/iwlwifi-firmware-iwl5150/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-5150-2.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl5150))
+
+Package/iwlwifi-firmware-iwl6000g2 = $(call Package/firmware-default,Intel Centrino 6300 and 6200 firmware)
+define Package/iwlwifi-firmware-iwl6000g2/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-6000-4.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl6000g2))
+
+Package/iwlwifi-firmware-iwl6000g2a = $(call Package/firmware-default,Intel Centrino 6205 firmware)
+define Package/iwlwifi-firmware-iwl6000g2a/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-6000g2a-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl6000g2a))
+
+Package/iwlwifi-firmware-iwl6000g2b = $(call Package/firmware-default,Intel Centrino 6230 1030 130 and 6235 firmware)
+define Package/iwlwifi-firmware-iwl6000g2b/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-6000g2b-6.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl6000g2b))
+
+Package/iwlwifi-firmware-iwl6050 = $(call Package/firmware-default,Intel Centrino 6150 and 6250 firmware)
+define Package/iwlwifi-firmware-iwl6050/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-6050-5.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl6050))
+
+Package/iwlwifi-firmware-iwl7260 = $(call Package/firmware-default,Intel Wireless 7260 firmware)
+define Package/iwlwifi-firmware-iwl7260/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-7260-17.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl7260))
+
+Package/iwlwifi-firmware-iwl7265 = $(call Package/firmware-default,Intel Wireless 7265 firmware)
+define Package/iwlwifi-firmware-iwl7265/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-7265-17.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl7265))
+
+Package/iwlwifi-firmware-iwl7265d = $(call Package/firmware-default,Intel Wireless 7265D and 3165 firmware)
+define Package/iwlwifi-firmware-iwl7265d/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-7265D-29.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl7265d))
+
+Package/iwlwifi-firmware-iwl8260c = $(call Package/firmware-default,Intel Wireless 8260 and 4165 firmware)
+define Package/iwlwifi-firmware-iwl8260c/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-8000C-36.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl8260c))
+
+Package/iwlwifi-firmware-iwl8265 = $(call Package/firmware-default,Intel Wireless 8265 firmware)
+define Package/iwlwifi-firmware-iwl8265/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-8265-36.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl8265))
+
+Package/iwlwifi-firmware-iwl9000 = $(call Package/firmware-default,Intel Wireless 9000 firmware)
+define Package/iwlwifi-firmware-iwl9000/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-9000-pu-b0-jf-b0-46.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl9000))
+
+Package/iwlwifi-firmware-iwl9260 = $(call Package/firmware-default,Intel Wireless 9260 firmware)
+define Package/iwlwifi-firmware-iwl9260/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-9260-th-b0-jf-b0-46.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-iwl9260))
+
+Package/iwlwifi-firmware-ax200 = $(call Package/firmware-default,Intel AX200 firmware)
+define Package/iwlwifi-firmware-ax200/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-cc-a0-66.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax200))
+
+Package/iwlwifi-firmware-ax201 = $(call Package/firmware-default,Intel AX201 firmware)
+define Package/iwlwifi-firmware-ax201/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-so-a0-hr-b0-72.ucode $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax201))
+
+Package/iwlwifi-firmware-ax210 = $(call Package/firmware-default,Intel AX210 firmware)
+define Package/iwlwifi-firmware-ax210/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-ty-a0-gf-a0-66.ucode $(1)/lib/firmware
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/iwlwifi-ty-a0-gf-a0.pnvm $(1)/lib/firmware
+endef
+$(eval $(call BuildPackage,iwlwifi-firmware-ax210))
+
+Package/e100-firmware = $(call Package/firmware-default,Intel e100)
+define Package/e100-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/e100
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/e100/d101m_ucode.bin $(1)/lib/firmware/e100/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/e100/d101s_ucode.bin $(1)/lib/firmware/e100/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/e100/d102e_ucode.bin $(1)/lib/firmware/e100/
+endef
+$(eval $(call BuildPackage,e100-firmware))
+
+Package/i915-firmware = $(call Package/firmware-default,Intel GPU firmware)
+define Package/i915-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/i915
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_dmc_ver1_09.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_dmc_ver2_09.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_dmc_ver2_10.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_dmc_ver2_12.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_dmc_ver2_14.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_dmc_ver2_16.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_guc_62.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_guc_69.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_guc_70.1.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adlp_guc_70.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/adls_dmc_ver2_01.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_dmc_ver1_07.bin $(1)/lib/firmware/i915/
+	ln -s /lib/firmware/i915/bxt_dmc_ver1_07.bin $(1)/lib/firmware/i915/bxt_dmc_ver1.bin
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_32.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_ver8_7.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_guc_ver9_29.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_huc_2.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_huc_ver01_07_1398.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/bxt_huc_ver01_8_2893.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cml_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cml_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cml_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cml_huc_4.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cnl_dmc_ver1_06.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/cnl_dmc_ver1_07.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/dg1_dmc_ver2_02.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/dg1_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/dg1_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/dg1_huc_7.7.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/dg1_huc_7.9.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_guc_33.0.4.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_guc_69.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_guc_70.1.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/ehl_huc_9.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_dmc_ver1_04.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_guc_32.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_guc_70.1.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_huc_4.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/glk_huc_ver03_01_2893.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_dmc_ver1_07.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_dmc_ver1_09.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_guc_32.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_huc_9.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/icl_huc_ver8_4_3238.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_dmc_ver1_01.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_dmc_ver1_04.bin $(1)/lib/firmware/i915/
+	ln -s /lib/firmware/i915/kbl_dmc_ver1_04.bin $(1)/lib/firmware/i915/kbl_dmc_ver1.bin
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_32.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_70.1.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_ver9_14.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_guc_ver9_39.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_huc_4.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/kbl_huc_ver02_00_1810.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/rkl_dmc_ver2_02.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/rkl_dmc_ver2_03.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_dmc_ver1_23.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_dmc_ver1_26.bin $(1)/lib/firmware/i915/
+	ln -s /lib/firmware/i915/skl_dmc_ver1_26.bin $(1)/lib/firmware/i915/skl_dmc_ver1.bin
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_dmc_ver1_27.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_32.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_33.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_ver1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_ver4.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_ver6_1.bin $(1)/lib/firmware/i915/
+	ln -s /lib/firmware/i915/skl_guc_ver6_1.bin $(1)/lib/firmware/i915/skl_guc_ver6.bin
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_guc_ver9_33.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_huc_2.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/skl_huc_ver01_07_1398.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_dmc_ver2_04.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_dmc_ver2_06.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_dmc_ver2_08.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_dmc_ver2_12.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_guc_35.2.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_guc_49.0.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_guc_62.0.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_guc_70.1.1.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_huc.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_huc_7.0.12.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_huc_7.0.3.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_huc_7.5.0.bin $(1)/lib/firmware/i915/
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/i915/tgl_huc_7.9.3.bin $(1)/lib/firmware/i915/
+endef
+$(eval $(call BuildPackage,i915-firmware))

6.6/package/kernel/linux/modules/fs.mk

@@ -0,0 +1,721 @@
+#
+# Copyright (C) 2006-2011 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+FS_MENU:=Filesystems
+
+define KernelPackage/fs-9p
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Plan 9 Resource Sharing Support
+  DEPENDS:=+kmod-9pnet +LINUX_6_1:kmod-fs-netfs
+  KCONFIG:=\
+	CONFIG_9P_FS \
+	CONFIG_9P_FS_POSIX_ACL=n \
+	CONFIG_9P_FS_SECURITY=n \
+	CONFIG_9P_FSCACHE=n
+  FILES:=$(LINUX_DIR)/fs/9p/9p.ko
+  AUTOLOAD:=$(call AutoLoad,30,9p)
+endef
+
+define KernelPackage/fs-9p/description
+  Kernel module for Plan 9 Resource Sharing Support support
+endef
+
+$(eval $(call KernelPackage,fs-9p))
+
+
+define KernelPackage/fs-afs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Andrew FileSystem client
+  DEFAULT:=n
+  DEPENDS:=+kmod-rxrpc +kmod-dnsresolver +kmod-fs-fscache
+  KCONFIG:=\
+	CONFIG_AFS_FS=m \
+	CONFIG_AFS_DEBUG=n \
+	CONFIG_AFS_FSCACHE=y
+  FILES:=$(LINUX_DIR)/fs/afs/kafs.ko
+  AUTOLOAD:=$(call AutoLoad,30,kafs)
+endef
+
+define KernelPackage/fs-afs/description
+  Kernel module for Andrew FileSystem client support
+endef
+
+$(eval $(call KernelPackage,fs-afs))
+
+define KernelPackage/fs-autofs4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=AUTOFS4 filesystem support
+  KCONFIG:= \
+	CONFIG_AUTOFS4_FS \
+	CONFIG_AUTOFS_FS
+  FILES:= \
+	$(LINUX_DIR)/fs/autofs/autofs4.ko
+  AUTOLOAD:=$(call AutoLoad,30,autofs4)
+endef
+
+define KernelPackage/fs-autofs4/description
+ Kernel module for AutoFS4 support
+endef
+
+$(eval $(call KernelPackage,fs-autofs4))
+
+
+define KernelPackage/fs-btrfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=BTRFS filesystem support
+  DEPENDS:=+kmod-lib-crc32c +kmod-lib-lzo +kmod-lib-zlib-inflate +kmod-lib-zlib-deflate +kmod-lib-raid6 +kmod-lib-xor +kmod-lib-zstd
+  KCONFIG:=\
+	CONFIG_BTRFS_FS \
+	CONFIG_BTRFS_FS_CHECK_INTEGRITY=n
+  FILES:=\
+	$(LINUX_DIR)/fs/btrfs/btrfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,btrfs,1)
+endef
+
+define KernelPackage/fs-btrfs/description
+ Kernel module for BTRFS support
+endef
+
+$(eval $(call KernelPackage,fs-btrfs))
+
+
+define KernelPackage/fs-smbfs-common
+  SUBMENU:=$(FS_MENU)
+  TITLE:=SMBFS common dependencies support
+  HIDDEN:=1
+  KCONFIG:=\
+	CONFIG_SMBFS_COMMON@lt6.1 \
+	CONFIG_SMBFS@ge6.1
+  FILES:= \
+	$(LINUX_DIR)/fs/smbfs_common/cifs_arc4.ko@lt6.1 \
+	$(LINUX_DIR)/fs/smbfs_common/cifs_md4.ko@lt6.1 \
+	$(LINUX_DIR)/fs/smb/common/cifs_arc4.ko@ge6.1 \
+	$(LINUX_DIR)/fs/smb/common/cifs_md4.ko@ge6.1
+endef
+
+define KernelPackage/fs-smbfs-common/description
+ Kernel module dependency for CIFS or SMB_SERVER support
+endef
+
+$(eval $(call KernelPackage,fs-smbfs-common))
+
+
+define KernelPackage/fs-cifs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=CIFS support
+  KCONFIG:= \
+	CONFIG_CIFS \
+	CONFIG_CIFS_DFS_UPCALL=n \
+	CONFIG_CIFS_UPCALL=n
+  FILES:= \
+	$(LINUX_DIR)/fs/cifs/cifs.ko@lt6.1 \
+	$(LINUX_DIR)/fs/smb/client/cifs.ko@ge6.1
+  AUTOLOAD:=$(call AutoLoad,30,cifs)
+  $(call AddDepends/nls)
+  DEPENDS+= \
+    +kmod-fs-smbfs-common \
+    +kmod-crypto-md5 \
+    +kmod-crypto-sha256 \
+    +kmod-crypto-sha512 \
+    +kmod-crypto-cmac \
+    +kmod-crypto-hmac \
+    +kmod-crypto-aead \
+    +kmod-crypto-ccm \
+    +kmod-crypto-ecb \
+    +kmod-crypto-des \
+    +kmod-asn1-decoder \
+    +kmod-oid-registry \
+    +kmod-dnsresolver
+endef
+
+define KernelPackage/fs-cifs/description
+ Kernel module for CIFS support
+endef
+
+$(eval $(call KernelPackage,fs-cifs))
+
+
+define KernelPackage/fs-configfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Configuration filesystem support
+  KCONFIG:= \
+	CONFIG_CONFIGFS_FS
+  FILES:=$(LINUX_DIR)/fs/configfs/configfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,configfs)
+endef
+
+define KernelPackage/fs-configfs/description
+ Kernel module for configfs support
+endef
+
+$(eval $(call KernelPackage,fs-configfs))
+
+
+define KernelPackage/fs-cramfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Compressed RAM/ROM filesystem support
+  DEPENDS:=+kmod-lib-zlib-inflate
+  KCONFIG:= \
+	CONFIG_CRAMFS
+  FILES:=$(LINUX_DIR)/fs/cramfs/cramfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,cramfs)
+endef
+
+define KernelPackage/fs-cramfs/description
+ Kernel module for cramfs support
+endef
+
+$(eval $(call KernelPackage,fs-cramfs))
+
+
+define KernelPackage/fs-efivarfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=efivar filesystem support
+  KCONFIG:=CONFIG_EFIVAR_FS
+  FILES:=$(LINUX_DIR)/fs/efivarfs/efivarfs.ko
+  DEPENDS:=@(x86_64||x86)
+  AUTOLOAD:=$(call Autoload,90,efivarfs)
+endef
+
+define KernelPackage/fs-efivarfs/description
+  Kernel module to support efivarfs file system mountpoint.
+endef
+
+$(eval $(call KernelPackage,fs-efivarfs))
+
+
+define KernelPackage/fs-exfat
+  SUBMENU:=$(FS_MENU)
+  TITLE:=exFAT filesystem support
+  KCONFIG:= \
+	CONFIG_EXFAT_FS \
+	CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
+  FILES:= $(LINUX_DIR)/fs/exfat/exfat.ko
+  AUTOLOAD:=$(call AutoLoad,30,exfat,1)
+  DEPENDS:=+kmod-nls-base
+endef
+
+define KernelPackage/fs-exfat/description
+ Kernel module for exFAT filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-exfat))
+
+
+define KernelPackage/fs-exportfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=exportfs kernel server support
+  KCONFIG:=CONFIG_EXPORTFS
+  FILES=$(LINUX_DIR)/fs/exportfs/exportfs.ko
+  AUTOLOAD:=$(call AutoLoad,20,exportfs,1)
+endef
+
+define KernelPackage/fs-exportfs/description
+ Kernel module for exportfs. Needed for some other modules.
+endef
+
+$(eval $(call KernelPackage,fs-exportfs))
+
+
+define KernelPackage/fs-ext4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=EXT4 filesystem support
+  DEPENDS := \
+    +kmod-lib-crc16 \
+    +kmod-crypto-hash \
+    +kmod-crypto-crc32c
+  KCONFIG:= \
+	CONFIG_EXT4_FS \
+	CONFIG_EXT4_ENCRYPTION=n \
+	CONFIG_JBD2
+  FILES:= \
+	$(LINUX_DIR)/fs/ext4/ext4.ko \
+	$(LINUX_DIR)/fs/jbd2/jbd2.ko \
+	$(LINUX_DIR)/fs/mbcache.ko
+  AUTOLOAD:=$(call AutoLoad,30,mbcache jbd2 ext4,1)
+endef
+
+define KernelPackage/fs-ext4/description
+ Kernel module for EXT4 filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-ext4))
+
+
+define KernelPackage/fs-f2fs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=F2FS filesystem support
+  DEPENDS:= +kmod-crypto-hash +kmod-crypto-crc32 +kmod-nls-base
+  KCONFIG:=CONFIG_F2FS_FS
+  FILES:=$(LINUX_DIR)/fs/f2fs/f2fs.ko
+  AUTOLOAD:=$(call AutoLoad,30,f2fs,1)
+endef
+
+define KernelPackage/fs-f2fs/description
+ Kernel module for F2FS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-f2fs))
+
+
+define KernelPackage/fs-fscache
+  SUBMENU:=$(FS_MENU)
+  TITLE:=General filesystem local cache manager
+  DEPENDS:=+kmod-fs-netfs
+  KCONFIG:=\
+	CONFIG_FSCACHE \
+	CONFIG_FSCACHE_STATS=y \
+	CONFIG_FSCACHE_HISTOGRAM=n \
+	CONFIG_FSCACHE_DEBUG=n \
+	CONFIG_FSCACHE_OBJECT_LIST=n \
+	CONFIG_CACHEFILES \
+	CONFIG_CACHEFILES_DEBUG=n \
+	CONFIG_CACHEFILES_HISTOGRAM=n \
+	CONFIG_CACHEFILES_ERROR_INJECTION=n@ge5.17 \
+	CONFIG_CACHEFILES_ONDEMAND=n@ge5.19
+  FILES:= \
+	$(LINUX_DIR)/fs/fscache/fscache.ko \
+	$(LINUX_DIR)/fs/cachefiles/cachefiles.ko
+  AUTOLOAD:=$(call AutoLoad,29,fscache cachefiles)
+endef
+
+$(eval $(call KernelPackage,fs-fscache))
+
+
+define KernelPackage/fs-hfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=HFS filesystem support
+  DEPENDS:=+kmod-cdrom
+  KCONFIG:=CONFIG_HFS_FS
+  FILES:=$(LINUX_DIR)/fs/hfs/hfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,hfs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-hfs/description
+ Kernel module for HFS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-hfs))
+
+
+define KernelPackage/fs-hfsplus
+  SUBMENU:=$(FS_MENU)
+  TITLE:=HFS+ filesystem support
+  DEPENDS:=+kmod-cdrom
+  KCONFIG:=CONFIG_HFSPLUS_FS
+  FILES:=$(LINUX_DIR)/fs/hfsplus/hfsplus.ko
+  AUTOLOAD:=$(call AutoLoad,30,hfsplus)
+  $(call AddDepends/nls,utf8)
+endef
+
+define KernelPackage/fs-hfsplus/description
+ Kernel module for HFS+ filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-hfsplus))
+
+
+define KernelPackage/fs-isofs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=ISO9660 filesystem support
+  DEPENDS:=+kmod-lib-zlib-inflate +kmod-cdrom
+  KCONFIG:=CONFIG_ISO9660_FS CONFIG_JOLIET=y CONFIG_ZISOFS=n
+  FILES:=$(LINUX_DIR)/fs/isofs/isofs.ko
+  AUTOLOAD:=$(call AutoLoad,30,isofs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-isofs/description
+ Kernel module for ISO9660 filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-isofs))
+
+
+define KernelPackage/fs-jfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=JFS filesystem support
+  KCONFIG:=CONFIG_JFS_FS
+  FILES:=$(LINUX_DIR)/fs/jfs/jfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,jfs,1)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-jfs/description
+ Kernel module for JFS support
+endef
+
+$(eval $(call KernelPackage,fs-jfs))
+
+
+define KernelPackage/fs-ksmbd
+  SUBMENU:=$(FS_MENU)
+  TITLE:=SMB kernel server support
+  DEPENDS:= \
+	  +kmod-nls-base \
+	  +kmod-nls-utf8 \
+	  +kmod-crypto-md4 \
+          +kmod-crypto-md5 \
+	  +kmod-crypto-hmac \
+	  +kmod-crypto-ecb \
+	  +kmod-crypto-des \
+	  +kmod-crypto-sha256 \
+	  +kmod-crypto-cmac \
+	  +kmod-crypto-sha512 \
+	  +kmod-crypto-aead \
+	  +kmod-crypto-ccm \
+	  +kmod-crypto-gcm \
+	  +kmod-asn1-decoder \
+	  +kmod-oid-registry \
+	  +kmod-fs-smbfs-common
+  KCONFIG:= \
+	CONFIG_SMB_SERVER \
+	CONFIG_SMB_SERVER_SMBDIRECT=n \
+	CONFIG_SMB_SERVER_CHECK_CAP_NET_ADMIN=n \
+	CONFIG_SMB_SERVER_KERBEROS5=n
+  FILES:= \
+	 $(LINUX_DIR)/fs/ksmbd/ksmbd.ko@lt6.1 \
+	 $(LINUX_DIR)/fs/smb/server/ksmbd.ko@ge6.1
+  AUTOLOAD:=$(call AutoLoad,41,ksmbd)
+endef
+
+define KernelPackage/fs-ksmbd/description
+ Kernel module for SMB kernel server support
+endef
+
+$(eval $(call KernelPackage,fs-ksmbd))
+
+
+define KernelPackage/fs-minix
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Minix filesystem support
+  KCONFIG:=CONFIG_MINIX_FS
+  FILES:=$(LINUX_DIR)/fs/minix/minix.ko
+  AUTOLOAD:=$(call AutoLoad,30,minix)
+endef
+
+define KernelPackage/fs-minix/description
+ Kernel module for Minix filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-minix))
+
+
+define KernelPackage/fs-msdos
+  SUBMENU:=$(FS_MENU)
+  TITLE:=MSDOS filesystem support
+  DEPENDS:=+kmod-fs-vfat
+  KCONFIG:=CONFIG_MSDOS_FS
+  FILES:=$(LINUX_DIR)/fs/fat/msdos.ko
+  AUTOLOAD:=$(call AutoLoad,40,msdos)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-msdos/description
+ Kernel module for MSDOS filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-msdos))
+
+
+define KernelPackage/fs-netfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Network Filesystems support
+  KCONFIG:= CONFIG_NETFS_SUPPORT
+  FILES:=$(LINUX_DIR)/fs/netfs/netfs.ko
+  AUTOLOAD:=$(call AutoLoad,28,netfs)
+endef
+
+$(eval $(call KernelPackage,fs-netfs))
+
+
+define KernelPackage/fs-nfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS filesystem client support
+  DEPENDS:=+kmod-fs-nfs-common +kmod-dnsresolver
+  KCONFIG:= \
+	CONFIG_NFS_FS \
+	CONFIG_NFS_USE_LEGACY_DNS=n \
+	CONFIG_NFS_USE_NEW_IDMAPPER=n
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfs.ko
+  AUTOLOAD:=$(call AutoLoad,40,nfs)
+endef
+
+define KernelPackage/fs-nfs/description
+ Kernel module for NFS client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs))
+
+
+define KernelPackage/fs-nfs-common
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Common NFS filesystem modules
+  DEPENDS:=+kmod-oid-registry
+  KCONFIG:= \
+	CONFIG_LOCKD \
+	CONFIG_SUNRPC \
+	CONFIG_GRACE_PERIOD \
+	CONFIG_NFS_V4=y \
+	CONFIG_NFS_V4_1=y \
+	CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" \
+	CONFIG_NFS_V4_1_MIGRATION=n \
+	CONFIG_NFS_V4_2=y \
+	CONFIG_NFS_V4_2_READ_PLUS=n
+  FILES:= \
+	$(LINUX_DIR)/fs/lockd/lockd.ko \
+	$(LINUX_DIR)/net/sunrpc/sunrpc.ko \
+	$(LINUX_DIR)/fs/nfs_common/grace.ko
+  AUTOLOAD:=$(call AutoLoad,30,grace sunrpc lockd)
+endef
+
+$(eval $(call KernelPackage,fs-nfs-common))
+
+
+define KernelPackage/fs-nfs-common-rpcsec
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS Secure RPC
+  DEPENDS:= \
+	+kmod-fs-nfs-common \
+	+kmod-crypto-des \
+	+kmod-crypto-cbc \
+	+kmod-crypto-cts \
+	+kmod-crypto-md5 \
+	+kmod-crypto-sha1 \
+	+kmod-crypto-hmac \
+	+kmod-crypto-ecb \
+	+kmod-crypto-arc4
+  KCONFIG:= \
+	CONFIG_SUNRPC_GSS \
+	CONFIG_RPCSEC_GSS_KRB5
+  FILES:= \
+	$(LINUX_DIR)/net/sunrpc/auth_gss/auth_rpcgss.ko \
+	$(LINUX_DIR)/net/sunrpc/auth_gss/rpcsec_gss_krb5.ko
+  AUTOLOAD:=$(call AutoLoad,31,auth_rpcgss rpcsec_gss_krb5)
+endef
+
+define KernelPackage/fs-nfs-common-rpcsec/description
+ Kernel modules for NFS Secure RPC
+endef
+
+$(eval $(call KernelPackage,fs-nfs-common-rpcsec))
+
+
+define KernelPackage/fs-nfs-v3
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS3 filesystem client support
+  DEPENDS:=+kmod-fs-nfs
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfsv3.ko
+  AUTOLOAD:=$(call AutoLoad,41,nfsv3)
+endef
+
+define KernelPackage/fs-nfs-v3/description
+ Kernel module for NFS v3 client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs-v3))
+
+
+define KernelPackage/fs-nfs-v4
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS4 filesystem client support
+  DEPENDS:=+kmod-fs-nfs
+  KCONFIG:= \
+	CONFIG_NFS_V4=y
+  FILES:= \
+	$(LINUX_DIR)/fs/nfs/nfsv4.ko
+  AUTOLOAD:=$(call AutoLoad,41,nfsv4)
+endef
+
+define KernelPackage/fs-nfs-v4/description
+ Kernel module for NFS v4 client support
+endef
+
+$(eval $(call KernelPackage,fs-nfs-v4))
+
+
+define KernelPackage/fs-nfsd
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NFS kernel server support
+  DEPENDS:=+kmod-fs-nfs-common +kmod-fs-exportfs +kmod-fs-nfs-common-rpcsec
+  KCONFIG:= \
+	CONFIG_NFSD \
+	CONFIG_NFSD_V4=y \
+	CONFIG_NFSD_V4_SECURITY_LABEL=n \
+	CONFIG_NFSD_BLOCKLAYOUT=n \
+	CONFIG_NFSD_SCSILAYOUT=n \
+	CONFIG_NFSD_FLEXFILELAYOUT=n \
+	CONFIG_NFSD_FAULT_INJECTION=n \
+	CONFIG_NFSD_V4_2_INTER_SSC=n
+  FILES:=$(LINUX_DIR)/fs/nfsd/nfsd.ko
+  AUTOLOAD:=$(call AutoLoad,40,nfsd)
+endef
+
+define KernelPackage/fs-nfsd/description
+ Kernel module for NFS kernel server support
+endef
+
+$(eval $(call KernelPackage,fs-nfsd))
+
+
+define KernelPackage/fs-ntfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NTFS filesystem read-only (old driver) support
+  KCONFIG:=CONFIG_NTFS_FS
+  FILES:=$(LINUX_DIR)/fs/ntfs/ntfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,ntfs)
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-ntfs/description
+ Kernel module for limited NTFS filesystem support. Support for writing
+ is extremely limited and disabled as a result.
+endef
+
+$(eval $(call KernelPackage,fs-ntfs))
+
+
+define KernelPackage/fs-ntfs3
+  SUBMENU:=$(FS_MENU)
+  TITLE:=NTFS filesystem read & write (new driver) support
+  KCONFIG:= CONFIG_NTFS3_FS CONFIG_NTFS3_FS_POSIX_ACL=y
+  FILES:=$(LINUX_DIR)/fs/ntfs3/ntfs3.ko
+  $(call AddDepends/nls)
+  AUTOLOAD:=$(call AutoLoad,80,ntfs3)
+endef
+
+define KernelPackage/fs-ntfs3/description
+ Kernel module for fully functional NTFS filesystem support. It allows
+ reading as well as writing.
+
+ It supports NTFS versions up to 3.1.
+endef
+
+$(eval $(call KernelPackage,fs-ntfs3))
+
+
+define KernelPackage/fs-reiserfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=ReiserFS filesystem support
+  KCONFIG:=CONFIG_REISERFS_FS
+  FILES:=$(LINUX_DIR)/fs/reiserfs/reiserfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,reiserfs,1)
+endef
+
+define KernelPackage/fs-reiserfs/description
+ Kernel module for ReiserFS support
+endef
+
+$(eval $(call KernelPackage,fs-reiserfs))
+
+
+define KernelPackage/fs-squashfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=SquashFS 4.0 filesystem support
+  KCONFIG:=CONFIG_SQUASHFS \
+	CONFIG_SQUASHFS_XZ=y
+  FILES:=$(LINUX_DIR)/fs/squashfs/squashfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,squashfs,1)
+endef
+
+define KernelPackage/fs-squashfs/description
+ Kernel module for SquashFS 4.0 support
+endef
+
+$(eval $(call KernelPackage,fs-squashfs))
+
+
+define KernelPackage/fs-udf
+  SUBMENU:=$(FS_MENU)
+  TITLE:=UDF filesystem support
+  KCONFIG:=CONFIG_UDF_FS
+  FILES:=$(LINUX_DIR)/fs/udf/udf.ko
+  AUTOLOAD:=$(call AutoLoad,30,udf)
+  DEPENDS:=+kmod-lib-crc-itu-t +kmod-cdrom
+  $(call AddDepends/nls)
+endef
+
+define KernelPackage/fs-udf/description
+ Kernel module for UDF filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-udf))
+
+
+define KernelPackage/fs-vfat
+  SUBMENU:=$(FS_MENU)
+  TITLE:=VFAT filesystem support
+  KCONFIG:= \
+	CONFIG_FAT_FS \
+	CONFIG_VFAT_FS
+  FILES:= \
+	$(LINUX_DIR)/fs/fat/fat.ko \
+	$(LINUX_DIR)/fs/fat/vfat.ko
+  AUTOLOAD:=$(call AutoLoad,30,fat vfat,1)
+  $(call AddDepends/nls,cp437 iso8859-1 utf8)
+endef
+
+define KernelPackage/fs-vfat/description
+ Kernel module for VFAT filesystem support
+endef
+
+$(eval $(call KernelPackage,fs-vfat))
+
+
+define KernelPackage/fs-xfs
+  SUBMENU:=$(FS_MENU)
+  TITLE:=XFS filesystem support
+  KCONFIG:=CONFIG_XFS_FS
+  DEPENDS:= +kmod-fs-exportfs +kmod-lib-crc32c
+  FILES:=$(LINUX_DIR)/fs/xfs/xfs.ko
+  AUTOLOAD:=$(call AutoLoad,30,xfs,1)
+endef
+
+define KernelPackage/fs-xfs/description
+ Kernel module for XFS support
+endef
+
+$(eval $(call KernelPackage,fs-xfs))
+
+
+define KernelPackage/fuse
+  SUBMENU:=$(FS_MENU)
+  TITLE:=FUSE (Filesystem in Userspace) support
+  KCONFIG:= CONFIG_FUSE_FS
+  FILES:=$(LINUX_DIR)/fs/fuse/fuse.ko
+  AUTOLOAD:=$(call AutoLoad,80,fuse)
+endef
+
+define KernelPackage/fuse/description
+ Kernel module for userspace filesystem support
+endef
+
+$(eval $(call KernelPackage,fuse))
+
+
+define KernelPackage/pstore
+  SUBMENU:=$(FS_MENU)
+  TITLE:=Pstore file system
+  DEFAULT:=m if ALL_KMODS
+  KCONFIG:= \
+	CONFIG_PSTORE \
+	CONFIG_PSTORE_COMPRESS=y \
+	CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" \
+	CONFIG_PSTORE_DEFLATE_COMPRESS=y \
+	CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y
+  FILES:= $(LINUX_DIR)/fs/pstore/pstore.ko
+  AUTOLOAD:=$(call AutoLoad,30,pstore,1)
+endef
+
+define KernelPackage/pstore/description
+ Kernel module for pstore filesystem support
+endef
+
+$(eval $(call KernelPackage,pstore))

6.6/package/kernel/linux/modules/virt.mk

@@ -0,0 +1,140 @@
+#
+# Copyright (C) 2016 Yousong Zhou <yszhou4tech@gmail.com>
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+define KernelPackage/irqbypass
+  SUBMENU:=Virtualization
+  TITLE:=IRQ offload/bypass manager
+  KCONFIG:=CONFIG_IRQ_BYPASS_MANAGER
+  HIDDEN:=1
+  FILES:= $(LINUX_DIR)/virt/lib/irqbypass.ko
+  AUTOLOAD:=$(call AutoProbe,irqbypass.ko)
+endef
+$(eval $(call KernelPackage,irqbypass))
+
+
+define KernelPackage/kvm-x86
+  SUBMENU:=Virtualization
+  TITLE:=Kernel-based Virtual Machine (KVM) support
+  DEPENDS:=@TARGET_x86_generic||TARGET_x86_64 +kmod-irqbypass
+  KCONFIG:=\
+	  CONFIG_KVM \
+	  CONFIG_KVM_MMU_AUDIT=n \
+	  CONFIG_VIRTUALIZATION=y
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm.ko
+  AUTOLOAD:=$(call AutoProbe,kvm.ko)
+endef
+
+define KernelPackage/kvm-x86/description
+  Support hosting fully virtualized guest machines using hardware
+  virtualization extensions.  You will need a fairly recent
+  processor equipped with virtualization extensions. You will also
+  need to select one or more of the processor modules.
+
+  This module provides access to the hardware capabilities through
+  a character device node named /dev/kvm.
+endef
+
+$(eval $(call KernelPackage,kvm-x86))
+
+
+define KernelPackage/kvm-intel
+  SUBMENU:=Virtualization
+  TITLE:=KVM for Intel processors support
+  DEPENDS:=+kmod-kvm-x86
+  KCONFIG:=CONFIG_KVM_INTEL
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm-intel.ko
+  AUTOLOAD:=$(call AutoProbe,kvm-intel.ko)
+endef
+
+define KernelPackage/kvm-intel/description
+  Provides support for KVM on Intel processors equipped with the VT
+  extensions.
+endef
+
+$(eval $(call KernelPackage,kvm-intel))
+
+
+define KernelPackage/kvm-amd
+  SUBMENU:=Virtualization
+  TITLE:=KVM for AMD processors support
+  DEPENDS:=+kmod-kvm-x86
+  KCONFIG:=CONFIG_KVM_AMD
+  FILES:= $(LINUX_DIR)/arch/$(LINUX_KARCH)/kvm/kvm-amd.ko
+  AUTOLOAD:=$(call AutoProbe,kvm-amd.ko)
+endef
+
+define KernelPackage/kvm-amd/description
+  Provides support for KVM on AMD processors equipped with the AMD-V
+  (SVM) extensions.
+endef
+
+$(eval $(call KernelPackage,kvm-amd))
+
+
+define KernelPackage/vfio
+  SUBMENU:=Virtualization
+  TITLE:=VFIO Non-Privileged userspace driver framework
+  DEPENDS:=@TARGET_x86_64||TARGET_armsr_armv8
+  KCONFIG:= \
+	CONFIG_VFIO \
+	CONFIG_VFIO_NOIOMMU=n \
+	CONFIG_VFIO_MDEV=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/vfio/vfio.ko \
+	$(LINUX_DIR)/drivers/vfio/vfio_iommu_type1.ko
+  AUTOLOAD:=$(call AutoProbe,vfio vfio_iommu_type1)
+endef
+
+define KernelPackage/vfio/description
+  VFIO provides a framework for secure userspace device drivers.
+endef
+
+$(eval $(call KernelPackage,vfio))
+
+
+define KernelPackage/vfio-pci
+  SUBMENU:=Virtualization
+  TITLE:=Generic VFIO support for any PCI device
+  DEPENDS:=@TARGET_x86_64||TARGET_armsr_armv8 @PCI_SUPPORT +kmod-vfio +kmod-irqbypass
+  KCONFIG:= \
+	CONFIG_VFIO_PCI \
+	CONFIG_VFIO_PCI_IGD=n
+  FILES:= \
+	$(LINUX_DIR)/drivers/vfio/pci/vfio-pci-core.ko \
+	$(LINUX_DIR)/drivers/vfio/pci/vfio-pci.ko
+  AUTOLOAD:=$(call AutoProbe,vfio-pci)
+endef
+
+define KernelPackage/vfio-pci/description
+  Support for the generic PCI VFIO bus driver which can connect any PCI
+  device to the VFIO framework.
+endef
+
+$(eval $(call KernelPackage,vfio-pci))
+
+
+define KernelPackage/vhost
+  SUBMENU:=Virtualization
+  TITLE:=Host kernel accelerator for virtio (base)
+  KCONFIG:=CONFIG_VHOST
+  FILES:=$(LINUX_DIR)/drivers/vhost/vhost.ko \
+    $(LINUX_DIR)/drivers/vhost/vhost_iotlb.ko
+  AUTOLOAD:=$(call AutoProbe,vhost vhost_iotlb)
+endef
+
+$(eval $(call KernelPackage,vhost))
+
+
+define KernelPackage/vhost-net
+  SUBMENU:=Virtualization
+  TITLE:=Host kernel accelerator for virtio-net
+  DEPENDS:=+kmod-tun +kmod-vhost
+  KCONFIG:=CONFIG_VHOST_NET
+  FILES:=$(LINUX_DIR)/drivers/vhost/vhost_net.ko
+  AUTOLOAD:=$(call AutoProbe,vhost_net)
+endef
+
+$(eval $(call KernelPackage,vhost-net))

6.6/package/kernel/mt76/Makefile

@@ -0,0 +1,587 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=mt76
+PKG_RELEASE=5
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=
+
+PKG_SOURCE_URL:=https://github.com/openwrt/mt76
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2023-05-13
+PKG_SOURCE_VERSION:=969b7b5ebd129068ca56e4b0d831593a2f92382f
+PKG_MIRROR_HASH:=d28869591d1cb9a967b72f5cd8215c7b2c3388b7b31147b7b18c797018ab8ffb
+
+PKG_MAINTAINER:=Felix Fietkau <nbd@nbd.name>
+PKG_USE_NINJA:=0
+PKG_BUILD_PARALLEL:=1
+
+PKG_CONFIG_DEPENDS += \
+	CONFIG_PACKAGE_kmod-mt76-usb \
+	CONFIG_PACKAGE_kmod-mt76x02-common \
+	CONFIG_PACKAGE_kmod-mt76x0-common \
+	CONFIG_PACKAGE_kmod-mt76x0u \
+	CONFIG_PACKAGE_kmod-mt76x2-common \
+	CONFIG_PACKAGE_kmod-mt76x2 \
+	CONFIG_PACKAGE_kmod-mt76x2u \
+	CONFIG_PACKAGE_kmod-mt7603 \
+	CONFIG_PACKAGE_CFG80211_TESTMODE
+
+STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+include $(INCLUDE_DIR)/cmake.mk
+
+CMAKE_SOURCE_DIR:=$(PKG_BUILD_DIR)/tools
+CMAKE_BINARY_DIR:=$(PKG_BUILD_DIR)/tools
+
+define KernelPackage/mt76-default
+  SUBMENU:=Wireless Drivers
+  DEPENDS:= \
+	+kmod-mac80211 \
+	+@DRIVER_11AC_SUPPORT \
+	+@KERNEL_PAGE_POOL
+endef
+
+define KernelPackage/mt76
+  SUBMENU:=Wireless Drivers
+  TITLE:=MediaTek MT76x2/MT7603 wireless driver (metapackage)
+  DEPENDS:= \
+	+kmod-mt76-core +kmod-mt76x2 +kmod-mt7603
+endef
+
+define KernelPackage/mt76-core
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76xx wireless driver
+  HIDDEN:=1
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76.ko
+endef
+
+define KernelPackage/mt76-usb
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76xx wireless driver USB support
+  DEPENDS += +kmod-usb-core +kmod-mt76-core
+  HIDDEN:=1
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76-usb.ko
+endef
+
+define KernelPackage/mt76x02-usb
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x0/MT76x2 USB wireless driver common code
+  DEPENDS+=+kmod-mt76-usb +kmod-mt76x02-common
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/mt76x02-usb.ko
+endef
+
+define KernelPackage/mt76x02-common
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x0/MT76x2 wireless driver common code
+  DEPENDS+=+kmod-mt76-core
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/mt76x02-lib.ko
+endef
+
+define KernelPackage/mt76x0-common
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x0 wireless driver common code
+  DEPENDS+=+kmod-mt76x02-common
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/mt76x0/mt76x0-common.ko
+endef
+
+define KernelPackage/mt76x0e
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x0E wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76x0-common
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76x0/mt76x0e.ko
+  AUTOLOAD:=$(call AutoProbe,mt76x0e)
+endef
+
+define KernelPackage/mt76x0u
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x0U wireless driver
+  DEPENDS+=+kmod-mt76x0-common +kmod-mt76x02-usb
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76x0/mt76x0u.ko
+  AUTOLOAD:=$(call AutoProbe,mt76x0u)
+endef
+
+define KernelPackage/mt76x2-common
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x2 wireless driver common code
+  DEPENDS+=+kmod-mt76-core +kmod-mt76x02-common
+  HIDDEN:=1
+  FILES:=$(PKG_BUILD_DIR)/mt76x2/mt76x2-common.ko
+endef
+
+define KernelPackage/mt76x2u
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x2U wireless driver
+  DEPENDS+=+kmod-mt76x2-common +kmod-mt76x02-usb
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76x2/mt76x2u.ko
+  AUTOLOAD:=$(call AutoProbe,mt76x2u)
+endef
+
+define KernelPackage/mt76x2
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT76x2 wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76x2-common
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt76x2/mt76x2e.ko
+  AUTOLOAD:=$(call AutoProbe,mt76x2e)
+endef
+
+define KernelPackage/mt7603
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7603 wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core
+  FILES:=\
+	$(PKG_BUILD_DIR)/mt7603/mt7603e.ko
+  AUTOLOAD:=$(call AutoProbe,mt7603e)
+endef
+
+define KernelPackage/mt76-connac
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615/MT79xx wireless driver common code
+  HIDDEN:=1
+  DEPENDS+=+kmod-mt76-core
+  FILES:= $(PKG_BUILD_DIR)/mt76-connac-lib.ko
+endef
+
+define KernelPackage/mt76-sdio
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615/MT79xx SDIO driver common code
+  HIDDEN:=1
+  DEPENDS+=+kmod-mt76-core +kmod-mmc
+  FILES:= $(PKG_BUILD_DIR)/mt76-sdio.ko
+endef
+
+define KernelPackage/mt7615-common
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615 wireless driver common code
+  HIDDEN:=1
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-core +kmod-mt76-connac +kmod-hwmon-core
+  FILES:= $(PKG_BUILD_DIR)/mt7615/mt7615-common.ko
+endef
+
+define KernelPackage/mt7615-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615e firmware
+  DEPENDS+=+kmod-mt7615e
+endef
+
+define KernelPackage/mt7615e
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615e wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt7615-common
+  FILES:= $(PKG_BUILD_DIR)/mt7615/mt7615e.ko
+  AUTOLOAD:=$(call AutoProbe,mt7615e)
+endef
+
+define KernelPackage/mt7622-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7622 firmware
+  DEPENDS+=+kmod-mt7615e
+endef
+
+define KernelPackage/mt7663-firmware-ap
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7663e firmware (optimized for AP)
+endef
+
+define KernelPackage/mt7663-firmware-sta
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7663e firmware (client mode offload)
+endef
+
+define KernelPackage/mt7663-usb-sdio
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7663 USB/SDIO shared code
+  DEPENDS+=+kmod-mt7615-common
+  HIDDEN:=1
+  FILES:= \
+	$(PKG_BUILD_DIR)/mt7615/mt7663-usb-sdio-common.ko
+endef
+
+define KernelPackage/mt7663s
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7663s wireless driver
+  DEPENDS+=+kmod-mt76-sdio +kmod-mt7615-common +kmod-mt7663-usb-sdio
+  FILES:= \
+	$(PKG_BUILD_DIR)/mt7615/mt7663s.ko
+  AUTOLOAD:=$(call AutoProbe,mt7663s)
+endef
+
+define KernelPackage/mt7663u
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7663u wireless driver
+  DEPENDS+=+kmod-mt76-usb +kmod-mt7615-common +kmod-mt7663-usb-sdio
+  FILES:= $(PKG_BUILD_DIR)/mt7615/mt7663u.ko
+  AUTOLOAD:=$(call AutoProbe,mt7663u)
+endef
+
+define KernelPackage/mt7915-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7915 firmware
+  DEPENDS+=+kmod-mt7915e
+endef
+
+define KernelPackage/mt7915e
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7915e wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt76-connac +kmod-hwmon-core +kmod-thermal +@DRIVER_11AX_SUPPORT +@KERNEL_RELAY
+  FILES:= $(PKG_BUILD_DIR)/mt7915/mt7915e.ko
+  AUTOLOAD:=$(call AutoProbe,mt7915e)
+endef
+
+define KernelPackage/mt7916-firmware
+  $(KernelPackage/mt76-default)
+  DEPENDS+=+kmod-mt7915e
+  TITLE:=MediaTek MT7916 firmware
+endef
+
+define KernelPackage/mt7981-firmware
+  $(KernelPackage/mt76-default)
+  DEPENDS:=@TARGET_mediatek_filogic
+  TITLE:=MediaTek MT7981 firmware
+endef
+
+define KernelPackage/mt7986-firmware
+  $(KernelPackage/mt76-default)
+  DEPENDS:=@TARGET_mediatek_filogic
+  TITLE:=MediaTek MT7986 firmware
+endef
+
+define KernelPackage/mt7921-firmware
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7921 firmware
+endef
+
+define KernelPackage/mt7922-firmware
+  $(KernelPackage/mt76-default)
+  DEPENDS+=+kmod-mt7921-common
+  TITLE:=MediaTek MT7922 firmware
+endef
+
+define KernelPackage/mt7921-common
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7615 wireless driver common code
+  HIDDEN:=1
+  DEPENDS+=+kmod-mt76-connac +kmod-mt7921-firmware +@DRIVER_11AX_SUPPORT
+  FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921-common.ko
+endef
+
+define KernelPackage/mt7921u
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7921U wireless driver
+  DEPENDS+=+kmod-mt76-usb +kmod-mt7921-common
+  FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921u.ko
+  AUTOLOAD:=$(call AutoProbe,mt7921u)
+endef
+
+define KernelPackage/mt7921s
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7921S wireless driver
+  DEPENDS+=+kmod-mt76-sdio +kmod-mt7921-common
+  FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921s.ko
+  AUTOLOAD:=$(call AutoProbe,mt7921s)
+endef
+
+define KernelPackage/mt7921e
+  $(KernelPackage/mt76-default)
+  TITLE:=MediaTek MT7921e wireless driver
+  DEPENDS+=@PCI_SUPPORT +kmod-mt7921-common
+  FILES:= $(PKG_BUILD_DIR)/mt7921/mt7921e.ko
+  AUTOLOAD:=$(call AutoProbe,mt7921e)
+endef
+
+define Package/mt76-test
+  SECTION:=devel
+  CATEGORY:=Development
+  TITLE:=mt76 testmode CLI
+  DEPENDS:=kmod-mt76-core +libnl-tiny
+endef
+
+TARGET_CFLAGS += -I$(STAGING_DIR)/usr/include/libnl-tiny
+
+NOSTDINC_FLAGS := \
+	$(KERNEL_NOSTDINC_FLAGS) \
+	-I$(PKG_BUILD_DIR) \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport \
+	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211 \
+	-include backport/autoconf.h \
+	-include backport/backport.h
+
+ifdef CONFIG_PACKAGE_MAC80211_MESH
+  NOSTDINC_FLAGS += -DCONFIG_MAC80211_MESH
+endif
+
+ifdef CONFIG_PACKAGE_CFG80211_TESTMODE
+  NOSTDINC_FLAGS += -DCONFIG_NL80211_TESTMODE
+  PKG_MAKE_FLAGS += CONFIG_NL80211_TESTMODE=y
+endif
+
+ifdef CONFIG_PACKAGE_kmod-mt76-usb
+  PKG_MAKE_FLAGS += CONFIG_MT76_USB=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x02-common
+  PKG_MAKE_FLAGS += CONFIG_MT76x02_LIB=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x02-usb
+  PKG_MAKE_FLAGS += CONFIG_MT76x02_USB=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x0-common
+  PKG_MAKE_FLAGS += CONFIG_MT76x0_COMMON=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x0e
+  PKG_MAKE_FLAGS += CONFIG_MT76x0E=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x0u
+  PKG_MAKE_FLAGS += CONFIG_MT76x0U=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x2-common
+  PKG_MAKE_FLAGS += CONFIG_MT76x2_COMMON=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x2
+  PKG_MAKE_FLAGS += CONFIG_MT76x2E=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76x2u
+  PKG_MAKE_FLAGS += CONFIG_MT76x2U=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7603
+  PKG_MAKE_FLAGS += CONFIG_MT7603E=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76-connac
+  PKG_MAKE_FLAGS += CONFIG_MT76_CONNAC_LIB=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt76-sdio
+  PKG_MAKE_FLAGS += CONFIG_MT76_SDIO=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7615-common
+  PKG_MAKE_FLAGS += CONFIG_MT7615_COMMON=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7615e
+  PKG_MAKE_FLAGS += CONFIG_MT7615E=m
+  ifdef CONFIG_TARGET_mediatek_mt7622
+    PKG_MAKE_FLAGS += CONFIG_MT7622_WMAC=y
+    NOSTDINC_FLAGS += -DCONFIG_MT7622_WMAC
+  endif
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7663-usb-sdio
+  PKG_MAKE_FLAGS += CONFIG_MT7663_USB_SDIO_COMMON=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7663s
+  PKG_MAKE_FLAGS += CONFIG_MT7663S=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7663u
+  PKG_MAKE_FLAGS += CONFIG_MT7663U=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7915e
+  PKG_MAKE_FLAGS += CONFIG_MT7915E=m
+  ifdef CONFIG_TARGET_mediatek_filogic
+    PKG_MAKE_FLAGS += CONFIG_MT798X_WMAC=y
+    NOSTDINC_FLAGS += -DCONFIG_MT798X_WMAC
+  endif
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7921-common
+  PKG_MAKE_FLAGS += CONFIG_MT7921_COMMON=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7921u
+  PKG_MAKE_FLAGS += CONFIG_MT7921U=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7921s
+  PKG_MAKE_FLAGS += CONFIG_MT7921S=m
+endif
+ifdef CONFIG_PACKAGE_kmod-mt7921e
+  PKG_MAKE_FLAGS += CONFIG_MT7921E=m
+endif
+
+define Build/Compile
+	+$(KERNEL_MAKE) $(PKG_JOBS) \
+		$(PKG_MAKE_FLAGS) \
+		M="$(PKG_BUILD_DIR)" \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		modules
+	$(MAKE) -C $(PKG_BUILD_DIR)/tools
+endef
+
+define Build/Install
+	:
+endef
+
+define Package/kmod-mt76/install
+	true
+endef
+
+define KernelPackage/mt76x0-common/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7610e.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt76x2-common/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7662_rom_patch.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7662.bin \
+		$(1)/lib/firmware
+endef
+
+define KernelPackage/mt76x0u/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	ln -sf mt7610e.bin $(1)/lib/firmware/mediatek/mt7610u.bin
+endef
+
+define KernelPackage/mt76x2u/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	ln -sf ../mt7662.bin $(1)/lib/firmware/mediatek/mt7662u.bin
+	ln -sf ../mt7662_rom_patch.bin $(1)/lib/firmware/mediatek/mt7662u_rom_patch.bin
+endef
+
+define KernelPackage/mt7603/install
+	$(INSTALL_DIR) $(1)/lib/firmware
+	cp $(if $(CONFIG_TARGET_ramips_mt76x8), \
+		$(PKG_BUILD_DIR)/firmware/mt7628_e1.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7628_e2.bin \
+		,\
+		$(PKG_BUILD_DIR)/firmware/mt7603_e1.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7603_e2.bin \
+		) \
+		$(1)/lib/firmware
+endef
+
+define KernelPackage/mt7615-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7615_cr4.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7615_n9.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7615_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7622-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7622_n9.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7622_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7663-firmware-ap/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7663_n9_rebb.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7663pr2h_rebb.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7663-firmware-sta/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7663_n9_v3.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7663pr2h.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7915-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7915_wa.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7915_wm.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7915_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7916-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7916_wa.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7916_wm.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7916_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7981-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7981_wa.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7981_wm.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7981_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7986-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/mt7986_wa.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7986_wm_mt7975.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7986_wm.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7986_rom_patch_mt7975.bin \
+		$(PKG_BUILD_DIR)/firmware/mt7986_rom_patch.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7921-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/WIFI_MT7961_patch_mcu_1_2_hdr.bin \
+		$(PKG_BUILD_DIR)/firmware/WIFI_RAM_CODE_MT7961_1.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define KernelPackage/mt7922-firmware/install
+	$(INSTALL_DIR) $(1)/lib/firmware/mediatek
+	cp \
+		$(PKG_BUILD_DIR)/firmware/WIFI_MT7922_patch_mcu_1_1_hdr.bin \
+		$(PKG_BUILD_DIR)/firmware/WIFI_RAM_CODE_MT7922_1.bin \
+		$(1)/lib/firmware/mediatek
+endef
+
+define Package/mt76-test/install
+	mkdir -p $(1)/usr/sbin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/tools/mt76-test $(1)/usr/sbin
+endef
+
+$(eval $(call KernelPackage,mt76-core))
+$(eval $(call KernelPackage,mt76-usb))
+$(eval $(call KernelPackage,mt76x02-usb))
+$(eval $(call KernelPackage,mt76x02-common))
+$(eval $(call KernelPackage,mt76x0-common))
+$(eval $(call KernelPackage,mt76x0e))
+$(eval $(call KernelPackage,mt76x0u))
+$(eval $(call KernelPackage,mt76x2-common))
+$(eval $(call KernelPackage,mt76x2u))
+$(eval $(call KernelPackage,mt76x2))
+$(eval $(call KernelPackage,mt7603))
+$(eval $(call KernelPackage,mt76-connac))
+$(eval $(call KernelPackage,mt76-sdio))
+$(eval $(call KernelPackage,mt7615-common))
+$(eval $(call KernelPackage,mt7615-firmware))
+$(eval $(call KernelPackage,mt7622-firmware))
+$(eval $(call KernelPackage,mt7615e))
+$(eval $(call KernelPackage,mt7663-firmware-ap))
+$(eval $(call KernelPackage,mt7663-firmware-sta))
+$(eval $(call KernelPackage,mt7663-usb-sdio))
+$(eval $(call KernelPackage,mt7663u))
+$(eval $(call KernelPackage,mt7663s))
+$(eval $(call KernelPackage,mt7915-firmware))
+$(eval $(call KernelPackage,mt7915e))
+$(eval $(call KernelPackage,mt7916-firmware))
+$(eval $(call KernelPackage,mt7981-firmware))
+$(eval $(call KernelPackage,mt7986-firmware))
+$(eval $(call KernelPackage,mt7921-firmware))
+$(eval $(call KernelPackage,mt7922-firmware))
+$(eval $(call KernelPackage,mt7921-common))
+$(eval $(call KernelPackage,mt7921u))
+$(eval $(call KernelPackage,mt7921s))
+$(eval $(call KernelPackage,mt7921e))
+$(eval $(call KernelPackage,mt76))
+$(eval $(call BuildPackage,mt76-test))

6.6/package/kernel/mt76/patches/001-allow-vht-on-2g.patch

@@ -0,0 +1,59 @@
+From ed0b9c38becdbf9379787ca0b4db557f03a31dd7 Mon Sep 17 00:00:00 2001
+From: DENG Qingfang <dengqf6@mail2.sysu.edu.cn>
+Date: Mon, 23 Nov 2020 10:46:37 +0800
+Subject: [PATCH] mt76: allow VHT rate on 2.4GHz
+
+Allow chips that support 11ac to use 256QAM on 2.4GHz
+
+Signed-off-by: DENG Qingfang <dqfext@gmail.com>
+---
+ mac80211.c | 10 +++++-----
+ 1 file changed, 5 insertions(+), 5 deletions(-)
+
+diff --git a/mac80211.c b/mac80211.c
+index 766681a4..06aa4228 100644
+--- a/mac80211.c
++++ b/mac80211.c
+@@ -282,7 +282,7 @@ static void mt76_init_stream_cap(struct mt76_phy *phy,
+ void mt76_set_stream_caps(struct mt76_phy *phy, bool vht)
+ {
+ 	if (phy->cap.has_2ghz)
+-		mt76_init_stream_cap(phy, &phy->sband_2g.sband, false);
++		mt76_init_stream_cap(phy, &phy->sband_2g.sband, vht);
+ 	if (phy->cap.has_5ghz)
+ 		mt76_init_stream_cap(phy, &phy->sband_5g.sband, vht);
+ 	if (phy->cap.has_6ghz)
+@@ -349,13 +349,13 @@ mt76_init_sband(struct mt76_phy *phy, struct mt76_sband *msband,
+ 
+ static int
+ mt76_init_sband_2g(struct mt76_phy *phy, struct ieee80211_rate *rates,
+-		   int n_rates)
++		   int n_rates, bool vht)
+ {
+ 	phy->hw->wiphy->bands[NL80211_BAND_2GHZ] = &phy->sband_2g.sband;
+ 
+ 	return mt76_init_sband(phy, &phy->sband_2g, mt76_channels_2ghz,
+ 			       ARRAY_SIZE(mt76_channels_2ghz), rates,
+-			       n_rates, true, false);
++			       n_rates, true, vht);
+ }
+ 
+ static int
+@@ -508,7 +508,7 @@ int mt76_register_phy(struct mt76_phy *phy, bool vht,
+ 		return ret;
+ 
+ 	if (phy->cap.has_2ghz) {
+-		ret = mt76_init_sband_2g(phy, rates, n_rates);
++		ret = mt76_init_sband_2g(phy, rates, n_rates, vht);
+ 		if (ret)
+ 			return ret;
+ 	}
+@@ -691,7 +691,7 @@ int mt76_register_device(struct mt76_dev *dev, bool vht,
+ 		return ret;
+ 
+ 	if (phy->cap.has_2ghz) {
+-		ret = mt76_init_sband_2g(phy, rates, n_rates);
++		ret = mt76_init_sband_2g(phy, rates, n_rates, vht);
+ 		if (ret)
+ 			return ret;
+ 	}

6.6/package/kernel/r2ec/Makefile

@@ -0,0 +1,33 @@
+#
+# Copyright (C) 2008-2012 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=r2ec
+PKG_RELEASE:=1
+PKG_LICENSE:=GPL-2.0
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/r2ec
+	SUBMENU:=Other modules
+	TITLE:=STM32 R2EC (Router to Embedded board Communication) Driver
+	FILES:=$(PKG_BUILD_DIR)/r2ec.ko
+	AUTOLOAD:=$(call AutoLoad,30,r2ec,1)
+#	DEPENDS:=@TARGET_ipq40xx @LINUX_5_4
+	DEPENDS:=@TARGET_ipq40xx
+	KCONFIG:=
+endef
+
+MAKE_OPTS:= $(KERNEL_MAKE_FLAGS) M="$(PKG_BUILD_DIR)"
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" $(MAKE_OPTS) modules
+endef
+
+$(eval $(call KernelPackage,r2ec))

6.6/package/kernel/r2ec/src/Makefile

@@ -0,0 +1 @@
+obj-m += r2ec.o

6.6/package/kernel/r2ec/src/io.h

@@ -0,0 +1,60 @@
+#ifndef R2EC_IO_H
+#define R2EC_IO_H
+
+#define NO_OF_GPIOS 37
+
+enum proto_version {
+  PROTO_VERSION_1 = 0x01,
+  PROTO_VERSION_2 = 0x02
+};
+
+enum cmd_type_id {
+  CMD_GPIO = 0x06,
+  CMD_PROTO = 0xFC,
+  CMD_FW = 0xFD,
+  CMD_BOOT = 0xFE
+};
+
+enum proto_id {
+  PROTO_GET_SUPPORTED = 0x03
+};
+
+enum boot_id {
+  BOOT_START_APP = 0x03,
+  BOOT_STATE = 0xFD,
+  BOOT_VERSION = 0xFE
+};
+
+enum state_id {
+  NO_IMAGE_FOUND = 0x17,
+  BOOT_STARTED = 0x18,
+  WATCHDOG_RESET = 0x1B,
+  APPLICATION_START_FAIL = 0x99,
+  HARD_FAULT_ERROR = 0x9A,
+  APP_STARTED = 0xFC,
+  NO_DATA_AVAILABLE = 0xFF
+};
+
+enum ack_id {
+  STATUS_ACK = 0x7D,
+  STATUS_NACK = 0x7E
+};
+
+enum gpio_state {
+  GPIO_STATE_HIGH = 0x1E,
+  GPIO_STATE_LOW = 0x9F
+};
+
+enum gpio_mode {
+  GPIO_VALUE_SET_LOW = 0x00,
+  GPIO_VALUE_SET_HIGH = 0x01,
+  GPIO_VALUE_GET = 0x02,
+  GPIO_MODE_SET_OUTPUT = 0x04,
+  GPIO_MODE_SET_INPUT = 0x05
+};
+
+enum fw_id {
+  FW_VERSION = 0x01
+};
+
+#endif // R2EC_IO_H

6.6/package/kernel/r2ec/src/r2ec.c

@@ -0,0 +1,752 @@
+#include <linux/module.h>
+#include <linux/gpio/driver.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+#include "io.h"
+
+static const struct i2c_device_id r2ec_id[] = {
+  { "stm32v1", NO_OF_GPIOS },
+  { }
+};
+MODULE_DEVICE_TABLE(i2c, r2ec_id);
+
+static const struct of_device_id r2ec_of_table[] = {
+  { .compatible = "tlt,stm32v1" },
+  { }
+};
+MODULE_DEVICE_TABLE(of, r2ec_of_table);
+
+static uint8_t g_proto;
+
+struct r2ec {
+  struct gpio_chip chip;
+  struct irq_chip irqchip;
+  struct i2c_client *client;
+  struct mutex i2c_lock;
+  struct mutex irq_lock;
+  int ic_ready;
+};
+
+struct r2ec_platform_data {
+  unsigned gpio_base;
+
+  int (*setup)(struct i2c_client *client, int gpio, unsigned ngpio,
+         void *context);
+
+  int (*teardown)(struct i2c_client *client, int gpio, unsigned ngpio,
+      void *context);
+
+  void *context;
+};
+
+struct i2c_request {
+  uint8_t version;
+  uint16_t length;
+  uint8_t command;
+  uint8_t data[1];
+  // uint8_t checksum; // invisible
+} __attribute__((packed));
+
+struct i2c_response {
+  uint8_t version;
+  uint8_t length;
+  uint8_t command;
+  uint8_t data[7];
+  uint8_t checksum;
+} __attribute__((packed));
+
+static uint8_t calc_crc8(const uint8_t *data, size_t len)
+{
+  uint8_t crc = 0xFF;
+  int i = 0;
+  int j = 0;
+
+  for (j = 0; j < len; j++) {
+    crc ^= data[j];
+
+    for (i = 0; i < 8; i++) {
+      crc = (crc & 0x80) ? (crc ^ 0xD5) << 1 : crc << 1;
+    }
+  }
+
+  return crc;
+}
+
+// generate outcoming mesage checksum and write i2c data
+static int stm32_write(struct i2c_client *client, uint8_t ver, uint8_t cmd, uint8_t *data, size_t len)
+{
+  struct i2c_request *req = NULL;
+  const int tmp_len = sizeof(struct i2c_request) + 1;
+  uint8_t tmp[sizeof(struct i2c_request) + 1];
+  int err = 0;
+
+  if (!client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+  req = (struct i2c_request *)tmp;
+  req->version = ver;
+  req->length  = 2 + len; // 2 + data_len
+  req->command = cmd;
+
+  memcpy(req->data, data, len);
+
+  req->data[len] = calc_crc8(tmp, tmp_len - 1);
+
+  if ((err = i2c_master_send(client, tmp, tmp_len)) < 0) {
+    return err;
+  }
+
+  return 0;
+}
+
+// attempt to read i2c data
+static int stm32_read(struct i2c_client *client, uint8_t *data, size_t len)
+{
+  char buffer[64] = { 0 };
+  uint8_t checksum;
+  int err;
+  unsigned i, cnt = 0;
+
+  if (!client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+retry:
+  if ((err = i2c_master_recv(client, data, len)) < 0) {
+    if (err == -ETIMEDOUT && cnt < 10) {
+      cnt++;
+      msleep(10);
+      goto retry;
+    }
+    return err;
+  }
+
+  if (len == 1) {
+    return 0;
+  }
+
+  // ignore checksum on partial i2c response
+  if (len == sizeof(struct i2c_response) - 1) {
+    return 0;
+  }
+
+  // 0xFF - no data available
+  if (*(data + 3) == 0xFF) {
+    return -ENODATA;
+  }
+
+  // generate checksum and verify
+  checksum = calc_crc8(data, len - 1);
+
+  if (checksum != *(data + len - 1)) {
+    for (i = 0; i < len; i++) {
+      snprintf(buffer + strlen(buffer), sizeof(buffer),
+         "%02X ", *(data + i));
+    }
+
+    dev_err(&client->dev, "Checksum of incoming message "
+              "does not match!\n"
+              "Received: %s\n", buffer);
+
+    // for some reason checksum might appear as 1st byte in the
+    //  data buffer, and actual checksum byte is zero
+    // apply quirk - discard first byte, skip checksum checking
+    if (!*(data + len - 1)) {
+      dev_err(&client->dev,
+        "Applying wrong-checksum quirk...\n");
+      memmove(data, data + 1, len - 1);
+      return 0;
+    }
+
+    return -EBADE;
+  }
+
+  return 0;
+}
+
+// attempt to retrieve supported protocol version, then retrieve device state
+//  and boot into application state
+// this is done without interrupt, so there should be delay after writing
+//  request and before reading response for protocol versions up until v2
+static int stm32_prepare(struct r2ec *gpio, struct i2c_client *client)
+{
+  struct i2c_response rsp;
+  uint8_t data[1], recv[1];
+  int ret;
+
+  memset(&rsp, 0, sizeof(rsp));
+
+  data[0] = PROTO_GET_SUPPORTED;
+
+  if ((ret = stm32_write(client, 1, CMD_PROTO, data, 1))) {
+    dev_err(&client->dev,
+      "stm32_prepare: proto version write failed (%d)\n",
+      ret);
+    return ret;
+  }
+
+  // due compatibility reasons delay is needed between write/read
+  //  operations
+  msleep(10);
+
+  if ((ret = stm32_read(client, (uint8_t *)&rsp, sizeof(rsp)))) {
+    dev_err(&client->dev,
+      "stm32_prepare: proto version read failed (%d)\n", ret);
+    return ret;
+  }
+
+  g_proto = rsp.data[1];
+
+  // fallback to version 1
+  if (g_proto != PROTO_VERSION_1 && g_proto != PROTO_VERSION_2) {
+    printk("STM32 fallback protocol: %u\n", g_proto);
+    g_proto = PROTO_VERSION_1;
+  }
+
+  printk("STM32 supported protocol: %u\n", g_proto);
+
+  data[0] = BOOT_STATE;
+
+  if ((ret = stm32_write(client, g_proto, CMD_BOOT, data, 1))) {
+    dev_err(&client->dev,
+      "stm32_prepare: boot state write failed (%d)\n", ret);
+    return ret;
+  }
+
+  if ((ret = stm32_read(client, recv, 1))) {
+    dev_err(&client->dev,
+      "stm32_prepare: boot state read failed (%d)\n", ret);
+    return ret;
+  }
+
+  // device might be not ready aka in bootloader state
+  // we might need to ignore gpio_write status value
+  gpio->ic_ready = 0;
+
+  // handle the following possible states reported either from
+  //  bootloader or system:
+  switch (recv[0]) {
+  case NO_IMAGE_FOUND:
+  case APP_STARTED:
+    // device is ready, no need to ignore gpio_write status value
+    // note: on no_image_found, user-space flasher will reflash
+    //  firmware and device will be rebooted
+    gpio->ic_ready = 1;
+    return 0;
+  case BOOT_STARTED:
+  case WATCHDOG_RESET:
+  case APPLICATION_START_FAIL:
+  case HARD_FAULT_ERROR:
+  case NO_DATA_AVAILABLE:
+    break;
+  default:
+    dev_err(&client->dev, "Device did not responded with correct "
+              "state! Actual response was 0x%02X. "
+              "Unable to get device state!\n", recv[0]);
+    break;
+  }
+
+  data[0] = BOOT_START_APP;
+
+  if ((ret = stm32_write(client, g_proto, CMD_BOOT, data, 1))) {
+    dev_err(&client->dev,
+      "stm32_prepare: boot start write failed (%d)\n", ret);
+    return ret;
+  }
+
+  if ((ret = stm32_read(client, recv, 1))) {
+    dev_err(&client->dev,
+      "stm32_prepare: boot start read failed (%d)\n", ret);
+    return ret;
+  }
+
+  if (recv[0] != STATUS_ACK && recv[0] != NO_DATA_AVAILABLE) {
+    dev_err(&client->dev, "Device did not responded with ACK. "
+              "Actual response was 0x%02X. "
+              "Unable to set device state!\n", recv[0]);
+    return -EIO;
+  }
+
+  return 0;
+}
+
+static int stm32_gpio_write(struct r2ec *gpio, int pin, int val)
+{
+  struct i2c_request *req;
+  size_t len = 2;
+  uint8_t tmp[sizeof(struct i2c_request) + 2];
+  //int err;
+
+  if (!gpio->client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+  req = (struct i2c_request *)tmp;
+  req->version = PROTO_VERSION_2;
+  req->length  = 2 + len; // command + crc + data
+  req->command = CMD_GPIO;
+  req->data[0] = pin;
+  req->data[1] = val;
+
+  i2c_master_send(gpio->client, tmp, sizeof(tmp));
+//  if ((err = i2c_master_send(gpio->client, tmp, sizeof(tmp))) < 0) {
+//    if (err != -ENXIO) {
+//      return err;
+//    }
+
+    // we need to ignore errors while device is not ready
+    // otherwise none of GPIOs/LEDs will be probed by the kernel
+//    if (!gpio->ic_ready) {
+//      err = 0;
+//    }
+//
+//    return err;
+//  }
+
+  return 0;
+}
+
+static int stm32_gpio_read(struct r2ec *gpio, int pin, int val)
+{
+  struct i2c_request *req;
+  size_t len = 2;
+  uint8_t tmp[sizeof(struct i2c_request) + 2];
+  uint8_t recv[1];
+  int err;
+
+  if (!gpio->client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+  req = (struct i2c_request *)tmp;
+  req->version = PROTO_VERSION_2;
+  req->length  = 2 + len; // command + crc + data
+  req->command = CMD_GPIO;
+  req->data[0] = pin;
+  req->data[1] = val;
+
+  if ((err = i2c_master_send(gpio->client, tmp, sizeof(tmp))) < 0) {
+    return err;
+  }
+
+  if ((err = i2c_master_recv(gpio->client, recv, sizeof(recv))) < 0) {
+    return err;
+  }
+
+  switch (recv[0]) {
+  case GPIO_STATE_HIGH:
+    return 1;
+  case GPIO_STATE_LOW:
+    return 0;
+  }
+
+  return -EIO;
+}
+
+static int r2ec_get(struct gpio_chip *chip, unsigned offset)
+{
+  struct r2ec *gpio = gpiochip_get_data(chip);
+  int value;
+
+  mutex_lock(&gpio->i2c_lock);
+  value = stm32_gpio_read(gpio, offset, GPIO_VALUE_GET);
+  mutex_unlock(&gpio->i2c_lock);
+
+  return value;
+}
+
+static void r2ec_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+  struct r2ec *gpio = gpiochip_get_data(chip);
+  int val = value ? GPIO_VALUE_SET_HIGH : GPIO_VALUE_SET_LOW;
+
+  mutex_lock(&gpio->i2c_lock);
+  stm32_gpio_write(gpio, offset, val);
+  mutex_unlock(&gpio->i2c_lock);
+}
+
+static int r2ec_input(struct gpio_chip *chip, unsigned offset)
+{
+  struct r2ec *gpio = gpiochip_get_data(chip);
+  int status;
+
+  mutex_lock(&gpio->i2c_lock);
+  status = stm32_gpio_write(gpio, offset, GPIO_MODE_SET_INPUT);
+  mutex_unlock(&gpio->i2c_lock);
+
+  return status;
+}
+
+static int r2ec_output(struct gpio_chip *chip, unsigned offset, int value)
+{
+  struct r2ec *gpio = gpiochip_get_data(chip);
+  int status;
+
+  mutex_lock(&gpio->i2c_lock);
+  status = stm32_gpio_write(gpio, offset, GPIO_MODE_SET_OUTPUT);
+  mutex_unlock(&gpio->i2c_lock);
+
+  r2ec_set(chip, offset, value);
+
+  return status;
+}
+
+static void noop(struct irq_data *data) { }
+
+static int noop_wake(struct irq_data *data, unsigned on)
+{
+  return 0;
+}
+
+static irqreturn_t r2ec_irq(int irq, void *data)
+{
+  struct r2ec *gpio = data;
+  unsigned i;
+
+  for (i = 0; i < gpio->chip.ngpio; i++) {
+    handle_nested_irq(irq_find_mapping(gpio->chip.irq.domain, i));
+  }
+
+  return IRQ_HANDLED;
+}
+
+static void r2ec_irq_bus_lock(struct irq_data *data)
+{
+  struct r2ec *gpio = irq_data_get_irq_chip_data(data);
+  mutex_lock(&gpio->irq_lock);
+}
+
+static void r2ec_irq_bus_sync_unlock(struct irq_data *data)
+{
+  struct r2ec *gpio = irq_data_get_irq_chip_data(data);
+  mutex_unlock(&gpio->irq_lock);
+}
+
+static int chip_label_match(struct gpio_chip *chip, void *data)
+{
+  return !strcmp(chip->label, data);
+}
+
+static int get_stm32_version(struct device *dev, uint8_t type, char *buffer)
+{
+  struct gpio_chip *chip;
+  struct r2ec *gpio;
+  uint8_t recv[sizeof(struct i2c_response)];
+  uint8_t data[1];
+  int ret;
+
+  struct pt_fw_get_ver {
+    unsigned char command_ex;
+    unsigned char major;
+    unsigned char middle;
+    unsigned char minor;
+    unsigned char rev;
+  } __attribute__((packed)) *res;
+
+  chip = gpiochip_find("stm32v1", chip_label_match);
+  if (!chip) {
+    printk(KERN_ERR "Unable to find R2EC gpio chip!\n");
+    return -ENXIO;
+  }
+
+  gpio = gpiochip_get_data(chip);
+
+  if (!gpio->client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+  data[0] = (type == CMD_FW) ? FW_VERSION : BOOT_VERSION;
+
+  mutex_lock(&gpio->i2c_lock);
+
+  if ((ret = stm32_write(gpio->client, g_proto, type, data, 1))) {
+    printk("%s: firmware version write failed (%d)\n",
+      __func__, ret);
+    goto done;
+  }
+
+  // prevent possible I2C bus lockup when master requests more than 1 byte
+  //  and slave only sends a couple of bytes, but master is still waiting
+  //  and SCL line is down; there is no recovery except power cycle
+  // first read 1 byte and compare with supported protocol versions
+  // if they match, then full messsage can be read, otherwise drop
+  //  everything to not introduce bus lockup
+  if ((ret = stm32_read(gpio->client, data, 1))) {
+    printk("%s: firmware version read failed (%d)\n",
+      __func__, ret);
+    goto done;
+  }
+
+  if (data[0] != PROTO_VERSION_1 && data[0] != PROTO_VERSION_2) {
+    goto done;
+  }
+
+  recv[0] = data[0];
+
+  if ((ret = stm32_read(gpio->client, &recv[1], sizeof(recv) - 1))) {
+    printk("%s: firmware version read failed (%d)\n",
+      __func__, ret);
+    goto done;
+  }
+
+  // device is ready now, running in application-mode
+  // this is called by autoflasher script first time
+  if (!gpio->ic_ready) {
+    gpio->ic_ready = 1;
+  }
+
+  res = (struct pt_fw_get_ver *)(&recv[3]);
+
+  sprintf(buffer, "%02d.%02d.%02d rev. %02d\n",
+    res->major, res->middle, res->minor, res->rev);
+
+done:
+  mutex_unlock(&gpio->i2c_lock);
+  return strlen(buffer);
+}
+
+static ssize_t app_version_show(struct device *dev,
+        struct device_attribute *attr, char *buffer)
+{
+  return get_stm32_version(dev, CMD_FW, buffer);
+}
+
+static ssize_t boot_version_show(struct device *dev,
+         struct device_attribute *attr, char *buffer)
+{
+  return get_stm32_version(dev, CMD_BOOT, buffer);
+}
+
+static ssize_t reset_store(struct device *dev, struct device_attribute *attr,
+         const char *buff, size_t count)
+{
+  struct gpio_chip *chip;
+  struct r2ec *gpio;
+  uint8_t data[1];
+
+  chip = gpiochip_find("stm32v1", chip_label_match);
+  if (!chip) {
+    printk(KERN_ERR "Unable to find R2EC gpio chip!\n");
+    return -ENXIO;
+  }
+
+  gpio = gpiochip_get_data(chip);
+
+  if (!gpio->client) {
+    printk(KERN_ERR "R2EC I2C client is not ready!\n");
+    return -ENXIO;
+  }
+
+  data[0] = BOOT_START_APP;
+
+  mutex_lock(&gpio->i2c_lock);
+  if (stm32_write(gpio->client, g_proto, CMD_BOOT, data, 1)) {
+    printk(KERN_ERR "Unable transmit R2EC data!\n");
+    goto done;
+  }
+
+done:
+  mutex_unlock(&gpio->i2c_lock);
+  return 1;
+}
+
+static struct device_attribute g_r2ec_kobj_attr[] = {
+  __ATTR_RO(app_version),
+  __ATTR_RO(boot_version),
+  __ATTR_WO(reset)
+};
+
+static struct attribute *g_r2ec_attrs[] = {
+  &g_r2ec_kobj_attr[0].attr,
+  &g_r2ec_kobj_attr[1].attr,
+  &g_r2ec_kobj_attr[2].attr,
+  NULL,
+};
+
+static struct attribute_group g_r2ec_attr_group = { .attrs = g_r2ec_attrs };
+static struct kobject *g_r2ec_kobj;
+
+static int r2ec_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+  struct r2ec_platform_data *pdata = dev_get_platdata(&client->dev);
+//  dev_err(&client->dev,
+//   "r2ec_probe: dev_get_platdata(0x%x, %s): 0x%x\n",
+//    client->addr, client->name, pdata);
+  struct r2ec *gpio;
+  struct gpio_irq_chip *girq;
+  int status, i;
+
+  gpio = devm_kzalloc(&client->dev, sizeof(*gpio), GFP_KERNEL);
+  if (!gpio) {
+    return -ENOMEM;
+  }
+
+  for (i = 0; i < 10; i++) {
+    if (!(status = stm32_prepare(gpio, client))) {
+      break;
+    }
+
+    dev_err(&client->dev,
+      "Unable to initialize device, retrying...\n");
+
+    // give some time for next interation...
+    msleep(500);
+  }
+
+  if (status) {
+    dev_err(&client->dev, "Unable to initialize device!\n");
+    devm_kfree(&client->dev, gpio);
+    return status;
+  }
+
+  mutex_init(&gpio->irq_lock);
+  mutex_init(&gpio->i2c_lock);
+
+  lockdep_set_subclass(&gpio->i2c_lock,
+           i2c_adapter_depth(client->adapter));
+
+  gpio->chip.base = pdata ? pdata->gpio_base : -1;
+  gpio->chip.can_sleep = true;
+  gpio->chip.parent = &client->dev;
+  gpio->chip.owner = THIS_MODULE;
+  gpio->chip.get = r2ec_get;
+  gpio->chip.set = r2ec_set;
+  gpio->chip.direction_input = r2ec_input;
+  gpio->chip.direction_output = r2ec_output;
+  gpio->chip.ngpio = id->driver_data;
+  gpio->chip.label = client->name;
+  gpio->client = client;
+
+  i2c_set_clientdata(client, gpio);
+
+  if (client->irq) {
+    gpio->irqchip.name = "r2ec";
+    gpio->irqchip.irq_enable = noop,
+    gpio->irqchip.irq_disable = noop,
+    gpio->irqchip.irq_ack = noop,
+    gpio->irqchip.irq_mask = noop,
+    gpio->irqchip.irq_unmask = noop,
+    gpio->irqchip.irq_set_wake = noop_wake,
+    gpio->irqchip.irq_bus_lock = r2ec_irq_bus_lock;
+    gpio->irqchip.irq_bus_sync_unlock = r2ec_irq_bus_sync_unlock;
+
+    girq = &gpio->chip.irq;
+    girq->chip = &gpio->irqchip;
+    /* This will let us handle the parent IRQ in the driver */
+    girq->parent_handler = NULL;
+    girq->num_parents = 0;
+    girq->parents = NULL;
+    girq->default_type = IRQ_TYPE_NONE;
+    girq->handler = handle_bad_irq;
+    girq->threaded = true;
+
+    status = devm_gpiochip_add_data(&client->dev, &gpio->chip, gpio);
+    
+    if (status) {
+      dev_err(&client->dev, "cannot add irqchip\n");
+      goto fail;
+    }
+
+    status = devm_request_threaded_irq(&client->dev, client->irq,
+               NULL, r2ec_irq,
+               IRQF_ONESHOT |
+               IRQF_TRIGGER_FALLING |
+               IRQF_SHARED,
+               dev_name(&client->dev),
+               gpio);
+    if (status) {
+      goto fail;
+    }
+  }
+
+  if (pdata && pdata->setup) {
+    status = pdata->setup(client, gpio->chip.base, gpio->chip.ngpio,
+              pdata->context);
+
+    if (status < 0) {
+      dev_warn(&client->dev, "setup --> %d\n", status);
+    }
+  }
+
+  dev_info(&client->dev, "probed\n");
+  return 0;
+
+fail:
+  devm_kfree(&client->dev, gpio);
+  dev_dbg(&client->dev, "probe error %d for %s\n", status, client->name);
+  return status;
+}
+
+static void r2ec_remove(struct i2c_client *client)
+{
+  struct r2ec_platform_data *pdata = dev_get_platdata(&client->dev);
+  struct r2ec *gpio = i2c_get_clientdata(client);
+  int status = 0;
+
+  if (pdata && pdata->teardown) {
+    status = pdata->teardown(client, gpio->chip.base, gpio->chip.ngpio,
+           pdata->context);
+
+    if (status < 0) {
+      dev_err(&client->dev, "%s --> %d\n", "teardown", status);
+    }
+  }
+}
+
+static struct i2c_driver r2ec_driver = {
+  .driver = {
+    .name  = "r2ec",
+    .of_match_table = of_match_ptr(r2ec_of_table),
+  },
+  .probe  = r2ec_probe,
+  .remove  = r2ec_remove,
+  .id_table = r2ec_id,
+};
+
+static int __init r2ec_init(void)
+{
+  int ret;
+
+  ret = i2c_add_driver(&r2ec_driver);
+  if (ret) {
+    printk(KERN_ERR "Unable to initialize `r2ec` driver!\n");
+    return ret;
+  }
+
+  g_r2ec_kobj = kobject_create_and_add("r2ec", NULL);
+  if (!g_r2ec_kobj) {
+    i2c_del_driver(&r2ec_driver);
+    printk(KERN_ERR "Unable to create `r2ec` kobject!\n");
+    return -ENOMEM;
+  }
+
+  if (sysfs_create_group(g_r2ec_kobj, &g_r2ec_attr_group)) {
+    kobject_put(g_r2ec_kobj);
+    i2c_del_driver(&r2ec_driver);
+    printk(KERN_ERR "Unable to create `r2ec` sysfs group!\n");
+    return -ENOMEM;
+  }
+
+  return 0;
+}
+
+static void __exit r2ec_exit(void)
+{
+  kobject_put(g_r2ec_kobj);
+  i2c_del_driver(&r2ec_driver);
+}
+
+module_init(r2ec_init);
+module_exit(r2ec_exit);
+
+MODULE_AUTHOR("Jokubas Maciulaitis <jokubas.maciulaitis@teltonika.lt>");
+MODULE_DESCRIPTION("STM32F0 (R2EC) I2C GPIO Expander driver");
+MODULE_LICENSE("GPL v2");

6.6/package/kernel/rtl8812au-ct/Makefile

@@ -0,0 +1,55 @@
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=rtl8812au-ct
+PKG_RELEASE=1
+
+PKG_LICENSE:=GPLv2
+PKG_LICENSE_FILES:=
+
+PKG_SOURCE_URL:=https://github.com/greearb/rtl8812AU_8821AU_linux.git
+PKG_MIRROR_HASH:=31e658df3e4d4c18c396259c2e0bef2bfc44a4aa870931f031a31e948be98af4
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_DATE:=2021-11-07
+PKG_SOURCE_VERSION:=39df55967b7de9f6c9600017b724303f95a8b9e2
+
+PKG_MAINTAINER:=Ben Greear <greearb@candelatech.com>
+PKG_BUILD_PARALLEL:=1
+#PKG_EXTMOD_SUBDIRS:=rtl8812au-ct
+
+STAMP_CONFIGURED_DEPENDS := $(STAGING_DIR)/usr/include/mac80211-backport/backport/autoconf.h
+
+include $(INCLUDE_DIR)/kernel.mk
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/rtl8812au-ct
+  SUBMENU:=Wireless Drivers
+  TITLE:=Driver for Realtek 8812 AU devices comfast 912-ac, etc
+  DEPENDS:=+kmod-cfg80211 +kmod-usb-core +@DRIVER_11AC_SUPPORT
+  FILES:=\
+	$(PKG_BUILD_DIR)/rtl8812au.ko
+  AUTOLOAD:=$(call AutoProbe,rtl8812au)
+  PROVIDES:=kmod-rtl8812au
+endef
+
+NOSTDINC_FLAGS := \
+	$(KERNEL_NOSTDINC_FLAGS) \
+	-I$(PKG_BUILD_DIR) \
+	-I$(PKG_BUILD_DIR)/include \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport \
+	-I$(STAGING_DIR)/usr/include/mac80211-backport/uapi \
+	-I$(STAGING_DIR)/usr/include/mac80211 \
+	-I$(STAGING_DIR)/usr/include/mac80211/uapi \
+	-include backport/backport.h \
+	-Wno-error=address \
+	-Wno-error=stringop-overread
+
+NOSTDINC_FLAGS+=-DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT -DBUILD_OPENWRT
+
+define Build/Compile
+	+$(KERNEL_MAKE) $(PKG_JOBS) \
+		M="$(PKG_BUILD_DIR)" \
+		NOSTDINC_FLAGS="$(NOSTDINC_FLAGS)" \
+		modules
+endef
+
+$(eval $(call KernelPackage,rtl8812au-ct))

6.6/package/kernel/rtl8812au-ct/patches/001-use-kernel-byteorder.patch

@@ -0,0 +1,15 @@
+Fix compile problem when rtw_byteorder.h and asm/byteorder.h gets 
+included in addition for example indirectly, do not use realtek own copy 
+of the byteorder headers.
+
+--- a/include/drv_types.h
++++ b/include/drv_types.h
+@@ -30,7 +30,7 @@
+ #include <drv_conf.h>
+ #include <basic_types.h>
+ #include <osdep_service.h>
+-#include <rtw_byteorder.h>
++#include <asm/byteorder.h>
+ #include <wlan_bssdef.h>
+ #include <wifi.h>
+ #include <ieee80211.h>

6.6/package/kernel/rtl8812au-ct/patches/002-vendor_command_policy.patch

@@ -0,0 +1,156 @@
+mac80211 from kernel 5.3 and later checks the new policy attribute.
+As this driver does not define any policies and does strange things, 
+just tell mac80211 to ignore the policies.
+
+--- a/os_dep/linux/rtw_cfgvendor.c
++++ b/os_dep/linux/rtw_cfgvendor.c
+@@ -1173,7 +1173,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = BRCM_VENDOR_SCMD_PRIV_STR
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_priv_string_handler
++		.doit = wl_cfgvendor_priv_string_handler,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ #if defined(GSCAN_SUPPORT) && 0
+ 	{
+@@ -1182,7 +1183,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_GET_CAPABILITIES
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_gscan_get_capabilities
++		.doit = wl_cfgvendor_gscan_get_capabilities,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1190,7 +1192,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_SET_CONFIG
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_set_scan_cfg
++		.doit = wl_cfgvendor_set_scan_cfg,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1198,7 +1201,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_SET_SCAN_CONFIG
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_set_batch_scan_cfg
++		.doit = wl_cfgvendor_set_batch_scan_cfg,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1206,7 +1210,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_ENABLE_GSCAN
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_initiate_gscan
++		.doit = wl_cfgvendor_initiate_gscan,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1214,7 +1219,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_ENABLE_FULL_SCAN_RESULTS
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_enable_full_scan_result
++		.doit = wl_cfgvendor_enable_full_scan_result,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1222,7 +1228,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_SET_HOTLIST
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_hotlist_cfg
++		.doit = wl_cfgvendor_hotlist_cfg,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1230,7 +1237,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_SET_SIGNIFICANT_CHANGE_CONFIG
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_significant_change_cfg
++		.doit = wl_cfgvendor_significant_change_cfg,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1238,7 +1246,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_GET_SCAN_RESULTS
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_gscan_get_batch_results
++		.doit = wl_cfgvendor_gscan_get_batch_results,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1246,7 +1255,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = GSCAN_SUBCMD_GET_CHANNEL_LIST
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_gscan_get_channel_list
++		.doit = wl_cfgvendor_gscan_get_channel_list,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ #endif /* GSCAN_SUPPORT */
+ #if defined(RTT_SUPPORT) && 0
+@@ -1256,7 +1266,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = RTT_SUBCMD_SET_CONFIG
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_rtt_set_config
++		.doit = wl_cfgvendor_rtt_set_config,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1264,7 +1275,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = RTT_SUBCMD_CANCEL_CONFIG
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_rtt_cancel_config
++		.doit = wl_cfgvendor_rtt_cancel_config,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1272,7 +1284,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = RTT_SUBCMD_GETCAPABILITY
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = wl_cfgvendor_rtt_get_capability
++		.doit = wl_cfgvendor_rtt_get_capability,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ #endif /* RTT_SUPPORT */
+ 	{
+@@ -1281,7 +1294,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = ANDR_WIFI_SUBCMD_GET_FEATURE_SET
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = rtw_cfgvendor_get_feature_set
++		.doit = rtw_cfgvendor_get_feature_set,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	},
+ 	{
+ 		{
+@@ -1289,7 +1303,8 @@ static const struct wiphy_vendor_command
+ 			.subcmd = ANDR_WIFI_SUBCMD_GET_FEATURE_SET_MATRIX
+ 		},
+ 		.flags = WIPHY_VENDOR_CMD_NEED_WDEV | WIPHY_VENDOR_CMD_NEED_NETDEV,
+-		.doit = rtw_cfgvendor_get_feature_set_matrix
++		.doit = rtw_cfgvendor_get_feature_set_matrix,
++		.policy = VENDOR_CMD_RAW_DATA,
+ 	}
+ };
+ 

6.6/package/kernel/rtl8812au-ct/patches/003-wireless-5.8.patch

@@ -0,0 +1,30 @@
+--- a/os_dep/linux/ioctl_cfg80211.c
++++ b/os_dep/linux/ioctl_cfg80211.c
+@@ -5177,6 +5177,15 @@ exit:
+ 	return ret;
+ }
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5, 8, 0)) || defined(BUILD_OPENWRT)
++static void cfg80211_rtw_update_mgmt_frame_registrations(struct wiphy *wiphy,
++						   struct wireless_dev *wdev,
++						   struct mgmt_frame_regs *upd)
++{
++
++}
++#endif
++ 
+ #if defined(CONFIG_TDLS) && (LINUX_VERSION_CODE >= KERNEL_VERSION(3,2,0))
+ static int cfg80211_rtw_tdls_mgmt(struct wiphy *wiphy,
+ 		struct net_device *ndev,
+@@ -5990,7 +5999,10 @@ static struct cfg80211_ops rtw_cfg80211_
+ 	.cancel_remain_on_channel = cfg80211_rtw_cancel_remain_on_channel,
+ #endif
+ 
+-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,8,0)) || defined(BUILD_OPENWRT)
++	.mgmt_tx = cfg80211_rtw_mgmt_tx,
++	.update_mgmt_frame_registrations = cfg80211_rtw_update_mgmt_frame_registrations,
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
+ 	.mgmt_tx = cfg80211_rtw_mgmt_tx,
+ #elif  (LINUX_VERSION_CODE>=KERNEL_VERSION(2,6,34) && LINUX_VERSION_CODE<=KERNEL_VERSION(2,6,35))
+ 	.action = cfg80211_rtw_mgmt_tx,

6.6/package/kernel/rtl8812au-ct/patches/004-remove-extern-inline.patch

@@ -0,0 +1,24 @@
+--- a/include/ieee80211.h
++++ b/include/ieee80211.h
+@@ -1313,18 +1313,18 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++__inline static int is_multicast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++__inline static int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 	        (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+ }
+ 
+-extern __inline int is_zero_mac_addr(const u8 *addr)
++__inline static int is_zero_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
+ 	        (addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));

6.6/package/kernel/rtl8812au-ct/patches/005-kernel-6.1.patch

@@ -0,0 +1,14 @@
+--- a/include/osdep_service_linux.h
++++ b/include/osdep_service_linux.h
+@@ -163,7 +163,11 @@ typedef void*		_thread_hdl_;
+ typedef int		thread_return;
+ typedef void*	thread_context;
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,17,0))
++#define thread_exit() kthread_complete_and_exit(NULL, 0)
++#else
+ #define thread_exit() complete_and_exit(NULL, 0)
++#endif
+ 
+ typedef void timer_hdl_return;
+ typedef void* timer_hdl_context;

6.6/package/kernel/rtl8812au-ct/patches/006-os_dep-osdep_service-use-new-get_random_u32.patch

@@ -0,0 +1,25 @@
+From e8f10b21abd8ae440632f561f8b65f37b4b55cc8 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 11:16:32 +0200
+Subject: [PATCH 1/5] os_dep/osdep_service: use new get_random_u32
+
+Drop prandom_u32 as got deprecated for get_random_u32.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ os_dep/osdep_service.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+--- a/os_dep/osdep_service.c
++++ b/os_dep/osdep_service.c
+@@ -2335,7 +2335,9 @@ u64 rtw_division64(u64 x, u64 y)
+ inline u32 rtw_random32(void)
+ {
+ #ifdef PLATFORM_LINUX
+-#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0))
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(6,1,0))
++	return get_random_u32();
++#elif (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0))
+ 	return prandom_u32();
+ #elif (LINUX_VERSION_CODE <= KERNEL_VERSION(2,6,18))
+ 	u32 random_int;

6.6/package/kernel/rtl8812au-ct/patches/007-treewide-fix-always-TRUE-condition-warning.patch

@@ -0,0 +1,72 @@
+From dc4024894c9deefc56f8dd6b2d2822b277f268a5 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 11:18:48 +0200
+Subject: [PATCH 2/5] treewide: fix always TRUE condition warning
+
+Fix always TRUE condition warning an drop redundant check.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ core/rtw_sta_mgt.c            |  3 +--
+ hal/OUTSRC/phydm_debug.c      | 16 ++++++----------
+ os_dep/linux/ioctl_cfg80211.c |  3 +--
+ 3 files changed, 8 insertions(+), 14 deletions(-)
+
+--- a/core/rtw_sta_mgt.c
++++ b/core/rtw_sta_mgt.c
+@@ -207,8 +207,7 @@ void rtw_mfree_stainfo(struct sta_info *
+ {
+ 	_func_enter_;
+ 
+-	if(&psta->lock != NULL)
+-		_rtw_spinlock_free(&psta->lock);
++	_rtw_spinlock_free(&psta->lock);
+ 
+ 	_rtw_free_sta_xmit_priv_lock(&psta->sta_xmitpriv);
+ 	_rtw_free_sta_recv_priv_lock(&psta->sta_recvpriv);
+--- a/hal/OUTSRC/phydm_debug.c
++++ b/hal/OUTSRC/phydm_debug.c
+@@ -870,12 +870,10 @@ phydm_cmd_parser(
+ 	case PHYDM_RA:
+ 
+ 		for(i=0; i<5; i++) {
+-			if(input[i+1]) {
+-				PHYDM_SSCANF(input[i+1], DCMD_DECIMAL, &var1[i]);
++			PHYDM_SSCANF(input[i+1], DCMD_DECIMAL, &var1[i]);
+ 
+-				PHYDM_SNPRINTF((output+used, out_len-used, "new SET, RA_var[%d]= (( %d ))\n", i , var1[i]));
+-				input_idx++;
+-			}
++			PHYDM_SNPRINTF((output+used, out_len-used, "new SET, RA_var[%d]= (( %d ))\n", i , var1[i]));
++			input_idx++;
+ 		}
+ 
+ 		if(input_idx>=1) {
+@@ -891,12 +889,10 @@ phydm_cmd_parser(
+ 	case PHYDM_PATHDIV:
+ 
+ 		for(i=0; i<5; i++) {
+-			if(input[i+1]) {
+-				PHYDM_SSCANF(input[i+1], DCMD_HEX, &var1[i]);
++			PHYDM_SSCANF(input[i+1], DCMD_HEX, &var1[i]);
+ 
+-				PHYDM_SNPRINTF((output+used, out_len-used, "new SET, PATHDIV_var[%d]= (( %d ))\n", i , var1[i]));
+-				input_idx++;
+-			}
++			PHYDM_SNPRINTF((output+used, out_len-used, "new SET, PATHDIV_var[%d]= (( %d ))\n", i , var1[i]));
++			input_idx++;
+ 		}
+ 
+ 		if(input_idx>=1) {
+--- a/os_dep/linux/ioctl_cfg80211.c
++++ b/os_dep/linux/ioctl_cfg80211.c
+@@ -2170,8 +2170,7 @@ static int cfg80211_rtw_scan(struct wiph
+ 
+ #ifdef CONFIG_P2P
+ 	if( pwdinfo->driver_interface == DRIVER_CFG80211 ) {
+-		if(ssids->ssid != NULL
+-		   && _rtw_memcmp(ssids->ssid, "DIRECT-", 7)
++		if(_rtw_memcmp(ssids->ssid, "DIRECT-", 7)
+ 		   && rtw_get_p2p_ie((u8 *)request->ie, request->ie_len, NULL, NULL)
+ 		  ) {
+ 			if(rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE)) {

6.6/package/kernel/rtl8812au-ct/patches/008-treewide-use-correct-type-for-tasklet_init.patch

@@ -0,0 +1,93 @@
+From 5f3bb5602615894cda88ca1b44fdfafdfb01c8c8 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 11:20:39 +0200
+Subject: [PATCH 3/5] treewide: use correct type for tasklet_init
+
+Update and use correct type for tasklet_init to fix compilation error
+for not valid cast.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ hal/hal_hci/hal_usb.c             | 2 +-
+ hal/rtl8812a/usb/rtl8812au_xmit.c | 2 +-
+ hal/rtl8812a/usb/usb_ops_linux.c  | 2 +-
+ include/rtl8812a_xmit.h           | 2 +-
+ include/usb_ops_linux.h           | 2 +-
+ os_dep/linux/usb_ops_linux.c      | 4 ++--
+ 6 files changed, 7 insertions(+), 7 deletions(-)
+
+--- a/hal/hal_hci/hal_usb.c
++++ b/hal/hal_hci/hal_usb.c
+@@ -35,7 +35,7 @@ int	usb_init_recv_priv(_adapter *padapte
+ 
+ #ifdef PLATFORM_LINUX
+ 	tasklet_init(&precvpriv->recv_tasklet,
+-	             (void(*)(unsigned long))usb_recv_tasklet,
++	             usb_recv_tasklet,
+ 	             (unsigned long)padapter);
+ #endif /* PLATFORM_LINUX */
+ 
+--- a/hal/rtl8812a/usb/rtl8812au_xmit.c
++++ b/hal/rtl8812a/usb/rtl8812au_xmit.c
+@@ -30,7 +30,7 @@ s32	rtl8812au_init_xmit_priv(_adapter *p
+ 
+ #ifdef PLATFORM_LINUX
+ 	tasklet_init(&pxmitpriv->xmit_tasklet,
+-	             (void(*)(unsigned long))rtl8812au_xmit_tasklet,
++	             rtl8812au_xmit_tasklet,
+ 	             (unsigned long)padapter);
+ #endif
+ #ifdef CONFIG_TX_EARLY_MODE
+--- a/hal/rtl8812a/usb/usb_ops_linux.c
++++ b/hal/rtl8812a/usb/usb_ops_linux.c
+@@ -475,7 +475,7 @@ _exit_recvbuf2recvframe:
+ }
+ 
+ 
+-void rtl8812au_xmit_tasklet(void *priv)
++void rtl8812au_xmit_tasklet(unsigned long priv)
+ {
+ 	int ret = _FALSE;
+ 	_adapter *padapter = (_adapter*)priv;
+--- a/include/rtl8812a_xmit.h
++++ b/include/rtl8812a_xmit.h
+@@ -331,7 +331,7 @@ s32 rtl8812au_hal_xmit(PADAPTER padapter
+ s32 rtl8812au_mgnt_xmit(PADAPTER padapter, struct xmit_frame *pmgntframe);
+ s32	 rtl8812au_hal_xmitframe_enqueue(_adapter *padapter, struct xmit_frame *pxmitframe);
+ s32 rtl8812au_xmit_buf_handler(PADAPTER padapter);
+-void rtl8812au_xmit_tasklet(void *priv);
++void rtl8812au_xmit_tasklet(unsigned long priv);
+ s32 rtl8812au_xmitframe_complete(_adapter *padapter, struct xmit_priv *pxmitpriv, struct xmit_buf *pxmitbuf);
+ #endif
+ 
+--- a/include/usb_ops_linux.h
++++ b/include/usb_ops_linux.h
+@@ -78,7 +78,7 @@ int usb_write16(struct intf_hdl *pintfhd
+ int usb_write32(struct intf_hdl *pintfhdl, u32 addr, u32 val);
+ int usb_writeN(struct intf_hdl *pintfhdl, u32 addr, u32 length, u8 *pdata);
+ u32 usb_read_port(struct intf_hdl *pintfhdl, u32 addr, u32 cnt, u8 *rmem);
+-void usb_recv_tasklet(void *priv);
++void usb_recv_tasklet(unsigned long priv);
+ 
+ #endif
+ 
+--- a/os_dep/linux/usb_ops_linux.c
++++ b/os_dep/linux/usb_ops_linux.c
+@@ -717,7 +717,7 @@ void usb_init_recvbuf(_adapter *padapter
+ int recvbuf2recvframe(PADAPTER padapter, void *ptr);
+ 
+ #ifdef CONFIG_USE_USB_BUFFER_ALLOC_RX
+-void usb_recv_tasklet(void *priv)
++void usb_recv_tasklet(unsigned long priv)
+ {
+ 	struct recv_buf *precvbuf = NULL;
+ 	_adapter	*padapter = (_adapter*)priv;
+@@ -870,7 +870,7 @@ u32 usb_read_port(struct intf_hdl *pintf
+ }
+ #else	// CONFIG_USE_USB_BUFFER_ALLOC_RX
+ 
+-void usb_recv_tasklet(void *priv)
++void usb_recv_tasklet(unsigned long priv)
+ {
+ 	_pkt			*pskb;
+ 	_adapter		*padapter = (_adapter*)priv;

6.6/package/kernel/rtl8812au-ct/patches/009-treewide-drop-const-from-dev_addr.patch

@@ -0,0 +1,56 @@
+From 51ab9d6a959de87206731f941b1df39e5c5d63ea Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 11:21:49 +0200
+Subject: [PATCH 4/5] treewide: drop const from dev_addr
+
+dev_addr is not const and conflict with memcpy function. Fix compilation
+warning by casting dev_addr to void*.
+
+This operation is safe as this is done before netdev register.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ os_dep/linux/os_intfs.c | 6 +++---
+ os_dep/osdep_service.c  | 2 +-
+ 2 files changed, 4 insertions(+), 4 deletions(-)
+
+--- a/os_dep/linux/os_intfs.c
++++ b/os_dep/linux/os_intfs.c
+@@ -1885,7 +1885,7 @@ int _netdev_if2_open(struct net_device *
+ 
+ 		_rtw_memcpy(padapter->eeprompriv.mac_addr, mac, ETH_ALEN);
+ 		rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr);
+-		_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++		_rtw_memcpy((void *)pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
+ 	}
+ #endif //CONFIG_PLATFORM_INTEL_BYT
+ 
+@@ -2254,7 +2254,7 @@ static int _rtw_drv_register_netdev(_ada
+ 	/* alloc netdev name */
+ 	rtw_init_netdev_name(pnetdev, name);
+ 
+-	_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++	_rtw_memcpy((void *)pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
+ 
+ 	/* Tell the network stack we exist */
+ 	if (register_netdev(pnetdev) != 0) {
+@@ -2334,7 +2334,7 @@ int _netdev_open(struct net_device *pnet
+ #ifdef CONFIG_PLATFORM_INTEL_BYT
+ 		rtw_macaddr_cfg(padapter->eeprompriv.mac_addr);
+ 		rtw_init_wifidirect_addrs(padapter, padapter->eeprompriv.mac_addr, padapter->eeprompriv.mac_addr);
+-		_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++		_rtw_memcpy((void *)pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
+ #endif //CONFIG_PLATFORM_INTEL_BYT
+ 
+ 		padapter->bDriverStopped = _FALSE;
+--- a/os_dep/osdep_service.c
++++ b/os_dep/osdep_service.c
+@@ -2209,7 +2209,7 @@ int rtw_change_ifname(_adapter *padapter
+ 
+ 	rtw_init_netdev_name(pnetdev, ifname);
+ 
+-	_rtw_memcpy(pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
++	_rtw_memcpy((void *)pnetdev->dev_addr, padapter->eeprompriv.mac_addr, ETH_ALEN);
+ 
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,26))
+ 	if(!rtnl_is_locked())

6.6/package/kernel/rtl8812au-ct/patches/010-os_dep-linux-proc-move-to-pde_data-function.patch

@@ -0,0 +1,26 @@
+From f455198acaa71c2963746a6b17c878c7d1d0e331 Mon Sep 17 00:00:00 2001
+From: Christian Marangi <ansuelsmth@gmail.com>
+Date: Sun, 30 Jul 2023 11:22:58 +0200
+Subject: [PATCH 5/5] os_dep/linux/proc: move to pde_data function
+
+PDE_DATA macro was dropped in 5.17 with the new pde_data that does the
+exact thing. Fix compilation error and use new function.
+
+Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
+---
+ os_dep/linux/rtw_proc.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/os_dep/linux/rtw_proc.c
++++ b/os_dep/linux/rtw_proc.c
+@@ -37,6 +37,10 @@ inline struct proc_dir_entry *get_rtw_dr
+ #define file_inode(file) ((file)->f_dentry->d_inode)
+ #endif
+ 
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(5,17,0))
++#define PDE_DATA(inode) pde_data(inode)
++#endif
++
+ #if (LINUX_VERSION_CODE < KERNEL_VERSION(3,10,0))
+ #define PDE_DATA(inode) PDE((inode))->data
+ #define proc_get_parent_data(inode) PDE((inode))->parent->data

6.6/package/kernel/rtl8812au-ct/patches/100-api_update.patch

@@ -0,0 +1,56 @@
+--- a/os_dep/linux/ioctl_cfg80211.c
++++ b/os_dep/linux/ioctl_cfg80211.c
+@@ -798,8 +798,8 @@ check_bss:
+ 
+ 		DBG_871X(FUNC_ADPT_FMT" call cfg80211_roamed\n", FUNC_ADPT_ARG(padapter));
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 12, 0)
+-		roam_info.channel = notify_channel;
+-		roam_info.bssid = cur_network->network.MacAddress;
++		roam_info.links[0].channel = notify_channel;
++		roam_info.links[0].bssid = cur_network->network.MacAddress;
+ 		roam_info.req_ie = pmlmepriv->assoc_req + sizeof(struct rtw_ieee80211_hdr_3addr) + 2;
+ 		roam_info.req_ie_len = pmlmepriv->assoc_req_len - sizeof(struct rtw_ieee80211_hdr_3addr) - 2;
+ 		roam_info.resp_ie = pmlmepriv->assoc_rsp + sizeof(struct rtw_ieee80211_hdr_3addr) + 6;
+@@ -1389,6 +1389,7 @@ exit:
+ 
+ static int cfg80211_rtw_add_key(struct wiphy *wiphy, struct net_device *ndev,
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++                                int link_id,
+                                 u8 key_index, bool pairwise, const u8 *mac_addr,
+ #else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
+                                 u8 key_index, const u8 *mac_addr,
+@@ -1529,6 +1530,7 @@ addkey_end:
+ 
+ static int cfg80211_rtw_get_key(struct wiphy *wiphy, struct net_device *ndev,
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++                                int link_id,
+                                 u8 key_index, bool pairwise, const u8 *mac_addr,
+ #else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
+                                 u8 key_index, const u8 *mac_addr,
+@@ -1562,6 +1564,7 @@ static int cfg80211_rtw_get_key(struct w
+ 
+ static int cfg80211_rtw_del_key(struct wiphy *wiphy, struct net_device *ndev,
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37)) || defined(COMPAT_KERNEL_RELEASE)
++                                int link_id,
+                                 u8 key_index, bool pairwise, const u8 *mac_addr)
+ #else	// (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,37))
+                                 u8 key_index, const u8 *mac_addr)
+@@ -1581,7 +1584,7 @@ static int cfg80211_rtw_del_key(struct w
+ }
+ 
+ static int cfg80211_rtw_set_default_key(struct wiphy *wiphy,
+-                                        struct net_device *ndev, u8 key_index
++                                        struct net_device *ndev, int link_id, u8 key_index
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,38)) || defined(COMPAT_KERNEL_RELEASE)
+                                         , bool unicast, bool multicast
+ #endif
+@@ -4019,7 +4022,8 @@ static int cfg80211_rtw_change_beacon(st
+ 	return ret;
+ }
+ 
+-static int cfg80211_rtw_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
++static int cfg80211_rtw_stop_ap(struct wiphy *wiphy, struct net_device *ndev,
++				unsigned int link_id)
+ {
+ 	DBG_871X(FUNC_NDEV_FMT"\n", FUNC_NDEV_ARG(ndev));
+ 	return 0;

6.6/package/libs/libnftnl/Makefile

@@ -0,0 +1,76 @@
+#
+# Copyright (C) 2014 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libnftnl
+PKG_CPE_ID:=cpe:/a:netfilter:libnftnl
+PKG_VERSION:=1.2.6
+PKG_RELEASE:=2
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=https://netfilter.org/projects/$(PKG_NAME)/files
+PKG_HASH:=ceeaea2cd92147da19f13a35a7f1a4bc2767ff897e838e4b479cf54b59c777f4
+
+PKG_MAINTAINER:=Steven Barth <steven@midlink.org>
+PKG_LICENSE:=GPL-2.0-or-later
+PKG_LICENSE_FILES:=COPYING
+
+PKG_INSTALL:=1
+PKG_BUILD_PARALLEL:=1
+PKG_BUILD_FLAGS:=lto
+PKG_FIXUP:=autoreconf
+
+include $(INCLUDE_DIR)/package.mk
+
+DISABLE_NLS:=
+
+define Package/libnftnl
+  SECTION:=libs
+  CATEGORY:=Libraries
+  DEPENDS:=+libmnl
+  TITLE:=Low-level netlink library for the nf_tables subsystem
+  URL:=http://www.netfilter.org/projects/libnftnl
+  ABI_VERSION:=11
+endef
+
+define Package/libnftnl/description
+ libnftnl is a userspace library providing a low-level netlink
+ programming interface (API) to the in-kernel nf_tables subsystem.
+endef
+
+TARGET_CFLAGS += $(FPIC)
+
+CONFIGURE_ARGS += \
+	--enable-static \
+	--enable-shared
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/libnftnl
+	$(CP) \
+		$(PKG_INSTALL_DIR)/usr/include/libnftnl/*.h \
+		$(1)/usr/include/libnftnl/
+
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) \
+		$(PKG_INSTALL_DIR)/usr/lib/libnftnl.{so*,a,la} \
+		$(1)/usr/lib/
+
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) \
+		$(PKG_INSTALL_DIR)/usr/lib/pkgconfig/libnftnl.pc \
+		$(1)/usr/lib/pkgconfig/
+endef
+
+define Package/libnftnl/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) \
+		$(PKG_INSTALL_DIR)/usr/lib/libnftnl.so.* \
+		$(1)/usr/lib/
+endef
+
+$(eval $(call BuildPackage,libnftnl))

6.6/package/libs/libnftnl/patches/999-01-libnftnl-add-fullcone-expression-support.patch

@@ -0,0 +1,254 @@
+From 6c39f04febd7cfdbd474233379416babcd0fc341 Mon Sep 17 00:00:00 2001
+From: Syrone Wong <wong.syrone@gmail.com>
+Date: Fri, 8 Apr 2022 23:52:11 +0800
+Subject: [PATCH] libnftnl: add fullcone expression support
+
+Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
+---
+ include/libnftnl/expr.h             |   6 +
+ include/linux/netfilter/nf_tables.h |  16 +++
+ src/Makefile.am                     |   1 +
+ src/expr/fullcone.c                 | 167 ++++++++++++++++++++++++++++
+ src/expr_ops.c                      |   2 +
+ 5 files changed, 192 insertions(+)
+ create mode 100644 src/expr/fullcone.c
+
+--- a/include/libnftnl/expr.h
++++ b/include/libnftnl/expr.h
+@@ -245,6 +245,12 @@ enum {
+ };
+ 
+ enum {
++	NFTNL_EXPR_FULLCONE_FLAGS		= NFTNL_EXPR_BASE,
++	NFTNL_EXPR_FULLCONE_REG_PROTO_MIN,
++	NFTNL_EXPR_FULLCONE_REG_PROTO_MAX,
++};
++
++enum {
+ 	NFTNL_EXPR_REDIR_REG_PROTO_MIN	= NFTNL_EXPR_BASE,
+ 	NFTNL_EXPR_REDIR_REG_PROTO_MAX,
+ 	NFTNL_EXPR_REDIR_FLAGS,
+--- a/include/linux/netfilter/nf_tables.h
++++ b/include/linux/netfilter/nf_tables.h
+@@ -1434,6 +1434,22 @@ enum nft_masq_attributes {
+ #define NFTA_MASQ_MAX		(__NFTA_MASQ_MAX - 1)
+ 
+ /**
++ * enum nft_fullcone_attributes - nf_tables fullcone expression attributes
++ *
++ * @NFTA_FULLCONE_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32)
++ * @NFTA_FULLCONE_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers)
++ * @NFTA_FULLCONE_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers)
++ */
++enum nft_fullcone_attributes {
++	NFTA_FULLCONE_UNSPEC,
++	NFTA_FULLCONE_FLAGS,
++	NFTA_FULLCONE_REG_PROTO_MIN,
++	NFTA_FULLCONE_REG_PROTO_MAX,
++	__NFTA_FULLCONE_MAX
++};
++#define NFTA_FULLCONE_MAX		(__NFTA_FULLCONE_MAX - 1)
++
++/**
+  * enum nft_redir_attributes - nf_tables redirect expression netlink attributes
+  *
+  * @NFTA_REDIR_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers)
+--- a/src/Makefile.am
++++ b/src/Makefile.am
+@@ -54,6 +54,7 @@ libnftnl_la_SOURCES = utils.c		\
+ 		      expr/target.c	\
+ 		      expr/tunnel.c	\
+ 		      expr/masq.c	\
++		      expr/fullcone.c	\
+ 		      expr/redir.c	\
+ 		      expr/hash.c	\
+ 		      expr/socket.c	\
+--- /dev/null
++++ b/src/expr/fullcone.c
+@@ -0,0 +1,168 @@
++/*
++ * (C) 2022 wongsyrone
++ *
++ * This program is free software; you can redistribute it and/or modify
++ * it under the terms of the GNU General Public License as published
++ * by the Free Software Foundation; either version 2 of the License, or
++ * (at your option) any later version.
++ */
++
++#include <stdio.h>
++#include <stdint.h>
++#include <arpa/inet.h>
++#include <errno.h>
++#include <inttypes.h>
++
++#include <linux/netfilter/nf_tables.h>
++
++#include "internal.h"
++#include <libmnl/libmnl.h>
++#include <libnftnl/expr.h>
++#include <libnftnl/rule.h>
++
++struct nftnl_expr_fullcone {
++	uint32_t		flags;
++	enum nft_registers	sreg_proto_min;
++	enum nft_registers	sreg_proto_max;
++};
++
++static int
++nftnl_expr_fullcone_set(struct nftnl_expr *e, uint16_t type,
++		       const void *data, uint32_t data_len)
++{
++	struct nftnl_expr_fullcone *fullcone = nftnl_expr_data(e);
++
++	switch (type) {
++	case NFTNL_EXPR_FULLCONE_FLAGS:
++		memcpy(&fullcone->flags, data, sizeof(fullcone->flags));
++		break;
++	case NFTNL_EXPR_FULLCONE_REG_PROTO_MIN:
++		memcpy(&fullcone->sreg_proto_min, data, sizeof(fullcone->sreg_proto_min));
++		break;
++	case NFTNL_EXPR_FULLCONE_REG_PROTO_MAX:
++		memcpy(&fullcone->sreg_proto_max, data, sizeof(fullcone->sreg_proto_max));
++		break;
++	default:
++		return -1;
++	}
++	return 0;
++}
++
++static const void *
++nftnl_expr_fullcone_get(const struct nftnl_expr *e, uint16_t type,
++		       uint32_t *data_len)
++{
++	struct nftnl_expr_fullcone *fullcone = nftnl_expr_data(e);
++
++	switch (type) {
++	case NFTNL_EXPR_FULLCONE_FLAGS:
++		*data_len = sizeof(fullcone->flags);
++		return &fullcone->flags;
++	case NFTNL_EXPR_FULLCONE_REG_PROTO_MIN:
++		*data_len = sizeof(fullcone->sreg_proto_min);
++		return &fullcone->sreg_proto_min;
++	case NFTNL_EXPR_FULLCONE_REG_PROTO_MAX:
++		*data_len = sizeof(fullcone->sreg_proto_max);
++		return &fullcone->sreg_proto_max;
++	}
++	return NULL;
++}
++
++static int nftnl_expr_fullcone_cb(const struct nlattr *attr, void *data)
++{
++	const struct nlattr **tb = data;
++	int type = mnl_attr_get_type(attr);
++
++	if (mnl_attr_type_valid(attr, NFTA_FULLCONE_MAX) < 0)
++		return MNL_CB_OK;
++
++	switch (type) {
++	case NFTA_FULLCONE_REG_PROTO_MIN:
++	case NFTA_FULLCONE_REG_PROTO_MAX:
++	case NFTA_FULLCONE_FLAGS:
++		if (mnl_attr_validate(attr, MNL_TYPE_U32) < 0)
++			abi_breakage();
++		break;
++	}
++
++	tb[type] = attr;
++	return MNL_CB_OK;
++}
++
++static void
++nftnl_expr_fullcone_build(struct nlmsghdr *nlh, const struct nftnl_expr *e)
++{
++	struct nftnl_expr_fullcone *fullcone = nftnl_expr_data(e);
++
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_FLAGS))
++		mnl_attr_put_u32(nlh, NFTA_FULLCONE_FLAGS, htobe32(fullcone->flags));
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MIN))
++		mnl_attr_put_u32(nlh, NFTA_FULLCONE_REG_PROTO_MIN,
++				 htobe32(fullcone->sreg_proto_min));
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MAX))
++		mnl_attr_put_u32(nlh, NFTA_FULLCONE_REG_PROTO_MAX,
++				 htobe32(fullcone->sreg_proto_max));
++}
++
++static int
++nftnl_expr_fullcone_parse(struct nftnl_expr *e, struct nlattr *attr)
++{
++	struct nftnl_expr_fullcone *fullcone = nftnl_expr_data(e);
++	struct nlattr *tb[NFTA_FULLCONE_MAX+1] = {};
++
++	if (mnl_attr_parse_nested(attr, nftnl_expr_fullcone_cb, tb) < 0)
++		return -1;
++
++	if (tb[NFTA_FULLCONE_FLAGS]) {
++		fullcone->flags = be32toh(mnl_attr_get_u32(tb[NFTA_FULLCONE_FLAGS]));
++		e->flags |= (1 << NFTNL_EXPR_FULLCONE_FLAGS);
++        }
++	if (tb[NFTA_FULLCONE_REG_PROTO_MIN]) {
++		fullcone->sreg_proto_min =
++			be32toh(mnl_attr_get_u32(tb[NFTA_FULLCONE_REG_PROTO_MIN]));
++		e->flags |= (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MIN);
++	}
++	if (tb[NFTA_FULLCONE_REG_PROTO_MAX]) {
++		fullcone->sreg_proto_max =
++			be32toh(mnl_attr_get_u32(tb[NFTA_FULLCONE_REG_PROTO_MAX]));
++		e->flags |= (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MAX);
++	}
++
++	return 0;
++}
++
++static int nftnl_expr_fullcone_snprintf(char *buf, size_t remain,
++				    uint32_t flags, const struct nftnl_expr *e)
++{
++	struct nftnl_expr_fullcone *fullcone = nftnl_expr_data(e);
++	int offset = 0, ret = 0;
++
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MIN)) {
++		ret = snprintf(buf + offset, remain, "proto_min reg %u ",
++			       fullcone->sreg_proto_min);
++		SNPRINTF_BUFFER_SIZE(ret, remain, offset);
++	}
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_REG_PROTO_MAX)) {
++		ret = snprintf(buf + offset, remain, "proto_max reg %u ",
++			       fullcone->sreg_proto_max);
++		SNPRINTF_BUFFER_SIZE(ret, remain, offset);
++	}
++	if (e->flags & (1 << NFTNL_EXPR_FULLCONE_FLAGS)) {
++		ret = snprintf(buf + offset, remain, "flags 0x%x ", fullcone->flags);
++		SNPRINTF_BUFFER_SIZE(ret, remain, offset);
++	}
++
++	return offset;
++}
++
++struct expr_ops expr_ops_fullcone = {
++	.name		= "fullcone",
++	.alloc_len	= sizeof(struct nftnl_expr_fullcone),
++	.max_attr	= NFTA_FULLCONE_MAX,
++	.set		= nftnl_expr_fullcone_set,
++	.get		= nftnl_expr_fullcone_get,
++	.parse		= nftnl_expr_fullcone_parse,
++	.build		= nftnl_expr_fullcone_build,
++	.output		= nftnl_expr_fullcone_snprintf,
++};
++
+--- a/src/expr_ops.c
++++ b/src/expr_ops.c
+@@ -19,6 +19,7 @@ extern struct expr_ops expr_ops_limit;
+ extern struct expr_ops expr_ops_log;
+ extern struct expr_ops expr_ops_lookup;
+ extern struct expr_ops expr_ops_masq;
++extern struct expr_ops expr_ops_fullcone;
+ extern struct expr_ops expr_ops_match;
+ extern struct expr_ops expr_ops_meta;
+ extern struct expr_ops expr_ops_ng;
+@@ -63,6 +64,7 @@ static struct expr_ops *expr_ops[] = {
+ 	&expr_ops_log,
+ 	&expr_ops_lookup,
+ 	&expr_ops_masq,
++	&expr_ops_fullcone,
+ 	&expr_ops_match,
+ 	&expr_ops_meta,
+ 	&expr_ops_ng,

6.6/package/network/config/firewall4/patches/990-unconditionally-allow-ct-status-dnat.patch

@@ -0,0 +1,22 @@
+--- a/root/usr/share/firewall4/templates/ruleset.uc	2023-07-28 18:55:05.492297782 +0200
++++ b/root/usr/share/firewall4/templates/ruleset.uc	2023-07-28 18:58:52.300598623 +0200
+@@ -218,9 +218,7 @@
+ {%  for (let rule in fw4.rules(`input_${zone.name}`)): %}
+ 		{%+ include("rule.uc", { fw4, rule }) %}
+ {%  endfor %}
+-{%  if (zone.dflags.dnat): %}
+ 		ct status dnat accept comment "!fw4: Accept port redirections"
+-{%  endif %}
+ {%  fw4.includes('chain-append', `input_${zone.name}`) %}
+ 		jump {{ zone.input }}_from_{{ zone.name }}
+ 	}
+@@ -239,9 +237,7 @@
+ {%  for (let rule in fw4.rules(`forward_${zone.name}`)): %}
+ 		{%+ include("rule.uc", { fw4, rule }) %}
+ {%  endfor %}
+-{%  if (zone.dflags.dnat): %}
+ 		ct status dnat accept comment "!fw4: Accept port forwards"
+-{%  endif %}
+ {%  fw4.includes('chain-append', `forward_${zone.name}`) %}
+ 		jump {{ zone.forward }}_to_{{ zone.name }}
+ {%  if (fw4.forward_policy() != "accept" && (zone.log & 1)): %}

6.6/package/network/config/firewall4/patches/999-01-firewall4-add-fullcone-support.patch

@@ -0,0 +1,248 @@
+From d4081c498ddca184578903fe5199d390bbc0707b Mon Sep 17 00:00:00 2001
+From: Syrone Wong <wong.syrone@gmail.com>
+Date: Sat, 9 Apr 2022 13:24:19 +0800
+Subject: [PATCH] firewall4: add fullcone support
+
+fullcone is drop-in replacement of masq for non-udp traffic
+
+add runtime fullcone rule check, disable it globally if fullcone expr is
+invalid
+
+defaults.fullcone is the global switch, while zone.fullcone4 and
+zone.fullcone6 are switches for IPv4 and IPv6 respectively, most
+IPv6 traffic do NOT need this FullCone NAT functionality.
+---
+ root/etc/config/firewall                      |  3 +
+ root/usr/share/firewall4/templates/ruleset.uc | 16 +++-
+ .../firewall4/templates/zone-fullcone.uc      |  4 +
+ root/usr/share/ucode/fw4.uc                   | 76 ++++++++++++++++++-
+ 4 files changed, 96 insertions(+), 3 deletions(-)
+ create mode 100644 root/usr/share/firewall4/templates/zone-fullcone.uc
+
+diff --git a/root/etc/config/firewall b/root/etc/config/firewall
+index b9a4647..7187723 100644
+--- a/root/etc/config/firewall
++++ b/root/etc/config/firewall
+@@ -5,6 +5,7 @@ config defaults
+ 	option forward		REJECT
+ # Uncomment this line to disable ipv6 rules
+ #	option disable_ipv6	1
++	option fullcone '0'
+ 
+ config zone
+ 	option name		lan
+@@ -20,6 +21,8 @@ config zone
+ 	option input		REJECT
+ 	option output		ACCEPT
+ 	option forward		REJECT
++	option fullcone4 '0'
++	option fullcone6 '0'
+ 	option masq		1
+ 	option mtu_fix		1
+ 
+diff --git a/root/usr/share/firewall4/templates/ruleset.uc b/root/usr/share/firewall4/templates/ruleset.uc
+index eaa1f04..e29eae6 100644
+--- a/root/usr/share/firewall4/templates/ruleset.uc
++++ b/root/usr/share/firewall4/templates/ruleset.uc
+@@ -310,6 +310,12 @@ table inet fw4 {
+ {%   for (let redirect in fw4.redirects(`dstnat_${zone.name}`)): %}
+ 		{%+ include("redirect.uc", { fw4, redirect }) %}
+ {%   endfor %}
++{%   if (zone.fullcone4): %}
++		{%+ include("zone-fullcone.uc", { fw4, zone, family: 4, direction: "dstnat" }) %}
++{%   endif %}
++{%   if (zone.fullcone6): %}
++		{%+ include("zone-fullcone.uc", { fw4, zone, family: 6, direction: "dstnat" }) %}
++{%   endif %}
+ {%   fw4.includes('chain-append', `dstnat_${zone.name}`) %}
+ 	}
+ 
+@@ -320,20 +326,26 @@ table inet fw4 {
+ {%   for (let redirect in fw4.redirects(`srcnat_${zone.name}`)): %}
+ 		{%+ include("redirect.uc", { fw4, redirect }) %}
+ {%   endfor %}
+-{%   if (zone.masq): %}
++{%   if (zone.masq && !zone.fullcone4): %}
+ {%    for (let saddrs in zone.masq4_src_subnets): %}
+ {%     for (let daddrs in zone.masq4_dest_subnets): %}
+ 		{%+ include("zone-masq.uc", { fw4, zone, family: 4, saddrs, daddrs }) %}
+ {%     endfor %}
+ {%    endfor %}
+ {%   endif %}
+-{%   if (zone.masq6): %}
++{%   if (zone.masq6 && !zone.fullcone6): %}
+ {%    for (let saddrs in zone.masq6_src_subnets): %}
+ {%     for (let daddrs in zone.masq6_dest_subnets): %}
+ 		{%+ include("zone-masq.uc", { fw4, zone, family: 6, saddrs, daddrs }) %}
+ {%     endfor %}
+ {%    endfor %}
+ {%   endif %}
++{%   if (zone.fullcone4): %}
++		{%+ include("zone-fullcone.uc", { fw4, zone, family: 4, direction: "srcnat" }) %}
++{%   endif %}
++{%   if (zone.fullcone6): %}
++		{%+ include("zone-fullcone.uc", { fw4, zone, family: 6, direction: "srcnat" }) %}
++{%   endif %}
+ {%   fw4.includes('chain-append', `srcnat_${zone.name}`) %}
+ 	}
+ 
+diff --git a/root/usr/share/firewall4/templates/zone-fullcone.uc b/root/usr/share/firewall4/templates/zone-fullcone.uc
+new file mode 100644
+index 0000000..77d9806
+--- /dev/null
++++ b/root/usr/share/firewall4/templates/zone-fullcone.uc
+@@ -0,0 +1,4 @@
++{# /usr/share/firewall4/templates/zone-fullcone.uc #}
++		meta nfproto {{ fw4.nfproto(family) }} fullcone comment "!fw4: Handle {{
++		zone.name
++}} {{ fw4.nfproto(family, true) }} fullcone NAT {{ direction }} traffic"
+diff --git a/root/usr/share/ucode/fw4.uc b/root/usr/share/ucode/fw4.uc
+index 1b4764c..c5716da 100644
+--- a/root/usr/share/ucode/fw4.uc
++++ b/root/usr/share/ucode/fw4.uc
+@@ -1,3 +1,5 @@
++// /usr/share/ucode/fw4.uc
++
+ const fs = require("fs");
+ const uci = require("uci");
+ const ubus = require("ubus");
+@@ -428,6 +430,25 @@ function nft_try_hw_offload(devices) {
+ 	return (rc == 0);
+ }
+ 
++function nft_try_fullcone() {
++	let nft_test =
++		'add table inet fw4-fullcone-test; ' +
++		'add chain inet fw4-fullcone-test dstnat { ' +
++			'type nat hook prerouting priority -100; policy accept; ' +
++			'fullcone; ' +
++		'}; ' +
++		'add chain inet fw4-fullcone-test srcnat { ' +
++			'type nat hook postrouting priority -100; policy accept; ' +
++			'fullcone; ' +
++		'}; ';
++	let cmd = sprintf("/usr/sbin/nft -c '%s' 2>/dev/null", replace(nft_test, "'", "'\\''"));
++	let ok = system(cmd) == 0;
++	//if (!ok) {
++	//	warn("nft_try_fullcone: cmd "+ cmd + "\n");
++	//}
++	return ok;
++}
++
+ 
+ return {
+ 	read_kernel_version: function() {
+@@ -765,6 +786,18 @@ return {
+ 			warn(`[!] ${msg}\n`);
+ 	},
+ 
++	myinfo: function(fmt, ...args) {
++		if (getenv("QUIET"))
++			return;
++
++		let msg = sprintf(fmt, ...args);
++
++		if (getenv("TTY"))
++			warn(`\033[32m${msg}\033[m\n`);
++		else
++			warn(`[I] ${msg}\n`);
++	},
++
+ 	get: function(sid, opt) {
+ 		return this.cursor.get("firewall", sid, opt);
+ 	},
+@@ -946,6 +979,21 @@ return {
+ 		}
+ 	},
+ 
++	myinfo_section: function(s, msg) {
++		if (s[".name"]) {
++			if (s.name)
++				this.myinfo("Section %s (%s) %s", this.section_id(s[".name"]), s.name, msg);
++			else
++				this.myinfo("Section %s %s", this.section_id(s[".name"]), msg);
++		}
++		else {
++			if (s.name)
++				this.myinfo("ubus %s (%s) %s", s.type || "rule", s.name, msg);
++			else
++				this.myinfo("ubus %s %s", s.type || "rule", msg);
++		}
++	},
++
+ 	parse_policy: function(val) {
+ 		return this.parse_enum(val, [
+ 			"accept",
+@@ -1385,6 +1433,7 @@ return {
+ 			"dnat",
+ 			"snat",
+ 			"masquerade",
++			"fullcone",
+ 			"accept",
+ 			"reject",
+ 			"drop"
+@@ -1852,6 +1901,7 @@ return {
+ 		}
+ 
+ 		let defs = this.parse_options(data, {
++			fullcone: [ "bool", "0" ],
+ 			input: [ "policy", "drop" ],
+ 			output: [ "policy", "drop" ],
+ 			forward: [ "policy", "drop" ],
+@@ -1884,6 +1934,11 @@ return {
+ 
+ 		delete defs.syn_flood;
+ 
++		if (!nft_try_fullcone()) {
++			delete defs.fullcone;
++			//warn("nft_try_fullcone failed, disable fullcone globally\n");
++		}
++
+ 		this.state.defaults = defs;
+ 	},
+ 
+@@ -1908,6 +1963,8 @@ return {
+ 			masq_dest: [ "network", null, PARSE_LIST ],
+ 
+ 			masq6: [ "bool" ],
++			fullcone4: [ "bool", "0" ],
++			fullcone6: [ "bool", "0" ],
+ 
+ 			extra: [ "string", null, UNSUPPORTED ],
+ 			extra_src: [ "string", null, UNSUPPORTED ],
+@@ -1940,6 +1997,18 @@ return {
+ 			}
+ 		}
+ 
++		if (this.state.defaults && !this.state.defaults.fullcone) {
++			this.warn_section(data, "fullcone in defaults not enabled, ignore zone fullcone settings");
++			zone.fullcone4 = false;
++			zone.fullcone6 = false;
++		}
++		if (zone.fullcone4) {
++			this.myinfo_section(data, "IPv4 fullcone enabled for zone '" + zone.name + "'");
++		}
++		if (zone.fullcone6) {
++			this.myinfo_section(data, "IPv6 fullcone enabled for zone '" + zone.name + "'");
++		}
++
+ 		if (zone.mtu_fix && this.kernel < 0x040a0000) {
+ 			this.warn_section(data, "option 'mtu_fix' requires kernel 4.10 or later");
+ 			return;
+@@ -2110,10 +2179,15 @@ return {
+ 		zone.related_subnets = related_subnets;
+ 		zone.related_physdevs = related_physdevs;
+ 
++		if (zone.fullcone4 || zone.fullcone6) {
++			zone.dflags.snat = true;
++			zone.dflags.dnat = true;
++		}
++
+ 		if (zone.masq || zone.masq6)
+ 			zone.dflags.snat = true;
+ 
+-		if ((zone.auto_helper && !(zone.masq || zone.masq6)) || length(zone.helper)) {
++		if ((zone.auto_helper && !(zone.masq || zone.masq6 || zone.fullcone4 || zone.fullcone6)) || length(zone.helper)) {
+ 			zone.dflags.helper = true;
+ 
+ 			for (let helper in (length(zone.helper) ? zone.helper : this.state.helpers)) {

6.6/package/network/utils/iwinfo/Makefile

@@ -0,0 +1,119 @@
+#
+# Copyright (C) 2010-2016 Jo-Philipp Wich <jo@mein.io>
+#
+# This is free software, licensed under the GPL 2 license.
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=libiwinfo
+PKG_RELEASE:=1
+
+PKG_SOURCE_PROTO:=git
+PKG_SOURCE_URL=$(PROJECT_GIT)/project/iwinfo.git
+PKG_SOURCE_DATE:=2023-02-06
+PKG_SOURCE_VERSION:=c7eb8ebe33de2ff2d08064258edb047e5ac09f29
+PKG_MIRROR_HASH:=f1124cf305710b0f04e2ea6dd42ba96ba4a3367da4d4afb4c19d5af9905b1cc2
+PKG_MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
+PKG_LICENSE:=GPL-2.0
+
+IWINFO_ABI_VERSION:=20230121
+
+include $(INCLUDE_DIR)/package.mk
+
+
+define Package/libiwinfo
+  SECTION:=libs
+  CATEGORY:=Libraries
+  TITLE:=Generalized Wireless Information Library (iwinfo)
+  DEPENDS:=+libnl-tiny +libuci +libubus +libiwinfo-data
+  ABI_VERSION:=$(IWINFO_ABI_VERSION)
+endef
+
+define Package/libiwinfo/description
+  Wireless information library with simplified API for nl80211
+  and wext driver interfaces.
+endef
+
+
+define Package/libiwinfo-lua
+  SUBMENU:=Lua
+  SECTION:=lang
+  CATEGORY:=Languages
+  TITLE:=libiwinfo Lua binding
+  DEPENDS:=+libiwinfo +liblua
+endef
+
+define Package/libiwinfo-lua/description
+  This is the Lua binding for the iwinfo library. It provides access to all enabled
+  backends.
+endef
+
+
+define Package/libiwinfo-data
+  TITLE:=libiwinfo Lua binding
+  HIDDEN:=1
+endef
+
+
+define Package/iwinfo
+  SECTION:=utils
+  CATEGORY:=Utilities
+  TITLE:=Generalized Wireless Information utility
+  DEPENDS:=+libiwinfo
+endef
+
+define Package/iwinfo/description
+  Command line frontend for the wireless information library.
+endef
+
+
+define Build/Configure
+endef
+
+TARGET_CFLAGS += \
+	-I$(STAGING_DIR)/usr/include/libnl-tiny \
+	-I$(STAGING_DIR)/usr/include \
+	-D_GNU_SOURCE
+
+MAKE_FLAGS += \
+	FPIC="$(FPIC)" \
+	CFLAGS="$(TARGET_CFLAGS)" \
+	LDFLAGS="$(TARGET_LDFLAGS)" \
+	BACKENDS="nl80211" \
+	SOVERSION="$(IWINFO_ABI_VERSION)"
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/include/iwinfo
+	$(CP) $(PKG_BUILD_DIR)/include/iwinfo.h $(1)/usr/include/
+	$(CP) $(PKG_BUILD_DIR)/include/iwinfo/* $(1)/usr/include/iwinfo/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_BUILD_DIR)/libiwinfo.so* $(1)/usr/lib/
+	$(INSTALL_DIR) $(1)/usr/lib/lua
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo.so $(1)/usr/lib/lua/iwinfo.so
+endef
+
+define Package/libiwinfo/install
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/libiwinfo.so.$(IWINFO_ABI_VERSION) $(1)/usr/lib/libiwinfo.so.$(IWINFO_ABI_VERSION)
+endef
+
+define Package/libiwinfo-lua/install
+	$(INSTALL_DIR) $(1)/usr/lib/lua
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo.so $(1)/usr/lib/lua/iwinfo.so
+endef
+
+define Package/libiwinfo-data/install
+	$(INSTALL_DIR) $(1)/usr/share/libiwinfo
+	$(INSTALL_DATA) $(PKG_BUILD_DIR)/devices.txt $(1)/usr/share/libiwinfo/devices.txt
+endef
+
+define Package/iwinfo/install
+	$(INSTALL_DIR) $(1)/usr/bin
+	$(INSTALL_BIN) $(PKG_BUILD_DIR)/iwinfo $(1)/usr/bin/iwinfo
+endef
+
+$(eval $(call BuildPackage,libiwinfo))
+$(eval $(call BuildPackage,libiwinfo-lua))
+$(eval $(call BuildPackage,libiwinfo-data))
+$(eval $(call BuildPackage,iwinfo))

6.6/package/network/utils/nftables/Makefile

@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Copyright (C) 2015 OpenWrt.org
+#
+
+include $(TOPDIR)/rules.mk
+
+PKG_NAME:=nftables
+PKG_VERSION:=1.0.7
+PKG_RELEASE:=1
+
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
+PKG_SOURCE_URL:=https://netfilter.org/projects/$(PKG_NAME)/files
+PKG_HASH:=c12ac941fff9adaedf17367d5ce213789b98a0d314277bc22b3d71e10891f412
+
+PKG_MAINTAINER:=
+PKG_LICENSE:=GPL-2.0
+PKG_LICENSE_FILES:=COPYING
+
+PKG_FIXUP:=autoreconf
+PKG_INSTALL:=1
+
+PKG_BUILD_FLAGS:=lto
+
+include $(INCLUDE_DIR)/package.mk
+
+DISABLE_NLS:=
+
+CONFIGURE_ARGS += \
+        --disable-debug \
+        --disable-man-doc \
+        --with-mini-gmp \
+        --without-cli \
+        --disable-python
+
+define Package/nftables/Default
+  SECTION:=net
+  CATEGORY:=Network
+  SUBMENU:=Firewall
+  TITLE:=nftables userspace utility
+  DEPENDS:=+kmod-nft-core +libnftnl
+  URL:=http://netfilter.org/projects/nftables/
+  PROVIDES:=nftables
+endef
+
+define Package/nftables-nojson
+  $(Package/nftables/Default)
+  TITLE+= no JSON support
+  VARIANT:=nojson
+  DEFAULT_VARIANT:=1
+  CONFLICTS:=nftables-json
+endef
+
+define Package/nftables-json
+  $(Package/nftables/Default)
+  TITLE+= with JSON support
+  VARIANT:=json
+  DEPENDS+=+jansson
+endef
+
+ifeq ($(BUILD_VARIANT),json)
+  CONFIGURE_ARGS += --with-json
+endif
+
+define Build/InstallDev
+	$(INSTALL_DIR) $(1)/usr/lib $(1)/usr/include
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.so* $(1)/usr/lib/
+	$(CP) $(PKG_INSTALL_DIR)/usr/include/nftables $(1)/usr/include/
+	$(INSTALL_DIR) $(1)/usr/lib/pkgconfig
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/pkgconfig/libnftables.pc \
+		$(1)/usr/lib/pkgconfig/
+endef
+
+define Package/nftables/install/Default
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_INSTALL_DIR)/usr/sbin/nft $(1)/usr/sbin/
+	$(INSTALL_DIR) $(1)/usr/lib
+	$(CP) $(PKG_INSTALL_DIR)/usr/lib/*.so* $(1)/usr/lib/
+endef
+
+Package/nftables-nojson/install = $(Package/nftables/install/Default)
+Package/nftables-json/install = $(Package/nftables/install/Default)
+
+$(eval $(call BuildPackage,nftables-nojson))
+$(eval $(call BuildPackage,nftables-json))

6.6/package/network/utils/nftables/patches/002-nftables-add-fullcone-expression-support.patch

@@ -0,0 +1,223 @@
+From 58c89e8768711a959fdc6e953df3ea2254ff93c1 Mon Sep 17 00:00:00 2001
+From: Syrone Wong <wong.syrone@gmail.com>
+Date: Sat, 9 Apr 2022 00:38:51 +0800
+Subject: [PATCH] nftables: add fullcone expression support
+
+Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
+---
+ include/linux/netfilter/nf_tables.h | 16 ++++++++++
+ include/statement.h                 |  1 +
+ src/netlink_delinearize.c           | 48 +++++++++++++++++++++++++++++
+ src/netlink_linearize.c             |  7 +++++
+ src/parser_bison.y                  | 28 +++++++++++++++--
+ src/scanner.l                       |  1 +
+ src/statement.c                     |  1 +
+ 7 files changed, 100 insertions(+), 2 deletions(-)
+
+diff --git a/include/linux/netfilter/nf_tables.h b/include/linux/netfilter/nf_tables.h
+index 75df968..beab9d8 100644
+--- a/include/linux/netfilter/nf_tables.h
++++ b/include/linux/netfilter/nf_tables.h
+@@ -1409,6 +1409,22 @@ enum nft_masq_attributes {
+ };
+ #define NFTA_MASQ_MAX		(__NFTA_MASQ_MAX - 1)
+ 
++/**
++ * enum nft_fullcone_attributes - nf_tables fullcone expression attributes
++ *
++ * @NFTA_FULLCONE_FLAGS: NAT flags (see NF_NAT_RANGE_* in linux/netfilter/nf_nat.h) (NLA_U32)
++ * @NFTA_FULLCONE_REG_PROTO_MIN: source register of proto range start (NLA_U32: nft_registers)
++ * @NFTA_FULLCONE_REG_PROTO_MAX: source register of proto range end (NLA_U32: nft_registers)
++ */
++enum nft_fullcone_attributes {
++	NFTA_FULLCONE_UNSPEC,
++	NFTA_FULLCONE_FLAGS,
++	NFTA_FULLCONE_REG_PROTO_MIN,
++	NFTA_FULLCONE_REG_PROTO_MAX,
++	__NFTA_FULLCONE_MAX
++};
++#define NFTA_FULLCONE_MAX		(__NFTA_FULLCONE_MAX - 1)
++
+ /**
+  * enum nft_redir_attributes - nf_tables redirect expression netlink attributes
+  *
+diff --git a/include/statement.h b/include/statement.h
+index 2a2d300..cbd48dd 100644
+--- a/include/statement.h
++++ b/include/statement.h
+@@ -122,6 +122,7 @@ enum nft_nat_etypes {
+ 	__NFT_NAT_SNAT = NFT_NAT_SNAT,
+ 	__NFT_NAT_DNAT = NFT_NAT_DNAT,
+ 	NFT_NAT_MASQ,
++	NFT_NAT_FULLCONE,
+ 	NFT_NAT_REDIR,
+ };
+ 
+diff --git a/src/netlink_delinearize.c b/src/netlink_delinearize.c
+index 068c3bb..8513113 100644
+--- a/src/netlink_delinearize.c
++++ b/src/netlink_delinearize.c
+@@ -1369,6 +1369,53 @@ static void netlink_parse_masq(struct netlink_parse_ctx *ctx,
+ 	stmt_free(stmt);
+ }
+ 
++static void netlink_parse_fullcone(struct netlink_parse_ctx *ctx,
++			       const struct location *loc,
++			       const struct nftnl_expr *nle)
++{
++	enum nft_registers reg1, reg2;
++	struct expr *proto;
++	struct stmt *stmt;
++	uint32_t flags = 0;
++
++	if (nftnl_expr_is_set(nle, NFTNL_EXPR_FULLCONE_FLAGS))
++		flags = nftnl_expr_get_u32(nle, NFTNL_EXPR_FULLCONE_FLAGS);
++
++	stmt = nat_stmt_alloc(loc, NFT_NAT_FULLCONE);
++	stmt->nat.flags = flags;
++
++	reg1 = netlink_parse_register(nle, NFTNL_EXPR_FULLCONE_REG_PROTO_MIN);
++	if (reg1) {
++		proto = netlink_get_register(ctx, loc, reg1);
++		if (proto == NULL) {
++			netlink_error(ctx, loc,
++				      "fullcone statement has no proto expression");
++			goto out_err;
++		}
++		expr_set_type(proto, &inet_service_type, BYTEORDER_BIG_ENDIAN);
++		stmt->nat.proto = proto;
++	}
++
++	reg2 = netlink_parse_register(nle, NFTNL_EXPR_FULLCONE_REG_PROTO_MAX);
++	if (reg2 && reg2 != reg1) {
++		proto = netlink_get_register(ctx, loc, reg2);
++		if (proto == NULL) {
++			netlink_error(ctx, loc,
++				      "fullcone statement has no proto expression");
++			goto out_err;
++		}
++		expr_set_type(proto, &inet_service_type, BYTEORDER_BIG_ENDIAN);
++		if (stmt->nat.proto != NULL)
++			proto = range_expr_alloc(loc, stmt->nat.proto, proto);
++		stmt->nat.proto = proto;
++	}
++
++	ctx->stmt = stmt;
++	return;
++out_err:
++	stmt_free(stmt);
++}
++
+ static void netlink_parse_redir(struct netlink_parse_ctx *ctx,
+ 				const struct location *loc,
+ 				const struct nftnl_expr *nle)
+@@ -1787,6 +1834,7 @@ static const struct expr_handler netlink_parsers[] = {
+ 	{ .name = "tproxy",	.parse = netlink_parse_tproxy },
+ 	{ .name = "notrack",	.parse = netlink_parse_notrack },
+ 	{ .name = "masq",	.parse = netlink_parse_masq },
++	{ .name = "fullcone",	.parse = netlink_parse_fullcone },
+ 	{ .name = "redir",	.parse = netlink_parse_redir },
+ 	{ .name = "dup",	.parse = netlink_parse_dup },
+ 	{ .name = "queue",	.parse = netlink_parse_queue },
+diff --git a/src/netlink_linearize.c b/src/netlink_linearize.c
+index c8bbcb7..505eafa 100644
+--- a/src/netlink_linearize.c
++++ b/src/netlink_linearize.c
+@@ -1140,6 +1140,13 @@ static void netlink_gen_nat_stmt(struct netlink_linearize_ctx *ctx,
+ 		nftnl_reg_pmin = NFTNL_EXPR_MASQ_REG_PROTO_MIN;
+ 		nftnl_reg_pmax = NFTNL_EXPR_MASQ_REG_PROTO_MAX;
+ 		break;
++	case NFT_NAT_FULLCONE:
++		nle = alloc_nft_expr("fullcone");
++
++		nftnl_flag_attr = NFTNL_EXPR_FULLCONE_FLAGS;
++		nftnl_reg_pmin = NFTNL_EXPR_FULLCONE_REG_PROTO_MIN;
++		nftnl_reg_pmax = NFTNL_EXPR_FULLCONE_REG_PROTO_MAX;
++		break;
+ 	case NFT_NAT_REDIR:
+ 		nle = alloc_nft_expr("redir");
+ 
+diff --git a/src/parser_bison.y b/src/parser_bison.y
+index ca5c488..ec9fc9b 100644
+--- a/src/parser_bison.y
++++ b/src/parser_bison.y
+@@ -571,6 +571,7 @@ int nft_lex(void *, void *, void *);
+ %token SNAT			"snat"
+ %token DNAT			"dnat"
+ %token MASQUERADE		"masquerade"
++%token FULLCONE		"fullcone"
+ %token REDIRECT			"redirect"
+ %token RANDOM			"random"
+ %token FULLY_RANDOM		"fully-random"
+@@ -703,8 +704,8 @@ int nft_lex(void *, void *, void *);
+ %type <val>			limit_burst_pkts limit_burst_bytes limit_mode limit_bytes time_unit quota_mode
+ %type <stmt>			reject_stmt reject_stmt_alloc
+ %destructor { stmt_free($$); }	reject_stmt reject_stmt_alloc
+-%type <stmt>			nat_stmt nat_stmt_alloc masq_stmt masq_stmt_alloc redir_stmt redir_stmt_alloc
+-%destructor { stmt_free($$); }	nat_stmt nat_stmt_alloc masq_stmt masq_stmt_alloc redir_stmt redir_stmt_alloc
++%type <stmt>			nat_stmt nat_stmt_alloc masq_stmt masq_stmt_alloc fullcone_stmt fullcone_stmt_alloc redir_stmt redir_stmt_alloc
++%destructor { stmt_free($$); }	nat_stmt nat_stmt_alloc masq_stmt masq_stmt_alloc fullcone_stmt fullcone_stmt_alloc redir_stmt redir_stmt_alloc
+ %type <val>			nf_nat_flags nf_nat_flag offset_opt
+ %type <stmt>			tproxy_stmt
+ %destructor { stmt_free($$); }	tproxy_stmt
+@@ -2853,6 +2854,7 @@ stmt			:	verdict_stmt
+ 			|	queue_stmt
+ 			|	ct_stmt
+ 			|	masq_stmt	close_scope_nat
++			|	fullcone_stmt	close_scope_nat
+ 			|	redir_stmt	close_scope_nat
+ 			|	dup_stmt	close_scope_dup
+ 			|	fwd_stmt	close_scope_fwd
+@@ -3753,6 +3755,28 @@ masq_stmt_args		:	TO 	COLON	stmt_expr
+ 			}
+ 			;
+ 
++fullcone_stmt		:	fullcone_stmt_alloc		fullcone_stmt_args
++			|	fullcone_stmt_alloc
++			;
++
++fullcone_stmt_alloc		:	FULLCONE	{ $$ = nat_stmt_alloc(&@$, NFT_NAT_FULLCONE); }
++			;
++
++fullcone_stmt_args		:	TO 	COLON	stmt_expr
++			{
++				$<stmt>0->nat.proto = $3;
++			}
++			|	TO 	COLON	stmt_expr	nf_nat_flags
++			{
++				$<stmt>0->nat.proto = $3;
++				$<stmt>0->nat.flags = $4;
++			}
++			|	nf_nat_flags
++			{
++				$<stmt>0->nat.flags = $1;
++			}
++			;
++
+ redir_stmt		:	redir_stmt_alloc	redir_stmt_arg
+ 			|	redir_stmt_alloc
+ 			;
+diff --git a/src/scanner.l b/src/scanner.l
+index 2154281..c389860 100644
+--- a/src/scanner.l
++++ b/src/scanner.l
+@@ -453,6 +453,7 @@ addrstring	({macaddr}|{ip4addr}|{ip6addr})
+ "snat"			{ scanner_push_start_cond(yyscanner, SCANSTATE_STMT_NAT); return SNAT; }
+ "dnat"			{ scanner_push_start_cond(yyscanner, SCANSTATE_STMT_NAT); return DNAT; }
+ "masquerade"		{ scanner_push_start_cond(yyscanner, SCANSTATE_STMT_NAT); return MASQUERADE; }
++"fullcone"		{ scanner_push_start_cond(yyscanner, SCANSTATE_STMT_NAT); return FULLCONE; }
+ "redirect"		{ scanner_push_start_cond(yyscanner, SCANSTATE_STMT_NAT); return REDIRECT; }
+ "random"		{ return RANDOM; }
+ <SCANSTATE_STMT_NAT>{
+diff --git a/src/statement.c b/src/statement.c
+index 30caf9c..f4866c2 100644
+--- a/src/statement.c
++++ b/src/statement.c
+@@ -650,6 +650,7 @@ const char *nat_etype2str(enum nft_nat_etypes type)
+ 		[NFT_NAT_SNAT]	= "snat",
+ 		[NFT_NAT_DNAT]	= "dnat",
+ 		[NFT_NAT_MASQ]	= "masquerade",
++		[NFT_NAT_FULLCONE] = "fullcone",
+ 		[NFT_NAT_REDIR]	= "redirect",
+ 	};
+ 

6.6/target/linux/generic/files/drivers/net/phy/swconfig_leds.c

@@ -0,0 +1,571 @@
+/*
+ * swconfig_led.c: LED trigger support for the switch configuration API
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ */
+
+#ifdef CONFIG_SWCONFIG_LEDS
+
+#include <linux/leds.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/workqueue.h>
+
+#define SWCONFIG_LED_TIMER_INTERVAL	(HZ / 10)
+#define SWCONFIG_LED_NUM_PORTS		32
+
+#define SWCONFIG_LED_PORT_SPEED_NA	0x01	/* unknown speed */
+#define SWCONFIG_LED_PORT_SPEED_10	0x02	/* 10 Mbps */
+#define SWCONFIG_LED_PORT_SPEED_100	0x04	/* 100 Mbps */
+#define SWCONFIG_LED_PORT_SPEED_1000	0x08	/* 1000 Mbps */
+#define SWCONFIG_LED_PORT_SPEED_ALL	(SWCONFIG_LED_PORT_SPEED_NA | \
+					 SWCONFIG_LED_PORT_SPEED_10 | \
+					 SWCONFIG_LED_PORT_SPEED_100 | \
+					 SWCONFIG_LED_PORT_SPEED_1000)
+
+#define SWCONFIG_LED_MODE_LINK		0x01
+#define SWCONFIG_LED_MODE_TX		0x02
+#define SWCONFIG_LED_MODE_RX		0x04
+#define SWCONFIG_LED_MODE_TXRX		(SWCONFIG_LED_MODE_TX   | \
+					 SWCONFIG_LED_MODE_RX)
+#define SWCONFIG_LED_MODE_ALL		(SWCONFIG_LED_MODE_LINK | \
+					 SWCONFIG_LED_MODE_TX   | \
+					 SWCONFIG_LED_MODE_RX)
+
+struct switch_led_trigger {
+	struct led_trigger trig;
+	struct switch_dev *swdev;
+
+	struct delayed_work sw_led_work;
+	u32 port_mask;
+	u32 port_link;
+	unsigned long long port_tx_traffic[SWCONFIG_LED_NUM_PORTS];
+	unsigned long long port_rx_traffic[SWCONFIG_LED_NUM_PORTS];
+	u8 link_speed[SWCONFIG_LED_NUM_PORTS];
+};
+
+struct swconfig_trig_data {
+	struct led_classdev *led_cdev;
+	struct switch_dev *swdev;
+
+	rwlock_t lock;
+	u32 port_mask;
+
+	bool prev_link;
+	unsigned long prev_traffic;
+	enum led_brightness prev_brightness;
+	u8 mode;
+	u8 speed_mask;
+};
+
+static void
+swconfig_trig_set_brightness(struct swconfig_trig_data *trig_data,
+			     enum led_brightness brightness)
+{
+	led_set_brightness(trig_data->led_cdev, brightness);
+	trig_data->prev_brightness = brightness;
+}
+
+static void
+swconfig_trig_update_port_mask(struct led_trigger *trigger)
+{
+	struct list_head *entry;
+	struct switch_led_trigger *sw_trig;
+	u32 port_mask;
+
+	if (!trigger)
+		return;
+
+	sw_trig = (void *) trigger;
+
+	port_mask = 0;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,16,0)
+	spin_lock(&trigger->leddev_list_lock);
+#else
+	read_lock(&trigger->leddev_list_lock);
+#endif
+	list_for_each(entry, &trigger->led_cdevs) {
+		struct led_classdev *led_cdev;
+		struct swconfig_trig_data *trig_data;
+
+		led_cdev = list_entry(entry, struct led_classdev, trig_list);
+		trig_data = led_cdev->trigger_data;
+		if (trig_data) {
+			read_lock(&trig_data->lock);
+			port_mask |= trig_data->port_mask;
+			read_unlock(&trig_data->lock);
+		}
+	}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,16,0)
+	spin_unlock(&trigger->leddev_list_lock);
+#else
+	read_unlock(&trigger->leddev_list_lock);
+#endif
+
+	sw_trig->port_mask = port_mask;
+
+	if (port_mask)
+		schedule_delayed_work(&sw_trig->sw_led_work,
+				      SWCONFIG_LED_TIMER_INTERVAL);
+	else
+		cancel_delayed_work_sync(&sw_trig->sw_led_work);
+}
+
+static ssize_t
+swconfig_trig_port_mask_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	unsigned long port_mask;
+	int ret;
+	bool changed;
+
+	ret = kstrtoul(buf, 0, &port_mask);
+	if (ret)
+		return ret;
+
+	write_lock(&trig_data->lock);
+	changed = (trig_data->port_mask != port_mask);
+	trig_data->port_mask = port_mask;
+	write_unlock(&trig_data->lock);
+
+	if (changed) {
+		if (port_mask == 0)
+			swconfig_trig_set_brightness(trig_data, LED_OFF);
+
+		swconfig_trig_update_port_mask(led_cdev->trigger);
+	}
+
+	return size;
+}
+
+static ssize_t
+swconfig_trig_port_mask_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	u32 port_mask;
+
+	read_lock(&trig_data->lock);
+	port_mask = trig_data->port_mask;
+	read_unlock(&trig_data->lock);
+
+	sprintf(buf, "%#x\n", port_mask);
+
+	return strlen(buf) + 1;
+}
+
+static DEVICE_ATTR(port_mask, 0644, swconfig_trig_port_mask_show,
+		   swconfig_trig_port_mask_store);
+
+/* speed_mask file handler - display value */
+static ssize_t swconfig_trig_speed_mask_show(struct device *dev,
+					     struct device_attribute *attr,
+					     char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	u8 speed_mask;
+
+	read_lock(&trig_data->lock);
+	speed_mask = trig_data->speed_mask;
+	read_unlock(&trig_data->lock);
+
+	sprintf(buf, "%#x\n", speed_mask);
+
+	return strlen(buf) + 1;
+}
+
+/* speed_mask file handler - store value */
+static ssize_t swconfig_trig_speed_mask_store(struct device *dev,
+					      struct device_attribute *attr,
+					      const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	u8 speed_mask;
+	int ret;
+
+	ret = kstrtou8(buf, 0, &speed_mask);
+	if (ret)
+		return ret;
+
+	write_lock(&trig_data->lock);
+	trig_data->speed_mask = speed_mask & SWCONFIG_LED_PORT_SPEED_ALL;
+	write_unlock(&trig_data->lock);
+
+	return size;
+}
+
+/* speed_mask special file */
+static DEVICE_ATTR(speed_mask, 0644, swconfig_trig_speed_mask_show,
+		   swconfig_trig_speed_mask_store);
+
+static ssize_t swconfig_trig_mode_show(struct device *dev,
+		struct device_attribute *attr, char *buf)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	u8 mode;
+
+	read_lock(&trig_data->lock);
+	mode = trig_data->mode;
+	read_unlock(&trig_data->lock);
+
+	if (mode == 0) {
+		strcpy(buf, "none\n");
+	} else {
+		if (mode & SWCONFIG_LED_MODE_LINK)
+			strcat(buf, "link ");
+		if (mode & SWCONFIG_LED_MODE_TX)
+			strcat(buf, "tx ");
+		if (mode & SWCONFIG_LED_MODE_RX)
+			strcat(buf, "rx ");
+		strcat(buf, "\n");
+	}
+
+	return strlen(buf)+1;
+}
+
+static ssize_t swconfig_trig_mode_store(struct device *dev,
+		struct device_attribute *attr, const char *buf, size_t size)
+{
+	struct led_classdev *led_cdev = dev_get_drvdata(dev);
+	struct swconfig_trig_data *trig_data = led_cdev->trigger_data;
+	char copybuf[128];
+	int new_mode = -1;
+	char *p, *token;
+
+	/* take a copy since we don't want to trash the inbound buffer when using strsep */
+	strncpy(copybuf, buf, sizeof(copybuf));
+	copybuf[sizeof(copybuf) - 1] = 0;
+	p = copybuf;
+
+	while ((token = strsep(&p, " \t\n")) != NULL) {
+		if (!*token)
+			continue;
+
+		if (new_mode < 0)
+			new_mode = 0;
+
+		if (!strcmp(token, "none"))
+			new_mode = 0;
+		else if (!strcmp(token, "tx"))
+			new_mode |= SWCONFIG_LED_MODE_TX;
+		else if (!strcmp(token, "rx"))
+			new_mode |= SWCONFIG_LED_MODE_RX;
+		else if (!strcmp(token, "link"))
+			new_mode |= SWCONFIG_LED_MODE_LINK;
+		else
+			return -EINVAL;
+	}
+
+	if (new_mode < 0)
+		return -EINVAL;
+
+	write_lock(&trig_data->lock);
+	trig_data->mode = (u8)new_mode;
+	write_unlock(&trig_data->lock);
+
+	return size;
+}
+
+/* mode special file */
+static DEVICE_ATTR(mode, 0644, swconfig_trig_mode_show,
+		   swconfig_trig_mode_store);
+
+static int
+swconfig_trig_activate(struct led_classdev *led_cdev)
+{
+	struct switch_led_trigger *sw_trig;
+	struct swconfig_trig_data *trig_data;
+	int err;
+
+	trig_data = kzalloc(sizeof(struct swconfig_trig_data), GFP_KERNEL);
+	if (!trig_data)
+		return -ENOMEM;
+
+	sw_trig = (void *) led_cdev->trigger;
+
+	rwlock_init(&trig_data->lock);
+	trig_data->led_cdev = led_cdev;
+	trig_data->swdev = sw_trig->swdev;
+	trig_data->speed_mask = SWCONFIG_LED_PORT_SPEED_ALL;
+	trig_data->mode = SWCONFIG_LED_MODE_ALL;
+	led_cdev->trigger_data = trig_data;
+
+	err = device_create_file(led_cdev->dev, &dev_attr_port_mask);
+	if (err)
+		goto err_free;
+
+	err = device_create_file(led_cdev->dev, &dev_attr_speed_mask);
+	if (err)
+		goto err_dev_free;
+
+	err = device_create_file(led_cdev->dev, &dev_attr_mode);
+	if (err)
+		goto err_mode_free;
+
+	return 0;
+
+err_mode_free:
+	device_remove_file(led_cdev->dev, &dev_attr_speed_mask);
+
+err_dev_free:
+	device_remove_file(led_cdev->dev, &dev_attr_port_mask);
+
+err_free:
+	led_cdev->trigger_data = NULL;
+	kfree(trig_data);
+
+	return err;
+}
+
+static void
+swconfig_trig_deactivate(struct led_classdev *led_cdev)
+{
+	struct swconfig_trig_data *trig_data;
+
+	swconfig_trig_update_port_mask(led_cdev->trigger);
+
+	trig_data = (void *) led_cdev->trigger_data;
+	if (trig_data) {
+		device_remove_file(led_cdev->dev, &dev_attr_port_mask);
+		device_remove_file(led_cdev->dev, &dev_attr_speed_mask);
+		device_remove_file(led_cdev->dev, &dev_attr_mode);
+		kfree(trig_data);
+	}
+}
+
+/*
+ * link off -> led off (can't be any other reason to turn it on)
+ * link on:
+ *	mode link: led on by default only if speed matches, else off
+ *	mode txrx: blink only if speed matches, else off
+ */
+static void
+swconfig_trig_led_event(struct switch_led_trigger *sw_trig,
+			struct led_classdev *led_cdev)
+{
+	struct swconfig_trig_data *trig_data;
+	u32 port_mask;
+	bool link;
+	u8 speed_mask, mode;
+	enum led_brightness led_base, led_blink;
+
+	trig_data = led_cdev->trigger_data;
+	if (!trig_data)
+		return;
+
+	read_lock(&trig_data->lock);
+	port_mask = trig_data->port_mask;
+	speed_mask = trig_data->speed_mask;
+	mode = trig_data->mode;
+	read_unlock(&trig_data->lock);
+
+	link = !!(sw_trig->port_link & port_mask);
+	if (!link) {
+		if (trig_data->prev_brightness != LED_OFF)
+			swconfig_trig_set_brightness(trig_data, LED_OFF); /* and stop */
+	}
+	else {
+		unsigned long traffic;
+		int speedok;	/* link speed flag */
+		int i;
+
+		led_base = LED_FULL;
+		led_blink = LED_OFF;
+		traffic = 0;
+		speedok = 0;
+		for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
+			if (port_mask & (1 << i)) {
+				if (sw_trig->link_speed[i] & speed_mask) {
+					traffic += ((mode & SWCONFIG_LED_MODE_TX) ?
+						    sw_trig->port_tx_traffic[i] : 0) +
+						((mode & SWCONFIG_LED_MODE_RX) ?
+						 sw_trig->port_rx_traffic[i] : 0);
+					speedok = 1;
+				}
+			}
+		}
+
+		if (speedok) {
+			/* At least one port speed matches speed_mask */
+			if (!(mode & SWCONFIG_LED_MODE_LINK)) {
+				led_base = LED_OFF;
+				led_blink = LED_FULL;
+			}
+
+			if (trig_data->prev_brightness != led_base)
+				swconfig_trig_set_brightness(trig_data,
+							     led_base);
+			else if (traffic != trig_data->prev_traffic)
+				swconfig_trig_set_brightness(trig_data,
+							     led_blink);
+		} else if (trig_data->prev_brightness != LED_OFF)
+			swconfig_trig_set_brightness(trig_data, LED_OFF);
+
+		trig_data->prev_traffic = traffic;
+	}
+
+	trig_data->prev_link = link;
+}
+
+static void
+swconfig_trig_update_leds(struct switch_led_trigger *sw_trig)
+{
+	struct list_head *entry;
+	struct led_trigger *trigger;
+
+	trigger = &sw_trig->trig;
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,16,0)
+	spin_lock(&trigger->leddev_list_lock);
+#else
+	read_lock(&trigger->leddev_list_lock);
+#endif
+	list_for_each(entry, &trigger->led_cdevs) {
+		struct led_classdev *led_cdev;
+
+		led_cdev = list_entry(entry, struct led_classdev, trig_list);
+		swconfig_trig_led_event(sw_trig, led_cdev);
+	}
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(5,16,0)
+	spin_unlock(&trigger->leddev_list_lock);
+#else
+	read_unlock(&trigger->leddev_list_lock);
+#endif
+}
+
+static void
+swconfig_led_work_func(struct work_struct *work)
+{
+	struct switch_led_trigger *sw_trig;
+	struct switch_dev *swdev;
+	u32 port_mask;
+	u32 link;
+	int i;
+
+	sw_trig = container_of(work, struct switch_led_trigger,
+			       sw_led_work.work);
+
+	port_mask = sw_trig->port_mask;
+	swdev = sw_trig->swdev;
+
+	link = 0;
+	for (i = 0; i < SWCONFIG_LED_NUM_PORTS; i++) {
+		u32 port_bit;
+
+		sw_trig->link_speed[i] = 0;
+
+		port_bit = BIT(i);
+		if ((port_mask & port_bit) == 0)
+			continue;
+
+		if (swdev->ops->get_port_link) {
+			struct switch_port_link port_link;
+
+			memset(&port_link, '\0', sizeof(port_link));
+			swdev->ops->get_port_link(swdev, i, &port_link);
+
+			if (port_link.link) {
+				link |= port_bit;
+				switch (port_link.speed) {
+				case SWITCH_PORT_SPEED_UNKNOWN:
+					sw_trig->link_speed[i] =
+						SWCONFIG_LED_PORT_SPEED_NA;
+					break;
+				case SWITCH_PORT_SPEED_10:
+					sw_trig->link_speed[i] =
+						SWCONFIG_LED_PORT_SPEED_10;
+					break;
+				case SWITCH_PORT_SPEED_100:
+					sw_trig->link_speed[i] =
+						SWCONFIG_LED_PORT_SPEED_100;
+					break;
+				case SWITCH_PORT_SPEED_1000:
+					sw_trig->link_speed[i] =
+						SWCONFIG_LED_PORT_SPEED_1000;
+					break;
+				}
+			}
+		}
+
+		if (swdev->ops->get_port_stats) {
+			struct switch_port_stats port_stats;
+
+			memset(&port_stats, '\0', sizeof(port_stats));
+			swdev->ops->get_port_stats(swdev, i, &port_stats);
+			sw_trig->port_tx_traffic[i] = port_stats.tx_bytes;
+			sw_trig->port_rx_traffic[i] = port_stats.rx_bytes;
+		}
+	}
+
+	sw_trig->port_link = link;
+
+	swconfig_trig_update_leds(sw_trig);
+
+	schedule_delayed_work(&sw_trig->sw_led_work,
+			      SWCONFIG_LED_TIMER_INTERVAL);
+}
+
+static int
+swconfig_create_led_trigger(struct switch_dev *swdev)
+{
+	struct switch_led_trigger *sw_trig;
+	int err;
+
+	if (!swdev->ops->get_port_link)
+		return 0;
+
+	sw_trig = kzalloc(sizeof(struct switch_led_trigger), GFP_KERNEL);
+	if (!sw_trig)
+		return -ENOMEM;
+
+	sw_trig->swdev = swdev;
+	sw_trig->trig.name = swdev->devname;
+	sw_trig->trig.activate = swconfig_trig_activate;
+	sw_trig->trig.deactivate = swconfig_trig_deactivate;
+
+	INIT_DELAYED_WORK(&sw_trig->sw_led_work, swconfig_led_work_func);
+
+	err = led_trigger_register(&sw_trig->trig);
+	if (err)
+		goto err_free;
+
+	swdev->led_trigger = sw_trig;
+
+	return 0;
+
+err_free:
+	kfree(sw_trig);
+	return err;
+}
+
+static void
+swconfig_destroy_led_trigger(struct switch_dev *swdev)
+{
+	struct switch_led_trigger *sw_trig;
+
+	sw_trig = swdev->led_trigger;
+	if (sw_trig) {
+		cancel_delayed_work_sync(&sw_trig->sw_led_work);
+		led_trigger_unregister(&sw_trig->trig);
+		kfree(sw_trig);
+	}
+}
+
+#else /* SWCONFIG_LEDS */
+static inline int
+swconfig_create_led_trigger(struct switch_dev *swdev) { return 0; }
+
+static inline void
+swconfig_destroy_led_trigger(struct switch_dev *swdev) { }
+#endif /* CONFIG_SWCONFIG_LEDS */

6.6/target/linux/generic/hack-6.6/998-ndpi-hook.patch

@@ -0,0 +1,81 @@
+diff -urpN linux-6.1.38.old/include/net/netfilter/nf_conntrack.h linux-6.1.38/include/net/netfilter/nf_conntrack.h
+--- linux-6.1.38.old/include/net/netfilter/nf_conntrack.h	2023-07-05 23:27:38.000000000 +0600
++++ linux-6.1.38/include/net/netfilter/nf_conntrack.h	2023-07-14 12:34:56.663750711 +0600
+@@ -362,6 +362,11 @@ static inline struct nf_conntrack_net *n
+ 	return net_generic(net, nf_conntrack_net_id);
+ }
+ 
++#ifdef CONFIG_NDPI_HOOK
++void register_ndpi_hook(void (*hook)(struct nf_conn *));
++void unregister_ndpi_hook(void);
++#endif
++
+ #define NF_CT_STAT_INC(net, count)	  __this_cpu_inc((net)->ct.stat->count)
+ #define NF_CT_STAT_INC_ATOMIC(net, count) this_cpu_inc((net)->ct.stat->count)
+ #define NF_CT_STAT_ADD_ATOMIC(net, count, v) this_cpu_add((net)->ct.stat->count, (v))
+diff -urpN linux-6.1.38.old/net/netfilter/Kconfig linux-6.1.38/net/netfilter/Kconfig
+--- linux-6.1.38.old/net/netfilter/Kconfig	2023-07-05 23:27:38.000000000 +0600
++++ linux-6.1.38/net/netfilter/Kconfig	2023-07-14 12:34:11.966879899 +0600
+@@ -76,11 +76,15 @@ config NETFILTER_NETLINK_OSF
+ 	  If this option is enabled, the kernel will include support
+ 	  for passive OS fingerprint via NFNETLINK.
+ 
++config NDPI_HOOK
++	bool
++
+ config NF_CONNTRACK
+ 	tristate "Netfilter connection tracking support"
+ 	default m if NETFILTER_ADVANCED=n
+ 	select NF_DEFRAG_IPV4
+ 	select NF_DEFRAG_IPV6 if IPV6 != n
++	select NDPI_HOOK
+ 	help
+ 	  Connection tracking keeps a record of what packets have passed
+ 	  through your machine, in order to figure out how they are related
+diff -urpN linux-6.1.38.old/net/netfilter/nf_conntrack_core.c linux-6.1.38/net/netfilter/nf_conntrack_core.c
+--- linux-6.1.38.old/net/netfilter/nf_conntrack_core.c	2023-07-05 23:27:38.000000000 +0600
++++ linux-6.1.38/net/netfilter/nf_conntrack_core.c	2023-07-14 12:33:45.580092713 +0600
+@@ -582,9 +582,30 @@ static void destroy_gre_conntrack(struct
+ #endif
+ }
+ 
++#ifdef CONFIG_NDPI_HOOK
++
++static void (*ndpi_hook)(struct nf_conn *) __rcu __read_mostly = NULL;
++
++void register_ndpi_hook(void (*hook)(struct nf_conn *))
++{
++	rcu_assign_pointer(ndpi_hook, hook);
++}
++EXPORT_SYMBOL(register_ndpi_hook);
++
++void unregister_ndpi_hook(void)
++{
++	rcu_assign_pointer(ndpi_hook, NULL);
++}
++
++EXPORT_SYMBOL(unregister_ndpi_hook);
++#endif
++
+ void nf_ct_destroy(struct nf_conntrack *nfct)
+ {
+ 	struct nf_conn *ct = (struct nf_conn *)nfct;
++#ifdef CONFIG_NDPI_HOOK
++	void (*hook)(struct nf_conn *);
++#endif
+ 
+ 	pr_debug("%s(%p)\n", __func__, ct);
+ 	WARN_ON(refcount_read(&nfct->use) != 0);
+@@ -594,6 +615,12 @@ void nf_ct_destroy(struct nf_conntrack *
+ 		return;
+ 	}
+ 
++#ifdef CONFIG_NDPI_HOOK
++	hook = rcu_dereference(ndpi_hook);
++	if (hook)
++		hook(ct);
++#endif
++
+ 	if (unlikely(nf_ct_protonum(ct) == IPPROTO_GRE))
+ 		destroy_gre_conntrack(ct);
+ 

6.6/target/linux/ipq40xx.new/base-files/bin/board_detect

@@ -0,0 +1,14 @@
+#!/bin/sh
+
+CFG=$1
+
+[ -n "$CFG" ] || CFG=/etc/board.json
+
+[ -d "/etc/board.d/" -a ! -s "$CFG" ] && {
+	for a in $(ls /etc/board.d/*); do
+		[ -x $a ] || continue;
+		$(. $a)
+	done
+}
+
+[ -s "$CFG" ] || return 1

6.6/target/linux/ipq40xx.new/base-files/bin/board_modem

@@ -0,0 +1,346 @@
+#!/bin/sh
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+CFG=/etc/board.json
+
+# do not run on preinit/early init
+[ "$EARLY_INIT" ] && return
+
+strstr() {
+  [ "${1#*$2*}" = "$1" ] && return 1
+  return 0
+}
+
+print_array() {
+        json_add_array $1
+        case "$1" in
+                5G_NSA)
+                        for element in $2
+                        do
+                        json_add_string "" "$(echo $element)"
+                        done
+                ;;
+                5G_SA)
+                        for element in $2
+                        do
+                        json_add_string "" "$(echo $element)"
+                        done
+                ;;
+                4G)
+                        for element in $2
+                        do
+                        json_add_string "" "$(echo $element)"
+                        done
+                ;;
+                3G)
+                        for element in $2
+                        do
+                        json_add_string "" "wcdma_$(echo $element)"
+                        done
+                ;;
+                2G)
+                        for element in $2
+                        do
+                        json_add_string "" "$(echo $element)"
+                        done
+                ;;
+        esac
+        json_close_array
+}
+
+gather_band_capabilities() {
+	# Same logic as unhandler.c
+	###################### EG06 #########################
+	if strstr $revision_from_unhandler "EG06E"; then #EG06E
+		lte_bands="1 3 5 7 8 20 28 32 38 40 41" #B
+		trysg_bands="850 900 1800 2100" #MHz
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EG06A"; then #EG06A
+		lte_bands="2 4 5 7 12 13 25 26 29 30 66"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	###################### EC25 #########################
+	elif strstr $revision_from_unhandler "EC25EF"; then #EC25E
+		lte_bands="1 3 5 7 8 20 38 40 41"
+		trysg_bands="850 900 2100"
+		dug_bands="900 1800" #MHz
+	elif strstr $revision_from_unhandler "EC25EC"; then #EC25EC
+		lte_bands="1 3 7 8 20 28"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC25AUX"; then #EC25AUX
+		lte_bands="1 2 3 4 5 7 8 28 40"
+		trysg_bands="850 900 1700 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EC25AFA"; then #EC25A
+		lte_bands="2 4 12"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25V"; then #EC25V
+		lte_bands="4 13"
+		trysg_bands=""
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25AFX"; then #EC25AFX
+		lte_bands="2 4 5 12 13 14 66 71"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25AFF"; then #EC25AF
+		lte_bands="2 4 5 12 13 14 66 71"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25AUTF"; then #EC25AUT
+		lte_bands="1 3 5 7 28"
+		trysg_bands="850 2100"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25AUTL"; then #EC25AUTL
+		lte_bands="3 7 28"
+		trysg_bands=""
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25AUF"; then #EC25AU
+		lte_bands="1 2 3 4 5 7 8 28 40"
+		trysg_bands="850 900 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EC25J"; then #EC25J
+		lte_bands="1 3 8 18 19 26 41"
+		trysg_bands="800 900 2100"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC25EUX"; then #EC25EUX
+		lte_bands="1 3 7 8 20 28 38 40 41"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC25EUF"; then #EC25EU
+		lte_bands="1 3 7 8 20 28 38 40 41"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC25EUG"; then #EC25EU
+		lte_bands="1 3 7 8 20 28 38 40 41"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC25MX"; then #EC25MX
+		lte_bands="2 4 5 7 28 66"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	###################### EC21 #########################
+	elif strstr $revision_from_unhandler "EC21EUX"; then #EC21EUX
+		lte_bands="1 3 7 8 20 28"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC21EU"; then #EC21EU
+		lte_bands="1 3 7 8 20 28"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC21EC"; then #EC21EC
+		lte_bands="1 3 7 8 20 28"
+		trysg_bands="900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC21E"; then #EC21E
+		lte_bands="1 3 5 7 8 20"
+		trysg_bands="850 900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "EC21V"; then #EC21V
+		lte_bands="4 13"
+		trysg_bands=""
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC21KL"; then #EC21KL
+		lte_bands="1 3 5 7 8"
+		trysg_bands=""
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC21J"; then #EC21J
+		lte_bands="1 3 8 18 19 26"
+		trysg_bands=""
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC21AUX"; then #EC21AUX
+		lte_bands="1 2 3 4 5 7 8 28 40"
+		trysg_bands="850 900 1700 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EC21AUT"; then #EC21AUT
+		lte_bands="1 3 5 7 28"
+		trysg_bands="850 2100"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EC21AU"; then #EC21AU
+		lte_bands="1 2 3 4 5 7 8 28 40"
+		trysg_bands="850 900 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EC21A"; then #EC21A
+		lte_bands="2 4 12"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	###################### EG25 #########################
+	elif strstr $revision_from_unhandler "EG25G"; then #EG25G
+		lte_bands="1 2 3 4 5 7 8 12 13 18 19 20 25 26 28 38 39 40 41"
+		trysg_bands="800 850 900 1700 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EG12EA"; then #EG12EA
+		lte_bands="1 3 5 7 8 20 28 38 40 41"
+		trysg_bands="850 900 1800 2100"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "EG12NA"; then #EG12NA
+		lte_bands="2 4 5 7 12 13 14 17 25 26 29 30 41 66 71"
+		trysg_bands="850 1700 1900"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "BG96"; then #BG96M
+		lte_bands="1 2 3 4 5 8 12 13 18 19 20 26 28 39"
+		trysg_bands=""
+		dug_bands="850 900 1800 1900"
+	##################### SLM750 ########################
+	elif strstr $revision_from_unhandler "750VE"; then #SLM750VE
+		lte_bands="1 3 5 7 8 20 40"
+		trysg_bands="850 900 2100"
+		dug_bands="900 1800"
+	elif strstr $revision_from_unhandler "750VAU"; then #SLM750VAU
+		lte_bands="1 3 5 7 8 28 40"
+		trysg_bands="850 900 2100"
+		dug_bands="850 900 1800"
+	elif strstr $revision_from_unhandler "750VA"; then #SLM750VA
+		lte_bands="2 4 5 12 13 17 18 25 26 41"
+		trysg_bands="850 1700 1900"
+		dug_bands="850 1900"
+	elif strstr $revision_from_unhandler "750VJ"; then #SLM750VJ
+		lte_bands="1 3 8 18 19 26 41"
+		trysg_bands="800 900 2100"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "750VSA"; then #SLM750VSA
+		lte_bands="2 4 5 7 8 28 40"
+		trysg_bands="850 900 1900"
+		dug_bands="850 900 1900"
+	###################### UC20 #########################
+	elif strstr $revision_from_unhandler "UC20E"; then #UC20E
+		lte_bands=""
+		trysg_bands="900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "UC20G"; then #UC20G
+		lte_bands=""
+		trysg_bands="800 850 900 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "UC20A"; then #UC20A
+		lte_bands=""
+		trysg_bands="850 1900"
+		dug_bands=""
+	###################### EC200A #########################
+	elif strstr $revision_from_unhandler "EC200AAU"; then #EC200AAU
+		lte_bands="1 2 3 4 5 7 8 28 40 66"
+		trysg_bands="850 900 1700 1900 2100"
+		dug_bands="850 900 1800 1900"
+	elif strstr $revision_from_unhandler "EC200AEU"; then #EC200AEU
+		lte_bands="1 3 5 7 8 20 28 38 40 41"
+		trysg_bands="850 900 2100"
+		dug_bands="900 1800"
+	####################### RG501QEU #######################
+	elif strstr $revision_from_unhandler "RG501QEU"; then #5G module
+		nsa_nr5g_bands="1 3 5 7 8 20 28 38 40 41 77 78"
+		sa_nr5g_bands="1 3 5 7 8 20 28 38 40 41 77 78"
+		lte_bands="1 3 5 7 8 20 28 32 38 40 41 42 43"
+		trysg_bands="2100 850 900"
+		dug_bands=""
+	elif strstr $revision_from_unhandler "RG520NEU"; then #5G module
+		nsa_nr5g_bands="1 3 5 7 8 20 28 38 40 41 75 76 77 78"
+		sa_nr5g_bands="1 3 5 7 8 20 28 38 40 41 75 76 77 78"
+		lte_bands="1 3 5 7 8 20 28 32 38 40 41 42 43"
+		trysg_bands="2100 850 900"
+		dug_bands=""
+	else
+		lte_bands="1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28"
+		trysg_bands="700 800 850 900 1500 1700 2600"
+		dug_bands="1700 1800 1900 2100"
+	fi
+}
+
+validate_service_modes() {
+	json_get_keys service_modes service_modes
+
+	found_modes="$(printf "$service_modes" | awk '!seen[$0]++'| wc -l)"
+	[ "$found_modes" -eq 0 ] && {
+		return 0
+	}
+
+	return 1
+}
+
+#~ Get model name for RUTX products
+setup_modem() {
+	local key="$1"
+	local object_num="$2"
+	local id gps boudrate type desc control product vendor stop_bits
+
+	json_select "$object_num"
+	json_get_vars id product
+
+	if [ "$id" = "$id_from_unhandler" ]; then
+
+		[ -z "$product" ] || \
+		{
+			[ -f "/sys/bus/usb/devices/$id/idVendor" ] && [ -f "/sys/bus/usb/devices/$id/idProduct" ] || {
+				json_select ..
+				return 1
+			}
+
+			validate_service_modes && {
+				gather_band_capabilities
+				json_select_object service_modes
+				[ -z "$nsa_nr5g_bands" ] || print_array "5G_NSA" "$nsa_nr5g_bands"
+				[ -z "$sa_nr5g_bands" ] || print_array "5G_SA" "$sa_nr5g_bands"
+				[ -z "$lte_bands" ] || print_array "4G" "$lte_bands"
+				[ -z "$trysg_bands" ] || print_array "3G" "$trysg_bands"
+				[ -z "$dug_bands" ] || print_array "2G" "$dug_bands"
+				json_select ..
+			}
+			json_select ..
+			return 1
+		}
+
+		vendor="$(cat "/sys/bus/usb/devices/$id/idVendor")"
+		product="$(cat "/sys/bus/usb/devices/$id/idProduct")"
+
+		[ -f "/lib/network/wwan/$vendor:$product" ] && {
+			devicename="$id"
+
+			gather_band_capabilities
+
+			json_set_namespace defaults old_cb
+			json_load "$(cat /lib/network/wwan/$vendor:$product)"
+			json_get_vars gps boudrate type desc control stop_bits
+			json_set_namespace "$old_cb"
+
+			[ "${devicename%%:*}" = "$devicename" ] && {
+				json_add_string vendor "$vendor"
+				json_add_string product "$product"
+				json_add_string gps "$gps"
+				json_add_string stop_bits "$stop_bits"
+				json_add_string boudrate "$boudrate"
+				json_add_string type "$type"
+				json_add_string desc "$desc"
+				json_add_string control "$control"
+				json_add_string	revision "${revision_from_unhandler::-2}"
+				json_add_object service_modes
+				[ -z "$nsa_nr5g_bands" ] || print_array "5G_NSA" "$nsa_nr5g_bands"
+				[ -z "$sa_nr5g_bands" ] || print_array "5G_SA" "$sa_nr5g_bands"
+				[ -z "$lte_bands" ] || print_array "4G" "$lte_bands"
+				[ -z "$trysg_bands" ] || print_array "3G" "$trysg_bands"
+				[ -z "$dug_bands" ] || print_array "2G" "$dug_bands"
+				json_close_object
+			}
+		}
+	fi
+	json_select ..
+}
+
+[ -s "${CFG}" ] || exit 1
+
+id_from_unhandler="$1"
+revision_from_unhandler="$2"
+
+lock /var/run/board_modem.lock
+
+board_config_update
+json_for_each_item setup_modem modems
+board_config_flush
+
+lock -u /var/run/board_modem.lock
+
+exit 0

6.6/target/linux/ipq40xx.new/base-files/bin/board_track

@@ -0,0 +1,47 @@
+#!/bin/sh
+
+. /lib/functions/uci-defaults.sh
+
+CFG=/etc/board.json
+SLP=30
+
+check_modem() {
+	json_select "$2"
+	json_get_vars id
+
+	[ -z "$id" ] && {
+		json_select ..
+		return 0
+	}
+
+	#logger -t "board-track" "ls -d /sys/bus/usb/devices/$id/${id}*/tty?*"
+	ttys=$(ls -d /sys/bus/usb/devices/$id/${id}*/tty?*)
+
+	[ -n "$ttys" ] || { #FAILED TO FIND MODEM
+		logger -t "board-track" "modem $id not detected"
+		for m in /sys/class/gpio/modem*_power; do
+			label="$(basename $m | awk -F_ '{print $1}')"
+			mctl -s -m ${label}
+			sleep 1
+			mctl -p -m ${label}
+		done
+		sleep 5
+		ip link set up dev wwan0 2>&1 >/dev/null
+		ip link set up dev wwan1 2>&1 >/dev/null
+		json_select ..
+		return 1
+	}
+
+	[ -n "$(ip link show dev wwan0 | grep DOWN)" ] && ip link set up dev wwan0 2>&1 >/dev/null
+	[ -n "$(ip link show dev wwan1 | grep DOWN)" ] && ip link set up dev wwan1 2>&1 >/dev/null
+
+	#MODEM UP
+	json_select ..
+}
+
+board_config_update
+while true; do
+	json_for_each_item check_modem modems
+	sleep $SLP
+	[ $SLP -lt 300 ] && SLP=$((SLP+30))
+done

6.6/target/linux/ipq40xx.new/base-files/bin/config_generate

@@ -0,0 +1,824 @@
+#!/bin/sh
+
+CFG=/etc/board.json
+
+. /usr/share/libubox/jshn.sh
+
+[ -s $CFG ] || /bin/board_detect || exit 1
+
+[ -s /etc/config/network ] && \
+[ -s /etc/config/system ] && \
+[ -s /etc/config/hwinfo ] && \
+[ -s /etc/config/blesem ] && \
+[ -s /etc/config/poe ] && \
+exit 0
+
+generate_bridge() {
+	local name=$1
+	local macaddr=$2
+	uci -q batch <<-EOF
+		set network.$name=device
+		set network.$name.name=$name
+		set network.$name.type=bridge
+	EOF
+	if [ -n "$macaddr" ]; then
+		uci -q batch <<-EOF
+			set network.$name.macaddr=$macaddr
+		EOF
+	fi
+}
+
+generate_static_network() {
+	uci -q batch <<-EOF
+		delete network.loopback
+		set network.loopback='interface'
+		set network.loopback.device='lo'
+		set network.loopback.proto='static'
+		set network.loopback.ipaddr='127.0.0.1'
+		set network.loopback.netmask='255.0.0.0'
+	EOF
+
+	if json_is_a dsl object; then
+		json_select dsl
+			if json_is_a atmbridge object; then
+				json_select atmbridge
+					local vpi vci encaps payload nameprefix
+					json_get_vars vpi vci encaps payload nameprefix
+					uci -q batch <<-EOF
+						delete network.atm
+						set network.atm='atm-bridge'
+						set network.atm.vpi='$vpi'
+						set network.atm.vci='$vci'
+						set network.atm.encaps='$encaps'
+						set network.atm.payload='$payload'
+						set network.atm.nameprefix='$nameprefix'
+					EOF
+				json_select ..
+			fi
+
+			if json_is_a modem object; then
+				json_select modem
+					local type annex firmware tone xfer_mode
+					json_get_vars type annex firmware tone xfer_mode
+					uci -q batch <<-EOF
+						delete network.dsl
+						set network.dsl='dsl'
+						set network.dsl.annex='$annex'
+						set network.dsl.firmware='$firmware'
+						set network.dsl.tone='$tone'
+						set network.dsl.xfer_mode='$xfer_mode'
+					EOF
+				json_select ..
+			fi
+		json_select ..
+	fi
+}
+
+ip6assign=
+disable_vlan=
+apply_network_options() {
+	json_select network_options && {
+		json_get_vars ip6assign ula disable_vlan
+		json_select ..
+	}
+	[ -z "$ip6assign" ] && ip6assign=1
+	[ -z "$ula" ] && ula=1
+
+	[ -e /proc/sys/net/ipv6 ] && [ "$ula" = 1 ] && {
+		uci -q batch <<-EOF
+			delete network.globals
+			set network.globals='globals'
+			set network.globals.ula_prefix='auto'
+		EOF
+	}
+}
+
+metric=1
+addr_offset=2
+generate_network() {
+	local ports device macaddr proto type ipaddr netmask vlan no_metric
+	local bridge=$2
+
+	uci -q batch <<-EOF
+		delete "network.$1"
+		set network.$1='interface'
+	EOF
+
+	json_select network
+		json_select "$1"
+			json_get_vars device macaddr proto ipaddr netmask vlan ipv6 guest type
+			json_get_values ports ports
+		json_select ..
+	json_select ..
+
+
+	json_select network_options && {
+		json_get_vars no_metric
+		json_select ..
+	}
+
+	# Force bridge for "lan" as it may have other devices (e.g. wireless)
+	# bridged
+	[ "$1" = "lan" ] && [ -z "$ports" ] && {
+		ports="$device"
+	}
+
+	[ -n "$ports" ] && [ -z "$bridge" ] && {
+
+		[ -n "$macaddr" ] && {
+			for port in $ports; do
+				uci -q batch <<-EOF
+					add network device
+					set network.@device[-1].name='$port'
+					set network.@device[-1].macaddr='$macaddr'
+				EOF
+			done
+		}
+
+		uci -q batch <<-EOF
+			add network device
+			rename network.@device[-1]='br_$1'
+			set network.@device[-1].name='br-$1'
+			set network.@device[-1].type='bridge'
+		EOF
+
+		[ -n "$device" ] && uci add_list network.@device[-1].ports="$device" || {
+			for port in $ports; do
+				uci add_list network.@device[-1].ports="$port"
+			done
+		}
+
+		device=br-$1
+		type=
+		macaddr=""
+
+		json_select hwinfo
+			json_get_vars dsa
+		json_select ..
+
+	}
+
+	if [ -n "$macaddr" ]; then
+		uci -q batch <<-EOF
+			add network device
+			set network.@device[-1].name='$device'
+			set network.@device[-1].macaddr='$macaddr'
+		EOF
+	fi
+
+	uci -q batch <<-EOF
+		delete network.$1
+		set network.$1='interface'
+		set network.$1.type='$type'
+		set network.$1.device='$device'
+		set network.$1.proto='none'
+	EOF
+	[ "$1" != "lan" ] && metric=$((metric+1))
+	[ "$guest" = "1" ] && uci set network.$1.guest='1'
+
+	case "$proto" in
+		static)
+			local ipad metr
+			case "$1" in
+				lan)
+					ipad="192.168.100.1"
+					metr=1
+					;;
+				*)
+					ipad=${ipaddr:-"192.168.$((addr_offset++)).1"}
+					metr="$metric"
+					;;
+			esac
+
+			netm=${netmask:-"255.255.255.0"}
+
+			uci -q batch <<-EOF
+				set network.$1.proto='static'
+				set network.$1.ipaddr='$ipad'
+				set network.$1.netmask='$netm'
+				set network.$1.metric='$metr'
+			EOF
+
+			[ "$ipv6" = "1" ] && uci set network.$1.ipv6="$ipv6"
+			[ -e /proc/sys/net/ipv6 ] && [ "$ip6assign" = 1 ] && \
+				uci set network.$1.ip6assign='60'
+		;;
+
+		dhcp)
+			# fixup IPv6 slave interface if parent is a bridge
+			[ "$type" = "bridge" ] && device="br-$1"
+
+			uci -q batch <<-EOF
+				set network.$1.proto='dhcp'
+				set network.$1.metric='$metric'
+			EOF
+			[ -e /proc/sys/net/ipv6 ] && {
+				metric=$((metric+1))
+				uci -q batch <<-EOF
+					delete network.${1}6
+					set network.${1}6='interface'
+					set network.${1}6.device='$device'
+					set network.${1}6.proto='dhcpv6'
+					set network.${1}6.metric='$metric'
+				EOF
+				[ "$ip6assign" != 1 ] && uci set network.${1}6.delegate='0'
+			}
+		;;
+
+		pppoe)
+			uci -q batch <<-EOF
+				set network.$1.proto='pppoe'
+				set network.$1.username='username'
+				set network.$1.password='password'
+			EOF
+			[ -e /proc/sys/net/ipv6 ] && {
+				uci -q batch <<-EOF
+					set network.$1.ipv6='1'
+					delete network.${1}6
+					set network.${1}6='interface'
+					set network.${1}6.device='@${1}'
+					set network.${1}6.proto='dhcpv6'
+				EOF
+			}
+		;;
+	esac
+
+	[ -n "$no_metric" ] && {
+		uci -q delete network.${1}.metric
+		[ -e /proc/sys/net/ipv6 ] && uci -q delete network.${1}6.metric
+	}
+}
+
+add_modem_section() {
+	local id="$1"
+	local num="$2"
+	local simcount="$3"
+	local builtin="$4"
+	local custom_proto custom_ifname
+
+	json_select ..
+	json_get_vars custom_proto custom_ifname
+	json_select modems
+	for count in $(seq "$simcount"); do
+		interface="mob${num}s${count}a1"
+		local proto="wwan"
+
+		# if needed, use custom proto for rmnet/other devices
+		[ -n "${custom_proto}" ] && proto="${custom_proto}"
+
+		metric=$((metric+1))
+
+		uci_remove network "${interface}"
+		uci_add network interface "${interface}"
+		uci_set network "${interface}" proto "$proto"
+		uci_set network "${interface}" modem "$id"
+		uci_set network "${interface}" metric "$metric"
+		uci_set network "${interface}" sim "${count}"
+		uci_set network "${interface}" dhcpv6 "0"
+		uci_set network "${interface}" pdptype "ip"
+		uci_set network "${interface}" method "nat"
+		uci_set network "${interface}" auth "none"
+		uci_set network "${interface}" auto_apn "1"
+
+		# if needed, use custom ifname for rmnet/other devices
+		[ -n "${custom_ifname}" ] && \
+			uci_set network "${interface}" device "${custom_ifname}"
+
+		uci_commit network
+
+		update_firewall_zone "wan" "$interface"
+		create_multiwan_iface "$interface" "$metric"
+		add_simcard_config "$id" "${count}" "${count}" "$builtin"
+		add_sim_switch_config "$id" "${count}"
+		add_quota_limit_config "$interface"
+	done
+	add_sms_storage_config "$id"
+}
+
+generate_dynamic_lte() {
+[ -f /lib/functions/modem.sh ] || return
+. /lib/functions/modem.sh
+
+	local interface num id simcount builtin
+
+	#creating simcard sections from board.json file
+	if json_is_a modems array; then
+		json_get_keys modems modems
+		json_select modems
+
+		num=1
+
+		for modem in $modems; do
+			json_select "$modem"
+			json_get_vars id simcount builtin
+			json_select ..
+			add_modem_section "$id" "$num" "$simcount" "$builtin"
+			num=$(( num + 1 ))
+		done
+
+		json_select ..
+	else
+		## because of RUTX8 have no default modem
+		# after this script runs out simcard config
+		# must not be empty due to external modems could appear to config
+		echo " " >> /etc/config/simcard
+	fi
+
+	#creating simcard sections from conneted via USB
+	for a in `ls /sys/bus/usb/devices`; do
+		local vendor product
+		[ -f "/sys/bus/usb/devices/$a/idVendor" ] && [ -f "/sys/bus/usb/devices/$a/idProduct" ] || continue
+		vendor=$(cat "/sys/bus/usb/devices/$a/idVendor")
+		product=$(cat "/sys/bus/usb/devices/$a/idProduct")
+		[ -f "/lib/network/wwan/${vendor}:${product}" ] && {
+			add_simcard_config "$a" "1" "0" ""
+			add_sms_storage_config "$a"
+		}
+	done
+}
+
+generate_switch_vlans_ports() {
+	local switch="$1"
+	local port ports role roles num attr val
+
+	#
+	# autogenerate vlans
+	#
+
+	if json_is_a roles array; then
+		json_get_keys roles roles
+		json_select roles
+
+		for role in $roles; do
+			json_select "$role"
+				json_get_vars ports
+			json_select ..
+
+			uci -q batch <<-EOF
+				add network switch_vlan
+				set network.@switch_vlan[-1].device='$switch'
+				set network.@switch_vlan[-1].vlan='$role'
+				set network.@switch_vlan[-1].vid='$role'
+				set network.@switch_vlan[-1].ports='$ports'
+			EOF
+		done
+
+		json_select ..
+	fi
+
+
+	#
+	# write port specific settings
+	#
+
+	if json_is_a ports array; then
+		json_get_keys ports ports
+		json_select ports
+
+		for port in $ports; do
+			json_select "$port"
+				json_get_vars num
+
+				if json_is_a attr object; then
+					json_get_keys attr attr
+					json_select attr
+						uci -q batch <<-EOF
+							add network switch_port
+							set network.@switch_port[-1].device='$switch'
+							set network.@switch_port[-1].port=$num
+						EOF
+
+						for attr in $attr; do
+							json_get_var val "$attr"
+							uci -q set network.@switch_port[-1].$attr="$val"
+						done
+					json_select ..
+				fi
+			json_select ..
+		done
+
+		json_select ..
+	fi
+}
+
+generate_switch() {
+	local key="$1"
+	local vlans
+
+	json_select switch
+	json_select "$key"
+	json_get_vars enable reset blinkrate cpu_port \
+		ar8xxx_mib_type ar8xxx_mib_poll_interval
+
+	[ "$disable_vlan" = 1 ] && enable=0
+	uci -q batch <<-EOF
+		add network switch
+		set network.@switch[-1].name='$key'
+		set network.@switch[-1].reset='$reset'
+		set network.@switch[-1].enable_vlan='$enable'
+		set network.@switch[-1].blinkrate='$blinkrate'
+		set network.@switch[-1].ar8xxx_mib_type='$ar8xxx_mib_type'
+		set network.@switch[-1].ar8xxx_mib_poll_interval='$ar8xxx_mib_poll_interval'
+	EOF
+
+	generate_switch_vlans_ports "$1"
+
+	json_select ..
+	json_select ..
+}
+
+
+generate_static_system() {
+	param=$(/sbin/mnf_info "--name")
+	hostname=${param:0:6}
+	uci -q batch <<-EOF
+		delete system.@system[0]
+		set system.system='system'
+		set system.@system[-1].hostname='$hostname'
+		set system.@system[-1].timezone='UTC'
+		set system.@system[-1].ttylogin='0'
+		set system.@system[-1].log_buffer_size='128'
+		set system.@system[-1].log_size='200'
+		set system.@system[-1].urandom_seed='0'
+
+		delete system.ntp
+		set system.ntp='timeserver'
+		set system.ntp.zoneName='UTC'
+		set system.ntp.enabled='0'
+		set system.ntp.enable_server='0'
+		add_list system.ntp.server='0.pool.ntp.org'
+		add_list system.ntp.server='1.pool.ntp.org'
+		add_list system.ntp.server='2.pool.ntp.org'
+		add_list system.ntp.server='3.pool.ntp.org'
+
+		delete system.debug
+		set system.debug='debug'
+		set system.debug.sms_utils_debug_level='4'
+	EOF
+
+	if json_is_a system object; then
+		json_select system
+			local hostname
+			if json_get_var hostname hostname; then
+				uci -q set "system.@system[-1].hostname=$hostname"
+			fi
+
+			if json_is_a ntpserver array; then
+				local keys key
+				json_get_keys keys ntpserver
+				json_select ntpserver
+					uci -q delete "system.ntp.server"
+
+					for key in $keys; do
+						local server
+						if json_get_var server "$key"; then
+							uci -q add_list "system.ntp.server=$server"
+						fi
+					done
+				json_select ..
+			fi
+		json_select ..
+	fi
+}
+
+generate_rssimon() {
+	local key="$1"
+	local cfg="rssid_$key"
+	local refresh threshold
+
+	json_select rssimon
+	json_select "$key"
+	json_get_vars refresh threshold
+	json_select ..
+	json_select ..
+
+	uci -q batch <<-EOF
+		delete system.$cfg
+		set system.$cfg='rssid'
+		set system.$cfg.dev='$key'
+		set system.$cfg.refresh='$refresh'
+		set system.$cfg.threshold='$threshold'
+	EOF
+}
+
+generate_led() {
+	local key="$1"
+	local cfg="led_$key"
+
+	json_select led
+	json_select "$key"
+	json_get_vars name sysfs type trigger default
+
+	uci -q batch <<-EOF
+		delete system.$cfg
+		set system.$cfg='led'
+		set system.$cfg.name='$name'
+		set system.$cfg.sysfs='$sysfs'
+		set system.$cfg.trigger='$trigger'
+		set system.$cfg.default='$default'
+	EOF
+
+	case "$type" in
+		gpio)
+			local gpio inverted
+			json_get_vars gpio inverted
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='gpio'
+				set system.$cfg.gpio='$gpio'
+				set system.$cfg.inverted='$inverted'
+			EOF
+		;;
+
+		netdev)
+			local device mode
+			json_get_vars device mode
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='netdev'
+				set system.$cfg.mode='$mode'
+				set system.$cfg.dev='$device'
+			EOF
+		;;
+
+		usb)
+			local device
+			json_get_vars device
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='usbdev'
+				set system.$cfg.interval='50'
+				set system.$cfg.dev='$device'
+			EOF
+		;;
+
+		usbport)
+			local ports port
+			json_get_values ports ports
+			uci set system.$cfg.trigger='usbport'
+			for port in $ports; do
+				uci add_list system.$cfg.port=$port
+			done
+		;;
+
+		rssi)
+			local iface minq maxq offset factor
+			json_get_vars iface minq maxq offset factor
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='rssi'
+				set system.$cfg.iface='rssid_$iface'
+				set system.$cfg.minq='$minq'
+				set system.$cfg.maxq='$maxq'
+				set system.$cfg.offset='$offset'
+				set system.$cfg.factor='$factor'
+			EOF
+		;;
+
+		switch)
+			local port_mask speed_mask mode
+			json_get_vars port_mask speed_mask mode
+			uci -q batch <<-EOF
+				set system.$cfg.port_mask='$port_mask'
+				set system.$cfg.speed_mask='$speed_mask'
+				set system.$cfg.mode='$mode'
+			EOF
+		;;
+
+		portstate)
+			local port_state
+			json_get_vars port_state
+			uci -q batch <<-EOF
+				set system.$cfg.port_state='$port_state'
+			EOF
+		;;
+
+		timer|oneshot)
+			local delayon delayoff
+			json_get_vars delayon delayoff
+			uci -q batch <<-EOF
+				set system.$cfg.trigger='$type'
+				set system.$cfg.delayon='$delayon'
+				set system.$cfg.delayoff='$delayoff'
+			EOF
+		;;
+	esac
+
+	json_select ..
+	json_select ..
+}
+
+generate_gpioswitch() {
+	local cfg="$1"
+
+	json_select gpioswitch
+		json_select "$cfg"
+			local name pin default
+			json_get_vars name pin default
+			uci -q batch <<-EOF
+				delete system.$cfg
+				set system.$cfg='gpio_switch'
+				set system.$cfg.name='$name'
+				set system.$cfg.gpio_pin='$pin'
+				set system.$cfg.value='$default'
+			EOF
+		json_select ..
+	json_select ..
+}
+
+generate_hwinfo() {
+	local parameter="$1"
+	local temp
+
+	json_select hwinfo
+		json_get_var temp "$parameter"
+	json_select ..
+
+	uci -q batch <<-EOF
+		set hwinfo.hwinfo='hwinfo'
+		set hwinfo.hwinfo.$parameter='$temp'
+	EOF
+}
+
+set_poe_ports() {
+	json_select "$1"
+		json_get_vars name class budget
+		uci -q batch <<-EOF
+			set poe.port$1='port$1'
+			set poe.port$1.name='$name'
+			set poe.port$1.poe_enable='1'
+			set poe.port$1.class='$class'
+			set poe.port$1.budget='$budget'
+		EOF
+	json_select ..
+}
+
+set_poe_chips(){
+	local keys key
+	uci -q set poe.chip$1=chip$1
+	json_get_keys keys "$1"
+	json_select "$1"
+		for key in $keys; do
+			json_get_var var "$key"
+			uci -q set poe.chip$1.$key="$var"
+		done
+	json_select ..
+}
+
+generate_poe_config(){
+	if json_is_a poe object; then
+		json_select poe
+			json_get_vars chip_count budget poe_ports
+			uci -q batch <<-EOF
+				set poe.poe='poe'
+				set poe.poe.chip_count='$chip_count'
+				set poe.poe.budget='$budget'
+				set poe.poe.poe_ports='$poe_ports'
+			EOF
+			if json_is_a ports array; then
+				#json_for_each_item "set_poe_ports" ports
+				json_select ports
+					idx=1
+					while json_is_a ${idx} object
+					do
+						"set_poe_ports" $idx
+						idx=$(( idx + 1 ))
+					done
+				json_select ..
+			fi
+			if json_is_a poe_chips array; then
+				json_select poe_chips
+					idx=1
+					while json_is_a ${idx} object
+					do
+						"set_poe_chips" $idx
+						idx=$(( idx + 1 ))
+					done
+				json_select ..
+			fi
+		json_select ..
+	fi
+}
+
+generate_bluetooth() {
+	uci -q batch <<-EOF
+		set blesem.general='section'
+		set blesem.general.enabled='0'
+		set blesem.settings='app'
+		set blesem.settings.refresh_time='30000'
+	EOF
+}
+
+add_firewall_zone() {
+	local device
+
+	json_select network
+		json_select "$1"
+			json_get_vars device
+		json_select ..
+	json_select ..
+
+	fw3 -q network "$1" || fw3 -q device "$device" && return
+
+	uci -q batch <<-EOF
+		add firewall zone
+		set firewall.@zone[-1].name='$1'
+		set firewall.@zone[-1].network='$1'
+		set firewall.@zone[-1].input='REJECT'
+		set firewall.@zone[-1].output='ACCEPT'
+		set firewall.@zone[-1].forward='REJECT'
+
+		add firewall forwarding
+		set firewall.@forwarding[-1].src='$1'
+		set firewall.@forwarding[-1].dest='wan'
+
+		add firewall rule
+		set firewall.@rule[-1].name='Allow-DNS-$1'
+		set firewall.@rule[-1].src='$1'
+		set firewall.@rule[-1].dest_port='53'
+		set firewall.@rule[-1].proto='tcp udp'
+		set firewall.@rule[-1].target='ACCEPT'
+
+		add firewall rule
+		set firewall.@rule[-1].name='Allow-DHCP-$1'
+		set firewall.@rule[-1].src='$1'
+		set firewall.@rule[-1].dest_port='67'
+		set firewall.@rule[-1].proto='udp'
+		set firewall.@rule[-1].family='ipv4'
+		set firewall.@rule[-1].target='ACCEPT'
+	EOF
+}
+
+add_dhcp() {
+
+	json_select network
+		json_select "$1"
+			json_get_vars _dhcp
+		json_select ..
+	json_select ..
+
+	[ "$_dhcp" = "true" ] || return
+	uci -q batch <<-EOF
+		set dhcp.$1='dhcp'
+		set dhcp.$1.interface='$1'
+		set dhcp.$1.start='100'
+		set dhcp.$1.limit='150'
+		set dhcp.$1.leasetime='1h'
+	EOF
+}
+
+json_init
+json_load "$(cat ${CFG})"
+
+umask 077
+
+if [ ! -s /etc/config/network ]; then
+	touch /etc/config/network
+	generate_static_network
+	apply_network_options
+
+	json_get_keys keys network
+	for key in $keys; do
+		generate_network $key
+		add_dhcp "$key"
+	done
+
+	json_get_keys keys switch
+	for key in $keys; do generate_switch $key; done
+
+	generate_dynamic_lte
+fi
+
+if [ ! -s /etc/config/system ]; then
+	touch /etc/config/system
+	generate_static_system
+
+	json_get_keys keys rssimon
+	for key in $keys; do generate_rssimon $key; done
+
+	json_get_keys keys gpioswitch
+	for key in $keys; do generate_gpioswitch $key; done
+
+	json_get_keys keys led
+	for key in $keys; do generate_led $key; done
+fi
+
+if [ ! -s /etc/config/hwinfo ]; then
+	touch /etc/config/hwinfo
+	json_get_keys keys hwinfo
+	for key in $keys; do generate_hwinfo $key; done
+fi
+
+if [ ! -s /etc/config/poe ]; then
+	touch /etc/config/poe
+	generate_poe_config
+fi
+
+if [ ! -s /etc/config/blesem ]; then
+	bluetooth=""
+	json_select hwinfo
+	json_get_vars bluetooth
+	[ "$bluetooth" -eq 1 ] && {
+		touch /etc/config/blesem
+		touch /etc/config/ble_devices
+		generate_bluetooth
+	}
+fi
+
+uci commit

6.6/target/linux/ipq40xx.new/base-files/bin/ipcalc.sh

@@ -0,0 +1,71 @@
+#!/bin/sh
+
+awk -f - $* <<EOF
+function bitcount(c) {
+	c=and(rshift(c, 1),0x55555555)+and(c,0x55555555)
+	c=and(rshift(c, 2),0x33333333)+and(c,0x33333333)
+	c=and(rshift(c, 4),0x0f0f0f0f)+and(c,0x0f0f0f0f)
+	c=and(rshift(c, 8),0x00ff00ff)+and(c,0x00ff00ff)
+	c=and(rshift(c,16),0x0000ffff)+and(c,0x0000ffff)
+	return c
+}
+
+function ip2int(ip) {
+	for (ret=0,n=split(ip,a,"\."),x=1;x<=n;x++) ret=or(lshift(ret,8),a[x])
+	return ret
+}
+
+function int2ip(ip,ret,x) {
+	ret=and(ip,255)
+	ip=rshift(ip,8)
+	for(;x<3;ret=and(ip,255)"."ret,ip=rshift(ip,8),x++);
+	return ret
+}
+
+function compl32(v) {
+	ret=xor(v, 0xffffffff)
+	return ret
+}
+
+BEGIN {
+	slpos=index(ARGV[1],"/")
+	if (slpos == 0) {
+		ipaddr=ip2int(ARGV[1])
+		dotpos=index(ARGV[2],".")
+		if (dotpos == 0)
+			netmask=compl32(2**(32-int(ARGV[2]))-1)
+		else
+			netmask=ip2int(ARGV[2])
+	} else {
+		ipaddr=ip2int(substr(ARGV[1],0,slpos-1))
+		netmask=compl32(2**(32-int(substr(ARGV[1],slpos+1)))-1)
+		ARGV[4]=ARGV[3]
+		ARGV[3]=ARGV[2]
+	}
+
+	network=and(ipaddr,netmask)
+	broadcast=or(network,compl32(netmask))
+
+	start=or(network,and(ip2int(ARGV[3]),compl32(netmask)))
+	limit=network+1
+	if (start<limit) start=limit
+
+	end=start+ARGV[4]
+	limit=or(network,compl32(netmask))-1
+	if (end>limit) end=limit
+
+	print "IP="int2ip(ipaddr)
+	print "NETMASK="int2ip(netmask)
+	print "BROADCAST="int2ip(broadcast)
+	print "NETWORK="int2ip(network)
+	print "PREFIX="32-bitcount(compl32(netmask))
+
+	# range calculations:
+	# ipcalc <ip> <netmask> <start> <num>
+
+	if (ARGC > 3) {
+		print "START="int2ip(start)
+		print "END="int2ip(end)
+	}
+}
+EOF

6.6/target/linux/ipq40xx.new/base-files/etc/board.d/02_network

@@ -0,0 +1,235 @@
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/system.sh
+
+ipq40xx_setup_interfaces()
+{
+	local board="$1"
+
+	case "$board" in
+	8dev,habanero-dvk|\
+	avm,fritzbox-4040|\
+	asus,rt-ac42u|\
+	asus,rt-ac58u|\
+	linksys,ea6350v3|\
+	linksys,ea8300|\
+	linksys,mr8300|\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	mikrotik,hap-ac3-lte6-kit|\
+	p2w,r619ac-64m|\
+	p2w,r619ac-128m|\
+	pakedge,wr-1|\
+	teltonika,rutx|\
+	teltonika,rutx12|\
+	teltonika,rutx50|\
+	zyxel,nbg6617)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		;;
+	8dev,jalapeno|\
+	alfa-network,ap120c-ac|\
+	asus,map-ac2200|\
+	cilab,meshpoint-one|\
+	edgecore,ecw5211|\
+	glinet,gl-ap1300|\
+	glinet,gl-b2200|\
+	google,wifi|\
+	linksys,whw03v2|\
+	luma,wrtq-329acn|\
+	mikrotik,cap-ac|\
+	netgear,wac510|\
+	sony,ncp-hg100-cellular|\
+	wallys,dr40x9|\
+	zte,mf18a|\
+	zte,mf289f)
+		ucidef_set_interfaces_lan_wan "lan" "wan"
+		;;
+	aruba,ap-303|\
+	aruba,ap-365|\
+	avm,fritzrepeater-1200|\
+	dlink,dap-2610|\
+	extreme-networks,ws-ap3915i|\
+	meraki,mr33|\
+	meraki,mr74|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac|\
+	netgear,ex6100v2|\
+	netgear,ex6150v2)
+		ucidef_set_interface_lan "lan"
+		;;
+	avm,fritzbox-7530)
+		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
+		;;
+	avm,fritzrepeater-3000|\
+	cellc,rtl30vw)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	compex,wpj428)
+		ucidef_set_interface_lan "lan1 lan2"
+		;;
+	linksys,whw01)
+		ucidef_set_interface_lan "eth1 eth2"
+		;;
+	glinet,gl-a1300|\
+	glinet,gl-b1300|\
+	mobipromo,cm520-79f)
+		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
+		;;
+	mikrotik,wap-ac|\
+	mikrotik,wap-ac-lte|\
+	mikrotik,wap-r-ac)
+		ucidef_set_interface_lan "sw-eth1 sw-eth2"
+		;;
+	aruba,ap-303h|\
+	buffalo,wtr-m2133hp|\
+	ezviz,cs-w3-wd1200g-eup|\
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60|\
+	teltonika,rutx10)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		;;
+	openmesh,a42|\
+	openmesh,a62)
+		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
+		;;
+	plasmacloud,pa1200|\
+	plasmacloud,pa2200)
+		ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
+		;;
+	qxwlan,e2600ac-c1)
+		ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
+		;;
+	qxwlan,e2600ac-c2)
+		ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
+		;;
+	zte,mf286d)
+		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not initialized"
+		;;
+	esac
+}
+
+ipq40xx_setup_dsl()
+{
+	local board="$1"
+	local annex="j"
+	local tone="b"
+	local xfer_mode=""
+
+	case "$board" in
+	avm,fritzbox-7530)
+		;;
+	*)
+		return 0
+		;;
+	esac
+
+	ucidef_add_atm_bridge "1" "32" "llc" "bridged" "dsl"
+	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
+	ucidef_set_interface_wan "dsl0" "pppoe"
+}
+
+ipq40xx_setup_macs()
+{
+	local board="$1"
+	local lan_mac=""
+	local wan_mac=""
+	local label_mac=""
+
+	case "$board" in
+	8dev,habanero-dvk)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	asus,rt-ac42u)
+		label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		;;
+	asus,rt-ac58u)
+		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
+		label_mac=$wan_mac
+		;;
+	avm,fritzbox-7530)
+		local tffsdev=$(find_mtd_chardev "nand-tffs")
+		wan_mac=$(/usr/bin/fritz_tffs_nand -b -d $tffsdev -n macdsl)
+		;;
+	cilab,meshpoint-one)
+		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
+		;;
+	devolo,magic-2-wifi-next)
+		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
+		label_mac=$lan_mac
+		;;
+	dlink,dap-2610)
+		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
+		label_mac=$lan_mac
+		;;
+	engenius,eap2200|\
+	engenius,emd1)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$lan_mac
+		;;
+	engenius,emr3500)
+		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
+		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		label_mac=$wan_mac
+		;;
+	engenius,ens620ext)
+		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	ezviz,cs-w3-wd1200g-eup)
+		label_mac=$(mtd_get_mac_binary "ART" 0x6)
+		;;
+	google,wifi)
+		wan_mac=$(get_mac_label)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	linksys,ea6350v3|\
+	linksys,ea8300  |\
+	linksys,mr8300)
+		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		lan_mac=$(macaddr_add "$wan_mac" 1)
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2|\
+	mikrotik,hap-ac3|\
+	mikrotik,hap-ac3-lte6-kit)
+		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		lan_mac=$(macaddr_add $wan_mac 1)
+		label_mac="$wan_mac"
+		;;
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac)
+		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
+		label_mac="$lan_mac"
+		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60|\
+	pakedge,wr-1)
+		wan_mac=$(macaddr_add $(get_mac_label) 1)
+		;;
+	esac
+
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
+	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
+}
+
+board_config_update
+board=$(board_name)
+ipq40xx_setup_interfaces $board
+ipq40xx_setup_dsl $board
+ipq40xx_setup_macs $board
+board_config_flush
+
+exit 0

6.6/target/linux/ipq40xx.new/base-files/etc/board.d/1-board_json

@@ -0,0 +1,515 @@
+#!/bin/sh
+#
+# Copyright (c) 2015 The Linux Foundation. All rights reserved.
+# Copyright (c) 2011-2015 OpenWrt.org
+#
+
+. /lib/functions/uci-defaults.sh
+. /lib/functions/teltonika-defaults.sh
+. /lib/functions/system.sh
+
+[ -f /lib/functions/target-defaults.sh ] && \
+	. /lib/functions/target-defaults.sh
+
+setup_json() {
+	local model="$1"
+
+	case "$model" in
+	RUTX08*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo usb ethernet ios
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX09*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		ucidef_add_static_modem_info "$model" "3-1" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo dual_sim usb gps mobile ethernet ios
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX10*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_set_hwinfo bluetooth usb wifi dual_band_ssid ethernet ios
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX11*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_add_static_modem_info "$model" "3-1" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo dual_sim usb gps mobile wifi dual_band_ssid bluetooth ethernet ios
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTXR1*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_add_static_modem_info "$model" "3-1" "2" "primary"
+		ucidef_set_hwinfo dual_sim usb mobile wifi dual_band_ssid ethernet sfp_port sfp_switch console rs232
+		ucidef_set_usb_jack "/usb1/1-1/1-1.2/"
+		ucidef_add_serial_capabilities "rs232" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200" \
+			"7 8" \
+			"rts/cts xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/usb1/1-1/1-1.3/"
+		ucidef_set_release_version "2.3.1"
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX12*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		# builtin and primary should be first modem
+		ucidef_add_static_modem_info "$model" "3-1" "1" "primary" "gps_out"
+		ucidef_add_static_modem_info "$model" "1-1.2" "1"
+		ucidef_set_usb_jack "/usb1/1-1/1-1.3/"
+		ucidef_set_hwinfo usb gps mobile wifi dual_band_ssid bluetooth ethernet ios dual_modem
+		ucidef_set_release_version "2.3.1"
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX14*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_add_static_modem_info "$model" "1-1" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb3/3-1/"
+		ucidef_set_hwinfo usb gps dual_sim mobile wifi dual_band_ssid bluetooth ethernet ios at_sim
+		ucidef_set_release_version "2.6.1"
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX18*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_add_static_modem_info "$model" "2-1" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo usb gps dual_sim mobile wifi dual_band_ssid bluetooth ethernet ios
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	RUTX50*)
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_switch "switch0" \
+			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
+		ucidef_add_wlan_bssid_limit "wlan0" 16
+		ucidef_add_wlan_bssid_limit "wlan1" 16
+		ucidef_add_static_modem_info "$model" "2-1" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb3/3-1/"
+		ucidef_set_hwinfo dual_sim usb gps mobile wifi dual_band_ssid ethernet ios at_sim
+		ucidef_set_release_version "7.2.8"
+		ucidef_set_network_options "vlans" 128 "readonly_vlans" 2
+		;;
+	TRB2*)
+		ucidef_set_led_switch "lan" "LAN" "eth_led" "switch0" "0x04"
+		ucidef_set_interface_lan "eth0"
+		ucidef_add_static_modem_info "$model" "1-1.4" "2" "primary" "gps_out"
+		ucidef_add_serial_capabilities "rs232" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200" \
+			"7 8" \
+			"rts/cts xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/usb1/1-1/1-1.3/"
+		ucidef_add_serial_capabilities "rs485" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200 \
+			 230400 460800 921600 1000000 3000000" \
+			"7 8" \
+			"none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/usb1/1-1/1-1.2/"
+		ucidef_set_hwinfo dual_sim mobile gps ethernet ios rs232 rs485
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	RUT361* |\
+	RUT200* |\
+	RUT241* |\
+	RUT260*)
+		ucidef_set_led_switch "lan" "LAN" "eth1_led" "switch0" "0x2"
+		ucidef_set_led_switch "wan" "WAN" "eth2_led" "switch0" "0x1"
+		ucidef_add_switch "switch0" "1:lan" "0:wan:2" "6@eth0"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary config 0x0)"
+		ucidef_set_interface_default_macaddr "wan" "$(macaddr_add "$(mtd_get_mac_binary config 0x0)" 1)"
+		ucidef_add_static_modem_info "$model" "1-1" "1" "primary"
+		[ "${model:6:1}" = "1" ] && ucidef_set_hwinfo mobile wifi \
+		ethernet || ucidef_set_hwinfo mobile wifi ethernet ios
+		[ "${model:4:2}" = "60" ] && ucidef_set_release_version "7.4.2"
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 2
+		;;
+	RUT2*)
+		ucidef_set_led_switch "lan" "LAN" "lan_led" "switch0" "0x04"
+		ucidef_set_led_netdev "wan" "WAN" "wan_led" "eth1"
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_static_modem_info "$model" "1-1" "1" "primary"
+		[ "${model:6:1}" = "1" ] && ucidef_set_hwinfo mobile wifi \
+		ethernet || ucidef_set_hwinfo mobile wifi ethernet ios
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	RUT300*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x02"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x10"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x08"
+		ucidef_set_led_switch "lan4" "LAN4" "eth4_led" "switch0" "0x04"
+		ucidef_set_led_netdev "wan" "WAN" "wan_led" "eth1"
+		ucidef_set_interface_wan "eth1"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
+		ucidef_set_hwinfo usb ethernet ios
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	RUT301*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x01"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x02"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x04"
+		ucidef_set_led_switch "lan4" "LAN4" "eth4_led" "switch0" "0x08"
+		ucidef_set_led_switch "wan"  "WAN"  "wan_led"  "switch0" "0x10"
+		ucidef_add_switch "switch0" "0:lan:1" "1:lan:2" "2:lan:3" \
+			"3:lan:4" "4:wan" "6@eth0"
+		ucidef_set_usb_jack "/usb2/2-1/"
+		ucidef_set_interface_default_macaddr "wan" "$(macaddr_add "$(mtd_get_mac_binary config 0x0)" 1)"
+		ucidef_set_hwinfo usb ethernet ios
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 2
+		;;
+	RUT360*)
+		ucidef_set_led_switch "lan" "LAN" "eth1_led" "switch0" "0x10"
+		ucidef_set_led_netdev "wan" "WAN" "eth2_led" "eth1"
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_wlan_bssid_limit "wlan1" 8
+		ucidef_add_static_modem_info "$model" "1-1" "1" "primary"
+		ucidef_set_hwinfo mobile wifi dual_band_ssid ethernet ios
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	RUT950*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x10"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x08"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x04"
+		ucidef_set_led_netdev "wan" "WAN" "wan_led" "eth1"
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_switch "switch0" "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		ucidef_add_static_modem_info "$model" "1-1" "2" "primary"
+		[ "${model:7:2}" = "06" ] && ucidef_set_hwinfo dual_sim mobile \
+		wifi ethernet || ucidef_set_hwinfo dual_sim mobile wifi ethernet ios
+		ucidef_set_network_options "vlans" 15 "readonly_vlans" 1
+		;;
+	RUT955*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x10"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x08"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x04"
+		ucidef_set_led_netdev "wan" "WAN" "wan_led" "eth1"
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_switch "switch0" "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
+		ucidef_set_usb_jack "/usb1/1-1/1-1.1/"
+		ucidef_add_static_modem_info "$model" "1-1.4" "2" "primary" "gps_out"
+		[ "${model:7:2}" = "06" ] && ucidef_set_hwinfo dual_sim usb gps sd_card \
+		mobile wifi ethernet rs232 rs485 || ucidef_set_hwinfo dual_sim usb gps sd_card \
+						mobile wifi ethernet ios rs232 rs485
+		ucidef_add_serial_capabilities "rs232" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200" \
+			"5 6 7 8" \
+			"rts/cts xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/usb1/1-1/1-1.3/"
+		ucidef_add_serial_capabilities "rs485" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200 \
+			 230400 460800 921600 1000000 3000000" \
+			"8" \
+			"none" \
+			"1 2" \
+			"even odd none" \
+			"/tty/ttyATH1"
+		ucidef_set_network_options "vlans" 15 "readonly_vlans" 1
+		;;
+	RUT901* |\
+	RUT951*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x01"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x02"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x04"
+		ucidef_set_led_switch "wan"  "WAN"  "wan_led"  "switch0" "0x10"
+		ucidef_add_switch "switch0" "0:lan:1" "1:lan:2" "2:lan:3" "4:wan" "6@eth0"
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary config 0x0)"
+		ucidef_set_interface_default_macaddr "wan" "$(macaddr_add "$(mtd_get_mac_binary config 0x0)" 1)"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_static_modem_info "$model" "1-1" "2" "primary"
+		[ "${model:7:1}" = "6" ] && ucidef_set_hwinfo dual_sim mobile \
+		wifi ethernet || ucidef_set_hwinfo dual_sim mobile wifi ethernet ios
+		[ "${model:4:2}" = "01" ] && ucidef_set_release_version "7.3.1"
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 2
+		;;
+	RUT906* |\
+	RUT956*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x01"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x02"
+		ucidef_set_led_switch "lan3" "LAN3" "eth3_led" "switch0" "0x04"
+		ucidef_set_led_switch "wan"  "WAN"  "wan_led"  "switch0" "0x10"
+		ucidef_add_switch "switch0" "0:lan:1" "1:lan:2" "2:lan:3" "4:wan" "6@eth0"
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary config 0x0)"
+		ucidef_set_usb_jack "/usb1/1-1/1-1.1/"
+		ucidef_set_interface_default_macaddr "wan" "$(macaddr_add "$(mtd_get_mac_binary config 0x0)" 1)"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_static_modem_info "$model" "1-1.4" "2" "primary" "gps_out"
+		[ "${model:7:1}" = "6" ] && ucidef_set_hwinfo dual_sim usb gps \
+		mobile wifi ethernet rs232 rs485 || ucidef_set_hwinfo dual_sim usb gps \
+						mobile wifi ethernet ios rs232 rs485
+		[ "${model:4:2}" = "06" ] && ucidef_set_release_version "7.4.2"
+		ucidef_add_serial_capabilities "rs232" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200" \
+			"5 6 7 8" \
+			"rts/cts xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/usb1/1-1/1-1.3/"
+		ucidef_add_serial_capabilities "rs485" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200 230400" \
+			"5 6 7 8" \
+			"xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/tty/ttyS1"
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 2
+		;;
+	TRB140*)
+		ucidef_set_interface_lan "eth0 rndis0"
+		[ "${model:7:1}" = "2" ] && ucidef_set_hwinfo mobile ethernet || \
+			ucidef_set_hwinfo mobile ethernet ios
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		[ "${model:6:1}" = "4" ] && \
+			ucidef_set_release_version "7.4.2"
+		;;
+	TRB143*)
+		ucidef_set_interface_lan "eth0 rndis0"
+		[ "${model:7:1}" = "2" ] && ucidef_set_hwinfo mobile ethernet || \
+			ucidef_set_hwinfo mobile ethernet ios
+		ucidef_add_serial_capabilities "mbus" \
+			"300 600 1200 2400 4800 9600 19200 38400" \
+			"5 6 7 8" \
+			"xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/tty/ttyHS0"
+		if [ "${model:6:1}" = "4" ]; then
+			ucidef_set_release_version "7.4.3"
+		else
+			ucidef_set_release_version "7.1.7"
+		fi
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	TRB141*)
+		ucidef_set_interface_lan "rndis0"
+		ucidef_set_hwinfo mobile ios
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		[ "${model:6:1}" = "4" ] && \
+			ucidef_set_release_version "7.4.3"
+		;;
+	TRB142*)
+		ucidef_set_interface_lan "rndis0"
+		[ "${model:7:1}" = "2" ] && ucidef_set_hwinfo mobile rs232 || \
+			ucidef_set_hwinfo mobile ios rs232
+		ucidef_add_serial_capabilities "rs232" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200" \
+			"5 6 7 8" \
+			"rts/cts xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/tty/ttyHS0"
+		if [ "${model:6:1}" = "3" ]; then
+			ucidef_set_release_version "7.1"
+		elif [ "${model:6:1}" = "4" ]; then
+			ucidef_set_release_version "7.4.3"
+		fi
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	TRB145*)
+		ucidef_set_interface_lan "rndis0"
+		[ "${model:7:1}" = "2" ] && ucidef_set_hwinfo mobile rs485 || \
+			ucidef_set_hwinfo mobile ios rs485
+		ucidef_add_serial_capabilities "rs485" \
+			"300 600 1200 2400 4800 9600 19200 38400 57600 115200 \
+			 230400 460800 921600 1000000 3000000" \
+			"5 6 7 8" \
+			"xon/xoff none" \
+			"1 2" \
+			"even odd mark space none" \
+			"/tty/ttyHS0"
+		if [ "${model:6:1}" = "2" ]; then
+			ucidef_set_release_version "7.1"
+		elif [ "${model:6:1}" = "4" ]; then
+			ucidef_set_release_version "7.4.3"
+		fi
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	TCR100*)
+		ucidef_set_led_switch "lan" "LAN" "eth1_led" "switch0" "0x10"
+		ucidef_set_led_netdev "wan" "WAN" "eth2_led" "eth1"
+		ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_wlan_bssid_limit "wlan1" 8
+		ucidef_set_interface guest proto static type bridge \
+		guest 1 _wireless true _dhcp true
+		ucidef_add_static_modem_info "$model" "1-1" "1" "primary"
+		ucidef_set_hwinfo mobile wifi dual_band_ssid wps ethernet
+		ucidef_set_release_version "7.2.4"
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	OTD140*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x10"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x2"
+		ucidef_add_switch "switch0" "4:lan:1" "1:lan:2" "6@eth0"
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary config 0x0)"
+		ucidef_set_interface "lan" "default_ip" "%%LAN_IP%%"
+		ucidef_add_static_modem_info "$model" "1-1" "2" "primary"
+		ucidef_set_hwinfo ethernet mobile dual_sim poe
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		ucidef_set_poe 2 15400 1 "lan2" "3" 15400
+		ucidef_set_poe_chip "0X77" "0:lan2"
+		ucidef_set_poe_chip "0X2F" "1:lan2"
+		;;
+	OTD160*)
+		ucidef_set_led_switch "lan1" "LAN1" "eth1_led" "switch0" "0x04"
+		ucidef_set_led_switch "lan2" "LAN2" "eth2_led" "switch0" "0x02"
+		ucidef_set_interface_lan "eth0"
+		ucidef_add_wlan_bssid_limit "wlan0" 8
+		ucidef_add_wlan_bssid_limit "wlan1" 8
+		ucidef_add_static_modem_info "$model" "1-1" "2" "primary"
+		ucidef_set_hwinfo dual_sim mobile wifi dual_band_ssid ethernet
+		ucidef_set_network_options "vlans" 16 "readonly_vlans" 1
+		;;
+	TAP100*)
+		ucidef_set_led_switch "lan" "LAN" "eth0_led" "switch0" "0x10"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_set_interface_lan "eth0"
+		ucidef_set_interface "lan" "ipv6" "1"
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary config 0x0)"
+		ucidef_set_hwinfo wifi ethernet sw_rst_on_init
+		ucidef_set_network_options "ula" false "disable_vlan" true "ip6assign" false "vlans" 16 "readonly_vlans" 1 "no_metric" true
+		ucidef_set_interface "dhcp" "device" "@lan" "proto" "dhcp"
+		;;
+	TRB500*)
+		ucidef_set_interface_lan "eth0 ecm0"
+		ucidef_set_interface_default_macaddr "lan" "$(mtd_get_mac_binary mnf_info 0x0)" \
+			"$(macaddr_add "$(mtd_get_mac_binary mnf_info 0x0)" 1)"
+		ucidef_set_hwinfo mobile ethernet ios
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM50*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		ucidef_set_usb_jack "/usb1/1-2/"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_add_static_modem_info "$model" "2-1" "2" "primary" "gps_out"
+		ucidef_set_hwinfo usb ethernet ios gps mobile wifi dual_band_ssid dual_sim at_sim dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM51*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		ucidef_set_usb_jack "/usb1/1-2/"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_add_static_modem_info "$model" "2-1" "2" "primary"
+		ucidef_set_hwinfo usb ethernet ios mobile wifi dual_band_ssid dual_sim at_sim dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		ucidef_set_release_version "7.4.4"
+		;;
+	RUTM08*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo usb ethernet ios dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM09*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		ucidef_add_static_modem_info "$model" "1-2" "2" "primary" "gps_out"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_set_hwinfo usb ethernet ios gps mobile dual_sim dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM10*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_set_hwinfo usb ethernet ios wifi dual_band_ssid dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM11*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
+		ucidef_set_usb_jack "/usb1/1-1/"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_add_static_modem_info "$model" "1-2" "2" "primary" "gps_out"
+		ucidef_set_hwinfo usb ethernet ios gps mobile wifi dual_band_ssid dual_sim dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	RUTM12*)
+		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+		ucidef_set_usb_jack "/usb1/1-2/1-2.3/"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_add_static_modem_info "$model" "1-1" "1" "primary" "gps_out"
+		ucidef_add_static_modem_info "$model" "1-2.2" "1"
+		ucidef_set_hwinfo usb ethernet ios gps mobile wifi dual_band_ssid dual_modem dsa hw_nat
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+
+	x86)
+		ucidef_set_interface_wan "eth0"
+		ucidef_set_interface_lan "eth1"
+		ucidef_add_wlan_bssid_limit "wlan0" 4
+		ucidef_add_wlan_bssid_limit "wlan1" 4
+		ucidef_set_hwinfo usb wifi dual_band_ssid ethernet
+		ucidef_set_network_options "vlans" 4094 "readonly_vlans" 1
+		;;
+	*)
+		echo "Unsupported hardware. Network interfaces not intialized"
+		;;
+	esac
+
+	ucidef_set_interface "lan" "default_ip" "%%LAN_IP%%"
+
+	type ucidef_target_defaults &> /dev/null && \
+		ucidef_target_defaults "$model"
+}
+
+#~ Get model name for RUTX products
+if ! model="$(mnf_info --name)" 2>/dev/null; then
+	model="$(mnf_info --prod-code)" 2>/dev/null
+fi
+
+platform="$(cat /proc/device-tree/platform)" 2>/dev/null
+
+board_config_update
+setup_json "$model"
+
+ucidef_set_board_platform "$platform"
+
+board_config_flush
+
+exit 0

6.6/target/linux/ipq40xx.new/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -0,0 +1,332 @@
+#!/bin/sh
+
+ath10kcal_die() {
+	echo "ath10cal: " "$*"
+	exit 1
+}
+
+ath10kcal_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath10kcal_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE iflag=skip_bytes bs=$count skip=$offset count=1 2>/dev/null || \
+		ath10kcal_die "failed to extract calibration data from $mtd"
+}
+
+ensure_correct_art() {
+	# NOTE(rytis): Hardcoded hashes for 64 KiB file, filled with zeroes (md5b0) and ones (md5b1).
+	local md5b0="fcd6bcb56c1689fcef28b57c22475bad"
+	local md5b1="ecb99e6ffea7be1e5419350f725da86b"
+	local artdir="/dev/mtd12"
+	local bindir="/usr/share/art/art_rutx.bin"
+	local md5art="$(md5sum $artdir)"
+	md5art="${md5art%% *}"
+	local devicename="$(mnf_info -n)"
+	devicename="${devicename:0:6}"
+
+	if [ "$devicename" != "RUTX08" ] && [ "$devicename" != "RUTX09" ]; then
+		if [ "$md5art" == "$md5b0" ] || [ "$md5art" == "$md5b1" ] && [ -e "$bindir" ]; then
+			mtd write $bindir $artdir
+		fi
+	else
+		if [ "$md5art" != "$md5b0" ] && [ "$md5art" != "$md5b1" ]; then
+			mtd erase $artdir
+		fi
+	fi
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+ensure_correct_art
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x9000 0x844
+		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
+		;;
+	esac
+	;;
+"ath10k/pre-cal-pci-0000:01:00.0.bin")
+	case "$board" in
+	asus,map-ac2200)
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
+		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+		;;
+	asus,rt-ac42u)
+		caldata_extract_ubi "Factory" 0x9000 0x2f20
+		;;
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x9000 0x2f20
+		# OEM assigns 4 sequential MACs
+		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
+		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x9000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x12)
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a800000.wifi.bin")
+	case "$board" in
+	qcom,ap-dk01.1-c1)
+		caldata_extract "ART" 0x1000 0x2f20
+		;;
+	asus,map-ac2200|\
+	asus,rt-ac42u|\
+	asus,rt-ac58u)
+		caldata_extract_ubi "Factory" 0x1000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	cellc,rtl30vw)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
+		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
+		;;
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x1000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x0 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x0 0x2f20 )
+		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0x0)
+		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 2)
+		;;
+	teltonika,rutx10|\
+	teltonika,rutx50)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 2)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x1000 0x2f20
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
+		;;
+	teltonika,rutx12 |\
+	teltonika,rutx)
+		ath10kcal_extract "0:ART" 4096 12064
+		;;
+	esac
+	;;
+"ath10k/pre-cal-ahb-a800000.wifi.bin")
+	case "$board" in
+	qcom,ap-dk01.1-c1)
+		caldata_extract "ART" 0x5000 0x2f20
+		;;
+	asus,map-ac2200|\
+	asus,rt-ac58u)
+		caldata_extract_ubi "Factory" 0x5000 0x2f20
+		;;
+	avm,fritzbox-4040)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
+		;;
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000)
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
+		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
+		;;
+	cellc,rtl30vw)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		;;
+	devolo,magic-2-wifi-next)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
+		;;
+	dlink,dap-2610)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+		;;
+	engenius,emd1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
+		;;
+	engenius,emr3500)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
+		;;
+	engenius,ens620ext)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
+		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+		;;
+	linksys,ea8300 |\
+	linksys,mr8300)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
+		;;
+	meraki,mr33 |\
+	meraki,mr74)
+		caldata_extract_ubi "ART" 0x5000 0x2f20
+		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
+		;;
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x8000 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x0 0x2f20 )
+		;;
+	netgear,rbr50|\
+	netgear,rbs50|\
+	netgear,srr60|\
+	netgear,srs60)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mmc_get_mac_binary ARTMTD 0xc)
+		;;
+	pakedge,wr-1)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(get_mac_label) 4)
+		;;
+	teltonika,rutx10|\
+	teltonika,rutx50)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:CONFIG" 0x0) 3)
+		;;
+	sony,ncp-hg100-cellular)
+		caldata_extract_mmc "0:ART" 0x5000 0x2f20
+		;;
+	zyxel,nbg6617 |\
+	zyxel,wre6606)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
+		;;
+	teltonika,rutx12 |\
+	teltonika,rutx)
+		ath10kcal_extract "0:ART" 20480 12064
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a000000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0x2f20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_0" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+"ath10k/QCA4019/hw1.0/board-ahb-a800000.wifi.bin")
+	case "$board" in
+	mikrotik,cap-ac |\
+	mikrotik,hap-ac2 |\
+	mikrotik,hap-ac3 |\
+	mikrotik,hap-ac3-lte6-kit |\
+	mikrotik,sxtsq-5-ac |\
+	mikrotik,wap-ac |\
+	mikrotik,wap-ac-lte |\
+	mikrotik,wap-r-ac)
+		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
+		( [ -f "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data" 0xaf20 0x2f20 ) || \
+		( [ -d "$wlan_data" ] && caldata_sysfsload_from_file "$wlan_data/data_2" 0x2f20 0x2f20 )
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac

6.6/target/linux/ipq40xx.new/base-files/etc/hotplug.d/ieee80211/09_fix_wifi_mac

@@ -0,0 +1,23 @@
+#!/bin/ash
+
+[ "$ACTION" == "add" ] || exit 0
+
+PHYNBR=${DEVPATH##*/phy}
+
+[ -n $PHYNBR ] || exit 0
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(board_name)
+
+case "$board" in
+	teltonika,rutx)
+		mac_addr=$(mtd_get_mac_binary 0:CONFIG 0)
+		if [ "$mac_addr" != "ff:ff:ff:ff:ff:ff" ]; then
+			echo $(macaddr_add $mac_addr $(($PHYNBR + 2)) ) > /sys${DEVPATH}/macaddress
+		fi
+		;;
+	*)
+		;;
+esac

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/boot

@@ -0,0 +1,70 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006-2011 OpenWrt.org
+
+START=10
+STOP=90
+
+uci_apply_defaults() {
+	. /lib/functions/system.sh
+
+	cd /etc/uci-defaults || return 0
+	files="$(find . -type f | sort)"
+	[ -z "$files" ] && return 0
+	mkdir -p /tmp/.uci
+	for file in $files; do
+		( . "./$file" ) && rm -f "$file"
+	done
+	uci commit
+}
+
+boot() {
+	[ -f /proc/mounts ] || /sbin/mount_root
+	[ -f /proc/jffs2_bbc ] && echo "S" > /proc/jffs2_bbc
+
+	mkdir -p /var/run
+	mkdir -p /var/log
+	mkdir -p /var/lock
+	mkdir -p /var/state
+	mkdir -p /var/tmp
+	mkdir -p /tmp/.uci
+	chmod 0700 /tmp/.uci
+	touch /var/log/wtmp
+	touch /var/log/lastlog
+	mkdir -p /tmp/resolv.conf.d
+	touch /tmp/resolv.conf.d/resolv.conf.auto
+	ln -sf /tmp/resolv.conf.d/resolv.conf.auto /tmp/resolv.conf
+	grep -q debugfs /proc/filesystems && /bin/mount -o noatime -t debugfs debugfs /sys/kernel/debug
+	grep -q bpf /proc/filesystems && /bin/mount -o nosuid,nodev,noexec,noatime,mode=0700 -t bpf bpffs /sys/fs/bpf
+	grep -q pstore /proc/filesystems && /bin/mount -o noatime -t pstore pstore /sys/fs/pstore
+
+	# mount all entries in fstab
+	/bin/mount -a &
+
+	# /log directory might be created on preinit
+	# symlink /storage to /log on TRB14X devices
+	[ -d /storage -a ! -h /log ] && {
+		rm -rf /log
+		ln -sf /storage /log
+	}
+
+	# Wifi ---
+	param=$(/sbin/mnf_info "--name")
+	router_name=${param:0:6}
+	if [ $router_name == "RUTX08" ] || [ $router_name == "RUTX09" ]; then
+		rm /etc/modules.d/ath10k
+	fi
+
+	/bin/board_detect
+
+	/sbin/kmodloader
+
+	/bin/config_generate
+	uci_apply_defaults
+
+	[ -f "/etc/config/teltonika" ] && rm /etc/config/teltonika
+
+	# temporary hack until configd exists
+	/sbin/reload_config
+	# leave finished boot script indication
+	touch /var/run/boot-done
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/done

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=95
+boot() {
+	mount_root done
+	rm -f /sysupgrade.tgz && sync
+
+	# process user commands
+	[ -f /etc/rc.local ] && {
+		sh /etc/rc.local
+	}
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/gpio_switch

@@ -0,0 +1,66 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2015 OpenWrt.org
+
+START=94
+STOP=10
+USE_PROCD=1
+
+
+load_gpio_switch()
+{
+	local name
+	local gpio_pin
+	local value
+
+	config_get gpio_pin "$1" gpio_pin
+	config_get name "$1" name
+	config_get value "$1" value 0
+
+	[ -z "$gpio_pin" ] && {
+		echo >&2 "Skipping gpio_switch '$name' due to missing gpio_pin"
+		return 1
+	}
+
+	local gpio_path
+	if [ -n "$(echo "$gpio_pin" | grep -E "^[0-9]+$")" ]; then
+		gpio_path="/sys/class/gpio/gpio${gpio_pin}"
+
+		# export GPIO pin for access
+		[ -d "$gpio_path" ] || {
+			echo "$gpio_pin" >/sys/class/gpio/export
+			# we need to wait a bit until the GPIO appears
+			[ -d "$gpio_path" ] || sleep 1
+		}
+
+		# direction attribute only exists if the kernel supports changing the
+		# direction of a GPIO
+		if [ -e "${gpio_path}/direction" ]; then
+			# set the pin to output with high or low pin value
+			{ [ "$value" = "0" ] && echo "low" || echo "high"; } \
+				>"$gpio_path/direction"
+		else
+			{ [ "$value" = "0" ] && echo "0" || echo "1"; } \
+				>"$gpio_path/value"
+		fi
+	else
+		gpio_path="/sys/class/gpio/${gpio_pin}"
+
+		[ -d "$gpio_path" ] && {
+			{ [ "$value" = "0" ] && echo "0" || echo "1"; } \
+				>"$gpio_path/value"
+		}
+	fi
+}
+
+service_triggers()
+{
+	procd_add_reload_trigger "system"
+}
+
+start_service()
+{
+	[ -e /sys/class/gpio/ ] && {
+		config_load system
+		config_foreach load_gpio_switch gpio_switch
+	}
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/led

@@ -0,0 +1,140 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2008 OpenWrt.org
+
+START=96
+
+load_led() {
+	local name
+	local sysfs
+	local trigger
+	local dev
+	local ports
+	local mode
+	local default
+	local delayon
+	local delayoff
+	local interval
+
+	config_get sysfs $1 sysfs
+	config_get name $1 name "$sysfs"
+	config_get trigger $1 trigger "none"
+	config_get dev $1 dev
+	config_get ports $1 port
+	config_get mode $1 mode
+	config_get_bool default $1 default "0"
+	config_get delayon $1 delayon
+	config_get delayoff $1 delayoff
+	config_get interval $1 interval "50"
+	config_get port_state $1 port_state
+	config_get delay $1 delay "150"
+	config_get message $1 message ""
+	config_get gpio $1 gpio "0"
+	config_get inverted $1 inverted "0"
+
+	if [ "$trigger" = "rssi" ]; then
+		# handled by rssileds userspace process
+		return
+	fi
+
+	[ "$trigger" = "usbdev" ] && {
+		# Backward compatibility: translate to the new trigger
+		trigger="usbport"
+		# Translate port of root hub, e.g. 4-1 -> usb4-port1
+		ports=$(echo "$dev" | sed -n 's/^\([0-9]*\)-\([0-9]*\)$/usb\1-port\2/p')
+		# Translate port of extra hub, e.g. 2-2.4 -> 2-2-port4
+		[ -z "$ports" ] && ports=$(echo "$dev" | sed -n 's/\./-port/p')
+	}
+
+	[ -e /sys/class/leds/${sysfs}/brightness ] && {
+		echo "setting up led ${name}"
+
+		printf "%s %s %d\n" \
+			"$sysfs" \
+			"$(sed -ne 's/^.*\[\(.*\)\].*$/\1/p' /sys/class/leds/${sysfs}/trigger)" \
+			"$(cat /sys/class/leds/${sysfs}/brightness)" \
+				>> /var/run/led.state
+
+		[ "$default" = 0 ] &&
+			echo 0 >/sys/class/leds/${sysfs}/brightness
+
+		echo $trigger > /sys/class/leds/${sysfs}/trigger 2> /dev/null
+		ret="$?"
+
+		[ $default = 1 ] &&
+			cat /sys/class/leds/${sysfs}/max_brightness > /sys/class/leds/${sysfs}/brightness
+
+		[ $ret = 0 ] || {
+			echo >&2 "Skipping trigger '$trigger' for led '$name' due to missing kernel module"
+			return 1
+		}
+		case "$trigger" in
+		"netdev")
+			[ -n "$dev" ] && {
+				echo $dev > /sys/class/leds/${sysfs}/device_name
+				for m in $mode; do
+					[ -e "/sys/class/leds/${sysfs}/$m" ] && \
+						echo 1 > /sys/class/leds/${sysfs}/$m
+				done
+				echo $interval > /sys/class/leds/${sysfs}/interval
+			}
+			;;
+
+		"timer"|"oneshot")
+			[ -n "$delayon" ] && \
+				echo $delayon > /sys/class/leds/${sysfs}/delay_on
+			[ -n "$delayoff" ] && \
+				echo $delayoff > /sys/class/leds/${sysfs}/delay_off
+			;;
+
+		"usbport")
+			local p
+
+			for p in $ports; do
+				echo 1 > /sys/class/leds/${sysfs}/ports/$p
+			done
+			;;
+
+		"port_state")
+			[ -n "$port_state" ] && \
+				echo $port_state > /sys/class/leds/${sysfs}/port_state
+			;;
+
+		"gpio")
+			echo $gpio > /sys/class/leds/${sysfs}/gpio
+			echo $inverted > /sys/class/leds/${sysfs}/inverted
+			;;
+
+		switch[0-9]*)
+			local port_mask speed_mask
+
+			config_get port_mask $1 port_mask
+			[ -n "$port_mask" ] && \
+				echo $port_mask > /sys/class/leds/${sysfs}/port_mask
+			config_get speed_mask $1 speed_mask
+			[ -n "$speed_mask" ] && \
+				echo $speed_mask > /sys/class/leds/${sysfs}/speed_mask
+			[ -n "$mode" ] && \
+				echo "$mode" > /sys/class/leds/${sysfs}/mode
+			;;
+		esac
+	}
+}
+
+start() {
+	[ -e /sys/class/leds/ ] && {
+		[ -s /var/run/led.state ] && {
+			local led trigger brightness
+			while read led trigger brightness; do
+				[ -e "/sys/class/leds/$led/trigger" ] && \
+					echo "$trigger" > "/sys/class/leds/$led/trigger"
+
+				[ -e "/sys/class/leds/$led/brightness" ] && \
+					echo "$brightness" > "/sys/class/leds/$led/brightness"
+			done < /var/run/led.state
+			rm /var/run/led.state
+		}
+
+		config_load system
+		config_foreach load_led led
+	}
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/modem_tracker

@@ -0,0 +1,37 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2021 Teltonika Networks
+# Copyright (C) 2022 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
+
+START=2
+
+USE_PROCD=1
+
+PROG=/bin/board_track
+NAME=board_track
+PIDCOUNT=1
+
+start_service() {
+	. /lib/functions
+	
+	[ "$(board_name)" != "teltonika,rutx" ] && return 0
+	local pid_file="/var/run/${NAME}.${PIDCOUNT}.pid"
+
+	procd_open_instance
+	procd_set_param command "$PROG"
+	procd_set_param file /etc/config/system
+
+	procd_set_param respawn
+
+	procd_set_param stdout 1
+	procd_set_param pidfile $pid_file
+	procd_close_instance
+}
+
+reload_service() {
+	stop
+	start
+}
+
+service_triggers() {
+	procd_add_reload_trigger "system"
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/ntpserver

@@ -0,0 +1,28 @@
+#!/bin/sh /etc/rc.common
+
+# Copyright (C) 2021 Teltonika
+
+START=50
+STOP=51
+USE_PROCD=1
+
+service_triggers()
+{
+	procd_add_reload_trigger "ntpserver"
+}
+
+start_service() {
+	. /lib/functions.sh
+	local enabled
+
+	config_load ntpserver
+	config_get enabled general enabled "0"
+
+	[ "$enabled" -gt 0 ] || return
+
+	logger -t "ntpd" "Starting NTP server"
+	procd_open_instance
+	procd_set_param respawn 0
+	procd_set_param command "ntpd" -ln
+	procd_close_instance
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/powerctl

@@ -0,0 +1,32 @@
+#!/bin/sh /etc/rc.common
+
+START=98
+
+ipq40xx_power_auto() {
+	# change scaling governor as ondemand to enable clock scaling based on system load
+	echo "performance" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+
+	# set scaling min freq as 200 MHz
+	echo "716000" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+
+	# Change sampling rate for frequency scaling decisions to 1s, from 10 ms
+	#echo "1000000" > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+
+	# Change sampling rate for frequency down scaling decision to 10s
+	#echo 10 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_down_factor
+
+	# Change the CPU load threshold above which frequency is up-scaled to
+	# turbo frequency,to 50%
+	#echo 50 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+}
+
+start() {
+	. /lib/functions.sh
+
+	local board=$(board_name)
+	case "$board" in
+	teltonika,rutx | ap-dk01.1-c1 | ap-dk01.1-c2 | ap-dk04.1-c1 | ap-dk04.1-c2 | ap-dk04.1-c3 | \
+	ap-dk04.1-c4   | ap-dk04.1-c5 | ap-dk05.1-c1 | ap-dk06.1-c1 | ap-dk07.1-c1 | ap-dk07.1-c2 | ap-dk07.1-c3)
+		ipq40xx_power_auto ;;
+	esac
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/sysctl

@@ -0,0 +1,46 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+START=11
+
+apply_defaults() {
+	local mem="$(awk '/^MemTotal:/ {print $2}' /proc/meminfo)"
+	local min_free frag_low_thresh frag_high_thresh
+
+	if [ "$mem" -gt 65536 ]; then # 128M
+		min_free=16384
+	elif [ "$mem" -gt 32768 ]; then # 64M
+		#Too high for RUT3 device, lets make 2048
+		#min_free=8192
+		min_free=2048
+	else
+		min_free=1024
+		frag_low_thresh=393216
+		frag_high_thresh=524288
+	fi
+
+	sysctl -qw vm.min_free_kbytes="$min_free"
+
+	[ "$frag_low_thresh" ] && sysctl -qw \
+		net.ipv4.ipfrag_low_thresh="$frag_low_thresh" \
+		net.ipv4.ipfrag_high_thresh="$frag_high_thresh" \
+		net.ipv6.ip6frag_low_thresh="$frag_low_thresh" \
+		net.ipv6.ip6frag_high_thresh="$frag_high_thresh" \
+		net.netfilter.nf_conntrack_frag6_low_thresh="$frag_low_thresh" \
+		net.netfilter.nf_conntrack_frag6_high_thresh="$frag_high_thresh"
+
+	# first set default, then all interfaces to avoid races with appearing interfaces
+	if [ -d /proc/sys/net/ipv6/conf ]; then
+		echo 0 > /proc/sys/net/ipv6/conf/default/accept_ra
+		for iface in /proc/sys/net/ipv6/conf/*/accept_ra; do
+			echo 0 > "$iface"
+		done
+	fi
+}
+
+start() {
+	apply_defaults
+	for CONF in /etc/sysctl.d/*.conf /etc/sysctl.conf; do
+		[ -f "$CONF" ] && sysctl -e -p "$CONF" >&-
+	done
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/sysfixtime

@@ -0,0 +1,34 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2013-2014 OpenWrt.org
+
+START=00
+STOP=90
+
+RTC_DEV=/dev/rtc0
+HWCLOCK=/sbin/hwclock
+
+boot() {
+#	start && exit 0
+
+	local maxtime="$(maxtime)"
+	local curtime="$(date +%s)"
+	[ $curtime -lt $maxtime ] && date -s @$maxtime
+}
+
+start() {
+	boot
+}
+
+stop() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -w -u -f $RTC_DEV && \
+		logger -t sysfixtime "saved '$(date)' to $RTC_DEV"
+}
+
+maxtime() {
+	local file newest
+
+	for file in $( find /etc -type f ) ; do
+		[ -z "$newest" -o "$newest" -ot "$file" ] && newest=$file
+	done
+	[ "$newest" ] && date -r "$newest" +%s
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/system

@@ -0,0 +1,45 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2014 OpenWrt.org
+
+START=10
+USE_PROCD=1
+
+validate_system_section() {
+	uci_load_validate system system "$1" "$2" \
+		'hostname:string:%%NAME%%' \
+		'conloglevel:uinteger' \
+		'buffersize:uinteger' \
+		'timezone:string:UTC' \
+		'zonename:string'
+}
+
+system_config() {
+	[ "$2" = 0 ] || {
+		echo "validation failed"
+		return 1
+	}
+
+	echo "$hostname" > /proc/sys/kernel/hostname
+	[ -z "$conloglevel" -a -z "$buffersize" ] || dmesg ${conloglevel:+-n $conloglevel} ${buffersize:+-s $buffersize}
+	echo "$timezone" > /tmp/TZ
+	[ -n "$zonename" ] && [ -f "/usr/share/zoneinfo/${zonename// /_}" ] \
+		&& ln -sf "/usr/share/zoneinfo/${zonename// /_}" /tmp/localtime \
+		&& rm -f /tmp/TZ
+
+	# apply timezone to kernel
+	hwclock -u --systz
+}
+
+reload_service() {
+	config_load system
+	config_foreach validate_system_section system system_config
+}
+
+service_triggers() {
+	procd_add_reload_trigger "system"
+	procd_add_validation validate_system_section
+}
+
+start_service() {
+	reload_service
+}

6.6/target/linux/ipq40xx.new/base-files/etc/init.d/umount

@@ -0,0 +1,13 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2006 OpenWrt.org
+
+STOP=90
+
+restart() {
+	:
+}
+
+stop() {
+	sync
+	/bin/umount -a -d -r
+}

6.6/target/linux/ipq40xx.new/base-files/etc/uci-defaults/01_mnf-info

@@ -0,0 +1,26 @@
+#!/bin/sh
+
+SECTION="hwinfo"
+CONFIG="hwinfo"
+
+get_hw_info() {
+	param=$(/sbin/mnf_info "--name")
+	[ -n "$param" -a ${#param} == 12 ] && uci set "system"."@system[0]"."device_code"=$param
+
+	hostname=${param:0:6}
+	[ -n "$hostname" -a ${#hostname} == 6 -a -z "$(uci -q get system.@system[0].hostname)" ] && uci set "system"."@system[0]"."hostname"=OpenMPTCProuter
+
+	routername=${param:0:6}
+	[ -n "$routername" -a ${#routername} == 6 -a -z "$(uci -q get system.@system[0].routername)" ] && uci set "system"."@system[0]"."routername"=$routername
+
+	version=$(cat /etc/version)
+	[ -n "$version" ] && uci set "system"."@system[0]"."device_fw_version"=$version
+
+	uci commit "system"
+}
+
+# get device information
+echo "Reading device information"
+get_hw_info
+
+exit 0

6.6/target/linux/ipq40xx.new/base-files/etc/uci-defaults/04_migrate-vlan

@@ -0,0 +1,34 @@
+#!/bin/sh
+. /lib/functions.sh
+
+move_network(){
+	local section=$1
+	local device ports vlan
+
+	config_get ports "$section" ports
+	config_get device "$section" device
+	config_get vlan "$section" vlan
+
+	[ "$vlan" -eq 1 ] && {
+		if list_contains "ports" "0t" && list_contains "ports" "5"; then
+			uci_set network "$section" ports "${ports/0t/0}"
+			uci_set network "$section" vlan "2"
+			uci_remove network "$section" vid
+		fi
+	}
+
+	[ "$vlan" -eq 2 ] && {
+		if list_contains ports "0t"; then
+			echo "Contains"
+			uci_set network "$section" ports "${ports/0t/0}"
+			uci_set network "$section" vlan "1"
+			uci_remove network "$section" vid
+		fi
+	}
+}
+
+config_load network
+config_foreach move_network switch_vlan
+uci_commit network
+
+exit 0

6.6/target/linux/ipq40xx.new/base-files/lib/functions/board.sh

@@ -0,0 +1,54 @@
+
+. /usr/share/libubox/jshn.sh
+
+# when device contains 2 internal modems, this function will return '2' if
+#  selected modem(inc_id) is builtin and primary.
+# And if it's only builtin, then '1'
+is_builtin_modem() {
+	local inc_id="$1"
+	local modem modems id builtin primary
+
+	json_init
+	json_load_file "/etc/board.json"
+
+	json_get_keys modems modems
+	json_select modems
+
+	for modem in $modems; do
+		json_select "$modem"
+		json_get_vars id builtin primary
+
+		[ "$id" = "$inc_id" ] && {
+			[ -n "$builtin" ] && {
+				[ -n "$primary" ] && {
+					echo 2
+					return
+				}
+
+				echo 1
+				return
+			}
+
+			echo 0
+			return
+		}
+
+		json_select ..
+	done
+
+	echo 0
+}
+
+is_dual_modem() {
+	json_init
+	json_load_file "/etc/board.json"
+
+	json_get_keys hwinfo hwinfo
+	json_select hwinfo
+
+	json_get_vars dual_modem
+
+	[ "$dual_modem" = "1" ] && echo 1 || echo 0
+
+	json_select ..
+}

6.6/target/linux/ipq40xx.new/base-files/lib/functions/migrate.sh

@@ -0,0 +1,196 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+CFG_PATH="/etc/config/"
+
+get_section_name() {
+	local ___var="$1"
+	[ "$#" -ge 1 ] && shift
+	local ___type="$1"
+	[ "$#" -ge 1 ] && shift
+	local section cfgtype
+
+	[ -z "$CONFIG_SECTIONS" ] && return 0
+	for section in ${CONFIG_SECTIONS}; do
+		config_get cfgtype "$section" TYPE
+		[ -n "$___type" -a "x$cfgtype" != "x$___type" ] && continue
+		eval export "${___var}=\${section}"
+		return 0
+	done
+}
+
+_set_option() {
+	local option="$1"
+	local value="$2"
+
+	uci_set "$_NEW_CONFIG" "$_NEW_SEC_NAME" "$option" "$value"
+}
+
+_set_list_option() {
+	local option="$1"
+	local value="$2"
+
+	for element in $value; do
+		uci_add_list "$_NEW_CONFIG" "$_NEW_SEC_NAME" "$option" "$element"
+	done
+}
+
+_del_uci_element() {
+	local section="$1"
+	local option="$2"
+
+	uci_remove "$_OLD_CONFIG" "$section" "$option"
+}
+_option_cond_cb() {
+	local value=$3
+
+	json_select $2
+	json_get_var old 1
+	json_get_var new 2
+
+	[ "$old" = "$value" ] && _COND_VALUE="$new"
+
+	json_select ..
+}
+
+_parse_condition(){
+	local value="$1"
+
+	_COND_VALUE=
+	json_for_each_item _option_cond_cb "if" "$value"
+}
+
+_option_rule_cb(){
+	local rule="$1"
+	local option="$2"
+	local value
+
+	[ -n "$rule" ] || return 0
+
+	json_select "$option"
+	json_get_vars new_name "if" default cb type
+
+	if [ -n "$cb" ]; then
+		eval "$cb \"\$option\" \"\$_OLD_SEC_NAME\" \"\$_NEW_SEC_NAME\""
+		[ "$?" -eq 0 ] && {
+			json_select ..
+			return 0
+		}
+
+		value="$_OPTION_VALUE"
+	else
+		config_get value $_OLD_SEC_NAME "$option" "$default"
+	fi
+
+	[ -n "$if" ] && {
+		_parse_condition "$value"
+		value="${_COND_VALUE:-${value:-$default}}"
+	}
+
+	if [ -n "$type" -a "$type" = "list" ]; then
+		_set_list_option "${new_name:-$option}" "$value"
+	else
+		_set_option "${new_name:-$option}" "$value"
+	fi
+
+	json_select ..
+}
+
+_init_section() {
+	local sec_t
+
+	json_get_vars old_name new_name new_type old_type
+	[ -n "$old_name" -o -n "$old_type" ] || return 1
+
+	if [ -z "$old_name" ]; then
+		get_section_name _OLD_SEC_NAME "$old_type"
+	else
+		_OLD_SEC_NAME=$old_name
+	fi
+
+	_NEW_SEC_NAME=$new_name
+	_OLD_SEC_TYPE=$old_type
+	_NEW_SEC_TYPE=${new_type:-$old_type}
+	[ -n "$_NEW_SEC_TYPE" ] || \
+		eval "_NEW_SEC_TYPE=\$CONFIG_${_OLD_SEC_NAME}_TYPE"
+
+	if [ -n "$_NEW_SEC_NAME" ]; then
+		uci set "$_NEW_CONFIG"."$_NEW_SEC_NAME"="$_NEW_SEC_TYPE"
+	else
+		_NEW_SEC_NAME="$(uci -q add "$_NEW_CONFIG" "$_NEW_SEC_TYPE")"
+	fi
+
+	[ -n "$_NEW_SEC_NAME" ] || return 1
+}
+
+_section_rule_cb(){
+	local rule="$1"
+	local section="$2"
+	local value
+
+	[ -n "$rule" ] || return 0
+
+	json_select "$section"
+	json_get_vars cb old_name new_name new_type old_type remove
+	[ -n "$cb" ] && {
+		eval "$cb \"\$old_name\" \"\$new_name\" \"\$old_type\" \"\$new_type\""
+		[ "$?" -eq 0 ] && {
+			json_select ..
+			return 0
+		}
+	}
+
+	_init_section
+	[ $? -ne 0 ] && {
+		logger -t "Migration" "Unable to init section"
+		json_select ..
+
+		return 1
+	}
+
+	json_for_each_item _option_rule_cb options
+	json_select ..
+	[ -n "$remove" ] && {
+		_del_uci_element "$old_name"
+		uci_commit "$_OLD_CONFIG"
+	}
+}
+
+_init_config() {
+	json_select config
+	json_get_vars old_name new_name
+
+	[ -n "$old_name" ] || return 1
+	[ -f "$CFG_PATH$old_name" ] || return 1
+	[ -f "$CFG_PATH$new_name" ] || touch $CFG_PATH$new_name
+
+	config_load "$old_name"
+	_NEW_CONFIG="${new_name:-$old_name}"
+	_OLD_CONFIG="$old_name"
+
+	json_select ..
+}
+
+migrate() {
+	local remove
+	local json_file="$1"
+
+	[ -f "$json_file" ] || return 0
+
+	json_init
+	json_load_file "$json_file"
+	json_select
+	_init_config
+	[ $? -ne 0 ] && {
+		logger -t "Migration" "Unable to load config"
+		return 1
+	}
+
+	json_for_each_item _section_rule_cb sections
+	uci_commit "$_NEW_CONFIG"
+
+	json_get_vars remove
+	[ -n "$remove" ] && rm "$CFG_PATH$_OLD_CONFIG"
+}

6.6/target/linux/ipq40xx.new/base-files/lib/functions/network.sh

@@ -0,0 +1,313 @@
+# 1: destination variable
+# 2: interface
+# 3: path
+# 4: separator
+# 5: limit
+__network_ifstatus() {
+	local __tmp
+
+	[ -z "$__NETWORK_CACHE" ] && {
+		__tmp="$(ubus call network.interface dump 2>&1)"
+		case "$?" in
+			4) : ;;
+			0) export __NETWORK_CACHE="$__tmp" ;;
+			*) echo "$__tmp" >&2 ;;
+		esac
+	}
+
+	__tmp="$(jsonfilter ${4:+-F "$4"} ${5:+-l "$5"} -s "${__NETWORK_CACHE:-{}}" -e "$1=@.interface${2:+[@.interface='$2']}$3")"
+
+	[ -z "$__tmp" ] && \
+		unset "$1" && \
+		return 1
+
+	eval "$__tmp"
+}
+
+# determine first IPv4 address of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_ipaddr() {
+	__network_ifstatus "$1" "$2" "['ipv4-address'][0].address";
+}
+
+# determine first IPv6 address of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_ipaddr6() {
+	__network_ifstatus "$1" "$2" "['ipv6-address'][0].address" || \
+		__network_ifstatus "$1" "$2" "['ipv6-prefix-assignment'][0]['local-address'].address" || \
+		return 1
+}
+
+# determine first IPv4 subnet of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_subnet() {
+	__network_ifstatus "$1" "$2" "['ipv4-address'][0]['address','mask']" "/"
+}
+
+# determine first IPv6 subnet of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_subnet6() {
+	local __nets __addr
+
+	if network_get_subnets6 __nets "$2"; then
+		# Attempt to return first non-fe80::/10, non-fc::/7 range
+		for __addr in $__nets; do
+			case "$__addr" in fe[8ab]?:*|f[cd]??:*)
+				continue
+			esac
+			export "$1=$__addr"
+			return 0
+		done
+
+		# Attempt to return first non-fe80::/10 range
+		for __addr in $__nets; do
+			case "$__addr" in fe[8ab]?:*)
+				continue
+			esac
+			export "$1=$__addr"
+			return 0
+		done
+
+		# Return first item
+		for __addr in $__nets; do
+			export "$1=$__addr"
+			return 0
+		done
+	fi
+
+	unset "$1"
+	return 1
+}
+
+# determine first IPv6 prefix of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_prefix6() {
+	__network_ifstatus "$1" "$2" "['ipv6-prefix'][0]['address','mask']" "/"
+}
+
+# determine all IPv4 addresses of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_ipaddrs() {
+	__network_ifstatus "$1" "$2" "['ipv4-address'][*].address"
+}
+
+# determine all IPv6 addresses of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_ipaddrs6() {
+	local __addr
+	local __list=""
+
+	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*].address"; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}"
+		done
+	fi
+
+	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address"; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}"
+		done
+	fi
+
+	if [ -n "$__list" ]; then
+		export "$1=$__list"
+		return 0
+	fi
+
+	unset "$1"
+	return 1
+}
+
+# determine all IP addresses of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_ipaddrs_all() {
+	local __addr __addr6
+
+	network_get_ipaddrs __addr "$2"
+	network_get_ipaddrs6 __addr6 "$2"
+
+	if [ -n "$__addr" -o -n "$__addr6" ]; then
+		export "$1=${__addr:+$__addr }$__addr6"
+		return 0
+	fi
+
+	unset "$1"
+	return 1
+}
+
+# determine all IPv4 subnets of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_subnets() {
+	__network_ifstatus "$1" "$2" "['ipv4-address'][*]['address','mask']" "/ "
+}
+
+# determine all IPv6 subnets of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_subnets6() {
+	local __addr __mask
+	local __list=""
+
+	if __network_ifstatus "__addr" "$2" "['ipv6-address'][*]['address','mask']" "/ "; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}"
+		done
+	fi
+
+	if __network_ifstatus "__addr" "$2" "['ipv6-prefix-assignment'][*]['local-address'].address" && \
+	   __network_ifstatus "__mask" "$2" "['ipv6-prefix-assignment'][*].mask"; then
+		for __addr in $__addr; do
+			__list="${__list:+$__list }${__addr}/${__mask%% *}"
+			__mask="${__mask#* }"
+		done
+	fi
+
+	if [ -n "$__list" ]; then
+		export "$1=$__list"
+		return 0
+	fi
+
+	unset "$1"
+	return 1
+}
+
+# determine all IPv6 prefixes of given logical interface
+# 1: destination variable
+# 2: interface
+network_get_prefixes6() {
+	__network_ifstatus "$1" "$2" "['ipv6-prefix'][*]['address','mask']" "/ "
+}
+
+# determine IPv4 gateway of given logical interface
+# 1: destination variable
+# 2: interface
+# 3: consider inactive gateway if "true" (optional)
+network_get_gateway() {
+	__network_ifstatus "$1" "$2" ".route[@.target='0.0.0.0' && !@.table].nexthop" "" 1 && \
+		return 0
+
+	[ "$3" = 1 -o "$3" = "true" ] && \
+		__network_ifstatus "$1" "$2" ".inactive.route[@.target='0.0.0.0' && !@.table].nexthop" "" 1
+}
+
+# determine IPv6 gateway of given logical interface
+# 1: destination variable
+# 2: interface
+# 3: consider inactive gateway if "true" (optional)
+network_get_gateway6() {
+	__network_ifstatus "$1" "$2" ".route[@.target='::' && !@.table].nexthop" "" 1 && \
+		return 0
+
+	[ "$3" = 1 -o "$3" = "true" ] && \
+		__network_ifstatus "$1" "$2" ".inactive.route[@.target='::' && !@.table].nexthop" "" 1
+}
+
+# determine the DNS servers of the given logical interface
+# 1: destination variable
+# 2: interface
+# 3: consider inactive servers if "true" (optional)
+network_get_dnsserver() {
+	__network_ifstatus "$1" "$2" "['dns-server'][*]" && return 0
+
+	[ "$3" = 1 -o "$3" = "true" ] && \
+		__network_ifstatus "$1" "$2" ".inactive['dns-server'][*]"
+}
+
+# determine the domains of the given logical interface
+# 1: destination variable
+# 2: interface
+# 3: consider inactive domains if "true" (optional)
+network_get_dnssearch() {
+	__network_ifstatus "$1" "$2" "['dns-search'][*]" && return 0
+
+	[ "$3" = 1 -o "$3" = "true" ] && \
+		__network_ifstatus "$1" "$2" ".inactive['dns-search'][*]"
+}
+
+# 1: destination variable
+# 2: addr
+# 3: inactive
+# 4: limit
+__network_wan()
+{
+	limit=1
+	[ -n "$4" ] && limit="$4"
+	__network_ifstatus "$1" "" \
+		"[@.route[@.target='$2' && !@.table]].interface" "" $limit && \
+			return 0
+
+	[ "$3" = 1 -o "$3" = "true" ] && \
+		__network_ifstatus "$1" "" \
+			"[@.inactive.route[@.target='$2' && !@.table]].interface" "" $limit
+}
+
+# find the logical interface which holds the current IPv4 default route
+# 1: destination variable
+# 2: consider inactive default routes if "true" (optional)
+network_find_wan() { __network_wan "$1" "0.0.0.0" "$2" "$3"; }
+
+# find the logical interface which holds the current IPv6 default route
+# 1: destination variable
+# 2: consider inactive default routes if "true" (optional)
+network_find_wan6() { __network_wan "$1" "::" "$2"; }
+
+# test whether the given logical interface is running
+# 1: interface
+network_is_up()
+{
+	local __up
+	__network_ifstatus "__up" "$1" ".up" && [ "$__up" = 1 ]
+}
+
+# determine the protocol of the given logical interface
+# 1: destination variable
+# 2: interface
+network_get_protocol() { __network_ifstatus "$1" "$2" ".proto"; }
+
+# determine the uptime of the given logical interface
+# 1: destination variable
+# 2: interface
+network_get_uptime() { __network_ifstatus "$1" "$2" ".uptime"; }
+
+# determine the metric of the given logical interface
+# 1: destination variable
+# 2: interface
+network_get_metric() { __network_ifstatus "$1" "$2" ".metric"; }
+
+# determine the layer 3 linux network device of the given logical interface
+# 1: destination variable
+# 2: interface
+network_get_device() { __network_ifstatus "$1" "$2" ".l3_device"; }
+
+# determine the layer 2 linux network device of the given logical interface
+# 1: destination variable
+# 2: interface
+network_get_physdev() { __network_ifstatus "$1" "$2" ".device"; }
+
+# defer netifd actions on the given linux network device
+# 1: device name
+network_defer_device()
+{
+	ubus call network.device set_state \
+		"$(printf '{ "name": "%s", "defer": true }' "$1")" 2>/dev/null
+}
+
+# continue netifd actions on the given linux network device
+# 1: device name
+network_ready_device()
+{
+	ubus call network.device set_state \
+		"$(printf '{ "name": "%s", "defer": false }' "$1")" 2>/dev/null
+}
+
+# flush the internal value cache to force re-reading values from ubus
+network_flush_cache() { unset __NETWORK_CACHE; }

6.6/target/linux/ipq40xx.new/base-files/lib/functions/teltonika-defaults.sh

@@ -0,0 +1,143 @@
+#!/bin/ash
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+ucidef_add_static_modem_info() {
+	#Parameters: model usb_id sim_count other_params
+	local model usb_id count
+	local modem_counter=0
+	local sim_count=1
+
+	model="$1"
+	usb_id="$2"
+
+	[ -n "$3" ] && sim_count="$3"
+
+	json_get_keys count modems
+	[ -n "$count" ] && modem_counter="$(echo "$count" | wc -w)"
+
+	json_select_array "modems"
+		json_add_object
+			json_add_string id "$usb_id"
+			json_add_string num "$((modem_counter + 1))"
+			json_add_boolean builtin 1
+			json_add_int simcount "$sim_count"
+
+			for i in "$@"; do
+				case "$i" in
+					primary)
+						json_add_boolean primary 1
+						;;
+					gps_out)
+						json_add_boolean gps_out 1
+					;;
+				esac
+			done
+
+		json_close_object
+	json_select ..
+}
+
+ucidef_add_serial_capabilities() {
+	json_select_array serial
+		json_add_object
+			[ -n "$1" ] && {
+				json_select_array devices
+				for d in $1; do
+					json_add_string "" $d
+				done
+				json_select ..
+			}
+
+			json_select_array bauds
+			for b in $2; do
+				json_add_string "" $b
+			done
+			json_select ..
+
+			json_select_array data_bits
+			for n in $3; do
+				json_add_string "" $n
+			done
+			json_select ..
+
+			json_select_array flow_control
+			for n in $4; do
+				json_add_string "" $n
+			done
+			json_select ..
+
+			json_select_array stop_bits
+			for n in $5; do
+				json_add_string "" $n
+			done
+			json_select ..
+
+			json_select_array parity_types
+			for n in $6; do
+				json_add_string "" $n
+			done
+			json_select ..
+
+			json_add_string "path" $7
+
+		json_close_object
+	json_select ..
+}
+
+ucidef_add_wlan_bssid_limit() {
+	json_select_object wlan
+		json_add_object "$1"
+			json_add_int bssid_limit "$2"
+		json_close_object
+	json_select ..
+}
+
+ucidef_set_hwinfo() {
+	local args=" $* "
+	local options='
+	dual_sim
+	at_sim
+	wifi
+	dual_band_ssid
+	wps
+	mobile
+	gps
+	usb
+	poe
+	bluetooth
+	ethernet
+	sfp_port
+	ios
+	sfp_switch
+	rs232
+	rs485
+	console
+	dual_modem
+	sd_card
+	sw_rst_on_init
+	dsa
+	hw_nat
+	'
+
+	json_select_object hwinfo
+
+	for opt in $options; do
+		if [[ "$args" =~ " $(echo "$opt" | tr -d '\011\012\015\040') " ]]; then
+			json_add_boolean "$opt" 1
+		else
+			json_add_boolean "$opt" 0
+		fi
+	done
+
+	json_select ..
+}
+
+ucidef_set_release_version() {
+	json_add_string release_version "$1"
+}
+
+ucidef_set_usb_jack() {
+	json_add_string "usb_jack" "$1"
+}

6.6/target/linux/ipq40xx.new/base-files/lib/functions/teltonika-functions.sh

@@ -0,0 +1,68 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+
+is_ios_enabled() {
+	local ios
+	json_load_file "/etc/board.json" &&
+		json_select hwinfo &&
+		json_get_var ios ios && [ "$ios" = "1" ]
+}
+
+# set_tty_options <device_path> <baudrate> <databits> <parity> <stopbits> <flowcontrol> <duplex> <echo>
+set_tty_options() {
+	local PARITY_TMP=""
+	local SBITS_TMP=""
+	local FCTRL_TMP=""
+
+	case "$4" in
+	"odd") PARITY_TMP="parenb parodd -cmspar" ;;
+	"even") PARITY_TMP="parenb -parodd -cmspar" ;;
+	"mark") PARITY_TMP="parenb parodd cmspar";;
+	"space") PARITY_TMP="parenb -parodd cmspar";;
+	*) PARITY_TMP="-parenb -parodd -cmspar" ;;
+	esac
+
+	case "$5" in
+	1) SBITS_TMP="-cstopb" ;;
+	2) SBITS_TMP="cstopb" ;;
+	*) SBITS_TMP="-cstopb" ;;
+	esac
+
+	case "$6" in
+	"none") FCTRL_TMP="-crtscts -ixon -ixoff" ;;
+	"rts/cts") FCTRL_TMP="crtscts -ixon -ixoff" ;;
+	"xon/xoff") FCTRL_TMP="-crtscts ixon ixoff" ;;
+	*) FCTRL_TMP="-crtscts -ixon -ixoff" ;;
+	esac
+
+	case "$7" in
+	0 | 1)
+		echo "$7" >/sys/class/gpio/rs485_rx_en/value
+		;;
+	esac
+
+	if [ "$8" == "1" ]; then
+		FCTRL_TMP="$FCTRL_TMP echo"
+	else
+		FCTRL_TMP="$FCTRL_TMP -echo"
+	fi
+
+	local stty_retries=0
+	while ! stty -F "$1" "$2" cs"$3" $PARITY_TMP "$SBITS_TMP" $FCTRL_TMP; do
+		if [ $stty_retries -lt 5 ]; then
+			stty_retries=$((stty_retries + 1))
+			echo "stty was unable to set all the parameters, retrying in 10 seconds"
+			sleep 10
+		else
+			echo "stty failed, continuing anyway"
+			break
+		fi
+	done
+}
+
+to_lower() {
+	tr '[A-Z]' '[a-z]' <<-EOF
+		$@
+	EOF
+}

6.6/target/linux/ipq40xx.new/base-files/lib/functions/uci-defaults.sh

@@ -0,0 +1,726 @@
+#!/bin/ash
+
+. /lib/functions.sh
+. /usr/share/libubox/jshn.sh
+
+json_select_array() {
+	local _json_no_warning=1
+
+	json_select "$1"
+	[ $? = 0 ] && return
+
+	json_add_array "$1"
+	json_close_array
+
+	json_select "$1"
+}
+
+json_select_object() {
+	local _json_no_warning=1
+
+	json_select "$1"
+	[ $? = 0 ] && return
+
+	json_add_object "$1"
+	json_close_object
+
+	json_select "$1"
+}
+
+ucidef_set_interface() {
+	local network=$1; shift
+
+	[ -z "$network" ] && return
+
+	json_select_object network
+	json_select_object "$network"
+
+	while [ -n "$1" ]; do
+		local opt=$1; shift
+		local val=$1; shift
+
+		[ -n "$opt" -a -n "$val" ] || break
+
+		[ "$opt" = "device" -a "$val" != "${val/ //}" ] && {
+			json_select_array "ports"
+			for e in $val; do json_add_string "" "$e"; done
+			json_close_array
+		} || {
+			json_add_string "$opt" "$val"
+		}
+	done
+
+	if ! json_is_a proto string; then
+		case "$network" in
+			lan) json_add_string proto static ;;
+			wan) json_add_string proto dhcp ;;
+			*) json_add_string proto none ;;
+		esac
+	fi
+
+	json_select ..
+	json_select ..
+}
+
+ucidef_set_interface_default_macaddr() {
+	local network="$1" ifname
+
+	json_select_object 'network'
+		json_select_object "$network"
+		if json_is_a ports array; then
+			json_select_array 'ports'
+			json_get_keys port_id
+			for i in $port_id; do
+				json_get_var port "$i"
+				ifname="${ifname} $port"
+			done
+			json_select ..
+		else
+			json_get_var ifname 'device'
+		fi
+		json_select ..
+	json_select ..
+
+	for i in $ifname; do
+		local macaddr="$2"; shift
+		[ -n "$macaddr" ] || break
+		json_select_object 'network-device'
+			json_select_object "$i"
+				json_add_string 'macaddr' "$macaddr"
+			json_select ..
+		json_select ..
+	done
+}
+
+ucidef_set_board_id() {
+	json_select_object model
+	json_add_string id "$1"
+	json_select ..
+}
+
+ucidef_set_board_platform() {
+	json_select_object model
+	json_add_string platform "$1"
+	json_select ..
+}
+
+ucidef_set_model_name() {
+	json_select_object model
+	json_add_string name "$1"
+	json_select ..
+}
+
+ucidef_set_compat_version() {
+	json_select_object system
+	json_add_string compat_version "${1:-1.0}"
+	json_select ..
+}
+
+ucidef_set_interface_lan() {
+	ucidef_set_interface "lan" device "$1" proto "${2:-static}"
+}
+
+ucidef_set_interface_wan() {
+	ucidef_set_interface "wan" device "$1" proto "${2:-dhcp}"
+}
+
+ucidef_set_interfaces_lan_wan() {
+	local lan_if="$1"
+	local wan_if="$2"
+
+	ucidef_set_interface_lan "$lan_if"
+	ucidef_set_interface_wan "$wan_if"
+}
+
+_ucidef_add_switch_port() {
+	# inherited: $num $device $need_tag $want_untag $role $index $prev_role
+	# inherited: $n_cpu $n_ports $n_vlan $cpu0 $cpu1 $cpu2 $cpu3 $cpu4 $cpu5
+
+	n_ports=$((n_ports + 1))
+
+	json_select_array ports
+		json_add_object
+			json_add_int num "$num"
+			[ -n "$device"     ] && json_add_string  device     "$device"
+			[ -n "$need_tag"   ] && json_add_boolean need_tag   "$need_tag"
+			[ -n "$want_untag" ] && json_add_boolean want_untag "$want_untag"
+			[ -n "$role"       ] && json_add_string  role       "$role"
+			[ -n "$index"      ] && json_add_int     index      "$index"
+		json_close_object
+	json_select ..
+
+	# record pointer to cpu entry for lookup in _ucidef_finish_switch_roles()
+	[ -n "$device" ] && {
+		export "cpu$n_cpu=$n_ports"
+		n_cpu=$((n_cpu + 1))
+	}
+
+	# create/append object to role list
+	[ -n "$role" ] && {
+		json_select_array roles
+
+		if [ "$role" != "$prev_role" ]; then
+			json_add_object
+				json_add_string role "$role"
+				json_add_string ports "$num"
+			json_close_object
+
+			prev_role="$role"
+			n_vlan=$((n_vlan + 1))
+		else
+			json_select_object "$n_vlan"
+				json_get_var port ports
+				json_add_string ports "$port $num"
+			json_select ..
+		fi
+
+		json_select ..
+	}
+}
+
+_ucidef_finish_switch_roles() {
+	# inherited: $name $n_cpu $n_vlan $cpu0 $cpu1 $cpu2 $cpu3 $cpu4 $cpu5
+	local index role roles num device need_tag want_untag port ports
+
+	json_select switch
+		json_select "$name"
+			json_get_keys roles roles
+		json_select ..
+	json_select ..
+
+	for index in $roles; do
+		eval "port=\$cpu$(((index - 1) % n_cpu))"
+
+		json_select switch
+			json_select "$name"
+				json_select ports
+					json_select "$port"
+						json_get_vars num device need_tag want_untag
+					json_select ..
+				json_select ..
+
+				if [ ${need_tag:-0} -eq 1 -o ${want_untag:-0} -ne 1 ]; then
+					num="${num}t"
+					device="${device}.${index}"
+				fi
+
+				json_select roles
+					json_select "$index"
+						json_get_vars role ports
+						json_add_string ports "$ports $num"
+						json_add_string device "$device"
+					json_select ..
+				json_select ..
+			json_select ..
+		json_select ..
+
+		json_select_object network
+			local devices
+
+			json_select_object "$role"
+				# attach previous interfaces (for multi-switch devices)
+				json_get_var devices device
+				if ! list_contains devices "$device"; then
+					devices="${devices:+$devices }$device"
+				fi
+			json_select ..
+		json_select ..
+
+		ucidef_set_interface "$role" device "$devices"
+	done
+}
+
+ucidef_set_ar8xxx_switch_mib() {
+	local name="$1"
+	local type="$2"
+	local interval="$3"
+
+	json_select_object switch
+		json_select_object "$name"
+			json_add_int ar8xxx_mib_type $type
+			json_add_int ar8xxx_mib_poll_interval $interval
+		json_select ..
+	json_select ..
+}
+
+ucidef_add_switch() {	
+	local enabled=1
+	if [ "$1" = "enabled" ]; then
+		shift
+		enabled="$1"
+		shift
+	fi
+
+	local name="$1"; shift
+	local port num role device index need_tag prev_role
+	local cpu0 cpu1 cpu2 cpu3 cpu4 cpu5
+	local n_cpu=0 n_vlan=0 n_ports=0
+
+	json_select_object switch
+		json_select_object "$name"
+			json_add_boolean enable "$enabled"
+			json_add_boolean reset 1
+
+			for port in "$@"; do
+				case "$port" in
+					[0-9]*@*)
+						num="${port%%@*}"
+						device="${port##*@}"
+						need_tag=0
+						want_untag=0
+						[ "${num%t}" != "$num" ] && {
+							num="${num%t}"
+							need_tag=1
+						}
+						[ "${num%u}" != "$num" ] && {
+							num="${num%u}"
+							want_untag=1
+						}
+					;;
+					[0-9]*:*:[0-9]*)
+						num="${port%%:*}"
+						index="${port##*:}"
+						role="${port#[0-9]*:}"; role="${role%:*}"
+					;;
+					[0-9]*:*)
+						num="${port%%:*}"
+						role="${port##*:}"
+					;;
+				esac
+
+				if [ -n "$num" ] && [ -n "$device$role" ]; then
+					_ucidef_add_switch_port
+				fi
+
+				unset num device role index need_tag want_untag
+			done
+		json_select ..
+	json_select ..
+
+	_ucidef_finish_switch_roles
+}
+
+ucidef_add_switch_attr() {
+	local name="$1"
+	local key="$2"
+	local val="$3"
+
+	json_select_object switch
+		json_select_object "$name"
+
+		case "$val" in
+			true|false) [ "$val" != "true" ]; json_add_boolean "$key" $? ;;
+			[0-9]) json_add_int "$key" "$val" ;;
+			*) json_add_string "$key" "$val" ;;
+		esac
+
+		json_select ..
+	json_select ..
+}
+
+ucidef_add_switch_port_attr() {
+	local name="$1"
+	local port="$2"
+	local key="$3"
+	local val="$4"
+	local ports i num
+
+	json_select_object switch
+	json_select_object "$name"
+
+	json_get_keys ports ports
+	json_select_array ports
+
+	for i in $ports; do
+		json_select "$i"
+		json_get_var num num
+
+		if [ -n "$num" ] && [ $num -eq $port ]; then
+			json_select_object attr
+
+			case "$val" in
+				true|false) [ "$val" != "true" ]; json_add_boolean "$key" $? ;;
+				[0-9]) json_add_int "$key" "$val" ;;
+				*) json_add_string "$key" "$val" ;;
+			esac
+
+			json_select ..
+		fi
+
+		json_select ..
+	done
+
+	json_select ..
+	json_select ..
+	json_select ..
+}
+
+ucidef_set_interface_macaddr() {
+	local network="$1"
+	local macaddr="$2"
+
+	ucidef_set_interface "$network" macaddr "$macaddr"
+}
+
+ucidef_add_atm_bridge() {
+	local vpi="$1"
+	local vci="$2"
+	local encaps="$3"
+	local payload="$4"
+	local nameprefix="$5"
+
+	json_select_object dsl
+		json_select_object atmbridge
+			json_add_int vpi "$vpi"
+			json_add_int vci "$vci"
+			json_add_string encaps "$encaps"
+			json_add_string payload "$payload"
+			json_add_string nameprefix "$nameprefix"
+		json_select ..
+	json_select ..
+}
+
+ucidef_add_adsl_modem() {
+	local annex="$1"
+	local firmware="$2"
+
+	json_select_object dsl
+		json_select_object modem
+			json_add_string type "adsl"
+			json_add_string annex "$annex"
+			json_add_string firmware "$firmware"
+		json_select ..
+	json_select ..
+}
+
+ucidef_add_vdsl_modem() {
+	local annex="$1"
+	local tone="$2"
+	local xfer_mode="$3"
+
+	json_select_object dsl
+		json_select_object modem
+			json_add_string type "vdsl"
+			json_add_string annex "$annex"
+			json_add_string tone "$tone"
+			json_add_string xfer_mode "$xfer_mode"
+		json_select ..
+	json_select ..
+}
+
+ucidef_set_led_ataport() {
+	_ucidef_set_led_trigger "$1" "$2" "$3" ata"$4"
+}
+
+_ucidef_set_led_common() {
+	local cfg="led_$1"
+	local name="$2"
+	local sysfs="$3"
+
+	json_select_object led
+
+	json_select_object "$1"
+	json_add_string name "$name"
+	json_add_string sysfs "$sysfs"
+}
+
+ucidef_set_led_default() {
+	local default="$4"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string default "$default"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_gpio() {
+	local gpio="$4"
+	local inverted="$5"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger "$trigger"
+	json_add_string type gpio
+	json_add_int gpio "$gpio"
+	json_add_boolean inverted "$inverted"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_ide() {
+	_ucidef_set_led_trigger "$1" "$2" "$3" disk-activity
+}
+
+ucidef_set_led_netdev() {
+	local dev="$4"
+	local mode="${5:-link tx rx}"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string type netdev
+	json_add_string device "$dev"
+	json_add_string mode "$mode"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_oneshot() {
+	_ucidef_set_led_timer $1 $2 $3 "oneshot" $4 $5
+}
+
+ucidef_set_led_portstate() {
+	local port_state="$4"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger port_state
+	json_add_string type portstate
+	json_add_string port_state "$port_state"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_rssi() {
+	local iface="$4"
+	local minq="$5"
+	local maxq="$6"
+	local offset="${7:-0}"
+	local factor="${8:-1}"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string type rssi
+	json_add_string name "$name"
+	json_add_string iface "$iface"
+	json_add_string minq "$minq"
+	json_add_string maxq "$maxq"
+	json_add_string offset "$offset"
+	json_add_string factor "$factor"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_switch() {
+	local trigger_name="$4"
+	local port_mask="$5"
+	local speed_mask="$6"
+	local mode="$7"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger "$trigger_name"
+	json_add_string type switch
+	json_add_string mode "$mode"
+	json_add_string port_mask "$port_mask"
+	json_add_string speed_mask "$speed_mask"
+	json_select ..
+
+	json_select ..
+}
+
+_ucidef_set_led_timer() {
+	local trigger_name="$4"
+	local delayon="$5"
+	local delayoff="$6"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string type "$trigger_name"
+	json_add_string trigger "$trigger_name"
+	json_add_int delayon "$delayon"
+	json_add_int delayoff "$delayoff"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_timer() {
+	_ucidef_set_led_timer $1 $2 $3 "timer" $4 $5
+}
+
+_ucidef_set_led_trigger() {
+	local trigger_name="$4"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string trigger "$trigger_name"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_usbdev() {
+	local dev="$4"
+
+	_ucidef_set_led_common "$1" "$2" "$3"
+
+	json_add_string type usb
+	json_add_string device "$dev"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_usbhost() {
+	_ucidef_set_led_trigger "$1" "$2" "$3" usb-host
+}
+
+ucidef_set_led_usbport() {
+	local obj="$1"
+	local name="$2"
+	local sysfs="$3"
+	shift
+	shift
+	shift
+
+	_ucidef_set_led_common "$obj" "$name" "$sysfs"
+
+	json_add_string type usbport
+	json_select_array ports
+		for port in "$@"; do
+			json_add_string port "$port"
+		done
+	json_select ..
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_set_led_wlan() {
+	_ucidef_set_led_trigger "$1" "$2" "$3" "$4"
+}
+
+ucidef_set_rssimon() {
+	local dev="$1"
+	local refresh="$2"
+	local threshold="$3"
+
+	json_select_object rssimon
+
+	json_select_object "$dev"
+	[ -n "$refresh" ] && json_add_int refresh "$refresh"
+	[ -n "$threshold" ] && json_add_int threshold "$threshold"
+	json_select ..
+
+	json_select ..
+}
+
+ucidef_add_gpio_switch() {
+	local cfg="$1"
+	local name="$2"
+	local pin="$3"
+	local default="${4:-0}"
+
+	json_select_object gpioswitch
+		json_select_object "$cfg"
+			json_add_string name "$name"
+			json_add_int pin "$pin"
+			json_add_int default "$default"
+		json_select ..
+	json_select ..
+}
+
+ucidef_set_hostname() {
+	local hostname="$1"
+
+	json_select_object system
+		json_add_string hostname "$hostname"
+	json_select ..
+}
+
+ucidef_set_ntpserver() {
+	local server
+
+	json_select_object system
+		json_select_array ntpserver
+			for server in "$@"; do
+				json_add_string "" "$server"
+			done
+		json_select ..
+	json_select ..
+}
+
+ucidef_set_network_options() {
+	json_add_object "network_options"
+	n=$#
+
+	for i in $(seq $((n / 2))); do
+		opt="$1"
+		val="$2"
+
+		if [ "$val" -eq "$val" ] 2>/dev/null; then
+			json_add_int "$opt" "$val"
+		else
+			[ "$val" = "true" ] && val=1 || val=0
+			json_add_boolean "$opt" "$val"
+		fi
+		shift; shift
+	done
+	json_close_object
+}
+
+ucidef_set_poe() {
+	json_add_object poe
+		json_add_int "chip_count" "$1"
+		json_add_int "budget" "$2"
+		json_add_int "poe_ports" "$3"
+		shift 3
+		json_add_array ports
+			while [ $# -gt 0 ]
+			do
+				json_add_object ""
+					json_add_string "name" "$1"
+					json_add_string "class" "$2"
+					json_add_int "budget" "$3"
+				json_close_object
+				shift 3
+			done
+		json_close_array
+		json_add_array poe_chips
+		json_close_array
+	json_close_object
+}
+
+ucidef_set_poe_chip() {
+	json_select_object poe
+		json_select_array poe_chips
+			json_add_object ""
+				for port in "$@"; do
+					case "$port" in
+						0X*)
+							json_add_string address "$port"
+						;;
+						[0-9]:*)
+							json_add_string chan"${port%%:*}" "${port##*:}"
+						;;
+					esac
+				done
+			json_close_object
+		json_select ..
+	json_select ..
+}
+
+board_config_update() {
+	json_init
+	[ -f ${CFG} ] && json_load "$(cat ${CFG})"
+
+	# auto-initialize model id and name if applicable
+	if ! json_is_a model object; then
+		json_select_object model
+			[ -f "/tmp/sysinfo/board_name" ] && \
+				json_add_string id "$(cat /tmp/sysinfo/board_name)"
+			[ -f "/tmp/sysinfo/model" ] && \
+				json_add_string name "$(cat /tmp/sysinfo/model)"
+		json_select ..
+	fi
+}
+
+board_config_flush() {
+	json_dump -i -o ${CFG}
+}

6.6/target/linux/ipq40xx.new/base-files/lib/preinit/82_modem_power

@@ -0,0 +1,23 @@
+set_state() {
+	local label="$1"
+	local disable
+
+	[ -e "/sys/class/gpio/${label}_power/value" ] || return
+
+	config_get disable ${label} disable
+
+	[ "${disable}" -eq 1 ] && \
+		/sbin/mctl -s -m "${label}" -c || \
+		/sbin/mctl -p -m "${label}" -c
+}
+
+do_power_modem() {
+	[ -f /etc/board.json ] || return
+
+	[ -z "$(uci -q get system.modem.disable)" ] && /sbin/mctl -p -a -c || {
+		config_load system
+		config_foreach set_state mctl
+	}
+}
+
+boot_hook_add preinit_main do_power_modem

6.6/target/linux/ipq40xx.new/base-files/lib/upgrade/ipq_failsafe.sh

@@ -0,0 +1,383 @@
+find_mmc_part() {
+    local DEVNAME PARTNAME
+
+    if grep -q "$1" /proc/mtd; then
+        echo "" && return 0
+    fi
+
+    for DEVNAME in /sys/block/mmcblk0/mmcblk*p*; do
+        PARTNAME=$(grep PARTNAME ${DEVNAME}/uevent | cut -f2 -d'=')
+        [ "$PARTNAME" = "$1" ] && echo "/dev/$(basename $DEVNAME)" && return 0
+    done
+}
+
+get_full_section_name() {
+	local img=$1
+	local sec=$2
+
+	dumpimage -l ${img} | grep "^ Image.*(${sec})" | \
+		sed 's,^ Image.*(\(.*\)),\1,'
+}
+
+image_contains() {
+	local img=$1
+	local sec=$2
+	dumpimage -l ${img} | grep -q "^ Image.*(${sec}.*)" || return 1
+}
+
+print_sections() {
+	local img=$1
+
+	dumpimage -l ${img} | awk '/^ Image.*(.*)/ { print gensub(/Image .* \((.*)\)/,"\\1", $0) }'
+}
+
+image_has_mandatory_section() {
+	local img=$1
+	local mandatory_sections=$2
+
+	for sec in ${mandatory_sections}; do
+		image_contains $img ${sec} || {\
+			return 1
+		}
+	done
+}
+
+image_demux() {
+	local img=$1
+
+	for sec in $(print_sections ${img}); do
+		local fullname=$(get_full_section_name ${img} ${sec})
+
+		local position=$(dumpimage -l ${img} | grep "(${fullname})" | awk '{print $2}')
+		dumpimage -i ${img} -o /tmp/${fullname}.bin -T "flat_dt" -p "${position}" ${fullname} > /dev/null || { \
+			echo "Error while extracting \"${sec}\" from ${img}"
+			return 1
+		}
+	done
+	return 0
+}
+
+image_is_FIT() {
+	if ! dumpimage -l $1 > /dev/null 2>&1; then
+		echo "$1 is not a valid FIT image"
+		return 1
+	fi
+	return 0
+}
+
+switch_layout() {
+	local layout=$1
+	local boot_layout=`find / -name boot_layout`
+
+	# Layout switching is only required as the  boot images (up to u-boot)
+	# use 512 user data bytes per code word, whereas Linux uses 516 bytes.
+	# It's only applicable for NAND flash. So let's return if we don't have
+	# one.
+
+	[ -n "$boot_layout" ] || return
+
+	case "${layout}" in
+		boot|1) echo 1 > $boot_layout;;
+		linux|0) echo 0 > $boot_layout;;
+		*) echo "Unknown layout \"${layout}\"";;
+	esac
+}
+
+do_flash_mtd() {
+	local bin=$1
+	local mtdname=$2
+	local append=""
+
+	local mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
+	local pgsz=$(cat /sys/class/mtd/${mtdpart}/writesize)
+	[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 -a "$2" == "rootfs" ] && append="-j $CONF_TAR"
+
+	dd if=/tmp/${bin}.bin bs=${pgsz} conv=sync | mtd $append -e "/dev/${mtdpart}" write - "/dev/${mtdpart}"
+}
+
+do_flash_emmc() {
+	local bin=$1
+	local emmcblock=$2
+
+	dd if=/dev/zero of=${emmcblock}
+	dd if=/tmp/${bin}.bin of=${emmcblock}
+}
+
+do_flash_partition() {
+	local bin=$1
+	local mtdname=$2
+	local emmcblock="$(find_mmc_part "$mtdname")"
+
+	if [ -e "$emmcblock" ]; then
+		do_flash_emmc $bin $emmcblock
+	else
+		do_flash_mtd $bin $mtdname
+	fi
+}
+
+do_flash_bootconfig() {
+	local bin=$1
+	local mtdname=$2
+
+	# Fail safe upgrade
+	if [ -f /proc/boot_info/getbinary_${bin} ]; then
+		cat /proc/boot_info/getbinary_${bin} > /tmp/${bin}.bin
+		do_flash_partition $bin $mtdname
+	fi
+}
+
+do_flash_failsafe_partition() {
+	local bin=$1
+	local mtdname=$2
+	local emmcblock
+	local primaryboot
+
+	# Fail safe upgrade
+	[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
+		default_mtd=$mtdname
+		mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
+		primaryboot=$(cat /proc/boot_info/$default_mtd/primaryboot)
+		if [ $primaryboot -eq 0 ]; then
+			echo 1 > /proc/boot_info/$default_mtd/primaryboot
+		else
+			echo 0 > /proc/boot_info/$default_mtd/primaryboot
+		fi
+	}
+
+	emmcblock="$(find_mmc_part "$mtdname")"
+
+	if [ -e "$emmcblock" ]; then
+		do_flash_emmc $bin $emmcblock
+	else
+		do_flash_mtd $bin $mtdname
+	fi
+
+}
+
+do_flash_ubi() {
+	local bin=$1
+	local mtdname=$2
+	local mtdpart
+	local primaryboot
+
+	mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
+	ubidetach -p /dev/${mtdpart}
+
+	# Fail safe upgrade
+	[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
+		primaryboot=$(cat /proc/boot_info/$mtdname/primaryboot)
+		if [ $primaryboot -eq 0 ]; then
+			echo 1 > /proc/boot_info/$mtdname/primaryboot
+		else
+			echo 0 > /proc/boot_info/$mtdname/primaryboot
+		fi
+
+		mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
+	}
+
+	mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
+	ubiformat /dev/${mtdpart} -y -f /tmp/${bin}.bin
+}
+
+do_flash_tz() {
+	local sec=$1
+	local mtdpart=$(grep "\"0:QSEE\"" /proc/mtd | awk -F: '{print $1}')
+	local emmcblock="$(find_mmc_part "0:QSEE")"
+
+	if [ -n "$mtdpart" -o -e "$emmcblock" ]; then
+		do_flash_failsafe_partition ${sec} "0:QSEE"
+	else
+		do_flash_failsafe_partition ${sec} "0:TZ"
+	fi
+}
+
+do_flash_ddr() {
+	local sec=$1
+	local mtdpart=$(grep "\"0:CDT\"" /proc/mtd | awk -F: '{print $1}')
+	local emmcblock="$(find_mmc_part "0:CDT")"
+
+	if [ -n "$mtdpart" -o -e "$emmcblock" ]; then
+		do_flash_failsafe_partition ${sec} "0:CDT"
+	else
+		do_flash_failsafe_partition ${sec} "0:DDRPARAMS"
+	fi
+}
+
+to_upper () {
+	echo $1 | awk '{print toupper($0)}'
+}
+
+flash_section() {
+	local sec=$1
+
+	local board=$(board_name)
+	case "${sec}" in
+		hlos*) switch_layout linux; do_flash_failsafe_partition ${sec} "0:HLOS";;
+		rootfs*) switch_layout linux; do_flash_failsafe_partition ${sec} "rootfs";;
+		fs*) switch_layout linux; do_flash_failsafe_partition ${sec} "rootfs";;
+		ubi*) switch_layout linux; do_flash_ubi ${sec} "rootfs";;
+		#sbl1*) switch_layout boot; do_flash_partition ${sec} "0:SBL1";;
+		#sbl2*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:SBL2";;
+		#sbl3*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:SBL3";;
+		#mibib*) switch_layout boot; do_flash_partition ${sec} "0:MIBIB";;
+		#dtb-$(to_upper $board)*) switch_layout boot; do_flash_partition ${sec} "0:DTB";;
+		u-boot*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:APPSBL";;
+		#ddr-$(to_upper $board)*) switch_layout boot; do_flash_ddr ${sec};;
+		ddr-${board}-*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:CDT";;
+		#ssd*) switch_layout boot; do_flash_partition ${sec} "0:SSD";;
+		tz*) switch_layout boot; do_flash_tz ${sec};;
+		#rpm*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:RPM";;
+		*) echo "Section ${sec} ignored"; return 1;;
+	esac
+
+	echo "Flashed ${sec}"
+}
+
+erase_emmc_config() {
+	local emmcblock="$(find_mmc_part "rootfs_data")"
+	if [ -e "$emmcblock" ]; then
+		dd if=/dev/zero of=${emmcblock}
+		mkfs.ext4 "$emmcblock"
+	fi
+}
+
+platform_pre_upgrade() {
+	cp /sbin/upgraded /tmp
+	ubus call system nandupgrade "{\"path\": \"$1\" }"
+}
+
+platform_check_image_ipq() {
+	local board=$(board_name)
+
+	local mandatory_nand="ubi"
+	local mandatory_nor_emmc="hlos fs"
+	local mandatory_nor="hlos"
+	local mandatory_section_found=0
+	local optional="sbl2 u-boot ddr-${board} ssd tz rpm"
+	local ignored="mibib bootconfig sbl1"
+
+	image_is_FIT $1 || return 1
+
+	image_has_mandatory_section $1 ${mandatory_nand} && {\
+		mandatory_section_found=1
+	}
+
+	image_has_mandatory_section $1 ${mandatory_nor_emmc} && {\
+		mandatory_section_found=1
+	}
+
+	image_has_mandatory_section $1 ${mandatory_nor} && {\
+		mandatory_section_found=1
+	}
+
+	if [ $mandatory_section_found -eq 0 ]; then
+		echo "Error: mandatory section(s) missing from \"$1\". Abort..."
+		return 1
+	fi
+
+	for sec in ${optional}; do
+		image_contains $1 ${sec} || {\
+			echo "Warning: optional section \"${sec}\" missing from \"$1\". Continue..."
+		}
+	done
+
+	for sec in ${ignored}; do
+		image_contains $1 ${sec} && {\
+			echo "Warning: section \"${sec}\" will be ignored from \"$1\". Continue..."
+		}
+	done
+
+	image_demux $1 || {\
+		echo "Error: \"$1\" couldn't be extracted. Abort..."
+		return 1
+	}
+	
+	[ -f /tmp/hlos_version ] && rm -f /tmp/*_version
+	dumpimage -c $1 2>/dev/null
+	return $?
+}
+
+platform_version_upgrade() {
+	local version_files="appsbl_version sbl_version tz_version hlos_version rpm_version"
+	local sys="/sys/devices/system/qfprom/qfprom0/"
+	local tmp="/tmp/"
+
+	for file in $version_files; do
+		[ -f "${tmp}${file}" ] && {
+			echo "Updating "${sys}${file}" with `cat "${tmp}${file}"`"
+			echo `cat "${tmp}${file}"` > "${sys}${file}"
+			rm -f "${tmp}${file}"
+		}
+	done
+}
+
+
+# The U-Boot loader of the OpenMesh devices requires image sizes and
+# checksums to be provided in the U-Boot environment.
+# The OpenMesh devices come with 2 main partitions - while one is active
+# sysupgrade will flash the other. The boot order is changed to boot the
+# newly flashed partition. If the new partition can't be booted due to
+# upgrade failures the previously used partition is loaded.
+
+platform_do_upgrade_ipq() {
+	local board=$(board_name)
+
+	# verify some things exist before erasing
+	if [ ! -e $1 ]; then
+		echo "Error: Can't find $1 after switching to ramfs, aborting upgrade!"
+		reboot
+	fi
+
+	for sec in $(print_sections $1); do
+		if [ ! -e /tmp/${sec}.bin ]; then
+			echo "Error: Cant' find ${sec} after switching to ramfs, aborting upgrade!"
+			reboot
+		fi
+	done
+
+	case "$board" in
+	teltonika,rutx)
+		for sec in $(print_sections $1); do
+			flash_section ${sec}
+		done
+
+		switch_layout linux
+		# update bootconfig to register that fw upgrade has been done
+		do_flash_bootconfig bootconfig "0:BOOTCONFIG"
+		do_flash_bootconfig bootconfig1 "0:BOOTCONFIG1"
+		platform_version_upgrade
+
+		erase_emmc_config
+		return 0;
+		;;
+	esac
+
+	echo "Upgrade failed!"
+	return 1;
+}
+
+platform_copy_config_ipq() {
+	local emmcblock="$(find_mmc_part "rootfs_data")"
+	mkdir -p /tmp/overlay
+
+	if [ -e "$emmcblock" ]; then
+		mount -t ext4 "$emmcblock" /tmp/overlay
+		cp /tmp/sysupgrade.tgz /tmp/overlay/
+		sync
+		umount /tmp/overlay
+	else
+		local mtdname=rootfs
+		local mtdpart
+
+		[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
+			mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
+		}
+
+		mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
+		ubiattach -p /dev/${mtdpart}
+		mount -t ubifs ubi0:rootfs_data /tmp/overlay
+		cp /tmp/sysupgrade.tgz /tmp/overlay/
+		sync
+		umount /tmp/overlay
+	fi
+}

6.6/target/linux/ipq40xx.new/base-files/lib/upgrade/platform.sh

@@ -0,0 +1,222 @@
+PART_NAME=firmware
+REQUIRE_IMAGE_METADATA=1
+
+RAMFS_COPY_BIN='fw_printenv fw_setenv'
+RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
+
+platform_check_image() {
+	case "$(board_name)" in
+	asus,rt-ac42u |\
+	asus,rt-ac58u)
+		local ubidev=$(nand_find_ubi $CI_UBIPART)
+		local asus_root=$(nand_find_volume $ubidev jffs2)
+
+		[ -n "$asus_root" ] || return 0
+
+		cat << EOF
+jffs2 partition is still present.
+There's probably no space left
+to install the filesystem.
+
+You need to delete the jffs2 partition first:
+# ubirmvol /dev/ubi0 --name=jffs2
+
+Once this is done. Retry.
+EOF
+		return 1
+		;;
+	teltonika,rutx)
+		platform_check_image_ipq "$1"
+		;;
+	zte,mf286d)
+		CI_UBIPART="rootfs"
+		local mtdnum="$( find_mtd_index $CI_UBIPART )"
+		[ ! "$mtdnum" ] && return 1
+		ubiattach -m "$mtdnum" || true
+		local ubidev="$( nand_find_ubi $CI_UBIPART )"
+		local ubi_rootfs=$(nand_find_volume $ubidev ubi_rootfs)
+		local ubi_rootfs_data=$(nand_find_volume $ubidev ubi_rootfs_data)
+
+		[ -n "$ubi_rootfs" ] || [ -n "$ubi_rootfs_data" ] || return 0
+
+		cat << EOF
+ubi_rootfs partition is still present.
+
+You need to delete the stock partition first:
+# ubirmvol /dev/ubi0 -N ubi_rootfs
+Please also delete ubi_rootfs_data, if exist:
+# ubirmvol /dev/ubi0 -N ubi_rootfs_data
+
+Once this is done. Retry.
+EOF
+		return 1
+		;;
+	esac
+	return 0;
+}
+
+askey_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+
+	nand_do_upgrade "$1"
+}
+
+zyxel_do_upgrade() {
+	local tar_file="$1"
+
+	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+
+	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
+
+	if [ -n "$UPGRADE_BACKUP" ]; then
+		tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
+	else
+		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
+	fi
+}
+
+platform_do_upgrade_mikrotik_nand() {
+	local fw_mtd=$(find_mtd_part kernel)
+	fw_mtd="${fw_mtd/block/}"
+	[ -n "$fw_mtd" ] || return
+
+	local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
+	board_dir=${board_dir%/}
+	[ -n "$board_dir" ] || return
+
+	local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
+	[ -n "$kernel_len" ] || return
+
+	tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
+
+	CI_KERNPART="none"
+	nand_do_upgrade "$1"
+}
+
+platform_do_upgrade() {
+	case "$(board_name)" in
+	8dev,jalapeno |\
+	aruba,ap-303 |\
+	aruba,ap-303h |\
+	aruba,ap-365 |\
+	avm,fritzbox-7530 |\
+	avm,fritzrepeater-1200 |\
+	avm,fritzrepeater-3000 |\
+	buffalo,wtr-m2133hp |\
+	cilab,meshpoint-one |\
+	edgecore,ecw5211 |\
+	edgecore,oap100 |\
+	engenius,eap2200 |\
+	glinet,gl-ap1300 |\
+	luma,wrtq-329acn |\
+	mobipromo,cm520-79f |\
+	netgear,wac510 |\
+	p2w,r619ac-64m |\
+	p2w,r619ac-128m |\
+	qxwlan,e2600ac-c2)
+		nand_do_upgrade "$1"
+		;;
+	glinet,gl-b2200)
+		CI_KERNPART="0:HLOS"
+		CI_ROOTPART="rootfs"
+		CI_DATAPART="rootfs_data"
+		emmc_do_upgrade "$1"
+		;;
+	alfa-network,ap120c-ac)
+		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
+		if [ "$part" = "rootfs1" ]; then
+			fw_setenv active 2 || exit 1
+			CI_UBIPART="rootfs2"
+		else
+			fw_setenv active 1 || exit 1
+			CI_UBIPART="rootfs1"
+		fi
+		nand_do_upgrade "$1"
+		;;
+	asus,map-ac2200)
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	asus,rt-ac42u |\
+	asus,rt-ac58u)
+		CI_KERNPART="linux"
+		nand_do_upgrade "$1"
+		;;
+	cellc,rtl30vw)
+		CI_UBIPART="ubifs"
+		askey_do_upgrade "$1"
+		;;
+	compex,wpj419)
+		nand_do_upgrade "$1"
+		;;
+	linksys,ea6350v3 |\
+	linksys,ea8300 |\
+	linksys,mr8300)
+		platform_do_upgrade_linksys "$1"
+		;;
+	meraki,mr33)
+		CI_KERNPART="part.safe"
+		nand_do_upgrade "$1"
+		;;
+	mikrotik,cap-ac|\
+	mikrotik,hap-ac2|\
+	mikrotik,lhgg-60ad|\
+	mikrotik,sxtsq-5-ac)
+		[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
+		default_do_upgrade "$1"
+		;;
+	mikrotik,hap-ac3)
+		platform_do_upgrade_mikrotik_nand "$1"
+		;;
+	netgear,rbr50 |\
+	netgear,rbs50 |\
+	netgear,srr60 |\
+	netgear,srs60)
+		platform_do_upgrade_netgear_orbi_upgrade "$1"
+		;;
+	openmesh,a42 |\
+	openmesh,a62 |\
+	plasmacloud,pa1200 |\
+	plasmacloud,pa2200)
+		PART_NAME="inactive"
+		platform_do_upgrade_dualboot_datachk "$1"
+		;;
+	teltonika,rutx12 |\
+	teltonika,rutx)
+		platform_do_upgrade_ipq "$1"
+		;;
+	teltonika,rutx10 |\
+	teltonika,rutx50 |\
+	zte,mf18a |\
+	zte,mf286d |\
+	zte,mf287plus |\
+	zte,mf289f)
+		CI_UBIPART="rootfs"
+		nand_do_upgrade "$1"
+		;;
+	zyxel,nbg6617)
+		zyxel_do_upgrade "$1"
+		;;
+	*)
+		default_do_upgrade "$1"
+		;;
+	esac
+}
+
+platform_copy_config() {
+	case "$(board_name)" in
+	glinet,gl-b2200)
+		emmc_copy_config
+		;;
+	teltonika,rutx)
+		platform_copy_config_ipq
+		;;
+	esac
+	return 0;
+}

6.6/target/linux/ipq40xx.new/base-files/lib/upgrade/stage2

@@ -0,0 +1,147 @@
+#!/bin/sh
+
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+export IMAGE="$1"
+COMMAND="$2"
+
+export INTERACTIVE=0
+export VERBOSE=1
+export CONFFILES=/tmp/sysupgrade.conffiles
+
+RAMFS_COPY_BIN=		# extra programs for temporary ramfs root
+RAMFS_COPY_DATA=	# extra data files
+
+include /lib/upgrade
+
+
+supivot() { # <new_root> <old_root>
+	/bin/mount | grep "on $1 type" 2>&- 1>&- || /bin/mount -o bind $1 $1
+	mkdir -p $1$2 $1/proc $1/sys $1/dev $1/tmp $1/overlay && \
+	/bin/mount -o noatime,move /proc $1/proc && \
+	pivot_root $1 $1$2 || {
+		/bin/umount -l $1 $1
+		return 1
+	}
+
+	/bin/mount -o noatime,move $2/sys /sys
+	/bin/mount -o noatime,move $2/dev /dev
+	/bin/mount -o noatime,move $2/tmp /tmp
+	/bin/mount -o noatime,move $2/overlay /overlay 2>&-
+	return 0
+}
+
+switch_to_ramfs() {
+	for binary in \
+		/bin/busybox /bin/ash /bin/sh /bin/mount /bin/umount	\
+		pivot_root mount_root reboot sync kill sleep		\
+		md5sum hexdump cat zcat bzcat dd tar			\
+		ls basename find cp mv rm mkdir rmdir mknod touch chmod \
+		'[' printf wc grep awk sed cut				\
+		mtd partx losetup mkfs.ext4 nandwrite flash_erase	\
+		ubiupdatevol ubiattach ubiblock ubiformat		\
+		ubidetach ubirsvol ubirmvol ubimkvol			\
+		snapshot snapshot_tool date jshn dtbtool dtc mkbootimg	\
+		ubinize-image.sh sysupgrade-tar.sh which ubinize mktemp	\
+		dumpimage ledman fwtool \
+		$RAMFS_COPY_BIN
+	do
+		local file="$(command -v "$binary" 2>/dev/null)"
+		[ -n "$file" ] && install_bin "$file"
+	done
+	install_file /etc/resolv.conf \
+		/lib/*.sh \
+		/lib/functions/*.sh \
+		/lib/upgrade/*.sh \
+		/lib/upgrade/do_stage2 \
+		/usr/share/libubox/jshn.sh \
+		/etc/board.json \
+		$RAMFS_COPY_DATA
+
+	[ -L "/lib64" ] && ln -s /lib $RAM_ROOT/lib64
+
+	supivot $RAM_ROOT /mnt || {
+		v "Failed to switch over to ramfs. Please reboot."
+		exit 1
+	}
+
+	/bin/mount -o remount,ro /mnt
+	/bin/umount -l /mnt
+
+	grep /overlay /proc/mounts > /dev/null && {
+		/bin/mount -o noatime,remount,ro /overlay
+		/bin/umount -l /overlay
+	}
+}
+
+kill_remaining() { # [ <signal> [ <loop> ] ]
+	local loop_limit=10
+
+	local sig="${1:-TERM}"
+	local loop="${2:-0}"
+	local run=true
+	local stat
+	local proc_ppid=$(cut -d' ' -f4  /proc/$$/stat)
+
+	vn "Sending $sig to remaining processes ..."
+
+	while $run; do
+		run=false
+		for stat in /proc/[0-9]*/stat; do
+			[ -f "$stat" ] || continue
+
+			local pid name state ppid rest
+			read pid name state ppid rest < $stat
+			name="${name#(}"; name="${name%)}"
+
+			# Skip PID1, our parent, ourself and our children
+			[ $pid -ne 1 -a $pid -ne $proc_ppid -a $pid -ne $$ -a $ppid -ne $$ ] || continue
+
+			local cmdline
+			read cmdline < /proc/$pid/cmdline
+
+			# Skip kernel threads
+			[ -n "$cmdline" ] || continue
+
+			_vn " $name"
+			kill -$sig $pid 2>/dev/null
+
+			[ $loop -eq 1 ] && run=true
+		done
+
+		let loop_limit--
+		[ $loop_limit -eq 0 ] && {
+			_v
+			v "Failed to kill all processes."
+			exit 1
+		}
+	done
+	_v
+}
+
+[ -n "$(pgrep telnetd)" ] && {
+	killall -9 telnetd
+}
+
+[ -n "$(pgrep dropbear)" ] && {
+	killall -9 dropbear
+}
+
+killall -9 ash
+
+kill_remaining TERM
+sleep 3
+kill_remaining KILL 1
+
+sleep 1
+
+echo 3 > /proc/sys/vm/drop_caches
+
+if [ -n "$(rootfs_type)" ]; then
+	v "Switching to ramdisk..."
+	switch_to_ramfs
+fi
+
+# Exec new shell from ramfs
+exec /bin/busybox ash -c "$COMMAND"

6.6/target/linux/ipq40xx.new/base-files/sbin/mctl

@@ -0,0 +1,120 @@
+#!/bin/sh
+
+. /usr/share/libubox/jshn.sh
+
+PS_ON=1
+PS_OFF=2
+
+MPS=0
+MLBL="modem"
+
+modem_reset() {
+	local label="$1"
+
+	[ -e "/sys/class/gpio/${label}_reset/value" ] || return
+
+	echo 1 > "/sys/class/gpio/${label}_reset/value"
+	sleep 1
+	echo 0 > "/sys/class/gpio/${label}_reset/value"
+}
+
+modem_off() {
+	local label="$1"
+
+	[ -e "/sys/class/gpio/${label}_reset/value" ] || return
+
+	echo 1 > "/sys/class/gpio/${label}_reset/value"
+}
+
+modem_power() {
+	local label="$1"
+
+	[ -e "/sys/class/gpio/${label}_power/value" ] || return
+
+	# simulate power press
+	echo 1 > "/sys/class/gpio/${label}_power/value"
+	sleep 1
+	echo 0 > "/sys/class/gpio/${label}_power/value"
+}
+
+modem_list() {
+	local list="modem"
+	local label
+
+	[ "$(modem_fetch_primary)" -eq 0 ] && {
+		echo "${list}"
+		return
+	}
+
+	for m in /sys/class/gpio/modem*_power; do
+	        label="$(basename $m | awk -F_ '{print $1}')"
+	        [ "${label}" != "modem" ] && list="${list},${label}"
+	done
+
+	echo "${list}"
+}
+
+modem_fetch_primary() {
+	local modem modems primary
+
+	json_init
+	json_load_file "/etc/board.json"
+
+	json_get_keys modems modems
+	json_select modems
+
+	for modem in $modems; do
+		json_select "$modem"
+		json_get_vars primary
+
+		[ -n "$primary" ] && {
+			echo 1
+			return
+		}
+
+		json_select ..
+	done
+	echo 0
+}
+
+modem_is_available() {
+	local label="$1"
+	[ -e "/sys/class/gpio/${label}_power/value" ]
+}
+
+usage() {
+	cat <<EOF
+Usage $0 <option>
+Control modem power state.
+
+Options:
+ -p, --power-on                power on modem
+ -s, --shutdown                shutdown modem
+ -r, --reboot                  reboot modem
+ -m, --modem <label>           use specified modem instead of default one
+
+Available modem labels:
+ $(modem_list)
+EOF
+	exit 1
+}
+
+while [ -n "$1" ]; do
+	case "$1" in
+	-p | --power-on) MPS="${PS_ON}";;
+	-s | --shutdown) MPS="${PS_OFF}";;
+	-r | --reboot) MPS="${PS_ON}";;
+	-m | --modem) MLBL="$2"; shift;;
+	-*) echo "Invalid option: $1"; usage;;
+	*) break;;
+	esac
+	shift
+done
+
+[ "${MPS}" -eq 0 ] && usage
+modem_is_available "${MLBL}" || usage
+
+case "${MPS}" in
+"${PS_ON}") modem_reset "${MLBL}"; sleep 1; modem_power "${MLBL}";;
+"${PS_OFF}") modem_off "${MLBL}";;
+esac

6.6/target/linux/ipq40xx.new/base-files/sbin/mnf_info

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+while [[ $# -gt 0 ]]; do
+    case $1 in
+	-n|--name)
+	    echo $(dd if=/dev/mtd13 bs=1 count=12 skip=16 2>/dev/null)
+	    shift
+	    ;;
+    esac
+done

6.6/target/linux/ipq40xx.new/config-6.1

@@ -0,0 +1,540 @@
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_APQ_GCC_8084 is not set
+# CONFIG_APQ_MMCC_8084 is not set
+CONFIG_ARCH_32BIT_OFF_T=y
+CONFIG_ARCH_FORCE_MAX_ORDER=11
+CONFIG_ARCH_HIBERNATION_POSSIBLE=y
+CONFIG_ARCH_IPQ40XX=y
+CONFIG_ARCH_KEEP_MEMBLOCK=y
+# CONFIG_ARCH_MDM9615 is not set
+CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
+# CONFIG_ARCH_MOXART is not set
+# CONFIG_ARCH_MSM8909 is not set
+# CONFIG_ARCH_MSM8916 is not set
+# CONFIG_ARCH_MSM8960 is not set
+# CONFIG_ARCH_MSM8974 is not set
+# CONFIG_ARCH_MSM8X60 is not set
+CONFIG_ARCH_MULTIPLATFORM=y
+CONFIG_ARCH_MULTI_V4=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+CONFIG_ARCH_MULTI_V6_V7=y
+CONFIG_ARCH_MULTI_V7=y
+CONFIG_ARCH_NR_GPIO=0
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
+CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_SELECT_MEMORY_MODEL=y
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_ARM=y
+CONFIG_ARM_AMBA=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ARCH_TIMER=y
+CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
+# CONFIG_ARM_ATAG_DTB_COMPAT is not set
+CONFIG_ARM_CPUIDLE=y
+# CONFIG_ARM_CPU_TOPOLOGY is not set
+CONFIG_ARM_CRYPTO=y
+CONFIG_ARM_GIC=y
+CONFIG_ARM_HAS_SG_CHAIN=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+CONFIG_ARM_L1_CACHE_SHIFT_6=y
+CONFIG_ARM_PATCH_IDIV=y
+CONFIG_ARM_PATCH_PHYS_VIRT=y
+# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
+# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set
+# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set
+# CONFIG_ARM_SMMU is not set
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_UNWIND=y
+CONFIG_ARM_VIRT_EXT=y
+CONFIG_AT803X_PHY=y
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_BCH=y
+CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_MQ_PCI=y
+CONFIG_BOUNCE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_CLKSRC_QCOM=y
+CONFIG_CLONE_BACKWARDS=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_COMMON_CLK=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_COMPAT_32BIT_TIME=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPUFREQ_DT_PLATDEV=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_GOV_ATTR_SET=y
+CONFIG_CPU_FREQ_GOV_COMMON=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
+CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_PM=y
+CONFIG_CPU_RMAP=y
+CONFIG_CPU_SPECTRE=y
+CONFIG_CPU_THERMAL=y
+CONFIG_CPU_THUMB_CAPABLE=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_V7=y
+CONFIG_CRC16=y
+# CONFIG_CRC32_SARWATE is not set
+CONFIG_CRC32_SLICEBY8=y
+CONFIG_CRC8=y
+CONFIG_CRYPTO_AES_ARM=y
+CONFIG_CRYPTO_AES_ARM_BS=y
+CONFIG_CRYPTO_BLAKE2S_ARM=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CRYPTD=y
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_DEV_QCE=y
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set
+# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
+CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
+CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
+CONFIG_CRYPTO_DEV_QCOM_RNG=y
+CONFIG_CRYPTO_DRBG=y
+CONFIG_CRYPTO_DRBG_HMAC=y
+CONFIG_CRYPTO_DRBG_MENU=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_HASH_INFO=y
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HW=y
+CONFIG_CRYPTO_JITTERENTROPY=y
+CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
+CONFIG_CRYPTO_LIB_DES=y
+CONFIG_CRYPTO_LIB_SHA256=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_RNG_DEFAULT=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_SIMD=y
+CONFIG_CRYPTO_XTS=y
+CONFIG_CRYPTO_ZSTD=y
+CONFIG_DCACHE_WORD_ACCESS=y
+CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
+CONFIG_DEBUG_MISC=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_ENGINE=y
+CONFIG_DMA_OF=y
+CONFIG_DMA_OPS=y
+CONFIG_DMA_REMAP=y
+CONFIG_DMA_SHARED_BUFFER=y
+CONFIG_DMA_VIRTUAL_CHANNELS=y
+CONFIG_DTC=y
+CONFIG_DT_IDLE_STATES=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_EDAC_ATOMIC_SCRUB=y
+CONFIG_EDAC_SUPPORT=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EXTCON=y
+CONFIG_FIXED_PHY=y
+CONFIG_FIX_EARLYCON_MEM=y
+CONFIG_FWNODE_MDIO=y
+CONFIG_FW_LOADER_PAGED_BUF=y
+CONFIG_GENERIC_ALLOCATOR=y
+CONFIG_GENERIC_BUG=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
+CONFIG_GENERIC_CPU_AUTOPROBE=y
+CONFIG_GENERIC_CPU_VULNERABILITIES=y
+CONFIG_GENERIC_EARLY_IOREMAP=y
+CONFIG_GENERIC_GETTIMEOFDAY=y
+CONFIG_GENERIC_IDLE_POLL_SETUP=y
+CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
+CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
+CONFIG_GENERIC_IRQ_SHOW=y
+CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
+CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
+CONFIG_GENERIC_MSI_IRQ=y
+CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
+CONFIG_GENERIC_PCI_IOMAP=y
+CONFIG_GENERIC_PHY=y
+CONFIG_GENERIC_PINCONF=y
+CONFIG_GENERIC_PINCTRL_GROUPS=y
+CONFIG_GENERIC_PINMUX_FUNCTIONS=y
+CONFIG_GENERIC_SCHED_CLOCK=y
+CONFIG_GENERIC_SMP_IDLE_THREAD=y
+CONFIG_GENERIC_STRNCPY_FROM_USER=y
+CONFIG_GENERIC_STRNLEN_USER=y
+CONFIG_GENERIC_TIME_VSYSCALL=y
+CONFIG_GENERIC_VDSO_32=y
+CONFIG_GPIOLIB_IRQCHIP=y
+CONFIG_GPIO_74X164=y
+CONFIG_GPIO_CDEV=y
+CONFIG_GPIO_WATCHDOG=y
+CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y
+CONFIG_GRO_CELLS=y
+CONFIG_HANDLE_DOMAIN_IRQ=y
+CONFIG_HARDEN_BRANCH_PREDICTOR=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT_MAP=y
+CONFIG_HAVE_SMP=y
+CONFIG_HIGHMEM=y
+# CONFIG_HIGHPTE is not set
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_OPTEE=y
+CONFIG_HZ_FIXED=0
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+# CONFIG_I2C_QCOM_CCI is not set
+CONFIG_I2C_QUP=y
+CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_IOMMU_DEBUGFS is not set
+# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
+# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_IO_URING=y
+# CONFIG_IPQ_APSS_PLL is not set
+CONFIG_IPQ_GCC_4019=y
+# CONFIG_IPQ_GCC_6018 is not set
+# CONFIG_IPQ_GCC_806X is not set
+# CONFIG_IPQ_GCC_8074 is not set
+# CONFIG_IPQ_LCC_806X is not set
+CONFIG_IRQCHIP=y
+CONFIG_IRQ_DOMAIN=y
+CONFIG_IRQ_DOMAIN_HIERARCHY=y
+CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
+CONFIG_IRQ_FORCED_THREADING=y
+CONFIG_IRQ_WORK=y
+CONFIG_KMAP_LOCAL=y
+CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y
+# CONFIG_KPSS_XCC is not set
+# CONFIG_KRAITCC is not set
+CONFIG_LEDS_LP5523=y
+CONFIG_LEDS_LP5562=y
+CONFIG_LEDS_LP55XX_COMMON=y
+CONFIG_LEDS_TLC591XX=y
+CONFIG_LIBFDT=y
+CONFIG_LOCK_DEBUGGING_SUPPORT=y
+CONFIG_LOCK_SPIN_ON_OWNER=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_MDIO_BUS=y
+CONFIG_MDIO_DEVICE=y
+CONFIG_MDIO_DEVRES=y
+CONFIG_MDIO_GPIO=y
+CONFIG_MDIO_IPQ4019=y
+# CONFIG_MDM_GCC_9615 is not set
+# CONFIG_MDM_LCC_9615 is not set
+CONFIG_MEMFD_CREATE=y
+# CONFIG_MFD_HI6421_SPMI is not set
+# CONFIG_MFD_QCOM_RPM is not set
+# CONFIG_MFD_SPMI_PMIC is not set
+CONFIG_MFD_SYSCON=y
+CONFIG_MIGHT_HAVE_CACHE_L2X0=y
+CONFIG_MIGRATION=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_CQHCI=y
+# CONFIG_MSM_GCC_8909 is not set
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_IO_ACCESSORS=y
+CONFIG_MMC_SDHCI_MSM=y
+# CONFIG_MMC_SDHCI_PCI is not set
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MODULES_USE_ELF_REL=y
+# CONFIG_MSM_GCC_8660 is not set
+# CONFIG_MSM_GCC_8916 is not set
+# CONFIG_MSM_GCC_8939 is not set
+# CONFIG_MSM_GCC_8960 is not set
+# CONFIG_MSM_GCC_8974 is not set
+# CONFIG_MSM_GCC_8976 is not set
+# CONFIG_MSM_GCC_8994 is not set
+# CONFIG_MSM_GCC_8996 is not set
+# CONFIG_MSM_GCC_8998 is not set
+# CONFIG_MSM_GPUCC_8998 is not set
+# CONFIG_MSM_LCC_8960 is not set
+# CONFIG_MSM_MMCC_8960 is not set
+# CONFIG_MSM_MMCC_8974 is not set
+# CONFIG_MSM_MMCC_8996 is not set
+# CONFIG_MSM_MMCC_8998 is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND_CORE=y
+CONFIG_MTD_NAND_ECC=y
+CONFIG_MTD_NAND_ECC_SW_BCH=y
+CONFIG_MTD_NAND_ECC_SW_HAMMING=y
+CONFIG_MTD_NAND_QCOM=y
+# CONFIG_MTD_QCOMSMEM_PARTS is not set
+CONFIG_MTD_RAW_NAND=y
+CONFIG_MTD_SPI_NAND=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
+CONFIG_MTD_SPLIT_FIT_FW=y
+CONFIG_MTD_SPLIT_WRGG_FW=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_BEB_LIMIT=20
+CONFIG_MTD_UBI_BLOCK=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MUTEX_SPIN_ON_OWNER=y
+CONFIG_NEED_DMA_MAP_STATE=y
+CONFIG_NEON=y
+CONFIG_NET_DEVLINK=y
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_QCA8K_IPQ4019=y
+CONFIG_NET_DSA_TAG_IPQ4019=y
+CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NET_PTP_CLASSIFY=y
+CONFIG_NET_SELFTESTS=y
+CONFIG_NET_SWITCHDEV=y
+CONFIG_NLS=y
+CONFIG_NO_HZ=y
+CONFIG_NO_HZ_COMMON=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_NR_CPUS=4
+CONFIG_NVMEM=y
+CONFIG_NVMEM_QCOM_QFPROM=y
+# CONFIG_NVMEM_SPMI_SDAM is not set
+CONFIG_NVMEM_SYSFS=y
+CONFIG_OF=y
+CONFIG_OF_ADDRESS=y
+CONFIG_OF_EARLY_FLATTREE=y
+CONFIG_OF_FLATTREE=y
+CONFIG_OF_GPIO=y
+CONFIG_OF_IRQ=y
+CONFIG_OF_KOBJ=y
+CONFIG_OF_MDIO=y
+CONFIG_OLD_SIGACTION=y
+CONFIG_OLD_SIGSUSPEND3=y
+CONFIG_OPTEE=y
+CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1
+CONFIG_PADATA=y
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PCI=y
+CONFIG_PCIEAER=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCIE_DW=y
+CONFIG_PCIE_DW_HOST=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
+CONFIG_PCI_DOMAINS=y
+CONFIG_PCI_DOMAINS_GENERIC=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_MSI_IRQ_DOMAIN=y
+CONFIG_PERF_USE_VMALLOC=y
+CONFIG_PGTABLE_LEVELS=2
+CONFIG_PHYLIB=y
+CONFIG_PHYLINK=y
+# CONFIG_PHY_QCOM_APQ8064_SATA is not set
+CONFIG_PHY_QCOM_IPQ4019_USB=y
+# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
+# CONFIG_PHY_QCOM_IPQ806X_USB is not set
+# CONFIG_PHY_QCOM_PCIE2 is not set
+# CONFIG_PHY_QCOM_QMP is not set
+# CONFIG_PHY_QCOM_QUSB2 is not set
+# CONFIG_PHY_QCOM_USB_HS_28NM is not set
+# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
+# CONFIG_PHY_QCOM_USB_SS is not set
+CONFIG_PHYS_OFFSET=0
+CONFIG_PINCTRL=y
+# CONFIG_PINCTRL_APQ8064 is not set
+# CONFIG_PINCTRL_APQ8084 is not set
+CONFIG_PINCTRL_IPQ4019=y
+# CONFIG_PINCTRL_IPQ6018 is not set
+# CONFIG_PINCTRL_IPQ8064 is not set
+# CONFIG_PINCTRL_IPQ8074 is not set
+# CONFIG_PINCTRL_MDM9615 is not set
+CONFIG_PINCTRL_MSM=y
+# CONFIG_PINCTRL_MSM8226 is not set
+# CONFIG_PINCTRL_MSM8660 is not set
+# CONFIG_PINCTRL_MSM8909 is not set
+# CONFIG_PINCTRL_MSM8916 is not set
+# CONFIG_PINCTRL_MSM8960 is not set
+# CONFIG_PINCTRL_MSM8976 is not set
+# CONFIG_PINCTRL_MSM8994 is not set
+# CONFIG_PINCTRL_MSM8996 is not set
+# CONFIG_PINCTRL_MSM8998 is not set
+# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set
+# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
+# CONFIG_PINCTRL_QCS404 is not set
+# CONFIG_PINCTRL_SC7180 is not set
+# CONFIG_PINCTRL_SDM660 is not set
+# CONFIG_PINCTRL_SDM845 is not set
+# CONFIG_PINCTRL_SM8150 is not set
+# CONFIG_PINCTRL_SM8250 is not set
+# CONFIG_PINCTRL_SDX65 is not set
+# CONFIG_PHY_QCOM_EDP is not set
+CONFIG_PM_OPP=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_PPS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_PTP_1588_CLOCK=y
+CONFIG_PTP_1588_CLOCK_OPTIONAL=y
+CONFIG_QCA807X_PHY=y
+# CONFIG_QCM_GCC_2290 is not set
+# CONFIG_QCM_DISPCC_2290 is not set
+CONFIG_QCOM_A53PLL=y
+# CONFIG_QCOM_ADM is not set
+CONFIG_QCOM_BAM_DMA=y
+# CONFIG_QCOM_COMMAND_DB is not set
+# CONFIG_QCOM_CPR is not set
+# CONFIG_QCOM_EBI2 is not set
+# CONFIG_QCOM_GENI_SE is not set
+# CONFIG_QCOM_GSBI is not set
+# CONFIG_QCOM_HFPLL is not set
+# CONFIG_QCOM_ICC_BWMON is not set
+# CONFIG_QCOM_IOMMU is not set
+CONFIG_QCOM_IPQ4019_ESS_EDMA=y
+# CONFIG_QCOM_LLCC is not set
+# CONFIG_QCOM_OCMEM is not set
+# CONFIG_QCOM_PDC is not set
+# CONFIG_QCOM_RMTFS_MEM is not set
+# CONFIG_QCOM_RPMH is not set
+CONFIG_QCOM_SCM=y
+# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
+CONFIG_QCOM_SMEM=y
+# CONFIG_QCOM_SMSM is not set
+# CONFIG_QCOM_SOCINFO is not set
+# CONFIG_QCOM_SPM is not set
+# CONFIG_QCOM_STATS is not set
+CONFIG_QCOM_TCSR=y
+# CONFIG_QCOM_TSENS is not set
+CONFIG_QCOM_WDT=y
+# CONFIG_QCS_GCC_404 is not set
+# CONFIG_QCS_Q6SSTOP_404 is not set
+# CONFIG_QCS_TURING_404 is not set
+CONFIG_RAS=y
+CONFIG_RATIONAL=y
+CONFIG_REGMAP=y
+CONFIG_REGMAP_I2C=y
+CONFIG_REGMAP_MMIO=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_QCOM_LABIBB is not set
+# CONFIG_REGULATOR_QCOM_SPMI is not set
+# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
+CONFIG_REGULATOR_VCTRL=y
+CONFIG_REGULATOR_VQMMC_IPQ4019=y
+CONFIG_RESET_CONTROLLER=y
+# CONFIG_RESET_QCOM_AOSS is not set
+# CONFIG_RESET_QCOM_PDC is not set
+CONFIG_RFS_ACCEL=y
+CONFIG_RPS=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_OPTEE is not set
+CONFIG_RTC_I2C_AND_SPI=y
+CONFIG_RTC_MC146818_LIB=y
+CONFIG_RWSEM_SPIN_ON_OWNER=y
+# CONFIG_SC_CAMCC_7280 is not set
+# CONFIG_SC_DISPCC_7180 is not set
+# CONFIG_SC_GCC_7180 is not set
+# CONFIG_SC_GCC_8280XP is not set
+# CONFIG_SC_GPUCC_7180 is not set
+# CONFIG_SC_LPASS_CORECC_7180 is not set
+# CONFIG_SC_LPASSCC_7280 is not set
+# CONFIG_SC_LPASS_CORECC_7280 is not set
+# CONFIG_SC_MSS_7180 is not set
+# CONFIG_SC_VIDEOCC_7180 is not set
+# CONFIG_SDM_CAMCC_845 is not set
+# CONFIG_SDM_DISPCC_845 is not set
+# CONFIG_SDM_GCC_660 is not set
+# CONFIG_SDM_GCC_845 is not set
+# CONFIG_SDM_GPUCC_845 is not set
+# CONFIG_SDM_LPASSCC_845 is not set
+# CONFIG_SDM_VIDEOCC_845 is not set
+# CONFIG_SDX_GCC_65 is not set
+CONFIG_SERIAL_8250_FSL=y
+CONFIG_SERIAL_MCTRL_GPIO=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SGL_ALLOC=y
+CONFIG_SMP=y
+CONFIG_SMP_ON_UP=y
+# CONFIG_SM_CAMCC_8450 is not set
+# CONFIG_SM_GCC_8150 is not set
+# CONFIG_SM_GCC_8250 is not set
+# CONFIG_SM_GCC_8450 is not set
+# CONFIG_SM_GPUCC_6350 is not set
+# CONFIG_SM_GPUCC_8150 is not set
+# CONFIG_SM_GPUCC_8250 is not set
+# CONFIG_SM_GPUCC_8350 is not set
+# CONFIG_SM_VIDEOCC_8150 is not set
+# CONFIG_SM_VIDEOCC_8250 is not set
+CONFIG_SOCK_RX_QUEUE_MAPPING=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+CONFIG_SPI_MASTER=y
+CONFIG_SPI_MEM=y
+CONFIG_SPI_QUP=y
+CONFIG_SPMI=y
+# CONFIG_SPMI_HISI3670 is not set
+CONFIG_SPMI_MSM_PMIC_ARB=y
+# CONFIG_SPMI_PMIC_CLKDIV is not set
+CONFIG_SRCU=y
+CONFIG_SWPHY=y
+CONFIG_SWP_EMULATE=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_TEE=y
+CONFIG_THERMAL=y
+CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
+CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
+CONFIG_THERMAL_GOV_STEP_WISE=y
+CONFIG_THERMAL_OF=y
+CONFIG_TICK_CPU_ACCOUNTING=y
+CONFIG_TIMER_OF=y
+CONFIG_TIMER_PROBE=y
+CONFIG_TREE_RCU=y
+CONFIG_TREE_SRCU=y
+# CONFIG_TRUSTED_KEYS_TEE is not set
+CONFIG_UBIFS_FS=y
+CONFIG_UEVENT_HELPER_PATH=""
+CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_UNWINDER_ARM=y
+CONFIG_USB=y
+CONFIG_USB_COMMON=y
+CONFIG_USB_SUPPORT=y
+CONFIG_USE_OF=y
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_WATCHDOG_CORE=y
+CONFIG_XPS=y
+CONFIG_XXHASH=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_BCJ=y
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZSTD_COMPRESS=y
+CONFIG_ZSTD_DECOMPRESS=y

6.6/target/linux/ipq40xx.new/dts/platform_name.dtsi

@@ -0,0 +1 @@
+/ { platform = "RUTX"; }; 

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-08.dts

@@ -0,0 +1,24 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX08";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-08_STM32.dts

@@ -0,0 +1,26 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX08 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-09.dts

@@ -0,0 +1,106 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX09";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-09_STM32.dts

@@ -0,0 +1,108 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX09 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-10.dts

@@ -0,0 +1,38 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX10";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-10_STM32.dts

@@ -0,0 +1,40 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX10 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-11.dts

@@ -0,0 +1,121 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX11";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-11_STM32.dts

@@ -0,0 +1,123 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX11 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_2 {
+				label = "mob_ssid_2";
+				gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_4 {
+				label = "mob_ssid_4";
+				gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-12.dts

@@ -0,0 +1,148 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX12";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 16 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 17 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_reset {
+				gpio-export,name = "modem2_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 18 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_power {
+				gpio-export,name = "modem2_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_2 {
+				label = "mob2_gen_2";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_3 {
+				label = "mob2_gen_3";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_4 {
+				label = "mob2_gen_4";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_1 {
+				label = "mob2_ssid_1";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_3 {
+				label = "mob2_ssid_3";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_5 {
+				label = "mob2_ssid_5";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 22 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 23 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-12_STM32.dts

@@ -0,0 +1,150 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX12 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_reset {
+				gpio-export,name = "modem2_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 13 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem2_power {
+				gpio-export,name = "modem2_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+			
+			led_gen_2 {
+				label = "mob_gen_2";
+				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_2 {
+				label = "mob2_gen_2";
+				gpios = <&stm32_io 32 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_3 {
+				label = "mob2_gen_3";
+				gpios = <&stm32_io 33 GPIO_ACTIVE_HIGH>;
+			};
+
+			led2_gen_4 {
+				label = "mob2_gen_4";
+				gpios = <&stm32_io 34 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_1 {
+				label = "mob2_ssid_1";
+				gpios = <&stm32_io 31 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_3 {
+				label = "mob2_ssid_3";
+				gpios = <&stm32_io 30 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led2_ssid_5 {
+				label = "mob2_ssid_5";
+				gpios = <&stm32_io 29 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-14.dts

@@ -0,0 +1,98 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX14";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-14_STM32.dts

@@ -0,0 +1,100 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTX14 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpio-export,direction_may_change;
+				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&stm32_io 19 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&stm32_io 18 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-50.dts

@@ -0,0 +1,110 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+
+/ {
+	model = "RUTX50";
+
+	soc {
+		
+		ext_io {
+			shift_io: shift_io@0 {
+				registers-number = <2>;
+			};
+		};
+
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_out_1 {
+				gpio-export,name = "gpio23";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_in_1 {
+				gpio-export,name = "gpio24";
+				gpio-export,input = <0>;
+				gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 14 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 15 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_wifi {
+				label = "wan_wifi_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_5 {
+				label = "mob_gen_5";
+				gpios = <&shift_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_wifi_24 {
+				label = "wifi_gen_2";
+				gpios = <&shift_io 12 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wifi_50 {
+				label = "wifi_gen_5";
+				gpios = <&shift_io 13 GPIO_ACTIVE_HIGH>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-R1.dts

@@ -0,0 +1,83 @@
+#include "qcom-ipq4018-rutx-shiftreg.dtsi"
+#include "qcom-ipq4018-rutx-i2c.dtsi" // SFP
+
+/ {
+	model = "RUTXR1";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&shift_io 2 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&shift_io 3 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&shift_io 4 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&shift_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&shift_io 11 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_mob {
+				label = "wan_mob_5";
+				gpios = <&shift_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&shift_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&shift_io 7 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&shift_io 8 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&shift_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&shift_io 10 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-R1_STM32.dts

@@ -0,0 +1,82 @@
+#include "qcom-ipq4018-rutx-STM32.dtsi"
+
+/ {
+	model = "RUTXR1 STM32";
+
+	soc {
+		gpio-export {
+			compatible = "gpio-export";
+			#size-cells = <0>;
+
+			gpio_modem_reset {
+				gpio-export,name = "modem_reset";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_modem_power {
+				gpio-export,name = "modem_power";
+				gpio-export,output = <0>;
+				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
+			};
+
+			gpio_sim_select {
+				gpio-export,name = "sim_sel";
+				gpio-export,output = <1>;
+				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
+			};
+		};
+
+		leds {
+			compatible = "gpio-leds";
+
+			led_wan_sim1 {
+				label = "wan_sim_1";
+				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_sim2 {
+				label = "wan_sim_2";
+				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_eth {
+				label = "wan_eth_3";
+				gpios = <&stm32_io 3 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_wan_mob {
+				label = "wan_mob_5";
+				gpios = <&stm32_io 16 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_3 {
+				label = "mob_gen_3";
+				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_gen_4 {
+				label = "mob_gen_4";
+				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
+			};
+
+			led_ssid_1 {
+				label = "mob_ssid_1";
+				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_3 {
+				label = "mob_ssid_3";
+				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+
+			led_ssid_5 {
+				label = "mob_ssid_5";
+				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
+				linux,default-trigger = "timer";
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-STM32.dtsi

@@ -0,0 +1,21 @@
+#include "qcom-ipq4018-rutx-common.dtsi"
+#include "qcom-ipq4018-rutx-i2c.dtsi"
+
+/ {
+	io_expander = "stm32";
+
+	soc {
+		i2c_0: i2c@78b7000 {
+			stm32_io: stm32@74 {
+				#gpio-cells = <2>;
+				compatible = "tlt,stm32v1";
+				reg = <0x74>;
+				gpio-controller;
+				interrupt-parent = <&tlmm>;
+				interrupts = <5 2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-common.dtsi

@@ -0,0 +1,84 @@
+#include "qcom-ipq4019-ap.dk01.1.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include "platform_name.dtsi"
+
+/ {
+	compatible = "teltonika,rutx", "qcom,ap-dk01.1-c2", "qcom,ipq4019";
+
+	memory {
+		device_type = "memory";
+		reg = <0x80000000 0x10000000>;
+	};
+
+	soc {
+		mdio@90000 {
+			status = "ok";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+			phy-reset-gpio = <&tlmm 62 0>;
+
+			ethphy4: ethernet-phy@4 {
+				qcom,fiber-enable;
+			};
+		};
+
+		pinctrl@1000000 {
+			mdio_pins: mdio_pinmux {
+				mux_1 {
+					pins = "gpio53";
+					function = "mdio";
+					bias-pull-up;
+				};
+				mux_2 {
+					pins = "gpio52";
+					function = "mdc";
+					bias-pull-up;
+				};
+			};
+		};
+
+		spi_0: spi@78b5000 {
+			cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
+			num-cs = <2>;
+
+			mx25l25635f@0 {
+				compatible = "n25q128a11", "mx25l25635f", "jedec,spi-nor";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0>;
+				spi-max-frequency = <24000000>;
+			};
+
+			mt29f@1 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "spi-nand","spinand,mt29f";
+				reg = <1>;
+				spi-max-frequency = <24000000>;
+			};
+		};
+
+		gpio_keys {
+			compatible = "gpio-keys";
+
+			reset {
+				label = "reset";
+				gpios = <&tlmm 4 1>;
+				linux,code = <0x198>;
+			};
+		};
+
+		usb3: usb3@8af8800 {
+			dwc3@8a00000 {
+				snps,dis_u2_susphy_quirk;
+				snps,dis_u3_susphy_quirk;
+			};
+		};
+
+		usb2: usb2@60f8800 {
+			dwc3@6000000 {
+				snps,dis_u2_susphy_quirk;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-i2c.dtsi

@@ -0,0 +1,20 @@
+/ {
+	soc {
+		pinctrl@1000000 {
+			i2c_0_pins: i2c_0_pinmux {
+				mux {
+					pins = "gpio58", "gpio59";
+					function = "blsp_i2c0";
+					bias-disable;
+				};
+			};
+		};
+
+		i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
+			pinctrl-0 = <&i2c_0_pins>;
+			pinctrl-names = "default";
+			clock-frequency = <400000>;
+			status = "ok";
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/dts/qcom-ipq4018-rutx-shiftreg.dtsi

@@ -0,0 +1,27 @@
+#include "qcom-ipq4018-rutx-common.dtsi"
+
+/ {
+	io_expander = "shiftreg_1";
+
+	soc {
+		ext_io {
+			compatible = "spi-gpio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpio-sck = <&tlmm 1 GPIO_ACTIVE_HIGH>;  // SRCLK
+			gpio-mosi = <&tlmm 3 GPIO_ACTIVE_HIGH>; // SER
+			cs-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;  // RCLK
+			num-chipselects = <1>;
+
+			shift_io: shift_io@0 {
+				compatible = "fairchild,74hc595";
+				reg = <0>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				registers-number = <3>;
+				spi-max-frequency = <10000000>;
+			};
+		};
+	};
+};

6.6/target/linux/ipq40xx.new/files/drivers/net/phy/qca807x.c

@@ -0,0 +1,859 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2020 Sartura Ltd.
+ *
+ * Author: Robert Marko <robert.marko@sartura.hr>
+ *
+ * Qualcomm QCA8072 and QCA8075 PHY driver
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy.h>
+#include <linux/bitfield.h>
+#include <linux/ethtool_netlink.h>
+#include <linux/gpio.h>
+#include <linux/sfp.h>
+
+#include <dt-bindings/net/qcom-qca807x.h>
+
+#define PHY_ID_QCA8072		0x004dd0b2
+#define PHY_ID_QCA8075		0x004dd0b1
+#define PHY_ID_QCA807X_PSGMII	0x06820805
+
+/* Downshift */
+#define QCA807X_SMARTSPEED_EN			BIT(5)
+#define QCA807X_SMARTSPEED_RETRY_LIMIT_MASK	GENMASK(4, 2)
+#define QCA807X_SMARTSPEED_RETRY_LIMIT_DEFAULT	5
+#define QCA807X_SMARTSPEED_RETRY_LIMIT_MIN	2
+#define QCA807X_SMARTSPEED_RETRY_LIMIT_MAX	9
+
+/* Cable diagnostic test (CDT) */
+#define QCA807X_CDT						0x16
+#define QCA807X_CDT_ENABLE					BIT(15)
+#define QCA807X_CDT_ENABLE_INTER_PAIR_SHORT			BIT(13)
+#define QCA807X_CDT_STATUS					BIT(11)
+#define QCA807X_CDT_MMD3_STATUS					0x8064
+#define QCA807X_CDT_MDI0_STATUS_MASK				GENMASK(15, 12)
+#define QCA807X_CDT_MDI1_STATUS_MASK				GENMASK(11, 8)
+#define QCA807X_CDT_MDI2_STATUS_MASK				GENMASK(7, 4)
+#define QCA807X_CDT_MDI3_STATUS_MASK				GENMASK(3, 0)
+#define QCA807X_CDT_RESULTS_INVALID				0x0
+#define QCA807X_CDT_RESULTS_OK					0x1
+#define QCA807X_CDT_RESULTS_OPEN				0x2
+#define QCA807X_CDT_RESULTS_SAME_SHORT				0x3
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OK	0x4
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OK	0x8
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OK	0xc
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OPEN	0x6
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OPEN	0xa
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OPEN	0xe
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_SHORT	0x7
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_SHORT	0xb
+#define QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_SHORT	0xf
+#define QCA807X_CDT_RESULTS_BUSY				0x9
+#define QCA807X_CDT_MMD3_MDI0_LENGTH				0x8065
+#define QCA807X_CDT_MMD3_MDI1_LENGTH				0x8066
+#define QCA807X_CDT_MMD3_MDI2_LENGTH				0x8067
+#define QCA807X_CDT_MMD3_MDI3_LENGTH				0x8068
+#define QCA807X_CDT_SAME_SHORT_LENGTH_MASK			GENMASK(15, 8)
+#define QCA807X_CDT_CROSS_SHORT_LENGTH_MASK			GENMASK(7, 0)
+
+#define QCA807X_CHIP_CONFIGURATION				0x1f
+#define QCA807X_BT_BX_REG_SEL					BIT(15)
+#define QCA807X_BT_BX_REG_SEL_FIBER				0
+#define QCA807X_BT_BX_REG_SEL_COPPER				1
+#define QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK		GENMASK(3, 0)
+#define QCA807X_CHIP_CONFIGURATION_MODE_QSGMII_SGMII		4
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER		3
+#define QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_ALL_COPPER	0
+
+#define QCA807X_MEDIA_SELECT_STATUS				0x1a
+#define QCA807X_MEDIA_DETECTED_COPPER				BIT(5)
+#define QCA807X_MEDIA_DETECTED_1000_BASE_X			BIT(4)
+#define QCA807X_MEDIA_DETECTED_100_BASE_FX			BIT(3)
+
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION			0x807e
+#define QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN		BIT(0)
+
+#define QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH	0x801a
+#define QCA807X_CONTROL_DAC_MASK				GENMASK(2, 0)
+
+#define QCA807X_MMD7_LED_100N_1				0x8074
+#define QCA807X_MMD7_LED_100N_2				0x8075
+#define QCA807X_MMD7_LED_1000N_1			0x8076
+#define QCA807X_MMD7_LED_1000N_2			0x8077
+#define QCA807X_LED_TXACT_BLK_EN_2			BIT(10)
+#define QCA807X_LED_RXACT_BLK_EN_2			BIT(9)
+#define QCA807X_LED_GT_ON_EN_2				BIT(6)
+#define QCA807X_LED_HT_ON_EN_2				BIT(5)
+#define QCA807X_LED_BT_ON_EN_2				BIT(4)
+#define QCA807X_GPIO_FORCE_EN				BIT(15)
+#define QCA807X_GPIO_FORCE_MODE_MASK			GENMASK(14, 13)
+
+#define QCA807X_INTR_ENABLE				0x12
+#define QCA807X_INTR_STATUS				0x13
+#define QCA807X_INTR_ENABLE_AUTONEG_ERR			BIT(15)
+#define QCA807X_INTR_ENABLE_SPEED_CHANGED		BIT(14)
+#define QCA807X_INTR_ENABLE_DUPLEX_CHANGED		BIT(13)
+#define QCA807X_INTR_ENABLE_LINK_FAIL			BIT(11)
+#define QCA807X_INTR_ENABLE_LINK_SUCCESS		BIT(10)
+
+#define QCA807X_FUNCTION_CONTROL			0x10
+#define QCA807X_FC_MDI_CROSSOVER_MODE_MASK		GENMASK(6, 5)
+#define QCA807X_FC_MDI_CROSSOVER_AUTO			3
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX		1
+#define QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI		0
+
+#define QCA807X_PHY_SPECIFIC_STATUS			0x11
+#define QCA807X_SS_SPEED_AND_DUPLEX_RESOLVED		BIT(11)
+#define QCA807X_SS_SPEED_MASK				GENMASK(15, 14)
+#define QCA807X_SS_SPEED_1000				2
+#define QCA807X_SS_SPEED_100				1
+#define QCA807X_SS_SPEED_10				0
+#define QCA807X_SS_DUPLEX				BIT(13)
+#define QCA807X_SS_MDIX					BIT(6)
+
+/* PSGMII PHY specific */
+#define PSGMII_QSGMII_DRIVE_CONTROL_1			0xb
+#define PSGMII_QSGMII_TX_DRIVER_MASK			GENMASK(7, 4)
+#define PSGMII_MODE_CTRL				0x6d
+#define PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK		BIT(0)
+#define PSGMII_MMD3_SERDES_CONTROL			0x805a
+
+struct qca807x_gpio_priv {
+	struct phy_device *phy;
+};
+
+static int qca807x_get_downshift(struct phy_device *phydev, u8 *data)
+{
+	int val, cnt, enable;
+
+	val = phy_read(phydev, MII_NWAYTEST);
+	if (val < 0)
+		return val;
+
+	enable = FIELD_GET(QCA807X_SMARTSPEED_EN, val);
+	cnt = FIELD_GET(QCA807X_SMARTSPEED_RETRY_LIMIT_MASK, val) + 2;
+
+	*data = enable ? cnt : DOWNSHIFT_DEV_DISABLE;
+
+	return 0;
+}
+
+static int qca807x_set_downshift(struct phy_device *phydev, u8 cnt)
+{
+	int ret, val;
+
+	if (cnt > QCA807X_SMARTSPEED_RETRY_LIMIT_MAX ||
+	    (cnt < QCA807X_SMARTSPEED_RETRY_LIMIT_MIN && cnt != DOWNSHIFT_DEV_DISABLE))
+		return -EINVAL;
+
+	if (!cnt) {
+		ret = phy_clear_bits(phydev, MII_NWAYTEST, QCA807X_SMARTSPEED_EN);
+	} else {
+		val = QCA807X_SMARTSPEED_EN;
+		val |= FIELD_PREP(QCA807X_SMARTSPEED_RETRY_LIMIT_MASK, cnt - 2);
+
+		phy_modify(phydev, MII_NWAYTEST,
+			   QCA807X_SMARTSPEED_EN |
+			   QCA807X_SMARTSPEED_RETRY_LIMIT_MASK,
+			   val);
+	}
+
+	ret = genphy_soft_reset(phydev);
+
+	return ret;
+}
+
+static int qca807x_get_tunable(struct phy_device *phydev,
+			       struct ethtool_tunable *tuna, void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return qca807x_get_downshift(phydev, data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int qca807x_set_tunable(struct phy_device *phydev,
+			       struct ethtool_tunable *tuna, const void *data)
+{
+	switch (tuna->id) {
+	case ETHTOOL_PHY_DOWNSHIFT:
+		return qca807x_set_downshift(phydev, *(const u8 *)data);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static bool qca807x_distance_valid(int result)
+{
+	switch (result) {
+	case QCA807X_CDT_RESULTS_OPEN:
+	case QCA807X_CDT_RESULTS_SAME_SHORT:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+		return true;
+	}
+	return false;
+}
+
+static int qca807x_report_length(struct phy_device *phydev,
+				 int pair, int result)
+{
+	int length;
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA807X_CDT_MMD3_MDI0_LENGTH + pair);
+	if (ret < 0)
+		return ret;
+
+	switch (result) {
+	case ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT:
+		length = (FIELD_GET(QCA807X_CDT_SAME_SHORT_LENGTH_MASK, ret) * 800) / 10;
+		break;
+	case ETHTOOL_A_CABLE_RESULT_CODE_OPEN:
+	case ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT:
+		length = (FIELD_GET(QCA807X_CDT_CROSS_SHORT_LENGTH_MASK, ret) * 800) / 10;
+		break;
+	}
+
+	ethnl_cable_test_fault_length(phydev, pair, length);
+
+	return 0;
+}
+
+static int qca807x_cable_test_report_trans(int result)
+{
+	switch (result) {
+	case QCA807X_CDT_RESULTS_OK:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OK;
+	case QCA807X_CDT_RESULTS_OPEN:
+		return ETHTOOL_A_CABLE_RESULT_CODE_OPEN;
+	case QCA807X_CDT_RESULTS_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_SAME_SHORT;
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OK:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_OPEN:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI1_SAME_SHORT:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI2_SAME_SHORT:
+	case QCA807X_CDT_RESULTS_CROSS_SHORT_WITH_MDI3_SAME_SHORT:
+		return ETHTOOL_A_CABLE_RESULT_CODE_CROSS_SHORT;
+	default:
+		return ETHTOOL_A_CABLE_RESULT_CODE_UNSPEC;
+	}
+}
+
+static int qca807x_cable_test_report(struct phy_device *phydev)
+{
+	int pair0, pair1, pair2, pair3;
+	int ret;
+
+	ret = phy_read_mmd(phydev, MDIO_MMD_PCS, QCA807X_CDT_MMD3_STATUS);
+	if (ret < 0)
+		return ret;
+
+	pair0 = FIELD_GET(QCA807X_CDT_MDI0_STATUS_MASK, ret);
+	pair1 = FIELD_GET(QCA807X_CDT_MDI1_STATUS_MASK, ret);
+	pair2 = FIELD_GET(QCA807X_CDT_MDI2_STATUS_MASK, ret);
+	pair3 = FIELD_GET(QCA807X_CDT_MDI3_STATUS_MASK, ret);
+
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_A,
+				qca807x_cable_test_report_trans(pair0));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_B,
+				qca807x_cable_test_report_trans(pair1));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_C,
+				qca807x_cable_test_report_trans(pair2));
+	ethnl_cable_test_result(phydev, ETHTOOL_A_CABLE_PAIR_D,
+				qca807x_cable_test_report_trans(pair3));
+
+	if (qca807x_distance_valid(pair0))
+		qca807x_report_length(phydev, 0, qca807x_cable_test_report_trans(pair0));
+	if (qca807x_distance_valid(pair1))
+		qca807x_report_length(phydev, 1, qca807x_cable_test_report_trans(pair1));
+	if (qca807x_distance_valid(pair2))
+		qca807x_report_length(phydev, 2, qca807x_cable_test_report_trans(pair2));
+	if (qca807x_distance_valid(pair3))
+		qca807x_report_length(phydev, 3, qca807x_cable_test_report_trans(pair3));
+
+	return 0;
+}
+
+static int qca807x_cable_test_get_status(struct phy_device *phydev,
+					 bool *finished)
+{
+	int val;
+
+	*finished = false;
+
+	val = phy_read(phydev, QCA807X_CDT);
+	if (!((val & QCA807X_CDT_ENABLE) && (val & QCA807X_CDT_STATUS))) {
+		*finished = true;
+
+		return qca807x_cable_test_report(phydev);
+	}
+
+	return 0;
+}
+
+static int qca807x_cable_test_start(struct phy_device *phydev)
+{
+	int val, ret;
+
+	val = phy_read(phydev, QCA807X_CDT);
+	/* Enable inter-pair short check as well */
+	val &= ~QCA807X_CDT_ENABLE_INTER_PAIR_SHORT;
+	val |= QCA807X_CDT_ENABLE;
+	ret = phy_write(phydev, QCA807X_CDT, val);
+
+	return ret;
+}
+
+#ifdef CONFIG_GPIOLIB
+static int qca807x_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int qca807x_gpio_get_reg(unsigned int offset)
+{
+	return QCA807X_MMD7_LED_100N_2 + (offset % 2) * 2;
+}
+
+static int qca807x_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	int val;
+
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset));
+
+	return FIELD_GET(QCA807X_GPIO_FORCE_MODE_MASK, val);
+}
+
+static void qca807x_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	struct qca807x_gpio_priv *priv = gpiochip_get_data(gc);
+	int val;
+
+	val = phy_read_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset));
+	val &= ~QCA807X_GPIO_FORCE_MODE_MASK;
+	val |= QCA807X_GPIO_FORCE_EN;
+	val |= FIELD_PREP(QCA807X_GPIO_FORCE_MODE_MASK, value);
+
+	phy_write_mmd(priv->phy, MDIO_MMD_AN, qca807x_gpio_get_reg(offset), val);
+}
+
+static int qca807x_gpio_dir_out(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	qca807x_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int qca807x_gpio(struct phy_device *phydev)
+{
+	struct device *dev = &phydev->mdio.dev;
+	struct qca807x_gpio_priv *priv;
+	struct gpio_chip *gc;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	priv->phy = phydev;
+
+	gc = devm_kzalloc(dev, sizeof(*gc), GFP_KERNEL);
+	if (!gc)
+		return -ENOMEM;
+
+	gc->label = dev_name(dev);
+	gc->base = -1;
+	gc->ngpio = 2;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+	gc->can_sleep = true;
+	gc->get_direction = qca807x_gpio_get_direction;
+	gc->direction_output = qca807x_gpio_dir_out;
+	gc->get = qca807x_gpio_get;
+	gc->set = qca807x_gpio_set;
+
+	return devm_gpiochip_add_data(dev, gc, priv);
+}
+#endif
+
+static int qca807x_read_copper_status(struct phy_device *phydev)
+{
+	int ss, err, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	err = genphy_read_lpa(phydev);
+	if (err < 0)
+		return err;
+
+	/* Read the QCA807x PHY-Specific Status register copper page,
+	 * which indicates the speed and duplex that the PHY is actually
+	 * using, irrespective of whether we are in autoneg mode or not.
+	 */
+	ss = phy_read(phydev, QCA807X_PHY_SPECIFIC_STATUS);
+	if (ss < 0)
+		return ss;
+
+	if (ss & QCA807X_SS_SPEED_AND_DUPLEX_RESOLVED) {
+		int sfc;
+
+		sfc = phy_read(phydev, QCA807X_FUNCTION_CONTROL);
+		if (sfc < 0)
+			return sfc;
+
+		switch (FIELD_GET(QCA807X_SS_SPEED_MASK, ss)) {
+		case QCA807X_SS_SPEED_10:
+			phydev->speed = SPEED_10;
+			break;
+		case QCA807X_SS_SPEED_100:
+			phydev->speed = SPEED_100;
+			break;
+		case QCA807X_SS_SPEED_1000:
+			phydev->speed = SPEED_1000;
+			break;
+		}
+		if (ss & QCA807X_SS_DUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		if (ss & QCA807X_SS_MDIX)
+			phydev->mdix = ETH_TP_MDI_X;
+		else
+			phydev->mdix = ETH_TP_MDI;
+
+		switch (FIELD_GET(QCA807X_FC_MDI_CROSSOVER_MODE_MASK, sfc)) {
+		case QCA807X_FC_MDI_CROSSOVER_MANUAL_MDI:
+			phydev->mdix_ctrl = ETH_TP_MDI;
+			break;
+		case QCA807X_FC_MDI_CROSSOVER_MANUAL_MDIX:
+			phydev->mdix_ctrl = ETH_TP_MDI_X;
+			break;
+		case QCA807X_FC_MDI_CROSSOVER_AUTO:
+			phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
+			break;
+		}
+	}
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete)
+		phy_resolve_aneg_pause(phydev);
+
+	return 0;
+}
+
+static int qca807x_read_fiber_status(struct phy_device *phydev)
+{
+	int ss, err, lpa, old_link = phydev->link;
+
+	/* Update the link, but return if there was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	/* why bother the PHY if nothing can have changed */
+	if (phydev->autoneg == AUTONEG_ENABLE && old_link && phydev->link)
+		return 0;
+
+	phydev->speed = SPEED_UNKNOWN;
+	phydev->duplex = DUPLEX_UNKNOWN;
+	phydev->pause = 0;
+	phydev->asym_pause = 0;
+
+	if (phydev->autoneg == AUTONEG_ENABLE && phydev->autoneg_complete) {
+		lpa = phy_read(phydev, MII_LPA);
+		if (lpa < 0)
+			return lpa;
+
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+				 phydev->lp_advertising, lpa & LPA_LPACK);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT,
+				 phydev->lp_advertising, lpa & LPA_1000XFULL);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Pause_BIT,
+				 phydev->lp_advertising, lpa & LPA_1000XPAUSE);
+		linkmode_mod_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT,
+				 phydev->lp_advertising,
+				 lpa & LPA_1000XPAUSE_ASYM);
+
+		phy_resolve_aneg_linkmode(phydev);
+	}
+
+	/* Read the QCA807x PHY-Specific Status register fiber page,
+	 * which indicates the speed and duplex that the PHY is actually
+	 * using, irrespective of whether we are in autoneg mode or not.
+	 */
+	ss = phy_read(phydev, QCA807X_PHY_SPECIFIC_STATUS);
+	if (ss < 0)
+		return ss;
+
+	if (ss & QCA807X_SS_SPEED_AND_DUPLEX_RESOLVED) {
+		switch (FIELD_GET(QCA807X_SS_SPEED_MASK, ss)) {
+		case QCA807X_SS_SPEED_100:
+			phydev->speed = SPEED_100;
+			break;
+		case QCA807X_SS_SPEED_1000:
+			phydev->speed = SPEED_1000;
+			break;
+		}
+
+		if (ss & QCA807X_SS_DUPLEX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+	}
+
+	return 0;
+}
+
+static int qca807x_read_status(struct phy_device *phydev)
+{
+	if (linkmode_test_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported)) {
+		switch (phydev->port) {
+		case PORT_FIBRE:
+			return qca807x_read_fiber_status(phydev);
+		case PORT_TP:
+			return qca807x_read_copper_status(phydev);
+		default:
+			return -EINVAL;
+		}
+	} else
+		return qca807x_read_copper_status(phydev);
+}
+
+static int qca807x_config_intr(struct phy_device *phydev)
+{
+	int ret, val;
+
+	val = phy_read(phydev, QCA807X_INTR_ENABLE);
+
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+		/* Check for combo port as it has fewer interrupts */
+		if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+			val |= QCA807X_INTR_ENABLE_SPEED_CHANGED;
+			val |= QCA807X_INTR_ENABLE_LINK_FAIL;
+			val |= QCA807X_INTR_ENABLE_LINK_SUCCESS;
+		} else {
+			val |= QCA807X_INTR_ENABLE_AUTONEG_ERR;
+			val |= QCA807X_INTR_ENABLE_SPEED_CHANGED;
+			val |= QCA807X_INTR_ENABLE_DUPLEX_CHANGED;
+			val |= QCA807X_INTR_ENABLE_LINK_FAIL;
+			val |= QCA807X_INTR_ENABLE_LINK_SUCCESS;
+		}
+		ret = phy_write(phydev, QCA807X_INTR_ENABLE, val);
+	} else {
+		ret = phy_write(phydev, QCA807X_INTR_ENABLE, 0);
+	}
+
+	return ret;
+}
+
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
+static int qca807x_ack_intr(struct phy_device *phydev)
+{
+	int ret;
+
+	ret = phy_read(phydev, QCA807X_INTR_STATUS);
+
+	return (ret < 0) ? ret : 0;
+}
+#else
+static irqreturn_t qca807x_handle_interrupt(struct phy_device *phydev)
+{
+	int irq_status, int_enabled;
+
+	irq_status = phy_read(phydev, QCA807X_INTR_STATUS);
+	if (irq_status < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* Read the current enabled interrupts */
+	int_enabled = phy_read(phydev, QCA807X_INTR_ENABLE);
+	if (int_enabled < 0) {
+		phy_error(phydev);
+		return IRQ_NONE;
+	}
+
+	/* See if this was one of our enabled interrupts */
+	if (!(irq_status & int_enabled))
+		return IRQ_NONE;
+
+	phy_trigger_machine(phydev);
+
+	return IRQ_HANDLED;
+}
+#endif
+
+static int qca807x_led_config(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	bool led_config = false;
+	int val;
+
+	val = phy_read_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_LED_1000N_1);
+	if (val < 0)
+		return val;
+
+	if (of_property_read_bool(node, "qcom,single-led-1000")) {
+		val |= QCA807X_LED_TXACT_BLK_EN_2;
+		val |= QCA807X_LED_RXACT_BLK_EN_2;
+		val |= QCA807X_LED_GT_ON_EN_2;
+
+		led_config = true;
+	}
+
+	if (of_property_read_bool(node, "qcom,single-led-100")) {
+		val |= QCA807X_LED_HT_ON_EN_2;
+
+		led_config = true;
+	}
+
+	if (of_property_read_bool(node, "qcom,single-led-10")) {
+		val |= QCA807X_LED_BT_ON_EN_2;
+
+		led_config = true;
+	}
+
+	if (led_config)
+		return phy_write_mmd(phydev, MDIO_MMD_AN, QCA807X_MMD7_LED_1000N_1, val);
+	else
+		return 0;
+}
+
+static int qca807x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
+{
+	struct phy_device *phydev = upstream;
+	__ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
+	DECLARE_PHY_INTERFACE_MASK(interfaces);
+	phy_interface_t iface;
+	int ret;
+
+	sfp_parse_support(phydev->sfp_bus, id, support, interfaces);
+	iface = sfp_select_interface(phydev->sfp_bus, support);
+
+	dev_info(&phydev->mdio.dev, "%s SFP module inserted\n", phy_modes(iface));
+
+	switch (iface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+	case PHY_INTERFACE_MODE_100BASEX:
+		/* Set PHY mode to PSGMII combo (1/4 copper + combo ports) mode */
+		ret = phy_modify(phydev,
+				 QCA807X_CHIP_CONFIGURATION,
+				 QCA807X_CHIP_CONFIGURATION_MODE_CFG_MASK,
+				 QCA807X_CHIP_CONFIGURATION_MODE_PSGMII_FIBER);
+		/* Enable fiber mode autodection (1000Base-X or 100Base-FX) */
+		ret = phy_set_bits_mmd(phydev,
+				       MDIO_MMD_AN,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION,
+				       QCA807X_MMD7_FIBER_MODE_AUTO_DETECTION_EN);
+		/* Select fiber page */
+		ret = phy_clear_bits(phydev,
+				     QCA807X_CHIP_CONFIGURATION,
+				     QCA807X_BT_BX_REG_SEL);
+
+		phydev->port = PORT_FIBRE;
+		break;
+	default:
+		dev_err(&phydev->mdio.dev, "Incompatible SFP module inserted\n");
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static void qca807x_sfp_remove(void *upstream)
+{
+	struct phy_device *phydev = upstream;
+
+	/* Select copper page */
+	phy_set_bits(phydev,
+		     QCA807X_CHIP_CONFIGURATION,
+		     QCA807X_BT_BX_REG_SEL);
+
+	phydev->port = PORT_TP;
+}
+
+static const struct sfp_upstream_ops qca807x_sfp_ops = {
+	.attach = phy_sfp_attach,
+	.detach = phy_sfp_detach,
+	.module_insert = qca807x_sfp_insert,
+	.module_remove = qca807x_sfp_remove,
+};
+
+static int qca807x_config(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	int control_dac, ret = 0;
+	u32 of_control_dac;
+
+	/* Check for Combo port */
+	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+		int psgmii_serdes;
+
+		/* Prevent PSGMII going into hibernation via PSGMII self test */
+		psgmii_serdes = phy_read_mmd(phydev, MDIO_MMD_PCS, PSGMII_MMD3_SERDES_CONTROL);
+		psgmii_serdes &= ~BIT(1);
+		ret = phy_write_mmd(phydev, MDIO_MMD_PCS,
+				    PSGMII_MMD3_SERDES_CONTROL,
+				    psgmii_serdes);
+	}
+
+	if (!of_property_read_u32(node, "qcom,control-dac", &of_control_dac)) {
+		control_dac = phy_read_mmd(phydev, MDIO_MMD_AN,
+					   QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH);
+		control_dac &= ~QCA807X_CONTROL_DAC_MASK;
+		control_dac |= FIELD_PREP(QCA807X_CONTROL_DAC_MASK, of_control_dac);
+		ret = phy_write_mmd(phydev, MDIO_MMD_AN,
+				    QCA807X_MMD7_1000BASE_T_POWER_SAVE_PER_CABLE_LENGTH,
+				    control_dac);
+	}
+
+	/* Optionally configure LED-s */
+	if (IS_ENABLED(CONFIG_GPIOLIB)) {
+		/* Check whether PHY-s pins are used as GPIO-s */
+		if (!of_property_read_bool(node, "gpio-controller"))
+			ret = qca807x_led_config(phydev);
+	} else {
+		ret = qca807x_led_config(phydev);
+	}
+
+	return ret;
+}
+
+static int qca807x_probe(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	int ret = 0;
+
+	if (IS_ENABLED(CONFIG_GPIOLIB)) {
+		/* Do not register a GPIO controller unless flagged for it */
+		if (of_property_read_bool(node, "gpio-controller"))
+			ret = qca807x_gpio(phydev);
+	}
+
+	/* Attach SFP bus on combo port*/
+	if (phy_read(phydev, QCA807X_CHIP_CONFIGURATION)) {
+		ret = phy_sfp_probe(phydev, &qca807x_sfp_ops);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->supported);
+		linkmode_set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, phydev->advertising);
+	}
+
+	return ret;
+}
+
+static int qca807x_psgmii_config(struct phy_device *phydev)
+{
+	struct device_node *node = phydev->mdio.dev.of_node;
+	int tx_amp, ret = 0;
+	u32 tx_driver_strength;
+
+	/* Workaround to enable AZ transmitting ability */
+	ret = phy_clear_bits_mmd(phydev,
+				 MDIO_MMD_PMAPMD,
+				 PSGMII_MODE_CTRL,
+				 PSGMII_MODE_CTRL_AZ_WORKAROUND_MASK);
+
+	/* PSGMII/QSGMII TX amp set to DT defined value instead of default 600mV */
+	if (!of_property_read_u32(node, "qcom,tx-driver-strength", &tx_driver_strength)) {
+		tx_amp = phy_read(phydev, PSGMII_QSGMII_DRIVE_CONTROL_1);
+		tx_amp &= ~PSGMII_QSGMII_TX_DRIVER_MASK;
+		tx_amp |= FIELD_PREP(PSGMII_QSGMII_TX_DRIVER_MASK, tx_driver_strength);
+		ret = phy_write(phydev, PSGMII_QSGMII_DRIVE_CONTROL_1, tx_amp);
+	}
+
+	return ret;
+}
+
+static struct phy_driver qca807x_drivers[] = {
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8072),
+		.name           = "Qualcomm QCA8072",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config,
+		.read_status	= qca807x_read_status,
+		.config_intr	= qca807x_config_intr,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
+		.ack_interrupt	= qca807x_ack_intr,
+#else
+		.handle_interrupt = qca807x_handle_interrupt,
+#endif
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= qca807x_get_tunable,
+		.set_tunable	= qca807x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca807x_cable_test_get_status,
+	},
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA8075),
+		.name           = "Qualcomm QCA8075",
+		.flags		= PHY_POLL_CABLE_TEST,
+		/* PHY_GBIT_FEATURES */
+		.probe		= qca807x_probe,
+		.config_init	= qca807x_config,
+		.read_status	= qca807x_read_status,
+		.config_intr	= qca807x_config_intr,
+#if LINUX_VERSION_CODE < KERNEL_VERSION(5,12,0)
+		.ack_interrupt	= qca807x_ack_intr,
+#else
+		.handle_interrupt = qca807x_handle_interrupt,
+#endif
+		.soft_reset	= genphy_soft_reset,
+		.get_tunable	= qca807x_get_tunable,
+		.set_tunable	= qca807x_set_tunable,
+		.resume		= genphy_resume,
+		.suspend	= genphy_suspend,
+		.cable_test_start	= qca807x_cable_test_start,
+		.cable_test_get_status	= qca807x_cable_test_get_status,
+	},
+	{
+		PHY_ID_MATCH_EXACT(PHY_ID_QCA807X_PSGMII),
+		.name           = "Qualcomm QCA807x PSGMII",
+		.probe		= qca807x_psgmii_config,
+	},
+};
+module_phy_driver(qca807x_drivers);
+
+static struct mdio_device_id __maybe_unused qca807x_tbl[] = {
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8072) },
+	{ PHY_ID_MATCH_EXACT(PHY_ID_QCA8075) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_QCA807X_PSGMII) },
+	{ }
+};
+
+MODULE_AUTHOR("Robert Marko");
+MODULE_DESCRIPTION("Qualcomm QCA807x PHY driver");
+MODULE_DEVICE_TABLE(mdio, qca807x_tbl);
+MODULE_LICENSE("GPL");

6.6/target/linux/ipq40xx.new/image/uboot_fw/appsboardconfig_premium_tlt

@@ -0,0 +1,80 @@
+[ipq40xx]
+dirname=ipq40xx
+nand_available=true
+nor_available=true
+emmc_available=true
+spi_nand_available=true
+norplusnand_available=true
+norplusemmc_available=false
+nand_pagesize=2048
+nand_pages_per_block=64
+nand_total_blocks=4096
+nand_partition=nand-partition.xml
+nor_pagesize=256
+nor_pages_per_block=256
+nor_total_blocks=512
+nor_partition=nor-partition.xml
+bootconfig=bootconfig.xml
+nand_bootconfig=nand_bootconfig.bin
+nor_bootconfig=nor_bootconfig.bin
+bootconfig1=bootconfig1.xml
+nand_bootconfig1=nand_bootconfig1.bin
+nor_bootconfig1=nor_bootconfig1.bin
+emmc_pagesize=512
+emmc_blocksize=512
+emmc_total_blocks=7634944
+emmc_partition=emmc-partition.xml
+smem_info=["smem-ipq40xx.xml"]
+cdt_info=["pcddr_40xx.xml"]
+cdt_info_default=pcddr_40xx.xml
+nand_partition_mbn=nand-system-partition-ipq40xx.bin
+nor_partition_mbn=nor-system-partition-ipq40xx.bin
+emmc_partition_mbn=gpt_main0.bin
+nand_flash_conf=nand-apps-flash.conf
+nor_flash_conf=nor-apps-flash.conf
+emmc_flash_conf=emmc-apps-flash.conf
+machid=0x8010000
+norplusnand_partition=nor-plus-nand-parition.xml
+norplusnand_flash_conf=norplusnand-apps-flash.conf
+norplusnand_partition_mbn=norplusnand-system-partition-ipq40xx.bin
+
+
+[AP.DK01.1-C2]
+dirname=AP.DK01.1-C2
+nand_available=false
+nor_available=false
+emmc_available=false
+spi_nand_available=true
+norplusnand_available=true
+norplusemmc_available=false
+nand_pagesize=2048
+nand_pages_per_block=64
+nand_total_blocks=4096
+nand_partition=nand-partition.xml
+nor_pagesize=256
+nor_pages_per_block=256
+nor_total_blocks=512
+nor_partition=nor-partition.xml
+bootconfig=bootconfig.xml
+nand_bootconfig=nand_bootconfig.bin
+nor_bootconfig=nor_bootconfig.bin
+bootconfig1=bootconfig1.xml
+nand_bootconfig1=nand_bootconfig1.bin
+nor_bootconfig1=nor_bootconfig1.bin
+emmc_pagesize=512
+emmc_blocksize=512
+emmc_total_blocks=7634944
+emmc_partition=emmc-partition.xml
+smem_info=["smem-AP.DK01.1-C2.xml"]
+cdt_info=["pcddr_AP.DK01.1-C2_64M16.xml", "pcddr_AP.DK01.1-C2_128M16.xml", "pcddr_AP.DK01.1-C2_256M16.xml"]
+cdt_info_default=pcddr_AP.DK01.1-C2.xml
+nand_partition_mbn=nand-system-partition-ipq40xx.bin
+nor_partition_mbn=nor-system-partition-ipq40xx.bin
+emmc_partition_mbn=gpt_main0.bin
+nand_flash_conf=nand-apps-flash.conf
+nor_flash_conf=nor-apps-flash.conf
+emmc_flash_conf=emmc-apps-flash.conf
+machid=0x8010100
+norplusnand_partition=nor-plus-nand-parition.xml
+norplusnand_flash_conf=norplusnand-apps-flash.conf
+norplusnand_partition_mbn=norplusnand-system-partition-ipq40xx.bin

6.6/target/linux/ipq40xx.new/image/uboot_fw/boardconfig_premium_tlt

@@ -0,0 +1,79 @@
+[ipq40xx]
+dirname=ipq40xx
+nand_available=true
+nor_available=true
+emmc_available=true
+spi_nand_available=true
+norplusnand_available=true
+norplusemmc_available=false
+nand_pagesize=2048
+nand_pages_per_block=64
+nand_total_blocks=4096
+nand_partition=nand-partition.xml
+nor_pagesize=256
+nor_pages_per_block=256
+nor_total_blocks=512
+nor_partition=nor-partition.xml
+bootconfig=bootconfig.xml
+nand_bootconfig=nand_bootconfig.bin
+nor_bootconfig=nor_bootconfig.bin
+bootconfig1=bootconfig1.xml
+nand_bootconfig1=nand_bootconfig1.bin
+nor_bootconfig1=nor_bootconfig1.bin
+emmc_pagesize=512
+emmc_blocksize=512
+emmc_total_blocks=7634944
+emmc_partition=emmc-partition.xml
+smem_info=["smem-ipq40xx.xml"]
+cdt_info=["pcddr_40xx.xml"]
+cdt_info_default=pcddr_40xx.xml
+nand_partition_mbn=nand-system-partition-ipq40xx.bin
+nor_partition_mbn=nor-system-partition-ipq40xx.bin
+emmc_partition_mbn=gpt_main0.bin
+nand_flash_conf=nand-flash.conf
+nor_flash_conf=nor-flash.conf
+emmc_flash_conf=emmc-flash.conf
+machid=0x8010000
+norplusnand_partition=nor-plus-nand-parition.xml
+norplusnand_flash_conf=norplusnand-flash.conf
+norplusnand_partition_mbn=norplusnand-system-partition-ipq40xx.bin
+
+[AP.DK01.1-C2]
+dirname=AP.DK01.1-C2
+nand_available=false
+nor_available=false
+emmc_available=false
+spi_nand_available=true
+norplusnand_available=true
+norplusemmc_available=false
+nand_pagesize=2048
+nand_pages_per_block=64
+nand_total_blocks=4096
+nand_partition=nand-partition.xml
+nor_pagesize=256
+nor_pages_per_block=256
+nor_total_blocks=512
+nor_partition=nor-partition.xml
+bootconfig=bootconfig.xml
+nand_bootconfig=nand_bootconfig.bin
+nor_bootconfig=nor_bootconfig.bin
+bootconfig1=bootconfig1.xml
+nand_bootconfig1=nand_bootconfig1.bin
+nor_bootconfig1=nor_bootconfig1.bin
+emmc_pagesize=512
+emmc_blocksize=512
+emmc_total_blocks=7634944
+emmc_partition=emmc-partition.xml
+smem_info=["smem-AP.DK01.1-C2.xml"]
+cdt_info=["pcddr_AP.DK01.1-C2_64M16.xml", "pcddr_AP.DK01.1-C2_128M16.xml", "pcddr_AP.DK01.1-C2_256M16.xml"]
+cdt_info_default=pcddr_AP.DK01.1-C2.xml
+nand_partition_mbn=nand-system-partition-ipq40xx.bin
+nor_partition_mbn=nor-system-partition-ipq40xx.bin
+emmc_partition_mbn=gpt_main0.bin
+nand_flash_conf=nand-flash.conf
+nor_flash_conf=nor-flash.conf
+emmc_flash_conf=emmc-flash.conf
+machid=0x8010100
+norplusnand_partition=nor-plus-nand-parition.xml
+norplusnand_flash_conf=norplusnand-flash.conf
+norplusnand_partition_mbn=norplusnand-system-partition-ipq40xx.bin

6.6/target/linux/ipq40xx.new/image/uboot_fw/norplusnand-apps-flash.conf

@@ -0,0 +1,17 @@
+[ubi]
+partition = rootfs
+filename = file.ubi
+
+[ubi_1]
+partition = rootfs_1
+filename = file.ubi
+primary = ubi
+
+[u-boot]
+partition = 0:APPSBL
+filename = file.elf
+
+[u-boot_1]
+partition = 0:APPSBL_1
+filename = file.elf
+primary = u-boot

6.6/target/linux/ipq40xx.new/image/uboot_fw/norplusnand-flash.conf

@@ -0,0 +1,53 @@
+[mibib]
+partition = 0:MIBIB
+filename = norplusnand-system-partition-ipq40xx.bin
+
+[sbl1]
+partition = 0:SBL1
+filename = sbl1_nor.mbn
+
+[bootconfig]
+partition = 0:BOOTCONFIG
+filename = nor_bootconfig.bin
+
+[bootconfig_1]
+partition = 0:BOOTCONFIG1
+filename = nor_bootconfig1.bin
+
+[ddr-teltonika,rutx]
+partition = 0:CDT
+filename = cdt-AP.DK01.1-C2.bin
+if_machid = 0x8010100
+
+[ddr-teltonika,rutx_1]
+partition = 0:CDT_1
+filename = cdt-AP.DK01.1-C2.bin
+if_machid = 0x8010100
+primary = ddr-teltonika,rutx
+
+[tz]
+partition = 0:QSEE
+filename = tz.mbn
+
+[tz_1]
+partition = 0:QSEE_1
+filename = tz.mbn
+primary = tz
+
+[u-boot]
+partition = 0:APPSBL
+filename = file.elf
+
+[u-boot_1]
+partition = 0:APPSBL_1
+filename = file.elf
+primary = u-boot
+
+[ubi]
+partition = rootfs
+filename = file.ubi
+
+[ubi_1]
+partition = rootfs_1
+filename = file.ubi
+primary = ubi

6.6/target/linux/ipq40xx.new/patches-6.1/104-clk-fix-apss-cpu-overclocking.patch

@@ -0,0 +1,115 @@
+From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@googlemail.com>
+Date: Sun, 11 Mar 2018 14:41:31 +0100
+Subject: [PATCH 2/2] clk: fix apss cpu overclocking
+
+There's an interaction issue between the clk changes:"
+clk: qcom: ipq4019: Add the apss cpu pll divider clock node
+clk: qcom: ipq4019: remove fixed clocks and add pll clocks
+" and the cpufreq-dt.
+
+cpufreq-dt is now spamming the kernel-log with the following:
+
+[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP
+for freq 761142857 (-34)
+
+This only happens on certain devices like the Compex WPJ428
+and AVM FritzBox!4040. However, other devices like the Asus
+RT-AC58U and Meraki MR33 work just fine.
+
+The issue stem from the fact that all higher CPU-Clocks
+are achieved by switching the clock-parent to the P_DDRPLLAPSS
+(ddrpllapss). Which is set by Qualcomm's proprietary bootcode
+as part of the DDR calibration.
+
+For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked
+at round 533 MHz (ddrpllsdcc = 190285714 Hz).
+
+whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is
+clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz).
+
+This patch attempts to fix the issue by modifying
+clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate()
+to use a new qcom_find_freq_close() function, which returns the closest
+matching frequency, instead of the next higher. This way, the SoC in
+the FB4040 (with its max clock speed of 710.4 MHz) will no longer
+try to overclock to 761 MHz.
+
+Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
+ 1 file changed, 31 insertions(+), 3 deletions(-)
+
+--- a/drivers/clk/qcom/gcc-ipq4019.c
++++ b/drivers/clk/qcom/gcc-ipq4019.c
+@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe
+ 	.reg = 0x2f020,
+ };
+ 
++
++const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f,
++					     unsigned long rate)
++{
++	const struct freq_tbl *last = NULL;
++
++	for ( ; f->freq; f++) {
++		if (rate == f->freq)
++			return f;
++
++		if (f->freq > rate) {
++			if (!last ||
++			   (f->freq - rate) < (rate - last->freq))
++				return f;
++			else
++				return last;
++		}
++		last = f;
++	}
++
++	return last;
++}
++
+ /*
+  * Round rate function for APSS CPU PLL Clock divider.
+  * It looks up the frequency table and returns the next higher frequency
+@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc
+ 	struct clk_hw *p_hw;
+ 	const struct freq_tbl *f;
+ 
+-	f = qcom_find_freq(pll->freq_tbl, rate);
++	f = qcom_find_freq_close(pll->freq_tbl, rate);
+ 	if (!f)
+ 		return -EINVAL;
+ 
+@@ -1277,7 +1300,7 @@ static int clk_cpu_div_set_rate(struct c
+ 	const struct freq_tbl *f;
+ 	u32 mask;
+ 
+-	f = qcom_find_freq(pll->freq_tbl, rate);
++	f = qcom_find_freq_close(pll->freq_tbl, rate);
+ 	if (!f)
+ 		return -EINVAL;
+ 
+@@ -1304,6 +1327,7 @@ static unsigned long
+ clk_cpu_div_recalc_rate(struct clk_hw *hw,
+ 			unsigned long parent_rate)
+ {
++	const struct freq_tbl *f;
+ 	struct clk_fepll *pll = to_clk_fepll(hw);
+ 	u32 cdiv, pre_div;
+ 	u64 rate;
+@@ -1324,7 +1348,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
+ 	rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
+ 	do_div(rate, pre_div);
+ 
+-	return rate;
++	f = qcom_find_freq_close(pll->freq_tbl, rate);
++	if (!f)
++		return rate;
++
++	return f->freq;
+ };
+ 
+ static const struct clk_ops clk_regmap_cpu_div_ops = {