mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
Add kernel 6.6 x86_64 support (without modemmanager and wifi)
This commit is contained in:
Ycarus (Yannick Chabanois)
parent
8c8c8d9eaf
commit
c89361bdd7
398 changed files with 79597 additions and 2 deletions
557
6.6/target/linux/qualcommax/config-6.1
Normal file
557
6.6/target/linux/qualcommax/config-6.1
Normal file
|
|
@ -0,0 +1,557 @@
|
|||
CONFIG_64BIT=y
|
||||
# CONFIG_APQ_GCC_8084 is not set
|
||||
# CONFIG_APQ_MMCC_8084 is not set
|
||||
CONFIG_ARCH_BINFMT_ELF_EXTRA_PHDRS=y
|
||||
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
|
||||
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
|
||||
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
|
||||
CONFIG_ARCH_KEEP_MEMBLOCK=y
|
||||
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y
|
||||
CONFIG_ARCH_MMAP_RND_BITS=18
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MAX=24
|
||||
CONFIG_ARCH_MMAP_RND_BITS_MIN=18
|
||||
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
|
||||
CONFIG_ARCH_NR_GPIO=0
|
||||
CONFIG_ARCH_PROC_KCORE_TEXT=y
|
||||
CONFIG_ARCH_QCOM=y
|
||||
CONFIG_ARCH_SPARSEMEM_ENABLE=y
|
||||
CONFIG_ARCH_STACKWALK=y
|
||||
CONFIG_ARCH_SUSPEND_POSSIBLE=y
|
||||
CONFIG_ARCH_WANTS_NO_INSTR=y
|
||||
CONFIG_ARCH_WANTS_THP_SWAP=y
|
||||
CONFIG_ARM64=y
|
||||
CONFIG_ARM64_4K_PAGES=y
|
||||
CONFIG_ARM64_ERRATUM_1165522=y
|
||||
CONFIG_ARM64_ERRATUM_1286807=y
|
||||
CONFIG_ARM64_ERRATUM_2051678=y
|
||||
CONFIG_ARM64_ERRATUM_2054223=y
|
||||
CONFIG_ARM64_ERRATUM_2067961=y
|
||||
CONFIG_ARM64_ERRATUM_2077057=y
|
||||
CONFIG_ARM64_ERRATUM_2658417=y
|
||||
CONFIG_ARM64_LD_HAS_FIX_ERRATUM_843419=y
|
||||
CONFIG_ARM64_PAGE_SHIFT=12
|
||||
CONFIG_ARM64_PA_BITS=48
|
||||
CONFIG_ARM64_PA_BITS_48=y
|
||||
CONFIG_ARM64_PTR_AUTH=y
|
||||
CONFIG_ARM64_PTR_AUTH_KERNEL=y
|
||||
CONFIG_ARM64_SME=y
|
||||
CONFIG_ARM64_SVE=y
|
||||
CONFIG_ARM64_TAGGED_ADDR_ABI=y
|
||||
CONFIG_ARM64_VA_BITS=39
|
||||
CONFIG_ARM64_VA_BITS_39=y
|
||||
CONFIG_ARM64_WORKAROUND_REPEAT_TLBI=y
|
||||
CONFIG_ARM64_WORKAROUND_SPECULATIVE_AT=y
|
||||
CONFIG_ARM64_WORKAROUND_TSB_FLUSH_FAILURE=y
|
||||
CONFIG_ARM_AMBA=y
|
||||
CONFIG_ARM_ARCH_TIMER=y
|
||||
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
|
||||
CONFIG_ARM_GIC=y
|
||||
CONFIG_ARM_GIC_V2M=y
|
||||
CONFIG_ARM_GIC_V3=y
|
||||
CONFIG_ARM_GIC_V3_ITS=y
|
||||
CONFIG_ARM_GIC_V3_ITS_PCI=y
|
||||
# CONFIG_ARM_MHU_V2 is not set
|
||||
CONFIG_ARM_PSCI_CPUIDLE=y
|
||||
CONFIG_ARM_PSCI_CPUIDLE_DOMAIN=y
|
||||
CONFIG_ARM_PSCI_FW=y
|
||||
# CONFIG_ARM_QCOM_CPUFREQ_HW is not set
|
||||
CONFIG_ARM_QCOM_CPUFREQ_NVMEM=y
|
||||
CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
|
||||
CONFIG_BLK_DEV_LOOP=y
|
||||
CONFIG_BLK_DEV_SD=y
|
||||
CONFIG_BLK_MQ_PCI=y
|
||||
CONFIG_BLK_MQ_VIRTIO=y
|
||||
CONFIG_BLK_PM=y
|
||||
CONFIG_CAVIUM_TX2_ERRATUM_219=y
|
||||
CONFIG_CC_HAVE_SHADOW_CALL_STACK=y
|
||||
CONFIG_CC_HAVE_STACKPROTECTOR_SYSREG=y
|
||||
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough=5"
|
||||
CONFIG_CC_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_CLONE_BACKWARDS=y
|
||||
CONFIG_COMMON_CLK=y
|
||||
CONFIG_COMMON_CLK_QCOM=y
|
||||
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
|
||||
# CONFIG_COMPAT_32BIT_TIME is not set
|
||||
CONFIG_CONTEXT_TRACKING=y
|
||||
CONFIG_CONTEXT_TRACKING_IDLE=y
|
||||
CONFIG_COREDUMP=y
|
||||
CONFIG_CPUFREQ_DT=y
|
||||
CONFIG_CPUFREQ_DT_PLATDEV=y
|
||||
CONFIG_CPU_FREQ=y
|
||||
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
|
||||
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y
|
||||
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
|
||||
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
|
||||
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
|
||||
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
|
||||
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
|
||||
CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
|
||||
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
|
||||
CONFIG_CPU_FREQ_STAT=y
|
||||
CONFIG_CPU_FREQ_THERMAL=y
|
||||
CONFIG_CPU_IDLE=y
|
||||
CONFIG_CPU_IDLE_GOV_MENU=y
|
||||
CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y
|
||||
CONFIG_CPU_LITTLE_ENDIAN=y
|
||||
CONFIG_CPU_PM=y
|
||||
CONFIG_CPU_RMAP=y
|
||||
CONFIG_CPU_THERMAL=y
|
||||
CONFIG_CRC16=y
|
||||
CONFIG_CRC8=y
|
||||
CONFIG_CRYPTO_AUTHENC=y
|
||||
CONFIG_CRYPTO_CBC=y
|
||||
CONFIG_CRYPTO_DEFLATE=y
|
||||
CONFIG_CRYPTO_DEV_QCE=y
|
||||
CONFIG_CRYPTO_DEV_QCE_AEAD=y
|
||||
# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set
|
||||
CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL=y
|
||||
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set
|
||||
# CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER is not set
|
||||
CONFIG_CRYPTO_DEV_QCE_SHA=y
|
||||
CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y
|
||||
CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512
|
||||
CONFIG_CRYPTO_DEV_QCOM_RNG=y
|
||||
CONFIG_CRYPTO_ECB=y
|
||||
CONFIG_CRYPTO_HASH_INFO=y
|
||||
CONFIG_CRYPTO_HW=y
|
||||
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
|
||||
CONFIG_CRYPTO_LIB_DES=y
|
||||
CONFIG_CRYPTO_LIB_SHA1=y
|
||||
CONFIG_CRYPTO_LIB_SHA256=y
|
||||
CONFIG_CRYPTO_LIB_UTILS=y
|
||||
CONFIG_CRYPTO_LZO=y
|
||||
CONFIG_CRYPTO_RNG=y
|
||||
CONFIG_CRYPTO_RNG2=y
|
||||
CONFIG_CRYPTO_SHA1=y
|
||||
CONFIG_CRYPTO_SHA256=y
|
||||
CONFIG_CRYPTO_XTS=y
|
||||
CONFIG_CRYPTO_ZSTD=y
|
||||
CONFIG_DCACHE_WORD_ACCESS=y
|
||||
CONFIG_DEBUG_INFO=y
|
||||
CONFIG_DEV_COREDUMP=y
|
||||
CONFIG_DMADEVICES=y
|
||||
CONFIG_DMA_DIRECT_REMAP=y
|
||||
CONFIG_DMA_ENGINE=y
|
||||
CONFIG_DMA_OF=y
|
||||
CONFIG_DMA_VIRTUAL_CHANNELS=y
|
||||
CONFIG_DTC=y
|
||||
CONFIG_DT_IDLE_GENPD=y
|
||||
CONFIG_DT_IDLE_STATES=y
|
||||
CONFIG_EDAC_SUPPORT=y
|
||||
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
|
||||
CONFIG_FIXED_PHY=y
|
||||
CONFIG_FIX_EARLYCON_MEM=y
|
||||
CONFIG_FRAME_POINTER=y
|
||||
CONFIG_FUJITSU_ERRATUM_010001=y
|
||||
CONFIG_FWNODE_MDIO=y
|
||||
CONFIG_FW_LOADER_PAGED_BUF=y
|
||||
CONFIG_FW_LOADER_SYSFS=y
|
||||
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
|
||||
CONFIG_GCC_SUPPORTS_DYNAMIC_FTRACE_WITH_REGS=y
|
||||
CONFIG_GENERIC_ALLOCATOR=y
|
||||
CONFIG_GENERIC_ARCH_TOPOLOGY=y
|
||||
CONFIG_GENERIC_BUG=y
|
||||
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS=y
|
||||
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
|
||||
CONFIG_GENERIC_CPU_AUTOPROBE=y
|
||||
CONFIG_GENERIC_CPU_VULNERABILITIES=y
|
||||
CONFIG_GENERIC_CSUM=y
|
||||
CONFIG_GENERIC_EARLY_IOREMAP=y
|
||||
CONFIG_GENERIC_GETTIMEOFDAY=y
|
||||
CONFIG_GENERIC_IDLE_POLL_SETUP=y
|
||||
CONFIG_GENERIC_IOREMAP=y
|
||||
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
|
||||
CONFIG_GENERIC_IRQ_SHOW=y
|
||||
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
|
||||
CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y
|
||||
CONFIG_GENERIC_MSI_IRQ=y
|
||||
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_GENERIC_PCI_IOMAP=y
|
||||
CONFIG_GENERIC_PHY=y
|
||||
CONFIG_GENERIC_PINCONF=y
|
||||
CONFIG_GENERIC_PINCTRL_GROUPS=y
|
||||
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
|
||||
CONFIG_GENERIC_SCHED_CLOCK=y
|
||||
CONFIG_GENERIC_SMP_IDLE_THREAD=y
|
||||
CONFIG_GENERIC_STRNCPY_FROM_USER=y
|
||||
CONFIG_GENERIC_STRNLEN_USER=y
|
||||
CONFIG_GENERIC_TIME_VSYSCALL=y
|
||||
CONFIG_GLOB=y
|
||||
CONFIG_GPIOLIB_IRQCHIP=y
|
||||
CONFIG_GPIO_CDEV=y
|
||||
CONFIG_HARDIRQS_SW_RESEND=y
|
||||
CONFIG_HAS_DMA=y
|
||||
CONFIG_HAS_IOMEM=y
|
||||
CONFIG_HAS_IOPORT_MAP=y
|
||||
CONFIG_HWSPINLOCK=y
|
||||
CONFIG_HWSPINLOCK_QCOM=y
|
||||
CONFIG_I2C=y
|
||||
CONFIG_I2C_BOARDINFO=y
|
||||
CONFIG_I2C_CHARDEV=y
|
||||
CONFIG_I2C_HELPER_AUTO=y
|
||||
# CONFIG_I2C_QCOM_CCI is not set
|
||||
CONFIG_I2C_QUP=y
|
||||
CONFIG_IIO=y
|
||||
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
|
||||
CONFIG_INITRAMFS_SOURCE=""
|
||||
CONFIG_IPQ_APSS_6018=y
|
||||
CONFIG_IPQ_APSS_PLL=y
|
||||
# CONFIG_IPQ_GCC_4019 is not set
|
||||
# CONFIG_IPQ_GCC_6018 is not set
|
||||
# CONFIG_IPQ_GCC_806X is not set
|
||||
CONFIG_IPQ_GCC_8074=y
|
||||
# CONFIG_IPQ_LCC_806X is not set
|
||||
CONFIG_IRQCHIP=y
|
||||
CONFIG_IRQ_DOMAIN=y
|
||||
CONFIG_IRQ_DOMAIN_HIERARCHY=y
|
||||
CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y
|
||||
CONFIG_IRQ_FORCED_THREADING=y
|
||||
CONFIG_IRQ_WORK=y
|
||||
# CONFIG_KPSS_XCC is not set
|
||||
CONFIG_LIBFDT=y
|
||||
CONFIG_LOCK_DEBUGGING_SUPPORT=y
|
||||
CONFIG_LOCK_SPIN_ON_OWNER=y
|
||||
CONFIG_LZO_COMPRESS=y
|
||||
CONFIG_LZO_DECOMPRESS=y
|
||||
CONFIG_MAILBOX=y
|
||||
# CONFIG_MAILBOX_TEST is not set
|
||||
CONFIG_MDIO_BUS=y
|
||||
CONFIG_MDIO_DEVICE=y
|
||||
CONFIG_MDIO_DEVRES=y
|
||||
CONFIG_MDIO_IPQ4019=y
|
||||
# CONFIG_MDM_GCC_9615 is not set
|
||||
# CONFIG_MDM_LCC_9615 is not set
|
||||
CONFIG_MEMFD_CREATE=y
|
||||
# CONFIG_MFD_HI6421_SPMI is not set
|
||||
# CONFIG_MFD_QCOM_RPM is not set
|
||||
CONFIG_MFD_SPMI_PMIC=y
|
||||
CONFIG_MFD_SYSCON=y
|
||||
CONFIG_MIGRATION=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK=y
|
||||
CONFIG_MMC_BLOCK_MINORS=32
|
||||
CONFIG_MMC_CQHCI=y
|
||||
CONFIG_MMC_SDHCI=y
|
||||
CONFIG_MMC_SDHCI_IO_ACCESSORS=y
|
||||
CONFIG_MMC_SDHCI_MSM=y
|
||||
# CONFIG_MMC_SDHCI_PCI is not set
|
||||
CONFIG_MMC_SDHCI_PLTFM=y
|
||||
CONFIG_MODULES_USE_ELF_RELA=y
|
||||
# CONFIG_MSM_GCC_8660 is not set
|
||||
# CONFIG_MSM_GCC_8909 is not set
|
||||
# CONFIG_MSM_GCC_8916 is not set
|
||||
# CONFIG_MSM_GCC_8939 is not set
|
||||
# CONFIG_MSM_GCC_8960 is not set
|
||||
# CONFIG_MSM_GCC_8974 is not set
|
||||
# CONFIG_MSM_GCC_8976 is not set
|
||||
# CONFIG_MSM_GCC_8994 is not set
|
||||
# CONFIG_MSM_GCC_8996 is not set
|
||||
# CONFIG_MSM_GCC_8998 is not set
|
||||
# CONFIG_MSM_GPUCC_8998 is not set
|
||||
# CONFIG_MSM_LCC_8960 is not set
|
||||
# CONFIG_MSM_MMCC_8960 is not set
|
||||
# CONFIG_MSM_MMCC_8974 is not set
|
||||
# CONFIG_MSM_MMCC_8996 is not set
|
||||
# CONFIG_MSM_MMCC_8998 is not set
|
||||
CONFIG_MTD_NAND_CORE=y
|
||||
CONFIG_MTD_NAND_ECC=y
|
||||
CONFIG_MTD_NAND_ECC_SW_HAMMING=y
|
||||
CONFIG_MTD_NAND_QCOM=y
|
||||
CONFIG_MTD_QCOMSMEM_PARTS=y
|
||||
CONFIG_MTD_RAW_NAND=y
|
||||
CONFIG_MTD_SPI_NOR=y
|
||||
CONFIG_MTD_UBI=y
|
||||
CONFIG_MTD_UBI_BEB_LIMIT=20
|
||||
CONFIG_MTD_UBI_BLOCK=y
|
||||
CONFIG_MTD_UBI_WL_THRESHOLD=4096
|
||||
CONFIG_MUTEX_SPIN_ON_OWNER=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
CONFIG_NEED_SG_DMA_LENGTH=y
|
||||
CONFIG_NET_FLOW_LIMIT=y
|
||||
CONFIG_NET_SELFTESTS=y
|
||||
CONFIG_NET_SWITCHDEV=y
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NO_HZ_COMMON=y
|
||||
CONFIG_NO_HZ_IDLE=y
|
||||
CONFIG_NR_CPUS=4
|
||||
CONFIG_NVIDIA_CARMEL_CNP_ERRATUM=y
|
||||
CONFIG_NVMEM=y
|
||||
CONFIG_NVMEM_QCOM_QFPROM=y
|
||||
# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set
|
||||
# CONFIG_NVMEM_SPMI_SDAM is not set
|
||||
CONFIG_NVMEM_SYSFS=y
|
||||
CONFIG_NVMEM_U_BOOT_ENV=y
|
||||
CONFIG_OF=y
|
||||
CONFIG_OF_ADDRESS=y
|
||||
CONFIG_OF_EARLY_FLATTREE=y
|
||||
CONFIG_OF_FLATTREE=y
|
||||
CONFIG_OF_GPIO=y
|
||||
CONFIG_OF_IRQ=y
|
||||
CONFIG_OF_KOBJ=y
|
||||
CONFIG_OF_MDIO=y
|
||||
CONFIG_PADATA=y
|
||||
CONFIG_PAGE_POOL=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
|
||||
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
|
||||
CONFIG_PARTITION_PERCPU=y
|
||||
CONFIG_PCI=y
|
||||
CONFIG_PCIEAER=y
|
||||
CONFIG_PCIEASPM=y
|
||||
CONFIG_PCIEASPM_DEFAULT=y
|
||||
# CONFIG_PCIEASPM_PERFORMANCE is not set
|
||||
# CONFIG_PCIEASPM_POWERSAVE is not set
|
||||
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
|
||||
CONFIG_PCIEPORTBUS=y
|
||||
CONFIG_PCIE_DW=y
|
||||
CONFIG_PCIE_DW_HOST=y
|
||||
CONFIG_PCIE_PME=y
|
||||
CONFIG_PCIE_QCOM=y
|
||||
CONFIG_PCI_DOMAINS=y
|
||||
CONFIG_PCI_DOMAINS_GENERIC=y
|
||||
CONFIG_PCI_MSI=y
|
||||
CONFIG_PCI_MSI_IRQ_DOMAIN=y
|
||||
CONFIG_PGTABLE_LEVELS=3
|
||||
CONFIG_PHYLIB=y
|
||||
CONFIG_PHYS_ADDR_T_64BIT=y
|
||||
# CONFIG_PHY_QCOM_APQ8064_SATA is not set
|
||||
# CONFIG_PHY_QCOM_EDP is not set
|
||||
# CONFIG_PHY_QCOM_IPQ4019_USB is not set
|
||||
# CONFIG_PHY_QCOM_IPQ806X_SATA is not set
|
||||
# CONFIG_PHY_QCOM_IPQ806X_USB is not set
|
||||
# CONFIG_PHY_QCOM_PCIE2 is not set
|
||||
CONFIG_PHY_QCOM_QMP=y
|
||||
CONFIG_PHY_QCOM_QUSB2=y
|
||||
# CONFIG_PHY_QCOM_USB_HS_28NM is not set
|
||||
# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set
|
||||
# CONFIG_PHY_QCOM_USB_SS is not set
|
||||
CONFIG_PINCTRL=y
|
||||
# CONFIG_PINCTRL_IPQ6018 is not set
|
||||
CONFIG_PINCTRL_IPQ8074=y
|
||||
CONFIG_PINCTRL_MSM=y
|
||||
# CONFIG_PINCTRL_MSM8916 is not set
|
||||
# CONFIG_PINCTRL_MSM8976 is not set
|
||||
# CONFIG_PINCTRL_MSM8994 is not set
|
||||
# CONFIG_PINCTRL_MSM8996 is not set
|
||||
# CONFIG_PINCTRL_MSM8998 is not set
|
||||
# CONFIG_PINCTRL_QCM2290 is not set
|
||||
CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
|
||||
# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set
|
||||
# CONFIG_PINCTRL_QCS404 is not set
|
||||
# CONFIG_PINCTRL_SC7180 is not set
|
||||
# CONFIG_PINCTRL_SC8280XP is not set
|
||||
# CONFIG_PINCTRL_SDM660 is not set
|
||||
# CONFIG_PINCTRL_SDM845 is not set
|
||||
# CONFIG_PINCTRL_SM6350 is not set
|
||||
# CONFIG_PINCTRL_SM6375 is not set
|
||||
# CONFIG_PINCTRL_SM8150 is not set
|
||||
# CONFIG_PINCTRL_SM8250 is not set
|
||||
# CONFIG_PINCTRL_SM8450 is not set
|
||||
CONFIG_PM=y
|
||||
# CONFIG_PM8916_WATCHDOG is not set
|
||||
CONFIG_PM_CLK=y
|
||||
CONFIG_PM_GENERIC_DOMAINS=y
|
||||
CONFIG_PM_GENERIC_DOMAINS_OF=y
|
||||
CONFIG_PM_OPP=y
|
||||
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
|
||||
CONFIG_POWER_RESET=y
|
||||
# CONFIG_POWER_RESET_MSM is not set
|
||||
# CONFIG_POWER_RESET_QCOM_PON is not set
|
||||
CONFIG_POWER_SUPPLY=y
|
||||
CONFIG_PREEMPT_NONE_BUILD=y
|
||||
CONFIG_PRINTK_TIME=y
|
||||
CONFIG_PTP_1588_CLOCK_OPTIONAL=y
|
||||
# CONFIG_QCM_DISPCC_2290 is not set
|
||||
# CONFIG_QCM_GCC_2290 is not set
|
||||
# CONFIG_QCOM_A53PLL is not set
|
||||
# CONFIG_QCOM_AOSS_QMP is not set
|
||||
CONFIG_QCOM_APCS_IPC=y
|
||||
CONFIG_QCOM_APM=y
|
||||
# CONFIG_QCOM_APR is not set
|
||||
CONFIG_QCOM_BAM_DMA=y
|
||||
# CONFIG_QCOM_CLK_APCC_MSM8996 is not set
|
||||
# CONFIG_QCOM_CLK_APCS_MSM8916 is not set
|
||||
# CONFIG_QCOM_CLK_APCS_SDX55 is not set
|
||||
# CONFIG_QCOM_COINCELL is not set
|
||||
# CONFIG_QCOM_COMMAND_DB is not set
|
||||
# CONFIG_QCOM_CPR is not set
|
||||
# CONFIG_QCOM_EBI2 is not set
|
||||
# CONFIG_QCOM_FASTRPC is not set
|
||||
CONFIG_QCOM_GDSC=y
|
||||
# CONFIG_QCOM_GENI_SE is not set
|
||||
# CONFIG_QCOM_GSBI is not set
|
||||
# CONFIG_QCOM_HFPLL is not set
|
||||
# CONFIG_QCOM_ICC_BWMON is not set
|
||||
# CONFIG_QCOM_IPCC is not set
|
||||
# CONFIG_QCOM_LLCC is not set
|
||||
CONFIG_QCOM_MDT_LOADER=y
|
||||
# CONFIG_QCOM_MPM is not set
|
||||
# CONFIG_QCOM_OCMEM is not set
|
||||
# CONFIG_QCOM_PDC is not set
|
||||
CONFIG_QCOM_PIL_INFO=y
|
||||
# CONFIG_QCOM_Q6V5_ADSP is not set
|
||||
CONFIG_QCOM_Q6V5_COMMON=y
|
||||
# CONFIG_QCOM_Q6V5_MSS is not set
|
||||
# CONFIG_QCOM_Q6V5_PAS is not set
|
||||
CONFIG_QCOM_Q6V5_WCSS=y
|
||||
# CONFIG_QCOM_RMTFS_MEM is not set
|
||||
# CONFIG_QCOM_RPMH is not set
|
||||
CONFIG_QCOM_RPROC_COMMON=y
|
||||
CONFIG_QCOM_SCM=y
|
||||
# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set
|
||||
# CONFIG_QCOM_SMD_RPM is not set
|
||||
CONFIG_QCOM_SMEM=y
|
||||
CONFIG_QCOM_SMEM_STATE=y
|
||||
CONFIG_QCOM_SMP2P=y
|
||||
# CONFIG_QCOM_SMSM is not set
|
||||
CONFIG_QCOM_SOCINFO=y
|
||||
# CONFIG_QCOM_SPM is not set
|
||||
CONFIG_QCOM_SPMI_ADC5=y
|
||||
# CONFIG_QCOM_SPMI_RRADC is not set
|
||||
# CONFIG_QCOM_STATS is not set
|
||||
# CONFIG_QCOM_SYSMON is not set
|
||||
CONFIG_QCOM_TSENS=y
|
||||
CONFIG_QCOM_VADC_COMMON=y
|
||||
# CONFIG_QCOM_WCNSS_CTRL is not set
|
||||
# CONFIG_QCOM_WCNSS_PIL is not set
|
||||
CONFIG_QCOM_WDT=y
|
||||
# CONFIG_QCS_GCC_404 is not set
|
||||
# CONFIG_QCS_Q6SSTOP_404 is not set
|
||||
# CONFIG_QCS_TURING_404 is not set
|
||||
CONFIG_QUEUED_RWLOCKS=y
|
||||
CONFIG_QUEUED_SPINLOCKS=y
|
||||
CONFIG_RANDSTRUCT_NONE=y
|
||||
CONFIG_RAS=y
|
||||
CONFIG_RATIONAL=y
|
||||
CONFIG_REGMAP=y
|
||||
CONFIG_REGMAP_MMIO=y
|
||||
CONFIG_REGMAP_SPMI=y
|
||||
CONFIG_REGULATOR=y
|
||||
CONFIG_REGULATOR_CPR3=y
|
||||
# CONFIG_REGULATOR_CPR3_NPU is not set
|
||||
CONFIG_REGULATOR_CPR4_APSS=y
|
||||
CONFIG_REGULATOR_FIXED_VOLTAGE=y
|
||||
# CONFIG_REGULATOR_QCOM_LABIBB is not set
|
||||
CONFIG_REGULATOR_QCOM_SPMI=y
|
||||
# CONFIG_REGULATOR_QCOM_USB_VBUS is not set
|
||||
# CONFIG_REGULATOR_VQMMC_IPQ4019 is not set
|
||||
CONFIG_RELOCATABLE=y
|
||||
CONFIG_REMOTEPROC=y
|
||||
CONFIG_REMOTEPROC_CDEV=y
|
||||
CONFIG_RESET_CONTROLLER=y
|
||||
# CONFIG_RESET_QCOM_AOSS is not set
|
||||
# CONFIG_RESET_QCOM_PDC is not set
|
||||
CONFIG_RFS_ACCEL=y
|
||||
CONFIG_RODATA_FULL_DEFAULT_ENABLED=y
|
||||
CONFIG_RPMSG=y
|
||||
CONFIG_RPMSG_CHAR=y
|
||||
# CONFIG_RPMSG_CTRL is not set
|
||||
# CONFIG_RPMSG_NS is not set
|
||||
CONFIG_RPMSG_QCOM_GLINK=y
|
||||
CONFIG_RPMSG_QCOM_GLINK_RPM=y
|
||||
CONFIG_RPMSG_QCOM_GLINK_SMEM=y
|
||||
CONFIG_RPMSG_QCOM_SMD=y
|
||||
# CONFIG_RPMSG_TTY is not set
|
||||
CONFIG_RPS=y
|
||||
CONFIG_RTC_CLASS=y
|
||||
CONFIG_RTC_DRV_PM8XXX=y
|
||||
CONFIG_RTC_I2C_AND_SPI=y
|
||||
CONFIG_RWSEM_SPIN_ON_OWNER=y
|
||||
# CONFIG_SCHED_CORE is not set
|
||||
CONFIG_SCHED_MC=y
|
||||
CONFIG_SCHED_SMT=y
|
||||
CONFIG_SCHED_THERMAL_PRESSURE=y
|
||||
CONFIG_SCSI=y
|
||||
CONFIG_SCSI_COMMON=y
|
||||
# CONFIG_SCSI_LOWLEVEL is not set
|
||||
# CONFIG_SCSI_PROC_FS is not set
|
||||
# CONFIG_SC_CAMCC_7280 is not set
|
||||
# CONFIG_SC_DISPCC_7180 is not set
|
||||
# CONFIG_SC_GCC_7180 is not set
|
||||
# CONFIG_SC_GCC_8280XP is not set
|
||||
# CONFIG_SC_GPUCC_7180 is not set
|
||||
# CONFIG_SC_LPASSCC_7280 is not set
|
||||
# CONFIG_SC_LPASS_CORECC_7180 is not set
|
||||
# CONFIG_SC_LPASS_CORECC_7280 is not set
|
||||
# CONFIG_SC_MSS_7180 is not set
|
||||
# CONFIG_SC_VIDEOCC_7180 is not set
|
||||
# CONFIG_SDM_CAMCC_845 is not set
|
||||
# CONFIG_SDM_DISPCC_845 is not set
|
||||
# CONFIG_SDM_GCC_660 is not set
|
||||
# CONFIG_SDM_GCC_845 is not set
|
||||
# CONFIG_SDM_GPUCC_845 is not set
|
||||
# CONFIG_SDM_LPASSCC_845 is not set
|
||||
# CONFIG_SDM_VIDEOCC_845 is not set
|
||||
# CONFIG_SDX_GCC_65 is not set
|
||||
CONFIG_SERIAL_8250_FSL=y
|
||||
CONFIG_SERIAL_MCTRL_GPIO=y
|
||||
CONFIG_SERIAL_MSM=y
|
||||
CONFIG_SERIAL_MSM_CONSOLE=y
|
||||
CONFIG_SGL_ALLOC=y
|
||||
CONFIG_SG_POOL=y
|
||||
CONFIG_SMP=y
|
||||
# CONFIG_SM_CAMCC_8450 is not set
|
||||
# CONFIG_SM_GCC_8150 is not set
|
||||
# CONFIG_SM_GCC_8250 is not set
|
||||
# CONFIG_SM_GCC_8450 is not set
|
||||
# CONFIG_SM_GPUCC_6350 is not set
|
||||
# CONFIG_SM_GPUCC_8150 is not set
|
||||
# CONFIG_SM_GPUCC_8250 is not set
|
||||
# CONFIG_SM_GPUCC_8350 is not set
|
||||
# CONFIG_SM_VIDEOCC_8150 is not set
|
||||
# CONFIG_SM_VIDEOCC_8250 is not set
|
||||
CONFIG_SOCK_RX_QUEUE_MAPPING=y
|
||||
CONFIG_SOC_BUS=y
|
||||
CONFIG_SOFTIRQ_ON_OWN_STACK=y
|
||||
CONFIG_SPARSEMEM=y
|
||||
CONFIG_SPARSEMEM_EXTREME=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP=y
|
||||
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
|
||||
CONFIG_SPARSE_IRQ=y
|
||||
CONFIG_SPI=y
|
||||
CONFIG_SPI_MASTER=y
|
||||
CONFIG_SPI_MEM=y
|
||||
CONFIG_SPI_QUP=y
|
||||
CONFIG_SPMI=y
|
||||
# CONFIG_SPMI_HISI3670 is not set
|
||||
CONFIG_SPMI_MSM_PMIC_ARB=y
|
||||
# CONFIG_SPMI_PMIC_CLKDIV is not set
|
||||
CONFIG_SRCU=y
|
||||
CONFIG_SWIOTLB=y
|
||||
CONFIG_SWPHY=y
|
||||
CONFIG_SYSCTL_EXCEPTION_TRACE=y
|
||||
CONFIG_THERMAL=y
|
||||
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
|
||||
CONFIG_THERMAL_GOV_STEP_WISE=y
|
||||
CONFIG_THERMAL_OF=y
|
||||
CONFIG_THREAD_INFO_IN_TASK=y
|
||||
CONFIG_TICK_CPU_ACCOUNTING=y
|
||||
CONFIG_TIMER_OF=y
|
||||
CONFIG_TIMER_PROBE=y
|
||||
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
|
||||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TREE_SRCU=y
|
||||
CONFIG_UBIFS_FS=y
|
||||
CONFIG_UBIFS_FS_ADVANCED_COMPR=y
|
||||
# CONFIG_UCLAMP_TASK is not set
|
||||
CONFIG_UNMAP_KERNEL_AT_EL0=y
|
||||
CONFIG_USB=y
|
||||
CONFIG_USB_COMMON=y
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_VIRTIO=y
|
||||
CONFIG_VIRTIO_ANCHOR=y
|
||||
# CONFIG_VIRTIO_BLK is not set
|
||||
# CONFIG_VIRTIO_NET is not set
|
||||
CONFIG_VMAP_STACK=y
|
||||
CONFIG_WANT_DEV_COREDUMP=y
|
||||
CONFIG_WATCHDOG_CORE=y
|
||||
CONFIG_WATCHDOG_SYSFS=y
|
||||
CONFIG_XPS=y
|
||||
CONFIG_XXHASH=y
|
||||
CONFIG_ZLIB_DEFLATE=y
|
||||
CONFIG_ZLIB_INFLATE=y
|
||||
CONFIG_ZONE_DMA32=y
|
||||
CONFIG_ZSTD_COMMON=y
|
||||
CONFIG_ZSTD_COMPRESS=y
|
||||
CONFIG_ZSTD_DECOMPRESS=y
|
||||
515
6.6/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-l8072v2.dts
Executable file
515
6.6/target/linux/qualcommax/files/arch/arm64/boot/dts/qcom/ipq8072-l8072v2.dts
Executable file
|
|
@ -0,0 +1,515 @@
|
|||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/* Copyright 2023 Nokia */
|
||||
/* 55860.com Power 175338101@qq.com */
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "ipq8074.dtsi"
|
||||
#include "ipq8074-hk-cpu.dtsi"
|
||||
#include "ipq8074-ess.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/leds/common.h>
|
||||
|
||||
/ {
|
||||
model = "openmptcprouter_5GX3_L8074V2";
|
||||
compatible = "pangu,l8072v2", "qcom,ipq8074";
|
||||
|
||||
aliases {
|
||||
serial0 = &blsp1_uart5;
|
||||
led-boot = &pwr;
|
||||
led-failsafe = &sys;
|
||||
led-running = &pwr;
|
||||
led-upgrade = &sys;
|
||||
/* Aliases as required by u-boot to patch MAC addresses */
|
||||
ethernet0 = &dp2;
|
||||
ethernet1 = &dp3;
|
||||
ethernet2 = &dp6;
|
||||
label-mac-device = &dp2;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
bootargs-append = " root=/dev/ubiblock0_1";
|
||||
};
|
||||
|
||||
keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
reset {
|
||||
label = "reset";
|
||||
gpios = <&tlmm 34 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_RESTART>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wifi1 {
|
||||
label = "green:wlan2g";
|
||||
gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi0 {
|
||||
label = "green:wlan5g";
|
||||
gpios = <&tlmm 43 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sys: sys {
|
||||
label = "green:sys";
|
||||
gpios = <&tlmm 26 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
pwr: pwr {
|
||||
label = "green:pwr";
|
||||
gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5g1 {
|
||||
label = "green:5g1";
|
||||
gpios = <&tlmm 46 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5g2 {
|
||||
label = "green:5g2";
|
||||
gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5g3 {
|
||||
label = "green:5g3";
|
||||
gpios = <&tlmm 48 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
5g1pwr {
|
||||
label = "green:5g1pwr";
|
||||
gpios = <&tlmm 56 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
5g2pwr {
|
||||
label = "green:5g2pwr";
|
||||
gpios = <&tlmm 55 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
5g3pwr {
|
||||
label = "green:5g3pwr";
|
||||
gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
lan {
|
||||
label = "green:lan";
|
||||
gpios = <&tlmm 49 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wan {
|
||||
label = "green:wan";
|
||||
gpios = <&tlmm 27 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
vpn {
|
||||
label = "green:vpn";
|
||||
gpios = <&tlmm 25 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
fengshan {
|
||||
label = "green:fengshan";
|
||||
gpios = <&tlmm 53 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
dianliang {
|
||||
label = "green:dianliang";
|
||||
gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&prng {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cryptobam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&crypto {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qpic_bam {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tlmm {
|
||||
mdio_pins: mdio-pins {
|
||||
mdc {
|
||||
pins = "gpio68";
|
||||
function = "mdc";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
|
||||
mdio {
|
||||
pins = "gpio69";
|
||||
function = "mdio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
|
||||
i2c_1_pins: i2c-1-state {
|
||||
pins = "gpio50", "gpio51";
|
||||
function = "blsp3_i2c";
|
||||
drive-strength = <8>;
|
||||
bias-disable;
|
||||
};
|
||||
|
||||
button_pins: button_pins {
|
||||
reset_button {
|
||||
pins = "gpio34";
|
||||
function = "gpio";
|
||||
drive-strength = <8>;
|
||||
bias-pull-up;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_spi1 {
|
||||
pinctrl-0 = <&spi_0_pins>;
|
||||
pinctrl-names = "default";
|
||||
cs-gpios = <0>;
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* Bootloader will find the NAND DT node by the compatible and
|
||||
* then "fixup" it by adding the partitions from the SMEM table
|
||||
* using the legacy bindings thus making it impossible for us
|
||||
* to change the partition table or utilize NVMEM for calibration.
|
||||
* So add a dummy partitions node that bootloader will populate
|
||||
* and set it as disabled so the kernel ignores it instead of
|
||||
* printing warnings due to the broken way bootloader adds the
|
||||
* partitions.
|
||||
*/
|
||||
partitions {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
flash@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
reg = <0>;
|
||||
compatible = "jedec,spi-nor";
|
||||
spi-max-frequency = <50000000>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "0:sbl1";
|
||||
reg = <0x0 0x50000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@50000 {
|
||||
label = "0:mibib";
|
||||
reg = <0x50000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@60000 {
|
||||
label = "0:bootconfig";
|
||||
reg = <0x60000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@80000 {
|
||||
label = "0:bootconfig1";
|
||||
reg = <0x80000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@a0000 {
|
||||
label = "0:qsee";
|
||||
reg = <0xa0000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@220000 {
|
||||
label = "0:qsee_1";
|
||||
reg = <0x220000 0x180000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3a0000 {
|
||||
label = "0:devcfg";
|
||||
reg = <0x3a0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3b0000 {
|
||||
label = "0:devcfg_1";
|
||||
reg = <0x3b0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3c0000 {
|
||||
label = "0:apdp";
|
||||
reg = <0x3c0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3d0000 {
|
||||
label = "0:apdp_1";
|
||||
reg = <0x3d0000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@3e0000 {
|
||||
label = "0:rpm";
|
||||
reg = <0x3e0000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@420000 {
|
||||
label = "0:rpm_1";
|
||||
reg = <0x420000 0x40000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@460000 {
|
||||
label = "0:cdt";
|
||||
reg = <0x460000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@470000 {
|
||||
label = "0:cdt_1";
|
||||
reg = <0x470000 0x10000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@480000 {
|
||||
label = "0:appsblenv";
|
||||
reg = <0x480000 0x10000>;
|
||||
};
|
||||
|
||||
partition@490000 {
|
||||
label = "0:appsbl";
|
||||
reg = <0x490000 0xb0000>;
|
||||
};
|
||||
|
||||
partition@540000 {
|
||||
label = "0:appsbl_1";
|
||||
reg = <0x540000 0xb0000>;
|
||||
};
|
||||
|
||||
partition@610000 {
|
||||
label = "0:art";
|
||||
reg = <0x5f0000 0x40000>;
|
||||
};
|
||||
partition@630000 {
|
||||
label = "0:ethphyfw";
|
||||
reg = <0x630000 0x80000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&qpic_nand {
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* Bootloader will find the NAND DT node by the compatible and
|
||||
* then "fixup" it by adding the partitions from the SMEM table
|
||||
* using the legacy bindings thus making it impossible for us
|
||||
* to change the partition table or utilize NVMEM for calibration.
|
||||
* So add a dummy partitions node that bootloader will populate
|
||||
* and set it as disabled so the kernel ignores it instead of
|
||||
* printing warnings due to the broken way bootloader adds the
|
||||
* partitions.
|
||||
*/
|
||||
partitions {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-bus-width = <8>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "rootfs";
|
||||
reg = <0x0000000 0xf800000>;
|
||||
};
|
||||
|
||||
partition@3400000 {
|
||||
label = "0:WIFIFW";
|
||||
reg = <0xf800000 0x800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&blsp1_i2c4 {
|
||||
pinctrl-0 = <&i2c_1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qusb_phy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssphy_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dwc_0 {
|
||||
snps,parkmode-disable-ss-quirk;
|
||||
};
|
||||
|
||||
&dwc_1 {
|
||||
snps,parkmode-disable-ss-quirk;
|
||||
};
|
||||
|
||||
&mdio {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&mdio_pins>;
|
||||
pinctrl-names = "default";
|
||||
reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
|
||||
|
||||
qca8075_1: ethernet-phy@1 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <1>;
|
||||
};
|
||||
|
||||
qca8075_2: ethernet-phy@2 {
|
||||
compatible = "ethernet-phy-ieee802.3-c22";
|
||||
reg = <2>;
|
||||
};
|
||||
|
||||
qca8081: ethernet-phy@28 {
|
||||
compatible = "ethernet-phy-id004d.d101";
|
||||
reg = <28>;
|
||||
reset-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&switch {
|
||||
status = "okay";
|
||||
|
||||
switch_cpu_bmp = <0x1>; /* cpu port bitmap */
|
||||
switch_lan_bmp = <0x3e>; /* lan port bitmap */
|
||||
switch_wan_bmp = <0x40>; /* wan port bitmap */
|
||||
switch_mac_mode = <0x0>; /* mac mode for uniphy instance0*/
|
||||
switch_mac_mode1 = <0xff>; /* mac mode for uniphy instance1*/
|
||||
switch_mac_mode2 = <0x0f>; /* mac mode for uniphy instance2*/
|
||||
bm_tick_mode = <0>; /* bm tick mode */
|
||||
tm_tick_mode = <0>; /* tm tick mode */
|
||||
|
||||
qcom,port_phyinfo {
|
||||
port@0 {
|
||||
port_id = <1>;
|
||||
phy_address = <0>;
|
||||
};
|
||||
port@1 {
|
||||
port_id = <2>;
|
||||
phy_address = <1>;
|
||||
};
|
||||
port@2 {
|
||||
port_id = <3>;
|
||||
phy_address = <2>;
|
||||
};
|
||||
port@3 {
|
||||
port_id = <4>;
|
||||
phy_address = <3>;
|
||||
};
|
||||
port@5 {
|
||||
port_id = <6>;
|
||||
phy_address = <28>;
|
||||
port_mac_sel = "QGMAC_PORT";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&edma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dp2 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_1>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
&dp3 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8075_2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
&dp6 {
|
||||
status = "okay";
|
||||
phy-handle = <&qca8081>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
&pcie_qmp0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
status = "okay";
|
||||
|
||||
perst-gpio = <&tlmm 58 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&wifi {
|
||||
status = "okay";
|
||||
qcom,ath11k-calibration-variant = "Xiaomi-AX3600";
|
||||
};
|
||||
201
6.6/target/linux/qualcommax/image/ipq807x.mk
Executable file
201
6.6/target/linux/qualcommax/image/ipq807x.mk
Executable file
|
|
@ -0,0 +1,201 @@
|
|||
define Device/FitImage
|
||||
KERNEL_SUFFIX := -uImage.itb
|
||||
KERNEL = kernel-bin | libdeflate-gzip | fit gzip $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
||||
KERNEL_NAME := Image
|
||||
endef
|
||||
|
||||
define Device/FitImageLzma
|
||||
KERNEL_SUFFIX := -uImage.itb
|
||||
KERNEL = kernel-bin | lzma | fit lzma $$(KDIR)/image-$$(DEVICE_DTS).dtb
|
||||
KERNEL_NAME := Image
|
||||
endef
|
||||
|
||||
define Device/EmmcImage
|
||||
IMAGES += factory.bin sysupgrade.bin
|
||||
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k
|
||||
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-to 64k | sysupgrade-tar rootfs=$$$$@ | append-metadata
|
||||
endef
|
||||
|
||||
define Device/UbiFit
|
||||
KERNEL_IN_UBI := 1
|
||||
IMAGES := factory.ubi sysupgrade.bin
|
||||
IMAGE/factory.ubi := append-ubi
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
|
||||
define Device/buffalo_wxr-5950ax12
|
||||
$(call Device/FitImage)
|
||||
DEVICE_VENDOR := Buffalo
|
||||
DEVICE_MODEL := WXR-5950AX12
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@hk01
|
||||
SOC := ipq8074
|
||||
IMAGES := sysupgrade.bin
|
||||
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
||||
DEVICE_PACKAGES := ipq-wifi-buffalo_wxr-5950ax12
|
||||
endef
|
||||
TARGET_DEVICES += buffalo_wxr-5950ax12
|
||||
|
||||
define Device/compex_wpq873
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Compex
|
||||
DEVICE_MODEL := WPQ873
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@hk09.wpq873
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES := ipq-wifi-compex_wpq873
|
||||
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
||||
endef
|
||||
TARGET_DEVICES += compex_wpq873
|
||||
|
||||
define Device/dynalink_dl-wrx36
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Dynalink
|
||||
DEVICE_MODEL := DL-WRX36
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@rt5010w-d350-rev0
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES := ipq-wifi-dynalink_dl-wrx36
|
||||
endef
|
||||
TARGET_DEVICES += dynalink_dl-wrx36
|
||||
|
||||
define Device/edgecore_eap102
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Edgecore
|
||||
DEVICE_MODEL := EAP102
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@ac02
|
||||
SOC := ipq8071
|
||||
DEVICE_PACKAGES := ipq-wifi-edgecore_eap102
|
||||
IMAGE/factory.ubi := append-ubi | qsdk-ipq-factory-nand
|
||||
endef
|
||||
TARGET_DEVICES += edgecore_eap102
|
||||
|
||||
define Device/pangu_l8072v2
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := PANGU
|
||||
DEVICE_MODEL := L8072V2
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@hk07
|
||||
SOC := ipq8072
|
||||
endef
|
||||
TARGET_DEVICES += pangu_l8072v2
|
||||
|
||||
define Device/edimax_cax1800
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Edimax
|
||||
DEVICE_MODEL := CAX1800
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@ac03
|
||||
SOC := ipq8070
|
||||
DEVICE_PACKAGES := ipq-wifi-edimax_cax1800
|
||||
endef
|
||||
TARGET_DEVICES += edimax_cax1800
|
||||
|
||||
define Device/netgear_wax218
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
ARTIFACTS := web-ui-factory.fit
|
||||
DEVICE_VENDOR := Netgear
|
||||
DEVICE_MODEL := WAX218
|
||||
DEVICE_DTS_CONFIG := config@hk07
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
SOC := ipq8072
|
||||
ARTIFACT/web-ui-factory.fit := append-image initramfs-uImage.itb | \
|
||||
ubinize-kernel | qsdk-ipq-factory-nand
|
||||
DEVICE_PACKAGES := kmod-spi-gpio kmod-spi-bitbang kmod-gpio-nxp-74hc164 \
|
||||
ipq-wifi-netgear_wax218
|
||||
endef
|
||||
TARGET_DEVICES += netgear_wax218
|
||||
|
||||
define Device/prpl_haze
|
||||
$(call Device/FitImage)
|
||||
$(call Device/EmmcImage)
|
||||
DEVICE_VENDOR := prpl Foundation
|
||||
DEVICE_MODEL := Haze
|
||||
DEVICE_DTS_CONFIG := config@hk09
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES += ath11k-firmware-qcn9074 ipq-wifi-prpl_haze kmod-ath11k-pci
|
||||
endef
|
||||
TARGET_DEVICES += prpl_haze
|
||||
|
||||
define Device/qnap_301w
|
||||
$(call Device/FitImage)
|
||||
$(call Device/EmmcImage)
|
||||
DEVICE_VENDOR := QNAP
|
||||
DEVICE_MODEL := 301w
|
||||
DEVICE_DTS_CONFIG := config@hk01
|
||||
KERNEL_SIZE := 16384k
|
||||
SOC := ipq8072
|
||||
DEVICE_PACKAGES += ipq-wifi-qnap_301w
|
||||
endef
|
||||
TARGET_DEVICES += qnap_301w
|
||||
|
||||
define Device/redmi_ax6
|
||||
$(call Device/xiaomi_ax3600)
|
||||
DEVICE_VENDOR := Redmi
|
||||
DEVICE_MODEL := AX6
|
||||
DEVICE_PACKAGES := ipq-wifi-redmi_ax6
|
||||
endef
|
||||
TARGET_DEVICES += redmi_ax6
|
||||
|
||||
define Device/xiaomi_ax3600
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := AX3600
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@ac04
|
||||
SOC := ipq8071
|
||||
KERNEL_SIZE := 36608k
|
||||
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax3600 kmod-ath10k-ct-smallbuffers ath10k-firmware-qca9887-ct
|
||||
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
||||
ARTIFACTS := initramfs-factory.ubi
|
||||
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
||||
endif
|
||||
endef
|
||||
TARGET_DEVICES += xiaomi_ax3600
|
||||
|
||||
define Device/xiaomi_ax9000
|
||||
$(call Device/FitImage)
|
||||
$(call Device/UbiFit)
|
||||
DEVICE_VENDOR := Xiaomi
|
||||
DEVICE_MODEL := AX9000
|
||||
BLOCKSIZE := 128k
|
||||
PAGESIZE := 2048
|
||||
DEVICE_DTS_CONFIG := config@hk14
|
||||
SOC := ipq8072
|
||||
KERNEL_SIZE := 57344k
|
||||
DEVICE_PACKAGES := ipq-wifi-xiaomi_ax9000 kmod-ath11k-pci ath11k-firmware-qcn9074 \
|
||||
kmod-ath10k-ct ath10k-firmware-qca9887-ct
|
||||
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
||||
ARTIFACTS := initramfs-factory.ubi
|
||||
ARTIFACT/initramfs-factory.ubi := append-image-stage initramfs-uImage.itb | ubinize-kernel
|
||||
endif
|
||||
endef
|
||||
TARGET_DEVICES += xiaomi_ax9000
|
||||
|
||||
define Device/zyxel_nbg7815
|
||||
$(call Device/FitImage)
|
||||
$(call Device/EmmcImage)
|
||||
DEVICE_VENDOR := ZYXEL
|
||||
DEVICE_MODEL := NBG7815
|
||||
DEVICE_DTS_CONFIG := config@nbg7815
|
||||
SOC := ipq8074
|
||||
DEVICE_PACKAGES += ipq-wifi-zyxel_nbg7815 kmod-ath11k-pci kmod-hwmon-tmp103 \
|
||||
kmod-bluetooth
|
||||
endef
|
||||
TARGET_DEVICES += zyxel_nbg7815
|
||||
41
6.6/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
Executable file
41
6.6/target/linux/qualcommax/ipq807x/base-files/etc/board.d/01_leds
Executable file
|
|
@ -0,0 +1,41 @@
|
|||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
|
||||
board_config_update
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
edgecore,eap102)
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wanpoe" "wan"
|
||||
;;
|
||||
pangu,l8072v2)
|
||||
ucidef_set_led_netdev "lan" "LAN" "green:lan" "br-lan"
|
||||
ucidef_set_led_netdev "wan" "WAN" "green:wan" "wan"
|
||||
ucidef_set_led_netdev "wlan5g" "WIFI 5GHz" "green:wlan5g" "phy0-ap0"
|
||||
ucidef_set_led_netdev "wlan2g" "WIFI 2.4GHz" "green:wlan2g" "phy1-ap0"
|
||||
ucidef_set_led_default "power" "POWER" "green:pwr" "1"
|
||||
ucidef_set_led_default "system" "SYSTEM" "green:sys" "1"
|
||||
;;
|
||||
netgear,wax218)
|
||||
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "lan"
|
||||
ucidef_set_led_wlan "wlan5g" "WIFI 5GHz" "blue:wlan5g" "phy0radio"
|
||||
ucidef_set_led_wlan "wlan2g" "WIFI 2.4GHz" "blue:wlan2g" "phy1radio"
|
||||
;;
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600)
|
||||
ucidef_set_led_netdev "wan" "WAN" "blue:network" "wan"
|
||||
;;
|
||||
qnap,301w)
|
||||
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "lan1"
|
||||
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "lan2"
|
||||
ucidef_set_led_netdev "lan3" "LAN3" "green:lan3" "lan3"
|
||||
ucidef_set_led_netdev "lan4" "LAN4" "green:lan4" "lan4"
|
||||
ucidef_set_led_netdev "10G_1" "10G_1" "green:10g_1" "10g-1"
|
||||
ucidef_set_led_netdev "10G_2" "10G_2" "green:10g_2" "10g-2"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
56
6.6/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
Executable file
56
6.6/target/linux/qualcommax/ipq807x/base-files/etc/board.d/02_network
Executable file
|
|
@ -0,0 +1,56 @@
|
|||
#
|
||||
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
|
||||
# Copyright (c) 2011-2015 OpenWrt.org
|
||||
#
|
||||
|
||||
. /lib/functions/uci-defaults.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
ipq807x_setup_interfaces()
|
||||
{
|
||||
local board="$1"
|
||||
|
||||
case "$board" in
|
||||
buffalo,wxr-5950ax12|\
|
||||
dynalink,dl-wrx36|\
|
||||
xiaomi,ax9000)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
ucidef_set_interfaces_lan_wan "lan" "wan"
|
||||
;;
|
||||
edimax,cax1800)
|
||||
ucidef_set_interfaces_lan_wan "lan"
|
||||
;;
|
||||
netgear,wax218)
|
||||
ucidef_set_interface_lan "lan" "dhcp"
|
||||
;;
|
||||
prpl,haze)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
pangu,l8072v2)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
|
||||
;;
|
||||
qnap,301w)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g-2" "10g-1"
|
||||
;;
|
||||
compex,wpq873|\
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
|
||||
;;
|
||||
zyxel,nbg7815)
|
||||
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
|
||||
;;
|
||||
*)
|
||||
echo "Unsupported hardware. Network interfaces not initialized"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
board_config_update
|
||||
board=$(board_name)
|
||||
ipq807x_setup_interfaces $board
|
||||
board_config_flush
|
||||
|
||||
exit 0
|
||||
|
|
@ -0,0 +1,45 @@
|
|||
#!/bin/sh
|
||||
|
||||
[ -e /lib/firmware/$FIRMWARE ] && exit 0
|
||||
|
||||
. /lib/functions/caldata.sh
|
||||
|
||||
board=$(board_name)
|
||||
|
||||
case "$FIRMWARE" in
|
||||
"ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin")
|
||||
case "$board" in
|
||||
buffalo,wxr-5950ax12|\
|
||||
compex,wpq873|\
|
||||
edgecore,eap102|\
|
||||
edimax,cax1800|\
|
||||
dynalink,dl-wrx36|\
|
||||
netgear,wax218|\
|
||||
pangu,l8072v2|\
|
||||
qnap,301w|\
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600|\
|
||||
xiaomi,ax9000|\
|
||||
zyxel,nbg7815)
|
||||
caldata_extract "0:art" 0x1000 0x20000
|
||||
;;
|
||||
prpl,haze)
|
||||
caldata_extract_mmc "0:ART" 0x1000 0x20000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath11k/QCN9074/hw1.0/cal-pci-0000:01:00.0.bin"|\
|
||||
"ath11k/QCN9074/hw1.0/cal-pci-0001:01:00.0.bin")
|
||||
case "$board" in
|
||||
prpl,haze)
|
||||
caldata_extract_mmc "0:ART" 0x26800 0x20000
|
||||
;;
|
||||
xiaomi,ax9000)
|
||||
caldata_extract "0:art" 0x26800 0x20000
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
*)
|
||||
exit 1
|
||||
;;
|
||||
esac
|
||||
118
6.6/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
Executable file
118
6.6/target/linux/qualcommax/ipq807x/base-files/lib/upgrade/platform.sh
Executable file
|
|
@ -0,0 +1,118 @@
|
|||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv head'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
xiaomi_initramfs_prepare() {
|
||||
# Wipe UBI if running initramfs
|
||||
[ "$(rootfs_type)" = "tmpfs" ] || return 0
|
||||
|
||||
local rootfs_mtdnum="$( find_mtd_index rootfs )"
|
||||
if [ ! "$rootfs_mtdnum" ]; then
|
||||
echo "unable to find mtd partition rootfs"
|
||||
return 1
|
||||
fi
|
||||
|
||||
local kern_mtdnum="$( find_mtd_index ubi_kernel )"
|
||||
if [ ! "$kern_mtdnum" ]; then
|
||||
echo "unable to find mtd partition ubi_kernel"
|
||||
return 1
|
||||
fi
|
||||
|
||||
ubidetach -m "$rootfs_mtdnum"
|
||||
ubiformat /dev/mtd$rootfs_mtdnum -y
|
||||
|
||||
ubidetach -m "$kern_mtdnum"
|
||||
ubiformat /dev/mtd$kern_mtdnum -y
|
||||
}
|
||||
|
||||
platform_check_image() {
|
||||
return 0;
|
||||
}
|
||||
|
||||
platform_pre_upgrade() {
|
||||
case "$(board_name)" in
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600|\
|
||||
xiaomi,ax9000)
|
||||
xiaomi_initramfs_prepare
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
buffalo,wxr-5950ax12)
|
||||
CI_KERN_UBIPART="rootfs"
|
||||
CI_ROOT_UBIPART="user_property"
|
||||
buffalo_upgrade_prepare
|
||||
nand_do_flash_file "$1" || nand_do_upgrade_failed
|
||||
nand_do_restore_config || nand_do_upgrade_failed
|
||||
buffalo_upgrade_optvol
|
||||
;;
|
||||
dynalink,dl-wrx36)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
edgecore,eap102)
|
||||
active="$(fw_printenv -n active)"
|
||||
if [ "$active" -eq "1" ]; then
|
||||
CI_UBIPART="rootfs2"
|
||||
else
|
||||
CI_UBIPART="rootfs1"
|
||||
fi
|
||||
# force altbootcmd which handles partition change in u-boot
|
||||
fw_setenv bootcount 3
|
||||
fw_setenv upgrade_available 1
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
pangu,l8072v2|\
|
||||
compex,wpq873|\
|
||||
edimax,cax1800|\
|
||||
netgear,wax218)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
prpl,haze|\
|
||||
qnap,301w)
|
||||
kernelname="0:HLOS"
|
||||
rootfsname="rootfs"
|
||||
mmc_do_upgrade "$1"
|
||||
;;
|
||||
zyxel,nbg7815)
|
||||
local config_mtdnum="$(find_mtd_index 0:bootconfig)"
|
||||
[ -z "$config_mtdnum" ] && reboot
|
||||
part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)"
|
||||
if [ "$part_num" -eq "0" ]; then
|
||||
kernelname="0:HLOS"
|
||||
rootfsname="rootfs"
|
||||
mmc_do_upgrade "$1"
|
||||
else
|
||||
kernelname="0:HLOS_1"
|
||||
rootfsname="rootfs_1"
|
||||
mmc_do_upgrade "$1"
|
||||
fi
|
||||
;;
|
||||
redmi,ax6|\
|
||||
xiaomi,ax3600|\
|
||||
xiaomi,ax9000)
|
||||
# Make sure that UART is enabled
|
||||
fw_setenv boot_wait on
|
||||
fw_setenv uart_en 1
|
||||
|
||||
# Enforce single partition.
|
||||
fw_setenv flag_boot_rootfs 0
|
||||
fw_setenv flag_last_success 0
|
||||
fw_setenv flag_boot_success 1
|
||||
fw_setenv flag_try_sys1_failed 8
|
||||
fw_setenv flag_try_sys2_failed 8
|
||||
|
||||
# Kernel and rootfs are placed in 2 different UBI
|
||||
CI_KERN_UBIPART="ubi_kernel"
|
||||
CI_ROOT_UBIPART="rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
122
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/getmac
Executable file
122
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/getmac
Executable file
|
|
@ -0,0 +1,122 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
usage() {
|
||||
echo "getmac <wifi0 | wifi1 | eth0 | eth1 | eth2 | eth3 | eth4 | eth4 | eth5 *>"
|
||||
echo "example: getmac"
|
||||
echo " getmac eth0"
|
||||
echo " getmac eth1"
|
||||
echo " getmac eth2"
|
||||
echo " getmac eth3"
|
||||
echo " getmac eth4"
|
||||
echo " getmac eth5"
|
||||
echo " getmac wl0"
|
||||
echo " getmac wl1"
|
||||
echo " getmac wl2"
|
||||
}
|
||||
|
||||
art_mtd=$(find_mtd_part 0:art)
|
||||
if [ -z "$art_mtd" ]; then
|
||||
art_mtd=$(find_mmc_part "0:art")
|
||||
fi
|
||||
|
||||
get_eth0()
|
||||
{
|
||||
eth0adr="`hexdump -s 0 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
get_eth1()
|
||||
{
|
||||
eth1adr="`hexdump -s 6 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
get_eth2()
|
||||
{
|
||||
eth2adr="`hexdump -s 12 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
get_eth3()
|
||||
{
|
||||
eth3adr="`hexdump -s 18 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
get_eth4()
|
||||
{
|
||||
eth4adr="`hexdump -s 24 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
get_eth5()
|
||||
{
|
||||
eth5adr="`hexdump -s 30 -n 6 -e '6/1 "%02x:"' "$art_mtd" | cut -b-17`"
|
||||
}
|
||||
|
||||
#wifi0 wifi1都是soc0的子设备，用caldata.bin,wifi1.caldata存放soc1的子设备9889的wifi2的mac
|
||||
get_wifi0()
|
||||
{
|
||||
wifi0adr="`hexdump -s 14 -n 6 -e '6/1 "%02x:"' /lib/firmware/ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin | cut -b -17`"
|
||||
[ "${wifi0adr}" == "" -o "$wifi0adr" = "ff:ff:ff:ff:ff:ff" ] && wifi0adr="`cat /sys/class/net/wifi0/address 2>/dev/null`"
|
||||
ath0adr="$wifi0adr"
|
||||
}
|
||||
|
||||
get_wifi1()
|
||||
{
|
||||
wifi1adr="`hexdump -s 20 -n 6 -e '6/1 "%02x:"' /lib/firmware/ath11k/IPQ8074/hw2.0/cal-ahb-c000000.wifi.bin -e | cut -b -17`"
|
||||
[ "${wifi1adr}" == "" -o "$wifi1adr" = "ff:ff:ff:ff:ff:ff" ] && wifi1adr="`cat /sys/class/net/wifi1/address 2>/dev/null`"
|
||||
ath1adr="$wifi1adr"
|
||||
}
|
||||
|
||||
# eth0 eth1 2g 5g plc eth2 eth3 bt
|
||||
case $1 in
|
||||
-h)
|
||||
usage
|
||||
;;
|
||||
|
||||
wifi0)
|
||||
# wl0=5g iface, to adapt miwifi habit
|
||||
get_wifi0
|
||||
echo "$ath0adr"
|
||||
;;
|
||||
|
||||
wifi1)
|
||||
# wl1=2.4g iface, to adapt miwifi habit
|
||||
get_wifi1
|
||||
echo "$ath1adr"
|
||||
;;
|
||||
|
||||
eth0)
|
||||
get_eth0
|
||||
echo "$eth0adr"
|
||||
;;
|
||||
|
||||
eth1)
|
||||
get_eth1
|
||||
echo "$eth1adr"
|
||||
;;
|
||||
|
||||
eth2)
|
||||
get_eth2
|
||||
echo "$eth2adr"
|
||||
;;
|
||||
|
||||
eth3)
|
||||
get_eth3
|
||||
echo "$eth3adr"
|
||||
;;
|
||||
|
||||
eth4)
|
||||
get_eth4
|
||||
echo "$eth4adr"
|
||||
;;
|
||||
|
||||
eth5)
|
||||
get_eth5
|
||||
echo "$eth5adr"
|
||||
;;
|
||||
|
||||
*)
|
||||
usage
|
||||
;;
|
||||
esac
|
||||
|
||||
219
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/setmac
Executable file
219
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/setmac
Executable file
|
|
@ -0,0 +1,219 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
GETMAC="getmac"
|
||||
art_mtd="0:art"
|
||||
|
||||
baseadr=""
|
||||
eth0adr=""
|
||||
eth1adr=""
|
||||
eth2adr=""
|
||||
eth3adr=""
|
||||
eth4adr=""
|
||||
eth5adr=""
|
||||
|
||||
|
||||
usage() {
|
||||
echo "setmac < eth0 | eth1 | eth2 | eth3 | eth4 | eth5 | wifi0 > <mac>"
|
||||
echo "example: setmac eth0 00:11:22:33:44:55"
|
||||
}
|
||||
|
||||
|
||||
get_eth0_mac_from_base()
|
||||
{
|
||||
h=$(echo 0x`echo $baseadr|tr -d ':'`)
|
||||
eth0adr=`printf "%012X\n" $((h+1)) | sed 's/[0-9A-F][0-9A-F]\B/&:/g'`
|
||||
}
|
||||
|
||||
get_eth0_mac_from_art()
|
||||
{
|
||||
eth0adr="`${GETMAC} eth0`"
|
||||
}
|
||||
|
||||
get_eth1_mac_from_art()
|
||||
{
|
||||
eth1adr="`${GETMAC} eth1`"
|
||||
}
|
||||
|
||||
get_eth2_mac_from_art()
|
||||
{
|
||||
eth2adr="`${GETMAC} eth2`"
|
||||
}
|
||||
|
||||
get_eth3_mac_from_art()
|
||||
{
|
||||
eth3adr="`${GETMAC} eth3`"
|
||||
}
|
||||
|
||||
get_eth4_mac_from_art()
|
||||
{
|
||||
eth4adr="`${GETMAC} eth4`"
|
||||
}
|
||||
|
||||
get_eth5_mac_from_art()
|
||||
{
|
||||
eth5adr="`${GETMAC} eth5`"
|
||||
}
|
||||
|
||||
set_mac()
|
||||
{
|
||||
for NUM in 0 1 2 3 4 5;do
|
||||
#A="`eval echo '${eth'$NUM'adr}' | awk -F ':' '{print $1}'`"
|
||||
A="`eval echo '${eth'$NUM'adr:0:2}'`"
|
||||
B="`eval echo '${eth'$NUM'adr:3:2}'`"
|
||||
C="`eval echo '${eth'$NUM'adr:6:2}'`"
|
||||
D="`eval echo '${eth'$NUM'adr:9:2}'`"
|
||||
E="`eval echo '${eth'$NUM'adr:12:2}'`"
|
||||
F="`eval echo '${eth'$NUM'adr:15:2}'`"
|
||||
str="${str}\x$A\x$B\x$C\x$D\x$E\x$F"
|
||||
done
|
||||
|
||||
# pad 0xff to /tmp/macaddr
|
||||
for i in `seq 25 64`; do
|
||||
str="${str}\xff"
|
||||
done
|
||||
|
||||
# echo "@@ str=$str"
|
||||
|
||||
echo -n -e ${str} > /tmp/macaddr
|
||||
# hexdump -C /tmp/macaddr
|
||||
|
||||
art_partition=$(find_mtd_part $art_mtd)
|
||||
if [ -z "$art_partition" ]; then
|
||||
art_partition=$(find_mmc_part $art_mtd)
|
||||
fi
|
||||
|
||||
# Find the partition and set the MAC addresses in the flash
|
||||
dd if=/tmp/macaddr of=$art_partition bs=64 conv=sync 2>/dev/null
|
||||
rm -f /tmp/macaddr
|
||||
}
|
||||
|
||||
setmac_wifi() {
|
||||
. /lib/functions.sh;
|
||||
|
||||
#wifi0,偏移１4,写６个，wifi1偏移２０，写６个，checksum:10,2byte，wifi2同d01
|
||||
case $1 in
|
||||
wifi0) artoff=$((0x1000)); wl1_mac=$(macaddr_sub $2 1);;
|
||||
*) return;;
|
||||
esac;
|
||||
artdev=$(find_mtd_part 0:art)
|
||||
if [ -z "$artdev" ]; then
|
||||
artdev=$(find_mmc_part "0:art")
|
||||
fi;
|
||||
|
||||
backcsum=0
|
||||
i=0
|
||||
for data in ` hexdump -v -e '/2 "%02X\n"' -n $((0x100)) -s $artoff -v $artdev`
|
||||
do
|
||||
backcsum=$((backcsum^0x$data))
|
||||
done
|
||||
backcsum=$((backcsum^0xffff))
|
||||
|
||||
str='';
|
||||
for octet in $(echo $2 | sed 's/:/ /g'); do
|
||||
str="$str\x$octet";
|
||||
done;
|
||||
for octet in $(echo $wl1_mac | sed 's/:/ /g'); do
|
||||
str="$str\x$octet";
|
||||
done;
|
||||
case $1 in
|
||||
wifi0)
|
||||
echo -n -e "$str" | dd of=$artdev bs=1 seek=$((artoff+14)) conv=notrunc 2>/dev/null
|
||||
#set nvMacflag to set wifi mac
|
||||
echo -n -e "\x01\x00" | dd of=$artdev bs=1 seek=$((artoff+0x3e)) conv=notrunc 2>/dev/null
|
||||
;;
|
||||
*) return;;
|
||||
esac;
|
||||
#csum=$(csum=0; u16=0; hexdump -e '1/2 "%u\n"' -n $((0x20000)) -s $artoff -v $artdev | while read line; do [ $((u16++)) -eq 5 ] && line=$((0xffff)); csum=$((csum^line)); [ $u16 -eq $((0x20000/2)) ] && printf '%x\n' $csum; done);
|
||||
csum=0
|
||||
i=0
|
||||
case $1 in
|
||||
wifi0) csum_pos=10;;
|
||||
*) return;;
|
||||
esac;
|
||||
|
||||
for data in ` hexdump -v -e '/2 "%02X\n"' -n $((0x100)) -s $artoff -v $artdev`
|
||||
do
|
||||
if [ $i = $csum_pos ];then
|
||||
csum=$((csum^0xffff))
|
||||
else
|
||||
csum=$((csum^0x$data))
|
||||
fi
|
||||
i=$((i+2))
|
||||
done
|
||||
csum=$((csum^$backcsum))
|
||||
#printf 'write: %x\n' $csum
|
||||
case $1 in
|
||||
wifi0|wifi1) echo -ne $(printf '\x%x\x%x' $(($csum&0xff)) $((($csum&0xff00)>>8))) | dd of=$artdev bs=1 seek=$((artoff+10)) conv=notrunc 2>/dev/null;;
|
||||
*) return;;
|
||||
esac;
|
||||
uci -q commit wireless;
|
||||
}
|
||||
|
||||
[ ! $# -eq 2 ] && usage && exit 0
|
||||
|
||||
case $1 in
|
||||
eth0)
|
||||
eth0adr=$2
|
||||
get_eth1_mac_from_art
|
||||
get_eth2_mac_from_art
|
||||
get_eth3_mac_from_art
|
||||
get_eth4_mac_from_art
|
||||
get_eth5_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
eth1)
|
||||
eth1adr=$2
|
||||
get_eth0_mac_from_art
|
||||
get_eth2_mac_from_art
|
||||
get_eth3_mac_from_art
|
||||
get_eth4_mac_from_art
|
||||
get_eth5_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
eth2)
|
||||
eth2adr=$2
|
||||
get_eth0_mac_from_art
|
||||
get_eth1_mac_from_art
|
||||
get_eth3_mac_from_art
|
||||
get_eth4_mac_from_art
|
||||
get_eth5_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
eth3)
|
||||
eth3adr=$2
|
||||
get_eth0_mac_from_art
|
||||
get_eth1_mac_from_art
|
||||
get_eth2_mac_from_art
|
||||
get_eth4_mac_from_art
|
||||
get_eth5_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
eth4)
|
||||
eth4adr=$2
|
||||
get_eth0_mac_from_art
|
||||
get_eth1_mac_from_art
|
||||
get_eth2_mac_from_art
|
||||
get_eth3_mac_from_art
|
||||
get_eth5_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
eth5)
|
||||
eth5adr=$2
|
||||
get_eth0_mac_from_art
|
||||
get_eth1_mac_from_art
|
||||
get_eth2_mac_from_art
|
||||
get_eth3_mac_from_art
|
||||
get_eth4_mac_from_art
|
||||
set_mac
|
||||
;;
|
||||
wifi0)
|
||||
setmac_wifi wifi0 "$2"
|
||||
;;
|
||||
*)
|
||||
usage
|
||||
;;
|
||||
esac
|
||||
|
||||
26
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/setmac_all
Executable file
26
6.6/target/linux/qualcommax/ipq807x/base-files/sbin/setmac_all
Executable file
|
|
@ -0,0 +1,26 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
|
||||
usage() {
|
||||
echo "setmac_all <mac>, the mac is wan mac"
|
||||
echo "example: setmac_all 00:11:22:33:44:55"
|
||||
}
|
||||
|
||||
[ ! $# -eq 1 ] && usage && exit 0
|
||||
|
||||
eth1mac=$(macaddr_add $1 1)
|
||||
eth2mac=$(macaddr_add $1 2)
|
||||
eth3mac=$(macaddr_add $1 3)
|
||||
eth4mac=$(macaddr_add $1 4)
|
||||
eth5mac=$(macaddr_add $1 5)
|
||||
wl0mac=$(macaddr_add $1 6)
|
||||
setmac eth1 $eth1mac
|
||||
setmac eth2 $eth2mac
|
||||
setmac eth3 $eth3mac
|
||||
setmac eth4 $eth4mac
|
||||
setmac eth5 $eth5mac
|
||||
setmac eth0 $1
|
||||
setmac wifi0 $wl0mac
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
diff -uprN a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
|
||||
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi 2023-06-22 18:11:32.910676000 -0700
|
||||
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi 2023-07-26 21:43:58.269612521 -0700
|
||||
@@ -750,6 +750,21 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
+ blsp1_i2c4: i2c@78b8000 {
|
||||
+ compatible = "qcom,i2c-qup-v2.2.1";
|
||||
+ #address-cells = <1>;
|
||||
+ #size-cells = <0>;
|
||||
+ reg = <0x078b8000 0x600>;
|
||||
+ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ clocks = <&gcc GCC_BLSP1_QUP4_I2C_APPS_CLK>,
|
||||
+ <&gcc GCC_BLSP1_AHB_CLK>;
|
||||
+ clock-names = "core", "iface";
|
||||
+ clock-frequency = <100000>;
|
||||
+ dmas = <&blsp_dma 18>, <&blsp_dma 19>;
|
||||
+ dma-names = "tx", "rx";
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
+
|
||||
blsp1_i2c5: i2c@78b9000 {
|
||||
compatible = "qcom,i2c-qup-v2.2.1";
|
||||
#address-cells = <1>;
|
||||
Loading…
Add table
Add a link
Reference in a new issue