mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-03-09 15:40:20 +00:00
Code Issues Releases Wiki Activity

1

Browse source
This commit is contained in:
suyuan 2020-12-24 22:51:25 +08:00
parent 3e62e515c8
commit d4a61a414a
75 changed files with 0 additions and 9855 deletions
Download patch file Download diff file Expand all files Collapse all files

512
root/package/base-files/files/bin/config_generate
View file

@ -1,512 +0,0 @@
#!/bin/sh
CFG=/etc/board.json
. /usr/share/libubox/jshn.sh
[ -s $CFG ] || /bin/board_detect || exit 1
[ -s /etc/config/network -a -s /etc/config/system ] && exit 0
generate_bridge() {
local name=$1
local macaddr=$2
uci -q batch <<-EOF
set network.$name=device
set network.$name.name=$name
set network.$name.type=bridge
EOF
if [ -n "$macaddr" ]; then
uci -q batch <<-EOF
set network.$name.macaddr=$macaddr
EOF
fi
}
bridge_vlan_id=0
generate_bridge_vlan() {
local name=$1_vlan
local device=$2
local ports="$3"
local vlan="$4"
uci -q batch <<-EOF
set network.$name=bridge-vlan
set network.$name.device='$device'
set network.$name.vlan='$vlan'
set network.$name.ports='$ports'
EOF
}
generate_static_network() {
uci -q batch <<-EOF
delete network.loopback
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.globals
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
if json_is_a dsl object; then
json_select dsl
if json_is_a atmbridge object; then
json_select atmbridge
local vpi vci encaps payload nameprefix
json_get_vars vpi vci encaps payload nameprefix
uci -q batch <<-EOF
delete network.atm
set network.atm='atm-bridge'
set network.atm.vpi='$vpi'
set network.atm.vci='$vci'
set network.atm.encaps='$encaps'
set network.atm.payload='$payload'
set network.atm.nameprefix='$nameprefix'
EOF
json_select ..
fi
if json_is_a modem object; then
json_select modem
local type annex firmware tone xfer_mode
json_get_vars type annex firmware tone xfer_mode
uci -q batch <<-EOF
delete network.dsl
set network.dsl='dsl'
set network.dsl.annex='$annex'
set network.dsl.firmware='$firmware'
set network.dsl.tone='$tone'
set network.dsl.xfer_mode='$xfer_mode'
EOF
json_select ..
fi
json_select ..
fi
}
addr_offset=2
generate_network() {
local ifname macaddr protocol type ipaddr netmask vlan
local bridge=$2
json_select network
json_select "$1"
json_get_vars ifname macaddr protocol ipaddr netmask vlan
json_select ..
json_select ..
[ -n "$ifname" ] || return
# force bridge for multi-interface devices (and lan)
case "$1:$ifname" in
*\ * | lan:*) type="bridge" ;;
esac
[ -n "$bridge" ] && {
if [ -z "$vlan" ]; then
bridge_vlan_id=$((bridge_vlan_id + 1))
vlan=$bridge_vlan_id
fi
generate_bridge_vlan $1 $bridge "$ifname" $vlan
ifname=$bridge.$vlan
type=""
}
uci -q batch <<-EOF
delete network.$1
set network.$1='interface'
set network.$1.type='$type'
set network.$1.ifname='$ifname'
set network.$1.proto='none'
EOF
if [ -n "$macaddr" ]; then
for name in $ifname; do
uci -q batch <<-EOF
delete network.$1_${name/./_}_dev
set network.$1_${name/./_}_dev='device'
set network.$1_${name/./_}_dev.name='$name'
set network.$1_${name/./_}_dev.macaddr='$macaddr'
EOF
done
fi
case "$protocol" in
static)
local ipad
case "$1" in
lan) ipad=${ipaddr:-"192.168.100.1"} ;;
*) ipad=${ipaddr:-"192.168.$((addr_offset++)).1"} ;;
esac
netm=${netmask:-"255.255.255.0"}
uci -q batch <<-EOF
set network.$1.proto='static'
set network.$1.ipaddr='$ipad'
set network.$1.netmask='$netm'
EOF
[ -e /proc/sys/net/ipv6 ] && uci set network.$1.ip6assign='60'
;;
dhcp)
# fixup IPv6 slave interface if parent is a bridge
[ "$type" = "bridge" ] && ifname="br-$1"
uci set network.$1.proto='dhcp'
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='$ifname'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
pppoe)
uci -q batch <<-EOF
set network.$1.proto='pppoe'
set network.$1.username='username'
set network.$1.password='password'
EOF
[ -e /proc/sys/net/ipv6 ] && {
uci -q batch <<-EOF
set network.$1.ipv6='1'
delete network.${1}6
set network.${1}6='interface'
set network.${1}6.ifname='@${1}'
set network.${1}6.proto='dhcpv6'
EOF
}
;;
esac
}
generate_switch_vlans_ports() {
local switch="$1"
local port ports role roles num attr val
#
# autogenerate vlans
#
if json_is_a roles array; then
json_get_keys roles roles
json_select roles
for role in $roles; do
json_select "$role"
json_get_vars ports
json_select ..
uci -q batch <<-EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$switch'
set network.@switch_vlan[-1].vlan='$role'
set network.@switch_vlan[-1].ports='$ports'
EOF
done
json_select ..
fi
#
# write port specific settings
#
if json_is_a ports array; then
json_get_keys ports ports
json_select ports
for port in $ports; do
json_select "$port"
json_get_vars num
if json_is_a attr object; then
json_get_keys attr attr
json_select attr
uci -q batch <<-EOF
add network switch_port
set network.@switch_port[-1].device='$switch'
set network.@switch_port[-1].port=$num
EOF
for attr in $attr; do
json_get_var val "$attr"
uci -q set network.@switch_port[-1].$attr="$val"
done
json_select ..
fi
json_select ..
done
json_select ..
fi
}
generate_switch() {
local key="$1"
local vlans
json_select switch
json_select "$key"
json_get_vars enable reset blinkrate cpu_port \
ar8xxx_mib_type ar8xxx_mib_poll_interval
uci -q batch <<-EOF
add network switch
set network.@switch[-1].name='$key'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
set network.@switch[-1].blinkrate='$blinkrate'
set network.@switch[-1].ar8xxx_mib_type='$ar8xxx_mib_type'
set network.@switch[-1].ar8xxx_mib_poll_interval='$ar8xxx_mib_poll_interval'
EOF
generate_switch_vlans_ports "$1"
json_select ..
json_select ..
}
generate_static_system() {
uci -q batch <<-EOF
delete system.@system[0]
add system system
set system.@system[-1].hostname='openmptcprouter'
set system.@system[-1].timezone='UTC'
set system.@system[-1].ttylogin='0'
set system.@system[-1].log_size='64'
set system.@system[-1].urandom_seed='0'
delete system.ntp
set system.ntp='timeserver'
set system.ntp.enabled='1'
set system.ntp.enable_server='0'
add_list system.ntp.server='ntp1.aliyun.com'
add_list system.ntp.server='time1.cloud.tencent.com'
add_list system.ntp.server='time.ustc.edu.cn'
add_list system.ntp.server='cn.pool.ntp.org'
EOF
if json_is_a system object; then
json_select system
local hostname
if json_get_var hostname hostname; then
uci -q set "system.@system[-1].hostname=$hostname"
fi
local compat_version
if json_get_var compat_version compat_version; then
uci -q set "system.@system[-1].compat_version=$compat_version"
else
uci -q set "system.@system[-1].compat_version=1.0"
fi
if json_is_a ntpserver array; then
local keys key
json_get_keys keys ntpserver
json_select ntpserver
uci -q delete "system.ntp.server"
for key in $keys; do
local server
if json_get_var server "$key"; then
uci -q add_list "system.ntp.server=$server"
fi
done
json_select ..
fi
json_select ..
fi
}
generate_rssimon() {
local key="$1"
local cfg="rssid_$key"
local refresh threshold
json_select rssimon
json_select "$key"
json_get_vars refresh threshold
json_select ..
json_select ..
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='rssid'
set system.$cfg.dev='$key'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
}
generate_led() {
local key="$1"
local cfg="led_$key"
json_select led
json_select "$key"
json_get_vars name sysfs type trigger default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.default='$default'
EOF
case "$type" in
gpio)
local gpio inverted
json_get_vars gpio inverted
uci -q batch <<-EOF
set system.$cfg.trigger='gpio'
set system.$cfg.gpio='$gpio'
set system.$cfg.inverted='$inverted'
EOF
;;
netdev)
local device mode
json_get_vars device mode
uci -q batch <<-EOF
set system.$cfg.trigger='netdev'
set system.$cfg.mode='$mode'
set system.$cfg.dev='$device'
EOF
;;
usb)
local device
json_get_vars device
uci -q batch <<-EOF
set system.$cfg.trigger='usbdev'
set system.$cfg.interval='50'
set system.$cfg.dev='$device'
EOF
;;
usbport)
local ports port
json_get_values ports ports
uci set system.$cfg.trigger='usbport'
for port in $ports; do
uci add_list system.$cfg.port=$port
done
;;
rssi)
local iface minq maxq offset factor
json_get_vars iface minq maxq offset factor
uci -q batch <<-EOF
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
;;
switch)
local port_mask speed_mask mode
json_get_vars port_mask speed_mask mode
uci -q batch <<-EOF
set system.$cfg.port_mask='$port_mask'
set system.$cfg.speed_mask='$speed_mask'
set system.$cfg.mode='$mode'
EOF
;;
portstate)
local port_state
json_get_vars port_state
uci -q batch <<-EOF
set system.$cfg.port_state='$port_state'
EOF
;;
timer|oneshot)
local delayon delayoff
json_get_vars delayon delayoff
uci -q batch <<-EOF
set system.$cfg.trigger='$type'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
;;
esac
json_select ..
json_select ..
}
generate_gpioswitch() {
local cfg="$1"
json_select gpioswitch
json_select "$cfg"
local name pin default
json_get_vars name pin default
uci -q batch <<-EOF
delete system.$cfg
set system.$cfg='gpio_switch'
set system.$cfg.name='$name'
set system.$cfg.gpio_pin='$pin'
set system.$cfg.value='$default'
EOF
json_select ..
json_select ..
}
json_init
json_load "$(cat ${CFG})"
umask 077
if [ ! -s /etc/config/network ]; then
bridge_name=""
touch /etc/config/network
generate_static_network
json_get_vars bridge
[ -n "$bridge" ] && {
json_select bridge
json_get_vars name macaddr
generate_bridge "$name" "$macaddr"
json_select ..
bridge_name=$name
}
json_get_keys keys network
for key in $keys; do generate_network $key $bridge_name; done
json_get_keys keys switch
for key in $keys; do generate_switch $key; done
fi
if [ ! -s /etc/config/system ]; then
touch /etc/config/system
generate_static_system
json_get_keys keys rssimon
for key in $keys; do generate_rssimon $key; done
json_get_keys keys gpioswitch
for key in $keys; do generate_gpioswitch $key; done
json_get_keys keys led
for key in $keys; do generate_led $key; done
fi
uci commit

39
root/package/base-files/files/etc/banner
View file

@ -1,39 +0,0 @@
/***
* ,s555SB@@&
* :9H####@@@@@Xi
* 1@@@@@@@@@@@@@@8
* ,8@@@@@@@@@B@@@@@@8
* :B@@@@X3hi8Bs;B@@@@@Ah,
* ,8i r@@@B: 1S ,M@@@@@@#8;
* 1AB35.i: X@@8 . SGhr ,A@@@@@@@@S
* 1@h31MX8 18Hhh3i .i3r ,A@@@@@@@@@5
* ;@&i,58r5 rGSS: :B@@@@@@@@@@A
* 1#i . 9i hX. .: .5@@@@@@@@@@@1
* sG1, ,G53s. 9#Xi;hS5 3B@@@@@@@B1
* .h8h.,A@@@MXSs, #@H1: 3ssSSX@1
* s ,@@@@@@@@@@@@Xhi, r#@@X1s9M8 .GA981
* ,. rS8H#@@@@@@@@@@#HG51;. .h31i;9@r .8@@@@BS;i;
* .19AXXXAB@@@@@@@@@@@@@@#MHXG893hrX#XGGXM@@@@@@@@@@MS
* s@@MM@@@hsX#@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@&,
* :GB@#3G@@Brs ,1GM@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@B,
* .hM@@@#@@#MX 51 r;iSGAM@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@8
* :3B@@@@@@@@@@@&9@h :Gs .;sSXH@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@:
* s&HA#@@@@@@@@@@@@@@M89A;.8S. ,r3@@@@@@@@@@@@@@@@@@@@@@@@@@@r
* ,13B@@@@@@@@@@@@@@@@@@@5 5B3 ;. ;@@@@@@@@@@@@@@@@@@@@@@@@@@@i
* 5#@@#&@@@@@@@@@@@@@@@@@@9 .39: ;@@@@@@@@@@@@@@@@@@@@@@@@@@@;
* 9@@@X:MM@@@@@@@@@@@@@@@#; ;31. H@@@@@@@@@@@@@@@@@@@@@@@@@@:
* SH#@B9.rM@@@@@@@@@@@@@B :. 3@@@@@@@@@@@@@@@@@@@@@@@@@@5
* ,:. 9@@@@@@@@@@@#HB5 .M@@@@@@@@@@@@@@@@@@@@@@@@@B
* ,ssirhSM@&1;i19911i,. s@@@@@@@@@@@@@@@@@@@@@@@@@@S
* ,,,rHAri1h1rh&@#353Sh: 8@@@@@@@@@@@@@@@@@@@@@@@@@#:
* .A3hH@#5S553&@@#h i:i9S #@@@@@@@@@@@@@@@@@@@@@@@@@A.
*
*
* 又看源码，看你妹妹呀！
*/
------------------------------------------------------------------------------
55860.com QQ 175338181 weixin:xinyangla
(%C)
------------------------------------------------------------------------------

17
root/package/base-files/files/etc/board.d/99-default_network
View file

@ -1,17 +0,0 @@
#!/bin/sh
#
# Copyright (C) 2013-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
json_is_a network object && exit 0
ucidef_set_interface_lan 'eth0'
[ -d /sys/class/net/eth1 ] && ucidef_set_interface_wan 'eth1'
board_config_flush
exit 0

5
root/package/base-files/files/etc/shadow
View file

@ -1,5 +0,0 @@
root:$1$ie.8vTnt$7EzhI1ZYiwp8hSAC4eSId0:18473:0:99999:7:::
daemon:*:0:0:99999:7:::
ftp:*:0:0:99999:7:::
network:*:0:0:99999:7:::
nobody:*:0:0:99999:7:::

135
root/package/firmware/ipq-wifi/Makefile
View file

@ -1,135 +0,0 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/version.mk
PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
define Build/Prepare
mkdir -p $(PKG_BUILD_DIR)
endef
define Build/Compile
endef
# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
# to generate the board-* files here.
#
# This is intended to be used on an interim basis until device-specific
# board data for new devices is available through the upstream compilation
#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:= \
8dev_habanero-dvk \
aruba_ap-303 \
avm_fritzrepeater-1200 \
buffalo_wtr-m2133hp \
cellc_rtl30vw \
devolo_magic-2-wifi-next \
dlink_dap2610 \
edgecore_ecw5410 \
edgecore_oap100 \
engenius_eap2200 \
engenius_emd1 \
engenius_emr3500 \
ezviz_cs-w3-wd1200g-eup \
glinet_gl-s1300 \
linksys_ea8300 \
linksys_mr8300-v0 \
luma_wrtq-329acn \
pangu_l1000 \
p2w_r619ac \
mobipromo_cm520-79f \
plasmacloud_pa1200 \
plasmacloud_pa2200 \
qxwlan_e2600ac
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
TITLE:=Custom Board
endef
define ipq-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
endef
define ipq-wifi-install-one
$(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
$(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
$(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
)))
endef
# Blank line required at end of above define due to foreach context
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
The $(2) requires board-specific, reference ("cal") data
that is not yet present in the upstream wireless firmware distribution.
This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.
This is package is only necessary for the $(2).
Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
$$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
$$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
# Add board name to ALLWIFIBOARDS
# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(eval $(call generate-ipq-wifi-package,pangu_l1000,PANGU L1000))
$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))

BIN
root/package/firmware/ipq-wifi/board-p2w_r619ac.qca4019
View file

Binary file not shown.

BIN
root/package/firmware/ipq-wifi/board-pangu_l1000.qca4019
View file

Binary file not shown.

24
root/package/firmware/wireless-regdb/patches/501-CN-regd.patch
View file

@ -1,24 +0,0 @@
diff -uprN a/db.txt b/db.txt
--- a/db.txt 2020-01-06 19:33:27.707188000 +0800
+++ b/db.txt 2020-01-06 19:39:28.663199594 +0800
@@ -291,15 +291,15 @@ country CL: DFS-JP
(5735 - 5835 @ 80), (20)
country CN: DFS-FCC
- (2402 - 2482 @ 40), (20)
- (5170 - 5250 @ 80), (23), AUTO-BW
- (5250 - 5330 @ 80), (23), DFS, AUTO-BW
+ (2402 - 2482 @ 40), (30)
+ (5170 - 5250 @ 80), (30), AUTO-BW
+ (5250 - 5330 @ 80), (30), DFS, AUTO-BW
(5735 - 5835 @ 80), (30)
# 60 GHz band channels 1,4: 28dBm, channels 2,3: 44dBm
# ref: http://www.miit.gov.cn/n11293472/n11505629/n11506593/n11960250/n11960606/n11960700/n12330791.files/n12330790.pdf
- (57240 - 59400 @ 2160), (28)
+ (57240 - 59400 @ 2160), (30)
(59400 - 63720 @ 2160), (44)
- (63720 - 65880 @ 2160), (28)
+ (63720 - 65880 @ 2160), (30)
country CO: DFS-FCC
(2402 - 2482 @ 40), (20)

127
root/package/kernel/mac80211/files/lib/wifi/mac80211.sh
View file

@ -1,127 +0,0 @@
#!/bin/sh
. /lib/netifd/mac80211.sh
append DRIVERS "mac80211"
lookup_phy() {
[ -n "$phy" ] && {
[ -d /sys/class/ieee80211/$phy ] && return
}
local devpath
config_get devpath "$device" path
[ -n "$devpath" ] && {
phy="$(mac80211_path_to_phy "$devpath")"
[ -n "$phy" ] && return
}
local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
[ -n "$macaddr" ] && {
for _phy in /sys/class/ieee80211/*; do
[ -e "$_phy" ] || continue
[ "$macaddr" = "$(cat ${_phy}/macaddress)" ] || continue
phy="${_phy##*/}"
return
done
}
phy=
return
}
find_mac80211_phy() {
local device="$1"
config_get phy "$device" phy
lookup_phy
[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
echo "PHY for wifi device $1 not found"
return 1
}
config_set "$device" phy "$phy"
config_get macaddr "$device" macaddr
[ -z "$macaddr" ] && {
config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
}
return 0
}
check_mac80211_device() {
config_get phy "$1" phy
[ -z "$phy" ] && {
find_mac80211_phy "$1" >/dev/null || return 0
config_get phy "$1" phy
}
[ "$phy" = "$dev" ] && found=1
}
detect_mac80211() {
devidx=0
config_load wireless
while :; do
config_get type "radio$devidx" type
[ -n "$type" ] || break
devidx=$(($devidx + 1))
done
for _dev in /sys/class/ieee80211/*; do
[ -e "$_dev" ] || continue
dev="${_dev##*/}"
found=0
config_foreach check_mac80211_device wifi-device
[ "$found" -gt 0 ] && continue
mode_band="g"
channel="13"
htmode=""
ht_capab=""
iw phy "$dev" info | grep -q 'Capabilities:' && htmode=HT40
iw phy "$dev" info | grep -q '\* 5... MHz \[' && {
mode_band="a"
channel=$(iw phy "$dev" info | grep '\* 5... MHz \[' | grep '(disabled)' -v -m 1 | sed 's/[^[]*\[\|\].*//g')
iw phy "$dev" info | grep -q 'VHT Capabilities' && htmode="VHT80"
}
[ -n "$htmode" ] && ht_capab="set wireless.radio${devidx}.htmode=$htmode"
path="$(mac80211_phy_to_path "$dev")"
if [ -n "$path" ]; then
dev_id="set wireless.radio${devidx}.path='$path'"
else
dev_id="set wireless.radio${devidx}.macaddr=$(cat /sys/class/ieee80211/${dev}/macaddress)"
fi
if [ x$mode_band == x"a" ]; then
ssid_5ghz="-5G"
else
ssid_5ghz="-2.4G"
fi
uci -q batch <<-EOF
set wireless.radio${devidx}=wifi-device
set wireless.radio${devidx}.type=mac80211
set wireless.radio${devidx}.channel=${channel}
set wireless.radio${devidx}.hwmode=11${mode_band}
set wireless.radio${devidx}.txpower=22
set wireless.radio${devidx}.country=CN
${dev_id}
${ht_capab}
set wireless.radio${devidx}.disabled=0
set wireless.default_radio${devidx}=wifi-iface
set wireless.default_radio${devidx}.device=radio${devidx}
set wireless.default_radio${devidx}.network=lan
set wireless.default_radio${devidx}.mode=ap
set wireless.default_radio${devidx}.ssid=OpenWrt${ssid_5ghz}-$(cat /sys/class/ieee80211/${dev}/macaddress | awk -F ":" '{print $4""$5""$6 }'| tr a-z A-Z)
set wireless.default_radio${devidx}.encryption=none
EOF
uci -q commit wireless
devidx=$(($devidx + 1))
done
}

40
root/package/network/config/firewall/patches/fullconenat.patch
View file

@ -1,40 +0,0 @@
--- a/options.h
+++ b/options.h
@@ -341,6 +341,8 @@ struct fw3_zone
struct list_head masq_src;
struct list_head masq_dest;
+ bool fullcone;
+
bool mtu_fix;
struct list_head cthelpers;
--- a/zones.c
+++ b/zones.c
@@ -77,6 +77,8 @@ const struct fw3_option fw3_zone_opts[]
FW3_LIST("masq_src", network, zone, masq_src),
FW3_LIST("masq_dest", network, zone, masq_dest),
+ FW3_OPT("fullcone", bool, zone, fullcone),
+
FW3_OPT("extra", string, zone, extra_src),
FW3_OPT("extra_src", string, zone, extra_src),
FW3_OPT("extra_dest", string, zone, extra_dest),
@@ -709,7 +711,16 @@ print_zone_rule(struct fw3_ipt_handle *h
(mdest = next_addr(mdest, &zone->masq_dest,
handle->family, false)) || first_dest;
first_dest = false)
- {
+ if (zone->fullcone && (access("/usr/lib/iptables/libipt_FULLCONENAT.so", 0) == 0)) {
+ r = fw3_ipt_rule_new(handle);
+ fw3_ipt_rule_src_dest(r, msrc, mdest);
+ fw3_ipt_rule_target(r, "FULLCONENAT");
+ fw3_ipt_rule_append(r, "zone_%s_postrouting", zone->name);
+ r = fw3_ipt_rule_new(handle);
+ fw3_ipt_rule_src_dest(r, msrc, mdest);
+ fw3_ipt_rule_target(r, "FULLCONENAT");
+ fw3_ipt_rule_append(r, "zone_%s_prerouting", zone->name);
+ } else {
r = fw3_ipt_rule_new(handle);
fw3_ipt_rule_src_dest(r, msrc, mdest);
fw3_ipt_rule_target(r, "MASQUERADE");

45
root/package/network/ipv6/6in4/Makefile
View file

@ -1,45 +0,0 @@
#
# Copyright (C) 2010-2015 OpenWrt.org
# Copyright (C) 2018-2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
# - Added gateway setting
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=6in4
PKG_VERSION:=270
PKG_RELEASE:=2
PKG_LICENSE:=GPL-2.0
include $(INCLUDE_DIR)/package.mk
define Package/6in4
SECTION:=net
CATEGORY:=Network
DEPENDS:=@IPV6 +kmod-sit +uclient-fetch
TITLE:=IPv6-in-IPv4 configuration support
MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
PKGARCH:=all
endef
define Package/6in4/description
Provides support for 6in4 tunnels in /etc/config/network.
Refer to http://wiki.openwrt.org/doc/uci/network for
configuration details.
endef
define Build/Compile
endef
define Build/Configure
endef
define Package/6in4/install
$(INSTALL_DIR) $(1)/lib/netifd/proto
$(INSTALL_BIN) ./files/6in4.sh $(1)/lib/netifd/proto/6in4.sh
endef
$(eval $(call BuildPackage,6in4))

149
root/package/network/ipv6/6in4/files/6in4.sh
View file

@ -1,149 +0,0 @@
#!/bin/sh
# 6in4.sh - IPv6-in-IPv4 tunnel backend
# Copyright (c) 2010-2015 OpenWrt.org
[ -n "$INCLUDE_ONLY" ] || {
. /lib/functions.sh
. /lib/functions/network.sh
. ../netifd-proto.sh
init_proto "$@"
}
proto_6in4_update() {
sh -c '
timeout=5
(while [ $((timeout--)) -gt 0 ]; do
sleep 1
kill -0 $$ || exit 0
done; kill -9 $$) 2>/dev/null &
exec "$@"
' "$1" "$@"
}
proto_6in4_add_prefix() {
append "$3" "$1"
}
proto_6in4_setup() {
local cfg="$1"
local iface="$2"
local link="6in4-$cfg"
local mtu ttl tos ipaddr peeraddr ip6addr ip6prefix ip6prefixes tunlink tunnelid username password updatekey gateway
json_get_vars mtu ttl tos ipaddr peeraddr ip6addr tunlink tunnelid username password updatekey gateway
json_for_each_item proto_6in4_add_prefix ip6prefix ip6prefixes
[ -z "$peeraddr" ] && {
proto_notify_error "$cfg" "MISSING_ADDRESS"
proto_block_restart "$cfg"
return
}
[ -n "$tunlink" ] && ( proto_add_host_dependency "$cfg" "$peeraddr" "$tunlink" )
[ -z "$ipaddr" ] && {
local wanif="$tunlink"
if [ -z "$wanif" ] && ! network_find_wan wanif; then
proto_notify_error "$cfg" "NO_WAN_LINK"
return
fi
if ! network_get_ipaddr ipaddr "$wanif"; then
proto_notify_error "$cfg" "NO_WAN_LINK"
return
fi
}
proto_init_update "$link" 1
[ -n "$ip6addr" ] && {
local local6="${ip6addr%%/*}"
local mask6="${ip6addr##*/}"
[[ "$local6" = "$mask6" ]] && mask6=
proto_add_ipv6_address "$local6" "$mask6"
proto_add_ipv6_route "::" 0 "" "" "" "$local6/$mask6"
}
[ -n "$gateway" ] && {
proto_add_ipv6_route "::" 0 "$gateway"
}
for ip6prefix in $ip6prefixes; do
proto_add_ipv6_prefix "$ip6prefix"
proto_add_ipv6_route "::" 0 "" "" "" "$ip6prefix"
done
proto_add_tunnel
json_add_string mode sit
json_add_int mtu "${mtu:-1280}"
json_add_int ttl "${ttl:-64}"
[ -n "$tos" ] && json_add_string tos "$tos"
json_add_string local "$ipaddr"
json_add_string remote "$peeraddr"
[ -n "$tunlink" ] && json_add_string link "$tunlink"
proto_close_tunnel
proto_send_update "$cfg"
[ -n "$tunnelid" -a -n "$username" -a \( -n "$password" -o -n "$updatekey" \) ] && {
[ -n "$updatekey" ] && password="$updatekey"
local http="http"
local urlget="uclient-fetch"
local urlget_opts="-qO-"
local ca_path="${SSL_CERT_DIR:-/etc/ssl/certs}"
[ -f /lib/libustream-ssl.so ] && http=https
[ "$http" = "https" -a -z "$(find $ca_path -name "*.0" 2>/dev/null)" ] && {
urlget_opts="$urlget_opts --no-check-certificate"
}
local url="$http://ipv4.tunnelbroker.net/nic/update?hostname=$tunnelid"
local try=0
local max=3
(
set -o pipefail
while [ $((++try)) -le $max ]; do
if proto_6in4_update $urlget $urlget_opts --user="$username" --password="$password" "$url" 2>&1 | \
sed -e 's,^Killed$,timeout,' -e "s,^,update $try/$max: ," | \
logger -t "$link";
then
logger -t "$link" "updated"
return 0
fi
sleep 5
done
logger -t "$link" "update failed"
)
}
}
proto_6in4_teardown() {
local cfg="$1"
}
proto_6in4_init_config() {
no_device=1
available=1
proto_config_add_string "ipaddr"
proto_config_add_string "ip6addr"
proto_config_add_array "ip6prefix"
proto_config_add_string "peeraddr"
proto_config_add_string "tunlink"
proto_config_add_string "tunnelid"
proto_config_add_string "username"
proto_config_add_string "password"
proto_config_add_string "updatekey"
proto_config_add_string "gateway"
proto_config_add_int "mtu"
proto_config_add_int "ttl"
proto_config_add_string "tos"
}
[ -n "$INCLUDE_ONLY" ] || {
add_protocol 6in4
}

1134
root/package/network/services/dnsmasq/files/dnsmasq.init
View file

File diff suppressed because it is too large Load diff

84
root/package/network/utils/iperf3/Makefile
View file

@ -1,84 +0,0 @@
#
# Copyright (C) 2007-2010 OpenWrt.org
# Copyright (C) 2019 Ycarus (Yannick Chabanois) <ycarus@zugaina.org>
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=iperf
PKG_SOURCE_VERSION:=40e7c05440583f229edd6b6ca05c5d97b66fcf15
PKG_VERSION:=3.6-$(PKG_SOURCE_VERSION)
PKG_RELEASE:=2
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/esnet/iperf.git
PKG_MAINTAINER:=Yannick Chabanois <ycarus@zugaina.org>
PKG_LICENSE:=BSD-3-Clause
PKG_BUILD_PARALLEL:=1
PKG_INSTALL:=1
PKG_FIXUP:=autoreconf
include $(INCLUDE_DIR)/package.mk
DISABLE_NLS:=
define Package/iperf3/default
SECTION:=net
CATEGORY:=Network
TITLE:=Internet Protocol bandwidth measuring tool
URL:=https://github.com/esnet/iperf
endef
define Package/iperf3
$(call Package/iperf3/default)
VARIANT:=nossl
endef
define Package/iperf3-ssl
$(call Package/iperf3/default)
TITLE+= with iperf_auth support
VARIANT:=ssl
DEPENDS:= +libopenssl
endef
TARGET_CFLAGS += -D_GNU_SOURCE
CONFIGURE_ARGS += --disable-shared
ifeq ($(BUILD_VARIANT),ssl)
CONFIGURE_ARGS += --with-openssl="$(STAGING_DIR)/usr"
else
CONFIGURE_ARGS += --without-openssl
endif
MAKE_FLAGS += noinst_PROGRAMS=
define Package/iperf3/description
Iperf is a modern alternative for measuring TCP and UDP bandwidth
performance, allowing the tuning of various parameters and
characteristics.
endef
# autoreconf fails if the README file isn't present
define Build/Prepare
$(call Build/Prepare/Default)
touch $(PKG_BUILD_DIR)/README
endef
define Package/iperf3/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iperf3 $(1)/usr/bin/
endef
define Package/iperf3-ssl/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_INSTALL_DIR)/usr/bin/iperf3 $(1)/usr/bin/
endef
$(eval $(call BuildPackage,iperf3))
$(eval $(call BuildPackage,iperf3-ssl))

13
root/package/system/fstools/patches/100-disable-lazy-init.patch
View file

@ -1,13 +0,0 @@
diff --git a/libfstools/rootdisk.c b/libfstools/rootdisk.c
index dd00c1b..f3b87fc 100644
--- a/libfstools/rootdisk.c
+++ b/libfstools/rootdisk.c
@@ -270,7 +270,7 @@ static int rootdisk_volume_init(struct volume *v)
if (rootdisk_use_f2fs(p))
snprintf(str, sizeof(str), "mkfs.f2fs -q -l rootfs_data %s", v->blk);
else
- snprintf(str, sizeof(str), "mkfs.ext4 -q -L rootfs_data %s", v->blk);
+ snprintf(str, sizeof(str), "mkfs.ext4 -q -E lazy_itable_init=0,lazy_journal_init=0 -L rootfs_data %s", v->blk);
ret = system(str);
break;
default:

51
root/package/utils/wmt/Makefile
View file

@ -1,51 +0,0 @@
#
# Copyright (C) 2009 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=wmt
PKG_VERSION:=1.0.0
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL:=https://github.com/abbradar/wmt
PKG_SOURCE_VERSION:=2127e23dd94df960b12f3ffff806bcf41ebbf4b8
PKG_MAINTAINER:=Nikolay Amiantov <ab@fmap.me>
PKG_BUILD_PARALLEL:=1
include $(INCLUDE_DIR)/package.mk
define Package/$(PKG_NAME)
SECTION:=utils
CATEGORY:=Utilities
TITLE:=wmt utility for MT6625L
DEPENDS:=kmod-mt6625l-wlan-gen2
MAINTAINER:=Jinkai li <lijk@synertone.net>
endef
define Package/$(PKG_NAME)/description
Utility for loading MT6625L firmware.
endef
define Package/$(PKG_NAME)/install
$(INSTALL_DIR) $(1)/usr/bin
$(INSTALL_BIN) $(PKG_BUILD_DIR)/stp_uart_launcher $(1)/usr/bin/
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wmt_loader $(1)/usr/bin/
$(INSTALL_BIN) $(PKG_BUILD_DIR)/wmt_loopback $(1)/usr/bin/
$(INSTALL_DIR) $(1)/system/etc/firmware
$(INSTALL_DATA) $(PKG_BUILD_DIR)/config/WMT_SOC.cfg $(1)/system/etc/firmware
$(INSTALL_DATA) $(PKG_BUILD_DIR)/config/WMT_SOC.cfg $(1)/system/etc/firmware/WMT.cfg
$(INSTALL_DIR) $(1)/etc/firmware
$(CP) -r $(PKG_BUILD_DIR)/firmware/* $(1)/etc/firmware/
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/wmt.init $(1)/etc/init.d/wmt
$(INSTALL_DIR) $(1)/etc/uci-defaults
$(INSTALL_BIN) ./files/wmt.defaults $(1)/etc/uci-defaults/8803-wmt
endef
$(eval $(call BuildPackage,$(PKG_NAME)))

11
root/package/utils/wmt/files/wmt.defaults
View file

@ -1,11 +0,0 @@
#!/bin/sh
if [ -z "$(uci -q get ucitrack.@wmt[0])" ]; then
uci -q batch <<-EOF
set ucitrack.@wmt[-1]=wmt
set ucitrack.@wmt[-1].init=wmt
add_list ucitrack.@wireless[0].affects=wmt
commit ucitrack
EOF
fi
exit 0

119
root/package/utils/wmt/files/wmt.init
View file

@ -1,119 +0,0 @@
#!/bin/sh /etc/rc.common
START=69
check_mtk_device() {
config_get phy "$1" phy
[ "$phy" = "mtkp2p0" ] && {
[ "$(uci -q get wireless.$1.disabled)" = "1" ] || apmode="$1"
[ -z "$(uci -q get wireless.default_$1.ifname)" ] && {
uci -q batch <<-EOF
set wireless.default_$1.ifname=mtkap0
set wireless.default_$1.bss_load_update_period=0
rename wireless.$1=ap
rename wireless.default_$1=default_ap
set wireless.default_$1.device=ap
EOF
}
}
[ "$phy" = "mtkphy0" ] && {
[ "$(uci -q get wireless.$1.disabled)" = "1" ] || wlanmode="$1"
[ "$(uci -q get wireless.default_$1.mode)" = "ap" ] && {
uci -q batch <<-EOF
set wireless.default_$1.mode=sta
EOF
}
[ -z "$(uci -q get wireless.default_$1.ifname)" ] && {
uci -q batch <<-EOF
set wireless.default_$1.ifname=mtkwlan0
set wireless.default_$1.bss_load_update_period=0
rename wireless.$1=client
rename wireless.default_$1=default_client
set wireless.default_$1.device=client
EOF
}
}
}
find_radio() {
config_load wireless
apmode=""
wlanmode=""
config_foreach check_mtk_device wifi-device
uci -q commit wireless
}
start_ap() {
echo A > /dev/wmtWifi
# Those are recommended by vendor to avoid chip lockup.
tc qdisc add dev mtkap0 root handle 1: htb default 11
tc class add dev mtkap0 parent 1:1 classid 1:2 htb rate 8Mbit ceil 4Mbit prio 2
find_radio
if [ -n "$apmode" ]; then
config_get_bool disabled "$apmode" disabled
[ "$disabled" = "1" ] || wifi up "$apmode" 2>/dev/null
fi
}
start_wlan() {
echo 1 > /dev/wmtWifi
# Those are recommended by vendor to avoid chip lockup.
tc qdisc add dev mtkap0 root handle 1: htb default 11
tc class add dev mtkap0 parent 1:1 classid 1:2 htb rate 8Mbit ceil 4Mbit prio 2
find_radio
if [ -n "$wlanmode" ]; then
config_get_bool disabled "$wlanmode" disabled
[ "$disabled" = "1" ] || wifi up "$wlanmode" 2>/dev/null
fi
}
stop_apwlan() {
find_radio
[ -n "$apmode" ] && wifi down "$apmode" 2>/dev/null
[ -n "$wlanmode" ] && wifi down "$wlanmode" 2>/dev/null
echo 0 > /dev/wmtWifi
}
start() {
find_radio
[ -c /dev/stpwmt ] || /usr/bin/wmt_loader 2>&1
/usr/bin/stp_uart_launcher -p /etc/firmware 2>&1 | logger -t stp_uart_launcher &
echo "$!" > /var/run/stp_uart_launcher.pid
sleep 3
if [ -c /dev/wmtWifi ]; then
[ -n "$apmode" ] && start_ap
[ -n "$wlanmode" ] && start_wlan
[ -z "$apmode" ] && [ -z "$wlanmode" ] && start_ap
return 0
else
return 1
fi
}
stop() {
find_radio
if [ -c /dev/wmtWifi ]; then
stop_apwlan
stp_pid="$(cat /var/run/stp_uart_launcher.pid 2>/dev/null)"
if [ -n "$stp_pid" ]; then
kill "$stp_pid"
rm /var/run/stp_uart_launcher.pid
fi
fi
}
reload() {
find_radio
if [ -c /dev/wmtWifi ]; then
stop_apwlan
[ -n "$apmode" ] && start_ap
[ -n "$wlanmode" ] && start_wlan
[ -z "$apmode" ] && [ -z "$wlanmode" ] && start_ap
fi
}

430
root/rules.mk
View file

@ -1,430 +0,0 @@
#
# Copyright (C) 2006-2010 OpenWrt.org
# Copyright (C) 2016 LEDE Project
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
ifneq ($(__rules_inc),1)
__rules_inc=1
ifeq ($(DUMP),)
-include $(TOPDIR)/.config
endif
include $(TOPDIR)/include/debug.mk
include $(TOPDIR)/include/verbose.mk
ifneq ($(filter check,$(MAKECMDGOALS)),)
CHECK:=1
DUMP:=1
endif
export TMP_DIR:=$(TOPDIR)/tmp
export TMPDIR:=$(TMP_DIR)
qstrip=$(strip $(subst ",,$(1)))
#"))
empty:=
space:= $(empty) $(empty)
comma:=,
merge=$(subst $(space),,$(1))
confvar=$(shell echo '$(foreach v,$(1),$(v)=$(subst ','\'',$($(v))))' | $(STAGING_DIR_HOST)/bin/mkhash md5)
strip_last=$(patsubst %.$(lastword $(subst .,$(space),$(1))),%,$(1))
paren_left = (
paren_right = )
chars_lower = a b c d e f g h i j k l m n o p q r s t u v w x y z
chars_upper = A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
define sep
endef
define newline
endef
__tr_list = $(join $(join $(1),$(foreach char,$(1),$(comma))),$(2))
__tr_head_stripped = $(subst $(space),,$(foreach cv,$(call __tr_list,$(1),$(2)),$$$(paren_left)subst$(cv)$(comma)))
__tr_head = $(subst $(paren_left)subst,$(paren_left)subst$(space),$(__tr_head_stripped))
__tr_tail = $(subst $(space),,$(foreach cv,$(1),$(paren_right)))
__tr_template = $(__tr_head)$$(1)$(__tr_tail)
$(eval toupper = $(call __tr_template,$(chars_lower),$(chars_upper)))
$(eval tolower = $(call __tr_template,$(chars_upper),$(chars_lower)))
version_abbrev = $(if $(if $(CHECK),,$(DUMP)),$(1),$(shell printf '%.8s' $(1)))
_SINGLE=export MAKEFLAGS=$(space);
CFLAGS:=
ARCH:=$(subst i486,i386,$(subst i586,i386,$(subst i686,i386,$(call qstrip,$(CONFIG_ARCH)))))
ARCH_PACKAGES:=$(call qstrip,$(CONFIG_TARGET_ARCH_PACKAGES))
BOARD:=$(call qstrip,$(CONFIG_TARGET_BOARD))
SUBTARGET:=$(call qstrip,$(CONFIG_TARGET_SUBTARGET))
TARGET_OPTIMIZATION:=$(call qstrip,$(CONFIG_TARGET_OPTIMIZATION))
export EXTRA_OPTIMIZATION:=$(filter-out -fno-plt,$(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION)))
TARGET_SUFFIX=$(call qstrip,$(CONFIG_TARGET_SUFFIX))
BUILD_SUFFIX:=$(call qstrip,$(CONFIG_BUILD_SUFFIX))
SUBDIR:=$(patsubst $(TOPDIR)/%,%,${CURDIR})
BUILD_SUBDIR:=$(patsubst $(TOPDIR)/%,%,${CURDIR})
NPROC:=$(shell sysctl -n hw.ncpu 2>/dev/null || nproc)
export SHELL:=/usr/bin/env bash
IS_PACKAGE_BUILD := $(if $(filter package/%,$(BUILD_SUBDIR)),1)
OPTIMIZE_FOR_CPU=$(subst i386,i486,$(ARCH))
ifneq (,$(findstring $(ARCH) , aarch64 aarch64_be powerpc ))
FPIC:=-fPIC
else
FPIC:=-fpic
endif
HOST_FPIC:=-fPIC
ARCH_SUFFIX:=$(call qstrip,$(CONFIG_CPU_TYPE))
GCC_ARCH:=
ifneq ($(ARCH_SUFFIX),)
ARCH_SUFFIX:=_$(ARCH_SUFFIX)
endif
ifneq ($(filter -march=armv%,$(TARGET_OPTIMIZATION)),)
GCC_ARCH:=$(patsubst -march=%,%,$(filter -march=armv%,$(TARGET_OPTIMIZATION)))
endif
ifdef CONFIG_HAS_SPE_FPU
TARGET_SUFFIX:=$(TARGET_SUFFIX)spe
endif
ifdef CONFIG_MIPS64_ABI
ifneq ($(CONFIG_MIPS64_ABI_O32),y)
ARCH_SUFFIX:=$(ARCH_SUFFIX)_$(call qstrip,$(CONFIG_MIPS64_ABI))
endif
endif
DEFAULT_SUBDIR_TARGETS:=clean download prepare compile update refresh prereq dist distcheck configure check check-depends
define DefaultTargets
$(foreach t,$(DEFAULT_SUBDIR_TARGETS) $(1),
.$(t):
$(t): .$(t)
.PHONY: $(t) .$(t)
)
endef
DL_DIR:=$(if $(call qstrip,$(CONFIG_DOWNLOAD_FOLDER)),$(call qstrip,$(CONFIG_DOWNLOAD_FOLDER)),$(TOPDIR)/dl)
OUTPUT_DIR:=$(if $(call qstrip,$(CONFIG_BINARY_FOLDER)),$(call qstrip,$(CONFIG_BINARY_FOLDER)),$(TOPDIR)/bin)
BIN_DIR:=$(OUTPUT_DIR)/targets/$(BOARD)/$(SUBTARGET)
INCLUDE_DIR:=$(TOPDIR)/include
SCRIPT_DIR:=$(TOPDIR)/scripts
BUILD_DIR_BASE:=$(TOPDIR)/build_dir
ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
GCCV:=$(call qstrip,$(CONFIG_GCC_VERSION))
LIBC:=$(call qstrip,$(CONFIG_LIBC))
REAL_GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-openwrt-linux$(if $(TARGET_SUFFIX),-$(TARGET_SUFFIX))
GNU_TARGET_NAME=$(OPTIMIZE_FOR_CPU)-openwrt-linux
DIR_SUFFIX:=_$(LIBC)$(if $(CONFIG_arm),_eabi)
BIN_DIR:=$(BIN_DIR)$(if $(CONFIG_USE_MUSL),,-$(LIBC))
TARGET_DIR_NAME = target-$(ARCH)$(ARCH_SUFFIX)$(DIR_SUFFIX)$(if $(BUILD_SUFFIX),_$(BUILD_SUFFIX))
TOOLCHAIN_DIR_NAME = toolchain-$(ARCH)$(ARCH_SUFFIX)_gcc-$(GCCV)$(DIR_SUFFIX)
else
ifeq ($(CONFIG_NATIVE_TOOLCHAIN),)
GNU_TARGET_NAME=$(call qstrip,$(CONFIG_TARGET_NAME))
else
GNU_TARGET_NAME=$(shell gcc -dumpmachine)
endif
REAL_GNU_TARGET_NAME=$(GNU_TARGET_NAME)
LIBC:=$(call qstrip,$(CONFIG_LIBC))
TARGET_DIR_NAME:=target-$(GNU_TARGET_NAME)_$(LIBC)$(if $(BUILD_SUFFIX),_$(BUILD_SUFFIX))
TOOLCHAIN_DIR_NAME:=toolchain-$(GNU_TARGET_NAME)
endif
ifeq ($(or $(CONFIG_EXTERNAL_TOOLCHAIN),$(CONFIG_TARGET_uml)),)
ifeq ($(CONFIG_GCC_USE_IREMAP),y)
iremap = -iremap$(1):$(2)
else
iremap = -f$(if $(CONFIG_REPRODUCIBLE_DEBUG_INFO),file,macro)-prefix-map=$(1)=$(2)
endif
endif
PACKAGE_DIR:=$(BIN_DIR)/packages
PACKAGE_DIR_ALL:=$(TOPDIR)/staging_dir/packages/$(BOARD)
BUILD_DIR:=$(BUILD_DIR_BASE)/$(TARGET_DIR_NAME)
STAGING_DIR:=$(TOPDIR)/staging_dir/$(TARGET_DIR_NAME)
BUILD_DIR_TOOLCHAIN:=$(BUILD_DIR_BASE)/$(TOOLCHAIN_DIR_NAME)
TOOLCHAIN_DIR:=$(TOPDIR)/staging_dir/$(TOOLCHAIN_DIR_NAME)
STAMP_DIR:=$(BUILD_DIR)/stamp
STAMP_DIR_HOST=$(BUILD_DIR_HOST)/stamp
TARGET_ROOTFS_DIR?=$(if $(call qstrip,$(CONFIG_TARGET_ROOTFS_DIR)),$(call qstrip,$(CONFIG_TARGET_ROOTFS_DIR)),$(BUILD_DIR))
TARGET_DIR:=$(TARGET_ROOTFS_DIR)/root-$(BOARD)
STAGING_DIR_ROOT:=$(STAGING_DIR)/root-$(BOARD)
STAGING_DIR_IMAGE:=$(STAGING_DIR)/image
BUILD_LOG_DIR:=$(if $(call qstrip,$(CONFIG_BUILD_LOG_DIR)),$(call qstrip,$(CONFIG_BUILD_LOG_DIR)),$(TOPDIR)/logs)
PKG_INFO_DIR := $(STAGING_DIR)/pkginfo
BUILD_DIR_HOST:=$(if $(IS_PACKAGE_BUILD),$(BUILD_DIR_BASE)/hostpkg,$(BUILD_DIR_BASE)/host)
STAGING_DIR_HOST:=$(TOPDIR)/staging_dir/host
STAGING_DIR_HOSTPKG:=$(TOPDIR)/staging_dir/hostpkg
TARGET_PATH:=$(subst $(space),:,$(filter-out .,$(filter-out ./,$(subst :,$(space),$(PATH)))))
TARGET_INIT_PATH:=$(call qstrip,$(CONFIG_TARGET_INIT_PATH))
TARGET_INIT_PATH:=$(if $(TARGET_INIT_PATH),$(TARGET_INIT_PATH),/usr/sbin:/sbin:/usr/bin:/bin)
TARGET_CFLAGS:=$(TARGET_OPTIMIZATION)$(if $(CONFIG_DEBUG), -g3) $(call qstrip,$(CONFIG_EXTRA_OPTIMIZATION))
TARGET_CXXFLAGS = $(TARGET_CFLAGS)
TARGET_ASFLAGS_DEFAULT = $(TARGET_CFLAGS)
TARGET_ASFLAGS = $(TARGET_ASFLAGS_DEFAULT)
ifneq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
LIBGCC_S_PATH=$(realpath $(wildcard $(call qstrip,$(CONFIG_LIBGCC_ROOT_DIR))/$(call qstrip,$(CONFIG_LIBGCC_FILE_SPEC))))
LIBGCC_S=$(if $(LIBGCC_S_PATH),-L$(dir $(LIBGCC_S_PATH)) -lgcc_s)
LIBGCC_A=$(realpath $(lastword $(wildcard $(dir $(LIBGCC_S_PATH))/gcc/*/*/libgcc.a)))
else
LIBGCC_A=$(lastword $(wildcard $(TOOLCHAIN_DIR)/lib/gcc/*/*/libgcc.a))
LIBGCC_S=$(if $(wildcard $(TOOLCHAIN_DIR)/lib/libgcc_s.so),-L$(TOOLCHAIN_DIR)/lib -lgcc_s,$(LIBGCC_A))
endif
ifeq ($(CONFIG_ARCH_64BIT),y)
LIB_SUFFIX:=64
endif
ifndef DUMP
ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
-include $(TOOLCHAIN_DIR)/info.mk
export GCC_HONOUR_COPTS:=0
TARGET_CROSS:=$(if $(TARGET_CROSS),$(TARGET_CROSS),$(OPTIMIZE_FOR_CPU)-openwrt-linux$(if $(TARGET_SUFFIX),-$(TARGET_SUFFIX))-)
TARGET_CFLAGS+= -fhonour-copts -Wno-error=unused-but-set-variable -Wno-error=unused-result
TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/usr/include
ifeq ($(CONFIG_USE_MUSL),y)
TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/include/fortify
endif
TARGET_CPPFLAGS+= -I$(TOOLCHAIN_DIR)/include
TARGET_LDFLAGS+= -L$(TOOLCHAIN_DIR)/usr/lib -L$(TOOLCHAIN_DIR)/lib
TARGET_PATH:=$(TOOLCHAIN_DIR)/bin:$(TARGET_PATH)
else
ifeq ($(CONFIG_NATIVE_TOOLCHAIN),)
TARGET_CROSS:=$(call qstrip,$(CONFIG_TOOLCHAIN_PREFIX))
TOOLCHAIN_ROOT_DIR:=$(call qstrip,$(CONFIG_TOOLCHAIN_ROOT))
TOOLCHAIN_BIN_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_BIN_PATH)))
TOOLCHAIN_INC_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_INC_PATH)))
TOOLCHAIN_LIB_DIRS:=$(patsubst ./%,$(TOOLCHAIN_ROOT_DIR)/%,$(call qstrip,$(CONFIG_TOOLCHAIN_LIB_PATH)))
ifneq ($(TOOLCHAIN_BIN_DIRS),)
TARGET_PATH:=$(subst $(space),:,$(TOOLCHAIN_BIN_DIRS)):$(TARGET_PATH)
endif
ifneq ($(TOOLCHAIN_INC_DIRS),)
TARGET_CPPFLAGS+= $(patsubst %,-I%,$(TOOLCHAIN_INC_DIRS))
endif
ifneq ($(TOOLCHAIN_LIB_DIRS),)
TARGET_LDFLAGS+= $(patsubst %,-L%,$(TOOLCHAIN_LIB_DIRS))
endif
TARGET_PATH:=$(TOOLCHAIN_DIR)/bin:$(TARGET_PATH)
endif
endif
endif
TARGET_PATH_PKG:=$(STAGING_DIR)/host/bin:$(STAGING_DIR_HOSTPKG)/bin:$(TARGET_PATH)
ifeq ($(CONFIG_SOFT_FLOAT),y)
SOFT_FLOAT_CONFIG_OPTION:=--with-float=soft
ifeq ($(CONFIG_arm),y)
TARGET_CFLAGS+= -mfloat-abi=soft
else
TARGET_CFLAGS+= -msoft-float
endif
else
SOFT_FLOAT_CONFIG_OPTION:=
ifeq ($(CONFIG_arm),y)
TARGET_CFLAGS+= -mfloat-abi=hard
endif
endif
export PATH:=$(TARGET_PATH)
export STAGING_DIR STAGING_DIR_HOST STAGING_DIR_HOSTPKG
export SH_FUNC:=. $(INCLUDE_DIR)/shell.sh;
PKG_CONFIG:=$(STAGING_DIR_HOST)/bin/pkg-config
export PKG_CONFIG
HOSTCC:=gcc
HOSTCXX:=g++
HOST_CPPFLAGS:=-I$(STAGING_DIR_HOST)/include $(if $(IS_PACKAGE_BUILD),-I$(STAGING_DIR_HOSTPKG)/include -I$(STAGING_DIR)/host/include)
HOST_CFLAGS:=-O2 $(HOST_CPPFLAGS)
HOST_LDFLAGS:=-L$(STAGING_DIR_HOST)/lib $(if $(IS_PACKAGE_BUILD),-L$(STAGING_DIR_HOSTPKG)/lib -L$(STAGING_DIR)/host/lib)
ifeq ($(CONFIG_EXTERNAL_TOOLCHAIN),)
TARGET_AR:=$(TARGET_CROSS)gcc-ar
TARGET_RANLIB:=$(TARGET_CROSS)gcc-ranlib
TARGET_NM:=$(TARGET_CROSS)gcc-nm
else
TARGET_AR:=$(TARGET_CROSS)ar
TARGET_RANLIB:=$(TARGET_CROSS)ranlib
TARGET_NM:=$(TARGET_CROSS)nm
endif
BUILD_KEY=$(TOPDIR)/key-build
FAKEROOT:=$(STAGING_DIR_HOST)/bin/fakeroot
TARGET_CC:=$(TARGET_CROSS)gcc
TARGET_CXX:=$(TARGET_CROSS)g++
KPATCH:=$(SCRIPT_DIR)/patch-kernel.sh
SED:=$(STAGING_DIR_HOST)/bin/sed -i -e
ESED:=$(STAGING_DIR_HOST)/bin/sed -E -i -e
CP:=cp -fpR
LN:=ln -sf
XARGS:=xargs -r
BASH:=bash
TAR:=tar
FIND:=find
PATCH:=patch
PYTHON:=python
INSTALL_BIN:=install -m0755
INSTALL_SUID:=install -m4755
INSTALL_DIR:=install -d -m0755
INSTALL_DATA:=install -m0644
INSTALL_CONF:=install -m0600
TARGET_CC_NOCACHE:=$(TARGET_CC)
TARGET_CXX_NOCACHE:=$(TARGET_CXX)
HOSTCC_NOCACHE:=$(HOSTCC)
HOSTCXX_NOCACHE:=$(HOSTCXX)
export TARGET_CC_NOCACHE
export TARGET_CXX_NOCACHE
export HOSTCC_NOCACHE
export HOSTCXX_NOCACHE
ifneq ($(CONFIG_CCACHE),)
TARGET_CC:= ccache_cc
TARGET_CXX:= ccache_cxx
HOSTCC:= ccache $(HOSTCC)
HOSTCXX:= ccache $(HOSTCXX)
export CCACHE_BASEDIR:=$(TOPDIR)
export CCACHE_DIR:=$(if $(call qstrip,$(CONFIG_CCACHE_DIR)),$(call qstrip,$(CONFIG_CCACHE_DIR)),$(TOPDIR)/.ccache)
export CCACHE_COMPILERCHECK:=%compiler% -dumpmachine; %compiler% -dumpversion
endif
TARGET_CONFIGURE_OPTS = \
AR="$(TARGET_AR)" \
AS="$(TARGET_CC) -c $(TARGET_ASFLAGS)" \
LD=$(TARGET_CROSS)ld \
NM="$(TARGET_NM)" \
CC="$(TARGET_CC)" \
GCC="$(TARGET_CC)" \
CXX="$(TARGET_CXX)" \
RANLIB="$(TARGET_RANLIB)" \
STRIP=$(TARGET_CROSS)strip \
OBJCOPY=$(TARGET_CROSS)objcopy \
OBJDUMP=$(TARGET_CROSS)objdump \
SIZE=$(TARGET_CROSS)size
# strip an entire directory
ifneq ($(CONFIG_NO_STRIP),)
RSTRIP:=:
STRIP:=:
else
ifneq ($(CONFIG_USE_STRIP),)
STRIP:=$(TARGET_CROSS)strip $(call qstrip,$(CONFIG_STRIP_ARGS))
else
ifneq ($(CONFIG_USE_SSTRIP),)
STRIP:=$(STAGING_DIR_HOST)/bin/sstrip $(call qstrip,$(CONFIG_SSTRIP_ARGS))
endif
endif
RSTRIP= \
export CROSS="$(TARGET_CROSS)" \
$(if $(PKG_BUILD_ID),KEEP_BUILD_ID=1) \
$(if $(CONFIG_KERNEL_KALLSYMS),NO_RENAME=1) \
$(if $(CONFIG_KERNEL_PROFILING),KEEP_SYMBOLS=1); \
NM="$(TARGET_CROSS)nm" \
STRIP="$(STRIP)" \
STRIP_KMOD="$(SCRIPT_DIR)/strip-kmod.sh" \
PATCHELF="$(STAGING_DIR_HOST)/bin/patchelf" \
$(SCRIPT_DIR)/rstrip.sh
endif
ifeq ($(CONFIG_IPV6),y)
DISABLE_IPV6:=
else
DISABLE_IPV6:=--disable-ipv6
endif
TAR_OPTIONS:=-xf -
ifeq ($(CONFIG_BUILD_LOG),y)
BUILD_LOG:=1
endif
export BISON_PKGDATADIR:=$(STAGING_DIR_HOST)/share/bison
export M4:=$(STAGING_DIR_HOST)/bin/m4
define shvar
V_$(subst .,_,$(subst -,_,$(subst /,_,$(1))))
endef
define shexport
export $(call shvar,$(1))=$$(call $(1))
endef
# Execute commands under flock
# $(1) => The shell expression.
# $(2) => The lock name. If not given, the global lock will be used.
ifneq ($(wildcard $(STAGING_DIR_HOST)/bin/flock),)
define locked
SHELL= \
flock \
$(TMP_DIR)/.$(if $(2),$(strip $(2)),global).flock \
-c '$(subst ','\'',$(1))'
endef
else
locked=$(1)
endif
# Recursively copy paths into another directory, purge dangling
# symlinks before.
# $(1) => File glob expression
# $(2) => Destination directory
define file_copy
for src_dir in $(sort $(foreach d,$(wildcard $(1)),$(dir $(d)))); do \
( cd $$src_dir; find -type f -or -type d ) | \
( cd $(2); while :; do \
read FILE; \
[ -z "$$FILE" ] && break; \
[ -L "$$FILE" ] || continue; \
echo "Removing symlink $(2)/$$FILE"; \
rm -f "$$FILE"; \
done; ); \
done; \
$(CP) $(1) $(2)
endef
# Calculate sha256sum of any plain file within a given directory
# $(1) => Input directory
# $(2) => If set, recurse into subdirectories
define sha256sums
(cd $(1); find . $(if $(2),,-maxdepth 1) -type f -not -name 'sha256sums' -printf "%P\n" | sort | \
xargs -r $(STAGING_DIR_HOST)/bin/mkhash -n sha256 | sed -ne 's!^\(.*\) \(.*\)$$!\1 *\2!p' > sha256sums)
endef
# file extension
ext=$(word $(words $(subst ., ,$(1))),$(subst ., ,$(1)))
all:
FORCE: ;
.PHONY: FORCE
check: FORCE
@true
val.%:
@$(if $(filter undefined,$(origin $*)),\
echo "$* undefined" >&2, \
echo '$(subst ','"'"',$($*))' \
)
var.%:
@$(if $(filter undefined,$(origin $*)),\
echo "$* undefined" >&2, \
echo "$*='"'$(subst ','"'\"'\"'"',$($*))'"'" \
)
endif #__rules_inc

67
root/target/linux/bcm27xx/patches-5.4/990-xhci-quirks-add-link-TRB-quirk-VL805.patch
View file

@ -1,67 +0,0 @@
From 5d9d9ba7547ad27d76dd36791f54a57ff555ff8a Mon Sep 17 00:00:00 2001
From: Jonathan Bell <jonathan@raspberrypi.org>
Date: Mon, 26 Oct 2020 14:03:35 +0000
Subject: [PATCH] xhci: quirks: add link TRB quirk for VL805
The VL805 controller can't cope with the TR Dequeue Pointer for an endpoint
being set to a Link TRB. The hardware-maintained endpoint context ends up
stuck at the address of the Link TRB, leading to erroneous ring expansion
events whenever the enqueue pointer wraps to the dequeue position.
If the search for the end of the current TD and ring cycle state lands on
a Link TRB, move to the next segment.
See: https://github.com/raspberrypi/linux/issues/3919
Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
drivers/usb/host/xhci-pci.c | 1 +
drivers/usb/host/xhci-ring.c | 10 ++++++++++
drivers/usb/host/xhci.h | 1 +
3 files changed, 12 insertions(+)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 5238fa29ea978..b975e6803d485 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -251,6 +251,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == 0x3483) {
xhci->quirks |= XHCI_LPM_SUPPORT;
xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
+ xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
}
if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index d99e636f3844c..8149abff857c2 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -624,6 +624,16 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
} while (!cycle_found || !td_last_trb_found);
+ /*
+ * Quirk: the xHC does not correctly parse link TRBs if the HW Dequeue
+ * pointer is set to one. Advance to the next TRB (and next segment).
+ */
+ if (xhci->quirks & XHCI_AVOID_DQ_ON_LINK && trb_is_link(new_deq)) {
+ if (link_trb_toggles_cycle(new_deq))
+ state->new_cycle_state ^= 0x1;
+ next_trb(xhci, ep_ring, &new_seg, &new_deq);
+ }
+
state->new_deq_seg = new_seg;
state->new_deq_ptr = new_deq;
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 2033bb8683033..90ccc71231c1a 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1874,6 +1874,7 @@ struct xhci_hcd {
#define XHCI_RESET_PLL_ON_DISCONNECT BIT_ULL(34)
#define XHCI_SNPS_BROKEN_SUSPEND BIT_ULL(35)
#define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(36)
+#define XHCI_AVOID_DQ_ON_LINK BIT_ULL(37)
unsigned int num_active_eps;
unsigned int limit_active_eps;

90
root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
View file

@ -1,90 +0,0 @@
#!/bin/sh
#
# Copyright (C) 2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
case "$board" in
alfa-network,ap120c-ac)
ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
;;
asus,rt-ac58u)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
;;
avm,fritzbox-4040)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
;;
avm,fritzbox-7530 |\
glinet,gl-b1300)
ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
;;
edgecore,oap100)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
engenius,eap1300)
ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
;;
engenius,eap2200)
ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
;;
engenius,ens620ext)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
;;
pangu,l1000)
ucidef_set_led_default "power" "POWER" "${boardname}:blue:power" "1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt"
ucidef_set_led_switch "wan" "WAN" "${boardname}:blue:wan" "switch0" "0x20"
;;
mobipromo,cm520-79f)
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
;;
pangu,l1000)
ucidef_set_led_default "power" "POWER" "blue:power" "1"
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
;;
p2w,r619ac |\
p2w,r619ac-128m)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
;;
zyxel,nbg6617 |\
zyxel,wre6606)
ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
;;
esac
board_config_flush
exit 0

190
root/target/linux/ipq40xx/base-files/etc/board.d/02_network
View file

@ -1,190 +0,0 @@
#!/bin/sh
#
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
# Copyright (c) 2011-2015 OpenWrt.org
#
. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh
ipq40xx_setup_interfaces()
{
local board="$1"
case "$board" in
8dev,habanero-dvk|\
8dev,jalapeno|\
alfa-network,ap120c-ac|\
engenius,emr3500|\
engenius,ens620ext|\
luma,wrtq-329acn|\
plasmacloud,pa1200|\
plasmacloud,pa2200)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
aruba,ap-303|\
aruba,ap-365|\
avm,fritzrepeater-1200|\
dlink,dap-2610 |\
engenius,eap1300|\
engenius,emd1|\
meraki,mr33|\
netgear,ex6100v2|\
netgear,ex6150v2|\
zyxel,wre6606)
ucidef_set_interface_lan "eth0"
;;
aruba,ap-303h)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
;;
asus,map-ac2200|\
cilab,meshpoint-one|\
edgecore,ecw5211|\
edgecore,oap100|\
openmesh,a42|\
openmesh,a62)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
asus,rt-ac58u|\
zyxel,nbg6617)|\
p2w,r619ac-128m)|\
p2w,r619ac)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
avm,fritzbox-4040|\
linksys,ea6350v3|\
linksys,ea8300|\
pangu,l1000|\
linksys,mr8300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
avm,fritzbox-7530)
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
;;
avm,fritzrepeater-3000)
ucidef_add_switch "switch0" \
"0u@eth0" "4:lan:1" "5:lan:2"
;;
compex,wpj419|\
compex,wpj428|\
engenius,eap2200)
ucidef_set_interface_lan "eth0 eth1"
;;
buffalo,wtr-m2133hp)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
;;
cellc,rtl30vw)
ucidef_set_interface_lan "eth0"
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan"
;;
devolo,magic-2-wifi-next)
ucidef_set_interface_lan "eth0 eth1 eth2"
;;
ezviz,cs-w3-wd1200g-eup)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
;;
glinet,gl-b1300 |\
glinet,gl-s1300)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan"
;;
mobipromo,cm520-79f)
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan:2" "4:lan:1"
ucidef_set_interface_wan "eth1"
;;
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
;;
unielec,u4019-32m)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
;;
*)
echo "Unsupported hardware. Network interfaces not initialized"
;;
esac
}
ipq40xx_setup_macs()
{
local board="$1"
local lan_mac=""
local wan_mac=""
local label_mac=""
case "$board" in
8dev,habanero-dvk)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
;;
asus,rt-ac58u|\
p2w,r619ac-128m|\
p2w,r619ac)
CI_UBIPART=UBI_DEV
wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
label_mac=$wan_mac
;;
cilab,meshpoint-one)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
;;
devolo,magic-2-wifi-next)
lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
label_mac=$lan_mac
;;
dlink,dap-2610)
lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
label_mac=$lan_mac
;;
engenius,eap2200|\
engenius,emd1)
lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
label_mac=$lan_mac
;;
engenius,emr3500)
wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
label_mac=$wan_mac
;;
engenius,ens620ext)
wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
ezviz,cs-w3-wd1200g-eup)
label_mac=$(mtd_get_mac_binary "ART" 0x6)
;;
linksys,ea6350v3)
wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
lan_mac=$(macaddr_add "$wan_mac" 1)
;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}
board_config_update
board=$(board_name)
ipq40xx_setup_interfaces $board
ipq40xx_setup_macs $board
board_config_flush
exit 0

26
root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
View file

@ -1,26 +0,0 @@
#!/bin/sh
. /lib/functions/uci-defaults.sh
board_config_update
board=$(board_name)
case "$board" in
cellc,rtl30vw)
ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
;;
cilab,meshpoint-one)
ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
;;
compex,wpj428)
ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
;;
esac
board_config_flush
exit 0

276
root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
View file

@ -1,276 +0,0 @@
#!/bin/sh
[ -e /lib/firmware/$FIRMWARE ] && exit 0
. /lib/functions/caldata.sh
board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:01:00.0.bin")
case "$board" in
meraki,mr33)
caldata_extract_ubi "ART" 0x9000 0x844
caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
;;
esac
;;
"ath10k/pre-cal-pci-0000:01:00.0.bin")
case "$board" in
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x9000 0x2f20
ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
;;
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x9000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
;;
engenius,eap2200 |\
openmesh,a62 |\
plasmacloud,pa2200)
caldata_extract "0:ART" 0x9000 0x2f20
;;
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x9000 0x2f20
# OEM assigns 4 sequential MACs
ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
;;
pangu,l1000)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
esac
;;
"ath10k/pre-cal-ahb-a000000.wifi.bin")
case "$board" in
8dev,habanero-dvk |\
8dev,jalapeno |\
alfa-network,ap120c-ac |\
cilab,meshpoint-one |\
ezviz,cs-w3-wd1200g-eup |\
glinet,gl-b1300 |\
glinet,gl-s1300 |\
linksys,ea6350v3 |\
mobipromo,cm520-79f |\
p2w,r619ac-128m |\
p2w,r619ac |\
qcom,ap-dk01.1-c1)
caldata_extract "ART" 0x1000 0x2f20
;;
aruba,ap-303 |\
aruba,ap-303h |\
aruba,ap-365)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
;;
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x1000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
;;
cellc,rtl30vw |\
compex,wpj419 |\
compex,wpj428 |\
edgecore,ecw5211 |\
edgecore,oap100 |\
engenius,eap1300 |\
engenius,eap2200 |\
luma,wrtq-329acn|\
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)
caldata_extract "0:ART" 0x1000 0x2f20
;;
devolo,magic-2-wifi-next)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
;;
dlink,dap-2610)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
;;
engenius,emd1)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
;;
engenius,emr3500)
caldata_extract "0:ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
;;
engenius,ens620ext)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
;;
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
pangu,l1000)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
caldata_extract_ubi "ART" 0x1000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
;;
esac
;;
"ath10k/pre-cal-ahb-a800000.wifi.bin")
case "$board" in
8dev,habanero-dvk |\
8dev,jalapeno |\
alfa-network,ap120c-ac |\
cilab,meshpoint-one |\
ezviz,cs-w3-wd1200g-eup |\
glinet,gl-b1300 |\
glinet,gl-s1300 |\
linksys,ea6350v3 |\
p2w,r619ac-128m |\
p2w,r619ac |\
mobipromo,cm520-79f |\
qcom,ap-dk01.1-c1)
caldata_extract "ART" 0x5000 0x2f20
;;
aruba,ap-303 |\
aruba,ap-303h |\
aruba,ap-365)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
;;
asus,map-ac2200)
caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
caldata_extract_ubi "Factory" 0x5000 0x2f20
;;
avm,fritzbox-4040)
/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
;;
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000)
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
;;
buffalo,wtr-m2133hp)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
;;
cellc,rtl30vw |\
compex,wpj419 |\
compex,wpj428 |\
edgecore,ecw5211 |\
edgecore,oap100 |\
engenius,eap1300 |\
engenius,eap2200 |\
luma,wrtq-329acn|\
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200 |\
qxwlan,e2600ac-c1 |\
qxwlan,e2600ac-c2 |\
unielec,u4019-32m)
caldata_extract "0:ART" 0x5000 0x2f20
;;
devolo,magic-2-wifi-next)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
;;
dlink,dap-2610)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
;;
engenius,emd1)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
;;
engenius,emr3500)
caldata_extract "0:ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
;;
engenius,ens620ext)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
;;
linksys,ea8300 |\
linksys,mr8300)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
;;
pangu,l1000)
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
;;
meraki,mr33)
caldata_extract_ubi "ART" 0x5000 0x2f20
caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
;;
netgear,ex6100v2 |\
netgear,ex6150v2)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
;;
zyxel,nbg6617 |\
zyxel,wre6606)
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
;;
esac
;;
*)
exit 1
;;
esac

7
root/target/linux/ipq40xx/base-files/etc/hotplug.d/net/21_adjust_network
View file

@ -1,7 +0,0 @@
#!/bin/sh
[ -f /lib/adjust_network.sh ] && {
. /lib/adjust_network.sh
adjust_eth_queue
}

205
root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network
View file

@ -1,205 +0,0 @@
#!/bin/sh /etc/rc.common
# Copyright (C) 2006-2011 OpenWrt.org
START=99
STOP=98
rps_flow_cnt=4096
core_count=$(grep -c processor /proc/cpuinfo)
rps_sock_flow_ent=`expr $core_count \* $rps_flow_cnt`
queue_cores="0 1 2"
queue_irq_cores="1 2"
wifi_core="3"
usb_core="0"
############### util functions ###############
to_hex_list() {
local cores=$1
local converted=""
for core in $(echo $cores | awk '{print}')
do
local hex="$(gen_hex_mask "$core")"
converted="$converted $hex"
done
echo `echo $converted | sed 's/^ *//'`
}
gen_hex_mask() {
local cores=$1
local mask=0
for core in $(echo $cores | awk '{print}')
do
local bit="$((1 << $core))"
let "mask = mask + bit"
done
local hex="$(printf %x "$mask")"
echo "$hex"
}
val_at_index() {
local values=$1
local idx=$2
echo `echo $values | awk -v i=$idx '{print $i}'`
}
size_of_list() {
local list=$1
local spaces=`echo $list | grep -o ' ' | wc -l`
echo `expr $spaces + 1`
}
set_core_mask() {
local file=$1
local cores=$2
local mask="$(gen_hex_mask "$cores")"
echo $mask > $file
}
set_core_mask_round() {
local files=$1
local cores=$2
local step_size=$3
[ ! -n "$3" ] && step_size=1
local core_count="$(size_of_list "$cores")"
local counter=0
local idx=1
local roof=`expr $core_count \* $step_size`
for file in $(echo $files | awk '{print}')
do
let "idx = counter / step_size + 1"
local core="$(val_at_index "$cores" $idx)"
set_core_mask $file $core
let "counter = counter + 1"
[ $counter -ge $roof ] && counter=0
done
}
############### assign network queues ###############
set_interface_round() {
local interface=$1
local cores=$2
local step_size=$3
[ ! -n "$3" ] && step_size=1
echo "using round mask for interface: $interface, step size: $step_size"
set_core_mask_round "$(ls /sys/class/net/$interface/queues/tx-*/xps_cpus)" "$cores" $step_size
set_core_mask_round "$(ls /sys/class/net/$interface/queues/rx-*/rps_cpus)" "$cores" $step_size
for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_flow_cnt
do
echo $rps_flow_cnt > $file
done
}
set_interface() {
local interface=$1
local cores=$2
echo "using cores: $cores for interface: $interface"
for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_cpus
do
set_core_mask $file "$cores"
echo $rps_flow_cnt > `dirname $file`/rps_flow_cnt
done
for file in /sys/class/net/$interface/queues/tx-[0-9]*/xps_cpus
do
set_core_mask $file "$cores"
done
}
set_interface_queues() {
echo "using cpu: $queue_cores for network queues"
for dev in /sys/class/net/eth*
do
[ -d "$dev" ] || continue
local interface=`basename $dev`
set_interface $interface "$queue_cores"
done
for dev in /sys/class/net/wlan*
do
[ -d "$dev" ] || continue
local interface=`basename $dev`
set_interface $interface "$queue_cores"
done
for dev in /sys/class/net/eth*
do
local eth=`basename $dev`
echo "enabling offload on $eth"
ethtool -K $eth rx-checksum on >/dev/null 2>&1
ethtool -K $eth tx-checksum-ip-generic on >/dev/null 2>&1 || (
ethtool -K $eth tx-checksum-ipv4 on >/dev/null 2>&1
ethtool -K $eth tx-checksum-ipv6 on >/dev/null 2>&1)
ethtool -K $eth tx-scatter-gather on >/dev/null 2>&1
ethtool -K $eth gso on >/dev/null 2>&1
ethtool -K $eth gro on >/dev/null 2>&1
ethtool -K $eth lro on >/dev/null 2>&1
ethtool -K $eth tso on >/dev/null 2>&1
ethtool -K $eth ufo on >/dev/null 2>&1
done
echo $rps_sock_flow_ent > /proc/sys/net/core/rps_sock_flow_entries
sysctl -w net.core.rps_sock_flow_entries=$rps_sock_flow_ent
}
############### assign interrupts ###############
set_irq_cores() {
local mask="$(gen_hex_mask "$2")"
echo "set mask $mask for irq: $1"
echo $mask > "/proc/irq/$1/smp_affinity"
}
set_irq_pattern() {
local name_pattern="$1"
local cores="$2"
for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
do
set_irq_cores $irq "$cores"
done
}
set_irq_interleave() {
local name_pattern=$1
local cores=$2
local step_size=$3
local files=""
for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
do
files="$files\
/proc/irq/$irq/smp_affinity"
done
set_core_mask_round "$files" "$cores" "$step_size"
}
set_irqs() {
#dma
set_irq_pattern bam_dma "$usb_core"
#ethernet
set_irq_interleave eth_tx "$queue_irq_cores" 4
set_irq_interleave eth_rx "$queue_irq_cores" 1
#pcie
set_irq_pattern pcie "$wifi_core"
#usb
set_irq_pattern usb "$usb_core"
}
start() {
set_interface_queues
set_irqs
}

16
root/target/linux/ipq40xx/base-files/etc/init.d/bootcount
View file

@ -1,16 +0,0 @@
#!/bin/sh /etc/rc.common
START=99
boot() {
case $(board_name) in
alfa-network,ap120c-ac)
[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
;;
linksys,ea6350v3|\
linksys,ea8300)
mtd resetbc s_env || true
;;
esac
}

5
root/target/linux/ipq40xx/base-files/etc/inittab
View file

@ -1,5 +0,0 @@
# Copyright (c) 2013 The Linux Foundation. All rights reserved.
::sysinit:/etc/init.d/rcS S boot
::shutdown:/etc/init.d/rcS K shutdown
ttyMSM0::askfirst:/usr/libexec/login.sh
ttyMSM1::askfirst:/usr/libexec/login.sh

19
root/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
View file

@ -1,19 +0,0 @@
. /lib/functions/migrations.sh
board=$(board_name)
case "$board" in
engenius,emr3500)
migrate_leds "emr3500:="
;;
engenius,ens620ext|\
zyxel,nbg6617)
migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
;;
esac
remove_devicename_leds
migrations_apply system
exit 0

89
root/target/linux/ipq40xx/base-files/lib/adjust_network.sh
View file

@ -1,89 +0,0 @@
#!/bin/sh
# this scripts is used for adjust cpu's choice of interrupts.
#
################################################
# Adjust smp_affinity of edma
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_edma_smp_affinity() {
grep -q edma_eth_ /proc/interrupts || return 0
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local cpu=0
local tx_irq_num
for tx_num in `seq 0 1 15` ; do
cpu=`printf "%x" $((1<<((tx_num/4+0)%nr)))`
tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
done
for rx_num in `seq 0 1 7` ; do
cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
done
}
################################################
# Adjust smp_affinity of ath10k for 2G and 5G
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# execute only once on start-up.
################################################
adjust_radio_smp_affinity() {
local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=2
for irq in $irqs; do
cpu=`printf "%x" $((1<<((idx)%nr)))`
echo $cpu > /proc/irq/$irq/smp_affinity
idx=$((idx+1))
done
}
################################################
# Adjust queue of eth
# Globals:
# None
# Arguments:
# None
# Returns:
# None
# Remark:
# Each network reboot needs to be executed.
################################################
adjust_eth_queue() {
local nr=`cat /proc/cpuinfo | grep processor | wc -l`
local idx=0
for epath in /sys/class/net/eth[0-9]*; do
test -e $epath || break
echo $epath | grep -q "\." && continue
eth=`basename $epath`
idx=0
for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
test -e $exps || break
cpu=`printf "%x" $((1<<((idx+1)%nr)))`
idx=$((idx+1))
echo $cpu > $exps
echo 256 > `dirname $exps`/rps_flow_cnt
done
which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
done
echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
}

35
root/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
View file

@ -1,35 +0,0 @@
. /lib/functions.sh
preinit_set_mac_address() {
case $(board_name) in
asus,map-ac2200)
base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
;;
ezviz,cs-w3-wd1200g-eup)
ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
ip link set dev eth1 address $(mtd_get_mac_binary "ART" 0x0)
;;
engenius,eap2200)
base_mac=$(cat /sys/class/net/eth0/address)
ip link set dev eth1 address $(macaddr_add "${base_mac}" +1)
;;
linksys,ea8300|\
linksys,mr8300)
base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ip link set dev eth0 address "${base_mac}"
ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
;;
meraki,mr33)
mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
;;
zyxel,nbg6617)
base_mac=$(cat /sys/class/net/eth0/address)
ip link set dev eth0 address $(macaddr_add "$base_mac" +2)
ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
esac
}
boot_hook_add preinit_main preinit_set_mac_address

22
root/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
View file

@ -1,22 +0,0 @@
set_preinit_iface() {
. /lib/functions.sh
case $(board_name) in
aruba,ap-303| \
asus,rt-ac58u| \
avm,fritzbox-4040| \
ezviz,cs-w3-wd1200g-eup| \
glinet,gl-b1300| \
linksys,ea8300| \
linksys,mr8300| \
meraki,mr33| \
zyxel,nbg6617)
ifname=eth0
;;
devolo,magic-2-wifi-next)
ifname=eth1
;;
esac
}
boot_hook_add preinit_main set_preinit_iface

122
root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
View file

@ -1,122 +0,0 @@
linksys_get_target_firmware() {
local cur_boot_part mtd_ubi0
cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
if [ -z "${cur_boot_part}" ]; then
mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
kernel|rootfs)
cur_boot_part=1
;;
alt_kernel|alt_rootfs)
cur_boot_part=2
;;
esac
>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
"${cur_boot_part}" "${mtd_ubi0}"
fi
# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
# if test $auto_recovery = no;
# then bootipq;
# elif test $boot_part = 1;
# then run bootpart1;
# else run bootpart2;
# fi
case "$cur_boot_part" in
1)
fw_setenv -s - <<-EOF
boot_part 2
auto_recovery yes
EOF
printf "alt_kernel"
return
;;
2)
fw_setenv -s - <<-EOF
boot_part 1
auto_recovery yes
EOF
printf "kernel"
return
;;
*)
return
;;
esac
}
linksys_get_root_magic() {
(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
}
platform_do_upgrade_linksys() {
local magic_long="$(get_magic_long "$1")"
local rm_oem_fw_vols="squashfs ubifs" # from OEM [alt_]rootfs UBI
local vol
mkdir -p /var/lock
local part_label="$(linksys_get_target_firmware)"
touch /var/lock/fw_printenv.lock
if [ -z "$part_label" ]; then
echo "cannot find target partition"
exit 1
fi
local target_mtd=$(find_mtd_part "$part_label")
[ "$magic_long" = "73797375" ] && {
CI_KERNPART="$part_label"
if [ "$part_label" = "kernel" ]; then
CI_UBIPART="rootfs"
else
CI_UBIPART="alt_rootfs"
fi
local mtdnum="$(find_mtd_index "$CI_UBIPART")"
if [ ! "$mtdnum" ]; then
echo "cannot find ubi mtd partition $CI_UBIPART"
return 1
fi
local ubidev="$(nand_find_ubi "$CI_UBIPART")"
if [ ! "$ubidev" ]; then
ubiattach -m "$mtdnum"
sync
ubidev="$(nand_find_ubi "$CI_UBIPART")"
fi
if [ "$ubidev" ]; then
for vol in $rm_oem_fw_vols; do
ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
done
fi
# complete std upgrade
nand_upgrade_tar "$1"
}
[ "$magic_long" = "27051956" ] && {
# This magic is for a uImage (which is a sysupgrade image)
# check firmwares' rootfs types
local oldroot="$(linksys_get_root_magic "$target_mtd")"
local newroot="$(linksys_get_root_magic "$1")"
if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
# we're upgrading from a firmware with UBI to one with UBI
# erase everything to be safe
# - Is that really needed? Won't remove (or comment) the if,
# because it may be needed in a future device.
#mtd erase $part_label
#get_image "$1" | mtd -n write - $part_label
echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
get_image "$1" | mtd write - "$part_label"
else
echo "writing \"$1\" image to \"$part_label\""
get_image "$1" | mtd write - "$part_label"
fi
}
}

106
root/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
View file

@ -1,106 +0,0 @@
# The U-Boot loader of the OpenMesh devices requires image sizes and
# checksums to be provided in the U-Boot environment.
# The OpenMesh devices come with 2 main partitions - while one is active
# sysupgrade will flash the other. The boot order is changed to boot the
# newly flashed partition. If the new partition can't be booted due to
# upgrade failures the previously used partition is loaded.
platform_do_upgrade_openmesh() {
local tar_file="$1"
local restore_backup
local primary_kernel_mtd
local setenv_script="/tmp/fw_env_upgrade"
local kernel_mtd="$(find_mtd_index $PART_NAME)"
local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
# detect to which flash region the new image is written to.
#
# 1. check what is the mtd index for the first flash region on this
# device
# 2. check if the target partition ("inactive") has the mtd index of
# the first flash region
#
# - when it is: the new bootseq will be 1,2 and the first region is
# modified
# - when it isnt: bootseq will be 2,1 and the second region is
# modified
#
# The detection has to be done via the hardcoded mtd partition because
# the current boot might be done with the fallback region. Let us
# assume that the current bootseq is 1,2. The bootloader detected that
# the image in flash region 1 is corrupt and thus switches to flash
# region 2. The bootseq in the u-boot-env is now still the same and
# the sysupgrade code can now only rely on the actual mtd indexes and
# not the bootseq variable to detect the currently booted flash
# region/image.
#
# In the above example, an implementation which uses bootseq ("1,2") to
# detect the currently booted image would assume that region 1 is booted
# and then overwrite the variables for the wrong flash region (aka the
# one which isn't modified). This could result in a device which doesn't
# boot anymore to Linux until it was reflashed with ap51-flash.
local next_boot_part="1"
case "$(board_name)" in
openmesh,a42)
primary_kernel_mtd=8
;;
openmesh,a62)
primary_kernel_mtd=10
;;
*)
echo "failed to detect primary kernel mtd partition for board"
return 1
;;
esac
[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
# rootfs without EOF marker
rootfs_length=$((rootfs_length-4))
local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
# md5 checksum of rootfs with EOF marker
local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
#
# add tar support to get_image() to use default_do_upgrade() instead?
#
# take care of restoring a saved config
[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
mtd -q erase inactive
tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
# prepare new u-boot env
if [ "$next_boot_part" = "1" ]; then
echo "bootseq 1,2" > $setenv_script
else
echo "bootseq 2,1" > $setenv_script
fi
printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
# store u-boot env changes
mkdir -p /var/lock
fw_setenv -s $setenv_script || {
echo "failed to update U-Boot environment"
return 1
}
}

128
root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
View file

@ -1,128 +0,0 @@
PART_NAME=firmware
REQUIRE_IMAGE_METADATA=1
RAMFS_COPY_BIN='fw_printenv fw_setenv'
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
platform_check_image() {
case "$(board_name)" in
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
local ubidev=$(nand_find_ubi $CI_UBIPART)
local asus_root=$(nand_find_volume $ubidev jffs2)
[ -n "$asus_root" ] || return 0
cat << EOF
jffs2 partition is still present.
There's probably no space left
to install the filesystem.
You need to delete the jffs2 partition first:
# ubirmvol /dev/ubi0 --name=jffs2
Once this is done. Retry.
EOF
return 1
;;
esac
return 0;
}
askey_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
nand_do_upgrade "$1"
}
zyxel_do_upgrade() {
local tar_file="$1"
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
board_dir=${board_dir%/}
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
if [ -n "$UPGRADE_BACKUP" ]; then
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
else
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
fi
}
platform_do_upgrade() {
case "$(board_name)" in
pangu,l1000 |\
8dev,jalapeno |\
aruba,ap-303 |\
aruba,ap-303h |\
aruba,ap-365 |\
avm,fritzbox-7530 |\
avm,fritzrepeater-1200 |\
avm,fritzrepeater-3000 |\
buffalo,wtr-m2133hp |\
cilab,meshpoint-one |\
edgecore,ecw5211 |\
edgecore,oap100 |\
engenius,eap2200 |\
luma,wrtq-329acn |\
mobipromo,cm520-79f |\
qxwlan,e2600ac-c2)
nand_do_upgrade "$1"
;;
alfa-network,ap120c-ac)
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
if [ "$part" = "rootfs1" ]; then
fw_setenv active 2 || exit 1
CI_UBIPART="rootfs2"
else
fw_setenv active 1 || exit 1
CI_UBIPART="rootfs1"
fi
nand_do_upgrade "$1"
;;
asus,map-ac2200)
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
asus,rt-ac58u)
CI_UBIPART="UBI_DEV"
CI_KERNPART="linux"
nand_do_upgrade "$1"
;;
cellc,rtl30vw)
CI_UBIPART="ubifs"
askey_do_upgrade "$1"
;;
compex,wpj419)
nand_do_upgrade "$1"
;;
linksys,ea6350v3 |\
linksys,ea8300 |\
linksys,mr8300)
platform_do_upgrade_linksys "$1"
;;
meraki,mr33)
CI_KERNPART="part.safe"
nand_do_upgrade "$1"
;;
openmesh,a42 |\
openmesh,a62 |\
plasmacloud,pa1200 |\
plasmacloud,pa2200)
PART_NAME="inactive"
platform_do_upgrade_dualboot_datachk "$1"
;;
zyxel,nbg6617)
zyxel_do_upgrade "$1"
;;
*)
default_do_upgrade "$1"
;;
esac
}

394
root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
View file

@ -1,394 +0,0 @@
/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
*
* Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
*
*/
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
model = "ANTROUTERGZ1000";
compatible = "pangu,l1000", "qcom,ipq4019";
memory {
device_type = "memory";
reg = <0x80000000 0x20000000>; /* 512MB */
};
aliases {
sdhc1 = &sdhci;
led-boot = &power;
led-failsafe = &power;
led-running = &power;
led-upgrade = &power;
};
chosen {
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
reset-delay-us = <2000>;
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
/* select hostmode */
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
status = "okay";
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
switch_lan_bmp = <0x18>;
switch_wan_bmp = <0x20>;
};
i2c@78b7000 { /* BLSP1 QUP2 */
pinctrl-0 = <&i2c_0_pins>;
pinctrl-names = "default";
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
leds {
compatible = "gpio-leds";
power: status {
label = "blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
};
wlan5g {
label = "bule:wlan5g";
gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
};
wan {
label = "bule:wan";
gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
};
usb {
label = "bule::usb";
gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
trigger-sources = <&usb2>, <&usb3>;
linux,default-trigger = "usbport";
};
};
};
&vqmmc {
status = "okay";
};
&sdhci {
status = "okay";
pinctrl-0 = <&sd_pins>;
pinctrl-names = "default";
cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&vqmmc>;
};
&blsp_dma {
status = "okay";
};
&cryptobam {
status = "okay";
};
&blsp1_spi1 {
pinctrl-0 = <&spi_0_pins>;
pinctrl-names = "default";
status = "okay";
cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
SBL1@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
MIBIB@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
};
QSEE@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
CDT@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
DDRPARAMS@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
APPSBLENV@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
};
APPSBL@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
};
ART@170000 {
label = "ART";
reg = <0x170000 0x10000>;
};
};
};
};
&nand {
pinctrl-0 = <&nand_pins>;
pinctrl-names = "default";
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
rootfs@0 {
label = "rootfs";
reg = <0x0 0x8000000>;
};
};
};
};
&qpic_bam {
status = "okay";
};
&blsp1_uart1 {
pinctrl-0 = <&serial_pins>;
pinctrl-names = "default";
status = "okay";
};
&blsp1_uart2 {
pinctrl-0 = <&serial_1_pins>;
pinctrl-names = "default";
status = "okay";
};
&tlmm {
serial_pins: serial_pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
serial_1_pins: serial1_pinmux {
mux {
pins = "gpio8", "gpio9",
"gpio10", "gpio11";
function = "blsp_uart1";
bias-disable;
};
};
i2c_0_pins: i2c-0-pinmux {
mux {
pins = "gpio20", "gpio21";
function = "blsp_i2c0";
bias-disable;
};
};
spi_0_pins: spi_0_pinmux {
pinmux {
function = "blsp_spi0";
pins = "gpio13", "gpio14", "gpio15";
};
pinmux_cs {
function = "gpio";
pins = "gpio12";
};
pinconf {
pins = "gpio13", "gpio14", "gpio15";
drive-strength = <12>;
bias-disable;
};
pinconf_cs {
pins = "gpio12";
drive-strength = <2>;
bias-disable;
output-high;
};
};
nand_pins: nand_pins {
pullups {
pins = "gpio52", "gpio53", "gpio58",
"gpio59";
function = "qpic";
bias-pull-up;
};
pulldowns {
pins = "gpio54", "gpio55", "gpio56",
"gpio57", "gpio60", "gpio61",
"gpio62", "gpio63", "gpio64",
"gpio65", "gpio66", "gpio67",
"gpio68", "gpio69";
function = "qpic";
bias-pull-down;
};
};
sd_pins: sd_pins {
pinmux {
function = "sdio";
pins = "gpio23", "gpio24", "gpio25", "gpio26",
"gpio28", "gpio29", "gpio30", "gpio31";
drive-strength = <10>;
};
pinmux_sd_clk {
function = "sdio";
pins = "gpio27";
drive-strength = <16>;
};
pinmux_sd7 {
function = "sdio";
pins = "gpio32";
drive-strength = <10>;
bias-disable;
};
};
};
&usb2_hs_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb3_ss_phy {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "PANGU-L1000";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "PANGU-L1000";
};

18
root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts
View file

@ -1,18 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-r619ac.dtsi"
/ {
model = "P&W R619AC 128M";
compatible = "p2w,r619ac-128m";
chosen {
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
};
};
&rootfs_part1 {
reg = <0x0 0x8000000>;
};
/delete-node/ &rootfs_part2;

12
root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts
View file

@ -1,12 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019-r619ac.dtsi"
/ {
model = "P&W R619AC";
compatible = "p2w,r619ac";
chosen {
bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
};
};

322
root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
View file

@ -1,322 +0,0 @@
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qcom-ipq4019.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/soc/qcom,tcsr.h>
/ {
aliases {
led-boot = &led_sys;
led-failsafe = &led_sys;
led-running = &led_sys;
led-upgrade = &led_sys;
label-mac-device = &gmac0;
};
soc {
rng@22000 {
status = "okay";
};
mdio@90000 {
status = "okay";
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
};
ess-psgmii@98000 {
status = "okay";
};
tcsr@1949000 {
compatible = "qcom,tcsr";
reg = <0x1949000 0x100>;
qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
};
tcsr@194b000 {
compatible = "qcom,tcsr";
reg = <0x194b000 0x100>;
qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
};
ess_tcsr@1953000 {
compatible = "qcom,tcsr";
reg = <0x1953000 0x1000>;
qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
};
tcsr@1957000 {
compatible = "qcom,tcsr";
reg = <0x1957000 0x100>;
qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
};
usb2@60f8800 {
status = "okay";
};
usb3@8af8800 {
status = "okay";
};
crypto@8e3a000 {
status = "okay";
};
watchdog@b017000 {
status = "okay";
};
ess-switch@c000000 {
status = "okay";
};
edma@c080000 {
status = "okay";
};
};
leds {
compatible = "gpio-leds";
pinctrl-0 = <&led_pins>;
pinctrl-names = "default";
led_sys: sys {
label = "blue:sys";
gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
};
wlan2g {
label = "blue:wlan2g";
gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tpt";
};
wlan5g {
label = "blue:wlan5g";
gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy1tpt";
};
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
};
&blsp_dma {
status = "okay";
};
&blsp1_spi1 {
status = "okay";
flash@0 {
reg = <0>;
compatible = "jedec,spi-nor";
spi-max-frequency = <24000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "SBL1";
reg = <0x0 0x40000>;
read-only;
};
partition@40000 {
label = "MIBIB";
reg = <0x40000 0x20000>;
read-only;
};
partition@60000 {
label = "QSEE";
reg = <0x60000 0x60000>;
read-only;
};
partition@c0000 {
label = "CDT";
reg = <0xc0000 0x10000>;
read-only;
};
partition@d0000 {
label = "DDRPARAMS";
reg = <0xd0000 0x10000>;
read-only;
};
partition@e0000 {
label = "APPSBLENV";
reg = <0xe0000 0x10000>;
read-only;
};
partition@f0000 {
label = "APPSBL";
reg = <0xf0000 0x80000>;
read-only;
};
partition@1 {
label = "Bootloader";
reg = <0x0 0x170000>;
read-only;
};
partition@170000 {
label = "ART";
reg = <0x170000 0x10000>;
read-only;
};
partition@180000 {
label = "unused";
reg = <0x180000 0xe80000>;
};
};
};
};
&blsp1_uart1 {
pinctrl-0 = <&serial_0_pins>;
pinctrl-names = "default";
status = "okay";
};
&cryptobam {
status = "okay";
};
&nand {
status = "okay";
nand@0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
rootfs_part1: partition@0 {
label = "rootfs";
reg = <0x0 0x4000000>;
};
rootfs_part2: partition@4000000 {
label = "unused1";
reg = <0x4000000 0x4000000>;
};
};
};
};
&qpic_bam {
status = "okay";
};
&sdhci {
pinctrl-0 = <&sd_0_pins>;
pinctrl-names = "default";
vqmmc-supply = <&vqmmc>;
status = "okay";
};
&tlmm {
mdio_pins: mdio_pinmux {
mux_1 {
pins = "gpio6";
function = "mdio";
bias-pull-up;
};
mux_2 {
pins = "gpio7";
function = "mdc";
bias-pull-up;
};
};
sd_0_pins: sd_0_pinmux {
mux_1 {
pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28";
function = "sdio";
drive-strength = <10>;
};
mux_2 {
pins = "gpio27";
function = "sdio";
drive-strength = <16>;
};
};
serial_0_pins: serial0-pinmux {
mux {
pins = "gpio16", "gpio17";
function = "blsp_uart0";
bias-disable;
};
};
led_pins: led_pinmux {
mux {
pins = "gpio32", "gpio39", "gpio50";
function = "gpio";
bias-pull-up;
output-low;
};
mux_1 {
pins = "gpio52";
function = "gpio";
bias-pull-up;
output-high;
};
mux_2 {
pins = "gpio61";
function = "gpio";
bias-pull-down;
output-high;
};
};
};
&usb3_ss_phy {
status = "okay";
};
&usb3_hs_phy {
status = "okay";
};
&usb2_hs_phy {
status = "okay";
};
&vqmmc {
status = "okay";
};
&wifi0 {
status = "okay";
qcom,ath10k-calibration-variant = "R619AC";
};
&wifi1 {
status = "okay";
qcom,ath10k-calibration-variant = "R619AC";
};

867
root/target/linux/ipq40xx/image/Makefile
View file

@ -1,867 +0,0 @@
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
define Device/Default
PROFILES := Default
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
KERNEL_PREFIX := $$(IMAGE_PREFIX)
KERNEL_LOADADDR := 0x80208000
DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
IMAGE/sysupgrade.bin/squashfs :=
endef
define Device/FitImage
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitImageLzma
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := Image
endef
define Device/FitzImage
KERNEL_SUFFIX := -fit-zImage.itb
KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL_NAME := zImage
endef
define Device/UbiFit
KERNEL_IN_UBI := 1
IMAGES := nand-factory.ubi nand-sysupgrade.bin
IMAGE/nand-factory.ubi := append-ubi
IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
endef
define Device/DniImage
$(call Device/FitzImage)
NETGEAR_BOARD_ID :=
NETGEAR_HW_ID :=
IMAGES += factory.img
IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
append-rootfs | pad-rootfs | append-metadata | check-size
endef
define Build/append-rootfshdr
mkimage -A $(LINUX_KARCH) \
-O linux -T filesystem \
-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
endef
define Build/mkmylofw_32m
$(eval device_id=$(word 1,$(1)))
$(eval revision=$(word 2,$(1)))
let \
size="$$(stat -c%s $@)" \
pad="$(subst k,* 1024,$(BLOCKSIZE))" \
pad="(pad - (size % pad)) % pad" \
newsize='size + pad'; \
$(STAGING_DIR_HOST)/bin/mkmylofw \
-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
$@.new
@mv $@.new $@
endef
define Build/qsdk-ipq-factory-nand-askey
$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
askey_kernel $(IMAGE_KERNEL) \
askey_fs $(IMAGE_ROOTFS) \
ubifs $@
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
@mv $@.new $@
endef
define Build/SenaoFW
-$(STAGING_DIR_HOST)/bin/mksenaofw \
-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
-e $@ \
-o $@.new
@cp $@.new $@
endef
define Build/wrgg-image
mkwrggimg -i $@ \
-o $@.new \
-d "$(WRGG_DEVNAME)" \
-s "$(WRGG_SIGNATURE)" \
-v "" -m "" -B ""
mv $@.new $@
endef
define Device/8dev_habanero-dvk
$(call Device/FitImageLzma)
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Habanero DVK
IMAGE_SIZE := 30976k
SOC := qcom-ipq4019
DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
endef
TARGET_DEVICES += 8dev_habanero-dvk
define Device/8dev_jalapeno-common
$(call Device/FitImage)
$(call Device/UbiFit)
BLOCKSIZE := 128k
PAGESIZE := 2048
SOC := qcom-ipq4018
endef
define Device/8dev_jalapeno
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := 8devices
DEVICE_MODEL := Jalapeno
endef
TARGET_DEVICES += 8dev_jalapeno
define Device/alfa-network_ap120c-ac
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := ALFA Network
DEVICE_MODEL := AP120C-AC
SOC := qcom-ipq4018
DEVICE_PACKAGES := kmod-usb-acm \
kmod-tpm-i2c-atmel uboot-envtools
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGE_SIZE := 65536k
IMAGES := nand-factory.bin nand-sysupgrade.bin
IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
endef
TARGET_DEVICES += alfa-network_ap120c-ac
define Device/aruba_glenmorangie
$(call Device/FitImageLzma)
DEVICE_VENDOR := Aruba
SOC := qcom-ipq4029
DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
endef
define Device/aruba_ap-303
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-303
endef
TARGET_DEVICES += aruba_ap-303
define Device/aruba_ap-303h
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-303H
endef
TARGET_DEVICES += aruba_ap-303h
define Device/aruba_ap-365
$(call Device/aruba_glenmorangie)
DEVICE_MODEL := AP-365
DEVICE_PACKAGES += kmod-hwmon-ad7418
endef
TARGET_DEVICES += aruba_ap-365
define Device/asus_map-ac2200
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := Lyra (MAP-AC2200)
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
endef
TARGET_DEVICES += asus_map-ac2200
define Device/asus_rt-ac58u
$(call Device/FitImageLzma)
DEVICE_VENDOR := ASUS
DEVICE_MODEL := RT-AC58U
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
DTB_SIZE := 65536
IMAGE_SIZE := 20439364
FILESYSTEMS := squashfs
# Someone - in their infinite wisdom - decided to put the firmware
# version in front of the image name \03\00\00\04 => Version 3.0.0.4
# Since u-boot works with strings we either need another fixup step
# to add a version... or we are very careful not to add '\0' into that
# string and call it a day.... Yeah, we do the latter!
UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += asus_rt-ac58u
define Device/avm_fritzbox-4040
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 4040
SOC := qcom-ipq4018
BOARD_NAME := fritz4040
IMAGE_SIZE := 29056k
UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
UBOOT_PARTITION_SIZE := 524288
IMAGES += eva.bin
IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := fritz-tffs fritz-caldata
endef
TARGET_DEVICES += avm_fritzbox-4040
define Device/avm_fritzbox-7530
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Box 7530
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzbox-7530
define Device/avm_fritzrepeater-1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 1200
SOC := qcom-ipq4019
DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
endef
TARGET_DEVICES += avm_fritzrepeater-1200
define Device/avm_fritzrepeater-3000
$(call Device/FitImageLzma)
DEVICE_VENDOR := AVM
DEVICE_MODEL := FRITZ!Repeater 3000
SOC := qcom-ipq4019
DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
endef
TARGET_DEVICES += avm_fritzrepeater-3000
define Device/buffalo_wtr-m2133hp
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Buffalo
DEVICE_MODEL := WTR-M2133HP
SOC := qcom-ipq4019
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += buffalo_wtr-m2133hp
define Device/cellc_rtl30vw
KERNEL_SUFFIX := -fit-uImage.itb
KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
KERNEL_NAME := Image
KERNEL_IN_UBI :=
IMAGES := nand-factory.bin nand-sysupgrade.bin
IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
DEVICE_VENDOR := Cell C
DEVICE_MODEL := RTL30VW
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@5
KERNEL_INSTALL := 1
KERNEL_SIZE := 4096k
IMAGE_SIZE := 57344k
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
endef
TARGET_DEVICES += cellc_rtl30vw
define Device/cilab_meshpoint-one
$(call Device/8dev_jalapeno-common)
DEVICE_VENDOR := Crisis Innovation Lab
DEVICE_MODEL := MeshPoint.One
DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
endef
TARGET_DEVICES += cilab_meshpoint-one
define Device/compex_wpj419
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ419
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@12
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
FILESYSTEMS := squashfs
endef
TARGET_DEVICES += compex_wpj419
define Device/compex_wpj428
$(call Device/FitImage)
DEVICE_VENDOR := Compex
DEVICE_MODEL := WPJ428
SOC := qcom-ipq4028
DEVICE_DTS_CONFIG := config@4
BLOCKSIZE := 64k
IMAGE_SIZE := 31232k
KERNEL_SIZE := 4096k
IMAGES += cpximg-6a04.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
DEVICE_PACKAGES := kmod-gpio-beeper
endef
TARGET_DEVICES += compex_wpj428
define Device/devolo_magic-2-wifi-next
$(call Device/FitImage)
DEVICE_VENDOR := devolo
DEVICE_MODEL := Magic 2 WiFi next
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
# it will bootm it, just like we want for the initramfs.
KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
endef
TARGET_DEVICES += devolo_magic-2-wifi-next
define Device/dlink_dap-2610
$(call Device/FitImageLzma)
DEVICE_VENDOR := D-Link
DEVICE_MODEL := DAP-2610
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
BLOCKSIZE := 64k
WRGG_DEVNAME := /dev/mtdblock/8
WRGG_SIGNATURE := wapac30_dkbs_dap2610
IMAGE_SIZE := 14080k
IMAGES += factory.bin
# Bootloader expects a special 160 byte header which is added by
# wrgg-image.
# Factory image size must be larger than 6MB, and size in wrgg header must
# match actual factory image size to be flashable from D-Link http server.
# Bootloader verifies checksum of wrgg image before booting, thus jffs2
# cannot be part of the wrgg image. This is solved in the factory image by
# having the rootfs at the end of the image (without pad-rootfs). And in
# the sysupgrade image only the kernel is included in the wrgg checksum,
# but this is not flashable from the D-link http server.
# append-rootfs must start on an erase block boundary.
IMAGE/factory.bin := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
endef
TARGET_DEVICES += dlink_dap-2610
define Device/edgecore_ecw5211
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := ECW5211
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
endef
TARGET_DEVICES += edgecore_ecw5211
define Device/edgecore_oap100
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Edgecore
DEVICE_MODEL := OAP100
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGES := nand-sysupgrade.bin
DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
endef
TARGET_DEVICES += edgecore_oap100
define Device/engenius_eap1300
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP1300
DEVICE_DTS_CONFIG := config@4
BOARD_NAME := eap1300
SOC := qcom-ipq4018
KERNEL_SIZE := 5120k
IMAGE_SIZE := 25344k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += engenius_eap1300
define Device/engenius_eap2200
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EAP2200
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += engenius_eap2200
define Device/engenius_emd1
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EMD1
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
IMAGE_SIZE := 30720k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
endef
TARGET_DEVICES += engenius_emd1
define Device/engenius_emr3500
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := EMR3500
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
IMAGE_SIZE := 30720k
IMAGES += factory.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
endef
TARGET_DEVICES += engenius_emr3500
define Device/engenius_ens620ext
$(call Device/FitImage)
DEVICE_VENDOR := EnGenius
DEVICE_MODEL := ENS620EXT
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@4
BLOCKSIZE := 64k
PAGESIZE := 256
BOARD_NAME := ENS620EXT
VENDOR_ID := 0x0101
PRODUCT_ID := 0x79
PRODUCT_ID_NEW := 0xA4
DATECODE := 190507
FW_VER := 3.1.2
FW_VER_NEW := 3.5.6
CW_VER := 1.8.99
IMAGE_SIZE := 21312k
KERNEL_SIZE := 5120k
FILESYSTEMS := squashfs
IMAGES += factory_30.bin factory_35.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
endef
TARGET_DEVICES += engenius_ens620ext
define Device/ezviz_cs-w3-wd1200g-eup
$(call Device/FitImage)
DEVICE_VENDOR := EZVIZ
DEVICE_MODEL := CS-W3-WD1200G
DEVICE_VARIANT := EUP
DEVICE_DTS_CONFIG := config@4
IMAGE_SIZE := 14848k
SOC := qcom-ipq4018
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
append-metadata
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
ipq-wifi-ezviz_cs-w3-wd1200g-eup
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
define Device/glinet_gl-b1300
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-B1300
BOARD_NAME := gl-b1300
SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += glinet_gl-b1300
define Device/glinet_gl-s1300
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet
DEVICE_MODEL := GL-S1300
SOC := qcom-ipq4029
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
endef
TARGET_DEVICES += glinet_gl-s1300
define Device/linksys_ea6350v3
# The Linksys EA6350v3 has a uboot bootloader that does not
# support either booting lzma kernel images nor booting UBI
# partitions. This uboot, however, supports raw kernel images and
# gzipped images.
#
# As for the time of writing this, the device will boot the kernel
# from a fixed address with a fixed length of 3MiB. Also, the
# device has a hard-coded kernel command line that requieres the
# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
# Oh... and the kernel partition overlaps with the rootfs
# partition (the same for alt_kernel and alt_rootfs).
#
# If you are planing re-partitioning the device, you may want to
# keep those details in mind:
# 1. The kernel adresses you should honor are 0x00000000 and
# 0x02800000 respectively.
# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
# 4. The kernel command line from uboot is harcoded to boot with
# rootfs either in mtd11 or mtd13.
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA6350
DEVICE_VARIANT := v3
SOC := qcom-ipq4018
BLOCKSIZE := 128k
PAGESIZE := 2048
KERNEL_SIZE := 3072k
IMAGE_SIZE := 37888k
UBINIZE_OPTS := -E 5
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += linksys_ea6350v3
define Device/linksys_ea8300
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := EA8300
SOC := qcom-ipq4019
KERNEL_SIZE := 3072k
IMAGE_SIZE := 87040k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_ea8300
define Device/linksys_mr8300
$(call Device/FitzImage)
DEVICE_VENDOR := Linksys
DEVICE_MODEL := MR8300
SOC := qcom-ipq4019
KERNEL_SIZE := 3072k
IMAGE_SIZE := 87040k
BLOCKSIZE := 128k
PAGESIZE := 2048
UBINIZE_OPTS := -E 5 # EOD marks to "hide" factory sig at EOF
IMAGES += factory.bin
IMAGE/factory.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += linksys_mr8300
define Device/luma_wrtq-329acn
$(call Device/FitImage)
DEVICE_VENDOR := Luma Home
DEVICE_MODEL := WRTQ-329ACN
SOC := qcom-ipq4018
DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
IMAGE_SIZE := 76632k
BLOCKSIZE := 128k
PAGESIZE := 2048
endef
TARGET_DEVICES += luma_wrtq-329acn
define Device/meraki_mr33
$(call Device/FitImage)
DEVICE_VENDOR := Cisco Meraki
DEVICE_MODEL := MR33
SOC := qcom-ipq4029
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
endef
TARGET_DEVICES += meraki_mr33
define Device/mobipromo_cm520-79f
$(call Device/FitzImage)
$(call Device/UbiFit)
DEVICE_VENDOR := MobiPromo
DEVICE_MODEL := CM520-79F
SOC := qcom-ipq4019
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += mobipromo_cm520-79f
define Device/netgear_ex61x0v2
$(call Device/DniImage)
DEVICE_VENDOR := NETGEAR
DEVICE_DTS_CONFIG := config@4
NETGEAR_BOARD_ID := EX6150v2series
NETGEAR_HW_ID := 29765285+16+0+128+2x2
IMAGE_SIZE := 14400k
SOC := qcom-ipq4018
endef
define Device/netgear_ex6100v2
$(call Device/netgear_ex61x0v2)
DEVICE_MODEL := EX6100
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6100v2
define Device/netgear_ex6150v2
$(call Device/netgear_ex61x0v2)
DEVICE_MODEL := EX6150
DEVICE_VARIANT := v2
endef
TARGET_DEVICES += netgear_ex6150v2
define Device/openmesh_a42
$(call Device/FitImageLzma)
DEVICE_VENDOR := OpenMesh
DEVICE_MODEL := A42
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@om.a42
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := uboot-envtools
endef
TARGET_DEVICES += openmesh_a42
define Device/openmesh_a62
$(call Device/FitImageLzma)
DEVICE_VENDOR := OpenMesh
DEVICE_MODEL := A62
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@om.a62
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
endef
TARGET_DEVICES += openmesh_a62
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
DEVICE_MODEL := PA1200
SOC := qcom-ipq4018
DEVICE_DTS_CONFIG := config@pc.pa1200
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15616k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
endef
TARGET_DEVICES += plasmacloud_pa1200
define Device/plasmacloud_pa2200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud
DEVICE_MODEL := PA2200
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@pc.pa2200
BLOCKSIZE := 64k
KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
IMAGE_SIZE := 15552k
IMAGES += factory.bin
IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
endef
TARGET_DEVICES += plasmacloud_pa2200
define Device/qcom_ap-dk01.1-c1
DEVICE_VENDOR := Qualcomm Atheros
DEVICE_MODEL := AP-DK01.1
DEVICE_VARIANT := C1
BOARD_NAME := ap-dk01.1-c1
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4096k
IMAGE_SIZE := 26624k
$(call Device/FitImage)
IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += qcom_ap-dk01.1-c1
define Device/qcom_ap-dk04.1-c1
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Qualcomm Atheros
DEVICE_MODEL := AP-DK04.1
DEVICE_VARIANT := C1
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
KERNEL_INSTALL := 1
KERNEL_SIZE := 4048k
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := ap-dk04.1-c1
endef
TARGET_DEVICES += qcom_ap-dk04.1-c1
define Device/pangu_l1000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := PANGU
DEVICE_MODEL := L1000
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-l1000
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := l1000
DEVICE_PACKAGES := ipq-wifi-pangu_l1000
endef
TARGET_DEVICES += pangu_l1000
define Device/p2w_r619ac
$(call Device/FitzImage)
$(call Device/UbiFit)
DEVICE_VENDOR := P&W
DEVICE_MODEL := R619AC
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@10
BLOCKSIZE := 128k
PAGESIZE := 2048
IMAGES += nand-factory.bin
IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
endef
TARGET_DEVICES += p2w_r619ac
define Device/p2w_r619ac-128m
$(call Device/FitzImage)
$(call Device/UbiFit)
DEVICE_VENDOR := P&W
DEVICE_MODEL := R619AC
DEVICE_VARIANT := 128M
SOC := qcom-ipq4019
DEVICE_DTS_CONFIG := config@10
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
endef
TARGET_DEVICES += p2w_r619ac-128m
define Device/pangu_l1000
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := PANGU
DEVICE_MODEL := L1000
SOC := qcom-ipq4019
DEVICE_DTS := qcom-ipq4019-l1000
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
BOARD_NAME := l1000
DEVICE_PACKAGES := ipq-wifi-pangu_l1000
endef
TARGET_DEVICES += pangu_l1000
define Device/qxwlan_e2600ac-c1
$(call Device/FitImage)
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E2600AC
DEVICE_VARIANT := C1
BOARD_NAME := e2600ac-c1
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c1
define Device/qxwlan_e2600ac-c2
$(call Device/FitImage)
$(call Device/UbiFit)
DEVICE_VENDOR := Qxwlan
DEVICE_MODEL := E2600AC
DEVICE_VARIANT := C2
SOC := qcom-ipq4019
KERNEL_INSTALL := 1
BLOCKSIZE := 128k
PAGESIZE := 2048
DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
endef
TARGET_DEVICES += qxwlan_e2600ac-c2
define Device/unielec_u4019-32m
$(call Device/FitImage)
DEVICE_VENDOR := Unielec
DEVICE_MODEL := U4019
DEVICE_VARIANT := 32M
BOARD_NAME := u4019-32m
SOC := qcom-ipq4019
KERNEL_SIZE := 4096k
IMAGE_SIZE := 31232k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
endef
TARGET_DEVICES += unielec_u4019-32m
define Device/zyxel_nbg6617
$(call Device/FitImageLzma)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := NBG6617
SOC := qcom-ipq4018
KERNEL_SIZE := 4096k
ROOTFS_SIZE := 24960k
RAS_BOARD := NBG6617
RAS_ROOTFS_SIZE := 19840k
RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
IMAGES += factory.bin
# The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
# at least as large as the one of the initial firmware image (not the current
# one on the device). This only applies to the Web-UI, the bootlaoder ignores
# this minimum-size. However, the larger image can be flashed both ways.
IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
endef
TARGET_DEVICES += zyxel_nbg6617
define Device/zyxel_wre6606
$(call Device/FitImage)
DEVICE_VENDOR := ZyXEL
DEVICE_MODEL := WRE6606
DEVICE_DTS_CONFIG := config@4
SOC := qcom-ipq4018
IMAGE_SIZE := 13184k
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
endef
TARGET_DEVICES += zyxel_wre6606
$(eval $(call BuildImage))

73
root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
View file

@ -1,73 +0,0 @@
From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Thu, 9 Mar 2017 11:03:18 +0100
Subject: [PATCH] arm: boot: add dts files
Signed-off-by: John Crispin <john@phrozen.org>
---
arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -837,11 +837,60 @@ dtb-$(CONFIG_ARCH_QCOM) += \
qcom-apq8074-dragonboard.dtb \
qcom-apq8084-ifc6540.dtb \
qcom-apq8084-mtp.dtb \
+ qcom-ipq4018-a42.dtb \
+ qcom-ipq4018-ap120c-ac.dtb \
+ qcom-ipq4018-dap-2610.dtb \
+ qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
+ qcom-ipq4018-magic-2-wifi-next.dtb \
+ qcom-ipq4018-ea6350v3.dtb \
+ qcom-ipq4018-eap1300.dtb \
+ qcom-ipq4018-ecw5211.dtb \
+ qcom-ipq4018-emd1.dtb \
+ qcom-ipq4018-emr3500.dtb \
+ qcom-ipq4018-ens620ext.dtb \
+ qcom-ipq4018-ex6100v2.dtb \
+ qcom-ipq4018-ex6150v2.dtb \
+ qcom-ipq4018-fritzbox-4040.dtb \
+ qcom-ipq4018-jalapeno.dtb \
+ qcom-ipq4018-meshpoint-one.dtb \
+ qcom-ipq4018-nbg6617.dtb \
+ qcom-ipq4019-oap100.dtb \
+ qcom-ipq4018-pa1200.dtb \
+ qcom-ipq4018-rt-ac58u.dtb \
+ qcom-ipq4018-wre6606.dtb \
+ qcom-ipq4018-wrtq-329acn.dtb \
qcom-ipq4019-ap.dk01.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c1.dtb \
qcom-ipq4019-ap.dk04.1-c3.dtb \
qcom-ipq4019-ap.dk07.1-c1.dtb \
qcom-ipq4019-ap.dk07.1-c2.dtb \
+ qcom-ipq4019-a62.dtb \
+ qcom-ipq4019-cm520-79f.dtb \
+ qcom-ipq4019-ea8300.dtb \
+ qcom-ipq4019-eap2200.dtb \
+ qcom-ipq4019-fritzbox-7530.dtb \
+ qcom-ipq4019-fritzrepeater-1200.dtb \
+ qcom-ipq4019-fritzrepeater-3000.dtb \
+ qcom-ipq4019-map-ac2200.dtb \
+ qcom-ipq4019-mr8300.dtb \
+ qcom-ipq4019-e2600ac-c1.dtb \
+ qcom-ipq4019-e2600ac-c2.dtb \
+ qcom-ipq4019-habanero-dvk.dtb \
+ qcom-ipq4019-pa2200.dtb \
+ qcom-ipq4019-rtl30vw.dtb \
+ qcom-ipq4019-u4019-32m.dtb \
+ qcom-ipq4019-wpj419.dtb \
+ qcom-ipq4019-wtr-m2133hp.dtb \
+ qcom-ipq4019-r619ac.dtb \
+ qcom-ipq4019-r619ac-128m.dtb \
+ qcom-ipq4019-l1000.dtb \
+ qcom-ipq4028-wpj428.dtb \
+ qcom-ipq4029-ap-303.dtb \
+ qcom-ipq4029-ap-303h.dtb \
+ qcom-ipq4029-ap-365.dtb \
+ qcom-ipq4029-gl-b1300.dtb \
+ qcom-ipq4029-gl-s1300.dtb \
+ qcom-ipq4029-mr33.dtb \
qcom-ipq8064-ap148.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \

555
root/target/linux/mediatek/mt7623/config-4.19
View file

@ -1,555 +0,0 @@
# CONFIG_AIO is not set
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_ARCH_AXXIA is not set
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
CONFIG_ARCH_HAS_KCOV=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_ARCH_HAS_PHYS_TO_DMA=y
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_ARCH_HAS_TICK_BROADCAST=y
CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_MEDIATEK=y
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
CONFIG_ARCH_MULTIPLATFORM=y
CONFIG_ARCH_MULTI_V6_V7=y
CONFIG_ARCH_MULTI_V7=y
CONFIG_ARCH_NR_GPIO=0
CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
CONFIG_ARM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ARCH_TIMER=y
CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
CONFIG_ARM_CPU_SUSPEND=y
# CONFIG_ARM_CPU_TOPOLOGY is not set
CONFIG_ARM_GIC=y
CONFIG_ARM_HAS_SG_CHAIN=y
CONFIG_ARM_L1_CACHE_SHIFT=6
CONFIG_ARM_L1_CACHE_SHIFT_6=y
CONFIG_ARM_LPAE=y
CONFIG_ARM_MEDIATEK_CPUFREQ=y
CONFIG_ARM_PATCH_IDIV=y
CONFIG_ARM_PATCH_PHYS_VIRT=y
# CONFIG_ARM_SMMU is not set
CONFIG_ARM_THUMB=y
CONFIG_ARM_THUMBEE=y
CONFIG_ARM_UNWIND=y
CONFIG_ARM_VIRT_EXT=y
CONFIG_ASN1=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_ATAGS=y
CONFIG_AUTO_ZRELADDR=y
# CONFIG_BCM84881_PHY is not set
CONFIG_BLK_MQ_PCI=y
# CONFIG_CACHE_L2X0 is not set
CONFIG_CLEANCACHE=y
CONFIG_CLKDEV_LOOKUP=y
CONFIG_CLKSRC_MMIO=y
CONFIG_CLONE_BACKWARDS=y
CONFIG_CLZ_TAB=y
CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 vmalloc=256M"
CONFIG_CMDLINE_EXTEND=y
CONFIG_COMMON_CLK=y
CONFIG_COMMON_CLK_MEDIATEK=y
CONFIG_COMMON_CLK_MT2701=y
CONFIG_COMMON_CLK_MT2701_AUDSYS=y
CONFIG_COMMON_CLK_MT2701_BDPSYS=y
CONFIG_COMMON_CLK_MT2701_ETHSYS=y
CONFIG_COMMON_CLK_MT2701_G3DSYS=y
CONFIG_COMMON_CLK_MT2701_HIFSYS=y
CONFIG_COMMON_CLK_MT2701_IMGSYS=y
CONFIG_COMMON_CLK_MT2701_MMSYS=y
CONFIG_COMMON_CLK_MT2701_VDECSYS=y
# CONFIG_COMMON_CLK_MT7622 is not set
CONFIG_COMMON_CLK_MT7629=y
# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
# CONFIG_COMMON_CLK_MT8135 is not set
# CONFIG_COMMON_CLK_MT8173 is not set
CONFIG_COREDUMP=y
# CONFIG_CPUFREQ_DT is not set
CONFIG_CPU_32v6K=y
CONFIG_CPU_32v7=y
CONFIG_CPU_ABRT_EV7=y
# CONFIG_CPU_BPREDICT_DISABLE is not set
CONFIG_CPU_CACHE_V7=y
CONFIG_CPU_CACHE_VIPT=y
CONFIG_CPU_COPY_V6=y
CONFIG_CPU_CP15=y
CONFIG_CPU_CP15_MMU=y
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_HAS_ASID=y
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
CONFIG_CPU_PABRT_V7=y
CONFIG_CPU_PM=y
CONFIG_CPU_RMAP=y
CONFIG_CPU_SPECTRE=y
# CONFIG_CPU_THERMAL is not set
CONFIG_CPU_THUMB_CAPABLE=y
CONFIG_CPU_TLB_V7=y
CONFIG_CPU_V7=y
CONFIG_CRASH_CORE=y
CONFIG_CRC16=y
# CONFIG_CRC32_SARWATE is not set
CONFIG_CRC32_SLICEBY8=y
CONFIG_CROSS_MEMORY_ATTACH=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_CRC32=y
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CTR=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_DRBG=y
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_MENU=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_JITTERENTROPY=y
CONFIG_CRYPTO_LZO=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=y
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_SEQIV=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_DEBUG_ALIGN_RODATA=y
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_GPIO=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_LL=y
CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
CONFIG_DEBUG_MT6589_UART0=y
# CONFIG_DEBUG_MT8127_UART0 is not set
# CONFIG_DEBUG_MT8135_UART3 is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_UART_8250=y
# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
CONFIG_DEBUG_UART_8250_SHIFT=2
# CONFIG_DEBUG_UART_8250_WORD is not set
CONFIG_DEBUG_UART_PHYS=0x11004000
CONFIG_DEBUG_UART_VIRT=0xf1004000
CONFIG_DEBUG_UNCOMPRESS=y
# CONFIG_DEBUG_USER is not set
CONFIG_DEFAULT_NETLINK=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DMA_OF=y
CONFIG_DTC=y
CONFIG_EARLY_PRINTK=y
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EINT_MTK=y
CONFIG_ELF_CORE=y
CONFIG_EXT4_FS=y
# CONFIG_F2FS_CHECK_FS is not set
CONFIG_F2FS_FS=y
# CONFIG_F2FS_FS_SECURITY is not set
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_STAT_FS=y
CONFIG_FIXED_PHY=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_FREEZER=y
CONFIG_FS_IOMAP=y
CONFIG_FS_MBCACHE=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_GENERIC_IDLE_POLL_SETUP=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_PHY=y
CONFIG_GENERIC_PINCONF=y
CONFIG_GENERIC_PINCTRL_GROUPS=y
CONFIG_GENERIC_PINMUX_FUNCTIONS=y
CONFIG_GENERIC_SCHED_CLOCK=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
# CONFIG_GPS is not set
CONFIG_HANDLE_DOMAIN_IRQ=y
# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_HAS_DMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAVE_ARCH_AUDITSYSCALL=y
CONFIG_HAVE_ARCH_BITREVERSE=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_HAVE_ARCH_PFN_VALID=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARM_ARCH_TIMER=y
CONFIG_HAVE_ARM_SMCCC=y
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_HAVE_CONTEXT_TRACKING=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_DEBUG_KMEMLEAK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_HAVE_GENERIC_GUP=y
CONFIG_HAVE_IDE=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_HAVE_NET_DSA=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_PERF_EVENTS=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_PROC_CPU=y
CONFIG_HAVE_RCU_TABLE_FREE=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_SMP=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_UID16=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HOTPLUG_CPU=y
# CONFIG_HUGETLBFS is not set
CONFIG_HWMON=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_MTK=y
CONFIG_HZ_FIXED=0
CONFIG_HZ_PERIODIC=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MT65XX=y
CONFIG_ICPLUS_PHY=y
CONFIG_IIO=y
# CONFIG_IIO_BUFFER is not set
# CONFIG_IIO_TRIGGER is not set
CONFIG_INITRAMFS_COMPRESSION=""
# CONFIG_INITRAMFS_FORCE is not set
CONFIG_INITRAMFS_ROOT_GID=1000
CONFIG_INITRAMFS_ROOT_UID=1000
CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-arm_cortex-a7_musl-1.1.14_eabi/root-mediatek /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
CONFIG_IOMMU_SUPPORT=y
CONFIG_IRQCHIP=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_IRQ_WORK=y
CONFIG_JBD2=y
CONFIG_KALLSYMS=y
CONFIG_KEXEC=y
CONFIG_KEXEC_CORE=y
CONFIG_KEYS=y
CONFIG_LEDS_MT6323=y
CONFIG_LIBFDT=y
CONFIG_LOCK_DEBUGGING_SUPPORT=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
# CONFIG_MACH_MT2701 is not set
# CONFIG_MACH_MT6589 is not set
# CONFIG_MACH_MT6592 is not set
CONFIG_MACH_MT7623=y
CONFIG_MACH_MT7629=y
# CONFIG_MACH_MT8127 is not set
# CONFIG_MACH_MT8135 is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_BUS=y
CONFIG_MDIO_DEVICE=y
CONFIG_MDIO_GPIO=y
CONFIG_MEDIATEK_MT6577_AUXADC=y
CONFIG_MEDIATEK_WATCHDOG=y
CONFIG_MEMFD_CREATE=y
CONFIG_MFD_CORE=y
CONFIG_MFD_MT6397=y
CONFIG_MFD_SYSCON=y
CONFIG_MIGHT_HAVE_CACHE_L2X0=y
CONFIG_MIGHT_HAVE_PCI=y
CONFIG_MIGRATION=y
CONFIG_MMC=y
CONFIG_MMC_BLOCK=y
CONFIG_MMC_MTK=y
CONFIG_MMC_SDHCI=y
# CONFIG_MMC_SDHCI_PCI is not set
CONFIG_MMC_SDHCI_PLTFM=y
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MODULES_USE_ELF_REL=y
CONFIG_MPILIB=y
# CONFIG_MPTCP_BINDER is not set
# CONFIG_MPTCP_FULLMESH is not set
# CONFIG_MPTCP_NDIFFPORTS is not set
# CONFIG_MPTCP_REDUNDANT is not set
# CONFIG_MPTCP_ROUNDROBIN is not set
# CONFIG_MT753X_GSW is not set
CONFIG_MTD_BLOCK2MTD=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_M25P80=y
CONFIG_MTD_MT81xx_NOR=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC=y
CONFIG_MTD_NAND_MTK=y
CONFIG_MTD_SPI_NOR=y
CONFIG_MTD_SPLIT_FIRMWARE=y
CONFIG_MTD_SPLIT_UIMAGE_FW=y
CONFIG_MTD_UBI=y
CONFIG_MTD_UBI_BEB_LIMIT=20
CONFIG_MTD_UBI_BLOCK=y
# CONFIG_MTD_UBI_FASTMAP is not set
# CONFIG_MTD_UBI_GLUEBI is not set
CONFIG_MTD_UBI_WL_THRESHOLD=4096
# CONFIG_MTK_BTIF is not set
# CONFIG_MTK_COMBO is not set
# CONFIG_MTK_CONN_LTE_IDC_SUPPORT is not set
# CONFIG_MTK_DHCPV6C_WIFI is not set
CONFIG_MTK_EFUSE=y
# CONFIG_MTK_GPS_SUPPORT is not set
# CONFIG_MTK_HSDMA is not set
CONFIG_MTK_INFRACFG=y
# CONFIG_MTK_IOMMU is not set
# CONFIG_MTK_IOMMU_V1 is not set
CONFIG_MTK_PLATFORM="mt7623"
CONFIG_MTK_PMIC_WRAP=y
CONFIG_MTK_SCPSYS=y
CONFIG_MTK_THERMAL=y
CONFIG_MTK_TIMER=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEON=y
CONFIG_NET_DSA=y
CONFIG_NET_DSA_LEGACY=y
CONFIG_NET_DSA_MT7530=y
CONFIG_NET_DSA_TAG_MTK=y
CONFIG_NET_FLOW_LIMIT=y
CONFIG_NET_MEDIATEK_SOC=y
CONFIG_NET_SWITCHDEV=y
# CONFIG_NET_VENDOR_AURORA is not set
CONFIG_NET_VENDOR_MEDIATEK=y
# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_NLS=y
CONFIG_NO_BOOTMEM=y
CONFIG_NR_CPUS=4
CONFIG_NVMEM=y
CONFIG_OF=y
CONFIG_OF_ADDRESS=y
CONFIG_OF_EARLY_FLATTREE=y
CONFIG_OF_FLATTREE=y
CONFIG_OF_GPIO=y
CONFIG_OF_IRQ=y
CONFIG_OF_KOBJ=y
CONFIG_OF_MDIO=y
CONFIG_OF_NET=y
CONFIG_OF_RESERVED_MEM=y
CONFIG_OLD_SIGACTION=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_PADATA=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PCI=y
CONFIG_PCIEAER=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIE_MEDIATEK=y
CONFIG_PCIE_PME=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_DOMAINS_GENERIC=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MSI_IRQ_DOMAIN=y
# CONFIG_PCI_V3_SEMI is not set
CONFIG_PERF_USE_VMALLOC=y
CONFIG_PGTABLE_LEVELS=3
CONFIG_PGTABLE_MAPPING=y
CONFIG_PHYLIB=y
CONFIG_PHYLINK=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_PHY_MTK_TPHY=y
# CONFIG_PHY_MTK_XSPHY is not set
CONFIG_PINCTRL=y
CONFIG_PINCTRL_MT2701=y
CONFIG_PINCTRL_MT6397=y
CONFIG_PINCTRL_MT7623=y
CONFIG_PINCTRL_MT7629=y
CONFIG_PINCTRL_MTK=y
CONFIG_PINCTRL_MTK_MOORE=y
CONFIG_PLUGIN_HOSTCC="g++"
CONFIG_PM=y
CONFIG_PM_CLK=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_GENERIC_DOMAINS=y
CONFIG_PM_GENERIC_DOMAINS_OF=y
CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
CONFIG_PM_OPP=y
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_POWER_RESET=y
CONFIG_POWER_SUPPLY=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PRINTK_TIME=y
CONFIG_PWM=y
CONFIG_PWM_MEDIATEK=y
# CONFIG_PWM_MTK_DISP is not set
CONFIG_PWM_SYSFS=y
CONFIG_RAS=y
CONFIG_RATIONAL=y
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_EXPERT is not set
CONFIG_RCU_NEED_SEGCBLIST=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_REFCOUNT_FULL=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=y
CONFIG_REGMAP_MMIO=y
CONFIG_REGMAP_SPI=y
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_REGULATOR_MT6323=y
# CONFIG_REGULATOR_MT6380 is not set
# CONFIG_REGULATOR_MT6397 is not set
# CONFIG_REGULATOR_QCOM_SPMI is not set
CONFIG_RESET_CONTROLLER=y
CONFIG_RFS_ACCEL=y
CONFIG_RPS=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_DRV_CMOS is not set
# CONFIG_RTC_DRV_MT6397 is not set
# CONFIG_RTC_DRV_MT7622 is not set
CONFIG_RTC_I2C_AND_SPI=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_SERIAL_8250_DMA is not set
CONFIG_SERIAL_8250_FSL=y
CONFIG_SERIAL_8250_MT6577=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SFP is not set
CONFIG_SGL_ALLOC=y
CONFIG_SMP=y
# CONFIG_SMP_ON_UP is not set
CONFIG_SPARSE_IRQ=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_MASTER=y
CONFIG_SPI_MEM=y
CONFIG_SPI_MT65XX=y
# CONFIG_SPI_MTK_SNFI is not set
CONFIG_SPMI=y
# CONFIG_SPS30 is not set
CONFIG_SRCU=y
CONFIG_STREAM_PARSER=y
# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_SWCONFIG=y
CONFIG_SWPHY=y
CONFIG_SWP_EMULATE=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_SYS_SUPPORTS_HUGETLBFS=y
CONFIG_TASKS_RCU=y
# CONFIG_TCP_CONG_NANQINLANG is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_GOV_STEP_WISE=y
CONFIG_THERMAL_OF=y
# CONFIG_THUMB2_KERNEL is not set
CONFIG_TICK_CPU_ACCOUNTING=y
CONFIG_TIMER_OF=y
CONFIG_TIMER_PROBE=y
CONFIG_TREE_SRCU=y
CONFIG_UBIFS_FS=y
# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
CONFIG_UBIFS_FS_LZO=y
CONFIG_UBIFS_FS_ZLIB=y
CONFIG_UEVENT_HELPER_PATH=""
CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_USB=y
CONFIG_USB_COMMON=y
# CONFIG_USB_EHCI_HCD is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MTK=y
CONFIG_USB_XHCI_PLATFORM=y
CONFIG_USE_OF=y
CONFIG_VFP=y
CONFIG_VFPv3=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_WATCHDOG_CORE=y
# CONFIG_WIRELESS is not set
# CONFIG_WLAN is not set
CONFIG_XPS=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_BCJ=y
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZLIB_DEFLATE=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZSMALLOC=y
# CONFIG_ZSMALLOC_STAT is not set