1

2025-03-09 15:40:20 +00:00 · 2020-12-24 22:51:25 +08:00 · 2020-12-24 22:51:25 +08:00 · d4a61a414a
commit d4a61a414a
parent 3e62e515c8
75 changed files with 0 additions and 9855 deletions
--- a/root/target/linux/bcm27xx/patches-5.4/990-xhci-quirks-add-link-TRB-quirk-VL805.patch
+++ b/root/target/linux/bcm27xx/patches-5.4/990-xhci-quirks-add-link-TRB-quirk-VL805.patch
@ -1,67 +0,0 @@
-From 5d9d9ba7547ad27d76dd36791f54a57ff555ff8a Mon Sep 17 00:00:00 2001
-From: Jonathan Bell <jonathan@raspberrypi.org>
-Date: Mon, 26 Oct 2020 14:03:35 +0000
-Subject: [PATCH] xhci: quirks: add link TRB quirk for VL805
-
-The VL805 controller can't cope with the TR Dequeue Pointer for an endpoint
-being set to a Link TRB. The hardware-maintained endpoint context ends up
-stuck at the address of the Link TRB, leading to erroneous ring expansion
-events whenever the enqueue pointer wraps to the dequeue position.
-
-If the search for the end of the current TD and ring cycle state lands on
-a Link TRB, move to the next segment.
-
-See: https://github.com/raspberrypi/linux/issues/3919
-
-Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
---
- drivers/usb/host/xhci-pci.c  |  1 +
- drivers/usb/host/xhci-ring.c | 10 ++++++++++
- drivers/usb/host/xhci.h      |  1 +
- 3 files changed, 12 insertions(+)
-
-diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
-index 5238fa29ea978..b975e6803d485 100644
--- a/drivers/usb/host/xhci-pci.c
-+++ b/drivers/usb/host/xhci-pci.c
-@@ -251,6 +251,7 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
- 			pdev->device == 0x3483) {
- 		xhci->quirks |= XHCI_LPM_SUPPORT;
- 		xhci->quirks |= XHCI_EP_CTX_BROKEN_DCS;
-+		xhci->quirks |= XHCI_AVOID_DQ_ON_LINK;
- 	}
- 
- 	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
-diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
-index d99e636f3844c..8149abff857c2 100644
--- a/drivers/usb/host/xhci-ring.c
-+++ b/drivers/usb/host/xhci-ring.c
-@@ -624,6 +624,16 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
- 
- 	} while (!cycle_found || !td_last_trb_found);
- 
-+	/*
-+	 * Quirk: the xHC does not correctly parse link TRBs if the HW Dequeue
-+	 * pointer is set to one. Advance to the next TRB (and next segment).
-+	 */
-+	if (xhci->quirks & XHCI_AVOID_DQ_ON_LINK && trb_is_link(new_deq)) {
-+		if (link_trb_toggles_cycle(new_deq))
-+			state->new_cycle_state ^= 0x1;
-+		next_trb(xhci, ep_ring, &new_seg, &new_deq);
-+	}
-+
- 	state->new_deq_seg = new_seg;
- 	state->new_deq_ptr = new_deq;
- 
-diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
-index 2033bb8683033..90ccc71231c1a 100644
--- a/drivers/usb/host/xhci.h
-+++ b/drivers/usb/host/xhci.h
-@@ -1874,6 +1874,7 @@ struct xhci_hcd {
- #define XHCI_RESET_PLL_ON_DISCONNECT	BIT_ULL(34)
- #define XHCI_SNPS_BROKEN_SUSPEND    BIT_ULL(35)
- #define XHCI_EP_CTX_BROKEN_DCS	BIT_ULL(36)
-+#define XHCI_AVOID_DQ_ON_LINK	BIT_ULL(37)
- 
- 	unsigned int		num_active_eps;
- 	unsigned int		limit_active_eps;
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@ -1,90 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-alfa-network,ap120c-ac)
-	ucidef_set_led_netdev "wan" "WAN" "amber:wan" "eth1"
-	;;
-asus,rt-ac58u)
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "blue:lan" "switch0" "0x1e"
-	;;
-avm,fritzbox-4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x1e"
-	;;
-avm,fritzbox-7530 |\
-glinet,gl-b1300)
-	ucidef_set_led_wlan "wlan" "WLAN" "green:wlan" "phy0tpt"
-	;;
-edgecore,oap100)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
-	;;
-engenius,eap1300)
-	ucidef_set_led_netdev "lan" "LAN" "blue:lan" "eth0"
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "yellow:wlan5g" "phy1tpt"
-	ucidef_set_led_default "mesh" "MESH" "blue:mesh" "0"
-	;;
-engenius,eap2200)
-	ucidef_set_led_netdev "lan1" "LAN1" "blue:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "blue:lan2" "eth1"
-	;;
-engenius,ens620ext)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
-	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
-	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
-	;;
-pangu,l1000)
-ucidef_set_led_default "power" "POWER" "${boardname}:blue:power" "1"
-ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2g" "phy0tpt"
-ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5g" "phy1tpt"
-ucidef_set_led_switch "wan" "WAN" "${boardname}:blue:wan" "switch0" "0x20"
-   ;;
-mobipromo,cm520-79f)
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
-	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
-	ucidef_set_led_switch "lan2" "LAN2" "blue:lan2" "switch0" "0x08"
-	;;
-pangu,l1000)
-	ucidef_set_led_default "power" "POWER" "blue:power" "1"
-    ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
-    ;;
-p2w,r619ac |\
-p2w,r619ac-128m)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "blue:wlan5g" "phy1tpt"
-	;;
-netgear,ex6100v2 |\
-netgear,ex6150v2)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:client" "phy1tpt"
-	;;
-qxwlan,e2600ac-c1 |\
-qxwlan,e2600ac-c2)
-	ucidef_set_led_wlan "wlan2g" "WLAN0" "green:wlan0" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN1" "green:wlan1" "phy1tpt"
-	;;
-zyxel,nbg6617 |\
-zyxel,wre6606)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt"
-	;;
-esac
-
-board_config_flush
-
-exit 0
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/02_network
@ -1,190 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) 2015 The Linux Foundation. All rights reserved.
-# Copyright (c) 2011-2015 OpenWrt.org
-#
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-
-ipq40xx_setup_interfaces()
-{
-	local board="$1"
-
-	case "$board" in
-	8dev,habanero-dvk|\
-	8dev,jalapeno|\
-	alfa-network,ap120c-ac|\
-	engenius,emr3500|\
-	engenius,ens620ext|\
-	luma,wrtq-329acn|\
-	plasmacloud,pa1200|\
-	plasmacloud,pa2200)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		;;
-	aruba,ap-303|\
-	aruba,ap-365|\
-	avm,fritzrepeater-1200|\
-	dlink,dap-2610 |\
-	engenius,eap1300|\
-	engenius,emd1|\
-	meraki,mr33|\
-	netgear,ex6100v2|\
-	netgear,ex6150v2|\
-	zyxel,wre6606)
-		ucidef_set_interface_lan "eth0"
-		;;
-	aruba,ap-303h)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "0u@eth1" "5:wan"
-		;;
-	asus,map-ac2200|\
-	cilab,meshpoint-one|\
-	edgecore,ecw5211|\
-	edgecore,oap100|\
-	openmesh,a42|\
-	openmesh,a62)
-		ucidef_set_interfaces_lan_wan "eth1" "eth0"
-		;;
-	asus,rt-ac58u|\
-	zyxel,nbg6617)|\
-    p2w,r619ac-128m)|\
-	p2w,r619ac)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	avm,fritzbox-4040|\
-	linksys,ea6350v3|\
-	linksys,ea8300|\
-    pangu,l1000|\
-	linksys,mr8300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	avm,fritzbox-7530)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
-		;;
-	avm,fritzrepeater-3000)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "4:lan:1" "5:lan:2"
-		;;
-	compex,wpj419|\
-	compex,wpj428|\
-	engenius,eap2200)
-		ucidef_set_interface_lan "eth0 eth1"
-		;;
-	buffalo,wtr-m2133hp)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
-		;;
-	cellc,rtl30vw)
-		ucidef_set_interface_lan "eth0"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan"
-		;;
-	devolo,magic-2-wifi-next)
-		ucidef_set_interface_lan "eth0 eth1 eth2"
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "0u@eth1" "5:wan"
-		;;
-	glinet,gl-b1300 |\
-	glinet,gl-s1300)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan"
-		;;
-	mobipromo,cm520-79f)
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan:2" "4:lan:1"
-		ucidef_set_interface_wan "eth1"
-		;;
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
-		;;
-	unielec,u4019-32m)
-		ucidef_set_interfaces_lan_wan "eth0" "eth1"
-		ucidef_add_switch "switch0" \
-			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan"
-		;;
-	*)
-		echo "Unsupported hardware. Network interfaces not initialized"
-		;;
-	esac
-}
-
-ipq40xx_setup_macs()
-{
-	local board="$1"
-	local lan_mac=""
-	local wan_mac=""
-	local label_mac=""
-
-	case "$board" in
-	8dev,habanero-dvk)
-		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
-		;;
-	asus,rt-ac58u|\
-	p2w,r619ac-128m|\
-	p2w,r619ac)
-		CI_UBIPART=UBI_DEV
-		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
-		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
-		label_mac=$wan_mac
-		;;
-	cilab,meshpoint-one)
-		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
-		;;
-	devolo,magic-2-wifi-next)
-		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
-		label_mac=$lan_mac
-		;;
-	dlink,dap-2610)
-		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
-		label_mac=$lan_mac
-		;;
-	engenius,eap2200|\
-	engenius,emd1)
-		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		label_mac=$lan_mac
-		;;
-	engenius,emr3500)
-		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
-		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		label_mac=$wan_mac
-		;;
-	engenius,ens620ext)
-		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		label_mac=$(mtd_get_mac_binary "ART" 0x6)
-		;;
-	linksys,ea6350v3)
-		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		lan_mac=$(macaddr_add "$wan_mac" 1)
-		;;
-	esac
-
-	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
-	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
-	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
-}
-
-board_config_update
-board=$(board_name)
-ipq40xx_setup_interfaces $board
-ipq40xx_setup_macs $board
-board_config_flush
-
-exit 0
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
@ -1,26 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board_config_update
-
-board=$(board_name)
-
-case "$board" in
-cellc,rtl30vw)
-	ucidef_add_gpio_switch "w_disable" "W_DISABLE mPCIE pin" "398" "1"
-	ucidef_add_gpio_switch "pmd_resin_n" "PMD_RESIN_N pin" "399" "1"
-	ucidef_add_gpio_switch "mcpie_vcc" "LTE power" "400" "0"
-	ucidef_add_gpio_switch "usb_vcc" "USB power" "401" "0"
-	;;
-cilab,meshpoint-one)
-	ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "413" "1"
-	;;
-compex,wpj428)
-	ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0"
-	;;
-esac
-
-board_config_flush
-
-exit 0
--- a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@ -1,276 +0,0 @@
-#!/bin/sh
-
-[ -e /lib/firmware/$FIRMWARE ] && exit 0
-
-. /lib/functions/caldata.sh
-
-board=$(board_name)
-
-case "$FIRMWARE" in
-"ath10k/cal-pci-0000:01:00.0.bin")
-	case "$board" in
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x9000 0x844
-		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-pci-0000:01:00.0.bin")
-	case "$board" in
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x9000 0x2f20
-		ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
-			/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
-		;;
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x212 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x9000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x32)
-		;;
-	engenius,eap2200 |\
-	openmesh,a62 |\
-	plasmacloud,pa2200)
-		caldata_extract "0:ART" 0x9000 0x2f20
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x9000 0x2f20
-		# OEM assigns 4 sequential MACs
-		ath10k_patch_mac $(macaddr_setbit_la $(macaddr_add "$(cat /sys/class/net/eth0/address)" 4))
-		;;
-    pangu,l1000)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-ahb-a000000.wifi.bin")
-	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	ezviz,cs-w3-wd1200g-eup |\
-	glinet,gl-b1300 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-	mobipromo,cm520-79f |\
-    p2w,r619ac-128m |\
-	p2w,r619ac |\
-	qcom,ap-dk01.1-c1)
-		caldata_extract "ART" 0x1000 0x2f20
-		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary mfginfo 0x1D)
-		;;
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x1000 0x2f20
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
-		caldata_extract_ubi "Factory" 0x1000 0x2f20
-		;;
-	avm,fritzbox-4040)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
-		;;
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x26)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		;;
-	devolo,magic-2-wifi-next)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress0)
-		;;
-	dlink,dap-2610)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac)
-		;;
-	engenius,emd1)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr)
-		;;
-	engenius,emr3500)
-		caldata_extract "0:ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
-		;;
-	engenius,ens620ext)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-		;;
-	pangu,l1000)
-	caldata_extract "ART" 0x1000 0x2f20
-	 ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-	;;
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x1000 0x2f20
-		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
-		;;
-	netgear,ex6100v2 |\
-	netgear,ex6150v2)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
-		;;
-	zyxel,nbg6617 |\
-	zyxel,wre6606)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
-		;;
-	esac
-	;;
-"ath10k/pre-cal-ahb-a800000.wifi.bin")
-	case "$board" in
-	8dev,habanero-dvk |\
-	8dev,jalapeno |\
-	alfa-network,ap120c-ac |\
-	cilab,meshpoint-one |\
-	ezviz,cs-w3-wd1200g-eup |\
-	glinet,gl-b1300 |\
-	glinet,gl-s1300 |\
-	linksys,ea6350v3 |\
-    p2w,r619ac-128m |\
-	p2w,r619ac |\
-	mobipromo,cm520-79f |\
-	qcom,ap-dk01.1-c1)
-		caldata_extract "ART" 0x5000 0x2f20
-		;;
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
-		;;
-	asus,map-ac2200)
-		caldata_extract_ubi "Factory" 0x5000 0x2f20
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART=UBI_DEV
-		caldata_extract_ubi "Factory" 0x5000 0x2f20
-		;;
-	avm,fritzbox-4040)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x400 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader_config")
-		;;
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000)
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader0") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C800 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") || \
-		/usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1")
-		;;
-	buffalo,wtr-m2133hp)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary ORGDATA 0x2c)
-		;;
-	cellc,rtl30vw |\
-	compex,wpj419 |\
-	compex,wpj428 |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap1300 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn|\
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200 |\
-	qxwlan,e2600ac-c1 |\
-	qxwlan,e2600ac-c2 |\
-	unielec,u4019-32m)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		;;
-	devolo,magic-2-wifi-next)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii APPSBLENV WiFiMacAddress1)
-		;;
-	dlink,dap-2610)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
-		;;
-	engenius,emd1)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
-		;;
-	engenius,emr3500)
-		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
-		;;
-	engenius,ens620ext)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
-		;;
-	linksys,ea8300 |\
-	linksys,mr8300)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 3)
-		;;
-    pangu,l1000)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-		;;
-	meraki,mr33)
-		caldata_extract_ubi "ART" 0x5000 0x2f20
-		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
-		;;
-	netgear,ex6100v2 |\
-	netgear,ex6150v2)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
-		;;
-	zyxel,nbg6617 |\
-	zyxel,wre6606)
-		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -1)
-		;;
-	esac
-	;;
-*)
-	exit 1
-	;;
-esac
--- a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/net/21_adjust_network
+++ b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/net/21_adjust_network
@ -1,7 +0,0 @@
-#!/bin/sh
-
-[ -f /lib/adjust_network.sh ] && {
-	. /lib/adjust_network.sh
-
-	adjust_eth_queue
-}
--- a/root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network
+++ b/root/target/linux/ipq40xx/base-files/etc/init.d/adjust_network
@ -1,205 +0,0 @@
-#!/bin/sh /etc/rc.common
-# Copyright (C) 2006-2011 OpenWrt.org
-
-START=99
-STOP=98
-
-rps_flow_cnt=4096
-core_count=$(grep -c processor /proc/cpuinfo)
-rps_sock_flow_ent=`expr $core_count \* $rps_flow_cnt`
-queue_cores="0 1 2"
-queue_irq_cores="1 2"
-wifi_core="3"
-usb_core="0"
-
-############### util functions ###############
-
-to_hex_list() {
-	local cores=$1
-	local converted=""
-	for core in $(echo $cores | awk '{print}')
-	do
-		local hex="$(gen_hex_mask "$core")"
-		converted="$converted $hex"
-	done
-	echo `echo $converted | sed 's/^ *//'`
-}
-
-gen_hex_mask() {
-	local cores=$1
-	local mask=0
-	for core in $(echo $cores | awk '{print}')
-	do
-		local bit="$((1 << $core))"
-		let "mask = mask + bit"
-	done
-	local hex="$(printf %x "$mask")"
-	echo "$hex"
-}
-
-val_at_index() {
-	local values=$1
-	local idx=$2
-	echo `echo $values | awk -v i=$idx '{print $i}'`
-}
-
-size_of_list() {
-	local list=$1
-	local spaces=`echo $list | grep -o ' ' | wc -l`
-	echo `expr $spaces + 1`
-}
-
-set_core_mask() {
-	local file=$1
-	local cores=$2
-	local mask="$(gen_hex_mask "$cores")"
-	echo $mask > $file
-}
-
-set_core_mask_round() {
-	local files=$1
-	local cores=$2
-	local step_size=$3
-	[ ! -n "$3" ] && step_size=1
-	
-	local core_count="$(size_of_list "$cores")"
-	local counter=0
-	local idx=1
-	local roof=`expr $core_count \* $step_size`
-	for file in $(echo $files | awk '{print}')
-	do
-		let "idx = counter / step_size + 1"
-		local core="$(val_at_index "$cores" $idx)"
-		set_core_mask $file $core
-		let "counter = counter + 1"
-		[ $counter -ge $roof ] && counter=0
-	done
-}
-
-############### assign network queues ###############
-
-set_interface_round() {
-	local interface=$1
-	local cores=$2
-	local step_size=$3
-	[ ! -n "$3" ] && step_size=1
-	
-	echo "using round mask for interface: $interface, step size: $step_size"
-	set_core_mask_round "$(ls /sys/class/net/$interface/queues/tx-*/xps_cpus)" "$cores" $step_size
-	set_core_mask_round "$(ls /sys/class/net/$interface/queues/rx-*/rps_cpus)" "$cores" $step_size
-	
-	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_flow_cnt
-	do
-		echo $rps_flow_cnt > $file
-	done
-}
-
-set_interface() {
-	local interface=$1
-	local cores=$2
-	
-	echo "using cores: $cores for interface: $interface"
-	
-	for file in /sys/class/net/$interface/queues/rx-[0-9]*/rps_cpus
-	do
-		set_core_mask $file "$cores"
-		echo $rps_flow_cnt > `dirname $file`/rps_flow_cnt
-	done
-
-	for file in /sys/class/net/$interface/queues/tx-[0-9]*/xps_cpus
-	do
-		set_core_mask $file "$cores"
-	done
-}
-
-set_interface_queues() {
-	echo "using cpu: $queue_cores for network queues"
-	for dev in /sys/class/net/eth*
-	do
-		[ -d "$dev" ] || continue
-		
-		local interface=`basename $dev`
-		
-		set_interface $interface "$queue_cores"
-	done
-
-	for dev in /sys/class/net/wlan*
-	do
-		[ -d "$dev" ] || continue
-		
-		local interface=`basename $dev`
-		
-		set_interface $interface "$queue_cores"
-	done
-	
-	for dev in /sys/class/net/eth*
-	do
-		local eth=`basename $dev`
-		echo "enabling offload on $eth"
-		ethtool -K $eth rx-checksum on >/dev/null 2>&1
-		ethtool -K $eth tx-checksum-ip-generic on >/dev/null 2>&1 || (
-		ethtool -K $eth tx-checksum-ipv4 on >/dev/null 2>&1
-		ethtool -K $eth tx-checksum-ipv6 on >/dev/null 2>&1)
-		ethtool -K $eth tx-scatter-gather on >/dev/null 2>&1
-		ethtool -K $eth gso on >/dev/null 2>&1
-		ethtool -K $eth gro on >/dev/null 2>&1
-		ethtool -K $eth lro on >/dev/null 2>&1
-		ethtool -K $eth tso on >/dev/null 2>&1
-		ethtool -K $eth ufo on >/dev/null 2>&1
-	done
-	
-	echo $rps_sock_flow_ent > /proc/sys/net/core/rps_sock_flow_entries
-	sysctl -w net.core.rps_sock_flow_entries=$rps_sock_flow_ent
-}
-
-############### assign interrupts ###############
-set_irq_cores() {
-	local mask="$(gen_hex_mask "$2")"
-	echo "set mask $mask for irq: $1"
-	echo $mask > "/proc/irq/$1/smp_affinity"
-}
-
-set_irq_pattern() {
-	local name_pattern="$1"
-	local cores="$2"
-	
-	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
-	do
-		set_irq_cores $irq "$cores"
-	done
-}
-
-set_irq_interleave() {
-	local name_pattern=$1
-	local cores=$2
-	local step_size=$3
-	
-	local files=""
-	for irq in `grep "$name_pattern" /proc/interrupts | cut -d: -f1 | sed 's, *,,'`
-	do
-		files="$files\
-		/proc/irq/$irq/smp_affinity"
-	done
-	
-	set_core_mask_round "$files" "$cores" "$step_size"
-}
-
-set_irqs() {
-	#dma
-	set_irq_pattern bam_dma "$usb_core"
-
-	#ethernet
-	set_irq_interleave eth_tx "$queue_irq_cores" 4
-	set_irq_interleave eth_rx "$queue_irq_cores" 1
-
-	#pcie
-	set_irq_pattern pcie "$wifi_core"
-
-	#usb
-	set_irq_pattern usb "$usb_core"
-}
-
-start() {
-	set_interface_queues
-	set_irqs
-}
--- a/root/target/linux/ipq40xx/base-files/etc/init.d/bootcount
+++ b/root/target/linux/ipq40xx/base-files/etc/init.d/bootcount
@ -1,16 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-boot() {
-	case $(board_name) in
-	alfa-network,ap120c-ac)
-		[ -n "$(fw_printenv bootcount changed 2>/dev/null)" ] &&\
-			echo -e "bootcount\nchanged\n" | /usr/sbin/fw_setenv -s -
-		;;
-	linksys,ea6350v3|\
-	linksys,ea8300)
-		mtd resetbc s_env || true
-		;;
-	esac
-}
--- a/root/target/linux/ipq40xx/base-files/etc/inittab
+++ b/root/target/linux/ipq40xx/base-files/etc/inittab
@ -1,5 +0,0 @@
-# Copyright (c) 2013 The Linux Foundation. All rights reserved.
-::sysinit:/etc/init.d/rcS S boot
-::shutdown:/etc/init.d/rcS K shutdown
-ttyMSM0::askfirst:/usr/libexec/login.sh
-ttyMSM1::askfirst:/usr/libexec/login.sh
--- a/root/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
+++ b/root/target/linux/ipq40xx/base-files/etc/uci-defaults/04_led_migration
@ -1,19 +0,0 @@
-. /lib/functions/migrations.sh
-
-board=$(board_name)
-
-case "$board" in
-engenius,emr3500)
-	migrate_leds "emr3500:="
-	;;
-engenius,ens620ext|\
-zyxel,nbg6617)
-	migrate_leds ":wlan2G=:wlan2g" ":wlan5G=:wlan5g"
-	;;
-esac
-
-remove_devicename_leds
-
-migrations_apply system
-
-exit 0
--- a/root/target/linux/ipq40xx/base-files/lib/adjust_network.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/adjust_network.sh
@ -1,89 +0,0 @@
-#!/bin/sh
-# this scripts is used for adjust cpu's choice of interrupts.
-#
-
-################################################
-# Adjust smp_affinity of edma
-# Globals:
-#    None
-# Arguments:
-#    None
-# Returns:
-#    None
-# Remark:
-#    execute only once on start-up.
-################################################
-adjust_edma_smp_affinity() {
-	grep -q edma_eth_ /proc/interrupts || return 0
-	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
-	local cpu=0
-	local tx_irq_num
-
-	for tx_num in `seq 0 1 15` ; do
-		cpu=`printf "%x" $((1<<((tx_num/4+0)%nr)))`
-		tx_irq_num=`grep -m1 edma_eth_tx$tx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$tx_irq_num" ] && echo $cpu > /proc/irq/$tx_irq_num/smp_affinity
-	done
-
-	for rx_num in `seq 0 1 7` ; do
-		cpu=`printf "%x" $((1<<((rx_num/2)%nr)))`
-		rx_irq_num=`grep -m1 edma_eth_rx$rx_num /proc/interrupts | cut -d ':' -f 1 | tail -n1 | tr -d ' '`
-		[ -n "$rx_irq_num" ] && echo $cpu > /proc/irq/$rx_irq_num/smp_affinity
-	done
-}
-
-################################################
-# Adjust smp_affinity of ath10k for 2G and 5G
-# Globals:
-#    None
-# Arguments:
-#    None
-# Returns:
-#    None
-# Remark:
-#    execute only once on start-up.
-################################################
-adjust_radio_smp_affinity() {
-	local irqs="`grep -E 'ath10k' /proc/interrupts | cut -d ':' -f 1 | tr -d ' '`"
-	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
-	local idx=2
-
-	for irq in $irqs; do
-		cpu=`printf "%x" $((1<<((idx)%nr)))`
-		echo $cpu > /proc/irq/$irq/smp_affinity
-		idx=$((idx+1))
-	done
-}
-
-################################################
-# Adjust queue of eth
-# Globals:
-#    None
-# Arguments:
-#    None
-# Returns:
-#    None
-# Remark:
-#    Each network reboot needs to be executed.
-################################################
-adjust_eth_queue() {
-	local nr=`cat /proc/cpuinfo | grep processor | wc -l`
-	local idx=0
-
-	for epath in /sys/class/net/eth[0-9]*; do
-		test -e $epath || break
-		echo $epath | grep -q "\." && continue
-		eth=`basename $epath`
-		idx=0
-		for exps in /sys/class/net/$eth/queues/rx-[0-9]*/rps_cpus; do
-			test -e $exps || break
-			cpu=`printf "%x" $((1<<((idx+1)%nr)))`
-			idx=$((idx+1))
-			echo $cpu > $exps
-			echo 256 > `dirname $exps`/rps_flow_cnt
-		done
-		which ethtool >/dev/null 2>&1 && ethtool -K $eth gro off
-	done
-
-	echo 1024 > /proc/sys/net/core/rps_sock_flow_entries
-}
--- a/root/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@ -1,35 +0,0 @@
-. /lib/functions.sh
-
-preinit_set_mac_address() {
-	case $(board_name) in
-	asus,map-ac2200)
-		base_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
-		ip link set dev eth0 address $(macaddr_add "$base_mac" +1)
-		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
-		;;
-	ezviz,cs-w3-wd1200g-eup)
-		ip link set dev eth0 address $(mtd_get_mac_binary "ART" 0x6)
-		ip link set dev eth1 address $(mtd_get_mac_binary "ART" 0x0)
-		;;
-	engenius,eap2200)
-		base_mac=$(cat /sys/class/net/eth0/address)
-		ip link set dev eth1 address $(macaddr_add "${base_mac}" +1)
-		;;
-	linksys,ea8300|\
-	linksys,mr8300)
-		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ip link set dev eth0 address "${base_mac}"
-		ip link set dev eth1 address $(macaddr_add "${base_mac}" 1)
-		;;
-	meraki,mr33)
-		mac_lan=$(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66)
-		[ -n "$mac_lan" ] && ip link set dev eth0 address "$mac_lan"
-		;;
-	zyxel,nbg6617)
-		base_mac=$(cat /sys/class/net/eth0/address)
-		ip link set dev eth0 address $(macaddr_add "$base_mac" +2)
-		ip link set dev eth1 address $(macaddr_add "$base_mac" +3)
-	esac
-}
-
-boot_hook_add preinit_main preinit_set_mac_address
--- a/root/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/preinit/06_set_preinit_iface_ipq40xx.sh
@ -1,22 +0,0 @@
-set_preinit_iface() {
-	. /lib/functions.sh
-
-	case $(board_name) in
-	aruba,ap-303| \
-	asus,rt-ac58u| \
-	avm,fritzbox-4040| \
-	ezviz,cs-w3-wd1200g-eup| \
-	glinet,gl-b1300| \
-	linksys,ea8300| \
-	linksys,mr8300| \
-	meraki,mr33| \
-	zyxel,nbg6617)
-		ifname=eth0
-		;;
-	devolo,magic-2-wifi-next)
-		ifname=eth1
-		;;
-	esac
-}
-
-boot_hook_add preinit_main set_preinit_iface
--- a/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
@ -1,122 +0,0 @@
-linksys_get_target_firmware() {
-	local cur_boot_part mtd_ubi0
-
-	cur_boot_part="$(/usr/sbin/fw_printenv -n boot_part)"
-	if [ -z "${cur_boot_part}" ]; then
-		mtd_ubi0=$(cat /sys/devices/virtual/ubi/ubi0/mtd_num)
-		case "$(grep -E "^mtd${mtd_ubi0}:" /proc/mtd | cut -d '"' -f 2)" in
-		kernel|rootfs)
-			cur_boot_part=1
-			;;
-		alt_kernel|alt_rootfs)
-			cur_boot_part=2
-			;;
-		esac
-		>&2 printf "Current boot_part='%s' selected from ubi0/mtd_num='%s'" \
-			"${cur_boot_part}" "${mtd_ubi0}"
-	fi
-
-	# OEM U-Boot for EA6350v3, EA8300 and MR8300; bootcmd=
-	#  if test $auto_recovery = no;
-	#      then bootipq;
-	#  elif test $boot_part = 1;
-	#      then run bootpart1;
-	#      else run bootpart2;
-	#  fi
-
-	case "$cur_boot_part" in
-	1)
-		fw_setenv -s - <<-EOF
-			boot_part 2
-			auto_recovery yes
-		EOF
-		printf "alt_kernel"
-		return
-		;;
-	2)
-		fw_setenv -s - <<-EOF
-			boot_part 1
-			auto_recovery yes
-		EOF
-		printf "kernel"
-		return
-		;;
-	*)
-		return
-		;;
-	esac
-}
-
-linksys_get_root_magic() {
-	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
-}
-
-platform_do_upgrade_linksys() {
-	local magic_long="$(get_magic_long "$1")"
-
-	local rm_oem_fw_vols="squashfs ubifs"	# from OEM [alt_]rootfs UBI
-	local vol
-
-	mkdir -p /var/lock
-	local part_label="$(linksys_get_target_firmware)"
-	touch /var/lock/fw_printenv.lock
-
-	if [ -z "$part_label" ]; then
-		echo "cannot find target partition"
-		exit 1
-	fi
-
-	local target_mtd=$(find_mtd_part "$part_label")
-
-	[ "$magic_long" = "73797375" ] && {
-		CI_KERNPART="$part_label"
-		if [ "$part_label" = "kernel" ]; then
-			CI_UBIPART="rootfs"
-		else
-			CI_UBIPART="alt_rootfs"
-		fi
-
-		local mtdnum="$(find_mtd_index "$CI_UBIPART")"
-		if [ ! "$mtdnum" ]; then
-			echo "cannot find ubi mtd partition $CI_UBIPART"
-			return 1
-		fi
-
-		local ubidev="$(nand_find_ubi "$CI_UBIPART")"
-		if [ ! "$ubidev" ]; then
-			ubiattach -m "$mtdnum"
-			sync
-			ubidev="$(nand_find_ubi "$CI_UBIPART")"
-		fi
-
-		if [ "$ubidev" ]; then
-			for vol in $rm_oem_fw_vols; do
-				ubirmvol "/dev/$ubidev" -N "$vol" 2>/dev/null
-			done
-		fi
-
-		# complete std upgrade
-		nand_upgrade_tar "$1"
-	}
-
-	[ "$magic_long" = "27051956" ] && {
-		# This magic is for a uImage (which is a sysupgrade image)
-		# check firmwares' rootfs types
-		local oldroot="$(linksys_get_root_magic "$target_mtd")"
-		local newroot="$(linksys_get_root_magic "$1")"
-
-		if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
-			# we're upgrading from a firmware with UBI to one with UBI
-			# erase everything to be safe
-			# - Is that really needed? Won't remove (or comment) the if,
-			#   because it may be needed in a future device.
-			#mtd erase $part_label
-			#get_image "$1" | mtd -n write - $part_label
-			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
-			get_image "$1" | mtd write - "$part_label"
-		else
-			echo "writing \"$1\" image to \"$part_label\""
-			get_image "$1" | mtd write - "$part_label"
-		fi
-	}
-}
--- a/root/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/upgrade/openmesh.sh
@ -1,106 +0,0 @@
-# The U-Boot loader of the OpenMesh devices requires image sizes and
-# checksums to be provided in the U-Boot environment.
-# The OpenMesh devices come with 2 main partitions - while one is active
-# sysupgrade will flash the other. The boot order is changed to boot the
-# newly flashed partition. If the new partition can't be booted due to
-# upgrade failures the previously used partition is loaded.
-
-platform_do_upgrade_openmesh() {
-	local tar_file="$1"
-	local restore_backup
-	local primary_kernel_mtd
-
-	local setenv_script="/tmp/fw_env_upgrade"
-
-	local kernel_mtd="$(find_mtd_index $PART_NAME)"
-	local kernel_offset="$(cat /sys/class/mtd/mtd${kernel_mtd}/offset)"
-	local total_size="$(cat /sys/class/mtd/mtd${kernel_mtd}/size)"
-
-	# detect to which flash region the new image is written to.
-	#
-	# 1. check what is the mtd index for the first flash region on this
-	#    device
-	# 2. check if the target partition ("inactive") has the mtd index of
-	#    the first flash region
-	#
-	#    - when it is: the new bootseq will be 1,2 and the first region is
-	#      modified
-	#    - when it isnt: bootseq will be 2,1 and the second region is
-	#      modified
-	#
-	# The detection has to be done via the hardcoded mtd partition because
-	# the current boot might be done with the fallback region. Let us
-	# assume that the current bootseq is 1,2. The bootloader detected that
-	# the image in flash region 1 is corrupt and thus switches to flash
-	# region 2. The bootseq in the u-boot-env is now still the same and
-	# the sysupgrade code can now only rely on the actual mtd indexes and
-	# not the bootseq variable to detect the currently booted flash
-	# region/image.
-	#
-	# In the above example, an implementation which uses bootseq ("1,2") to
-	# detect the currently booted image would assume that region 1 is booted
-	# and then overwrite the variables for the wrong flash region (aka the
-	# one which isn't modified). This could result in a device which doesn't
-	# boot anymore to Linux until it was reflashed with ap51-flash.
-	local next_boot_part="1"
-	case "$(board_name)" in
-	openmesh,a42)
-		primary_kernel_mtd=8
-		;;
-	openmesh,a62)
-		primary_kernel_mtd=10
-		;;
-	*)
-		echo "failed to detect primary kernel mtd partition for board"
-		return 1
-		;;
-	esac
-	[ "$kernel_mtd" = "$primary_kernel_mtd" ] || next_boot_part="2"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	local kernel_length=$(tar xf $tar_file ${board_dir}/kernel -O | wc -c)
-	local rootfs_length=$(tar xf $tar_file ${board_dir}/root -O | wc -c)
-	# rootfs without EOF marker
-	rootfs_length=$((rootfs_length-4))
-
-	local kernel_md5=$(tar xf $tar_file ${board_dir}/kernel -O | md5sum); kernel_md5="${kernel_md5%% *}"
-	# md5 checksum of rootfs with EOF marker
-	local rootfs_md5=$(tar xf $tar_file ${board_dir}/root -O | dd bs=1 count=$rootfs_length | md5sum); rootfs_md5="${rootfs_md5%% *}"
-
-	#
-	# add tar support to get_image() to use default_do_upgrade() instead?
-	#
-
-	# take care of restoring a saved config
-	[ -n "$UPGRADE_BACKUP" ] && restore_backup="${MTD_CONFIG_ARGS} -j ${UPGRADE_BACKUP}"
-
-	mtd -q erase inactive
-	tar xf $tar_file ${board_dir}/root -O | mtd -n -p $kernel_length $restore_backup write - $PART_NAME
-	tar xf $tar_file ${board_dir}/kernel -O | mtd -n write - $PART_NAME
-
-	# prepare new u-boot env
-	if [ "$next_boot_part" = "1" ]; then
-		echo "bootseq 1,2" > $setenv_script
-	else
-		echo "bootseq 2,1" > $setenv_script
-	fi
-
-	printf "kernel_size_%i 0x%08x\n" $next_boot_part $kernel_length >> $setenv_script
-	printf "vmlinux_start_addr 0x%08x\n" ${kernel_offset} >> $setenv_script
-	printf "vmlinux_size 0x%08x\n" ${kernel_length} >> $setenv_script
-	printf "vmlinux_checksum %s\n" ${kernel_md5} >> $setenv_script
-
-	printf "rootfs_size_%i 0x%08x\n" $next_boot_part $((total_size-kernel_length)) >> $setenv_script
-	printf "rootfs_start_addr 0x%08x\n" $((kernel_offset+kernel_length)) >> $setenv_script
-	printf "rootfs_size 0x%08x\n" ${rootfs_length} >> $setenv_script
-	printf "rootfs_checksum %s\n" ${rootfs_md5} >> $setenv_script
-
-	# store u-boot env changes
-	mkdir -p /var/lock
-	fw_setenv -s $setenv_script || {
-		echo "failed to update U-Boot environment"
-		return 1
-	}
-}
--- a/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@ -1,128 +0,0 @@
-PART_NAME=firmware
-REQUIRE_IMAGE_METADATA=1
-
-RAMFS_COPY_BIN='fw_printenv fw_setenv'
-RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
-
-platform_check_image() {
-	case "$(board_name)" in
-	asus,rt-ac58u)
-		CI_UBIPART="UBI_DEV"
-		local ubidev=$(nand_find_ubi $CI_UBIPART)
-		local asus_root=$(nand_find_volume $ubidev jffs2)
-
-		[ -n "$asus_root" ] || return 0
-
-		cat << EOF
-jffs2 partition is still present.
-There's probably no space left
-to install the filesystem.
-
-You need to delete the jffs2 partition first:
-# ubirmvol /dev/ubi0 --name=jffs2
-
-Once this is done. Retry.
-EOF
-		return 1
-		;;
-	esac
-	return 0;
-}
-
-askey_do_upgrade() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
-
-	nand_do_upgrade "$1"
-}
-
-zyxel_do_upgrade() {
-	local tar_file="$1"
-
-	local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
-	board_dir=${board_dir%/}
-
-	tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
-
-	if [ -n "$UPGRADE_BACKUP" ]; then
-		tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
-	else
-		tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
-	fi
-}
-
-platform_do_upgrade() {
-	case "$(board_name)" in
-	pangu,l1000 |\
-	8dev,jalapeno |\
-	aruba,ap-303 |\
-	aruba,ap-303h |\
-	aruba,ap-365 |\
-	avm,fritzbox-7530 |\
-	avm,fritzrepeater-1200 |\
-	avm,fritzrepeater-3000 |\
-	buffalo,wtr-m2133hp |\
-	cilab,meshpoint-one |\
-	edgecore,ecw5211 |\
-	edgecore,oap100 |\
-	engenius,eap2200 |\
-	luma,wrtq-329acn |\
-	mobipromo,cm520-79f |\
-	qxwlan,e2600ac-c2)
-		nand_do_upgrade "$1"
-		;;
-	alfa-network,ap120c-ac)
-		part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
-		if [ "$part" = "rootfs1" ]; then
-			fw_setenv active 2 || exit 1
-			CI_UBIPART="rootfs2"
-		else
-			fw_setenv active 1 || exit 1
-			CI_UBIPART="rootfs1"
-		fi
-		nand_do_upgrade "$1"
-		;;
-	asus,map-ac2200)
-		CI_KERNPART="linux"
-		nand_do_upgrade "$1"
-		;;
-	asus,rt-ac58u)
-		CI_UBIPART="UBI_DEV"
-		CI_KERNPART="linux"
-		nand_do_upgrade "$1"
-		;;
-	cellc,rtl30vw)
-		CI_UBIPART="ubifs"
-		askey_do_upgrade "$1"
-		;;
-	compex,wpj419)
-		nand_do_upgrade "$1"
-		;;
-	linksys,ea6350v3 |\
-	linksys,ea8300 |\
-	linksys,mr8300)
-		platform_do_upgrade_linksys "$1"
-		;;
-	meraki,mr33)
-		CI_KERNPART="part.safe"
-		nand_do_upgrade "$1"
-		;;
-	openmesh,a42 |\
-	openmesh,a62 |\
-	plasmacloud,pa1200 |\
-	plasmacloud,pa2200)
-		PART_NAME="inactive"
-		platform_do_upgrade_dualboot_datachk "$1"
-		;;
-	zyxel,nbg6617)
-		zyxel_do_upgrade "$1"
-		;;
-	*)
-		default_do_upgrade "$1"
-		;;
-	esac
-}
--- a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
+++ b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-l1000.dts
@ -1,394 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- *
- * Copyright (c) 2018 Peng Zhang <sd20@qxwlan.com>
- *
- */
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-
-	model = "ANTROUTERGZ1000";
-	compatible = "pangu,l1000", "qcom,ipq4019";
-
-
-	memory {
-		device_type = "memory";
-		reg = <0x80000000 0x20000000>; /* 512MB */
-	};
-
-        aliases {
-		sdhc1 = &sdhci;
-		led-boot = &power;
-		led-failsafe = &power;
-		led-running = &power;
-		led-upgrade = &power;
-        };
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
- 			reset-gpios = <&tlmm 47 GPIO_ACTIVE_LOW>;
-			reset-delay-us = <2000>;
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			/* select hostmode */
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-			status = "okay";
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-			switch_lan_bmp = <0x18>;
-			switch_wan_bmp = <0x20>;
-		};
-
-		i2c@78b7000 { /* BLSP1 QUP2 */
-			pinctrl-0 = <&i2c_0_pins>;
-			pinctrl-names = "default";
-
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		power: status {
-			label = "blue:status";
-			gpios = <&tlmm 3 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpios = <&tlmm 1 GPIO_ACTIVE_LOW>;
-		};
-
-		wlan5g {
-			label = "bule:wlan5g";
-			gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
-		};
-
-		wan {
-			label = "bule:wan";
-			gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
-		};     
-	    usb {
-			label = "bule::usb";
-			gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
-			trigger-sources = <&usb2>, <&usb3>;
-			linux,default-trigger = "usbport";
-		};   
-	};
-};
-
-&vqmmc {
-	status = "okay";
-};
-
-&sdhci {
-	status = "okay";
-	pinctrl-0 = <&sd_pins>;
-	pinctrl-names = "default";
-	cd-gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
-	vqmmc-supply = <&vqmmc>;
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	pinctrl-0 = <&spi_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			SBL1@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			MIBIB@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-			};
-
-			QSEE@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			CDT@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			DDRPARAMS@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			APPSBLENV@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-			};
-
-			APPSBL@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-			};
-
-			ART@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-			};
-		};
-	};
-};
-
-&nand {
-	pinctrl-0 = <&nand_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			rootfs@0 {
-				label = "rootfs";
-				reg = <0x0 0x8000000>;
-			};
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&blsp1_uart2 {
-	pinctrl-0 = <&serial_1_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&tlmm {
-	serial_pins: serial_pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	serial_1_pins: serial1_pinmux {
-		mux {
-			pins = "gpio8", "gpio9",
-				"gpio10", "gpio11";
-			function = "blsp_uart1";
-			bias-disable;
-		};
-	};
-
-	i2c_0_pins: i2c-0-pinmux {
-		mux {
-			pins = "gpio20", "gpio21";
-			function = "blsp_i2c0";
-			bias-disable;
-		};
-	};
-
-	spi_0_pins: spi_0_pinmux {
-		pinmux {
-			function = "blsp_spi0";
-			pins = "gpio13", "gpio14", "gpio15";
-		};
-		pinmux_cs {
-			function = "gpio";
-			pins = "gpio12";
-		};
-		pinconf {
-			pins = "gpio13", "gpio14", "gpio15";
-			drive-strength = <12>;
-			bias-disable;
-		};
-		pinconf_cs {
-			pins = "gpio12";
-			drive-strength = <2>;
-			bias-disable;
-			output-high;
-		};
-	};
-
-	nand_pins: nand_pins {
-		pullups {
-			pins = "gpio52", "gpio53", "gpio58",
-				"gpio59";
-			function = "qpic";
-			bias-pull-up;
-		};
-
-		pulldowns {
-			pins = "gpio54", "gpio55", "gpio56",
-				"gpio57", "gpio60", "gpio61",
-				"gpio62", "gpio63", "gpio64",
-				"gpio65", "gpio66", "gpio67",
-				"gpio68", "gpio69";
-			function = "qpic";
-			bias-pull-down;
-		};
-	};
-
-	sd_pins: sd_pins {
-		pinmux {
-			function = "sdio";
-			pins = "gpio23", "gpio24", "gpio25", "gpio26",
-				"gpio28", "gpio29", "gpio30", "gpio31";
-			drive-strength = <10>;
-		};
-
-		pinmux_sd_clk {
-			function = "sdio";
-			pins = "gpio27";
-			drive-strength = <16>;
-		};
-
-		pinmux_sd7 {
-			function = "sdio";
-			pins = "gpio32";
-			drive-strength = <10>;
-			bias-disable;
-		};
-	};
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "PANGU-L1000";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "PANGU-L1000";
-};
--- a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts
+++ b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac-128m.dts
@ -1,18 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC 128M";
-	compatible = "p2w,r619ac-128m";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};
-
-&rootfs_part1 {
-	reg = <0x0 0x8000000>;
-};
-
-/delete-node/ &rootfs_part2;
--- a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts
+++ b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dts
@ -1,12 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019-r619ac.dtsi"
-
-/ {
-	model = "P&W R619AC";
-	compatible = "p2w,r619ac";
-
-	chosen {
-		bootargs-append = " root=/dev/ubiblock0_1 rootfstype=squashfs";
-	};
-};
--- a/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
+++ b/root/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-r619ac.dtsi
@ -1,322 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-
-#include "qcom-ipq4019.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/soc/qcom,tcsr.h>
-
-/ {
-	aliases {
-		led-boot = &led_sys;
-		led-failsafe = &led_sys;
-		led-running = &led_sys;
-		led-upgrade = &led_sys;
-		label-mac-device = &gmac0;
-	};
-
-	soc {
-		rng@22000 {
-			status = "okay";
-		};
-
-		mdio@90000 {
-			status = "okay";
-			pinctrl-0 = <&mdio_pins>;
-			pinctrl-names = "default";
-		};
-
-		ess-psgmii@98000 {
-			status = "okay";
-		};
-
-		tcsr@1949000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1949000 0x100>;
-			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
-		};
-
-		tcsr@194b000 {
-			compatible = "qcom,tcsr";
-			reg = <0x194b000 0x100>;
-			qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
-		};
-
-		ess_tcsr@1953000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1953000 0x1000>;
-			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
-		};
-
-		tcsr@1957000 {
-			compatible = "qcom,tcsr";
-			reg = <0x1957000 0x100>;
-			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
-		};
-
-		usb2@60f8800 {
-			status = "okay";
-		};
-
-		usb3@8af8800 {
-			status = "okay";
-		};
-
-		crypto@8e3a000 {
-			status = "okay";
-		};
-
-		watchdog@b017000 {
-			status = "okay";
-		};
-
-		ess-switch@c000000 {
-			status = "okay";
-		};
-
-		edma@c080000 {
-			status = "okay";
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&led_pins>;
-		pinctrl-names = "default";
-
-		led_sys: sys {
-			label = "blue:sys";
-			gpios = <&tlmm 39 GPIO_ACTIVE_HIGH>;
-		};
-
-		wlan2g {
-			label = "blue:wlan2g";
-			gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tpt";
-		};
-
-		wlan5g {
-			label = "blue:wlan5g";
-			gpios = <&tlmm 50 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy1tpt";
-		};
-	};
-
-	keys {
-		compatible = "gpio-keys";
-
-		reset {
-			label = "reset";
-			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-};
-
-&blsp_dma {
-	status = "okay";
-};
-
-&blsp1_spi1 {
-	status = "okay";
-
-	flash@0 {
-		reg = <0>;
-		compatible = "jedec,spi-nor";
-		spi-max-frequency = <24000000>;
-
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "SBL1";
-				reg = <0x0 0x40000>;
-				read-only;
-			};
-
-			partition@40000 {
-				label = "MIBIB";
-				reg = <0x40000 0x20000>;
-				read-only;
-			};
-
-			partition@60000 {
-				label = "QSEE";
-				reg = <0x60000 0x60000>;
-				read-only;
-			};
-
-			partition@c0000 {
-				label = "CDT";
-				reg = <0xc0000 0x10000>;
-				read-only;
-			};
-
-			partition@d0000 {
-				label = "DDRPARAMS";
-				reg = <0xd0000 0x10000>;
-				read-only;
-			};
-
-			partition@e0000 {
-				label = "APPSBLENV";
-				reg = <0xe0000 0x10000>;
-				read-only;
-			};
-
-			partition@f0000 {
-				label = "APPSBL";
-				reg = <0xf0000 0x80000>;
-				read-only;
-			};
-
-			partition@1 {
-				label = "Bootloader";
-				reg = <0x0 0x170000>;
-				read-only;
-			};
-
-			partition@170000 {
-				label = "ART";
-				reg = <0x170000 0x10000>;
-				read-only;
-			};
-
-			partition@180000 {
-				label = "unused";
-				reg = <0x180000 0xe80000>;
-			};
-		};
-	};
-};
-
-&blsp1_uart1 {
-	pinctrl-0 = <&serial_0_pins>;
-	pinctrl-names = "default";
-	status = "okay";
-};
-
-&cryptobam {
-	status = "okay";
-};
-
-&nand {
-	status = "okay";
-
-	nand@0 {
-		partitions {
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			rootfs_part1: partition@0 {
-				label = "rootfs";
-				reg = <0x0 0x4000000>;
-			};
-
-			rootfs_part2: partition@4000000 {
-				label = "unused1";
-				reg = <0x4000000 0x4000000>;
-			};
-		};
-	};
-};
-
-&qpic_bam {
-	status = "okay";
-};
-
-&sdhci {
-	pinctrl-0 = <&sd_0_pins>;
-	pinctrl-names = "default";
-	vqmmc-supply = <&vqmmc>;
-	status = "okay";
-};
-
-&tlmm {
-	mdio_pins: mdio_pinmux {
-		mux_1 {
-			pins = "gpio6";
-			function = "mdio";
-			bias-pull-up;
-		};
-
-		mux_2 {
-			pins = "gpio7";
-			function = "mdc";
-			bias-pull-up;
-		};
-	};
-
-	sd_0_pins: sd_0_pinmux {
-		mux_1 {
-			pins = "gpio23", "gpio24", "gpio25", "gpio26", "gpio28";
-			function = "sdio";
-			drive-strength = <10>;
-		};
-
-		mux_2 {
-			pins = "gpio27";
-			function = "sdio";
-			drive-strength = <16>;
-		};
-	};
-
-	serial_0_pins: serial0-pinmux {
-		mux {
-			pins = "gpio16", "gpio17";
-			function = "blsp_uart0";
-			bias-disable;
-		};
-	};
-
-	led_pins: led_pinmux {
-		mux {
-			pins = "gpio32", "gpio39", "gpio50";
-			function = "gpio";
-			bias-pull-up;
-			output-low;
-		};
-
-		mux_1 {
-			pins = "gpio52";
-			function = "gpio";
-			bias-pull-up;
-			output-high;
-		};
-
-		mux_2 {
-			pins = "gpio61";
-			function = "gpio";
-			bias-pull-down;
-			output-high;
-		};
-	};
-};
-
-&usb3_ss_phy {
-	status = "okay";
-};
-
-&usb3_hs_phy {
-	status = "okay";
-};
-
-&usb2_hs_phy {
-	status = "okay";
-};
-
-&vqmmc {
-	status = "okay";
-};
-
-&wifi0 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "R619AC";
-};
-
-&wifi1 {
-	status = "okay";
-	qcom,ath10k-calibration-variant = "R619AC";
-};
--- a/root/target/linux/ipq40xx/image/Makefile
+++ b/root/target/linux/ipq40xx/image/Makefile
@ -1,867 +0,0 @@
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-DEVICE_VARS += NETGEAR_BOARD_ID NETGEAR_HW_ID
-DEVICE_VARS += RAS_BOARD RAS_ROOTFS_SIZE RAS_VERSION
-DEVICE_VARS += WRGG_DEVNAME WRGG_SIGNATURE
-
-define Device/Default
-	PROFILES := Default
-	KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
-	KERNEL_INITRAMFS_PREFIX := $$(IMG_PREFIX)-$(1)-initramfs
-	KERNEL_PREFIX := $$(IMAGE_PREFIX)
-	KERNEL_LOADADDR := 0x80208000
-	DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
-	SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
-	IMAGE/sysupgrade.bin/squashfs :=
-endef
-
-define Device/FitImage
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := Image
-endef
-
-define Device/FitImageLzma
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := Image
-endef
-
-define Device/FitzImage
-	KERNEL_SUFFIX := -fit-zImage.itb
-	KERNEL = kernel-bin | fit none $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL_NAME := zImage
-endef
-
-define Device/UbiFit
-	KERNEL_IN_UBI := 1
-	IMAGES := nand-factory.ubi nand-sysupgrade.bin
-	IMAGE/nand-factory.ubi := append-ubi
-	IMAGE/nand-sysupgrade.bin := sysupgrade-tar | append-metadata
-endef
-
-define Device/DniImage
-	$(call Device/FitzImage)
-	NETGEAR_BOARD_ID :=
-	NETGEAR_HW_ID :=
-	IMAGES += factory.img
-	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
-	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
-		append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-
-define Build/append-rootfshdr
-	mkimage -A $(LINUX_KARCH) \
-		-O linux -T filesystem \
-		-C lzma -a $(KERNEL_LOADADDR) -e $(if $(KERNEL_ENTRY),$(KERNEL_ENTRY),$(KERNEL_LOADADDR)) \
-		-n root.squashfs -d $(IMAGE_ROOTFS) $@.new
-	dd if=$@.new bs=64 count=1 >> $(IMAGE_KERNEL)
-endef
-
-define Build/mkmylofw_32m
-	$(eval device_id=$(word 1,$(1)))
-	$(eval revision=$(word 2,$(1)))
-
-	let \
-		size="$$(stat -c%s $@)" \
-		pad="$(subst k,* 1024,$(BLOCKSIZE))" \
-		pad="(pad - (size % pad)) % pad" \
-		newsize='size + pad'; \
-		$(STAGING_DIR_HOST)/bin/mkmylofw \
-		-B WPE72 -i 0x11f6:$(device_id):0x11f6:$(device_id) -r $(revision) \
-		-s 0x2000000 -p0x180000:$$newsize:al:0x80208000:"OpenWrt":$@ \
-		$@.new
-	@mv $@.new $@
-endef
-
-define Build/qsdk-ipq-factory-nand-askey
-	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
-		askey_kernel $(IMAGE_KERNEL) \
-		askey_fs $(IMAGE_ROOTFS) \
-		ubifs $@
-	PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $@.its $@.new
-	@mv $@.new $@
-endef
-
-define Build/SenaoFW
-	-$(STAGING_DIR_HOST)/bin/mksenaofw \
-		-n $(BOARD_NAME) -r $(VENDOR_ID) -p $(1) \
-		-c $(DATECODE) -w $(2) -x $(CW_VER) -t 0 \
-		-e $@ \
-		-o $@.new
-	@cp $@.new $@
-endef
-
-define Build/wrgg-image
-	mkwrggimg -i $@ \
-	-o $@.new \
-	-d "$(WRGG_DEVNAME)" \
-	-s "$(WRGG_SIGNATURE)" \
-	-v "" -m "" -B ""
-	mv $@.new $@
-endef
-
-define Device/8dev_habanero-dvk
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := 8devices
-	DEVICE_MODEL := Habanero DVK
-	IMAGE_SIZE := 30976k
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
-	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
-endef
-TARGET_DEVICES += 8dev_habanero-dvk
-
-define Device/8dev_jalapeno-common
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	SOC := qcom-ipq4018
-endef
-
-define Device/8dev_jalapeno
-	$(call Device/8dev_jalapeno-common)
-	DEVICE_VENDOR := 8devices
-	DEVICE_MODEL := Jalapeno
-endef
-TARGET_DEVICES += 8dev_jalapeno
-
-define Device/alfa-network_ap120c-ac
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := ALFA Network
-	DEVICE_MODEL := AP120C-AC
-	SOC := qcom-ipq4018
-	DEVICE_PACKAGES := kmod-usb-acm \
-		kmod-tpm-i2c-atmel uboot-envtools
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGE_SIZE := 65536k
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-endef
-TARGET_DEVICES += alfa-network_ap120c-ac
-
-define Device/aruba_glenmorangie
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Aruba
-	SOC := qcom-ipq4029
-	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
-endef
-
-define Device/aruba_ap-303
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-303
-endef
-TARGET_DEVICES += aruba_ap-303
-
-define Device/aruba_ap-303h
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-303H
-endef
-TARGET_DEVICES += aruba_ap-303h
-
-define Device/aruba_ap-365
-	$(call Device/aruba_glenmorangie)
-	DEVICE_MODEL := AP-365
-	DEVICE_PACKAGES += kmod-hwmon-ad7418
-endef
-TARGET_DEVICES += aruba_ap-365
-
-define Device/asus_map-ac2200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ASUS
-	DEVICE_MODEL := Lyra (MAP-AC2200)
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
-endef
-TARGET_DEVICES += asus_map-ac2200
-
-define Device/asus_rt-ac58u
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ASUS
-	DEVICE_MODEL := RT-AC58U
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DTB_SIZE := 65536
-	IMAGE_SIZE := 20439364
-	FILESYSTEMS := squashfs
-#	Someone - in their infinite wisdom - decided to put the firmware
-#	version in front of the image name \03\00\00\04 => Version 3.0.0.4
-#	Since u-boot works with strings we either need another fixup step
-#	to add a version... or we are very careful not to add '\0' into that
-#	string and call it a day.... Yeah, we do the latter!
-	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
-		kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += asus_rt-ac58u
-
-define Device/avm_fritzbox-4040
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Box 4040
-	SOC := qcom-ipq4018
-	BOARD_NAME := fritz4040
-	IMAGE_SIZE := 29056k
-	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
-	UBOOT_PARTITION_SIZE := 524288
-	IMAGES += eva.bin
-	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
-	DEVICE_PACKAGES := fritz-tffs fritz-caldata
-endef
-TARGET_DEVICES += avm_fritzbox-4040
-
-define Device/avm_fritzbox-7530
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Box 7530
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzbox-7530
-
-define Device/avm_fritzrepeater-1200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Repeater 1200
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
-endef
-TARGET_DEVICES += avm_fritzrepeater-1200
-
-define Device/avm_fritzrepeater-3000
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := AVM
-	DEVICE_MODEL := FRITZ!Repeater 3000
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
-endef
-TARGET_DEVICES += avm_fritzrepeater-3000
-
-define Device/buffalo_wtr-m2133hp
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Buffalo
-	DEVICE_MODEL := WTR-M2133HP
-	SOC := qcom-ipq4019
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-endef
-TARGET_DEVICES += buffalo_wtr-m2133hp
-
-define Device/cellc_rtl30vw
-	KERNEL_SUFFIX := -fit-uImage.itb
-	KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
-	KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | uImage lzma | pad-to 2048
-	KERNEL_NAME := Image
-	KERNEL_IN_UBI :=
-	IMAGES := nand-factory.bin nand-sysupgrade.bin
-	IMAGE/nand-factory.bin := append-rootfshdr | append-ubi | qsdk-ipq-factory-nand-askey
-	IMAGE/nand-sysupgrade.bin := append-rootfshdr | sysupgrade-tar | append-metadata
-	DEVICE_VENDOR := Cell C
-	DEVICE_MODEL := RTL30VW
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@5
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 57344k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := kmod-usb-net-qmi-wwan kmod-usb-serial-option uqmi ipq-wifi-cellc_rtl30vw
-endef
-TARGET_DEVICES += cellc_rtl30vw
-
-define Device/cilab_meshpoint-one
-	$(call Device/8dev_jalapeno-common)
-	DEVICE_VENDOR := Crisis Innovation Lab
-	DEVICE_MODEL := MeshPoint.One
-	DEVICE_PACKAGES := kmod-i2c-gpio kmod-iio-bmp280-i2c kmod-hwmon-ina2xx kmod-rtc-pcf2127
-endef
-TARGET_DEVICES += cilab_meshpoint-one
-
-define Device/compex_wpj419
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Compex
-	DEVICE_MODEL := WPJ419
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@12
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	FILESYSTEMS := squashfs
-endef
-TARGET_DEVICES += compex_wpj419
-
-define Device/compex_wpj428
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Compex
-	DEVICE_MODEL := WPJ428
-	SOC := qcom-ipq4028
-	DEVICE_DTS_CONFIG := config@4
-	BLOCKSIZE := 64k
-	IMAGE_SIZE := 31232k
-	KERNEL_SIZE := 4096k
-	IMAGES += cpximg-6a04.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
-	DEVICE_PACKAGES := kmod-gpio-beeper
-endef
-TARGET_DEVICES += compex_wpj428
-
-define Device/devolo_magic-2-wifi-next
-	$(call Device/FitImage)
-	DEVICE_VENDOR := devolo
-	DEVICE_MODEL := Magic 2 WiFi next
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-
-	# If the bootloader sees 0xDEADC0DE and this trailer at the 64k boundary of a TFTP image
-	# it will bootm it, just like we want for the initramfs.
-	KERNEL_INITRAMFS := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to 64k |\
-		append-string -e '\xDE\xAD\xC0\xDE{"fl_initramfs":""}\x00'
-
-	IMAGE_SIZE := 26624k
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-devolo_magic-2-wifi-next uboot-envtools
-endef
-TARGET_DEVICES += devolo_magic-2-wifi-next
-
-define Device/dlink_dap-2610
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := D-Link
-	DEVICE_MODEL := DAP-2610
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@ap.dk01.1-c1
-	BLOCKSIZE := 64k
-	WRGG_DEVNAME := /dev/mtdblock/8
-	WRGG_SIGNATURE := wapac30_dkbs_dap2610
-	IMAGE_SIZE := 14080k
-	IMAGES += factory.bin
-	# Bootloader expects a special 160 byte header which is added by
-	# wrgg-image.
-	# Factory image size must be larger than 6MB, and size in wrgg header must
-	# match actual factory image size to be flashable from D-Link http server.
-	# Bootloader verifies checksum of wrgg image before booting, thus jffs2
-	# cannot be part of the wrgg image. This is solved in the factory image by
-	# having the rootfs at the end of the image (without pad-rootfs). And in
-	# the sysupgrade image only the kernel is included in the wrgg checksum,
-	# but this is not flashable from the D-link http server.
-	# append-rootfs must start on an erase block boundary.
-	IMAGE/factory.bin    := append-kernel | pad-offset 6144k 160 | append-rootfs | wrgg-image | check-size
-	IMAGE/sysupgrade.bin := append-kernel | wrgg-image | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-dlink_dap2610
-endef
-TARGET_DEVICES += dlink_dap-2610
-
-define Device/edgecore_ecw5211
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Edgecore
-	DEVICE_MODEL := ECW5211
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools
-endef
-TARGET_DEVICES += edgecore_ecw5211
-
-define Device/edgecore_oap100
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Edgecore
-	DEVICE_MODEL := OAP100
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGES := nand-sysupgrade.bin
-	DEVICE_DTS_CONFIG := config@ap.dk07.1-c1
-	DEVICE_PACKAGES := ipq-wifi-edgecore_oap100 kmod-usb-acm kmod-usb-net kmod-usb-net-cdc-qmi uqmi
-endef
-TARGET_DEVICES += edgecore_oap100
-
-define Device/engenius_eap1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EAP1300
-	DEVICE_DTS_CONFIG := config@4
-	BOARD_NAME := eap1300
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 5120k
-	IMAGE_SIZE := 25344k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += engenius_eap1300
-
-define Device/engenius_eap2200
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EAP2200
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-engenius_eap2200 -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += engenius_eap2200
-
-define Device/engenius_emd1
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EMD1
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	IMAGE_SIZE := 30720k
-	IMAGES += factory.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emd1
-
-define Device/engenius_emr3500
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := EMR3500
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 30720k
-	IMAGES += factory.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
-endef
-TARGET_DEVICES += engenius_emr3500
-
-define Device/engenius_ens620ext
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EnGenius
-	DEVICE_MODEL := ENS620EXT
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@4
-	BLOCKSIZE := 64k
-	PAGESIZE := 256
-	BOARD_NAME := ENS620EXT
-	VENDOR_ID := 0x0101
-	PRODUCT_ID := 0x79
-	PRODUCT_ID_NEW := 0xA4
-	DATECODE := 190507
-	FW_VER := 3.1.2
-	FW_VER_NEW := 3.5.6
-	CW_VER := 1.8.99
-	IMAGE_SIZE := 21312k
-	KERNEL_SIZE := 5120k
-	FILESYSTEMS := squashfs
-	IMAGES += factory_30.bin factory_35.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
-	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
-	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
-endef
-TARGET_DEVICES += engenius_ens620ext
-
-define Device/ezviz_cs-w3-wd1200g-eup
-	$(call Device/FitImage)
-	DEVICE_VENDOR := EZVIZ
-	DEVICE_MODEL := CS-W3-WD1200G
-	DEVICE_VARIANT := EUP
-	DEVICE_DTS_CONFIG := config@4
-	IMAGE_SIZE := 14848k
-	SOC := qcom-ipq4018
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
-		append-metadata
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
-		ipq-wifi-ezviz_cs-w3-wd1200g-eup
-endef
-TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
-
-define Device/glinet_gl-b1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-B1300
-	BOARD_NAME := gl-b1300
-	SOC := qcom-ipq4029
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += glinet_gl-b1300
-
-define Device/glinet_gl-s1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-S1300
-	SOC := qcom-ipq4029
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	IMAGES := sysupgrade.bin
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-glinet_gl-s1300 kmod-fs-ext4 kmod-mmc kmod-spi-dev
-endef
-TARGET_DEVICES += glinet_gl-s1300
-
-define Device/linksys_ea6350v3
-	# The Linksys EA6350v3 has a uboot bootloader that does not
-	# support either booting lzma kernel images nor booting UBI
-	# partitions. This uboot, however, supports raw kernel images and
-	# gzipped images.
-	#
-	# As for the time of writing this, the device will boot the kernel
-	# from a fixed address with a fixed length of 3MiB. Also, the
-	# device has a hard-coded kernel command line that requieres the
-	# rootfs and alt_rootfs to be in mtd11 and mtd13 respectively.
-	# Oh... and the kernel partition overlaps with the rootfs
-	# partition (the same for alt_kernel and alt_rootfs).
-	#
-	# If you are planing re-partitioning the device, you may want to
-	# keep those details in mind:
-	# 1. The kernel adresses you should honor are 0x00000000 and
-	#    0x02800000 respectively.
-	# 2. The kernel size (plus the dtb) cannot exceed 3.00MiB in size.
-	# 3. You can use 'zImage', but not a raw 'Image' packed with lzma.
-	# 4. The kernel command line from uboot is harcoded to boot with
-	#    rootfs either in mtd11 or mtd13.
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA6350
-	DEVICE_VARIANT := v3
-	SOC := qcom-ipq4018
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 37888k
-	UBINIZE_OPTS := -E 5
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
-	DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += linksys_ea6350v3
-
-define Device/linksys_ea8300
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := EA8300
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
-	IMAGES += factory.bin
-	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_ea8300
-
-define Device/linksys_mr8300
-	$(call Device/FitzImage)
-	DEVICE_VENDOR := Linksys
-	DEVICE_MODEL := MR8300
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 3072k
-	IMAGE_SIZE := 87040k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
-	IMAGES += factory.bin
-	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=MR8300
-	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_mr8300-v0 kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += linksys_mr8300
-
-define Device/luma_wrtq-329acn
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Luma Home
-	DEVICE_MODEL := WRTQ-329ACN
-	SOC := qcom-ipq4018
-	DEVICE_PACKAGES := ipq-wifi-luma_wrtq-329acn kmod-ath3k kmod-eeprom-at24 kmod-i2c-gpio uboot-envtools
-	IMAGE_SIZE := 76632k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-endef
-TARGET_DEVICES += luma_wrtq-329acn
-
-define Device/meraki_mr33
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Cisco Meraki
-	DEVICE_MODEL := MR33
-	SOC := qcom-ipq4029
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
-endef
-TARGET_DEVICES += meraki_mr33
-
-define Device/mobipromo_cm520-79f
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := MobiPromo
-	DEVICE_MODEL := CM520-79F
-	SOC := qcom-ipq4019
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-mobipromo_cm520-79f kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += mobipromo_cm520-79f
-
-define Device/netgear_ex61x0v2
-	$(call Device/DniImage)
-	DEVICE_VENDOR := NETGEAR
-	DEVICE_DTS_CONFIG := config@4
-	NETGEAR_BOARD_ID := EX6150v2series
-	NETGEAR_HW_ID := 29765285+16+0+128+2x2
-	IMAGE_SIZE := 14400k
-	SOC := qcom-ipq4018
-endef
-
-define Device/netgear_ex6100v2
-	$(call Device/netgear_ex61x0v2)
-	DEVICE_MODEL := EX6100
-	DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6100v2
-
-define Device/netgear_ex6150v2
-	$(call Device/netgear_ex61x0v2)
-	DEVICE_MODEL := EX6150
-	DEVICE_VARIANT := v2
-endef
-TARGET_DEVICES += netgear_ex6150v2
-
-define Device/openmesh_a42
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := OpenMesh
-	DEVICE_MODEL := A42
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@om.a42
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15616k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a42
-
-define Device/openmesh_a62
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := OpenMesh
-	DEVICE_MODEL := A62
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@om.a62
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15552k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
-endef
-TARGET_DEVICES += openmesh_a62
-
-define Device/plasmacloud_pa1200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Plasma Cloud
-	DEVICE_MODEL := PA1200
-	SOC := qcom-ipq4018
-	DEVICE_DTS_CONFIG := config@pc.pa1200
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15616k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA1200
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools ipq-wifi-plasmacloud-pa1200
-endef
-TARGET_DEVICES += plasmacloud_pa1200
-
-define Device/plasmacloud_pa2200
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := Plasma Cloud
-	DEVICE_MODEL := PA2200
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@pc.pa2200
-	BLOCKSIZE := 64k
-	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
-	IMAGE_SIZE := 15552k
-	IMAGES += factory.bin
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=PA2200
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct ipq-wifi-plasmacloud-pa2200 uboot-envtools
-endef
-TARGET_DEVICES += plasmacloud_pa2200
-
-define Device/qcom_ap-dk01.1-c1
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK01.1
-	DEVICE_VARIANT := C1
-	BOARD_NAME := ap-dk01.1-c1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk01.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	$(call Device/FitImage)
-	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += qcom_ap-dk01.1-c1
-
-define Device/qcom_ap-dk04.1-c1
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qualcomm Atheros
-	DEVICE_MODEL := AP-DK04.1
-	DEVICE_VARIANT := C1
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-ap.dk04.1-c1
-	KERNEL_INSTALL := 1
-	KERNEL_SIZE := 4048k
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := ap-dk04.1-c1
-endef
-TARGET_DEVICES += qcom_ap-dk04.1-c1
-
-define Device/pangu_l1000
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := PANGU
-	DEVICE_MODEL := L1000
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-l1000
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := l1000
-	DEVICE_PACKAGES := ipq-wifi-pangu_l1000
-endef
-TARGET_DEVICES += pangu_l1000
-
-define Device/p2w_r619ac
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := P&W
-	DEVICE_MODEL := R619AC
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	IMAGES += nand-factory.bin
-	IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
-endef
-TARGET_DEVICES += p2w_r619ac
-
-define Device/p2w_r619ac-128m
-	$(call Device/FitzImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := P&W
-	DEVICE_MODEL := R619AC
-	DEVICE_VARIANT := 128M
-	SOC := qcom-ipq4019
-	DEVICE_DTS_CONFIG := config@10
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
-endef
-TARGET_DEVICES += p2w_r619ac-128m
-
-define Device/pangu_l1000
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := PANGU
-	DEVICE_MODEL := L1000
-	SOC := qcom-ipq4019
-	DEVICE_DTS := qcom-ipq4019-l1000
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	BOARD_NAME := l1000
-	DEVICE_PACKAGES := ipq-wifi-pangu_l1000
-endef
-TARGET_DEVICES += pangu_l1000
-
-define Device/qxwlan_e2600ac-c1
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Qxwlan
-	DEVICE_MODEL := E2600AC
-	DEVICE_VARIANT := C1
-	BOARD_NAME := e2600ac-c1
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 31232k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c1
-
-define Device/qxwlan_e2600ac-c2
-	$(call Device/FitImage)
-	$(call Device/UbiFit)
-	DEVICE_VENDOR := Qxwlan
-	DEVICE_MODEL := E2600AC
-	DEVICE_VARIANT := C2
-	SOC := qcom-ipq4019
-	KERNEL_INSTALL := 1
-	BLOCKSIZE := 128k
-	PAGESIZE := 2048
-	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
-endef
-TARGET_DEVICES += qxwlan_e2600ac-c2
-
-define Device/unielec_u4019-32m
-	$(call Device/FitImage)
-	DEVICE_VENDOR := Unielec
-	DEVICE_MODEL := U4019
-	DEVICE_VARIANT := 32M
-	BOARD_NAME := u4019-32m
-	SOC := qcom-ipq4019
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 31232k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += unielec_u4019-32m
-
-define Device/zyxel_nbg6617
-	$(call Device/FitImageLzma)
-	DEVICE_VENDOR := ZyXEL
-	DEVICE_MODEL := NBG6617
-	SOC := qcom-ipq4018
-	KERNEL_SIZE := 4096k
-	ROOTFS_SIZE := 24960k
-	RAS_BOARD := NBG6617
-	RAS_ROOTFS_SIZE := 19840k
-	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGES += factory.bin
-#	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
-#	at least as large as the one of the initial firmware image (not the current
-#	one on the device). This only applies to the Web-UI, the bootlaoder ignores
-#	this minimum-size. However, the larger image can be flashed both ways.
-	IMAGE/factory.bin := append-rootfs | pad-rootfs | pad-to 64k | check-size $$$$(ROOTFS_SIZE) | zyxel-ras-image separate-kernel
-	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | check-size $$$$(ROOTFS_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata
-	DEVICE_PACKAGES := uboot-envtools kmod-usb-ledtrig-usbport
-endef
-TARGET_DEVICES += zyxel_nbg6617
-
-define Device/zyxel_wre6606
-	$(call Device/FitImage)
-	DEVICE_VENDOR := ZyXEL
-	DEVICE_MODEL := WRE6606
-	DEVICE_DTS_CONFIG := config@4
-	SOC := qcom-ipq4018
-	IMAGE_SIZE := 13184k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
-	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
-endef
-TARGET_DEVICES += zyxel_wre6606
-
-$(eval $(call BuildImage))
--- a/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@ -1,73 +0,0 @@
-From a10fab12a927e60b7141a602e740d70cb4d09e4a Mon Sep 17 00:00:00 2001
-From: John Crispin <john@phrozen.org>
-Date: Thu, 9 Mar 2017 11:03:18 +0100
-Subject: [PATCH] arm: boot: add dts files
-
-Signed-off-by: John Crispin <john@phrozen.org>
---
- arch/arm/boot/dts/Makefile | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,60 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- 	qcom-apq8074-dragonboard.dtb \
- 	qcom-apq8084-ifc6540.dtb \
- 	qcom-apq8084-mtp.dtb \
-+	qcom-ipq4018-a42.dtb \
-+	qcom-ipq4018-ap120c-ac.dtb \
-+	qcom-ipq4018-dap-2610.dtb \
-+	qcom-ipq4018-cs-w3-wd1200g-eup.dtb \
-+	qcom-ipq4018-magic-2-wifi-next.dtb \
-+	qcom-ipq4018-ea6350v3.dtb \
-+	qcom-ipq4018-eap1300.dtb \
-+	qcom-ipq4018-ecw5211.dtb \
-+	qcom-ipq4018-emd1.dtb \
-+	qcom-ipq4018-emr3500.dtb \
-+	qcom-ipq4018-ens620ext.dtb \
-+	qcom-ipq4018-ex6100v2.dtb \
-+	qcom-ipq4018-ex6150v2.dtb \
-+	qcom-ipq4018-fritzbox-4040.dtb \
-+	qcom-ipq4018-jalapeno.dtb \
-+	qcom-ipq4018-meshpoint-one.dtb \
-+	qcom-ipq4018-nbg6617.dtb \
-+	qcom-ipq4019-oap100.dtb \
-+	qcom-ipq4018-pa1200.dtb \
-+	qcom-ipq4018-rt-ac58u.dtb \
-+	qcom-ipq4018-wre6606.dtb \
-+	qcom-ipq4018-wrtq-329acn.dtb \
- 	qcom-ipq4019-ap.dk01.1-c1.dtb \
- 	qcom-ipq4019-ap.dk04.1-c1.dtb \
- 	qcom-ipq4019-ap.dk04.1-c3.dtb \
- 	qcom-ipq4019-ap.dk07.1-c1.dtb \
- 	qcom-ipq4019-ap.dk07.1-c2.dtb \
-+	qcom-ipq4019-a62.dtb \
-+	qcom-ipq4019-cm520-79f.dtb \
-+	qcom-ipq4019-ea8300.dtb \
-+	qcom-ipq4019-eap2200.dtb \
-+	qcom-ipq4019-fritzbox-7530.dtb \
-+	qcom-ipq4019-fritzrepeater-1200.dtb \
-+	qcom-ipq4019-fritzrepeater-3000.dtb \
-+	qcom-ipq4019-map-ac2200.dtb \
-+	qcom-ipq4019-mr8300.dtb \
-+	qcom-ipq4019-e2600ac-c1.dtb \
-+	qcom-ipq4019-e2600ac-c2.dtb \
-+	qcom-ipq4019-habanero-dvk.dtb \
-+	qcom-ipq4019-pa2200.dtb \
-+	qcom-ipq4019-rtl30vw.dtb \
-+	qcom-ipq4019-u4019-32m.dtb \
-+	qcom-ipq4019-wpj419.dtb \
-+	qcom-ipq4019-wtr-m2133hp.dtb \
-+	qcom-ipq4019-r619ac.dtb \
-+	qcom-ipq4019-r619ac-128m.dtb \
-+	qcom-ipq4019-l1000.dtb \
-+	qcom-ipq4028-wpj428.dtb \
-+	qcom-ipq4029-ap-303.dtb \
-+	qcom-ipq4029-ap-303h.dtb \
-+	qcom-ipq4029-ap-365.dtb \
-+	qcom-ipq4029-gl-b1300.dtb \
-+	qcom-ipq4029-gl-s1300.dtb \
-+	qcom-ipq4029-mr33.dtb \
- 	qcom-ipq8064-ap148.dtb \
- 	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
--- a/root/target/linux/mediatek/mt7623/config-4.19
+++ b/root/target/linux/mediatek/mt7623/config-4.19
@ -1,555 +0,0 @@
-# CONFIG_AIO is not set
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_AXXIA is not set
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
-CONFIG_ARCH_HAS_PHYS_TO_DMA=y
-CONFIG_ARCH_HAS_PTE_SPECIAL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_CPU_SUSPEND=y
-# CONFIG_ARM_CPU_TOPOLOGY is not set
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_LPAE=y
-CONFIG_ARM_MEDIATEK_CPUFREQ=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_SMMU is not set
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_BCM84881_PHY is not set
-CONFIG_BLK_MQ_PCI=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLEANCACHE=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_CMDLINE="earlyprintk console=ttyS0,115200 vmalloc=256M"
-CONFIG_CMDLINE_EXTEND=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMMON_CLK_MEDIATEK=y
-CONFIG_COMMON_CLK_MT2701=y
-CONFIG_COMMON_CLK_MT2701_AUDSYS=y
-CONFIG_COMMON_CLK_MT2701_BDPSYS=y
-CONFIG_COMMON_CLK_MT2701_ETHSYS=y
-CONFIG_COMMON_CLK_MT2701_G3DSYS=y
-CONFIG_COMMON_CLK_MT2701_HIFSYS=y
-CONFIG_COMMON_CLK_MT2701_IMGSYS=y
-CONFIG_COMMON_CLK_MT2701_MMSYS=y
-CONFIG_COMMON_CLK_MT2701_VDECSYS=y
-# CONFIG_COMMON_CLK_MT7622 is not set
-CONFIG_COMMON_CLK_MT7629=y
-# CONFIG_COMMON_CLK_MT7629_ETHSYS is not set
-# CONFIG_COMMON_CLK_MT7629_HIFSYS is not set
-# CONFIG_COMMON_CLK_MT8135 is not set
-# CONFIG_COMMON_CLK_MT8173 is not set
-CONFIG_COREDUMP=y
-# CONFIG_CPUFREQ_DT is not set
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-# CONFIG_CPU_THERMAL is not set
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRASH_CORE=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CROSS_MEMORY_ATTACH=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MT6589_UART0=y
-# CONFIG_DEBUG_MT8127_UART0 is not set
-# CONFIG_DEBUG_MT8135_UART3 is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0x11004000
-CONFIG_DEBUG_UART_VIRT=0xf1004000
-CONFIG_DEBUG_UNCOMPRESS=y
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_NETLINK=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EINT_MTK=y
-CONFIG_ELF_CORE=y
-CONFIG_EXT4_FS=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FREEZER=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GPS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-# CONFIG_HARDEN_BRANCH_PREDICTOR is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARM_ARCH_TIMER=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_RSEQ=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOTPLUG_CPU=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_MTK=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MT65XX=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_IIO=y
-# CONFIG_IIO_BUFFER is not set
-# CONFIG_IIO_TRIGGER is not set
-CONFIG_INITRAMFS_COMPRESSION=""
-# CONFIG_INITRAMFS_FORCE is not set
-CONFIG_INITRAMFS_ROOT_GID=1000
-CONFIG_INITRAMFS_ROOT_UID=1000
-CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-arm_cortex-a7_musl-1.1.14_eabi/root-mediatek /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt"
-# CONFIG_IOMMU_DEBUGFS is not set
-# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set
-# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-CONFIG_KALLSYMS=y
-CONFIG_KEXEC=y
-CONFIG_KEXEC_CORE=y
-CONFIG_KEYS=y
-CONFIG_LEDS_MT6323=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZ4_DECOMPRESS=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-# CONFIG_MACH_MT2701 is not set
-# CONFIG_MACH_MT6589 is not set
-# CONFIG_MACH_MT6592 is not set
-CONFIG_MACH_MT7623=y
-CONFIG_MACH_MT7629=y
-# CONFIG_MACH_MT8127 is not set
-# CONFIG_MACH_MT8135 is not set
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MDIO_BITBANG=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_GPIO=y
-CONFIG_MEDIATEK_MT6577_AUXADC=y
-CONFIG_MEDIATEK_WATCHDOG=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_CORE=y
-CONFIG_MFD_MT6397=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MTK=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-# CONFIG_MPTCP_BINDER is not set
-# CONFIG_MPTCP_FULLMESH is not set
-# CONFIG_MPTCP_NDIFFPORTS is not set
-# CONFIG_MPTCP_REDUNDANT is not set
-# CONFIG_MPTCP_ROUNDROBIN is not set
-# CONFIG_MT753X_GSW is not set
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MT81xx_NOR=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_MTK=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_SPLIT_UIMAGE_FW=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-# CONFIG_MTK_BTIF is not set
-# CONFIG_MTK_COMBO is not set
-# CONFIG_MTK_CONN_LTE_IDC_SUPPORT is not set
-# CONFIG_MTK_DHCPV6C_WIFI is not set
-CONFIG_MTK_EFUSE=y
-# CONFIG_MTK_GPS_SUPPORT is not set
-# CONFIG_MTK_HSDMA is not set
-CONFIG_MTK_INFRACFG=y
-# CONFIG_MTK_IOMMU is not set
-# CONFIG_MTK_IOMMU_V1 is not set
-CONFIG_MTK_PLATFORM="mt7623"
-CONFIG_MTK_PMIC_WRAP=y
-CONFIG_MTK_SCPSYS=y
-CONFIG_MTK_THERMAL=y
-CONFIG_MTK_TIMER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_LEGACY=y
-CONFIG_NET_DSA_MT7530=y
-CONFIG_NET_DSA_TAG_MTK=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_MEDIATEK_SOC=y
-CONFIG_NET_SWITCHDEV=y
-# CONFIG_NET_VENDOR_AURORA is not set
-CONFIG_NET_VENDOR_MEDIATEK=y
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_MEDIATEK=y
-CONFIG_PCIE_PME=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-# CONFIG_PCI_V3_SEMI is not set
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PGTABLE_MAPPING=y
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MTK_TPHY=y
-# CONFIG_PHY_MTK_XSPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_MT2701=y
-CONFIG_PINCTRL_MT6397=y
-CONFIG_PINCTRL_MT7623=y
-CONFIG_PINCTRL_MT7629=y
-CONFIG_PINCTRL_MTK=y
-CONFIG_PINCTRL_MTK_MOORE=y
-CONFIG_PLUGIN_HOSTCC="g++"
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_PM_GENERIC_DOMAINS=y
-CONFIG_PM_GENERIC_DOMAINS_OF=y
-CONFIG_PM_GENERIC_DOMAINS_SLEEP=y
-CONFIG_PM_OPP=y
-CONFIG_PM_SLEEP=y
-CONFIG_PM_SLEEP_SMP=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_COUNT=y
-# CONFIG_PREEMPT_NONE is not set
-CONFIG_PREEMPT_RCU=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PWM=y
-CONFIG_PWM_MEDIATEK=y
-# CONFIG_PWM_MTK_DISP is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-# CONFIG_RCU_EXPERT is not set
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_MT6323=y
-# CONFIG_REGULATOR_MT6380 is not set
-# CONFIG_REGULATOR_MT6397 is not set
-# CONFIG_REGULATOR_QCOM_SPMI is not set
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_MT6397 is not set
-# CONFIG_RTC_DRV_MT7622 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SERIAL_8250_DMA is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-# CONFIG_SFP is not set
-CONFIG_SGL_ALLOC=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_MEM=y
-CONFIG_SPI_MT65XX=y
-# CONFIG_SPI_MTK_SNFI is not set
-CONFIG_SPMI=y
-# CONFIG_SPS30 is not set
-CONFIG_SRCU=y
-CONFIG_STREAM_PARSER=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SUSPEND=y
-CONFIG_SUSPEND_FREEZER=y
-CONFIG_SWCONFIG=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_TASKS_RCU=y
-# CONFIG_TCP_CONG_NANQINLANG is not set
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UEVENT_HELPER_PATH=""
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNINLINE_SPIN_UNLOCK=y
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MTK=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-# CONFIG_WIRELESS is not set
-# CONFIG_WLAN is not set
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSMALLOC=y
-# CONFIG_ZSMALLOC_STAT is not set