mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
Fix 5.15 for rockchip
This commit is contained in:
parent
3cd41393c4
commit
d9211f710a
4 changed files with 13 additions and 144 deletions
|
@ -1,70 +0,0 @@
|
|||
From: William Wu <william.wu@rock-chips.com>
|
||||
|
||||
RK3328 has one USB 3.0 OTG controller which uses DWC_USB3
|
||||
core's general architecture. It can act as static xHCI host
|
||||
controller, static device controller, USB 3.0/2.0 OTG basing
|
||||
on ID of USB3.0 PHY.
|
||||
|
||||
Signed-off-by: William Wu <william.wu@rock-chips.com>
|
||||
Signed-off-by: Leonidas P. Papadakos <papadakospan@gmail.com>
|
||||
|
||||
---
|
||||
|
||||
NOTE: This binding still has issues. From the original thread:
|
||||
|
||||
the rk3328 usb3-phy has an issue with detecting any plugin events
|
||||
after a previous device got removed - see the inno-usb3-phy driver
|
||||
in the vendor kernel.
|
||||
|
||||
The current state is good-enough for enabling the USB3 attached LAN
|
||||
port of the NanoPi R2S. However, it might explode depending on your
|
||||
use-case. You've been warned.
|
||||
|
||||
---
|
||||
arch/arm64/boot/dts/rockchip/rk3328.dtsi | 27 ++++++++++++++++++++++++
|
||||
1 file changed, 27 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
|
||||
@@ -985,22 +985,30 @@
|
||||
};
|
||||
|
||||
usbdrd3: usb@ff600000 {
|
||||
- compatible = "rockchip,rk3328-dwc3", "snps,dwc3";
|
||||
- reg = <0x0 0xff600000 0x0 0x100000>;
|
||||
- interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ compatible = "rockchip,rk3328-dwc3", "rockchip,rk3399-dwc3";
|
||||
clocks = <&cru SCLK_USB3OTG_REF>, <&cru SCLK_USB3OTG_SUSPEND>,
|
||||
<&cru ACLK_USB3OTG>;
|
||||
clock-names = "ref_clk", "suspend_clk",
|
||||
"bus_clk";
|
||||
- dr_mode = "otg";
|
||||
- phy_type = "utmi_wide";
|
||||
- snps,dis-del-phy-power-chg-quirk;
|
||||
- snps,dis_enblslpm_quirk;
|
||||
- snps,dis-tx-ipgap-linecheck-quirk;
|
||||
- snps,dis-u2-freeclk-exists-quirk;
|
||||
- snps,dis_u2_susphy_quirk;
|
||||
- snps,dis_u3_susphy_quirk;
|
||||
+ #address-cells = <2>;
|
||||
+ #size-cells = <2>;
|
||||
+ ranges;
|
||||
status = "disabled";
|
||||
+
|
||||
+ usbdrd_dwc3: dwc3@ff600000 {
|
||||
+ compatible = "snps,dwc3";
|
||||
+ reg = <0x0 0xff600000 0x0 0x100000>;
|
||||
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
|
||||
+ dr_mode = "otg";
|
||||
+ phy_type = "utmi_wide";
|
||||
+ snps,dis_enblslpm_quirk;
|
||||
+ snps,dis-u2-freeclk-exists-quirk;
|
||||
+ snps,dis_u2_susphy_quirk;
|
||||
+ snps,dis_u3_susphy_quirk;
|
||||
+ snps,dis-del-phy-power-chg-quirk;
|
||||
+ snps,dis-tx-ipgap-linecheck-quirk;
|
||||
+ status = "disabled";
|
||||
+ };
|
||||
};
|
||||
|
||||
gic: interrupt-controller@ff811000 {
|
|
@ -1,60 +0,0 @@
|
|||
From 0fc3b9b7619c4878f73a6a7989863f0d1a3fd392 Mon Sep 17 00:00:00 2001
|
||||
From: David Bauer <mail@david-bauer.net>
|
||||
Date: Fri, 10 Jul 2020 21:12:16 +0200
|
||||
Subject: [PATCH] rockchip: enabled LAN port on NanoPi R2S
|
||||
|
||||
Enable the USB3 port on the FriendlyARM NanoPi R2S.
|
||||
This is required for the USB3 attached LAN port to work.
|
||||
|
||||
Signed-off-by: David Bauer <mail@david-bauer.net>
|
||||
---
|
||||
.../boot/dts/rockchip/rk3328-nanopi-r2s.dts | 27 +++++++++++++++++++
|
||||
1 file changed, 27 insertions(+)
|
||||
|
||||
--- a/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
||||
+++ b/arch/arm64/boot/dts/rockchip/rk3328-nanopi-r2s.dts
|
||||
@@ -44,6 +44,18 @@
|
||||
};
|
||||
};
|
||||
|
||||
+ vcc_rtl8153: vcc-rtl8153-regulator {
|
||||
+ compatible = "regulator-fixed";
|
||||
+ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&rtl8153_en_drv>;
|
||||
+ regulator-always-on;
|
||||
+ regulator-name = "vcc_rtl8153";
|
||||
+ regulator-min-microvolt = <5000000>;
|
||||
+ regulator-max-microvolt = <5000000>;
|
||||
+ enable-active-high;
|
||||
+ };
|
||||
+
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
|
||||
@@ -271,6 +283,12 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
+
|
||||
+ usb {
|
||||
+ rtl8153_en_drv: rtl8153-en-drv {
|
||||
+ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
+ };
|
||||
+ };
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
@@ -377,3 +395,12 @@
|
||||
&usb_host0_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&usbdrd3 {
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
+&usbdrd_dwc3 {
|
||||
+ dr_mode = "host";
|
||||
+ status = "okay";
|
||||
+};
|
|
@ -1,10 +0,0 @@
|
|||
--- a/arch/arm64/boot/dts/rockchip/Makefile
|
||||
+++ b/arch/arm64/boot/dts/rockchip/Makefile
|
||||
@@ -36,6 +36,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-pi
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-puma-haikou.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
|
||||
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4c.dtb
|
Loading…
Add table
Add a link
Reference in a new issue