mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
add 5.15 m4
This commit is contained in:
parent
990cc95761
commit
dd8640d412
2 changed files with 316 additions and 536 deletions
|
@ -1,536 +0,0 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
#include "bcm2711.dtsi"
|
||||
#include "bcm2835-rpi.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
|
||||
model = "Raspberry Pi Compute Module 4";
|
||||
|
||||
chosen {
|
||||
/* 8250 auxiliary UART instead of pl011 */
|
||||
stdout-path = "serial1:115200n8";
|
||||
};
|
||||
|
||||
/* Will be filled by the bootloader */
|
||||
memory@0 {
|
||||
device_type = "memory";
|
||||
reg = <0 0 0>;
|
||||
};
|
||||
|
||||
aliases {
|
||||
emmc2bus = &emmc2bus;
|
||||
ethernet0 = &genet;
|
||||
pcie0 = &pcie0;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
label = "PWR";
|
||||
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
linux,default-trigger = "default-on";
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&expgpio 1 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
sd_io_1v8_reg: sd_io_1v8_reg {
|
||||
compatible = "regulator-gpio";
|
||||
regulator-name = "vdd-sd-io";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
regulator-settling-time-us = <5000>;
|
||||
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
|
||||
states = <1800000 0x1
|
||||
3300000 0x0>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&firmware {
|
||||
expgpio: gpio {
|
||||
compatible = "raspberrypi,firmware-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "BT_ON",
|
||||
"WL_ON",
|
||||
"PWR_LED_OFF",
|
||||
"ANT1",
|
||||
"VDD_SD_IO_SEL",
|
||||
"CAM_GPIO",
|
||||
"SD_PWR_ON",
|
||||
"ANT2";
|
||||
status = "okay";
|
||||
|
||||
ant1: ant1 {
|
||||
gpio-hog;
|
||||
gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
};
|
||||
|
||||
ant2: ant2 {
|
||||
gpio-hog;
|
||||
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||
output-low;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm1_0_gpio40 &pwm1_1_gpio41>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SDHCI is used to control the SDIO for wireless */
|
||||
&sdhci {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_gpio34>;
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
status = "okay";
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* EMMC2 is used to drive the SD card */
|
||||
&emmc2 {
|
||||
vqmmc-supply = <&sd_io_1v8_reg>;
|
||||
broken-cd;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&genet {
|
||||
phy-handle = <&phy1>;
|
||||
phy-mode = "rgmii-rxid";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&genet_mdio {
|
||||
phy1: ethernet-phy@1 {
|
||||
/* No PHY interrupt */
|
||||
reg = <0x1>;
|
||||
};
|
||||
};
|
||||
|
||||
/* uart0 communicates with the BT module */
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32>;
|
||||
uart-has-rtscts;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
max-speed = <2000000>;
|
||||
shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* uart1 is mapped to the pin header */
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_gpio14>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vchiq {
|
||||
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
// =============================================
|
||||
// Downstream rpi- changes
|
||||
|
||||
#include "bcm270x.dtsi"
|
||||
#include "bcm271x-rpi-bt.dtsi"
|
||||
|
||||
/ {
|
||||
soc {
|
||||
/delete-node/ pixelvalve@7e807000;
|
||||
/delete-node/ hdmi@7e902000;
|
||||
};
|
||||
};
|
||||
|
||||
#include "bcm2711-rpi.dtsi"
|
||||
#include "bcm283x-rpi-csi0-2lane.dtsi"
|
||||
#include "bcm283x-rpi-csi1-4lane.dtsi"
|
||||
#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
|
||||
|
||||
/ {
|
||||
chosen {
|
||||
bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial1 = &uart0;
|
||||
mmc0 = &emmc2;
|
||||
mmc1 = &mmcnr;
|
||||
mmc2 = &sdhost;
|
||||
/delete-property/ i2c2;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
i2c5 = &i2c5;
|
||||
i2c6 = &i2c6;
|
||||
/delete-property/ intc;
|
||||
};
|
||||
|
||||
/delete-node/ wifi-pwrseq;
|
||||
};
|
||||
|
||||
&pcie0 {
|
||||
brcm,enable-l1ss;
|
||||
};
|
||||
|
||||
&mmcnr {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdio_pins>;
|
||||
bus-width = <4>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-0 = <&uart0_pins &bt_pins>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
||||
cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
||||
|
||||
spidev0: spidev@0{
|
||||
compatible = "spidev";
|
||||
reg = <0>; /* CE0 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <125000000>;
|
||||
};
|
||||
|
||||
spidev1: spidev@1{
|
||||
compatible = "spidev";
|
||||
reg = <1>; /* CE1 */
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
spi-max-frequency = <125000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
spi0_pins: spi0_pins {
|
||||
brcm,pins = <9 10 11>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
};
|
||||
|
||||
spi0_cs_pins: spi0_cs_pins {
|
||||
brcm,pins = <8 7>;
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
spi3_pins: spi3_pins {
|
||||
brcm,pins = <1 2 3>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
|
||||
spi3_cs_pins: spi3_cs_pins {
|
||||
brcm,pins = <0 24>;
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
spi4_pins: spi4_pins {
|
||||
brcm,pins = <5 6 7>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
|
||||
spi4_cs_pins: spi4_cs_pins {
|
||||
brcm,pins = <4 25>;
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
spi5_pins: spi5_pins {
|
||||
brcm,pins = <13 14 15>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
|
||||
spi5_cs_pins: spi5_cs_pins {
|
||||
brcm,pins = <12 26>;
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
spi6_pins: spi6_pins {
|
||||
brcm,pins = <19 20 21>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
};
|
||||
|
||||
spi6_cs_pins: spi6_cs_pins {
|
||||
brcm,pins = <18 27>;
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
i2c0_pins: i2c0 {
|
||||
brcm,pins = <0 1>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2c1_pins: i2c1 {
|
||||
brcm,pins = <2 3>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2c3_pins: i2c3 {
|
||||
brcm,pins = <4 5>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2c4_pins: i2c4 {
|
||||
brcm,pins = <8 9>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2c5_pins: i2c5 {
|
||||
brcm,pins = <12 13>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2c6_pins: i2c6 {
|
||||
brcm,pins = <22 23>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
i2s_pins: i2s {
|
||||
brcm,pins = <18 19 20 21>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
};
|
||||
|
||||
sdio_pins: sdio_pins {
|
||||
brcm,pins = <34 35 36 37 38 39>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
|
||||
brcm,pull = <0 2 2 2 2 2>;
|
||||
};
|
||||
|
||||
bt_pins: bt_pins {
|
||||
brcm,pins = "-"; // non-empty to keep btuart happy, //4 = 0
|
||||
// to fool pinctrl
|
||||
brcm,function = <0>;
|
||||
brcm,pull = <2>;
|
||||
};
|
||||
|
||||
uart0_pins: uart0_pins {
|
||||
brcm,pins = <32 33>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
|
||||
uart1_pins: uart1_pins {
|
||||
brcm,pins;
|
||||
brcm,function;
|
||||
brcm,pull;
|
||||
};
|
||||
|
||||
uart2_pins: uart2_pins {
|
||||
brcm,pins = <0 1>;
|
||||
brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
|
||||
uart3_pins: uart3_pins {
|
||||
brcm,pins = <4 5>;
|
||||
brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
|
||||
uart4_pins: uart4_pins {
|
||||
brcm,pins = <8 9>;
|
||||
brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
|
||||
uart5_pins: uart5_pins {
|
||||
brcm,pins = <12 13>;
|
||||
brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0if {
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c1_pins>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&i2s {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2s_pins>;
|
||||
};
|
||||
|
||||
/ {
|
||||
__overrides__ {
|
||||
/delete-property/ i2c2_baudrate;
|
||||
/delete-property/ i2c2_iknowwhatimdoing;
|
||||
};
|
||||
};
|
||||
|
||||
&firmwarekms {
|
||||
compatible = "raspberrypi,rpi-firmware-kms-2711";
|
||||
};
|
||||
|
||||
// =============================================
|
||||
// Board specific stuff here
|
||||
|
||||
/ {
|
||||
sd_vcc_reg: sd_vcc_reg {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc-sd";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-boot-on;
|
||||
enable-active-high;
|
||||
gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&emmc2 {
|
||||
vmmc-supply = <&sd_vcc_reg>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
|
||||
&phy1 {
|
||||
led-modes = <0x00 0x08>; /* link/activity link */
|
||||
};
|
||||
|
||||
&gpio {
|
||||
audio_pins: audio_pins {
|
||||
brcm,pins = <>;
|
||||
brcm,function = <>;
|
||||
};
|
||||
};
|
||||
|
||||
&leds {
|
||||
act_led: act {
|
||||
label = "led0";
|
||||
linux,default-trigger = "mmc0";
|
||||
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
pwr_led: pwr {
|
||||
label = "led1";
|
||||
linux,default-trigger = "default-on";
|
||||
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&audio {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&audio_pins>;
|
||||
brcm,disable-headphones = <1>;
|
||||
};
|
||||
|
||||
&vc4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pixelvalve0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pixelvalve1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pixelvalve2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pixelvalve3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&pixelvalve4 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&hdmi0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ddc0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&hdmi1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&ddc1 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
/ {
|
||||
__overrides__ {
|
||||
act_led_gpio = <&act_led>,"gpios:4";
|
||||
act_led_activelow = <&act_led>,"gpios:8";
|
||||
act_led_trigger = <&act_led>,"linux,default-trigger";
|
||||
|
||||
pwr_led_gpio = <&pwr_led>,"gpios:4";
|
||||
pwr_led_activelow = <&pwr_led>,"gpios:8";
|
||||
pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
|
||||
|
||||
eth_led0 = <&phy1>,"led-modes:0";
|
||||
eth_led1 = <&phy1>,"led-modes:4";
|
||||
|
||||
ant1 = <&ant1>,"output-high?=on",
|
||||
<&ant1>, "output-low?=off",
|
||||
<&ant2>, "output-high?=off",
|
||||
<&ant2>, "output-low?=on";
|
||||
ant2 = <&ant1>,"output-high?=off",
|
||||
<&ant1>, "output-low?=on",
|
||||
<&ant2>, "output-high?=on",
|
||||
<&ant2>, "output-low?=off";
|
||||
noant = <&ant1>,"output-high?=off",
|
||||
<&ant1>, "output-low?=on",
|
||||
<&ant2>, "output-high?=off",
|
||||
<&ant2>, "output-low?=on";
|
||||
|
||||
sd_poll_once = <&emmc2>, "non-removable?";
|
||||
spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
|
||||
<&spi0>, "dmas:8=", <&dma40>;
|
||||
};
|
||||
};
|
|
@ -0,0 +1,316 @@
|
|||
--- bcm2711-rpi-cm4.dts 2022-01-04 02:51:16.000000000 +0800
|
||||
+++ bcm2711-rpi-cm41.dts 2022-01-04 03:10:34.000000000 +0800
|
||||
@@ -6,7 +6,7 @@
|
||||
|
||||
/ {
|
||||
compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
|
||||
- model = "Raspberry Pi Compute Module 4";
|
||||
+ model = "openmptcprouter5G_M4";
|
||||
|
||||
chosen {
|
||||
/* 8250 auxiliary UART instead of pl011 */
|
||||
@@ -68,18 +68,11 @@
|
||||
gpio-line-names = "BT_ON",
|
||||
"WL_ON",
|
||||
"PWR_LED_OFF",
|
||||
- "ANT1",
|
||||
"VDD_SD_IO_SEL",
|
||||
"CAM_GPIO",
|
||||
"SD_PWR_ON",
|
||||
"ANT2";
|
||||
|
||||
- ant1: ant1 {
|
||||
- gpio-hog;
|
||||
- gpios = <3 GPIO_ACTIVE_HIGH>;
|
||||
- output-high;
|
||||
- };
|
||||
-
|
||||
ant2: ant2 {
|
||||
gpio-hog;
|
||||
gpios = <7 GPIO_ACTIVE_HIGH>;
|
||||
@@ -108,23 +101,10 @@
|
||||
"SPI_MISO",
|
||||
"SPI_MOSI",
|
||||
"SPI_SCLK",
|
||||
- "GPIO12",
|
||||
- "GPIO13",
|
||||
/* Serial port */
|
||||
"TXD1",
|
||||
"RXD1",
|
||||
- "GPIO16",
|
||||
- "GPIO17",
|
||||
- "GPIO18",
|
||||
- "GPIO19",
|
||||
- "GPIO20",
|
||||
- "GPIO21",
|
||||
- "GPIO22",
|
||||
- "GPIO23",
|
||||
- "GPIO24",
|
||||
"GPIO25",
|
||||
- "GPIO26",
|
||||
- "GPIO27",
|
||||
"RGMII_MDIO",
|
||||
"RGMIO_MDC",
|
||||
/* Used by BT module */
|
||||
@@ -311,14 +291,9 @@
|
||||
mmc2 = &sdhost;
|
||||
i2c3 = &i2c3;
|
||||
i2c4 = &i2c4;
|
||||
- i2c5 = &i2c5;
|
||||
- i2c6 = &i2c6;
|
||||
i2c20 = &ddc0;
|
||||
i2c21 = &ddc1;
|
||||
- spi3 = &spi3;
|
||||
spi4 = &spi4;
|
||||
- spi5 = &spi5;
|
||||
- spi6 = &spi6;
|
||||
/delete-property/ intc;
|
||||
};
|
||||
|
||||
@@ -341,49 +316,7 @@
|
||||
pinctrl-0 = <&uart1_pins>;
|
||||
};
|
||||
|
||||
-&spi0 {
|
||||
- pinctrl-names = "default";
|
||||
- pinctrl-0 = <&spi0_pins &spi0_cs_pins>;
|
||||
- cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
||||
-
|
||||
- spidev0: spidev@0{
|
||||
- compatible = "spidev";
|
||||
- reg = <0>; /* CE0 */
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <0>;
|
||||
- spi-max-frequency = <125000000>;
|
||||
- };
|
||||
-
|
||||
- spidev1: spidev@1{
|
||||
- compatible = "spidev";
|
||||
- reg = <1>; /* CE1 */
|
||||
- #address-cells = <1>;
|
||||
- #size-cells = <0>;
|
||||
- spi-max-frequency = <125000000>;
|
||||
- };
|
||||
-};
|
||||
-
|
||||
&gpio {
|
||||
- spi0_pins: spi0_pins {
|
||||
- brcm,pins = <9 10 11>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
- };
|
||||
-
|
||||
- spi0_cs_pins: spi0_cs_pins {
|
||||
- brcm,pins = <8 7>;
|
||||
- brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
- };
|
||||
-
|
||||
- spi3_pins: spi3_pins {
|
||||
- brcm,pins = <1 2 3>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
- };
|
||||
-
|
||||
- spi3_cs_pins: spi3_cs_pins {
|
||||
- brcm,pins = <0 24>;
|
||||
- brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
- };
|
||||
-
|
||||
spi4_pins: spi4_pins {
|
||||
brcm,pins = <5 6 7>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
@@ -394,38 +327,12 @@
|
||||
brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
};
|
||||
|
||||
- spi5_pins: spi5_pins {
|
||||
- brcm,pins = <13 14 15>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
- };
|
||||
-
|
||||
- spi5_cs_pins: spi5_cs_pins {
|
||||
- brcm,pins = <12 26>;
|
||||
- brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
- };
|
||||
-
|
||||
- spi6_pins: spi6_pins {
|
||||
- brcm,pins = <19 20 21>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT3>;
|
||||
- };
|
||||
-
|
||||
- spi6_cs_pins: spi6_cs_pins {
|
||||
- brcm,pins = <18 27>;
|
||||
- brcm,function = <BCM2835_FSEL_GPIO_OUT>;
|
||||
- };
|
||||
-
|
||||
i2c0_pins: i2c0 {
|
||||
brcm,pins = <0 1>;
|
||||
brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
- i2c1_pins: i2c1 {
|
||||
- brcm,pins = <2 3>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
- brcm,pull = <BCM2835_PUD_UP>;
|
||||
- };
|
||||
-
|
||||
i2c3_pins: i2c3 {
|
||||
brcm,pins = <4 5>;
|
||||
brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
@@ -438,23 +345,6 @@
|
||||
brcm,pull = <BCM2835_PUD_UP>;
|
||||
};
|
||||
|
||||
- i2c5_pins: i2c5 {
|
||||
- brcm,pins = <12 13>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
- brcm,pull = <BCM2835_PUD_UP>;
|
||||
- };
|
||||
-
|
||||
- i2c6_pins: i2c6 {
|
||||
- brcm,pins = <22 23>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT5>;
|
||||
- brcm,pull = <BCM2835_PUD_UP>;
|
||||
- };
|
||||
-
|
||||
- i2s_pins: i2s {
|
||||
- brcm,pins = <18 19 20 21>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT0>;
|
||||
- };
|
||||
-
|
||||
sdio_pins: sdio_pins {
|
||||
brcm,pins = <34 35 36 37 38 39>;
|
||||
brcm,function = <BCM2835_FSEL_ALT3>; // alt3 = SD1
|
||||
@@ -498,28 +388,12 @@
|
||||
brcm,pull = <0 2>;
|
||||
};
|
||||
|
||||
- uart5_pins: uart5_pins {
|
||||
- brcm,pins = <12 13>;
|
||||
- brcm,function = <BCM2835_FSEL_ALT4>;
|
||||
- brcm,pull = <0 2>;
|
||||
- };
|
||||
};
|
||||
|
||||
&i2c0if {
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
-&i2c1 {
|
||||
- pinctrl-names = "default";
|
||||
- pinctrl-0 = <&i2c1_pins>;
|
||||
- clock-frequency = <100000>;
|
||||
-};
|
||||
-
|
||||
-&i2s {
|
||||
- pinctrl-names = "default";
|
||||
- pinctrl-0 = <&i2s_pins>;
|
||||
-};
|
||||
-
|
||||
// =============================================
|
||||
// Board specific stuff here
|
||||
|
||||
@@ -554,6 +428,81 @@
|
||||
linux,default-trigger = "default-on";
|
||||
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
+
|
||||
+ wlan2g {
|
||||
+ label = "wlan2g";
|
||||
+ gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wlan5g {
|
||||
+ label = "wlan5g";
|
||||
+ gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ wan {
|
||||
+ label = "wan";
|
||||
+ gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g1 {
|
||||
+ label = "5g1";
|
||||
+ gpios = <&gpio 21 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g2 {
|
||||
+ label = "5g2";
|
||||
+ gpios = <&gpio 20 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g3 {
|
||||
+ label = "5g3";
|
||||
+ gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g4 {
|
||||
+ label = "5g4";
|
||||
+ gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g5 {
|
||||
+ label = "5g5";
|
||||
+ gpios = <&gpio 10 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5g6 {
|
||||
+ label = "5g6";
|
||||
+ gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr1 {
|
||||
+ label = "5gpwr1";
|
||||
+ gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr2 {
|
||||
+ label = "5gpwr2";
|
||||
+ gpios = <&gpio 19 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr3 {
|
||||
+ label = "5gpwr3";
|
||||
+ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr4 {
|
||||
+ label = "5gpwr4";
|
||||
+ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr5 {
|
||||
+ label = "5gpwr5";
|
||||
+ gpios = <&gpio 23 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
+
|
||||
+ 5gpwr6 {
|
||||
+ label = "5gpwr6";
|
||||
+ gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&pwm1 {
|
||||
@@ -583,21 +532,6 @@
|
||||
eth_led0 = <&phy1>,"led-modes:0";
|
||||
eth_led1 = <&phy1>,"led-modes:4";
|
||||
|
||||
- ant1 = <&ant1>,"output-high?=on",
|
||||
- <&ant1>, "output-low?=off",
|
||||
- <&ant2>, "output-high?=off",
|
||||
- <&ant2>, "output-low?=on";
|
||||
- ant2 = <&ant1>,"output-high?=off",
|
||||
- <&ant1>, "output-low?=on",
|
||||
- <&ant2>, "output-high?=on",
|
||||
- <&ant2>, "output-low?=off";
|
||||
- noant = <&ant1>,"output-high?=off",
|
||||
- <&ant1>, "output-low?=on",
|
||||
- <&ant2>, "output-high?=off",
|
||||
- <&ant2>, "output-low?=on";
|
||||
-
|
||||
sd_poll_once = <&emmc2>, "non-removable?";
|
||||
- spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
|
||||
- <&spi0>, "dmas:8=", <&dma40>;
|
||||
};
|
||||
};
|
||||
\ No newline at end of file
|
Loading…
Add table
Add a link
Reference in a new issue