diff --git a/root/target/linux/bcm27xx/patches-5.4/950-0785-ARM-dts-Add-bcm2711-rpi-cm4.dts.patch b/root/target/linux/bcm27xx/patches-5.4/950-0785-ARM-dts-Add-bcm2711-rpi-cm4.dts.patch
index 3b51d422..cf5d6c7d 100755
--- a/root/target/linux/bcm27xx/patches-5.4/950-0785-ARM-dts-Add-bcm2711-rpi-cm4.dts.patch
+++ b/root/target/linux/bcm27xx/patches-5.4/950-0785-ARM-dts-Add-bcm2711-rpi-cm4.dts.patch
@@ -7,9 +7,10 @@ Add initial DTS file for Compute Module 4.
 
 Signed-off-by: Phil Elwell <phil@raspberrypi.com>
 ---
- arch/arm/boot/dts/Makefile            |   2 +-
- arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 467 ++++++++++++++++++++++++++
- 2 files changed, 487 insertions(+), 1 deletion(-)
+ arch/arm/boot/dts/Makefile            |   3 +-
+ arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 586 ++++++++++++++++++++++++++
+ arch/arm/boot/dts/overlays/README     |   6 +
+ 3 files changed, 594 insertions(+), 1 deletion(-)
  create mode 100644 arch/arm/boot/dts/bcm2711-rpi-cm4.dts
 
 --- a/arch/arm/boot/dts/Makefile
@@ -26,7 +27,7 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
  	alpine-db.dtb
 --- /dev/null
 +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
-@@ -0,0 +1,467 @@
+@@ -0,0 +1,494 @@
 +// SPDX-License-Identifier: GPL-2.0
 +/dts-v1/;
 +#include "bcm2711.dtsi"
@@ -493,4 +494,46 @@ Signed-off-by: Phil Elwell <phil@raspberrypi.com>
 +&ddc1 {
 +	status = "disabled";
 +};
-+
\ No newline at end of file
++
++/ {
++	__overrides__ {
++		act_led_gpio = <&act_led>,"gpios:4";
++		act_led_activelow = <&act_led>,"gpios:8";
++		act_led_trigger = <&act_led>,"linux,default-trigger";
++
++		pwr_led_gpio = <&pwr_led>,"gpios:4";
++		pwr_led_activelow = <&pwr_led>,"gpios:8";
++		pwr_led_trigger = <&pwr_led>,"linux,default-trigger";
++
++		eth_led0 = <&phy1>,"led-modes:0";
++		eth_led1 = <&phy1>,"led-modes:4";
++
++		ant2 =  <&ant1>,"output-high?=off",
++			<&ant1>, "output-low?=on",
++			<&ant2>, "output-high?=on",
++			<&ant2>, "output-low?=off";
++		noant = <&ant1>,"output-high?=off",
++			<&ant1>, "output-low?=on",
++			<&ant2>, "output-high?=off",
++			<&ant2>, "output-low?=on";
++
++		sd_poll_once = <&emmc2>, "non-removable?";
++		spi_dma4 = <&spi0>, "dmas:0=", <&dma40>,
++			   <&spi0>, "dmas:8=", <&dma40>;
++	};
++};
+--- a/arch/arm/boot/dts/overlays/README
++++ b/arch/arm/boot/dts/overlays/README
+@@ -92,6 +92,12 @@ Name:   <The base DTB>
+ Info:   Configures the base Raspberry Pi hardware
+ Load:   <loaded automatically>
+ Params:
++        ant1                    Select antenna 1 (default). CM4 only.
++
++        ant2                    Select antenna 2. CM4 only.
++
++        noant                   Disable both antennas. CM4 only.
++
+         audio                   Set to "on" to enable the onboard ALSA audio
+                                 interface (default "off")
+