mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
Update RUTX config/tools for 6.1 kernel
This commit is contained in:
Ycarus (Yannick Chabanois)
parent
0fd066f6ce
commit
facff1658d
7 changed files with 8 additions and 748 deletions
|
|
@ -53,6 +53,8 @@ ensure_correct_art
|
|||
case "$FIRMWARE" in
|
||||
"ath10k/pre-cal-ahb-a000000.wifi.bin")
|
||||
case "$board" in
|
||||
teltonika,rutx50|\
|
||||
teltonika,rutx12|\
|
||||
teltonika,rutx)
|
||||
ath10kcal_extract "0:ART" 4096 12064
|
||||
;;
|
||||
|
|
@ -60,6 +62,8 @@ case "$FIRMWARE" in
|
|||
;;
|
||||
"ath10k/pre-cal-ahb-a800000.wifi.bin")
|
||||
case "$board" in
|
||||
teltonika,rutx50|\
|
||||
teltonika,rutx12|\
|
||||
teltonika,rutx)
|
||||
ath10kcal_extract "0:ART" 20480 12064
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -12,6 +12,8 @@ PHYNBR=${DEVPATH##*/phy}
|
|||
board=$(board_name)
|
||||
|
||||
case "$board" in
|
||||
teltonika,rutx12|\
|
||||
teltonika,rutx50|\
|
||||
teltonika,rutx)
|
||||
mac_addr=$(mtd_get_mac_binary 0:CONFIG 0)
|
||||
if [ "$mac_addr" != "ff:ff:ff:ff:ff:ff" ]; then
|
||||
|
|
|
|||
|
|
@ -13,7 +13,7 @@ PIDCOUNT=1
|
|||
start_service() {
|
||||
. /lib/functions
|
||||
|
||||
[ "$(board_name)" != "teltonika,rutx" ] && return 0
|
||||
[ "$(board_name)" != "teltonika,rutx" ] && [ "$(board_name)" != "teltonika,rutx50" ] && [ "$(board_name)" != "teltonika,rutx12" ] && return 0
|
||||
local pid_file="/var/run/${NAME}.${PIDCOUNT}.pid"
|
||||
|
||||
procd_open_instance
|
||||
|
|
|
|||
|
|
@ -25,7 +25,7 @@ start() {
|
|||
|
||||
local board=$(board_name)
|
||||
case "$board" in
|
||||
teltonika,rutx | ap-dk01.1-c1 | ap-dk01.1-c2 | ap-dk04.1-c1 | ap-dk04.1-c2 | ap-dk04.1-c3 | \
|
||||
teltonika,rutx | teltonika,rutx50 | teltonika,rutx12 | ap-dk01.1-c1 | ap-dk01.1-c2 | ap-dk04.1-c1 | ap-dk04.1-c2 | ap-dk04.1-c3 | \
|
||||
ap-dk04.1-c4 | ap-dk04.1-c5 | ap-dk05.1-c1 | ap-dk06.1-c1 | ap-dk07.1-c1 | ap-dk07.1-c2 | ap-dk07.1-c3)
|
||||
ipq40xx_power_auto ;;
|
||||
esac
|
||||
|
|
|
|||
|
|
@ -1,383 +0,0 @@
|
|||
find_mmc_part() {
|
||||
local DEVNAME PARTNAME
|
||||
|
||||
if grep -q "$1" /proc/mtd; then
|
||||
echo "" && return 0
|
||||
fi
|
||||
|
||||
for DEVNAME in /sys/block/mmcblk0/mmcblk*p*; do
|
||||
PARTNAME=$(grep PARTNAME ${DEVNAME}/uevent | cut -f2 -d'=')
|
||||
[ "$PARTNAME" = "$1" ] && echo "/dev/$(basename $DEVNAME)" && return 0
|
||||
done
|
||||
}
|
||||
|
||||
get_full_section_name() {
|
||||
local img=$1
|
||||
local sec=$2
|
||||
|
||||
dumpimage -l ${img} | grep "^ Image.*(${sec})" | \
|
||||
sed 's,^ Image.*(\(.*\)),\1,'
|
||||
}
|
||||
|
||||
image_contains() {
|
||||
local img=$1
|
||||
local sec=$2
|
||||
dumpimage -l ${img} | grep -q "^ Image.*(${sec}.*)" || return 1
|
||||
}
|
||||
|
||||
print_sections() {
|
||||
local img=$1
|
||||
|
||||
dumpimage -l ${img} | awk '/^ Image.*(.*)/ { print gensub(/Image .* \((.*)\)/,"\\1", $0) }'
|
||||
}
|
||||
|
||||
image_has_mandatory_section() {
|
||||
local img=$1
|
||||
local mandatory_sections=$2
|
||||
|
||||
for sec in ${mandatory_sections}; do
|
||||
image_contains $img ${sec} || {\
|
||||
return 1
|
||||
}
|
||||
done
|
||||
}
|
||||
|
||||
image_demux() {
|
||||
local img=$1
|
||||
|
||||
for sec in $(print_sections ${img}); do
|
||||
local fullname=$(get_full_section_name ${img} ${sec})
|
||||
|
||||
local position=$(dumpimage -l ${img} | grep "(${fullname})" | awk '{print $2}')
|
||||
dumpimage -i ${img} -o /tmp/${fullname}.bin -T "flat_dt" -p "${position}" ${fullname} > /dev/null || { \
|
||||
echo "Error while extracting \"${sec}\" from ${img}"
|
||||
return 1
|
||||
}
|
||||
done
|
||||
return 0
|
||||
}
|
||||
|
||||
image_is_FIT() {
|
||||
if ! dumpimage -l $1 > /dev/null 2>&1; then
|
||||
echo "$1 is not a valid FIT image"
|
||||
return 1
|
||||
fi
|
||||
return 0
|
||||
}
|
||||
|
||||
switch_layout() {
|
||||
local layout=$1
|
||||
local boot_layout=`find / -name boot_layout`
|
||||
|
||||
# Layout switching is only required as the boot images (up to u-boot)
|
||||
# use 512 user data bytes per code word, whereas Linux uses 516 bytes.
|
||||
# It's only applicable for NAND flash. So let's return if we don't have
|
||||
# one.
|
||||
|
||||
[ -n "$boot_layout" ] || return
|
||||
|
||||
case "${layout}" in
|
||||
boot|1) echo 1 > $boot_layout;;
|
||||
linux|0) echo 0 > $boot_layout;;
|
||||
*) echo "Unknown layout \"${layout}\"";;
|
||||
esac
|
||||
}
|
||||
|
||||
do_flash_mtd() {
|
||||
local bin=$1
|
||||
local mtdname=$2
|
||||
local append=""
|
||||
|
||||
local mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
|
||||
local pgsz=$(cat /sys/class/mtd/${mtdpart}/writesize)
|
||||
[ -f "$CONF_TAR" -a "$SAVE_CONFIG" -eq 1 -a "$2" == "rootfs" ] && append="-j $CONF_TAR"
|
||||
|
||||
dd if=/tmp/${bin}.bin bs=${pgsz} conv=sync | mtd $append -e "/dev/${mtdpart}" write - "/dev/${mtdpart}"
|
||||
}
|
||||
|
||||
do_flash_emmc() {
|
||||
local bin=$1
|
||||
local emmcblock=$2
|
||||
|
||||
dd if=/dev/zero of=${emmcblock}
|
||||
dd if=/tmp/${bin}.bin of=${emmcblock}
|
||||
}
|
||||
|
||||
do_flash_partition() {
|
||||
local bin=$1
|
||||
local mtdname=$2
|
||||
local emmcblock="$(find_mmc_part "$mtdname")"
|
||||
|
||||
if [ -e "$emmcblock" ]; then
|
||||
do_flash_emmc $bin $emmcblock
|
||||
else
|
||||
do_flash_mtd $bin $mtdname
|
||||
fi
|
||||
}
|
||||
|
||||
do_flash_bootconfig() {
|
||||
local bin=$1
|
||||
local mtdname=$2
|
||||
|
||||
# Fail safe upgrade
|
||||
if [ -f /proc/boot_info/getbinary_${bin} ]; then
|
||||
cat /proc/boot_info/getbinary_${bin} > /tmp/${bin}.bin
|
||||
do_flash_partition $bin $mtdname
|
||||
fi
|
||||
}
|
||||
|
||||
do_flash_failsafe_partition() {
|
||||
local bin=$1
|
||||
local mtdname=$2
|
||||
local emmcblock
|
||||
local primaryboot
|
||||
|
||||
# Fail safe upgrade
|
||||
[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
|
||||
default_mtd=$mtdname
|
||||
mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
|
||||
primaryboot=$(cat /proc/boot_info/$default_mtd/primaryboot)
|
||||
if [ $primaryboot -eq 0 ]; then
|
||||
echo 1 > /proc/boot_info/$default_mtd/primaryboot
|
||||
else
|
||||
echo 0 > /proc/boot_info/$default_mtd/primaryboot
|
||||
fi
|
||||
}
|
||||
|
||||
emmcblock="$(find_mmc_part "$mtdname")"
|
||||
|
||||
if [ -e "$emmcblock" ]; then
|
||||
do_flash_emmc $bin $emmcblock
|
||||
else
|
||||
do_flash_mtd $bin $mtdname
|
||||
fi
|
||||
|
||||
}
|
||||
|
||||
do_flash_ubi() {
|
||||
local bin=$1
|
||||
local mtdname=$2
|
||||
local mtdpart
|
||||
local primaryboot
|
||||
|
||||
mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
|
||||
ubidetach -p /dev/${mtdpart}
|
||||
|
||||
# Fail safe upgrade
|
||||
[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
|
||||
primaryboot=$(cat /proc/boot_info/$mtdname/primaryboot)
|
||||
if [ $primaryboot -eq 0 ]; then
|
||||
echo 1 > /proc/boot_info/$mtdname/primaryboot
|
||||
else
|
||||
echo 0 > /proc/boot_info/$mtdname/primaryboot
|
||||
fi
|
||||
|
||||
mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
|
||||
}
|
||||
|
||||
mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
|
||||
ubiformat /dev/${mtdpart} -y -f /tmp/${bin}.bin
|
||||
}
|
||||
|
||||
do_flash_tz() {
|
||||
local sec=$1
|
||||
local mtdpart=$(grep "\"0:QSEE\"" /proc/mtd | awk -F: '{print $1}')
|
||||
local emmcblock="$(find_mmc_part "0:QSEE")"
|
||||
|
||||
if [ -n "$mtdpart" -o -e "$emmcblock" ]; then
|
||||
do_flash_failsafe_partition ${sec} "0:QSEE"
|
||||
else
|
||||
do_flash_failsafe_partition ${sec} "0:TZ"
|
||||
fi
|
||||
}
|
||||
|
||||
do_flash_ddr() {
|
||||
local sec=$1
|
||||
local mtdpart=$(grep "\"0:CDT\"" /proc/mtd | awk -F: '{print $1}')
|
||||
local emmcblock="$(find_mmc_part "0:CDT")"
|
||||
|
||||
if [ -n "$mtdpart" -o -e "$emmcblock" ]; then
|
||||
do_flash_failsafe_partition ${sec} "0:CDT"
|
||||
else
|
||||
do_flash_failsafe_partition ${sec} "0:DDRPARAMS"
|
||||
fi
|
||||
}
|
||||
|
||||
to_upper () {
|
||||
echo $1 | awk '{print toupper($0)}'
|
||||
}
|
||||
|
||||
flash_section() {
|
||||
local sec=$1
|
||||
|
||||
local board=$(board_name)
|
||||
case "${sec}" in
|
||||
hlos*) switch_layout linux; do_flash_failsafe_partition ${sec} "0:HLOS";;
|
||||
rootfs*) switch_layout linux; do_flash_failsafe_partition ${sec} "rootfs";;
|
||||
fs*) switch_layout linux; do_flash_failsafe_partition ${sec} "rootfs";;
|
||||
ubi*) switch_layout linux; do_flash_ubi ${sec} "rootfs";;
|
||||
#sbl1*) switch_layout boot; do_flash_partition ${sec} "0:SBL1";;
|
||||
#sbl2*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:SBL2";;
|
||||
#sbl3*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:SBL3";;
|
||||
#mibib*) switch_layout boot; do_flash_partition ${sec} "0:MIBIB";;
|
||||
#dtb-$(to_upper $board)*) switch_layout boot; do_flash_partition ${sec} "0:DTB";;
|
||||
u-boot*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:APPSBL";;
|
||||
#ddr-$(to_upper $board)*) switch_layout boot; do_flash_ddr ${sec};;
|
||||
ddr-${board}-*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:CDT";;
|
||||
#ssd*) switch_layout boot; do_flash_partition ${sec} "0:SSD";;
|
||||
tz*) switch_layout boot; do_flash_tz ${sec};;
|
||||
#rpm*) switch_layout boot; do_flash_failsafe_partition ${sec} "0:RPM";;
|
||||
*) echo "Section ${sec} ignored"; return 1;;
|
||||
esac
|
||||
|
||||
echo "Flashed ${sec}"
|
||||
}
|
||||
|
||||
erase_emmc_config() {
|
||||
local emmcblock="$(find_mmc_part "rootfs_data")"
|
||||
if [ -e "$emmcblock" ]; then
|
||||
dd if=/dev/zero of=${emmcblock}
|
||||
mkfs.ext4 "$emmcblock"
|
||||
fi
|
||||
}
|
||||
|
||||
platform_pre_upgrade() {
|
||||
cp /sbin/upgraded /tmp
|
||||
ubus call system nandupgrade "{\"path\": \"$1\" }"
|
||||
}
|
||||
|
||||
platform_check_image_ipq() {
|
||||
local board=$(board_name)
|
||||
|
||||
local mandatory_nand="ubi"
|
||||
local mandatory_nor_emmc="hlos fs"
|
||||
local mandatory_nor="hlos"
|
||||
local mandatory_section_found=0
|
||||
local optional="sbl2 u-boot ddr-${board} ssd tz rpm"
|
||||
local ignored="mibib bootconfig sbl1"
|
||||
|
||||
image_is_FIT $1 || return 1
|
||||
|
||||
image_has_mandatory_section $1 ${mandatory_nand} && {\
|
||||
mandatory_section_found=1
|
||||
}
|
||||
|
||||
image_has_mandatory_section $1 ${mandatory_nor_emmc} && {\
|
||||
mandatory_section_found=1
|
||||
}
|
||||
|
||||
image_has_mandatory_section $1 ${mandatory_nor} && {\
|
||||
mandatory_section_found=1
|
||||
}
|
||||
|
||||
if [ $mandatory_section_found -eq 0 ]; then
|
||||
echo "Error: mandatory section(s) missing from \"$1\". Abort..."
|
||||
return 1
|
||||
fi
|
||||
|
||||
for sec in ${optional}; do
|
||||
image_contains $1 ${sec} || {\
|
||||
echo "Warning: optional section \"${sec}\" missing from \"$1\". Continue..."
|
||||
}
|
||||
done
|
||||
|
||||
for sec in ${ignored}; do
|
||||
image_contains $1 ${sec} && {\
|
||||
echo "Warning: section \"${sec}\" will be ignored from \"$1\". Continue..."
|
||||
}
|
||||
done
|
||||
|
||||
image_demux $1 || {\
|
||||
echo "Error: \"$1\" couldn't be extracted. Abort..."
|
||||
return 1
|
||||
}
|
||||
|
||||
[ -f /tmp/hlos_version ] && rm -f /tmp/*_version
|
||||
dumpimage -c $1 2>/dev/null
|
||||
return $?
|
||||
}
|
||||
|
||||
platform_version_upgrade() {
|
||||
local version_files="appsbl_version sbl_version tz_version hlos_version rpm_version"
|
||||
local sys="/sys/devices/system/qfprom/qfprom0/"
|
||||
local tmp="/tmp/"
|
||||
|
||||
for file in $version_files; do
|
||||
[ -f "${tmp}${file}" ] && {
|
||||
echo "Updating "${sys}${file}" with `cat "${tmp}${file}"`"
|
||||
echo `cat "${tmp}${file}"` > "${sys}${file}"
|
||||
rm -f "${tmp}${file}"
|
||||
}
|
||||
done
|
||||
}
|
||||
|
||||
|
||||
# The U-Boot loader of the OpenMesh devices requires image sizes and
|
||||
# checksums to be provided in the U-Boot environment.
|
||||
# The OpenMesh devices come with 2 main partitions - while one is active
|
||||
# sysupgrade will flash the other. The boot order is changed to boot the
|
||||
# newly flashed partition. If the new partition can't be booted due to
|
||||
# upgrade failures the previously used partition is loaded.
|
||||
|
||||
platform_do_upgrade_ipq() {
|
||||
local board=$(board_name)
|
||||
|
||||
# verify some things exist before erasing
|
||||
if [ ! -e $1 ]; then
|
||||
echo "Error: Can't find $1 after switching to ramfs, aborting upgrade!"
|
||||
reboot
|
||||
fi
|
||||
|
||||
for sec in $(print_sections $1); do
|
||||
if [ ! -e /tmp/${sec}.bin ]; then
|
||||
echo "Error: Cant' find ${sec} after switching to ramfs, aborting upgrade!"
|
||||
reboot
|
||||
fi
|
||||
done
|
||||
|
||||
case "$board" in
|
||||
teltonika,rutx)
|
||||
for sec in $(print_sections $1); do
|
||||
flash_section ${sec}
|
||||
done
|
||||
|
||||
switch_layout linux
|
||||
# update bootconfig to register that fw upgrade has been done
|
||||
do_flash_bootconfig bootconfig "0:BOOTCONFIG"
|
||||
do_flash_bootconfig bootconfig1 "0:BOOTCONFIG1"
|
||||
platform_version_upgrade
|
||||
|
||||
erase_emmc_config
|
||||
return 0;
|
||||
;;
|
||||
esac
|
||||
|
||||
echo "Upgrade failed!"
|
||||
return 1;
|
||||
}
|
||||
|
||||
platform_copy_config_ipq() {
|
||||
local emmcblock="$(find_mmc_part "rootfs_data")"
|
||||
mkdir -p /tmp/overlay
|
||||
|
||||
if [ -e "$emmcblock" ]; then
|
||||
mount -t ext4 "$emmcblock" /tmp/overlay
|
||||
cp /tmp/sysupgrade.tgz /tmp/overlay/
|
||||
sync
|
||||
umount /tmp/overlay
|
||||
else
|
||||
local mtdname=rootfs
|
||||
local mtdpart
|
||||
|
||||
[ -f /proc/boot_info/$mtdname/upgradepartition ] && {
|
||||
mtdname=$(cat /proc/boot_info/$mtdname/upgradepartition)
|
||||
}
|
||||
|
||||
mtdpart=$(grep "\"${mtdname}\"" /proc/mtd | awk -F: '{print $1}')
|
||||
ubiattach -p /dev/${mtdpart}
|
||||
mount -t ubifs ubi0:rootfs_data /tmp/overlay
|
||||
cp /tmp/sysupgrade.tgz /tmp/overlay/
|
||||
sync
|
||||
umount /tmp/overlay
|
||||
fi
|
||||
}
|
||||
|
|
@ -1,216 +0,0 @@
|
|||
PART_NAME=firmware
|
||||
REQUIRE_IMAGE_METADATA=1
|
||||
|
||||
RAMFS_COPY_BIN='fw_printenv fw_setenv'
|
||||
RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock'
|
||||
|
||||
platform_check_image() {
|
||||
case "$(board_name)" in
|
||||
asus,rt-ac42u |\
|
||||
asus,rt-ac58u)
|
||||
local ubidev=$(nand_find_ubi $CI_UBIPART)
|
||||
local asus_root=$(nand_find_volume $ubidev jffs2)
|
||||
|
||||
[ -n "$asus_root" ] || return 0
|
||||
|
||||
cat << EOF
|
||||
jffs2 partition is still present.
|
||||
There's probably no space left
|
||||
to install the filesystem.
|
||||
|
||||
You need to delete the jffs2 partition first:
|
||||
# ubirmvol /dev/ubi0 --name=jffs2
|
||||
|
||||
Once this is done. Retry.
|
||||
EOF
|
||||
return 1
|
||||
;;
|
||||
teltonika,rutx)
|
||||
platform_check_image_ipq "$1"
|
||||
;;
|
||||
zte,mf286d)
|
||||
CI_UBIPART="rootfs"
|
||||
local mtdnum="$( find_mtd_index $CI_UBIPART )"
|
||||
[ ! "$mtdnum" ] && return 1
|
||||
ubiattach -m "$mtdnum" || true
|
||||
local ubidev="$( nand_find_ubi $CI_UBIPART )"
|
||||
local ubi_rootfs=$(nand_find_volume $ubidev ubi_rootfs)
|
||||
local ubi_rootfs_data=$(nand_find_volume $ubidev ubi_rootfs_data)
|
||||
|
||||
[ -n "$ubi_rootfs" ] || [ -n "$ubi_rootfs_data" ] || return 0
|
||||
|
||||
cat << EOF
|
||||
ubi_rootfs partition is still present.
|
||||
|
||||
You need to delete the stock partition first:
|
||||
# ubirmvol /dev/ubi0 -N ubi_rootfs
|
||||
Please also delete ubi_rootfs_data, if exist:
|
||||
# ubirmvol /dev/ubi0 -N ubi_rootfs_data
|
||||
|
||||
Once this is done. Retry.
|
||||
EOF
|
||||
return 1
|
||||
;;
|
||||
esac
|
||||
return 0;
|
||||
}
|
||||
|
||||
askey_do_upgrade() {
|
||||
local tar_file="$1"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
|
||||
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
|
||||
zyxel_do_upgrade() {
|
||||
local tar_file="$1"
|
||||
|
||||
local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
|
||||
tar Oxf $tar_file ${board_dir}/kernel | mtd write - kernel
|
||||
|
||||
if [ -n "$UPGRADE_BACKUP" ]; then
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd -j "$UPGRADE_BACKUP" write - rootfs
|
||||
else
|
||||
tar Oxf $tar_file ${board_dir}/root | mtd write - rootfs
|
||||
fi
|
||||
}
|
||||
|
||||
platform_do_upgrade_mikrotik_nand() {
|
||||
local fw_mtd=$(find_mtd_part kernel)
|
||||
fw_mtd="${fw_mtd/block/}"
|
||||
[ -n "$fw_mtd" ] || return
|
||||
|
||||
local board_dir=$(tar tf "$1" | grep -m 1 '^sysupgrade-.*/$')
|
||||
board_dir=${board_dir%/}
|
||||
[ -n "$board_dir" ] || return
|
||||
|
||||
local kernel_len=$(tar xf "$1" ${board_dir}/kernel -O | wc -c)
|
||||
[ -n "$kernel_len" ] || return
|
||||
|
||||
tar xf "$1" ${board_dir}/kernel -O | ubiformat "$fw_mtd" -y -S $kernel_len -f -
|
||||
|
||||
CI_KERNPART="none"
|
||||
nand_do_upgrade "$1"
|
||||
}
|
||||
|
||||
platform_do_upgrade() {
|
||||
case "$(board_name)" in
|
||||
8dev,jalapeno |\
|
||||
aruba,ap-303 |\
|
||||
aruba,ap-303h |\
|
||||
aruba,ap-365 |\
|
||||
avm,fritzbox-7530 |\
|
||||
avm,fritzrepeater-1200 |\
|
||||
avm,fritzrepeater-3000 |\
|
||||
buffalo,wtr-m2133hp |\
|
||||
cilab,meshpoint-one |\
|
||||
edgecore,ecw5211 |\
|
||||
edgecore,oap100 |\
|
||||
engenius,eap2200 |\
|
||||
glinet,gl-ap1300 |\
|
||||
luma,wrtq-329acn |\
|
||||
mobipromo,cm520-79f |\
|
||||
netgear,wac510 |\
|
||||
p2w,r619ac-64m |\
|
||||
p2w,r619ac-128m |\
|
||||
qxwlan,e2600ac-c2)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
glinet,gl-b2200)
|
||||
CI_KERNPART="0:HLOS"
|
||||
CI_ROOTPART="rootfs"
|
||||
CI_DATAPART="rootfs_data"
|
||||
emmc_do_upgrade "$1"
|
||||
;;
|
||||
alfa-network,ap120c-ac)
|
||||
part="$(awk -F 'ubi.mtd=' '{printf $2}' /proc/cmdline | sed -e 's/ .*$//')"
|
||||
if [ "$part" = "rootfs1" ]; then
|
||||
fw_setenv active 2 || exit 1
|
||||
CI_UBIPART="rootfs2"
|
||||
else
|
||||
fw_setenv active 1 || exit 1
|
||||
CI_UBIPART="rootfs1"
|
||||
fi
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
asus,map-ac2200)
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
asus,rt-ac42u |\
|
||||
asus,rt-ac58u)
|
||||
CI_KERNPART="linux"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
cellc,rtl30vw)
|
||||
CI_UBIPART="ubifs"
|
||||
askey_do_upgrade "$1"
|
||||
;;
|
||||
compex,wpj419)
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
linksys,ea6350v3 |\
|
||||
linksys,ea8300 |\
|
||||
linksys,mr8300)
|
||||
platform_do_upgrade_linksys "$1"
|
||||
;;
|
||||
meraki,mr33)
|
||||
CI_KERNPART="part.safe"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
mikrotik,cap-ac|\
|
||||
mikrotik,hap-ac2|\
|
||||
mikrotik,lhgg-60ad|\
|
||||
mikrotik,sxtsq-5-ac)
|
||||
[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
mikrotik,hap-ac3)
|
||||
platform_do_upgrade_mikrotik_nand "$1"
|
||||
;;
|
||||
netgear,rbr50 |\
|
||||
netgear,rbs50 |\
|
||||
netgear,srr60 |\
|
||||
netgear,srs60)
|
||||
platform_do_upgrade_netgear_orbi_upgrade "$1"
|
||||
;;
|
||||
openmesh,a42 |\
|
||||
openmesh,a62 |\
|
||||
plasmacloud,pa1200 |\
|
||||
plasmacloud,pa2200)
|
||||
PART_NAME="inactive"
|
||||
platform_do_upgrade_dualboot_datachk "$1"
|
||||
;;
|
||||
teltonika,rutx)
|
||||
platform_do_upgrade_ipq "$1"
|
||||
;;
|
||||
zte,mf286d)
|
||||
CI_UBIPART="rootfs"
|
||||
nand_do_upgrade "$1"
|
||||
;;
|
||||
zyxel,nbg6617)
|
||||
zyxel_do_upgrade "$1"
|
||||
;;
|
||||
*)
|
||||
default_do_upgrade "$1"
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
platform_copy_config() {
|
||||
case "$(board_name)" in
|
||||
glinet,gl-b2200)
|
||||
emmc_copy_config
|
||||
;;
|
||||
teltonika,rutx)
|
||||
platform_copy_config_ipq
|
||||
;;
|
||||
esac
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -1,147 +0,0 @@
|
|||
#!/bin/sh
|
||||
|
||||
. /lib/functions.sh
|
||||
. /lib/functions/system.sh
|
||||
|
||||
export IMAGE="$1"
|
||||
COMMAND="$2"
|
||||
|
||||
export INTERACTIVE=0
|
||||
export VERBOSE=1
|
||||
export CONFFILES=/tmp/sysupgrade.conffiles
|
||||
|
||||
RAMFS_COPY_BIN= # extra programs for temporary ramfs root
|
||||
RAMFS_COPY_DATA= # extra data files
|
||||
|
||||
include /lib/upgrade
|
||||
|
||||
|
||||
supivot() { # <new_root> <old_root>
|
||||
/bin/mount | grep "on $1 type" 2>&- 1>&- || /bin/mount -o bind $1 $1
|
||||
mkdir -p $1$2 $1/proc $1/sys $1/dev $1/tmp $1/overlay && \
|
||||
/bin/mount -o noatime,move /proc $1/proc && \
|
||||
pivot_root $1 $1$2 || {
|
||||
/bin/umount -l $1 $1
|
||||
return 1
|
||||
}
|
||||
|
||||
/bin/mount -o noatime,move $2/sys /sys
|
||||
/bin/mount -o noatime,move $2/dev /dev
|
||||
/bin/mount -o noatime,move $2/tmp /tmp
|
||||
/bin/mount -o noatime,move $2/overlay /overlay 2>&-
|
||||
return 0
|
||||
}
|
||||
|
||||
switch_to_ramfs() {
|
||||
for binary in \
|
||||
/bin/busybox /bin/ash /bin/sh /bin/mount /bin/umount \
|
||||
pivot_root mount_root reboot sync kill sleep \
|
||||
md5sum hexdump cat zcat bzcat dd tar \
|
||||
ls basename find cp mv rm mkdir rmdir mknod touch chmod \
|
||||
'[' printf wc grep awk sed cut \
|
||||
mtd partx losetup mkfs.ext4 nandwrite flash_erase \
|
||||
ubiupdatevol ubiattach ubiblock ubiformat \
|
||||
ubidetach ubirsvol ubirmvol ubimkvol \
|
||||
snapshot snapshot_tool date jshn dtbtool dtc mkbootimg \
|
||||
ubinize-image.sh sysupgrade-tar.sh which ubinize mktemp \
|
||||
dumpimage ledman fwtool \
|
||||
$RAMFS_COPY_BIN
|
||||
do
|
||||
local file="$(command -v "$binary" 2>/dev/null)"
|
||||
[ -n "$file" ] && install_bin "$file"
|
||||
done
|
||||
install_file /etc/resolv.conf \
|
||||
/lib/*.sh \
|
||||
/lib/functions/*.sh \
|
||||
/lib/upgrade/*.sh \
|
||||
/lib/upgrade/do_stage2 \
|
||||
/usr/share/libubox/jshn.sh \
|
||||
/etc/board.json \
|
||||
$RAMFS_COPY_DATA
|
||||
|
||||
[ -L "/lib64" ] && ln -s /lib $RAM_ROOT/lib64
|
||||
|
||||
supivot $RAM_ROOT /mnt || {
|
||||
v "Failed to switch over to ramfs. Please reboot."
|
||||
exit 1
|
||||
}
|
||||
|
||||
/bin/mount -o remount,ro /mnt
|
||||
/bin/umount -l /mnt
|
||||
|
||||
grep /overlay /proc/mounts > /dev/null && {
|
||||
/bin/mount -o noatime,remount,ro /overlay
|
||||
/bin/umount -l /overlay
|
||||
}
|
||||
}
|
||||
|
||||
kill_remaining() { # [ <signal> [ <loop> ] ]
|
||||
local loop_limit=10
|
||||
|
||||
local sig="${1:-TERM}"
|
||||
local loop="${2:-0}"
|
||||
local run=true
|
||||
local stat
|
||||
local proc_ppid=$(cut -d' ' -f4 /proc/$$/stat)
|
||||
|
||||
vn "Sending $sig to remaining processes ..."
|
||||
|
||||
while $run; do
|
||||
run=false
|
||||
for stat in /proc/[0-9]*/stat; do
|
||||
[ -f "$stat" ] || continue
|
||||
|
||||
local pid name state ppid rest
|
||||
read pid name state ppid rest < $stat
|
||||
name="${name#(}"; name="${name%)}"
|
||||
|
||||
# Skip PID1, our parent, ourself and our children
|
||||
[ $pid -ne 1 -a $pid -ne $proc_ppid -a $pid -ne $$ -a $ppid -ne $$ ] || continue
|
||||
|
||||
local cmdline
|
||||
read cmdline < /proc/$pid/cmdline
|
||||
|
||||
# Skip kernel threads
|
||||
[ -n "$cmdline" ] || continue
|
||||
|
||||
_vn " $name"
|
||||
kill -$sig $pid 2>/dev/null
|
||||
|
||||
[ $loop -eq 1 ] && run=true
|
||||
done
|
||||
|
||||
let loop_limit--
|
||||
[ $loop_limit -eq 0 ] && {
|
||||
_v
|
||||
v "Failed to kill all processes."
|
||||
exit 1
|
||||
}
|
||||
done
|
||||
_v
|
||||
}
|
||||
|
||||
[ -n "$(pgrep telnetd)" ] && {
|
||||
killall -9 telnetd
|
||||
}
|
||||
|
||||
[ -n "$(pgrep dropbear)" ] && {
|
||||
killall -9 dropbear
|
||||
}
|
||||
|
||||
killall -9 ash
|
||||
|
||||
kill_remaining TERM
|
||||
sleep 3
|
||||
kill_remaining KILL 1
|
||||
|
||||
sleep 1
|
||||
|
||||
echo 3 > /proc/sys/vm/drop_caches
|
||||
|
||||
if [ -n "$(rootfs_type)" ]; then
|
||||
v "Switching to ramdisk..."
|
||||
switch_to_ramfs
|
||||
fi
|
||||
|
||||
# Exec new shell from ramfs
|
||||
exec /bin/busybox ash -c "$COMMAND"
|
||||
Loading…
Add table
Add a link
Reference in a new issue