diff --git a/root/package/firmware/ipq-wifi/Makefile b/root/package/firmware/ipq-wifi/Makefile
index ec529970..b43b5e02 100755
--- a/root/package/firmware/ipq-wifi/Makefile
+++ b/root/package/firmware/ipq-wifi/Makefile
@@ -43,13 +43,12 @@ ALLWIFIBOARDS:= \
 	linksys_ea8300 \
 	linksys_mr8300-v0 \
 	luma_wrtq-329acn \
-	mikrotik_hap-ac2 \
-	mikrotik_sxtsq-5-ac \
 	mobipromo_cm520-79f \
 	nec_wg2600hp3 \
 	plasmacloud_pa1200 \
 	plasmacloud_pa2200 \
   pangu_l1000 \
+  p2w_r619ac \
 	qxwlan_e2600ac
 
 ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
@@ -129,13 +128,12 @@ $(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
 $(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
 $(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
 $(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
-$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
-$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
 $(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
-$(eval $(call generate-ipq-wifi-package,pangu_l1000,PANGU L1000))
 $(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
 $(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
 $(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
+$(eval $(call generate-ipq-wifi-package,pangu_l1000,PANGU L1000))
+$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
 
-$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
+$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
\ No newline at end of file
diff --git a/root/package/firmware/ipq-wifi/board-p2w_r619ac.qca4019 b/root/package/firmware/ipq-wifi/board-p2w_r619ac.qca4019
new file mode 100755
index 00000000..0ebe2857
Binary files /dev/null and b/root/package/firmware/ipq-wifi/board-p2w_r619ac.qca4019 differ
diff --git a/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
old mode 100755
new mode 100644
index 620c29b8..a2a69eae
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (C) 2015 OpenWrt.org
 #
@@ -46,14 +45,6 @@ engenius,ens620ext)
 	ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0"
 	ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1"
 	;;
-mikrotik,sxtsq-5-ac)
-	ucidef_set_rssimon "wlan0" "200000" "1"
-	ucidef_set_led_rssi "rssilow" "rssilow" "green:rssilow" "wlan0" "1" "100"
-	ucidef_set_led_rssi "rssimediumlow" "rssimediumlow" "green:rssimediumlow" "wlan0" "21" "100"
-	ucidef_set_led_rssi "rssimedium" "rssimedium" "green:rssimedium" "wlan0" "41" "100"
-	ucidef_set_led_rssi "rssimediumhigh" "rssimediumhigh" "green:rssimediumhigh" "wlan0" "61" "100"
-	ucidef_set_led_rssi "rssihigh" "rssihigh" "green:rssihigh" "wlan0" "81" "100"
-	;;
 mobipromo,cm520-79f)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
 	ucidef_set_led_switch "lan1" "LAN1" "blue:lan1" "switch0" "0x10"
@@ -75,6 +66,14 @@ zbt,z4019)
 	ucidef_set_led_netdev "wwan1" "4G1" "green:4g2" "wwan1"
 	ucidef_set_led_netdev "wwan2" "4G2" "green:4g3" "wwan2"
 	;;
+8dev,jalapeno)
+	ucidef_set_led_default "power" "POWER" "blue:power" "1"
+    ucidef_set_led_wlan "wlan2g" "WLAN2G" "blue:wlan2g" "phy0tpt"
+	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
+	ucidef_set_led_netdev "4g1" "4g1" "blue:4g1" "4g1"
+	ucidef_set_led_netdev "4g2" "4g2" "blue:4g2" "4g2"
+	ucidef_set_led_netdev "4g3" "4g3" "blue:4g3" "4g3"
+    ;;
 netgear,ex6100v2 |\
 netgear,ex6150v2)
 	ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:router" "phy0tpt"
@@ -94,4 +93,4 @@ esac
 
 board_config_flush
 
-exit 0
+exit 0
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/base-files/etc/board.d/02_network b/root/target/linux/ipq40xx/base-files/etc/board.d/02_network
old mode 100755
new mode 100644
index 735d65e5..0752f8be
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -1,4 +1,3 @@
-#!/bin/sh
 #
 # Copyright (c) 2015 The Linux Foundation. All rights reserved.
 # Copyright (c) 2011-2015 OpenWrt.org
@@ -29,7 +28,6 @@ ipq40xx_setup_interfaces()
 	engenius,eap1300|\
 	engenius,emd1|\
 	meraki,mr33|\
-	mikrotik,sxtsq-5-ac|\
 	netgear,ex6100v2|\
 	netgear,ex6150v2|\
 	zyxel,wre6606)
@@ -49,7 +47,6 @@ ipq40xx_setup_interfaces()
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
 	asus,rt-ac58u|\
-	mikrotik,hap-ac2|\
 	zyxel,nbg6617)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
@@ -57,7 +54,7 @@ ipq40xx_setup_interfaces()
 		;;
 	avm,fritzbox-4040|\
 	linksys,ea6350v3|\
-	pangu,l1000|\
+    pangu,l1000|\
 	linksys,ea8300|\
 	linksys,mr8300)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
@@ -113,7 +110,7 @@ ipq40xx_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan"
 		;;
-		zbt,z4019)
+        zbt,z4019)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		ucidef_add_switch "switch0" \
 			"0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
@@ -167,7 +164,7 @@ ipq40xx_setup_macs()
 		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
 		label_mac=$wan_mac
 		;;
-	zbt,z4019)
+    zbt,z4019)
 		wan_mac=$(mtd_get_mac_binary "0:ART" 0x0)
 		lan_mac=$(mtd_get_mac_binary "0:ART" 0x6)
 		;;
@@ -182,15 +179,6 @@ ipq40xx_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
 		lan_mac=$(macaddr_add "$wan_mac" 1)
 		;;
-	mikrotik,hap-ac2)
-		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
-		lan_mac=$(macaddr_add $wan_mac 1)
-		label_mac="$wan_mac"
-		;;
-	mikrotik,sxtsq-5-ac)
-		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
-		label_mac="$lan_mac"
-		;;
 	esac
 
 	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
@@ -204,4 +192,4 @@ ipq40xx_setup_interfaces $board
 ipq40xx_setup_macs $board
 board_config_flush
 
-exit 0
+exit 0
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
old mode 100755
new mode 100644
index c255707f..a15f60b8
--- a/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
+++ b/root/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches
@@ -1,5 +1,3 @@
-#!/bin/sh
-
 . /lib/functions/uci-defaults.sh
 
 board_config_update
@@ -23,4 +21,4 @@ esac
 
 board_config_flush
 
-exit 0
+exit 0
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
old mode 100755
new mode 100644
index a488156f..f073af48
--- a/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/root/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -9,14 +9,10 @@ board=$(board_name)
 case "$FIRMWARE" in
 "ath10k/cal-pci-0000:01:00.0.bin")
 	case "$board" in
-	pangu,l1000)
-		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add "$(cat /sys/class/net/eth0/address)" 2)
-		;;
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x9000 0x844
 		caldata_valid "4408" || caldata_extract "ART" 0x9000 0x844
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +1)
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 1)
 		;;
 	esac
 	;;
@@ -132,7 +128,7 @@ case "$FIRMWARE" in
 		;;
 	engenius,ens620ext)
 		caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +2)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
@@ -146,7 +142,7 @@ case "$FIRMWARE" in
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x1000 0x2f20
 		caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +2)
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2)
 		;;
 	mikrotik,hap-ac2)
 		wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data"
@@ -158,13 +154,15 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0x0)
 		;;
+	netgear,wac510)
+		caldata_extract "0:ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_binary "0:MANUDATA" 0x6)
+		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) -2)
 		;;
-	esac
-	;;
 	zbt,z4019)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:ART" 0x6) +1)
@@ -190,7 +188,7 @@ case "$FIRMWARE" in
 	aruba,ap-303h |\
 	aruba,ap-365)
 		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary mfginfo 0x1D) 1)
 		;;
 	asus,map-ac2200)
 		caldata_extract_ubi "Factory" 0x5000 0x2f20
@@ -243,15 +241,15 @@ case "$FIRMWARE" in
 		;;
 	engenius,emd1)
 		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV wlanaddr) 1)
 		;;
 	engenius,emr3500)
 		caldata_extract "0:ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) +1)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:APPSBLENV ethaddr) 1)
 		;;
 	engenius,ens620ext)
 		caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) +3)
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
@@ -265,7 +263,7 @@ case "$FIRMWARE" in
 	meraki,mr33)
 		caldata_extract_ubi "ART" 0x5000 0x2f20
 		caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20
-		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) +3)
+		ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3)
 		;;
 	mikrotik,hap-ac2|\
 	mikrotik,sxtsq-5-ac)
@@ -278,6 +276,10 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_binary dnidata 0xc)
 		;;
+	netgear,wac510)
+		caldata_extract "0:ART" 0x5000 0x2f20
+		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_binary "0:MANUDATA" 0x6) 16)
+		;;
 	zyxel,nbg6617 |\
 	zyxel,wre6606)
 		caldata_extract "ART" 0x5000 0x2f20
@@ -292,4 +294,4 @@ case "$FIRMWARE" in
 *)
 	exit 1
 	;;
-esac
+esac
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh b/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
index f1dc81f7..c7ee381f 100755
--- a/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/upgrade/linksys.sh
@@ -47,6 +47,10 @@ linksys_get_target_firmware() {
 	esac
 }
 
+linksys_get_root_magic() {
+	(get_image "$@" | dd skip=786432 bs=4 count=1 | hexdump -v -n 4 -e '1/1 "%02x"') 2>/dev/null
+}
+
 platform_do_upgrade_linksys() {
 	local magic_long="$(get_magic_long "$1")"
 
@@ -96,7 +100,23 @@ platform_do_upgrade_linksys() {
 	}
 
 	[ "$magic_long" = "27051956" ] && {
-		echo "writing \"$1\" image to \"$part_label\""
-		get_image "$1" | mtd write - "$part_label"
+		# This magic is for a uImage (which is a sysupgrade image)
+		# check firmwares' rootfs types
+		local oldroot="$(linksys_get_root_magic "$target_mtd")"
+		local newroot="$(linksys_get_root_magic "$1")"
+
+		if [ "$newroot" = "55424923" ] && [ "$oldroot" = "55424923" ]; then
+			# we're upgrading from a firmware with UBI to one with UBI
+			# erase everything to be safe
+			# - Is that really needed? Won't remove (or comment) the if,
+			#   because it may be needed in a future device.
+			#mtd erase $part_label
+			#get_image "$1" | mtd -n write - $part_label
+			echo "writing \"$1\" UBI image to \"$part_label\" (UBI)..."
+			get_image "$1" | mtd write - "$part_label"
+		else
+			echo "writing \"$1\" image to \"$part_label\""
+			get_image "$1" | mtd write - "$part_label"
+		fi
 	}
-}
+}
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
old mode 100755
new mode 100644
index 9cf6e154..2ed19f12
--- a/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
+++ b/root/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh
@@ -59,7 +59,7 @@ platform_do_upgrade() {
 	case "$(board_name)" in
 	8dev,jalapeno |\
 	aruba,ap-303 |\
-	pangu,l1000 |\
+    pangu,l1000 |\
 	aruba,ap-303h |\
 	aruba,ap-365 |\
 	avm,fritzbox-7530 |\
@@ -74,6 +74,8 @@ platform_do_upgrade() {
 	luma,wrtq-329acn |\
 	zbt,z4019 |\
 	mobipromo,cm520-79f |\
+    p2w,r619ac-64m |\
+ 	p2w,r619ac-128m |\
 	qxwlan,e2600ac-c2)
 		nand_do_upgrade "$1"
 		;;
@@ -113,11 +115,6 @@ platform_do_upgrade() {
 		CI_KERNPART="part.safe"
 		nand_do_upgrade "$1"
 		;;
-	mikrotik,hap-ac2|\
-	mikrotik,sxtsq-5-ac)
-		[ "$(rootfs_type)" = "tmpfs" ] && mtd erase firmware
-		default_do_upgrade "$1"
-		;;
 	openmesh,a42 |\
 	openmesh,a62 |\
 	plasmacloud,pa1200 |\
@@ -132,4 +129,4 @@ platform_do_upgrade() {
 		default_do_upgrade "$1"
 		;;
 	esac
-}
+}
\ No newline at end of file
diff --git a/root/target/linux/ipq40xx/image/generic.mk b/root/target/linux/ipq40xx/image/generic.mk
old mode 100755
new mode 100644
index 60b905af..cc8eefec
--- a/root/target/linux/ipq40xx/image/generic.mk
+++ b/root/target/linux/ipq40xx/image/generic.mk
@@ -35,7 +35,7 @@ define Device/DniImage
 	IMAGES += factory.img
 	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
 	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
-		append-rootfs | pad-rootfs | append-metadata | check-size
+		append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 
 define Build/append-rootfshdr
@@ -62,6 +62,7 @@ define Build/mkmylofw_32m
 	@mv $@.new $@
 endef
 
+
 define Build/qsdk-ipq-factory-nand-askey
 	$(TOPDIR)/scripts/mkits-qsdk-ipq-image.sh $@.its\
 		askey_kernel $(IMAGE_KERNEL) \
@@ -96,7 +97,7 @@ define Device/8dev_habanero-dvk
 	IMAGE_SIZE := 30976k
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
-	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
+	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 TARGET_DEVICES += 8dev_habanero-dvk
 
@@ -212,7 +213,7 @@ define Device/avm_fritzbox-4040
 	UBOOT_PARTITION_SIZE := 524288
 	IMAGES += eva.bin
 	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 	DEVICE_PACKAGES := fritz-tffs fritz-caldata
 endef
 TARGET_DEVICES += avm_fritzbox-4040
@@ -499,6 +500,18 @@ define Device/glinet_gl-ap1300
 endef
 TARGET_DEVICES += glinet_gl-ap1300
 
+define Device/glinet_gl-b1300
+	$(call Device/FitzImage)
+	DEVICE_VENDOR := GL.iNet
+	DEVICE_MODEL := GL-B1300
+	BOARD_NAME := gl-b1300
+	SOC := qcom-ipq4029
+	KERNEL_SIZE := 4096k
+	IMAGE_SIZE := 26624k
+	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
+endef
+TARGET_DEVICES += glinet_gl-b1300
+
 define Device/zbt_z4019
 	$(call Device/FitImage)
 	$(call Device/UbiFit)
@@ -511,20 +524,8 @@ define Device/zbt_z4019
 endef
 TARGET_DEVICES += zbt_z4019
 
-define Device/glinet_gl-b1300
-	$(call Device/FitImage)
-	DEVICE_VENDOR := GL.iNet
-	DEVICE_MODEL := GL-B1300
-	BOARD_NAME := gl-b1300
-	SOC := qcom-ipq4029
-	KERNEL_SIZE := 4096k
-	IMAGE_SIZE := 26624k
-	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
-endef
-TARGET_DEVICES += glinet_gl-b1300
-
 define Device/glinet_gl-s1300
-	$(call Device/FitImage)
+	$(call Device/FitzImage)
 	DEVICE_VENDOR := GL.iNet
 	DEVICE_MODEL := GL-S1300
 	SOC := qcom-ipq4029
@@ -827,7 +828,7 @@ define Device/zyxel_wre6606
 	DEVICE_DTS_CONFIG := config@4
 	SOC := qcom-ipq4018
 	IMAGE_SIZE := 13184k
-	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef
 TARGET_DEVICES += zyxel_wre6606
diff --git a/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch b/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
index 3cea070c..51cd7da5 100755
--- a/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
+++ b/root/target/linux/ipq40xx/patches-5.4/901-arm-boot-add-dts-files.patch
@@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org>
 
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
-@@ -837,11 +837,62 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+@@ -837,11 +837,60 @@ dtb-$(CONFIG_ARCH_QCOM) += \
  	qcom-apq8074-dragonboard.dtb \
  	qcom-apq8084-ifc6540.dtb \
  	qcom-apq8084-mtp.dtb \
@@ -31,8 +31,6 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4018-gl-ap1300.dtb \
 +	qcom-ipq4018-jalapeno.dtb \
 +	qcom-ipq4018-meshpoint-one.dtb \
-+	qcom-ipq4018-hap-ac2.dtb \
-+	qcom-ipq4018-sxtsq-5-ac.dtb \
 +	qcom-ipq4018-nbg6617.dtb \
 +	qcom-ipq4019-oap100.dtb \
 +	qcom-ipq4018-pa1200.dtb \
@@ -72,4 +70,4 @@ Signed-off-by: John Crispin <john@phrozen.org>
 +	qcom-ipq4019-z4019.dtb \
  	qcom-ipq8064-ap148.dtb \
  	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8960-cdp.dtb \
\ No newline at end of file