#include "qcom-ipq4019-ap.dk01.1.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include "platform_name.dtsi"

/ {
	compatible = "teltonika,rutx", "qcom,ap-dk01.1-c2", "qcom,ipq4019";

	memory {
		device_type = "memory";
		reg = <0x80000000 0x10000000>;
	};

	soc {
		mdio@90000 {
			status = "ok";
			pinctrl-0 = <&mdio_pins>;
			pinctrl-names = "default";
			phy-reset-gpio = <&tlmm 62 0>;

			ethphy4: ethernet-phy@4 {
				qcom,fiber-enable;
			};
		};

		pinctrl@1000000 {
			mdio_pins: mdio_pinmux {
				mux_1 {
					pins = "gpio53";
					function = "mdio";
					bias-pull-up;
				};
				mux_2 {
					pins = "gpio52";
					function = "mdc";
					bias-pull-up;
				};
			};
		};

		spi_0: spi@78b5000 {
			cs-gpios = <&tlmm 54 0>, <&tlmm 63 0>;
			num-cs = <2>;

			mx25l25635f@0 {
				compatible = "n25q128a11", "mx25l25635f", "jedec,spi-nor";
				#address-cells = <1>;
				#size-cells = <1>;
				reg = <0>;
				spi-max-frequency = <24000000>;
			};

			mt29f@1 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "spi-nand","spinand,mt29f";
				reg = <1>;
				spi-max-frequency = <24000000>;
			};
		};

		gpio_keys {
			compatible = "gpio-keys";

			reset {
				label = "reset";
				gpios = <&tlmm 4 1>;
				linux,code = <0x198>;
			};
		};

		usb3: usb3@8af8800 {
			dwc3@8a00000 {
				snps,dis_u2_susphy_quirk;
				snps,dis_u3_susphy_quirk;
			};
		};

		usb2: usb2@60f8800 {
			dwc3@6000000 {
				snps,dis_u2_susphy_quirk;
			};
		};
	};
};