#include "qcom-ipq4018-rutx-STM32.dtsi"

/ {
	model = "RUTX09 STM32";

	soc {
		gpio-export {
			compatible = "gpio-export";
			#size-cells = <0>;

			gpio_modem_reset {
				gpio-export,name = "modem_reset";
				gpio-export,output = <0>;
				gpios = <&stm32_io 21 GPIO_ACTIVE_HIGH>;
			};

			gpio_modem_power {
				gpio-export,name = "modem_power";
				gpio-export,output = <0>;
				gpios = <&stm32_io 20 GPIO_ACTIVE_HIGH>;
			};

			gpio_sim_select {
				gpio-export,name = "sim_sel";
				gpio-export,output = <1>;
				gpios = <&stm32_io 22 GPIO_ACTIVE_LOW>;
			};

			gpio_out_1 {
				gpio-export,name = "gpio23";
				gpio-export,output = <0>;
				gpio-export,direction_may_change;
				gpios = <&stm32_io 23 GPIO_ACTIVE_HIGH>;
			};

			gpio_in_1 {
				gpio-export,name = "gpio24";
				gpio-export,input = <0>;
				gpio-export,direction_may_change;
				gpios = <&stm32_io 24 GPIO_ACTIVE_LOW>;
			};
		};

		leds {
			compatible = "gpio-leds";

			led_wan_sim1 {
				label = "wan_sim_1";
				gpios = <&stm32_io 0 GPIO_ACTIVE_HIGH>;
			};

			led_wan_sim2 {
				label = "wan_sim_2";
				gpios = <&stm32_io 1 GPIO_ACTIVE_HIGH>;
			};
			
			led_wan_eth {
				label = "wan_eth_3";
				gpios = <&stm32_io 2 GPIO_ACTIVE_HIGH>;
			};

			led_gen_2 {
				label = "mob_gen_2";
				gpios = <&stm32_io 4 GPIO_ACTIVE_HIGH>;
			};

			led_gen_3 {
				label = "mob_gen_3";
				gpios = <&stm32_io 5 GPIO_ACTIVE_HIGH>;
			};

			led_gen_4 {
				label = "mob_gen_4";
				gpios = <&stm32_io 6 GPIO_ACTIVE_HIGH>;
			};

			led_ssid_1 {
				label = "mob_ssid_1";
				gpios = <&stm32_io 7 GPIO_ACTIVE_HIGH>;
				linux,default-trigger = "timer";
			};

			led_ssid_2 {
				label = "mob_ssid_2";
				gpios = <&stm32_io 8 GPIO_ACTIVE_HIGH>;
				linux,default-trigger = "timer";
			};

			led_ssid_3 {
				label = "mob_ssid_3";
				gpios = <&stm32_io 9 GPIO_ACTIVE_HIGH>;
				linux,default-trigger = "timer";
			};

			led_ssid_4 {
				label = "mob_ssid_4";
				gpios = <&stm32_io 10 GPIO_ACTIVE_HIGH>;
				linux,default-trigger = "timer";
			};

			led_ssid_5 {
				label = "mob_ssid_5";
				gpios = <&stm32_io 11 GPIO_ACTIVE_HIGH>;
				linux,default-trigger = "timer";
			};
		};
	};
};