openmptcprouter/6.1/target/linux/bcm27xx/patches-6.1/950-0865-Input-Add-raspberrypi-button-firmware-driver.patch

From aa0d94945eacf05c088bd2cab46edcab8c7ef820 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Wed, 2 Aug 2023 11:30:48 +0100
Subject: [PATCH] Input: Add raspberrypi-button firmware driver

Raspberry Pi 5s have a power/suspend button that is only accessible to
the firmware. Add a driver to read it and generate key events.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
 drivers/input/misc/Kconfig                 |  10 ++
 drivers/input/misc/Makefile                |   1 +
 drivers/input/misc/raspberrypi-button.c    | 138 +++++++++++++++++++++
 include/soc/bcm2835/raspberrypi-firmware.h |   1 +
 4 files changed, 150 insertions(+)
 create mode 100644 drivers/input/misc/raspberrypi-button.c

--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -918,6 +918,16 @@ config INPUT_RT5120_PWRKEY
 	  To compile this driver as a module, choose M here. the module will
 	  be called rt5120-pwrkey.
 
+config INPUT_RASPBERRYPI_BUTTON
+	tristate "Raspberry Pi button support"
+	depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE)
+	help
+	  This enables support for firmware-controlled buttons on Raspberry
+	  Pi devices.
+
+	  To compile this driver as a module, choose M here. the module will
+	  be called raspberrypi-button.
+
 config INPUT_STPMIC1_ONKEY
 	tristate "STPMIC1 PMIC Onkey support"
 	depends on MFD_STPMIC1
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -70,6 +70,7 @@ obj-$(CONFIG_INPUT_RAVE_SP_PWRBUTTON)	+=
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
 obj-$(CONFIG_INPUT_REGULATOR_HAPTIC)	+= regulator-haptic.o
 obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
+obj-$(CONFIG_INPUT_RASPBERRYPI_BUTTON)	+= raspberrypi-button.o
 obj-$(CONFIG_INPUT_RT5120_PWRKEY)	+= rt5120-pwrkey.o
 obj-$(CONFIG_INPUT_AXP20X_PEK)		+= axp20x-pek.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
--- /dev/null
+++ b/drivers/input/misc/raspberrypi-button.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Driver for Raspberry Pi power button
+ *
+ * Copyright (C) 2023 Raspberry Pi Ltd.
+ *
+ * This driver is based on drivers/hwmon/raspberrypi-hwmon.c and
+ * input/misc/pm8941-pwrkey.c/ - see original files for copyright information
+ */
+
+#include <linux/delay.h>
+#include <linux/devm-helpers.h>
+#include <dt-bindings/input/raspberrypi-button.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+#include <soc/bcm2835/raspberrypi-firmware.h>
+
+struct rpi_button {
+	struct device *dev;
+	struct rpi_firmware *fw;
+	struct input_dev *input;
+	struct delayed_work poll_work;
+	unsigned long poll_rate;
+	const char *name;
+	u32 id;
+	u32 code;
+};
+
+static void button_poll(struct work_struct *work)
+{
+	struct rpi_button *button;
+	u32 value;
+	int err;
+
+	button = container_of(work, struct rpi_button,
+			      poll_work.work);
+
+	value = BIT(button->id);
+	err = rpi_firmware_property(button->fw, RPI_FIRMWARE_GET_BUTTONS_PRESSED,
+				    &value, sizeof(value));
+	if (err) {
+		dev_err_once(button->dev, "GET_BUTTON_PRESSED not implemented?\n");
+		return;
+	}
+
+	if (value & BIT(button->id)) {
+		input_event(button->input, EV_KEY, button->code, 1);
+		input_sync(button->input);
+		input_event(button->input, EV_KEY, button->code, 0);
+		input_sync(button->input);
+	}
+
+	schedule_delayed_work(&button->poll_work, button->poll_rate);
+}
+
+static int rpi_button_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpi_button *button;
+	int err;
+
+	button = devm_kzalloc(dev, sizeof(*button), GFP_KERNEL);
+	if (!button)
+		return -ENOMEM;
+
+	button->dev = dev;
+
+	/* Get the firmware pointer from our parent */
+	button->fw = dev_get_drvdata(dev->parent);
+
+	if (device_property_read_u32(dev, "id", &button->id))
+		button->id = RASPBERRYPI_BUTTON_POWER;
+
+	if (device_property_read_string(dev, "label", &button->name))
+		button->name = "raspberrypi-button";
+
+	if (device_property_read_u32(dev, "linux,code", &button->code)) {
+		dev_err(&pdev->dev, "no linux,code property\n");
+		return -EINVAL;
+	}
+
+	button->input = devm_input_allocate_device(dev);
+	if (!button->input) {
+		dev_dbg(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_set_capability(button->input, EV_KEY, button->code);
+
+	button->input->name = button->name;
+	button->input->phys = "raspberrypi-button/input0";
+	button->input->dev.parent = dev;
+	button->poll_rate = HZ;
+
+	err = input_register_device(button->input);
+	if (err) {
+		dev_err(&pdev->dev, "failed to register input device: %d\n",
+			err);
+		return err;
+	}
+
+	err = devm_delayed_work_autocancel(dev, &button->poll_work,
+					   button_poll);
+	if (err)
+		return err;
+
+	platform_set_drvdata(pdev, button);
+	schedule_delayed_work(&button->poll_work, button->poll_rate);
+
+	return 0;
+}
+
+static const struct of_device_id rpi_button_match[] = {
+	{ .compatible = "raspberrypi,firmware-button", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, rpi_button_match);
+
+static struct platform_driver rpi_button_driver = {
+	.probe = rpi_button_probe,
+	.driver = {
+		.name = "raspberrypi-button",
+		.of_match_table = of_match_ptr(rpi_button_match),
+	},
+};
+module_platform_driver(rpi_button_driver);
+
+MODULE_AUTHOR("Phil Elwell <phil@raspberrypi.com>");
+MODULE_DESCRIPTION("Raspberry Pi button driver");
+MODULE_LICENSE("Dual BSD/GPL");
--- a/include/soc/bcm2835/raspberrypi-firmware.h
+++ b/include/soc/bcm2835/raspberrypi-firmware.h
@@ -98,6 +98,7 @@ enum rpi_firmware_property_tag {
 	RPI_FIRMWARE_GET_REBOOT_FLAGS =                       0x00030064,
 	RPI_FIRMWARE_SET_REBOOT_FLAGS =                       0x00038064,
 	RPI_FIRMWARE_NOTIFY_DISPLAY_DONE =                    0x00030066,
+	RPI_FIRMWARE_GET_BUTTONS_PRESSED =                    0x00030088,
 
 	/* Dispmanx TAGS */
 	RPI_FIRMWARE_FRAMEBUFFER_ALLOCATE =                   0x00040001,