mirror of
https://github.com/Ysurac/openmptcprouter.git
synced 2025-03-09 15:40:20 +00:00
114 lines
4 KiB
Diff
114 lines
4 KiB
Diff
From c28a2eea0d35f0d9db2dbedf3a98f68ab1260437 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 21 Jan 2019 21:17:27 +0000
|
|
Subject: [PATCH 314/432] overlays: Add ssd1306 overlay for OLED display
|
|
|
|
See: https://github.com/raspberrypi/firmware/issues/1098
|
|
|
|
Signed-off-by: mincepi <mincepi@gmail.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 31 ++++++++++++++++
|
|
.../arm/boot/dts/overlays/ssd1306-overlay.dts | 36 +++++++++++++++++++
|
|
3 files changed, 68 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/ssd1306-overlay.dts
|
|
|
|
diff --git a/arch/arm/boot/dts/overlays/Makefile b/arch/arm/boot/dts/overlays/Makefile
|
|
index 38046efd5fdd..5c07ff08e141 100644
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -135,6 +135,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
spi2-1cs.dtbo \
|
|
spi2-2cs.dtbo \
|
|
spi2-3cs.dtbo \
|
|
+ ssd1306.dtbo \
|
|
superaudioboard.dtbo \
|
|
sx150x.dtbo \
|
|
tc358743.dtbo \
|
|
diff --git a/arch/arm/boot/dts/overlays/README b/arch/arm/boot/dts/overlays/README
|
|
index ed582bc37375..707ea49cb6b3 100644
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1950,6 +1950,37 @@ Params: cs0_pin GPIO pin for CS0 (default 43 - BCM SPI2_CE0).
|
|
is 'okay' or enabled).
|
|
|
|
|
|
+Name: ssd1306
|
|
+Info: Overlay for activation of SSD1306 over I2C OLED display framebuffer.
|
|
+Load: dtoverlay=ssd1306,<param>=<val>
|
|
+Params: address Location in display memory of first character.
|
|
+ (default=0)
|
|
+ width Width of display. (default=128)
|
|
+ height Height of display. (default=64)
|
|
+ offset virtual channel a. (default=0)
|
|
+ normal Has no effect on displays tested. (default=not
|
|
+ set)
|
|
+ sequential Set this if every other scan line is missing.
|
|
+ (default=not set)
|
|
+ remapped Set this if display is garbled. (default=not
|
|
+ set)
|
|
+ inverted Set this if display is inverted and mirrored.
|
|
+ (default=not set)
|
|
+
|
|
+ Examples:
|
|
+ Typical usage for 128x64 display: dtoverlay=ssd1306,inverted
|
|
+
|
|
+ Typical usage for 128x32 display: dtoverlay=ssd1306,inverted,sequential
|
|
+
|
|
+ i2c_baudrate=400000 will speed up the display.
|
|
+
|
|
+ i2c_baudrate=1000000 seems to work even though it's not officially
|
|
+ supported by the hardware, and is faster still.
|
|
+
|
|
+ For more information refer to the device datasheet at:
|
|
+ https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf
|
|
+
|
|
+
|
|
Name: superaudioboard
|
|
Info: Configures the SuperAudioBoard sound card
|
|
Load: dtoverlay=superaudioboard,<param>=<val>
|
|
diff --git a/arch/arm/boot/dts/overlays/ssd1306-overlay.dts b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts
|
|
new file mode 100644
|
|
index 000000000000..2cf677d59a7f
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/ssd1306-overlay.dts
|
|
@@ -0,0 +1,36 @@
|
|
+// Overlay for SSD1306 128x64 and 128x32 OLED displays
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2718";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&i2c1>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ ssd1306: oled@3c{
|
|
+ compatible = "solomon,ssd1306fb-i2c";
|
|
+ reg = <0x3c>;
|
|
+ solomon,width = <128>;
|
|
+ solomon,height = <64>;
|
|
+ solomon,page-offset = <0>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ address = <&ssd1306>,"reg:0";
|
|
+ width = <&ssd1306>,"solomon,width:0";
|
|
+ height = <&ssd1306>,"solomon,height:0";
|
|
+ offset = <&ssd1306>,"solomon,page-offset:0";
|
|
+ normal = <&ssd1306>,"solomon,segment-no-remap?";
|
|
+ sequential = <&ssd1306>,"solomon,com-seq?";
|
|
+ remapped = <&ssd1306>,"solomon,com-lrremap?";
|
|
+ inverted = <&ssd1306>,"solomon,com-invdir?";
|
|
+ };
|
|
+};
|
|
--
|
|
2.19.1
|
|
|