mirror of
				https://github.com/Ysurac/openmptcprouter.git
				synced 2025-03-09 15:40:20 +00:00 
			
		
		
		
	
		
			
				
	
	
		
			2700 lines
		
	
	
	
		
			67 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
			
		
		
	
	
			2700 lines
		
	
	
	
		
			67 KiB
		
	
	
	
		
			Diff
		
	
	
	
	
	
| From 534d648531d473e683fc37fbc21eb22162619179 Mon Sep 17 00:00:00 2001
 | |
| From: Naushir Patuck <naush@raspberrypi.com>
 | |
| Date: Thu, 7 May 2020 15:50:54 +0100
 | |
| Subject: [PATCH] media: i2c: imx477: Support for the Sony IMX477 sensor
 | |
| 
 | |
| dt-bindings: media: i2c: Add IMX477 CMOS sensor binding
 | |
| 
 | |
| Add YAML device tree binding for IMX477 CMOS image sensor.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: Add driver for Sony IMX477 sensor
 | |
| 
 | |
| Adds a driver for the 12MPix Sony IMX477 CSI2 sensor.
 | |
| Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver
 | |
| currently only supports 2 lanes.
 | |
| 
 | |
| The following Bayer modes are currently available:
 | |
| 
 | |
| 4056x3040 12-bit @ 10fps
 | |
| 2028x1520 12-bit (binned) @ 40fps
 | |
| 2028x1050 12-bit (cropped/binned) @ 50fps
 | |
| 1012x760 10-bit (scaled) @ 120 fps
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Add support for adaptive frame control
 | |
| 
 | |
| Use V4L2_CID_EXPOSURE_AUTO_PRIORITY to control if the driver should
 | |
| automatically adjust the sensor frame length based on exposure time,
 | |
| allowing variable frame rates and longer exposures.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Return correct result on sensor id verification
 | |
| 
 | |
| The test should return -EIO if the register read id does not match
 | |
| the expected sensor id.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Parse and register properties
 | |
| 
 | |
| Parse device properties and register controls for them using the V4L2
 | |
| fwnode properties helpers.
 | |
| 
 | |
| Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 | |
| 
 | |
| media: i2c: imx477: Selection compliance fixes
 | |
| 
 | |
| To comply with the intended usage of the V4L2 selection target when
 | |
| used to retrieve a sensor image properties, adjust the rectangles
 | |
| returned by the imx477 driver.
 | |
| 
 | |
| The top/left crop coordinates of the TGT_CROP rectangle were set to
 | |
| (0, 0) instead of (8, 16) which is the offset from the larger physical
 | |
| pixel array rectangle. This was also a mismatch with the default values
 | |
| crop rectangle value, so this is corrected. Found with v4l2-compliance.
 | |
| 
 | |
| While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
 | |
| CROP_BOUNDS have the same size as the non-active pixels are not readable
 | |
| using the selection API. Found with v4l2-compliance.
 | |
| 
 | |
| This commit mirrors 543790f777ba1b3264c168c653db6d415e7c983f done for
 | |
| the imx219 sensor.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Remove auto frame length adjusting
 | |
| 
 | |
| The V4L2_CID_EXPOSURE_AUTO_PRIORITY was used to let the sensor control
 | |
| frame length (effectively framerate) based on the requested exposure
 | |
| time requested. Remove this feature as it is never used, and goes
 | |
| against how V4L2 likes to handle exposure and vblank controls.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Add very long exposure control to the driver
 | |
| 
 | |
| Add support for very long exposures by using the exposure multiplier
 | |
| register. Userland does not need to pass any additional controls to
 | |
| enable long exposures, it simply requests a larger vblank to extend the
 | |
| exposure control range appropriately.
 | |
| 
 | |
| Currently, since hblank is fixed, a maximum of approximately 124 seconds
 | |
| of exposure time can be used. In a future change, hblank could also be
 | |
| controlled in userland to give over 200 seconds of exposure time.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Fix crop height for 2028x1080 mode
 | |
| 
 | |
| The crop height for this mode was set at 2600 lines, it should be 2160
 | |
| lines instead.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Replace existing 1012x760 mode
 | |
| 
 | |
| The existing 1012x760 120 fps mode has significant IQ problem using
 | |
| the internal sensor scaler. Replace this mode with a 1332x990 120 fps
 | |
| mode instead. This new mode has a smaller field of view, but does not
 | |
| suffer from the bad IQ of the original mode.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Remove internal v4l2_mbus_framefmt from the state
 | |
| 
 | |
| The only field in this struct that is used is the format code, so
 | |
| replace the struct with this single field.
 | |
| 
 | |
| Save the format code in imx477_set_pad_format() when setting up a new
 | |
| mode so that imx477_get_pad_format() performs the right lookup.
 | |
| Otherwise, this caused a bug where the mode lookup occurred on the
 | |
| 12-bit table rather than the 10-bit table.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Remove unused function parameter
 | |
| 
 | |
| The struct imx477 *ctrl parameter is not used in the function
 | |
| imx477_adjust_exposure_range(), so remove it.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Fix for long exposure limit calculations
 | |
| 
 | |
| Do not scale IMX477_EXPOSURE_OFFSET with the long exposure factor during
 | |
| the limit calculations. This allows larger exposure times, and does seem to be
 | |
| what the sensor is doing internally.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Extend driver to support imx378 sensor
 | |
| 
 | |
| The imx378 sensor is almost identical to the imx477 and can be
 | |
| supported as a "compatible" sensor with just a few extra register
 | |
| writes.
 | |
| 
 | |
| Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Fix framerates for 1332x990 mode
 | |
| 
 | |
| The imx477 driver's line length for this mode had not been updated to
 | |
| the value supplied to us by the sensor manufacturer. With this
 | |
| correction the sensor delivers the framerates that are expected.
 | |
| 
 | |
| Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Allow control of on-sensor DPC
 | |
| 
 | |
| A module parameter "dpc_enable" is added to allow the control of the
 | |
| sensor's on-board DPC (Defective Pixel Correction) function.
 | |
| 
 | |
| This is a global setting to be configured before using the sensor;
 | |
| there is no intention that this would ever be changed on-the-fly.
 | |
| 
 | |
| Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Sensor should report RAW color space
 | |
| 
 | |
| Tested on Raspberry Pi running libcamera.
 | |
| 
 | |
| Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Add vsync trigger_mode parameter
 | |
| 
 | |
| trigger_mode == 0 (default) => no effect / no registers written
 | |
| trigger_mode == 1           => source
 | |
| trigger_mode == 2           => sink
 | |
| 
 | |
| This can be set e.g. in /boot/cmdline.txt as imx477.trigger_mode=N
 | |
| 
 | |
| Signed-off-by: Jonas Jacob <jonas.jacob@neocortexvision.com>
 | |
| 
 | |
| media: i2c: Update imx477 Kconfig entry
 | |
| 
 | |
| Bring the IMX477 Kconfig declaration in line with upstream entries.
 | |
| 
 | |
| Signed-off-by: Phil Elwell <phil@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Correct minimum exposure lines
 | |
| 
 | |
| The minimum number of exposure lines value (IMX477_EXPOSURE_MIN) was
 | |
| previously 20 but this is not correct. The datasheet is not completely
 | |
| explicit, however the new value of 4 has been tested with all the
 | |
| sensor modes supported by this driver, and matches the lowest exposure
 | |
| value of 114us that could be achieved wtih Raspberry Pi's legacy
 | |
| firmware driver.
 | |
| 
 | |
| Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Allow dynamic horizontal blanking control
 | |
| 
 | |
| Currently, the V4L2_CID_HBLANK control is marked as read-only. Remove this
 | |
| restriction and allow userland to modify the control if needed.
 | |
| 
 | |
| Set the maximum limit of the line length to 0xfff0.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Reset hblank on mode switch
 | |
| 
 | |
| Reset the hblank control to the minimum value on every mode switch. This is to
 | |
| account for userland instances that do not yet control hblank, otherwise it
 | |
| gets set to a non-optimal value.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| 
 | |
| media: i2c: imx477: Do not unconditionally adjust hblank and vblank limits
 | |
| 
 | |
| On a mode change, only call imx477_set_framing_limits() to adjust the hblank
 | |
| and vblank limits if the new mode is different from the existing mode. This
 | |
| preserves any manual control values the user might have set.
 | |
| 
 | |
| Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
 | |
| ---
 | |
|  .../devicetree/bindings/media/i2c/imx477.yaml |  113 +
 | |
|  MAINTAINERS                                   |    8 +
 | |
|  drivers/media/i2c/Kconfig                     |   11 +
 | |
|  drivers/media/i2c/Makefile                    |    1 +
 | |
|  drivers/media/i2c/imx477.c                    | 2308 +++++++++++++++++
 | |
|  5 files changed, 2441 insertions(+)
 | |
|  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx477.yaml
 | |
|  create mode 100644 drivers/media/i2c/imx477.c
 | |
| 
 | |
| --- /dev/null
 | |
| +++ b/Documentation/devicetree/bindings/media/i2c/imx477.yaml
 | |
| @@ -0,0 +1,113 @@
 | |
| +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 | |
| +%YAML 1.2
 | |
| +---
 | |
| +$id: http://devicetree.org/schemas/media/i2c/imx477.yaml#
 | |
| +$schema: http://devicetree.org/meta-schemas/core.yaml#
 | |
| +
 | |
| +title: Sony 1/2.3-Inch 12Mpixel CMOS Digital Image Sensor
 | |
| +
 | |
| +maintainers:
 | |
| +  - Naushir Patuck <naush@raspberypi.com>
 | |
| +
 | |
| +description: |-
 | |
| +  The Sony IMX477 is a 1/2.3-inch CMOS active pixel digital image sensor
 | |
| +  with an active array size of 4056H x 3040V. It is programmable through
 | |
| +  I2C interface. The I2C address is fixed to 0x1A as per sensor data sheet.
 | |
| +  Image data is sent through MIPI CSI-2, which is configured as either 2 or
 | |
| +  4 data lanes.
 | |
| +
 | |
| +properties:
 | |
| +  compatible:
 | |
| +    const: sony,imx477
 | |
| +
 | |
| +  reg:
 | |
| +    description: I2C device address
 | |
| +    maxItems: 1
 | |
| +
 | |
| +  clocks:
 | |
| +    maxItems: 1
 | |
| +
 | |
| +  VDIG-supply:
 | |
| +    description:
 | |
| +      Digital I/O voltage supply, 1.05 volts
 | |
| +
 | |
| +  VANA-supply:
 | |
| +    description:
 | |
| +      Analog voltage supply, 2.8 volts
 | |
| +
 | |
| +  VDDL-supply:
 | |
| +    description:
 | |
| +      Digital core voltage supply, 1.8 volts
 | |
| +
 | |
| +  reset-gpios:
 | |
| +    description: |-
 | |
| +      Reference to the GPIO connected to the xclr pin, if any.
 | |
| +      Must be released (set high) after all all supplies and INCK are applied.
 | |
| +
 | |
| +  # See ../video-interfaces.txt for more details
 | |
| +  port:
 | |
| +    type: object
 | |
| +    properties:
 | |
| +      endpoint:
 | |
| +        type: object
 | |
| +        properties:
 | |
| +          data-lanes:
 | |
| +            description: |-
 | |
| +              The sensor supports either two-lane, or four-lane operation.
 | |
| +              For two-lane operation the property must be set to <1 2>.
 | |
| +            items:
 | |
| +              - const: 1
 | |
| +              - const: 2
 | |
| +
 | |
| +          clock-noncontinuous:
 | |
| +            type: boolean
 | |
| +            description: |-
 | |
| +              MIPI CSI-2 clock is non-continuous if this property is present,
 | |
| +              otherwise it's continuous.
 | |
| +
 | |
| +          link-frequencies:
 | |
| +            allOf:
 | |
| +              - $ref: /schemas/types.yaml#/definitions/uint64-array
 | |
| +            description:
 | |
| +              Allowed data bus frequencies.
 | |
| +
 | |
| +        required:
 | |
| +          - link-frequencies
 | |
| +
 | |
| +required:
 | |
| +  - compatible
 | |
| +  - reg
 | |
| +  - clocks
 | |
| +  - VANA-supply
 | |
| +  - VDIG-supply
 | |
| +  - VDDL-supply
 | |
| +  - port
 | |
| +
 | |
| +additionalProperties: false
 | |
| +
 | |
| +examples:
 | |
| +  - |
 | |
| +    i2c0 {
 | |
| +        #address-cells = <1>;
 | |
| +        #size-cells = <0>;
 | |
| +
 | |
| +        imx477: sensor@10 {
 | |
| +            compatible = "sony,imx477";
 | |
| +            reg = <0x1a>;
 | |
| +            clocks = <&imx477_clk>;
 | |
| +            VANA-supply = <&imx477_vana>;   /* 2.8v */
 | |
| +            VDIG-supply = <&imx477_vdig>;   /* 1.05v */
 | |
| +            VDDL-supply = <&imx477_vddl>;   /* 1.8v */
 | |
| +
 | |
| +            port {
 | |
| +                imx477_0: endpoint {
 | |
| +                    remote-endpoint = <&csi1_ep>;
 | |
| +                    data-lanes = <1 2>;
 | |
| +                    clock-noncontinuous;
 | |
| +                    link-frequencies = /bits/ 64 <450000000>;
 | |
| +                };
 | |
| +            };
 | |
| +        };
 | |
| +    };
 | |
| +
 | |
| +...
 | |
| --- a/MAINTAINERS
 | |
| +++ b/MAINTAINERS
 | |
| @@ -19288,6 +19288,14 @@ T:	git git://linuxtv.org/media_tree.git
 | |
|  F:	Documentation/devicetree/bindings/media/i2c/sony,imx412.yaml
 | |
|  F:	drivers/media/i2c/imx412.c
 | |
|  
 | |
| +SONY IMX477 SENSOR DRIVER
 | |
| +M:	Raspberry Pi Kernel Maintenance <kernel-list@raspberrypi.com>
 | |
| +L:	linux-media@vger.kernel.org
 | |
| +S:	Maintained
 | |
| +T:	git git://linuxtv.org/media_tree.git
 | |
| +F:	Documentation/devicetree/bindings/media/i2c/imx477.yaml
 | |
| +F:	drivers/media/i2c/imx477.c
 | |
| +
 | |
|  SONY MEMORYSTICK SUBSYSTEM
 | |
|  M:	Maxim Levitsky <maximlevitsky@gmail.com>
 | |
|  M:	Alex Dubov <oakad@yahoo.com>
 | |
| --- a/drivers/media/i2c/Kconfig
 | |
| +++ b/drivers/media/i2c/Kconfig
 | |
| @@ -1042,6 +1042,17 @@ config VIDEO_UDA1342
 | |
|  	  To compile this driver as a module, choose M here: the
 | |
|  	  module will be called uda1342.
 | |
|  
 | |
| +config VIDEO_IMX477
 | |
| +	tristate "Sony IMX477 sensor support"
 | |
| +	depends on I2C && VIDEO_DEV
 | |
| +	select VIDEO_V4L2_SUBDEV_API
 | |
| +	help
 | |
| +	  This is a Video4Linux2 sensor driver for the Sony
 | |
| +	  IMX477 camera. Also supports the Sony IMX378.
 | |
| +
 | |
| +	  To compile this driver as a module, choose M here: the
 | |
| +	  module will be called imx477.
 | |
| +
 | |
|  config VIDEO_VP27SMPX
 | |
|  	tristate "Panasonic VP27's internal MPX"
 | |
|  	depends on VIDEO_DEV && I2C
 | |
| --- a/drivers/media/i2c/Makefile
 | |
| +++ b/drivers/media/i2c/Makefile
 | |
| @@ -49,6 +49,7 @@ obj-$(CONFIG_VIDEO_IMX334) += imx334.o
 | |
|  obj-$(CONFIG_VIDEO_IMX335) += imx335.o
 | |
|  obj-$(CONFIG_VIDEO_IMX355) += imx355.o
 | |
|  obj-$(CONFIG_VIDEO_IMX412) += imx412.o
 | |
| +obj-$(CONFIG_VIDEO_IMX477) += imx477.o
 | |
|  obj-$(CONFIG_VIDEO_IR_I2C) += ir-kbd-i2c.o
 | |
|  obj-$(CONFIG_VIDEO_ISL7998X) += isl7998x.o
 | |
|  obj-$(CONFIG_VIDEO_KS0127) += ks0127.o
 | |
| --- /dev/null
 | |
| +++ b/drivers/media/i2c/imx477.c
 | |
| @@ -0,0 +1,2308 @@
 | |
| +// SPDX-License-Identifier: GPL-2.0
 | |
| +/*
 | |
| + * A V4L2 driver for Sony IMX477 cameras.
 | |
| + * Copyright (C) 2020, Raspberry Pi (Trading) Ltd
 | |
| + *
 | |
| + * Based on Sony imx219 camera driver
 | |
| + * Copyright (C) 2019-2020 Raspberry Pi (Trading) Ltd
 | |
| + */
 | |
| +#include <asm/unaligned.h>
 | |
| +#include <linux/clk.h>
 | |
| +#include <linux/delay.h>
 | |
| +#include <linux/gpio/consumer.h>
 | |
| +#include <linux/i2c.h>
 | |
| +#include <linux/module.h>
 | |
| +#include <linux/of_device.h>
 | |
| +#include <linux/pm_runtime.h>
 | |
| +#include <linux/regulator/consumer.h>
 | |
| +#include <media/v4l2-ctrls.h>
 | |
| +#include <media/v4l2-device.h>
 | |
| +#include <media/v4l2-event.h>
 | |
| +#include <media/v4l2-fwnode.h>
 | |
| +#include <media/v4l2-mediabus.h>
 | |
| +
 | |
| +static int dpc_enable = 1;
 | |
| +module_param(dpc_enable, int, 0644);
 | |
| +MODULE_PARM_DESC(dpc_enable, "Enable on-sensor DPC");
 | |
| +
 | |
| +static int trigger_mode;
 | |
| +module_param(trigger_mode, int, 0644);
 | |
| +MODULE_PARM_DESC(trigger_mode, "Set vsync trigger mode: 1=source, 2=sink");
 | |
| +
 | |
| +#define IMX477_REG_VALUE_08BIT		1
 | |
| +#define IMX477_REG_VALUE_16BIT		2
 | |
| +
 | |
| +/* Chip ID */
 | |
| +#define IMX477_REG_CHIP_ID		0x0016
 | |
| +#define IMX477_CHIP_ID			0x0477
 | |
| +#define IMX378_CHIP_ID			0x0378
 | |
| +
 | |
| +#define IMX477_REG_MODE_SELECT		0x0100
 | |
| +#define IMX477_MODE_STANDBY		0x00
 | |
| +#define IMX477_MODE_STREAMING		0x01
 | |
| +
 | |
| +#define IMX477_REG_ORIENTATION		0x101
 | |
| +
 | |
| +#define IMX477_XCLK_FREQ		24000000
 | |
| +
 | |
| +#define IMX477_DEFAULT_LINK_FREQ	450000000
 | |
| +
 | |
| +/* Pixel rate is fixed at 840MHz for all the modes */
 | |
| +#define IMX477_PIXEL_RATE		840000000
 | |
| +
 | |
| +/* V_TIMING internal */
 | |
| +#define IMX477_REG_FRAME_LENGTH		0x0340
 | |
| +#define IMX477_FRAME_LENGTH_MAX		0xffdc
 | |
| +
 | |
| +/* H_TIMING internal */
 | |
| +#define IMX477_REG_LINE_LENGTH		0x0342
 | |
| +#define IMX477_LINE_LENGTH_MAX		0xfff0
 | |
| +
 | |
| +/* Long exposure multiplier */
 | |
| +#define IMX477_LONG_EXP_SHIFT_MAX	7
 | |
| +#define IMX477_LONG_EXP_SHIFT_REG	0x3100
 | |
| +
 | |
| +/* Exposure control */
 | |
| +#define IMX477_REG_EXPOSURE		0x0202
 | |
| +#define IMX477_EXPOSURE_OFFSET		22
 | |
| +#define IMX477_EXPOSURE_MIN		4
 | |
| +#define IMX477_EXPOSURE_STEP		1
 | |
| +#define IMX477_EXPOSURE_DEFAULT		0x640
 | |
| +#define IMX477_EXPOSURE_MAX		(IMX477_FRAME_LENGTH_MAX - \
 | |
| +					 IMX477_EXPOSURE_OFFSET)
 | |
| +
 | |
| +/* Analog gain control */
 | |
| +#define IMX477_REG_ANALOG_GAIN		0x0204
 | |
| +#define IMX477_ANA_GAIN_MIN		0
 | |
| +#define IMX477_ANA_GAIN_MAX		978
 | |
| +#define IMX477_ANA_GAIN_STEP		1
 | |
| +#define IMX477_ANA_GAIN_DEFAULT		0x0
 | |
| +
 | |
| +/* Digital gain control */
 | |
| +#define IMX477_REG_DIGITAL_GAIN		0x020e
 | |
| +#define IMX477_DGTL_GAIN_MIN		0x0100
 | |
| +#define IMX477_DGTL_GAIN_MAX		0xffff
 | |
| +#define IMX477_DGTL_GAIN_DEFAULT	0x0100
 | |
| +#define IMX477_DGTL_GAIN_STEP		1
 | |
| +
 | |
| +/* Test Pattern Control */
 | |
| +#define IMX477_REG_TEST_PATTERN		0x0600
 | |
| +#define IMX477_TEST_PATTERN_DISABLE	0
 | |
| +#define IMX477_TEST_PATTERN_SOLID_COLOR	1
 | |
| +#define IMX477_TEST_PATTERN_COLOR_BARS	2
 | |
| +#define IMX477_TEST_PATTERN_GREY_COLOR	3
 | |
| +#define IMX477_TEST_PATTERN_PN9		4
 | |
| +
 | |
| +/* Test pattern colour components */
 | |
| +#define IMX477_REG_TEST_PATTERN_R	0x0602
 | |
| +#define IMX477_REG_TEST_PATTERN_GR	0x0604
 | |
| +#define IMX477_REG_TEST_PATTERN_B	0x0606
 | |
| +#define IMX477_REG_TEST_PATTERN_GB	0x0608
 | |
| +#define IMX477_TEST_PATTERN_COLOUR_MIN	0
 | |
| +#define IMX477_TEST_PATTERN_COLOUR_MAX	0x0fff
 | |
| +#define IMX477_TEST_PATTERN_COLOUR_STEP	1
 | |
| +#define IMX477_TEST_PATTERN_R_DEFAULT	IMX477_TEST_PATTERN_COLOUR_MAX
 | |
| +#define IMX477_TEST_PATTERN_GR_DEFAULT	0
 | |
| +#define IMX477_TEST_PATTERN_B_DEFAULT	0
 | |
| +#define IMX477_TEST_PATTERN_GB_DEFAULT	0
 | |
| +
 | |
| +/* Trigger mode */
 | |
| +#define IMX477_REG_MC_MODE		0x3f0b
 | |
| +#define IMX477_REG_MS_SEL		0x3041
 | |
| +#define IMX477_REG_XVS_IO_CTRL		0x3040
 | |
| +#define IMX477_REG_EXTOUT_EN		0x4b81
 | |
| +
 | |
| +/* Embedded metadata stream structure */
 | |
| +#define IMX477_EMBEDDED_LINE_WIDTH 16384
 | |
| +#define IMX477_NUM_EMBEDDED_LINES 1
 | |
| +
 | |
| +enum pad_types {
 | |
| +	IMAGE_PAD,
 | |
| +	METADATA_PAD,
 | |
| +	NUM_PADS
 | |
| +};
 | |
| +
 | |
| +/* IMX477 native and active pixel array size. */
 | |
| +#define IMX477_NATIVE_WIDTH		4072U
 | |
| +#define IMX477_NATIVE_HEIGHT		3176U
 | |
| +#define IMX477_PIXEL_ARRAY_LEFT		8U
 | |
| +#define IMX477_PIXEL_ARRAY_TOP		16U
 | |
| +#define IMX477_PIXEL_ARRAY_WIDTH	4056U
 | |
| +#define IMX477_PIXEL_ARRAY_HEIGHT	3040U
 | |
| +
 | |
| +struct imx477_reg {
 | |
| +	u16 address;
 | |
| +	u8 val;
 | |
| +};
 | |
| +
 | |
| +struct imx477_reg_list {
 | |
| +	unsigned int num_of_regs;
 | |
| +	const struct imx477_reg *regs;
 | |
| +};
 | |
| +
 | |
| +/* Mode : resolution and related config&values */
 | |
| +struct imx477_mode {
 | |
| +	/* Frame width */
 | |
| +	unsigned int width;
 | |
| +
 | |
| +	/* Frame height */
 | |
| +	unsigned int height;
 | |
| +
 | |
| +	/* H-timing in pixels */
 | |
| +	unsigned int line_length_pix;
 | |
| +
 | |
| +	/* Analog crop rectangle. */
 | |
| +	struct v4l2_rect crop;
 | |
| +
 | |
| +	/* Highest possible framerate. */
 | |
| +	struct v4l2_fract timeperframe_min;
 | |
| +
 | |
| +	/* Default framerate. */
 | |
| +	struct v4l2_fract timeperframe_default;
 | |
| +
 | |
| +	/* Default register values */
 | |
| +	struct imx477_reg_list reg_list;
 | |
| +};
 | |
| +
 | |
| +static const struct imx477_reg mode_common_regs[] = {
 | |
| +	{0x0136, 0x18},
 | |
| +	{0x0137, 0x00},
 | |
| +	{0xe000, 0x00},
 | |
| +	{0xe07a, 0x01},
 | |
| +	{0x0808, 0x02},
 | |
| +	{0x4ae9, 0x18},
 | |
| +	{0x4aea, 0x08},
 | |
| +	{0xf61c, 0x04},
 | |
| +	{0xf61e, 0x04},
 | |
| +	{0x4ae9, 0x21},
 | |
| +	{0x4aea, 0x80},
 | |
| +	{0x38a8, 0x1f},
 | |
| +	{0x38a9, 0xff},
 | |
| +	{0x38aa, 0x1f},
 | |
| +	{0x38ab, 0xff},
 | |
| +	{0x55d4, 0x00},
 | |
| +	{0x55d5, 0x00},
 | |
| +	{0x55d6, 0x07},
 | |
| +	{0x55d7, 0xff},
 | |
| +	{0x55e8, 0x07},
 | |
| +	{0x55e9, 0xff},
 | |
| +	{0x55ea, 0x00},
 | |
| +	{0x55eb, 0x00},
 | |
| +	{0x574c, 0x07},
 | |
| +	{0x574d, 0xff},
 | |
| +	{0x574e, 0x00},
 | |
| +	{0x574f, 0x00},
 | |
| +	{0x5754, 0x00},
 | |
| +	{0x5755, 0x00},
 | |
| +	{0x5756, 0x07},
 | |
| +	{0x5757, 0xff},
 | |
| +	{0x5973, 0x04},
 | |
| +	{0x5974, 0x01},
 | |
| +	{0x5d13, 0xc3},
 | |
| +	{0x5d14, 0x58},
 | |
| +	{0x5d15, 0xa3},
 | |
| +	{0x5d16, 0x1d},
 | |
| +	{0x5d17, 0x65},
 | |
| +	{0x5d18, 0x8c},
 | |
| +	{0x5d1a, 0x06},
 | |
| +	{0x5d1b, 0xa9},
 | |
| +	{0x5d1c, 0x45},
 | |
| +	{0x5d1d, 0x3a},
 | |
| +	{0x5d1e, 0xab},
 | |
| +	{0x5d1f, 0x15},
 | |
| +	{0x5d21, 0x0e},
 | |
| +	{0x5d22, 0x52},
 | |
| +	{0x5d23, 0xaa},
 | |
| +	{0x5d24, 0x7d},
 | |
| +	{0x5d25, 0x57},
 | |
| +	{0x5d26, 0xa8},
 | |
| +	{0x5d37, 0x5a},
 | |
| +	{0x5d38, 0x5a},
 | |
| +	{0x5d77, 0x7f},
 | |
| +	{0x7b75, 0x0e},
 | |
| +	{0x7b76, 0x0b},
 | |
| +	{0x7b77, 0x08},
 | |
| +	{0x7b78, 0x0a},
 | |
| +	{0x7b79, 0x47},
 | |
| +	{0x7b7c, 0x00},
 | |
| +	{0x7b7d, 0x00},
 | |
| +	{0x8d1f, 0x00},
 | |
| +	{0x8d27, 0x00},
 | |
| +	{0x9004, 0x03},
 | |
| +	{0x9200, 0x50},
 | |
| +	{0x9201, 0x6c},
 | |
| +	{0x9202, 0x71},
 | |
| +	{0x9203, 0x00},
 | |
| +	{0x9204, 0x71},
 | |
| +	{0x9205, 0x01},
 | |
| +	{0x9371, 0x6a},
 | |
| +	{0x9373, 0x6a},
 | |
| +	{0x9375, 0x64},
 | |
| +	{0x991a, 0x00},
 | |
| +	{0x996b, 0x8c},
 | |
| +	{0x996c, 0x64},
 | |
| +	{0x996d, 0x50},
 | |
| +	{0x9a4c, 0x0d},
 | |
| +	{0x9a4d, 0x0d},
 | |
| +	{0xa001, 0x0a},
 | |
| +	{0xa003, 0x0a},
 | |
| +	{0xa005, 0x0a},
 | |
| +	{0xa006, 0x01},
 | |
| +	{0xa007, 0xc0},
 | |
| +	{0xa009, 0xc0},
 | |
| +	{0x3d8a, 0x01},
 | |
| +	{0x4421, 0x04},
 | |
| +	{0x7b3b, 0x01},
 | |
| +	{0x7b4c, 0x00},
 | |
| +	{0x9905, 0x00},
 | |
| +	{0x9907, 0x00},
 | |
| +	{0x9909, 0x00},
 | |
| +	{0x990b, 0x00},
 | |
| +	{0x9944, 0x3c},
 | |
| +	{0x9947, 0x3c},
 | |
| +	{0x994a, 0x8c},
 | |
| +	{0x994b, 0x50},
 | |
| +	{0x994c, 0x1b},
 | |
| +	{0x994d, 0x8c},
 | |
| +	{0x994e, 0x50},
 | |
| +	{0x994f, 0x1b},
 | |
| +	{0x9950, 0x8c},
 | |
| +	{0x9951, 0x1b},
 | |
| +	{0x9952, 0x0a},
 | |
| +	{0x9953, 0x8c},
 | |
| +	{0x9954, 0x1b},
 | |
| +	{0x9955, 0x0a},
 | |
| +	{0x9a13, 0x04},
 | |
| +	{0x9a14, 0x04},
 | |
| +	{0x9a19, 0x00},
 | |
| +	{0x9a1c, 0x04},
 | |
| +	{0x9a1d, 0x04},
 | |
| +	{0x9a26, 0x05},
 | |
| +	{0x9a27, 0x05},
 | |
| +	{0x9a2c, 0x01},
 | |
| +	{0x9a2d, 0x03},
 | |
| +	{0x9a2f, 0x05},
 | |
| +	{0x9a30, 0x05},
 | |
| +	{0x9a41, 0x00},
 | |
| +	{0x9a46, 0x00},
 | |
| +	{0x9a47, 0x00},
 | |
| +	{0x9c17, 0x35},
 | |
| +	{0x9c1d, 0x31},
 | |
| +	{0x9c29, 0x50},
 | |
| +	{0x9c3b, 0x2f},
 | |
| +	{0x9c41, 0x6b},
 | |
| +	{0x9c47, 0x2d},
 | |
| +	{0x9c4d, 0x40},
 | |
| +	{0x9c6b, 0x00},
 | |
| +	{0x9c71, 0xc8},
 | |
| +	{0x9c73, 0x32},
 | |
| +	{0x9c75, 0x04},
 | |
| +	{0x9c7d, 0x2d},
 | |
| +	{0x9c83, 0x40},
 | |
| +	{0x9c94, 0x3f},
 | |
| +	{0x9c95, 0x3f},
 | |
| +	{0x9c96, 0x3f},
 | |
| +	{0x9c97, 0x00},
 | |
| +	{0x9c98, 0x00},
 | |
| +	{0x9c99, 0x00},
 | |
| +	{0x9c9a, 0x3f},
 | |
| +	{0x9c9b, 0x3f},
 | |
| +	{0x9c9c, 0x3f},
 | |
| +	{0x9ca0, 0x0f},
 | |
| +	{0x9ca1, 0x0f},
 | |
| +	{0x9ca2, 0x0f},
 | |
| +	{0x9ca3, 0x00},
 | |
| +	{0x9ca4, 0x00},
 | |
| +	{0x9ca5, 0x00},
 | |
| +	{0x9ca6, 0x1e},
 | |
| +	{0x9ca7, 0x1e},
 | |
| +	{0x9ca8, 0x1e},
 | |
| +	{0x9ca9, 0x00},
 | |
| +	{0x9caa, 0x00},
 | |
| +	{0x9cab, 0x00},
 | |
| +	{0x9cac, 0x09},
 | |
| +	{0x9cad, 0x09},
 | |
| +	{0x9cae, 0x09},
 | |
| +	{0x9cbd, 0x50},
 | |
| +	{0x9cbf, 0x50},
 | |
| +	{0x9cc1, 0x50},
 | |
| +	{0x9cc3, 0x40},
 | |
| +	{0x9cc5, 0x40},
 | |
| +	{0x9cc7, 0x40},
 | |
| +	{0x9cc9, 0x0a},
 | |
| +	{0x9ccb, 0x0a},
 | |
| +	{0x9ccd, 0x0a},
 | |
| +	{0x9d17, 0x35},
 | |
| +	{0x9d1d, 0x31},
 | |
| +	{0x9d29, 0x50},
 | |
| +	{0x9d3b, 0x2f},
 | |
| +	{0x9d41, 0x6b},
 | |
| +	{0x9d47, 0x42},
 | |
| +	{0x9d4d, 0x5a},
 | |
| +	{0x9d6b, 0x00},
 | |
| +	{0x9d71, 0xc8},
 | |
| +	{0x9d73, 0x32},
 | |
| +	{0x9d75, 0x04},
 | |
| +	{0x9d7d, 0x42},
 | |
| +	{0x9d83, 0x5a},
 | |
| +	{0x9d94, 0x3f},
 | |
| +	{0x9d95, 0x3f},
 | |
| +	{0x9d96, 0x3f},
 | |
| +	{0x9d97, 0x00},
 | |
| +	{0x9d98, 0x00},
 | |
| +	{0x9d99, 0x00},
 | |
| +	{0x9d9a, 0x3f},
 | |
| +	{0x9d9b, 0x3f},
 | |
| +	{0x9d9c, 0x3f},
 | |
| +	{0x9d9d, 0x1f},
 | |
| +	{0x9d9e, 0x1f},
 | |
| +	{0x9d9f, 0x1f},
 | |
| +	{0x9da0, 0x0f},
 | |
| +	{0x9da1, 0x0f},
 | |
| +	{0x9da2, 0x0f},
 | |
| +	{0x9da3, 0x00},
 | |
| +	{0x9da4, 0x00},
 | |
| +	{0x9da5, 0x00},
 | |
| +	{0x9da6, 0x1e},
 | |
| +	{0x9da7, 0x1e},
 | |
| +	{0x9da8, 0x1e},
 | |
| +	{0x9da9, 0x00},
 | |
| +	{0x9daa, 0x00},
 | |
| +	{0x9dab, 0x00},
 | |
| +	{0x9dac, 0x09},
 | |
| +	{0x9dad, 0x09},
 | |
| +	{0x9dae, 0x09},
 | |
| +	{0x9dc9, 0x0a},
 | |
| +	{0x9dcb, 0x0a},
 | |
| +	{0x9dcd, 0x0a},
 | |
| +	{0x9e17, 0x35},
 | |
| +	{0x9e1d, 0x31},
 | |
| +	{0x9e29, 0x50},
 | |
| +	{0x9e3b, 0x2f},
 | |
| +	{0x9e41, 0x6b},
 | |
| +	{0x9e47, 0x2d},
 | |
| +	{0x9e4d, 0x40},
 | |
| +	{0x9e6b, 0x00},
 | |
| +	{0x9e71, 0xc8},
 | |
| +	{0x9e73, 0x32},
 | |
| +	{0x9e75, 0x04},
 | |
| +	{0x9e94, 0x0f},
 | |
| +	{0x9e95, 0x0f},
 | |
| +	{0x9e96, 0x0f},
 | |
| +	{0x9e97, 0x00},
 | |
| +	{0x9e98, 0x00},
 | |
| +	{0x9e99, 0x00},
 | |
| +	{0x9ea0, 0x0f},
 | |
| +	{0x9ea1, 0x0f},
 | |
| +	{0x9ea2, 0x0f},
 | |
| +	{0x9ea3, 0x00},
 | |
| +	{0x9ea4, 0x00},
 | |
| +	{0x9ea5, 0x00},
 | |
| +	{0x9ea6, 0x3f},
 | |
| +	{0x9ea7, 0x3f},
 | |
| +	{0x9ea8, 0x3f},
 | |
| +	{0x9ea9, 0x00},
 | |
| +	{0x9eaa, 0x00},
 | |
| +	{0x9eab, 0x00},
 | |
| +	{0x9eac, 0x09},
 | |
| +	{0x9ead, 0x09},
 | |
| +	{0x9eae, 0x09},
 | |
| +	{0x9ec9, 0x0a},
 | |
| +	{0x9ecb, 0x0a},
 | |
| +	{0x9ecd, 0x0a},
 | |
| +	{0x9f17, 0x35},
 | |
| +	{0x9f1d, 0x31},
 | |
| +	{0x9f29, 0x50},
 | |
| +	{0x9f3b, 0x2f},
 | |
| +	{0x9f41, 0x6b},
 | |
| +	{0x9f47, 0x42},
 | |
| +	{0x9f4d, 0x5a},
 | |
| +	{0x9f6b, 0x00},
 | |
| +	{0x9f71, 0xc8},
 | |
| +	{0x9f73, 0x32},
 | |
| +	{0x9f75, 0x04},
 | |
| +	{0x9f94, 0x0f},
 | |
| +	{0x9f95, 0x0f},
 | |
| +	{0x9f96, 0x0f},
 | |
| +	{0x9f97, 0x00},
 | |
| +	{0x9f98, 0x00},
 | |
| +	{0x9f99, 0x00},
 | |
| +	{0x9f9a, 0x2f},
 | |
| +	{0x9f9b, 0x2f},
 | |
| +	{0x9f9c, 0x2f},
 | |
| +	{0x9f9d, 0x00},
 | |
| +	{0x9f9e, 0x00},
 | |
| +	{0x9f9f, 0x00},
 | |
| +	{0x9fa0, 0x0f},
 | |
| +	{0x9fa1, 0x0f},
 | |
| +	{0x9fa2, 0x0f},
 | |
| +	{0x9fa3, 0x00},
 | |
| +	{0x9fa4, 0x00},
 | |
| +	{0x9fa5, 0x00},
 | |
| +	{0x9fa6, 0x1e},
 | |
| +	{0x9fa7, 0x1e},
 | |
| +	{0x9fa8, 0x1e},
 | |
| +	{0x9fa9, 0x00},
 | |
| +	{0x9faa, 0x00},
 | |
| +	{0x9fab, 0x00},
 | |
| +	{0x9fac, 0x09},
 | |
| +	{0x9fad, 0x09},
 | |
| +	{0x9fae, 0x09},
 | |
| +	{0x9fc9, 0x0a},
 | |
| +	{0x9fcb, 0x0a},
 | |
| +	{0x9fcd, 0x0a},
 | |
| +	{0xa14b, 0xff},
 | |
| +	{0xa151, 0x0c},
 | |
| +	{0xa153, 0x50},
 | |
| +	{0xa155, 0x02},
 | |
| +	{0xa157, 0x00},
 | |
| +	{0xa1ad, 0xff},
 | |
| +	{0xa1b3, 0x0c},
 | |
| +	{0xa1b5, 0x50},
 | |
| +	{0xa1b9, 0x00},
 | |
| +	{0xa24b, 0xff},
 | |
| +	{0xa257, 0x00},
 | |
| +	{0xa2ad, 0xff},
 | |
| +	{0xa2b9, 0x00},
 | |
| +	{0xb21f, 0x04},
 | |
| +	{0xb35c, 0x00},
 | |
| +	{0xb35e, 0x08},
 | |
| +	{0x0112, 0x0c},
 | |
| +	{0x0113, 0x0c},
 | |
| +	{0x0114, 0x01},
 | |
| +	{0x0350, 0x00},
 | |
| +	{0xbcf1, 0x02},
 | |
| +	{0x3ff9, 0x01},
 | |
| +};
 | |
| +
 | |
| +/* 12 mpix 10fps */
 | |
| +static const struct imx477_reg mode_4056x3040_regs[] = {
 | |
| +	{0x0342, 0x5d},
 | |
| +	{0x0343, 0xc0},
 | |
| +	{0x0344, 0x00},
 | |
| +	{0x0345, 0x00},
 | |
| +	{0x0346, 0x00},
 | |
| +	{0x0347, 0x00},
 | |
| +	{0x0348, 0x0f},
 | |
| +	{0x0349, 0xd7},
 | |
| +	{0x034a, 0x0b},
 | |
| +	{0x034b, 0xdf},
 | |
| +	{0x00e3, 0x00},
 | |
| +	{0x00e4, 0x00},
 | |
| +	{0x00fc, 0x0a},
 | |
| +	{0x00fd, 0x0a},
 | |
| +	{0x00fe, 0x0a},
 | |
| +	{0x00ff, 0x0a},
 | |
| +	{0x0220, 0x00},
 | |
| +	{0x0221, 0x11},
 | |
| +	{0x0381, 0x01},
 | |
| +	{0x0383, 0x01},
 | |
| +	{0x0385, 0x01},
 | |
| +	{0x0387, 0x01},
 | |
| +	{0x0900, 0x00},
 | |
| +	{0x0901, 0x11},
 | |
| +	{0x0902, 0x02},
 | |
| +	{0x3140, 0x02},
 | |
| +	{0x3c00, 0x00},
 | |
| +	{0x3c01, 0x03},
 | |
| +	{0x3c02, 0xa2},
 | |
| +	{0x3f0d, 0x01},
 | |
| +	{0x5748, 0x07},
 | |
| +	{0x5749, 0xff},
 | |
| +	{0x574a, 0x00},
 | |
| +	{0x574b, 0x00},
 | |
| +	{0x7b75, 0x0a},
 | |
| +	{0x7b76, 0x0c},
 | |
| +	{0x7b77, 0x07},
 | |
| +	{0x7b78, 0x06},
 | |
| +	{0x7b79, 0x3c},
 | |
| +	{0x7b53, 0x01},
 | |
| +	{0x9369, 0x5a},
 | |
| +	{0x936b, 0x55},
 | |
| +	{0x936d, 0x28},
 | |
| +	{0x9304, 0x00},
 | |
| +	{0x9305, 0x00},
 | |
| +	{0x9e9a, 0x2f},
 | |
| +	{0x9e9b, 0x2f},
 | |
| +	{0x9e9c, 0x2f},
 | |
| +	{0x9e9d, 0x00},
 | |
| +	{0x9e9e, 0x00},
 | |
| +	{0x9e9f, 0x00},
 | |
| +	{0xa2a9, 0x60},
 | |
| +	{0xa2b7, 0x00},
 | |
| +	{0x0401, 0x00},
 | |
| +	{0x0404, 0x00},
 | |
| +	{0x0405, 0x10},
 | |
| +	{0x0408, 0x00},
 | |
| +	{0x0409, 0x00},
 | |
| +	{0x040a, 0x00},
 | |
| +	{0x040b, 0x00},
 | |
| +	{0x040c, 0x0f},
 | |
| +	{0x040d, 0xd8},
 | |
| +	{0x040e, 0x0b},
 | |
| +	{0x040f, 0xe0},
 | |
| +	{0x034c, 0x0f},
 | |
| +	{0x034d, 0xd8},
 | |
| +	{0x034e, 0x0b},
 | |
| +	{0x034f, 0xe0},
 | |
| +	{0x0301, 0x05},
 | |
| +	{0x0303, 0x02},
 | |
| +	{0x0305, 0x04},
 | |
| +	{0x0306, 0x01},
 | |
| +	{0x0307, 0x5e},
 | |
| +	{0x0309, 0x0c},
 | |
| +	{0x030b, 0x02},
 | |
| +	{0x030d, 0x02},
 | |
| +	{0x030e, 0x00},
 | |
| +	{0x030f, 0x96},
 | |
| +	{0x0310, 0x01},
 | |
| +	{0x0820, 0x07},
 | |
| +	{0x0821, 0x08},
 | |
| +	{0x0822, 0x00},
 | |
| +	{0x0823, 0x00},
 | |
| +	{0x080a, 0x00},
 | |
| +	{0x080b, 0x7f},
 | |
| +	{0x080c, 0x00},
 | |
| +	{0x080d, 0x4f},
 | |
| +	{0x080e, 0x00},
 | |
| +	{0x080f, 0x77},
 | |
| +	{0x0810, 0x00},
 | |
| +	{0x0811, 0x5f},
 | |
| +	{0x0812, 0x00},
 | |
| +	{0x0813, 0x57},
 | |
| +	{0x0814, 0x00},
 | |
| +	{0x0815, 0x4f},
 | |
| +	{0x0816, 0x01},
 | |
| +	{0x0817, 0x27},
 | |
| +	{0x0818, 0x00},
 | |
| +	{0x0819, 0x3f},
 | |
| +	{0xe04c, 0x00},
 | |
| +	{0xe04d, 0x7f},
 | |
| +	{0xe04e, 0x00},
 | |
| +	{0xe04f, 0x1f},
 | |
| +	{0x3e20, 0x01},
 | |
| +	{0x3e37, 0x00},
 | |
| +	{0x3f50, 0x00},
 | |
| +	{0x3f56, 0x02},
 | |
| +	{0x3f57, 0xae},
 | |
| +};
 | |
| +
 | |
| +/* 2x2 binned. 40fps */
 | |
| +static const struct imx477_reg mode_2028x1520_regs[] = {
 | |
| +	{0x0342, 0x31},
 | |
| +	{0x0343, 0xc4},
 | |
| +	{0x0344, 0x00},
 | |
| +	{0x0345, 0x00},
 | |
| +	{0x0346, 0x00},
 | |
| +	{0x0347, 0x00},
 | |
| +	{0x0348, 0x0f},
 | |
| +	{0x0349, 0xd7},
 | |
| +	{0x034a, 0x0b},
 | |
| +	{0x034b, 0xdf},
 | |
| +	{0x0220, 0x00},
 | |
| +	{0x0221, 0x11},
 | |
| +	{0x0381, 0x01},
 | |
| +	{0x0383, 0x01},
 | |
| +	{0x0385, 0x01},
 | |
| +	{0x0387, 0x01},
 | |
| +	{0x0900, 0x01},
 | |
| +	{0x0901, 0x12},
 | |
| +	{0x0902, 0x02},
 | |
| +	{0x3140, 0x02},
 | |
| +	{0x3c00, 0x00},
 | |
| +	{0x3c01, 0x03},
 | |
| +	{0x3c02, 0xa2},
 | |
| +	{0x3f0d, 0x01},
 | |
| +	{0x5748, 0x07},
 | |
| +	{0x5749, 0xff},
 | |
| +	{0x574a, 0x00},
 | |
| +	{0x574b, 0x00},
 | |
| +	{0x7b53, 0x01},
 | |
| +	{0x9369, 0x73},
 | |
| +	{0x936b, 0x64},
 | |
| +	{0x936d, 0x5f},
 | |
| +	{0x9304, 0x00},
 | |
| +	{0x9305, 0x00},
 | |
| +	{0x9e9a, 0x2f},
 | |
| +	{0x9e9b, 0x2f},
 | |
| +	{0x9e9c, 0x2f},
 | |
| +	{0x9e9d, 0x00},
 | |
| +	{0x9e9e, 0x00},
 | |
| +	{0x9e9f, 0x00},
 | |
| +	{0xa2a9, 0x60},
 | |
| +	{0xa2b7, 0x00},
 | |
| +	{0x0401, 0x01},
 | |
| +	{0x0404, 0x00},
 | |
| +	{0x0405, 0x20},
 | |
| +	{0x0408, 0x00},
 | |
| +	{0x0409, 0x00},
 | |
| +	{0x040a, 0x00},
 | |
| +	{0x040b, 0x00},
 | |
| +	{0x040c, 0x0f},
 | |
| +	{0x040d, 0xd8},
 | |
| +	{0x040e, 0x0b},
 | |
| +	{0x040f, 0xe0},
 | |
| +	{0x034c, 0x07},
 | |
| +	{0x034d, 0xec},
 | |
| +	{0x034e, 0x05},
 | |
| +	{0x034f, 0xf0},
 | |
| +	{0x0301, 0x05},
 | |
| +	{0x0303, 0x02},
 | |
| +	{0x0305, 0x04},
 | |
| +	{0x0306, 0x01},
 | |
| +	{0x0307, 0x5e},
 | |
| +	{0x0309, 0x0c},
 | |
| +	{0x030b, 0x02},
 | |
| +	{0x030d, 0x02},
 | |
| +	{0x030e, 0x00},
 | |
| +	{0x030f, 0x96},
 | |
| +	{0x0310, 0x01},
 | |
| +	{0x0820, 0x07},
 | |
| +	{0x0821, 0x08},
 | |
| +	{0x0822, 0x00},
 | |
| +	{0x0823, 0x00},
 | |
| +	{0x080a, 0x00},
 | |
| +	{0x080b, 0x7f},
 | |
| +	{0x080c, 0x00},
 | |
| +	{0x080d, 0x4f},
 | |
| +	{0x080e, 0x00},
 | |
| +	{0x080f, 0x77},
 | |
| +	{0x0810, 0x00},
 | |
| +	{0x0811, 0x5f},
 | |
| +	{0x0812, 0x00},
 | |
| +	{0x0813, 0x57},
 | |
| +	{0x0814, 0x00},
 | |
| +	{0x0815, 0x4f},
 | |
| +	{0x0816, 0x01},
 | |
| +	{0x0817, 0x27},
 | |
| +	{0x0818, 0x00},
 | |
| +	{0x0819, 0x3f},
 | |
| +	{0xe04c, 0x00},
 | |
| +	{0xe04d, 0x7f},
 | |
| +	{0xe04e, 0x00},
 | |
| +	{0xe04f, 0x1f},
 | |
| +	{0x3e20, 0x01},
 | |
| +	{0x3e37, 0x00},
 | |
| +	{0x3f50, 0x00},
 | |
| +	{0x3f56, 0x01},
 | |
| +	{0x3f57, 0x6c},
 | |
| +};
 | |
| +
 | |
| +/* 1080p cropped mode */
 | |
| +static const struct imx477_reg mode_2028x1080_regs[] = {
 | |
| +	{0x0342, 0x31},
 | |
| +	{0x0343, 0xc4},
 | |
| +	{0x0344, 0x00},
 | |
| +	{0x0345, 0x00},
 | |
| +	{0x0346, 0x01},
 | |
| +	{0x0347, 0xb8},
 | |
| +	{0x0348, 0x0f},
 | |
| +	{0x0349, 0xd7},
 | |
| +	{0x034a, 0x0a},
 | |
| +	{0x034b, 0x27},
 | |
| +	{0x0220, 0x00},
 | |
| +	{0x0221, 0x11},
 | |
| +	{0x0381, 0x01},
 | |
| +	{0x0383, 0x01},
 | |
| +	{0x0385, 0x01},
 | |
| +	{0x0387, 0x01},
 | |
| +	{0x0900, 0x01},
 | |
| +	{0x0901, 0x12},
 | |
| +	{0x0902, 0x02},
 | |
| +	{0x3140, 0x02},
 | |
| +	{0x3c00, 0x00},
 | |
| +	{0x3c01, 0x03},
 | |
| +	{0x3c02, 0xa2},
 | |
| +	{0x3f0d, 0x01},
 | |
| +	{0x5748, 0x07},
 | |
| +	{0x5749, 0xff},
 | |
| +	{0x574a, 0x00},
 | |
| +	{0x574b, 0x00},
 | |
| +	{0x7b53, 0x01},
 | |
| +	{0x9369, 0x73},
 | |
| +	{0x936b, 0x64},
 | |
| +	{0x936d, 0x5f},
 | |
| +	{0x9304, 0x00},
 | |
| +	{0x9305, 0x00},
 | |
| +	{0x9e9a, 0x2f},
 | |
| +	{0x9e9b, 0x2f},
 | |
| +	{0x9e9c, 0x2f},
 | |
| +	{0x9e9d, 0x00},
 | |
| +	{0x9e9e, 0x00},
 | |
| +	{0x9e9f, 0x00},
 | |
| +	{0xa2a9, 0x60},
 | |
| +	{0xa2b7, 0x00},
 | |
| +	{0x0401, 0x01},
 | |
| +	{0x0404, 0x00},
 | |
| +	{0x0405, 0x20},
 | |
| +	{0x0408, 0x00},
 | |
| +	{0x0409, 0x00},
 | |
| +	{0x040a, 0x00},
 | |
| +	{0x040b, 0x00},
 | |
| +	{0x040c, 0x0f},
 | |
| +	{0x040d, 0xd8},
 | |
| +	{0x040e, 0x04},
 | |
| +	{0x040f, 0x38},
 | |
| +	{0x034c, 0x07},
 | |
| +	{0x034d, 0xec},
 | |
| +	{0x034e, 0x04},
 | |
| +	{0x034f, 0x38},
 | |
| +	{0x0301, 0x05},
 | |
| +	{0x0303, 0x02},
 | |
| +	{0x0305, 0x04},
 | |
| +	{0x0306, 0x01},
 | |
| +	{0x0307, 0x5e},
 | |
| +	{0x0309, 0x0c},
 | |
| +	{0x030b, 0x02},
 | |
| +	{0x030d, 0x02},
 | |
| +	{0x030e, 0x00},
 | |
| +	{0x030f, 0x96},
 | |
| +	{0x0310, 0x01},
 | |
| +	{0x0820, 0x07},
 | |
| +	{0x0821, 0x08},
 | |
| +	{0x0822, 0x00},
 | |
| +	{0x0823, 0x00},
 | |
| +	{0x080a, 0x00},
 | |
| +	{0x080b, 0x7f},
 | |
| +	{0x080c, 0x00},
 | |
| +	{0x080d, 0x4f},
 | |
| +	{0x080e, 0x00},
 | |
| +	{0x080f, 0x77},
 | |
| +	{0x0810, 0x00},
 | |
| +	{0x0811, 0x5f},
 | |
| +	{0x0812, 0x00},
 | |
| +	{0x0813, 0x57},
 | |
| +	{0x0814, 0x00},
 | |
| +	{0x0815, 0x4f},
 | |
| +	{0x0816, 0x01},
 | |
| +	{0x0817, 0x27},
 | |
| +	{0x0818, 0x00},
 | |
| +	{0x0819, 0x3f},
 | |
| +	{0xe04c, 0x00},
 | |
| +	{0xe04d, 0x7f},
 | |
| +	{0xe04e, 0x00},
 | |
| +	{0xe04f, 0x1f},
 | |
| +	{0x3e20, 0x01},
 | |
| +	{0x3e37, 0x00},
 | |
| +	{0x3f50, 0x00},
 | |
| +	{0x3f56, 0x01},
 | |
| +	{0x3f57, 0x6c},
 | |
| +};
 | |
| +
 | |
| +/* 4x4 binned. 120fps */
 | |
| +static const struct imx477_reg mode_1332x990_regs[] = {
 | |
| +	{0x420b, 0x01},
 | |
| +	{0x990c, 0x00},
 | |
| +	{0x990d, 0x08},
 | |
| +	{0x9956, 0x8c},
 | |
| +	{0x9957, 0x64},
 | |
| +	{0x9958, 0x50},
 | |
| +	{0x9a48, 0x06},
 | |
| +	{0x9a49, 0x06},
 | |
| +	{0x9a4a, 0x06},
 | |
| +	{0x9a4b, 0x06},
 | |
| +	{0x9a4c, 0x06},
 | |
| +	{0x9a4d, 0x06},
 | |
| +	{0x0112, 0x0a},
 | |
| +	{0x0113, 0x0a},
 | |
| +	{0x0114, 0x01},
 | |
| +	{0x0342, 0x1a},
 | |
| +	{0x0343, 0x08},
 | |
| +	{0x0340, 0x04},
 | |
| +	{0x0341, 0x1a},
 | |
| +	{0x0344, 0x00},
 | |
| +	{0x0345, 0x00},
 | |
| +	{0x0346, 0x02},
 | |
| +	{0x0347, 0x10},
 | |
| +	{0x0348, 0x0f},
 | |
| +	{0x0349, 0xd7},
 | |
| +	{0x034a, 0x09},
 | |
| +	{0x034b, 0xcf},
 | |
| +	{0x00e3, 0x00},
 | |
| +	{0x00e4, 0x00},
 | |
| +	{0x00fc, 0x0a},
 | |
| +	{0x00fd, 0x0a},
 | |
| +	{0x00fe, 0x0a},
 | |
| +	{0x00ff, 0x0a},
 | |
| +	{0xe013, 0x00},
 | |
| +	{0x0220, 0x00},
 | |
| +	{0x0221, 0x11},
 | |
| +	{0x0381, 0x01},
 | |
| +	{0x0383, 0x01},
 | |
| +	{0x0385, 0x01},
 | |
| +	{0x0387, 0x01},
 | |
| +	{0x0900, 0x01},
 | |
| +	{0x0901, 0x22},
 | |
| +	{0x0902, 0x02},
 | |
| +	{0x3140, 0x02},
 | |
| +	{0x3c00, 0x00},
 | |
| +	{0x3c01, 0x01},
 | |
| +	{0x3c02, 0x9c},
 | |
| +	{0x3f0d, 0x00},
 | |
| +	{0x5748, 0x00},
 | |
| +	{0x5749, 0x00},
 | |
| +	{0x574a, 0x00},
 | |
| +	{0x574b, 0xa4},
 | |
| +	{0x7b75, 0x0e},
 | |
| +	{0x7b76, 0x09},
 | |
| +	{0x7b77, 0x08},
 | |
| +	{0x7b78, 0x06},
 | |
| +	{0x7b79, 0x34},
 | |
| +	{0x7b53, 0x00},
 | |
| +	{0x9369, 0x73},
 | |
| +	{0x936b, 0x64},
 | |
| +	{0x936d, 0x5f},
 | |
| +	{0x9304, 0x03},
 | |
| +	{0x9305, 0x80},
 | |
| +	{0x9e9a, 0x2f},
 | |
| +	{0x9e9b, 0x2f},
 | |
| +	{0x9e9c, 0x2f},
 | |
| +	{0x9e9d, 0x00},
 | |
| +	{0x9e9e, 0x00},
 | |
| +	{0x9e9f, 0x00},
 | |
| +	{0xa2a9, 0x27},
 | |
| +	{0xa2b7, 0x03},
 | |
| +	{0x0401, 0x00},
 | |
| +	{0x0404, 0x00},
 | |
| +	{0x0405, 0x10},
 | |
| +	{0x0408, 0x01},
 | |
| +	{0x0409, 0x5c},
 | |
| +	{0x040a, 0x00},
 | |
| +	{0x040b, 0x00},
 | |
| +	{0x040c, 0x05},
 | |
| +	{0x040d, 0x34},
 | |
| +	{0x040e, 0x03},
 | |
| +	{0x040f, 0xde},
 | |
| +	{0x034c, 0x05},
 | |
| +	{0x034d, 0x34},
 | |
| +	{0x034e, 0x03},
 | |
| +	{0x034f, 0xde},
 | |
| +	{0x0301, 0x05},
 | |
| +	{0x0303, 0x02},
 | |
| +	{0x0305, 0x02},
 | |
| +	{0x0306, 0x00},
 | |
| +	{0x0307, 0xaf},
 | |
| +	{0x0309, 0x0a},
 | |
| +	{0x030b, 0x02},
 | |
| +	{0x030d, 0x02},
 | |
| +	{0x030e, 0x00},
 | |
| +	{0x030f, 0x96},
 | |
| +	{0x0310, 0x01},
 | |
| +	{0x0820, 0x07},
 | |
| +	{0x0821, 0x08},
 | |
| +	{0x0822, 0x00},
 | |
| +	{0x0823, 0x00},
 | |
| +	{0x080a, 0x00},
 | |
| +	{0x080b, 0x7f},
 | |
| +	{0x080c, 0x00},
 | |
| +	{0x080d, 0x4f},
 | |
| +	{0x080e, 0x00},
 | |
| +	{0x080f, 0x77},
 | |
| +	{0x0810, 0x00},
 | |
| +	{0x0811, 0x5f},
 | |
| +	{0x0812, 0x00},
 | |
| +	{0x0813, 0x57},
 | |
| +	{0x0814, 0x00},
 | |
| +	{0x0815, 0x4f},
 | |
| +	{0x0816, 0x01},
 | |
| +	{0x0817, 0x27},
 | |
| +	{0x0818, 0x00},
 | |
| +	{0x0819, 0x3f},
 | |
| +	{0xe04c, 0x00},
 | |
| +	{0xe04d, 0x5f},
 | |
| +	{0xe04e, 0x00},
 | |
| +	{0xe04f, 0x1f},
 | |
| +	{0x3e20, 0x01},
 | |
| +	{0x3e37, 0x00},
 | |
| +	{0x3f50, 0x00},
 | |
| +	{0x3f56, 0x00},
 | |
| +	{0x3f57, 0xbf},
 | |
| +};
 | |
| +
 | |
| +/* Mode configs */
 | |
| +static const struct imx477_mode supported_modes_12bit[] = {
 | |
| +	{
 | |
| +		/* 12MPix 10fps mode */
 | |
| +		.width = 4056,
 | |
| +		.height = 3040,
 | |
| +		.line_length_pix = 0x5dc0,
 | |
| +		.crop = {
 | |
| +			.left = IMX477_PIXEL_ARRAY_LEFT,
 | |
| +			.top = IMX477_PIXEL_ARRAY_TOP,
 | |
| +			.width = 4056,
 | |
| +			.height = 3040,
 | |
| +		},
 | |
| +		.timeperframe_min = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 1000
 | |
| +		},
 | |
| +		.timeperframe_default = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 1000
 | |
| +		},
 | |
| +		.reg_list = {
 | |
| +			.num_of_regs = ARRAY_SIZE(mode_4056x3040_regs),
 | |
| +			.regs = mode_4056x3040_regs,
 | |
| +		},
 | |
| +	},
 | |
| +	{
 | |
| +		/* 2x2 binned 40fps mode */
 | |
| +		.width = 2028,
 | |
| +		.height = 1520,
 | |
| +		.line_length_pix = 0x31c4,
 | |
| +		.crop = {
 | |
| +			.left = IMX477_PIXEL_ARRAY_LEFT,
 | |
| +			.top = IMX477_PIXEL_ARRAY_TOP,
 | |
| +			.width = 4056,
 | |
| +			.height = 3040,
 | |
| +		},
 | |
| +		.timeperframe_min = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 4000
 | |
| +		},
 | |
| +		.timeperframe_default = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 3000
 | |
| +		},
 | |
| +		.reg_list = {
 | |
| +			.num_of_regs = ARRAY_SIZE(mode_2028x1520_regs),
 | |
| +			.regs = mode_2028x1520_regs,
 | |
| +		},
 | |
| +	},
 | |
| +	{
 | |
| +		/* 1080p 50fps cropped mode */
 | |
| +		.width = 2028,
 | |
| +		.height = 1080,
 | |
| +		.line_length_pix = 0x31c4,
 | |
| +		.crop = {
 | |
| +			.left = IMX477_PIXEL_ARRAY_LEFT,
 | |
| +			.top = IMX477_PIXEL_ARRAY_TOP + 440,
 | |
| +			.width = 4056,
 | |
| +			.height = 2160,
 | |
| +		},
 | |
| +		.timeperframe_min = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 5000
 | |
| +		},
 | |
| +		.timeperframe_default = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 3000
 | |
| +		},
 | |
| +		.reg_list = {
 | |
| +			.num_of_regs = ARRAY_SIZE(mode_2028x1080_regs),
 | |
| +			.regs = mode_2028x1080_regs,
 | |
| +		},
 | |
| +	}
 | |
| +};
 | |
| +
 | |
| +static const struct imx477_mode supported_modes_10bit[] = {
 | |
| +	{
 | |
| +		/* 120fps. 2x2 binned and cropped */
 | |
| +		.width = 1332,
 | |
| +		.height = 990,
 | |
| +		.line_length_pix = 6664,
 | |
| +		.crop = {
 | |
| +			/*
 | |
| +			 * FIXME: the analog crop rectangle is actually
 | |
| +			 * programmed with a horizontal displacement of 0
 | |
| +			 * pixels, not 4. It gets shrunk after going through
 | |
| +			 * the scaler. Move this information to the compose
 | |
| +			 * rectangle once the driver is expanded to represent
 | |
| +			 * its processing blocks with multiple subdevs.
 | |
| +			 */
 | |
| +			.left = IMX477_PIXEL_ARRAY_LEFT + 696,
 | |
| +			.top = IMX477_PIXEL_ARRAY_TOP + 528,
 | |
| +			.width = 2664,
 | |
| +			.height = 1980,
 | |
| +		},
 | |
| +		.timeperframe_min = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 12000
 | |
| +		},
 | |
| +		.timeperframe_default = {
 | |
| +			.numerator = 100,
 | |
| +			.denominator = 12000
 | |
| +		},
 | |
| +		.reg_list = {
 | |
| +			.num_of_regs = ARRAY_SIZE(mode_1332x990_regs),
 | |
| +			.regs = mode_1332x990_regs,
 | |
| +		}
 | |
| +	}
 | |
| +};
 | |
| +
 | |
| +/*
 | |
| + * The supported formats.
 | |
| + * This table MUST contain 4 entries per format, to cover the various flip
 | |
| + * combinations in the order
 | |
| + * - no flip
 | |
| + * - h flip
 | |
| + * - v flip
 | |
| + * - h&v flips
 | |
| + */
 | |
| +static const u32 codes[] = {
 | |
| +	/* 12-bit modes. */
 | |
| +	MEDIA_BUS_FMT_SRGGB12_1X12,
 | |
| +	MEDIA_BUS_FMT_SGRBG12_1X12,
 | |
| +	MEDIA_BUS_FMT_SGBRG12_1X12,
 | |
| +	MEDIA_BUS_FMT_SBGGR12_1X12,
 | |
| +	/* 10-bit modes. */
 | |
| +	MEDIA_BUS_FMT_SRGGB10_1X10,
 | |
| +	MEDIA_BUS_FMT_SGRBG10_1X10,
 | |
| +	MEDIA_BUS_FMT_SGBRG10_1X10,
 | |
| +	MEDIA_BUS_FMT_SBGGR10_1X10,
 | |
| +};
 | |
| +
 | |
| +static const char * const imx477_test_pattern_menu[] = {
 | |
| +	"Disabled",
 | |
| +	"Color Bars",
 | |
| +	"Solid Color",
 | |
| +	"Grey Color Bars",
 | |
| +	"PN9"
 | |
| +};
 | |
| +
 | |
| +static const int imx477_test_pattern_val[] = {
 | |
| +	IMX477_TEST_PATTERN_DISABLE,
 | |
| +	IMX477_TEST_PATTERN_COLOR_BARS,
 | |
| +	IMX477_TEST_PATTERN_SOLID_COLOR,
 | |
| +	IMX477_TEST_PATTERN_GREY_COLOR,
 | |
| +	IMX477_TEST_PATTERN_PN9,
 | |
| +};
 | |
| +
 | |
| +/* regulator supplies */
 | |
| +static const char * const imx477_supply_name[] = {
 | |
| +	/* Supplies can be enabled in any order */
 | |
| +	"VANA",  /* Analog (2.8V) supply */
 | |
| +	"VDIG",  /* Digital Core (1.05V) supply */
 | |
| +	"VDDL",  /* IF (1.8V) supply */
 | |
| +};
 | |
| +
 | |
| +#define IMX477_NUM_SUPPLIES ARRAY_SIZE(imx477_supply_name)
 | |
| +
 | |
| +/*
 | |
| + * Initialisation delay between XCLR low->high and the moment when the sensor
 | |
| + * can start capture (i.e. can leave software standby), given by T7 in the
 | |
| + * datasheet is 8ms.  This does include I2C setup time as well.
 | |
| + *
 | |
| + * Note, that delay between XCLR low->high and reading the CCI ID register (T6
 | |
| + * in the datasheet) is much smaller - 600us.
 | |
| + */
 | |
| +#define IMX477_XCLR_MIN_DELAY_US	8000
 | |
| +#define IMX477_XCLR_DELAY_RANGE_US	1000
 | |
| +
 | |
| +struct imx477_compatible_data {
 | |
| +	unsigned int chip_id;
 | |
| +	struct imx477_reg_list extra_regs;
 | |
| +};
 | |
| +
 | |
| +struct imx477 {
 | |
| +	struct v4l2_subdev sd;
 | |
| +	struct media_pad pad[NUM_PADS];
 | |
| +
 | |
| +	unsigned int fmt_code;
 | |
| +
 | |
| +	struct clk *xclk;
 | |
| +	u32 xclk_freq;
 | |
| +
 | |
| +	struct gpio_desc *reset_gpio;
 | |
| +	struct regulator_bulk_data supplies[IMX477_NUM_SUPPLIES];
 | |
| +
 | |
| +	struct v4l2_ctrl_handler ctrl_handler;
 | |
| +	/* V4L2 Controls */
 | |
| +	struct v4l2_ctrl *pixel_rate;
 | |
| +	struct v4l2_ctrl *exposure;
 | |
| +	struct v4l2_ctrl *vflip;
 | |
| +	struct v4l2_ctrl *hflip;
 | |
| +	struct v4l2_ctrl *vblank;
 | |
| +	struct v4l2_ctrl *hblank;
 | |
| +
 | |
| +	/* Current mode */
 | |
| +	const struct imx477_mode *mode;
 | |
| +
 | |
| +	/*
 | |
| +	 * Mutex for serialized access:
 | |
| +	 * Protect sensor module set pad format and start/stop streaming safely.
 | |
| +	 */
 | |
| +	struct mutex mutex;
 | |
| +
 | |
| +	/* Streaming on/off */
 | |
| +	bool streaming;
 | |
| +
 | |
| +	/* Rewrite common registers on stream on? */
 | |
| +	bool common_regs_written;
 | |
| +
 | |
| +	/* Current long exposure factor in use. Set through V4L2_CID_VBLANK */
 | |
| +	unsigned int long_exp_shift;
 | |
| +
 | |
| +	/* Any extra information related to different compatible sensors */
 | |
| +	const struct imx477_compatible_data *compatible_data;
 | |
| +};
 | |
| +
 | |
| +static inline struct imx477 *to_imx477(struct v4l2_subdev *_sd)
 | |
| +{
 | |
| +	return container_of(_sd, struct imx477, sd);
 | |
| +}
 | |
| +
 | |
| +static inline void get_mode_table(unsigned int code,
 | |
| +				  const struct imx477_mode **mode_list,
 | |
| +				  unsigned int *num_modes)
 | |
| +{
 | |
| +	switch (code) {
 | |
| +	/* 12-bit */
 | |
| +	case MEDIA_BUS_FMT_SRGGB12_1X12:
 | |
| +	case MEDIA_BUS_FMT_SGRBG12_1X12:
 | |
| +	case MEDIA_BUS_FMT_SGBRG12_1X12:
 | |
| +	case MEDIA_BUS_FMT_SBGGR12_1X12:
 | |
| +		*mode_list = supported_modes_12bit;
 | |
| +		*num_modes = ARRAY_SIZE(supported_modes_12bit);
 | |
| +		break;
 | |
| +	/* 10-bit */
 | |
| +	case MEDIA_BUS_FMT_SRGGB10_1X10:
 | |
| +	case MEDIA_BUS_FMT_SGRBG10_1X10:
 | |
| +	case MEDIA_BUS_FMT_SGBRG10_1X10:
 | |
| +	case MEDIA_BUS_FMT_SBGGR10_1X10:
 | |
| +		*mode_list = supported_modes_10bit;
 | |
| +		*num_modes = ARRAY_SIZE(supported_modes_10bit);
 | |
| +		break;
 | |
| +	default:
 | |
| +		*mode_list = NULL;
 | |
| +		*num_modes = 0;
 | |
| +	}
 | |
| +}
 | |
| +
 | |
| +/* Read registers up to 2 at a time */
 | |
| +static int imx477_read_reg(struct imx477 *imx477, u16 reg, u32 len, u32 *val)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	struct i2c_msg msgs[2];
 | |
| +	u8 addr_buf[2] = { reg >> 8, reg & 0xff };
 | |
| +	u8 data_buf[4] = { 0, };
 | |
| +	int ret;
 | |
| +
 | |
| +	if (len > 4)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	/* Write register address */
 | |
| +	msgs[0].addr = client->addr;
 | |
| +	msgs[0].flags = 0;
 | |
| +	msgs[0].len = ARRAY_SIZE(addr_buf);
 | |
| +	msgs[0].buf = addr_buf;
 | |
| +
 | |
| +	/* Read data from register */
 | |
| +	msgs[1].addr = client->addr;
 | |
| +	msgs[1].flags = I2C_M_RD;
 | |
| +	msgs[1].len = len;
 | |
| +	msgs[1].buf = &data_buf[4 - len];
 | |
| +
 | |
| +	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
 | |
| +	if (ret != ARRAY_SIZE(msgs))
 | |
| +		return -EIO;
 | |
| +
 | |
| +	*val = get_unaligned_be32(data_buf);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +/* Write registers up to 2 at a time */
 | |
| +static int imx477_write_reg(struct imx477 *imx477, u16 reg, u32 len, u32 val)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	u8 buf[6];
 | |
| +
 | |
| +	if (len > 4)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	put_unaligned_be16(reg, buf);
 | |
| +	put_unaligned_be32(val << (8 * (4 - len)), buf + 2);
 | |
| +	if (i2c_master_send(client, buf, len + 2) != len + 2)
 | |
| +		return -EIO;
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +/* Write a list of registers */
 | |
| +static int imx477_write_regs(struct imx477 *imx477,
 | |
| +			     const struct imx477_reg *regs, u32 len)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	unsigned int i;
 | |
| +	int ret;
 | |
| +
 | |
| +	for (i = 0; i < len; i++) {
 | |
| +		ret = imx477_write_reg(imx477, regs[i].address, 1, regs[i].val);
 | |
| +		if (ret) {
 | |
| +			dev_err_ratelimited(&client->dev,
 | |
| +					    "Failed to write reg 0x%4.4x. error = %d\n",
 | |
| +					    regs[i].address, ret);
 | |
| +
 | |
| +			return ret;
 | |
| +		}
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +/* Get bayer order based on flip setting. */
 | |
| +static u32 imx477_get_format_code(struct imx477 *imx477, u32 code)
 | |
| +{
 | |
| +	unsigned int i;
 | |
| +
 | |
| +	lockdep_assert_held(&imx477->mutex);
 | |
| +
 | |
| +	for (i = 0; i < ARRAY_SIZE(codes); i++)
 | |
| +		if (codes[i] == code)
 | |
| +			break;
 | |
| +
 | |
| +	if (i >= ARRAY_SIZE(codes))
 | |
| +		i = 0;
 | |
| +
 | |
| +	i = (i & ~3) | (imx477->vflip->val ? 2 : 0) |
 | |
| +	    (imx477->hflip->val ? 1 : 0);
 | |
| +
 | |
| +	return codes[i];
 | |
| +}
 | |
| +
 | |
| +static void imx477_set_default_format(struct imx477 *imx477)
 | |
| +{
 | |
| +	/* Set default mode to max resolution */
 | |
| +	imx477->mode = &supported_modes_12bit[0];
 | |
| +	imx477->fmt_code = MEDIA_BUS_FMT_SRGGB12_1X12;
 | |
| +}
 | |
| +
 | |
| +static int imx477_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
 | |
| +{
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +	struct v4l2_mbus_framefmt *try_fmt_img =
 | |
| +		v4l2_subdev_get_try_format(sd, fh->pad, IMAGE_PAD);
 | |
| +	struct v4l2_mbus_framefmt *try_fmt_meta =
 | |
| +		v4l2_subdev_get_try_format(sd, fh->pad, METADATA_PAD);
 | |
| +	struct v4l2_rect *try_crop;
 | |
| +
 | |
| +	mutex_lock(&imx477->mutex);
 | |
| +
 | |
| +	/* Initialize try_fmt for the image pad */
 | |
| +	try_fmt_img->width = supported_modes_12bit[0].width;
 | |
| +	try_fmt_img->height = supported_modes_12bit[0].height;
 | |
| +	try_fmt_img->code = imx477_get_format_code(imx477,
 | |
| +						   MEDIA_BUS_FMT_SRGGB12_1X12);
 | |
| +	try_fmt_img->field = V4L2_FIELD_NONE;
 | |
| +
 | |
| +	/* Initialize try_fmt for the embedded metadata pad */
 | |
| +	try_fmt_meta->width = IMX477_EMBEDDED_LINE_WIDTH;
 | |
| +	try_fmt_meta->height = IMX477_NUM_EMBEDDED_LINES;
 | |
| +	try_fmt_meta->code = MEDIA_BUS_FMT_SENSOR_DATA;
 | |
| +	try_fmt_meta->field = V4L2_FIELD_NONE;
 | |
| +
 | |
| +	/* Initialize try_crop */
 | |
| +	try_crop = v4l2_subdev_get_try_crop(sd, fh->pad, IMAGE_PAD);
 | |
| +	try_crop->left = IMX477_PIXEL_ARRAY_LEFT;
 | |
| +	try_crop->top = IMX477_PIXEL_ARRAY_TOP;
 | |
| +	try_crop->width = IMX477_PIXEL_ARRAY_WIDTH;
 | |
| +	try_crop->height = IMX477_PIXEL_ARRAY_HEIGHT;
 | |
| +
 | |
| +	mutex_unlock(&imx477->mutex);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static void imx477_adjust_exposure_range(struct imx477 *imx477)
 | |
| +{
 | |
| +	int exposure_max, exposure_def;
 | |
| +
 | |
| +	/* Honour the VBLANK limits when setting exposure. */
 | |
| +	exposure_max = imx477->mode->height + imx477->vblank->val -
 | |
| +		       IMX477_EXPOSURE_OFFSET;
 | |
| +	exposure_def = min(exposure_max, imx477->exposure->val);
 | |
| +	__v4l2_ctrl_modify_range(imx477->exposure, imx477->exposure->minimum,
 | |
| +				 exposure_max, imx477->exposure->step,
 | |
| +				 exposure_def);
 | |
| +}
 | |
| +
 | |
| +static int imx477_set_frame_length(struct imx477 *imx477, unsigned int val)
 | |
| +{
 | |
| +	int ret = 0;
 | |
| +
 | |
| +	imx477->long_exp_shift = 0;
 | |
| +
 | |
| +	while (val > IMX477_FRAME_LENGTH_MAX) {
 | |
| +		imx477->long_exp_shift++;
 | |
| +		val >>= 1;
 | |
| +	}
 | |
| +
 | |
| +	ret = imx477_write_reg(imx477, IMX477_REG_FRAME_LENGTH,
 | |
| +			       IMX477_REG_VALUE_16BIT, val);
 | |
| +	if (ret)
 | |
| +		return ret;
 | |
| +
 | |
| +	return imx477_write_reg(imx477, IMX477_LONG_EXP_SHIFT_REG,
 | |
| +				IMX477_REG_VALUE_08BIT, imx477->long_exp_shift);
 | |
| +}
 | |
| +
 | |
| +static int imx477_set_ctrl(struct v4l2_ctrl *ctrl)
 | |
| +{
 | |
| +	struct imx477 *imx477 =
 | |
| +		container_of(ctrl->handler, struct imx477, ctrl_handler);
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	int ret = 0;
 | |
| +
 | |
| +	/*
 | |
| +	 * The VBLANK control may change the limits of usable exposure, so check
 | |
| +	 * and adjust if necessary.
 | |
| +	 */
 | |
| +	if (ctrl->id == V4L2_CID_VBLANK)
 | |
| +		imx477_adjust_exposure_range(imx477);
 | |
| +
 | |
| +	/*
 | |
| +	 * Applying V4L2 control value only happens
 | |
| +	 * when power is up for streaming
 | |
| +	 */
 | |
| +	if (pm_runtime_get_if_in_use(&client->dev) == 0)
 | |
| +		return 0;
 | |
| +
 | |
| +	switch (ctrl->id) {
 | |
| +	case V4L2_CID_ANALOGUE_GAIN:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_ANALOG_GAIN,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_EXPOSURE:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_EXPOSURE,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val >>
 | |
| +							imx477->long_exp_shift);
 | |
| +		break;
 | |
| +	case V4L2_CID_DIGITAL_GAIN:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_DIGITAL_GAIN,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_TEST_PATTERN:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN,
 | |
| +				       IMX477_REG_VALUE_16BIT,
 | |
| +				       imx477_test_pattern_val[ctrl->val]);
 | |
| +		break;
 | |
| +	case V4L2_CID_TEST_PATTERN_RED:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_R,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_TEST_PATTERN_GREENR:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_GR,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_TEST_PATTERN_BLUE:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_B,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_TEST_PATTERN_GREENB:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_TEST_PATTERN_GB,
 | |
| +				       IMX477_REG_VALUE_16BIT, ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_HFLIP:
 | |
| +	case V4L2_CID_VFLIP:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_ORIENTATION, 1,
 | |
| +				       imx477->hflip->val |
 | |
| +				       imx477->vflip->val << 1);
 | |
| +		break;
 | |
| +	case V4L2_CID_VBLANK:
 | |
| +		ret = imx477_set_frame_length(imx477,
 | |
| +					      imx477->mode->height + ctrl->val);
 | |
| +		break;
 | |
| +	case V4L2_CID_HBLANK:
 | |
| +		ret = imx477_write_reg(imx477, IMX477_REG_LINE_LENGTH, 2,
 | |
| +				       imx477->mode->width + ctrl->val);
 | |
| +		break;
 | |
| +	default:
 | |
| +		dev_info(&client->dev,
 | |
| +			 "ctrl(id:0x%x,val:0x%x) is not handled\n",
 | |
| +			 ctrl->id, ctrl->val);
 | |
| +		ret = -EINVAL;
 | |
| +		break;
 | |
| +	}
 | |
| +
 | |
| +	pm_runtime_put(&client->dev);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static const struct v4l2_ctrl_ops imx477_ctrl_ops = {
 | |
| +	.s_ctrl = imx477_set_ctrl,
 | |
| +};
 | |
| +
 | |
| +static int imx477_enum_mbus_code(struct v4l2_subdev *sd,
 | |
| +				 struct v4l2_subdev_pad_config *cfg,
 | |
| +				 struct v4l2_subdev_mbus_code_enum *code)
 | |
| +{
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	if (code->pad >= NUM_PADS)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	if (code->pad == IMAGE_PAD) {
 | |
| +		if (code->index >= (ARRAY_SIZE(codes) / 4))
 | |
| +			return -EINVAL;
 | |
| +
 | |
| +		code->code = imx477_get_format_code(imx477,
 | |
| +						    codes[code->index * 4]);
 | |
| +	} else {
 | |
| +		if (code->index > 0)
 | |
| +			return -EINVAL;
 | |
| +
 | |
| +		code->code = MEDIA_BUS_FMT_SENSOR_DATA;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int imx477_enum_frame_size(struct v4l2_subdev *sd,
 | |
| +				  struct v4l2_subdev_pad_config *cfg,
 | |
| +				  struct v4l2_subdev_frame_size_enum *fse)
 | |
| +{
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	if (fse->pad >= NUM_PADS)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	if (fse->pad == IMAGE_PAD) {
 | |
| +		const struct imx477_mode *mode_list;
 | |
| +		unsigned int num_modes;
 | |
| +
 | |
| +		get_mode_table(fse->code, &mode_list, &num_modes);
 | |
| +
 | |
| +		if (fse->index >= num_modes)
 | |
| +			return -EINVAL;
 | |
| +
 | |
| +		if (fse->code != imx477_get_format_code(imx477, fse->code))
 | |
| +			return -EINVAL;
 | |
| +
 | |
| +		fse->min_width = mode_list[fse->index].width;
 | |
| +		fse->max_width = fse->min_width;
 | |
| +		fse->min_height = mode_list[fse->index].height;
 | |
| +		fse->max_height = fse->min_height;
 | |
| +	} else {
 | |
| +		if (fse->code != MEDIA_BUS_FMT_SENSOR_DATA || fse->index > 0)
 | |
| +			return -EINVAL;
 | |
| +
 | |
| +		fse->min_width = IMX477_EMBEDDED_LINE_WIDTH;
 | |
| +		fse->max_width = fse->min_width;
 | |
| +		fse->min_height = IMX477_NUM_EMBEDDED_LINES;
 | |
| +		fse->max_height = fse->min_height;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static void imx477_reset_colorspace(struct v4l2_mbus_framefmt *fmt)
 | |
| +{
 | |
| +	fmt->colorspace = V4L2_COLORSPACE_RAW;
 | |
| +	fmt->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(fmt->colorspace);
 | |
| +	fmt->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
 | |
| +							  fmt->colorspace,
 | |
| +							  fmt->ycbcr_enc);
 | |
| +	fmt->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(fmt->colorspace);
 | |
| +}
 | |
| +
 | |
| +static void imx477_update_image_pad_format(struct imx477 *imx477,
 | |
| +					   const struct imx477_mode *mode,
 | |
| +					   struct v4l2_subdev_format *fmt)
 | |
| +{
 | |
| +	fmt->format.width = mode->width;
 | |
| +	fmt->format.height = mode->height;
 | |
| +	fmt->format.field = V4L2_FIELD_NONE;
 | |
| +	imx477_reset_colorspace(&fmt->format);
 | |
| +}
 | |
| +
 | |
| +static void imx477_update_metadata_pad_format(struct v4l2_subdev_format *fmt)
 | |
| +{
 | |
| +	fmt->format.width = IMX477_EMBEDDED_LINE_WIDTH;
 | |
| +	fmt->format.height = IMX477_NUM_EMBEDDED_LINES;
 | |
| +	fmt->format.code = MEDIA_BUS_FMT_SENSOR_DATA;
 | |
| +	fmt->format.field = V4L2_FIELD_NONE;
 | |
| +}
 | |
| +
 | |
| +static int imx477_get_pad_format(struct v4l2_subdev *sd,
 | |
| +				 struct v4l2_subdev_pad_config *cfg,
 | |
| +				 struct v4l2_subdev_format *fmt)
 | |
| +{
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	if (fmt->pad >= NUM_PADS)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	mutex_lock(&imx477->mutex);
 | |
| +
 | |
| +	if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 | |
| +		struct v4l2_mbus_framefmt *try_fmt =
 | |
| +			v4l2_subdev_get_try_format(&imx477->sd, cfg, fmt->pad);
 | |
| +		/* update the code which could change due to vflip or hflip: */
 | |
| +		try_fmt->code = fmt->pad == IMAGE_PAD ?
 | |
| +				imx477_get_format_code(imx477, try_fmt->code) :
 | |
| +				MEDIA_BUS_FMT_SENSOR_DATA;
 | |
| +		fmt->format = *try_fmt;
 | |
| +	} else {
 | |
| +		if (fmt->pad == IMAGE_PAD) {
 | |
| +			imx477_update_image_pad_format(imx477, imx477->mode,
 | |
| +						       fmt);
 | |
| +			fmt->format.code =
 | |
| +			       imx477_get_format_code(imx477, imx477->fmt_code);
 | |
| +		} else {
 | |
| +			imx477_update_metadata_pad_format(fmt);
 | |
| +		}
 | |
| +	}
 | |
| +
 | |
| +	mutex_unlock(&imx477->mutex);
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static
 | |
| +unsigned int imx477_get_frame_length(const struct imx477_mode *mode,
 | |
| +				     const struct v4l2_fract *timeperframe)
 | |
| +{
 | |
| +	u64 frame_length;
 | |
| +
 | |
| +	frame_length = (u64)timeperframe->numerator * IMX477_PIXEL_RATE;
 | |
| +	do_div(frame_length,
 | |
| +	       (u64)timeperframe->denominator * mode->line_length_pix);
 | |
| +
 | |
| +	if (WARN_ON(frame_length > IMX477_FRAME_LENGTH_MAX))
 | |
| +		frame_length = IMX477_FRAME_LENGTH_MAX;
 | |
| +
 | |
| +	return max_t(unsigned int, frame_length, mode->height);
 | |
| +}
 | |
| +
 | |
| +static void imx477_set_framing_limits(struct imx477 *imx477)
 | |
| +{
 | |
| +	unsigned int frm_length_min, frm_length_default, hblank_min;
 | |
| +	const struct imx477_mode *mode = imx477->mode;
 | |
| +
 | |
| +	frm_length_min = imx477_get_frame_length(mode, &mode->timeperframe_min);
 | |
| +	frm_length_default =
 | |
| +		     imx477_get_frame_length(mode, &mode->timeperframe_default);
 | |
| +
 | |
| +	/* Default to no long exposure multiplier. */
 | |
| +	imx477->long_exp_shift = 0;
 | |
| +
 | |
| +	/* Update limits and set FPS to default */
 | |
| +	__v4l2_ctrl_modify_range(imx477->vblank, frm_length_min - mode->height,
 | |
| +				 ((1 << IMX477_LONG_EXP_SHIFT_MAX) *
 | |
| +					IMX477_FRAME_LENGTH_MAX) - mode->height,
 | |
| +				 1, frm_length_default - mode->height);
 | |
| +
 | |
| +	/* Setting this will adjust the exposure limits as well. */
 | |
| +	__v4l2_ctrl_s_ctrl(imx477->vblank, frm_length_default - mode->height);
 | |
| +
 | |
| +	hblank_min = mode->line_length_pix - mode->width;
 | |
| +	__v4l2_ctrl_modify_range(imx477->hblank, hblank_min,
 | |
| +				 IMX477_LINE_LENGTH_MAX, 1, hblank_min);
 | |
| +	__v4l2_ctrl_s_ctrl(imx477->hblank, hblank_min);
 | |
| +}
 | |
| +
 | |
| +static int imx477_set_pad_format(struct v4l2_subdev *sd,
 | |
| +				 struct v4l2_subdev_pad_config *cfg,
 | |
| +				 struct v4l2_subdev_format *fmt)
 | |
| +{
 | |
| +	struct v4l2_mbus_framefmt *framefmt;
 | |
| +	const struct imx477_mode *mode;
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	if (fmt->pad >= NUM_PADS)
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	mutex_lock(&imx477->mutex);
 | |
| +
 | |
| +	if (fmt->pad == IMAGE_PAD) {
 | |
| +		const struct imx477_mode *mode_list;
 | |
| +		unsigned int num_modes;
 | |
| +
 | |
| +		/* Bayer order varies with flips */
 | |
| +		fmt->format.code = imx477_get_format_code(imx477,
 | |
| +							  fmt->format.code);
 | |
| +
 | |
| +		get_mode_table(fmt->format.code, &mode_list, &num_modes);
 | |
| +
 | |
| +		mode = v4l2_find_nearest_size(mode_list,
 | |
| +					      num_modes,
 | |
| +					      width, height,
 | |
| +					      fmt->format.width,
 | |
| +					      fmt->format.height);
 | |
| +		imx477_update_image_pad_format(imx477, mode, fmt);
 | |
| +		if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 | |
| +			framefmt = v4l2_subdev_get_try_format(sd, cfg,
 | |
| +							      fmt->pad);
 | |
| +			*framefmt = fmt->format;
 | |
| +		} else if (imx477->mode != mode) {
 | |
| +			imx477->mode = mode;
 | |
| +			imx477->fmt_code = fmt->format.code;
 | |
| +			imx477_set_framing_limits(imx477);
 | |
| +		}
 | |
| +	} else {
 | |
| +		if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) {
 | |
| +			framefmt = v4l2_subdev_get_try_format(sd, cfg,
 | |
| +							      fmt->pad);
 | |
| +			*framefmt = fmt->format;
 | |
| +		} else {
 | |
| +			/* Only one embedded data mode is supported */
 | |
| +			imx477_update_metadata_pad_format(fmt);
 | |
| +		}
 | |
| +	}
 | |
| +
 | |
| +	mutex_unlock(&imx477->mutex);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static const struct v4l2_rect *
 | |
| +__imx477_get_pad_crop(struct imx477 *imx477, struct v4l2_subdev_pad_config *cfg,
 | |
| +		      unsigned int pad, enum v4l2_subdev_format_whence which)
 | |
| +{
 | |
| +	switch (which) {
 | |
| +	case V4L2_SUBDEV_FORMAT_TRY:
 | |
| +		return v4l2_subdev_get_try_crop(&imx477->sd, cfg, pad);
 | |
| +	case V4L2_SUBDEV_FORMAT_ACTIVE:
 | |
| +		return &imx477->mode->crop;
 | |
| +	}
 | |
| +
 | |
| +	return NULL;
 | |
| +}
 | |
| +
 | |
| +static int imx477_get_selection(struct v4l2_subdev *sd,
 | |
| +				struct v4l2_subdev_pad_config *cfg,
 | |
| +				struct v4l2_subdev_selection *sel)
 | |
| +{
 | |
| +	switch (sel->target) {
 | |
| +	case V4L2_SEL_TGT_CROP: {
 | |
| +		struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +		mutex_lock(&imx477->mutex);
 | |
| +		sel->r = *__imx477_get_pad_crop(imx477, cfg, sel->pad,
 | |
| +						sel->which);
 | |
| +		mutex_unlock(&imx477->mutex);
 | |
| +
 | |
| +		return 0;
 | |
| +	}
 | |
| +
 | |
| +	case V4L2_SEL_TGT_NATIVE_SIZE:
 | |
| +		sel->r.left = 0;
 | |
| +		sel->r.top = 0;
 | |
| +		sel->r.width = IMX477_NATIVE_WIDTH;
 | |
| +		sel->r.height = IMX477_NATIVE_HEIGHT;
 | |
| +
 | |
| +		return 0;
 | |
| +
 | |
| +	case V4L2_SEL_TGT_CROP_DEFAULT:
 | |
| +	case V4L2_SEL_TGT_CROP_BOUNDS:
 | |
| +		sel->r.left = IMX477_PIXEL_ARRAY_LEFT;
 | |
| +		sel->r.top = IMX477_PIXEL_ARRAY_TOP;
 | |
| +		sel->r.width = IMX477_PIXEL_ARRAY_WIDTH;
 | |
| +		sel->r.height = IMX477_PIXEL_ARRAY_HEIGHT;
 | |
| +
 | |
| +		return 0;
 | |
| +	}
 | |
| +
 | |
| +	return -EINVAL;
 | |
| +}
 | |
| +
 | |
| +/* Start streaming */
 | |
| +static int imx477_start_streaming(struct imx477 *imx477)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	const struct imx477_reg_list *reg_list;
 | |
| +	const struct imx477_reg_list *extra_regs;
 | |
| +	int ret;
 | |
| +
 | |
| +	if (!imx477->common_regs_written) {
 | |
| +		ret = imx477_write_regs(imx477, mode_common_regs,
 | |
| +					ARRAY_SIZE(mode_common_regs));
 | |
| +		if (!ret) {
 | |
| +			extra_regs = &imx477->compatible_data->extra_regs;
 | |
| +			ret = imx477_write_regs(imx477,	extra_regs->regs,
 | |
| +						extra_regs->num_of_regs);
 | |
| +		}
 | |
| +
 | |
| +		if (ret) {
 | |
| +			dev_err(&client->dev, "%s failed to set common settings\n",
 | |
| +				__func__);
 | |
| +			return ret;
 | |
| +		}
 | |
| +		imx477->common_regs_written = true;
 | |
| +	}
 | |
| +
 | |
| +	/* Apply default values of current mode */
 | |
| +	reg_list = &imx477->mode->reg_list;
 | |
| +	ret = imx477_write_regs(imx477, reg_list->regs, reg_list->num_of_regs);
 | |
| +	if (ret) {
 | |
| +		dev_err(&client->dev, "%s failed to set mode\n", __func__);
 | |
| +		return ret;
 | |
| +	}
 | |
| +
 | |
| +	/* Set on-sensor DPC. */
 | |
| +	imx477_write_reg(imx477, 0x0b05, IMX477_REG_VALUE_08BIT, !!dpc_enable);
 | |
| +	imx477_write_reg(imx477, 0x0b06, IMX477_REG_VALUE_08BIT, !!dpc_enable);
 | |
| +
 | |
| +	/* Set vsync trigger mode */
 | |
| +	if (trigger_mode != 0) {
 | |
| +		/* trigger_mode == 1 for source, 2 for sink */
 | |
| +		const u32 val = (trigger_mode == 1) ? 1 : 0;
 | |
| +
 | |
| +		imx477_write_reg(imx477, IMX477_REG_MC_MODE,
 | |
| +				 IMX477_REG_VALUE_08BIT, 1);
 | |
| +		imx477_write_reg(imx477, IMX477_REG_MS_SEL,
 | |
| +				 IMX477_REG_VALUE_08BIT, val);
 | |
| +		imx477_write_reg(imx477, IMX477_REG_XVS_IO_CTRL,
 | |
| +				 IMX477_REG_VALUE_08BIT, val);
 | |
| +		imx477_write_reg(imx477, IMX477_REG_EXTOUT_EN,
 | |
| +				 IMX477_REG_VALUE_08BIT, val);
 | |
| +	}
 | |
| +
 | |
| +	/* Apply customized values from user */
 | |
| +	ret =  __v4l2_ctrl_handler_setup(imx477->sd.ctrl_handler);
 | |
| +	if (ret)
 | |
| +		return ret;
 | |
| +
 | |
| +	/* set stream on register */
 | |
| +	return imx477_write_reg(imx477, IMX477_REG_MODE_SELECT,
 | |
| +				IMX477_REG_VALUE_08BIT, IMX477_MODE_STREAMING);
 | |
| +}
 | |
| +
 | |
| +/* Stop streaming */
 | |
| +static void imx477_stop_streaming(struct imx477 *imx477)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	int ret;
 | |
| +
 | |
| +	/* set stream off register */
 | |
| +	ret = imx477_write_reg(imx477, IMX477_REG_MODE_SELECT,
 | |
| +			       IMX477_REG_VALUE_08BIT, IMX477_MODE_STANDBY);
 | |
| +	if (ret)
 | |
| +		dev_err(&client->dev, "%s failed to set stream\n", __func__);
 | |
| +}
 | |
| +
 | |
| +static int imx477_set_stream(struct v4l2_subdev *sd, int enable)
 | |
| +{
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(sd);
 | |
| +	int ret = 0;
 | |
| +
 | |
| +	mutex_lock(&imx477->mutex);
 | |
| +	if (imx477->streaming == enable) {
 | |
| +		mutex_unlock(&imx477->mutex);
 | |
| +		return 0;
 | |
| +	}
 | |
| +
 | |
| +	if (enable) {
 | |
| +		ret = pm_runtime_get_sync(&client->dev);
 | |
| +		if (ret < 0) {
 | |
| +			pm_runtime_put_noidle(&client->dev);
 | |
| +			goto err_unlock;
 | |
| +		}
 | |
| +
 | |
| +		/*
 | |
| +		 * Apply default & customized values
 | |
| +		 * and then start streaming.
 | |
| +		 */
 | |
| +		ret = imx477_start_streaming(imx477);
 | |
| +		if (ret)
 | |
| +			goto err_rpm_put;
 | |
| +	} else {
 | |
| +		imx477_stop_streaming(imx477);
 | |
| +		pm_runtime_put(&client->dev);
 | |
| +	}
 | |
| +
 | |
| +	imx477->streaming = enable;
 | |
| +
 | |
| +	/* vflip and hflip cannot change during streaming */
 | |
| +	__v4l2_ctrl_grab(imx477->vflip, enable);
 | |
| +	__v4l2_ctrl_grab(imx477->hflip, enable);
 | |
| +
 | |
| +	mutex_unlock(&imx477->mutex);
 | |
| +
 | |
| +	return ret;
 | |
| +
 | |
| +err_rpm_put:
 | |
| +	pm_runtime_put(&client->dev);
 | |
| +err_unlock:
 | |
| +	mutex_unlock(&imx477->mutex);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +/* Power/clock management functions */
 | |
| +static int imx477_power_on(struct device *dev)
 | |
| +{
 | |
| +	struct i2c_client *client = to_i2c_client(dev);
 | |
| +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +	int ret;
 | |
| +
 | |
| +	ret = regulator_bulk_enable(IMX477_NUM_SUPPLIES,
 | |
| +				    imx477->supplies);
 | |
| +	if (ret) {
 | |
| +		dev_err(&client->dev, "%s: failed to enable regulators\n",
 | |
| +			__func__);
 | |
| +		return ret;
 | |
| +	}
 | |
| +
 | |
| +	ret = clk_prepare_enable(imx477->xclk);
 | |
| +	if (ret) {
 | |
| +		dev_err(&client->dev, "%s: failed to enable clock\n",
 | |
| +			__func__);
 | |
| +		goto reg_off;
 | |
| +	}
 | |
| +
 | |
| +	gpiod_set_value_cansleep(imx477->reset_gpio, 1);
 | |
| +	usleep_range(IMX477_XCLR_MIN_DELAY_US,
 | |
| +		     IMX477_XCLR_MIN_DELAY_US + IMX477_XCLR_DELAY_RANGE_US);
 | |
| +
 | |
| +	return 0;
 | |
| +
 | |
| +reg_off:
 | |
| +	regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static int imx477_power_off(struct device *dev)
 | |
| +{
 | |
| +	struct i2c_client *client = to_i2c_client(dev);
 | |
| +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	gpiod_set_value_cansleep(imx477->reset_gpio, 0);
 | |
| +	regulator_bulk_disable(IMX477_NUM_SUPPLIES, imx477->supplies);
 | |
| +	clk_disable_unprepare(imx477->xclk);
 | |
| +
 | |
| +	/* Force reprogramming of the common registers when powered up again. */
 | |
| +	imx477->common_regs_written = false;
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int __maybe_unused imx477_suspend(struct device *dev)
 | |
| +{
 | |
| +	struct i2c_client *client = to_i2c_client(dev);
 | |
| +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	if (imx477->streaming)
 | |
| +		imx477_stop_streaming(imx477);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static int __maybe_unused imx477_resume(struct device *dev)
 | |
| +{
 | |
| +	struct i2c_client *client = to_i2c_client(dev);
 | |
| +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +	int ret;
 | |
| +
 | |
| +	if (imx477->streaming) {
 | |
| +		ret = imx477_start_streaming(imx477);
 | |
| +		if (ret)
 | |
| +			goto error;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +
 | |
| +error:
 | |
| +	imx477_stop_streaming(imx477);
 | |
| +	imx477->streaming = 0;
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static int imx477_get_regulators(struct imx477 *imx477)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	unsigned int i;
 | |
| +
 | |
| +	for (i = 0; i < IMX477_NUM_SUPPLIES; i++)
 | |
| +		imx477->supplies[i].supply = imx477_supply_name[i];
 | |
| +
 | |
| +	return devm_regulator_bulk_get(&client->dev,
 | |
| +				       IMX477_NUM_SUPPLIES,
 | |
| +				       imx477->supplies);
 | |
| +}
 | |
| +
 | |
| +/* Verify chip ID */
 | |
| +static int imx477_identify_module(struct imx477 *imx477, u32 expected_id)
 | |
| +{
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	int ret;
 | |
| +	u32 val;
 | |
| +
 | |
| +	ret = imx477_read_reg(imx477, IMX477_REG_CHIP_ID,
 | |
| +			      IMX477_REG_VALUE_16BIT, &val);
 | |
| +	if (ret) {
 | |
| +		dev_err(&client->dev, "failed to read chip id %x, with error %d\n",
 | |
| +			expected_id, ret);
 | |
| +		return ret;
 | |
| +	}
 | |
| +
 | |
| +	if (val != expected_id) {
 | |
| +		dev_err(&client->dev, "chip id mismatch: %x!=%x\n",
 | |
| +			expected_id, val);
 | |
| +		return -EIO;
 | |
| +	}
 | |
| +
 | |
| +	dev_info(&client->dev, "Device found is imx%x\n", val);
 | |
| +
 | |
| +	return 0;
 | |
| +}
 | |
| +
 | |
| +static const struct v4l2_subdev_core_ops imx477_core_ops = {
 | |
| +	.subscribe_event = v4l2_ctrl_subdev_subscribe_event,
 | |
| +	.unsubscribe_event = v4l2_event_subdev_unsubscribe,
 | |
| +};
 | |
| +
 | |
| +static const struct v4l2_subdev_video_ops imx477_video_ops = {
 | |
| +	.s_stream = imx477_set_stream,
 | |
| +};
 | |
| +
 | |
| +static const struct v4l2_subdev_pad_ops imx477_pad_ops = {
 | |
| +	.enum_mbus_code = imx477_enum_mbus_code,
 | |
| +	.get_fmt = imx477_get_pad_format,
 | |
| +	.set_fmt = imx477_set_pad_format,
 | |
| +	.get_selection = imx477_get_selection,
 | |
| +	.enum_frame_size = imx477_enum_frame_size,
 | |
| +};
 | |
| +
 | |
| +static const struct v4l2_subdev_ops imx477_subdev_ops = {
 | |
| +	.core = &imx477_core_ops,
 | |
| +	.video = &imx477_video_ops,
 | |
| +	.pad = &imx477_pad_ops,
 | |
| +};
 | |
| +
 | |
| +static const struct v4l2_subdev_internal_ops imx477_internal_ops = {
 | |
| +	.open = imx477_open,
 | |
| +};
 | |
| +
 | |
| +/* Initialize control handlers */
 | |
| +static int imx477_init_controls(struct imx477 *imx477)
 | |
| +{
 | |
| +	struct v4l2_ctrl_handler *ctrl_hdlr;
 | |
| +	struct i2c_client *client = v4l2_get_subdevdata(&imx477->sd);
 | |
| +	struct v4l2_fwnode_device_properties props;
 | |
| +	unsigned int i;
 | |
| +	int ret;
 | |
| +
 | |
| +	ctrl_hdlr = &imx477->ctrl_handler;
 | |
| +	ret = v4l2_ctrl_handler_init(ctrl_hdlr, 16);
 | |
| +	if (ret)
 | |
| +		return ret;
 | |
| +
 | |
| +	mutex_init(&imx477->mutex);
 | |
| +	ctrl_hdlr->lock = &imx477->mutex;
 | |
| +
 | |
| +	/* By default, PIXEL_RATE is read only */
 | |
| +	imx477->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					       V4L2_CID_PIXEL_RATE,
 | |
| +					       IMX477_PIXEL_RATE,
 | |
| +					       IMX477_PIXEL_RATE, 1,
 | |
| +					       IMX477_PIXEL_RATE);
 | |
| +
 | |
| +	/*
 | |
| +	 * Create the controls here, but mode specific limits are setup
 | |
| +	 * in the imx477_set_framing_limits() call below.
 | |
| +	 */
 | |
| +	imx477->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					   V4L2_CID_VBLANK, 0, 0xffff, 1, 0);
 | |
| +	imx477->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					   V4L2_CID_HBLANK, 0, 0xffff, 1, 0);
 | |
| +
 | |
| +	imx477->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					     V4L2_CID_EXPOSURE,
 | |
| +					     IMX477_EXPOSURE_MIN,
 | |
| +					     IMX477_EXPOSURE_MAX,
 | |
| +					     IMX477_EXPOSURE_STEP,
 | |
| +					     IMX477_EXPOSURE_DEFAULT);
 | |
| +
 | |
| +	v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_ANALOGUE_GAIN,
 | |
| +			  IMX477_ANA_GAIN_MIN, IMX477_ANA_GAIN_MAX,
 | |
| +			  IMX477_ANA_GAIN_STEP, IMX477_ANA_GAIN_DEFAULT);
 | |
| +
 | |
| +	v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops, V4L2_CID_DIGITAL_GAIN,
 | |
| +			  IMX477_DGTL_GAIN_MIN, IMX477_DGTL_GAIN_MAX,
 | |
| +			  IMX477_DGTL_GAIN_STEP, IMX477_DGTL_GAIN_DEFAULT);
 | |
| +
 | |
| +	imx477->hflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					  V4L2_CID_HFLIP, 0, 1, 1, 0);
 | |
| +	if (imx477->hflip)
 | |
| +		imx477->hflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 | |
| +
 | |
| +	imx477->vflip = v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					  V4L2_CID_VFLIP, 0, 1, 1, 0);
 | |
| +	if (imx477->vflip)
 | |
| +		imx477->vflip->flags |= V4L2_CTRL_FLAG_MODIFY_LAYOUT;
 | |
| +
 | |
| +	v4l2_ctrl_new_std_menu_items(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +				     V4L2_CID_TEST_PATTERN,
 | |
| +				     ARRAY_SIZE(imx477_test_pattern_menu) - 1,
 | |
| +				     0, 0, imx477_test_pattern_menu);
 | |
| +	for (i = 0; i < 4; i++) {
 | |
| +		/*
 | |
| +		 * The assumption is that
 | |
| +		 * V4L2_CID_TEST_PATTERN_GREENR == V4L2_CID_TEST_PATTERN_RED + 1
 | |
| +		 * V4L2_CID_TEST_PATTERN_BLUE   == V4L2_CID_TEST_PATTERN_RED + 2
 | |
| +		 * V4L2_CID_TEST_PATTERN_GREENB == V4L2_CID_TEST_PATTERN_RED + 3
 | |
| +		 */
 | |
| +		v4l2_ctrl_new_std(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +				  V4L2_CID_TEST_PATTERN_RED + i,
 | |
| +				  IMX477_TEST_PATTERN_COLOUR_MIN,
 | |
| +				  IMX477_TEST_PATTERN_COLOUR_MAX,
 | |
| +				  IMX477_TEST_PATTERN_COLOUR_STEP,
 | |
| +				  IMX477_TEST_PATTERN_COLOUR_MAX);
 | |
| +		/* The "Solid color" pattern is white by default */
 | |
| +	}
 | |
| +
 | |
| +	if (ctrl_hdlr->error) {
 | |
| +		ret = ctrl_hdlr->error;
 | |
| +		dev_err(&client->dev, "%s control init failed (%d)\n",
 | |
| +			__func__, ret);
 | |
| +		goto error;
 | |
| +	}
 | |
| +
 | |
| +	ret = v4l2_fwnode_device_parse(&client->dev, &props);
 | |
| +	if (ret)
 | |
| +		goto error;
 | |
| +
 | |
| +	ret = v4l2_ctrl_new_fwnode_properties(ctrl_hdlr, &imx477_ctrl_ops,
 | |
| +					      &props);
 | |
| +	if (ret)
 | |
| +		goto error;
 | |
| +
 | |
| +	imx477->sd.ctrl_handler = ctrl_hdlr;
 | |
| +
 | |
| +	/* Setup exposure and frame/line length limits. */
 | |
| +	imx477_set_framing_limits(imx477);
 | |
| +
 | |
| +	return 0;
 | |
| +
 | |
| +error:
 | |
| +	v4l2_ctrl_handler_free(ctrl_hdlr);
 | |
| +	mutex_destroy(&imx477->mutex);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static void imx477_free_controls(struct imx477 *imx477)
 | |
| +{
 | |
| +	v4l2_ctrl_handler_free(imx477->sd.ctrl_handler);
 | |
| +	mutex_destroy(&imx477->mutex);
 | |
| +}
 | |
| +
 | |
| +static int imx477_check_hwcfg(struct device *dev)
 | |
| +{
 | |
| +	struct fwnode_handle *endpoint;
 | |
| +	struct v4l2_fwnode_endpoint ep_cfg = {
 | |
| +		.bus_type = V4L2_MBUS_CSI2_DPHY
 | |
| +	};
 | |
| +	int ret = -EINVAL;
 | |
| +
 | |
| +	endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
 | |
| +	if (!endpoint) {
 | |
| +		dev_err(dev, "endpoint node not found\n");
 | |
| +		return -EINVAL;
 | |
| +	}
 | |
| +
 | |
| +	if (v4l2_fwnode_endpoint_alloc_parse(endpoint, &ep_cfg)) {
 | |
| +		dev_err(dev, "could not parse endpoint\n");
 | |
| +		goto error_out;
 | |
| +	}
 | |
| +
 | |
| +	/* Check the number of MIPI CSI2 data lanes */
 | |
| +	if (ep_cfg.bus.mipi_csi2.num_data_lanes != 2) {
 | |
| +		dev_err(dev, "only 2 data lanes are currently supported\n");
 | |
| +		goto error_out;
 | |
| +	}
 | |
| +
 | |
| +	/* Check the link frequency set in device tree */
 | |
| +	if (!ep_cfg.nr_of_link_frequencies) {
 | |
| +		dev_err(dev, "link-frequency property not found in DT\n");
 | |
| +		goto error_out;
 | |
| +	}
 | |
| +
 | |
| +	if (ep_cfg.nr_of_link_frequencies != 1 ||
 | |
| +	    ep_cfg.link_frequencies[0] != IMX477_DEFAULT_LINK_FREQ) {
 | |
| +		dev_err(dev, "Link frequency not supported: %lld\n",
 | |
| +			ep_cfg.link_frequencies[0]);
 | |
| +		goto error_out;
 | |
| +	}
 | |
| +
 | |
| +	ret = 0;
 | |
| +
 | |
| +error_out:
 | |
| +	v4l2_fwnode_endpoint_free(&ep_cfg);
 | |
| +	fwnode_handle_put(endpoint);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static const struct imx477_compatible_data imx477_compatible = {
 | |
| +	.chip_id = IMX477_CHIP_ID,
 | |
| +	.extra_regs = {
 | |
| +		.num_of_regs = 0,
 | |
| +		.regs = NULL
 | |
| +	}
 | |
| +};
 | |
| +
 | |
| +static const struct imx477_reg imx378_regs[] = {
 | |
| +	{0x3e35, 0x01},
 | |
| +	{0x4421, 0x08},
 | |
| +	{0x3ff9, 0x00},
 | |
| +};
 | |
| +
 | |
| +static const struct imx477_compatible_data imx378_compatible = {
 | |
| +	.chip_id = IMX378_CHIP_ID,
 | |
| +	.extra_regs = {
 | |
| +		.num_of_regs = ARRAY_SIZE(imx378_regs),
 | |
| +		.regs = imx378_regs
 | |
| +	}
 | |
| +};
 | |
| +
 | |
| +static const struct of_device_id imx477_dt_ids[] = {
 | |
| +	{ .compatible = "sony,imx477", .data = &imx477_compatible },
 | |
| +	{ .compatible = "sony,imx378", .data = &imx378_compatible },
 | |
| +	{ /* sentinel */ }
 | |
| +};
 | |
| +
 | |
| +static int imx477_probe(struct i2c_client *client)
 | |
| +{
 | |
| +	struct device *dev = &client->dev;
 | |
| +	struct imx477 *imx477;
 | |
| +	const struct of_device_id *match;
 | |
| +	int ret;
 | |
| +
 | |
| +	imx477 = devm_kzalloc(&client->dev, sizeof(*imx477), GFP_KERNEL);
 | |
| +	if (!imx477)
 | |
| +		return -ENOMEM;
 | |
| +
 | |
| +	v4l2_i2c_subdev_init(&imx477->sd, client, &imx477_subdev_ops);
 | |
| +
 | |
| +	match = of_match_device(imx477_dt_ids, dev);
 | |
| +	if (!match)
 | |
| +		return -ENODEV;
 | |
| +	imx477->compatible_data =
 | |
| +		(const struct imx477_compatible_data *)match->data;
 | |
| +
 | |
| +	/* Check the hardware configuration in device tree */
 | |
| +	if (imx477_check_hwcfg(dev))
 | |
| +		return -EINVAL;
 | |
| +
 | |
| +	/* Get system clock (xclk) */
 | |
| +	imx477->xclk = devm_clk_get(dev, NULL);
 | |
| +	if (IS_ERR(imx477->xclk)) {
 | |
| +		dev_err(dev, "failed to get xclk\n");
 | |
| +		return PTR_ERR(imx477->xclk);
 | |
| +	}
 | |
| +
 | |
| +	imx477->xclk_freq = clk_get_rate(imx477->xclk);
 | |
| +	if (imx477->xclk_freq != IMX477_XCLK_FREQ) {
 | |
| +		dev_err(dev, "xclk frequency not supported: %d Hz\n",
 | |
| +			imx477->xclk_freq);
 | |
| +		return -EINVAL;
 | |
| +	}
 | |
| +
 | |
| +	ret = imx477_get_regulators(imx477);
 | |
| +	if (ret) {
 | |
| +		dev_err(dev, "failed to get regulators\n");
 | |
| +		return ret;
 | |
| +	}
 | |
| +
 | |
| +	/* Request optional enable pin */
 | |
| +	imx477->reset_gpio = devm_gpiod_get_optional(dev, "reset",
 | |
| +						     GPIOD_OUT_HIGH);
 | |
| +
 | |
| +	/*
 | |
| +	 * The sensor must be powered for imx477_identify_module()
 | |
| +	 * to be able to read the CHIP_ID register
 | |
| +	 */
 | |
| +	ret = imx477_power_on(dev);
 | |
| +	if (ret)
 | |
| +		return ret;
 | |
| +
 | |
| +	ret = imx477_identify_module(imx477, imx477->compatible_data->chip_id);
 | |
| +	if (ret)
 | |
| +		goto error_power_off;
 | |
| +
 | |
| +	/* Initialize default format */
 | |
| +	imx477_set_default_format(imx477);
 | |
| +
 | |
| +	/* Enable runtime PM and turn off the device */
 | |
| +	pm_runtime_set_active(dev);
 | |
| +	pm_runtime_enable(dev);
 | |
| +	pm_runtime_idle(dev);
 | |
| +
 | |
| +	/* This needs the pm runtime to be registered. */
 | |
| +	ret = imx477_init_controls(imx477);
 | |
| +	if (ret)
 | |
| +		goto error_power_off;
 | |
| +
 | |
| +	/* Initialize subdev */
 | |
| +	imx477->sd.internal_ops = &imx477_internal_ops;
 | |
| +	imx477->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE |
 | |
| +			    V4L2_SUBDEV_FL_HAS_EVENTS;
 | |
| +	imx477->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
 | |
| +
 | |
| +	/* Initialize source pads */
 | |
| +	imx477->pad[IMAGE_PAD].flags = MEDIA_PAD_FL_SOURCE;
 | |
| +	imx477->pad[METADATA_PAD].flags = MEDIA_PAD_FL_SOURCE;
 | |
| +
 | |
| +	ret = media_entity_pads_init(&imx477->sd.entity, NUM_PADS, imx477->pad);
 | |
| +	if (ret) {
 | |
| +		dev_err(dev, "failed to init entity pads: %d\n", ret);
 | |
| +		goto error_handler_free;
 | |
| +	}
 | |
| +
 | |
| +	ret = v4l2_async_register_subdev_sensor(&imx477->sd);
 | |
| +	if (ret < 0) {
 | |
| +		dev_err(dev, "failed to register sensor sub-device: %d\n", ret);
 | |
| +		goto error_media_entity;
 | |
| +	}
 | |
| +
 | |
| +	return 0;
 | |
| +
 | |
| +error_media_entity:
 | |
| +	media_entity_cleanup(&imx477->sd.entity);
 | |
| +
 | |
| +error_handler_free:
 | |
| +	imx477_free_controls(imx477);
 | |
| +
 | |
| +error_power_off:
 | |
| +	pm_runtime_disable(&client->dev);
 | |
| +	pm_runtime_set_suspended(&client->dev);
 | |
| +	imx477_power_off(&client->dev);
 | |
| +
 | |
| +	return ret;
 | |
| +}
 | |
| +
 | |
| +static void imx477_remove(struct i2c_client *client)
 | |
| +{
 | |
| +	struct v4l2_subdev *sd = i2c_get_clientdata(client);
 | |
| +	struct imx477 *imx477 = to_imx477(sd);
 | |
| +
 | |
| +	v4l2_async_unregister_subdev(sd);
 | |
| +	media_entity_cleanup(&sd->entity);
 | |
| +	imx477_free_controls(imx477);
 | |
| +
 | |
| +	pm_runtime_disable(&client->dev);
 | |
| +	if (!pm_runtime_status_suspended(&client->dev))
 | |
| +		imx477_power_off(&client->dev);
 | |
| +	pm_runtime_set_suspended(&client->dev);
 | |
| +}
 | |
| +
 | |
| +MODULE_DEVICE_TABLE(of, imx477_dt_ids);
 | |
| +
 | |
| +static const struct dev_pm_ops imx477_pm_ops = {
 | |
| +	SET_SYSTEM_SLEEP_PM_OPS(imx477_suspend, imx477_resume)
 | |
| +	SET_RUNTIME_PM_OPS(imx477_power_off, imx477_power_on, NULL)
 | |
| +};
 | |
| +
 | |
| +static struct i2c_driver imx477_i2c_driver = {
 | |
| +	.driver = {
 | |
| +		.name = "imx477",
 | |
| +		.of_match_table	= imx477_dt_ids,
 | |
| +		.pm = &imx477_pm_ops,
 | |
| +	},
 | |
| +	.probe_new = imx477_probe,
 | |
| +	.remove = imx477_remove,
 | |
| +};
 | |
| +
 | |
| +module_i2c_driver(imx477_i2c_driver);
 | |
| +
 | |
| +MODULE_AUTHOR("Naushir Patuck <naush@raspberrypi.com>");
 | |
| +MODULE_DESCRIPTION("Sony IMX477 sensor driver");
 | |
| +MODULE_LICENSE("GPL v2");
 |