openmptcprouter/6.12/target/linux/bcm27xx/patches-6.12/950-0321-input-goodix-Add-option-to-poll-instead-of-relying-o.patch

From f15346d0f92c0d16f4e6f51f852c94bde42c6d1a Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Mon, 30 Jan 2023 14:46:16 +0000
Subject: [PATCH 321/697] input: goodix: Add option to poll instead of relying
 on IRQ line

The interrupt line from the touch controller is not necessarily
connected to the SoC, so add the option to poll for touch info.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>

input: goodix: Include I2C details in names for the devices

libinput uses the input device name alone. If you have two
identical input devices, then there is no way to differentiate
between them, and in the case of touchscreens that means no
way to associate them with the appropriate display device.

Add the I2C bus and address to the start of the input device
name so that the name is always unique within the system.

Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
 drivers/input/touchscreen/goodix.c | 75 +++++++++++++++++++++++++++---
 drivers/input/touchscreen/goodix.h |  5 ++
 2 files changed, 73 insertions(+), 7 deletions(-)

--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -48,6 +48,8 @@
 #define MAX_CONTACTS_LOC	5
 #define TRIGGER_LOC		6
 
+#define POLL_INTERVAL_MS		17	/* 17ms = 60fps */
+
 /* Our special handling for GPIO accesses through ACPI is x86 specific */
 #if defined CONFIG_X86 && defined CONFIG_ACPI
 #define ACPI_GPIO_SUPPORT
@@ -513,16 +515,67 @@ static irqreturn_t goodix_ts_irq_handler
 	return IRQ_HANDLED;
 }
 
+static void goodix_ts_irq_poll_timer(struct timer_list *t)
+{
+	struct goodix_ts_data *ts = from_timer(ts, t, timer);
+
+	schedule_work(&ts->work_i2c_poll);
+	mod_timer(&ts->timer, jiffies + msecs_to_jiffies(POLL_INTERVAL_MS));
+}
+
+static void goodix_ts_work_i2c_poll(struct work_struct *work)
+{
+	struct goodix_ts_data *ts = container_of(work,
+			struct goodix_ts_data, work_i2c_poll);
+
+	goodix_process_events(ts);
+	goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0);
+}
+
+static void goodix_enable_irq(struct goodix_ts_data *ts)
+{
+	if (ts->client->irq) {
+		enable_irq(ts->client->irq);
+	} else {
+		ts->timer.expires = jiffies + msecs_to_jiffies(POLL_INTERVAL_MS);
+		add_timer(&ts->timer);
+	}
+}
+
+static void goodix_disable_irq(struct goodix_ts_data *ts)
+{
+	if (ts->client->irq) {
+		disable_irq(ts->client->irq);
+	} else {
+		del_timer(&ts->timer);
+		cancel_work_sync(&ts->work_i2c_poll);
+	}
+}
+
 static void goodix_free_irq(struct goodix_ts_data *ts)
 {
-	devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+	if (ts->client->irq) {
+		devm_free_irq(&ts->client->dev, ts->client->irq, ts);
+	} else {
+		del_timer(&ts->timer);
+		cancel_work_sync(&ts->work_i2c_poll);
+	}
 }
 
 static int goodix_request_irq(struct goodix_ts_data *ts)
 {
-	return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
-					 NULL, goodix_ts_irq_handler,
-					 ts->irq_flags, ts->client->name, ts);
+	if (ts->client->irq) {
+		return devm_request_threaded_irq(&ts->client->dev, ts->client->irq,
+						 NULL, goodix_ts_irq_handler,
+						 ts->irq_flags, ts->client->name, ts);
+	} else {
+		INIT_WORK(&ts->work_i2c_poll,
+			  goodix_ts_work_i2c_poll);
+		timer_setup(&ts->timer, goodix_ts_irq_poll_timer, 0);
+		if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE)
+			goodix_enable_irq(ts);
+		return 0;
+	}
 }
 
 static int goodix_check_cfg_8(struct goodix_ts_data *ts, const u8 *cfg, int len)
@@ -1141,7 +1194,10 @@ static int goodix_configure_dev(struct g
 		return -ENOMEM;
 	}
 
-	ts->input_dev->name = "Goodix Capacitive TouchScreen";
+	snprintf(ts->name, GOODIX_NAME_MAX_LEN, "%s Goodix Capacitive TouchScreen",
+		 dev_name(&ts->client->dev));
+
+	ts->input_dev->name = ts->name;
 	ts->input_dev->phys = "input/ts";
 	ts->input_dev->id.bustype = BUS_I2C;
 	ts->input_dev->id.vendor = 0x0416;
@@ -1407,6 +1463,11 @@ static void goodix_ts_remove(struct i2c_
 {
 	struct goodix_ts_data *ts = i2c_get_clientdata(client);
 
+	if (!client->irq) {
+		del_timer(&ts->timer);
+		cancel_work_sync(&ts->work_i2c_poll);
+	}
+
 	if (ts->load_cfg_from_disk)
 		wait_for_completion(&ts->firmware_loading_complete);
 }
@@ -1422,7 +1483,7 @@ static int goodix_suspend(struct device
 
 	/* We need gpio pins to suspend/resume */
 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
-		disable_irq(client->irq);
+		goodix_disable_irq(ts);
 		return 0;
 	}
 
@@ -1466,7 +1527,7 @@ static int goodix_resume(struct device *
 	int error;
 
 	if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) {
-		enable_irq(client->irq);
+		goodix_enable_irq(ts);
 		return 0;
 	}
 
--- a/drivers/input/touchscreen/goodix.h
+++ b/drivers/input/touchscreen/goodix.h
@@ -57,6 +57,8 @@
 #define GOODIX_CONFIG_MAX_LENGTH		240
 #define GOODIX_MAX_KEYS				7
 
+#define GOODIX_NAME_MAX_LEN			38
+
 enum goodix_irq_pin_access_method {
 	IRQ_PIN_ACCESS_NONE,
 	IRQ_PIN_ACCESS_GPIO,
@@ -91,6 +93,7 @@ struct goodix_ts_data {
 	enum gpiod_flags gpiod_rst_flags;
 	char id[GOODIX_ID_MAX_LEN + 1];
 	char cfg_name[64];
+	char name[GOODIX_NAME_MAX_LEN];
 	u16 version;
 	bool reset_controller_at_probe;
 	bool load_cfg_from_disk;
@@ -104,6 +107,8 @@ struct goodix_ts_data {
 	u8 main_clk[GOODIX_MAIN_CLK_LEN];
 	int bak_ref_len;
 	u8 *bak_ref;
+	struct timer_list timer;
+	struct work_struct work_i2c_poll;
 };
 
 int goodix_i2c_read(struct i2c_client *client, u16 reg, u8 *buf, int len);