mptcp/openmptcprouter
1
0
Fork 0
mirror of https://github.com/Ysurac/openmptcprouter.git synced 2025-02-15 04:42:02 +00:00
Code Issues Releases Wiki Activity
openmptcprouter/root/target/linux/bcm27xx/patches-5.15/950-0592-ARM-dts-Update-rpi-400-and-cm4-dts-to-match-4-b.patch
Ycarus (Yannick Chabanois) 07d07219be Update bcm27xx 5.15 patches
2022-04-22 17:00:47 +02:00

334 lines
7 KiB
Diff
Raw Blame History

From c711c2e1684eb79b34f32053766d888da91083e0 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.com>
Date: Fri, 26 Nov 2021 15:20:06 +0000
Subject: [PATCH 592/828] ARM: dts: Update rpi-400 and cm4 dts to match 4-b
The Pi 4B dts file has had numerous updates since the Pi 400 and CM4
dts files were written. Apply those updates to the other files to
minimise the differences. The change is largely cosmetic, except for
the PCI "device-type" to "device_type" rename, and the correction of
the labels on the Pi 400 GPIO expander pins.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
---
arch/arm/boot/dts/bcm2711-rpi-400.dts | 90 ++++--------------------
arch/arm/boot/dts/bcm2711-rpi-cm4.dts | 98 ++++++---------------------
2 files changed, 36 insertions(+), 152 deletions(-)
--- a/arch/arm/boot/dts/bcm2711-rpi-400.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-400.dts
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include "bcm2711-rpi.dtsi"
+//#include "bcm283x-rpi-usb-peripheral.dtsi"
/ {
compatible = "raspberrypi,400", "brcm,bcm2711";
@@ -14,19 +13,6 @@
stdout-path = "serial1:115200n8";
};
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- emmc2bus = &emmc2bus;
- ethernet0 = &genet;
- pcie0 = &pcie0;
- blconfig = &blconfig;
- };
-
leds {
led-act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -54,8 +40,8 @@
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
status = "okay";
};
@@ -78,31 +64,15 @@
status = "okay";
};
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "GLOBAL_RESET",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "SD_PWR_ON",
- "SD_OC_N";
- status = "okay";
- };
-
- reset: reset {
- compatible = "raspberrypi,firmware-reset";
- #reset-cells = <1>;
- };
+&expgpio {
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "PWR_LED_OFF",
+ "GLOBAL_RESET",
+ "VDD_SD_IO_SEL",
+ "GLOBAL_SHUTDOWN",
+ "SD_PWR_ON",
+ "SHUTDOWN_REQUEST";
};
&gpio {
@@ -179,23 +149,13 @@
};
&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
-&hvs {
- clocks = <&firmware_clocks 4>;
-};
-
&pixelvalve0 {
status = "okay";
};
@@ -218,22 +178,6 @@
status = "okay";
};
-&rmem {
- /*
- * RPi4's co-processor will copy the board's bootloader configuration
- * into memory for the OS to consume. It'll also update this node with
- * its placement information.
- */
- blconfig: nvram@0 {
- compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x0>;
- no-map;
- status = "disabled";
- };
-};
-
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
@@ -274,7 +218,7 @@
&pcie0 {
pci@0,0 {
- device-type = "pci";
+ device_type = "pci";
#address-cells = <3>;
#size-cells = <2>;
ranges;
@@ -282,7 +226,7 @@
reg = <0 0 0 0 0>;
usb@0,0 {
- reg = <0x0 0 0 0 0>;
+ reg = <0 0 0 0 0>;
resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
};
};
@@ -309,10 +253,6 @@
status = "okay";
};
-&vchiq {
- interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
-};
-
&vc4 {
status = "okay";
};
--- a/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-cm4.dts
@@ -1,9 +1,8 @@
// SPDX-License-Identifier: GPL-2.0
/dts-v1/;
#include "bcm2711.dtsi"
-#include "bcm2835-rpi.dtsi"
-
-#include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include "bcm2711-rpi.dtsi"
+//#include "bcm283x-rpi-usb-peripheral.dtsi"
/ {
compatible = "raspberrypi,4-compute-module", "brcm,bcm2711";
@@ -14,19 +13,6 @@
stdout-path = "serial1:115200n8";
};
- /* Will be filled by the bootloader */
- memory@0 {
- device_type = "memory";
- reg = <0 0 0>;
- };
-
- aliases {
- emmc2bus = &emmc2bus;
- ethernet0 = &genet;
- pcie0 = &pcie0;
- blconfig = &blconfig;
- };
-
leds {
led-act {
gpios = <&gpio 42 GPIO_ACTIVE_HIGH>;
@@ -54,8 +40,8 @@
regulator-always-on;
regulator-settling-time-us = <5000>;
gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
- states = <1800000 0x1
- 3300000 0x0>;
+ states = <1800000 0x1>,
+ <3300000 0x0>;
status = "okay";
};
@@ -78,42 +64,26 @@
status = "okay";
};
-&firmware {
- firmware_clocks: clocks {
- compatible = "raspberrypi,firmware-clocks";
- #clock-cells = <1>;
- };
-
- expgpio: gpio {
- compatible = "raspberrypi,firmware-gpio";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-line-names = "BT_ON",
- "WL_ON",
- "PWR_LED_OFF",
- "ANT1",
- "VDD_SD_IO_SEL",
- "CAM_GPIO",
- "SD_PWR_ON",
- "ANT2";
- status = "okay";
-
- ant1: ant1 {
- gpio-hog;
- gpios = <3 GPIO_ACTIVE_HIGH>;
- output-high;
- };
-
- ant2: ant2 {
- gpio-hog;
- gpios = <7 GPIO_ACTIVE_HIGH>;
- output-low;
- };
- };
-
- reset: reset {
- compatible = "raspberrypi,firmware-reset";
- #reset-cells = <1>;
+&expgpio {
+ gpio-line-names = "BT_ON",
+ "WL_ON",
+ "PWR_LED_OFF",
+ "ANT1",
+ "VDD_SD_IO_SEL",
+ "CAM_GPIO",
+ "SD_PWR_ON",
+ "ANT2";
+
+ ant1: ant1 {
+ gpio-hog;
+ gpios = <3 GPIO_ACTIVE_HIGH>;
+ output-high;
+ };
+
+ ant2: ant2 {
+ gpio-hog;
+ gpios = <7 GPIO_ACTIVE_HIGH>;
+ output-low;
};
};
@@ -191,23 +161,13 @@
};
&hdmi0 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 0>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
&hdmi1 {
- clocks = <&firmware_clocks 13>, <&firmware_clocks 14>, <&dvp 1>, <&clk_27MHz>;
- clock-names = "hdmi", "bvb", "audio", "cec";
- wifi-2.4ghz-coexistence;
status = "okay";
};
-&hvs {
- clocks = <&firmware_clocks 4>;
-};
-
&pixelvalve0 {
status = "okay";
};
@@ -230,22 +190,6 @@
status = "okay";
};
-&rmem {
- /*
- * RPi4's co-processor will copy the board's bootloader configuration
- * into memory for the OS to consume. It'll also update this node with
- * its placement information.
- */
- blconfig: nvram@0 {
- compatible = "raspberrypi,bootloader-config", "nvmem-rmem";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x0 0x0 0x0>;
- no-map;
- status = "disabled";
- };
-};
-
/* SDHCI is used to control the SDIO for wireless */
&sdhci {
#address-cells = <1>;
Reference in a new issue View git blame Copy permalink